共查询到20条相似文献，搜索用时 245 毫秒
1.
Three-dimensional (3D) data from airborne laser scanning (ALS) and, more recently, digital aerial photogrammetry (DAP) have been successfully used to model forest attributes. While multi-temporal, wall-to-wall ALS data is not usually available, aerial imagery is regularly acquired in many regions. Thus, the combination of ALS and DAP data provide a sufficient temporal resolution to properly monitor forests. However, field data is needed to fit new forest attribute models for each 3D data acquisition, which is not always affordable. In this study, we examined whether transferability of growing stock volume (GSV) models may provide an improvement in the efficiency of forest inventories updating. We used two available ALS datasets acquired with different characteristics in 2009 and 2010, respectively, generated two DAP point clouds from imagery collected in 2010 and 2017, and utilized field data from two ground surveys conducted in 2009 and 2016-2017. We first analyzed the stability of point cloud derived metrics. Then, Support Vector Regression models based on the most stable metrics were fitted to assess model transferability by applying them to other datasets in four different cases: (1) ALS-ALS, (2) DAP-DAP temporal, (3) ALS-DAP and (4) ALS-DAP temporal. Some metrics were found to be enough stable in each case, so they could be used interchangeably between datasets. The application of models to other datasets resulted in unbiased predictions with relative root mean square error differences ranging from -8.27% to 14.59%. Results demonstrated that 3D-based GSV models may be transferable between point clouds of the same type as well as point clouds acquired using different technologies such as ALS and DAP, suggesting that DAP data may be used as a cost-efficient source of information for updating ALS-assisted forest inventories. 相似文献
2.
Tree species composition of forest stand is an important indicator of forest inventory attributes for assessing ecosystem health, understanding successional processes, and digitally displaying forest biodiversity. In this study, we acquired high spatial resolution multispectral and RGB imagery over a subtropical natural forest in southwest China using a fixed-wing UAV system. Digital aerial photogrammetric (DAP) technique was used to generate multi-spectral and RGB derived point clouds, upon which individual tree crown (ITC) delineation algorithms and a machine learning classifier were used to identify dominant tree species. To do so, the structure-from-motion method was used to generate RGB imagery-based DAP point clouds. Then, three ITC delineation algorithms (i.e., point cloud segmentation (PCS), image-based multiresolution segmentation (IMRS), and advanced multiresolution segmentation (AMRS)) were used and assessed for ITC detection. Finally, tree-level metrics (i.e., multispectral, texture and point cloud metrics) were used as metrics in the random forest classifier used to classify eight dominant tree species. Results indicated that the accuracy of the AMRS ITC segmentation was highest (F1-score = 82.5 %), followed by the segmentation using PCS (F1-score = 79.6 %), the IMRS exhibited the lowest accuracy (F1-score = 78.6 %); forest types classification (coniferous and deciduous) had a higher accuracy than the classification of all eight tree species, and the combination of spectral, texture and structural metrics had the highest classification accuracy (overall accuracy = 80.20 %). In the classification of both eight tree species and two forest types, the classification accuracies were lowest when only using spectral metrics, indicated that the texture metrics and point cloud structural metrics had a positive impact on the classification (the overall accuracy and kappa accuracy increased by 1.49–4.46 % and 2.86–6.84 %, respectively). 相似文献
3.
The demand for precise mapping and monitoring of forest resources, such as above ground biomass (AGB), has increased rapidly. National accounting and monitoring of AGB requires regularly updated information based on consistent methods. While remote sensing technologies such as airborne laser scanning (ALS) and digital aerial photogrammetry (DAP) have been shown to deliver the necessary 3D spatial data for AGB mapping, the capacity of repeat acquisition, remotely sensed, vegetation structure data for AGB monitoring has received less attention. Here, we use vegetation height models (VHMs) derived from repeat acquisition DAP data (with ALS terrain correction) to map and monitor woody AGB dynamics across Switzerland over 35 years (1983-2017 inclusive), using a linear least-squares regression approach. We demonstrate a consistent relationship between canopy height derived from DAP and field-based NFI measures of woody AGB across four inventory periods. Over the environmentally heterogeneous area of Switzerland, our models have a comparable predictive performance (R2 = 0.54) to previous work predicting AGB based on ALS metrics. Pearson correlation coefficients between measured and predicted changes in woody AGB over time increased with shorter time gaps (< 2 years) between image capture and field-based measurements, ranging between 0.76 and 0.34. A close temporal match between field surveys and remote sensing data acquisition is thus key to reliable mapping and monitoring of AGB dynamics, especially in areas where forest management and natural disturbances trigger relatively fast canopy dynamics. We show that VHMs derived from repeat DAP capture constitute a cost effective and reliable approach to map and monitor changes in woody AGB at a national extent and can provide an important information source for national carbon accounting and monitoring of ecosystem service provisioning. 相似文献
4.
Site productivity and forest growth are critical inputs into projecting wood volume and biomass accumulation over time. Site productivity, which is determined most commonly using site index models is also the primary criterion to consider many forest management decisions. Most of the previous research utilizing the remote sensing data for assessment of site index with forest height are based on the existing site index models developed with traditional dendrometric methods. However, these traditional methods are both time-consuming and expensive. This study demonstrates how bi-temporal airborne laser scanning (ALS) data collected within the 8-year period can be used for the development of site index models for Scots pine. The accuracy of ALS-derived models was assessed by comparison to the reference site index model developed based on data from stem analysis of 174 felled Scots pine trees. We evaluated the effect of different height metrics and grid cell size on the trajectory of site index models developed from ALS-derived measurements. Four methods of estimating top height from ALS point clouds were evaluated: 95th, 99th and 100th percentiles of point clouds and an individual tree detection approach (ITD). The models were created for a range of grid cell sizes: 10 × 10 m, 30 × 30 m, and 50 × 50 m. The results indicate that bitemporal ALS data could substitute traditional methods that have been applied to date for stand growth modelling. It was found that top height increment can be estimated by using both ITD approach and the 100th percentile of point cloud giving an appropriate top height (TH) increment estimation. Observed growth curves of reference trees agreed best with the trajectories that were obtained based on TH calculated using ITD method (R2 = 0.892) and 100th percentile (R2 = 0.797). In case of TH obtained from 99th and 95th percentiles only weak correlation was found: R2 = 0.358 and R2 = 0.213, accordingly. The height growth models developed with 95th and 99th percentiles of point cloud were not compatible with the reference model. We also found that grid cell size did not affect the model height growth trajectories. Irrespective of the grid cell size, the obtained model trajectories for the given method of TH estimation are nearly identical for cells 10 × 10, 30 × 30 and 50 × 50 m. 相似文献
5.
Recent research results have shown that the performance of digital surface model extraction using novel high-quality photogrammetric images and image matching is a highly competitive alternative to laser scanning. In this article, we proceed to compare the performance of these two methods in the estimation of plot-level forest variables. Dense point clouds extracted from aerial frame images were used to estimate the plot-level forest variables needed in a forest inventory covering 89 plots. We analyzed images with 60% and 80% forward overlaps and used test plots with off-nadir angles of between 0° and 20°. When compared to reference ground measurements, the airborne laser scanning (ALS) data proved to be the most accurate: it yielded root mean square error (RMSE) values of 6.55% for mean height, 11.42% for mean diameter, and 20.72% for volume. When we applied a forward overlap of 80%, the corresponding results from aerial images were 6.77% for mean height, 12.00% for mean diameter, and 22.62% for volume. A forward overlap of 60% resulted in slightly deteriorated RMSE values of 7.55% for mean height, 12.20% for mean diameter, and 22.77% for volume. According to our results, the use of higher forward overlap produced only slightly better results in the estimation of these forest variables. Additionally, we found that the estimation accuracy was not significantly impacted by the increase in the off-nadir angle. Our results confirmed that digital aerial photographs were about as accurate as ALS in forest resources estimation as long as a terrain model was available. 相似文献
6.
地基激光雷达的玉兰林冠层叶面积密度反演 总被引：1，自引：0，他引：1
叶面积密度LAD(Leaf Area Density)是表征冠层内部叶面积垂直分布的重要参数,其分布廓线的准确反演对研究植被碳氮循环、初级生产力和生物量估算等具有重要意义。本文在电子科技大学校内建立实验样区,利用地基激光雷达Leica Scan Station C10和数码相机获取玉兰林高分辨率3维激光点云数据和真彩色影像。利用监督分类将真彩色影像中枝干等非光合组织与叶片分离,再将像素分类信息映射给点云数据,从而提取叶片点云。通过点云数据体元化,并引入2维凸包算法确定垂直方向分层树冠边界,获取激光接触冠层的频率;随机选择不同高度的多个叶片,利用特征值法进行叶片平面拟合,估算出叶倾角,并结合天顶角估算叶倾角校正因子;最后基于体元的冠层分析VCP(Voxel-based Canopy Profiling)方法实现树林冠层LAD反演。结果表明体元化的叶片点云数据能准确确定树林冠层边界和统计接触频率实现LAD反演;反演的LAD变化走势与区域林木冠层叶片垂直分布相吻合,在冠层中下部随着高度的增加叶面积密度也随之增加,在4 m高度处达到最大值1 m2/m3,之后随着高度的增加叶面积密度逐渐降低。根据LAD计算得到的累积叶面积指数LAI为3.20 m2/m2,与LAI-2200实测的叶面积指数相比,相对误差为1.26%。 相似文献
7.
To support the adoption of precision agricultural practices in horticultural tree crops, prior research has investigated the relationship between crop vigour (height, canopy density, health) as measured by remote sensing technologies, to fruit quality, yield and pruning requirements. However, few studies have compared the accuracy of different remote sensing technologies for the estimation of tree height. In this study, we evaluated the accuracy, flexibility, aerial coverage and limitations of five techniques to measure the height of two types of horticultural tree crops, mango and avocado trees. Canopy height estimates from Terrestrial Laser Scanning (TLS) were used as a reference dataset against height estimates from Airborne Laser Scanning (ALS) data, WorldView-3 (WV-3) stereo imagery, Unmanned Aerial Vehicle (UAV) based RGB and multi-spectral imagery, and field measurements. Overall, imagery obtained from the UAV platform were found to provide tree height measurement comparable to that from the TLS (R2 = 0.89, RMSE = 0.19 m and rRMSE = 5.37 % for mango trees; R2 = 0.81, RMSE = 0.42 m and rRMSE = 4.75 % for avocado trees), although coverage area is limited to 1–10 km2 due to battery life and line-of-sight flight regulations. The ALS data also achieved reasonable accuracy for both mango and avocado trees (R2 = 0.67, RMSE = 0.24 m and rRMSE = 7.39 % for mango trees; R2 = 0.63, RMSE = 0.43 m and rRMSE = 5.04 % for avocado trees), providing both optimal point density and flight altitude, and therefore offers an effective platform for large areas (10 km2–100 km2). However, cost and availability of ALS data is a consideration. WV-3 stereo imagery produced the lowest accuracies for both tree crops (R2 = 0.50, RMSE = 0.84 m and rRMSE = 32.64 % for mango trees; R2 = 0.45, RMSE = 0.74 m and rRMSE = 8.51 % for avocado trees) when compared to other remote sensing platforms, but may still present a viable option due to cost and commercial availability when large area coverage is required. This research provides industries and growers with valuable information on how to select the most appropriate approach and the optimal parameters for each remote sensing platform to assess canopy height for mango and avocado trees. 相似文献
8.
Antonio Luis Montealegre-Gracia María Teresa Lamelas-Gracia Alberto García-Martín Juan de la Riva-Fernández Francisco Escribano-Bernal 《地理信息系统科学与遥感》2017,54(5):721-740
The aim of study is to map the carbon dioxide (CO2) emission of the aboveground tree biomass (AGB) in case of a fire event. The suitability of low point density, discrete, multiple-return, Airborne Laser Scanning (ALS) data and the influence of several characteristics of these data and the study area on the results obtained have been evaluated. A sample of 45 circular plots representative of Pinus halepensis Miller stands were used to fit and validate the model of AGB. The ALS point clouds were processed to obtain the independent variables and a multivariate linear regression analysis between field data and ALS-derived variables allowed estimation of AGB. Then, the influence of several characteristics on the residuals of the model was analyzed. Finally, conversion factors were applied to obtain the CO2 values. The AGB model presented a R2 value of 0.84 with a relative root-mean-square error of 27.35%. This model included ALS variables related to vegetation height variability and to canopy density. Terrain slope, aspect, canopy cover, scan angle and the number of laser returns did not influence AGB estimations at plot level. 相似文献
9.
In the past two decades Object-Based Image Analysis (OBIA) established itself as an efficient approach for the classification and extraction of information from remote sensing imagery and, increasingly, from non-image based sources such as Airborne Laser Scanner (ALS) point clouds. ALS data is represented in the form of a point cloud with recorded multiple returns and intensities. In our work, we combined OBIA with ALS point cloud data in order to identify and extract buildings as 2D polygons representing roof outlines in a top down mapping approach. We performed rasterization of the ALS data into a height raster for the purpose of the generation of a Digital Surface Model (DSM) and a derived Digital Elevation Model (DEM). Further objects were generated in conjunction with point statistics from the linked point cloud. With the use of class modelling methods, we generated the final target class of objects representing buildings. The approach was developed for a test area in Biberach an der Riß (Germany). In order to point out the possibilities of the adaptation-free transferability to another data set, the algorithm has been applied “as is” to the ISPRS Benchmarking data set of Toronto (Canada). The obtained results show high accuracies for the initial study area (thematic accuracies of around 98%, geometric accuracy of above 80%). The very high performance within the ISPRS Benchmark without any modification of the algorithm and without any adaptation of parameters is particularly noteworthy. 相似文献
10.
Mariano García F. Mark Danson David Riaño Emilio Chuvieco F. Alberto Ramirez Vishal Bandugula 《International Journal of Applied Earth Observation and Geoinformation》2011
This paper evaluates the potential of a terrestrial laser scanner (TLS) to characterize forest canopy fuel characteristics at plot level. Several canopy properties, namely canopy height, canopy cover, canopy base height and fuel strata gap were estimated. Different approaches were tested to avoid the effect of canopy shadowing on canopy height estimation caused by deployment of the TLS below the canopy. Estimation of canopy height using a grid approach provided a coefficient of determination of R2 = 0.81 and an RMSE of 2.47 m. A similar RMSE was obtained using the 99th percentile of the height distribution of the highest points, representing the 1% of the data, although the coefficient of determination was lower (R2 = 0.70). Canopy cover (CC) was estimated as a function of the occupied cells of a grid superimposed upon the TLS point clouds. It was found that CC estimates were dependent on the cell size selected, with 3 cm being the optimum resolution for this study. The effect of the zenith view angle on CC estimates was also analyzed. A simple method was developed to estimate canopy base height from the vegetation vertical profiles derived from an occupied/non-occupied voxels approach. Canopy base height was estimated with an RMSE of 3.09 m and an R2 = 0.86. Terrestrial laser scanning also provides a unique opportunity to estimate the fuel strata gap (FSG), which has not been previously derived from remotely sensed data. The FSG was also derived from the vegetation vertical profile with an RMSE of 1.53 m and an R2 = 0.87. 相似文献
11.
A computational canopy volume (CCV) based on airborne laser scanning (ALS) data is proposed to improve predictions of forest biomass and other related attributes like stem volume and basal area. An approach to derive the CCV based on computational geometry, topological connectivity and numerical optimization was tested with sparse-density, plot-level ALS data acquired from 40 field sample plots of 500–1000 m2 located in a boreal forest in Norway. The CCV had a high correspondence with the biomass attributes considered when derived from optimized filtrations, i.e. ordered sets of simplices belonging to the triangulations based on the point data. Coefficients of determination (R2) between the CCV and total above-ground biomass, canopy biomass, stem volume, and basal area were 0.88–0.89, 0.89, 0.83–0.97, and 0.88–0.92, respectively, depending on the applied filtration. The magnitude of the required filtration was found to increase according to an increasing basal area, which indicated a possibility to predict this magnitude by means of ALS-based height and density metrics. A simple prediction model provided CCVs which had R2 of 0.77–0.90 with the aforementioned forest attributes. The derived CCVs always produced complementary information and were mainly able to improve the predictions of forest biomass relative to models based on the height and density metrics, yet only by 0–1.9 percentage points in terms of relative root mean squared error. Possibilities to improve the CCVs by a further analysis of topological persistence are discussed. 相似文献
12.
Forest monitoring tools are needed to promote effective and data driven forest management and forest policies. Remote sensing techniques can increase the speed and the cost-efficiency of the forest monitoring as well as large scale mapping of forest attribute (wall-to-wall approach). Digital Aerial Photogrammetry (DAP) is a common cost-effective alternative to airborne laser scanning (ALS) which can be based on aerial photos routinely acquired for general base maps. DAP based on such pre-existing dataset can be a cost effective source of large scale 3D data. In the context of forest characterization, when a quality Digital Terrain Model (DTM) is available, DAP can produce photogrammetric Canopy Height Model (pCHM) which describes the tree canopy height. While this potential seems pretty obvious, few studies have investigated the quality of regional pCHM based on aerial stereo images acquired by standard official aerial surveys. Our study proposes to evaluate the quality of pCHM individual tree height estimates based on raw images acquired following such protocol using a reference filed-measured tree height database. To further ensure the replicability of the approach, the pCHM tree height estimates benchmarking only relied on public forest inventory (FI) information and the photogrammetric protocol was based on low-cost and widely used photogrammetric software. Moreover, our study investigates the relationship between the pCHM tree height estimates based on the neighboring forest parameter provided by the FI program.Our results highlight the good agreement of tree height estimates provided by pCHM using DAP with both field measured and ALS tree height data. In terms of tree height modeling, our pCHM approach reached similar results than the same modeling strategy applied to ALS tree height estimates. Our study also identified some of the drivers of the pCHM tree height estimate error and found forest parameters like tree size (diameter at breast height) and tree type (evergreenness/deciduousness) as well as the terrain topography (slope) to be of higher importance than image survey parameters like the variation of the overlap or the sunlight condition in our dataset. In combination with the pCHM tree height estimate, the terrain slope, the Diameter at Breast Height (DBH) and the evergreenness factor were used to fit a multivariate model predicting the field measured tree height. This model presented better performance than the model linking the pCHM estimates to the field tree height estimates in terms of r² (0.90 VS 0.87) and root mean square error (RMSE, 1.78 VS 2.01 m). Such aspects are poorly addressed in literature and further research should focus on how pCHM approaches could integrate them to improve forest characterization using DAP and pCHM. Our promising results can be used to encourage the use of regional aerial orthophoto surveys archive to produce large scale quality tree height data at very low additional costs, notably in the context of updating national forest inventory programs. 相似文献
13.
谭金石 《测绘与空间地理信息》2015,(6):81-83
机载LiDAR作为一种新兴的对地观测技术,能够快速地获取地表三维信息。如何从海量LiDAR点云数据中提取建筑物是数据处理中的一项关键工作。本文结合LiDAR数据和航空影像的数据特点,提出了一种航空影像辅助的LiDAR点云建筑物提取方法,首先,采用面向对象方法从航空影像中提取建筑物的轮廓;然后,以建筑轮廓信息为参考,从LiDAR点云中提取建筑物的点云数据;最后,通过实验证明该方法的有效性与可行性。 相似文献
14.
用地基激光雷达提取单木结构参数——以白皮松为例 总被引：6，自引：1，他引：5
以白皮松(Pinus bungeana Zucc)为研究对象,针对地基激光雷达TLS扫描的3维点云数据在单株木垂直方向的分布特征,提出了一种基于体元化方法的树干覆盖度变化检测方法,获取单木枝下高;然后根据获取的枝下高引入2维凸包算法获取垂直方向分层树冠轮廓,并计算树冠体积和冠幅;同时获取的单木参数还有胸径与树高。结果表明:单木枝下高的估测精度较高,R2与RMSE分别为0.97 m和0.21 m;胸径估测结果的R2与RMSE分别为0.79 cm和1.07 cm;采用逐步线性回归方法建立单木树冠体积与其他单木参数的相关关系,模型变量包括冠幅、叶子填充树冠长度和胸径,样本数为20,模型的R2与RMSE分别是0.967 m3和2.64 m3。本文方法能较准确地估测枝下高,TLS数据具有对树冠结构3维建模的潜力。 相似文献
15.
利用图割算法进行城市密集点云表面模型重建 总被引：2，自引：1，他引：1
利用倾斜影像获得的密集点云来构建表面模型是基于倾斜影像进行三维重建的核心之一。本文针对现行密集点云表面模型重建存在的建模效率低、表面选取不真实等问题，提出了一种基于图割算法的城市密集点云表面模型重建方法。利用该方法重建城市密集点云表面模型，首先通过预处理软件对无人机倾斜影像进行空中三角测量，并利用空中三角测量的解算结果生成密集点云；然后对密集点云添加相应的边，同时对三维点云根据距离进行选取合并；最后根据三维点云形成的四面体和三角面建立图割问题，并通过求解图割问题来求取最优的密集点云表面模型。为证明这种方法的可行性和有效性，使用城市地区的无人机倾斜影像数据进行城市密集点云表面模型重建，试验结果表明，该方法具有可行性好、建模效果好、处理速度快等优势。 相似文献
16.
Volkan Yilmaz Berkant Konakoglu Cigdem Serifoglu Oguz Gungor Ertan Gökalp 《国际地球制图》2018,33(3):310-320
With the advent of unmanned aerial vehicles (UAVs) for mapping applications, it is possible to generate 3D dense point clouds using stereo images. This technology, however, has some disadvantages when compared to Light Detection and Ranging (LiDAR) system. Unlike LiDAR, digital cameras mounted on UAVs are incapable of viewing beneath the canopy, which leads to sparse points on the bare earth surface. In such cases, it is more challenging to remove points belonging to above-ground objects using ground filtering algorithms generated especially for LiDAR data. To tackle this problem, a methodology employing supervised image classification for filtering 3D point clouds is proposed in this study. A classified image is overlapped with the point cloud to determine the ground points to be used for digital elevation model (DEM) generation. Quantitative evaluation results showed that filtering the point cloud with this methodology has a good potential for high-resolution DEM generation. 相似文献
17.
The airborne lidar system (ALS) provides a means to efficiently monitor the status of remote tropical forests and continues to be the subject of intense evaluation. However, the cost of ALS acquisition can vary significantly depending on the acquisition parameters, particularly the return density (i.e., spatial resolution) of the lidar point cloud. This study assessed the effect of lidar return density on the accuracy of lidar metrics and regression models for estimating aboveground biomass (AGB) and basal area (BA) in tropical peat swamp forests (PSF) in Kalimantan, Indonesia. A large dataset of ALS covering an area of 123,000 ha was used in this study. This study found that cumulative return proportion (CRP) variables represent a better accumulation of AGB over tree heights than height-related variables. The CRP variables in power models explained 80.9% and 90.9% of the BA and AGB variations, respectively. Further, it was found that low-density (and low-cost) lidar should be considered as a feasible option for assessing AGB and BA in vast areas of flat, lowland PSF. The performance of the models generated using reduced return densities as low as 1/9 returns per m2 also yielded strong agreement with the original high-density data. The use model-based statistical inferences enabled relatively precise estimates of the mean AGB at the landscape scale to be obtained with a fairly low-density of 1/4 returns per m2, with less than 10% standard error (SE). Further, even when very low-density lidar data was used (i.e., 1/49 returns per m2) the bias of the mean AGB estimates were still less than 10% with a SE of approximately 15%. This study also investigated the influence of different DTM resolutions for normalizing the elevation during the generation of forest-related lidar metrics using various return densities point cloud. We found that the high-resolution digital terrain model (DTM) had little effect on the accuracy of lidar metrics calculation in PSF. The accuracy of low-density lidar metrics in PSF was more influenced by the density of aboveground returns, rather than the last return. This is due to the flat topography of the study area. The results of this study will be valuable for future economical and feasible assessments of forest metrics over large areas of tropical peat swamp ecosystems. 相似文献
18.
Accurate forest biomass mapping methods would provide the means for e.g. detecting bioenergy potential, biofuel and forest-bound carbon. The demand for practical biomass mapping methods at all forest levels is growing worldwide, and viable options are being developed. Airborne laser scanning (ALS) is a promising forest biomass mapping technique, due to its capability of measuring the three-dimensional forest vegetation structure. The objective of the study was to develop new methods for tree-level biomass estimation using metrics derived from ALS point clouds and to compare the results with field references collected using destructive sampling and with existing biomass models. The study area was located in Evo, southern Finland. ALS data was collected in 2009 with pulse density equalling approximately 10 pulses/m2. Linear models were developed for the following tree biomass components: total, stem wood, living branch and total canopy biomass. ALS-derived geometric and statistical point metrics were used as explanatory variables when creating the models. The total and stem biomass root mean square error per cents equalled 26.3% and 28.4% for Scots pine (Pinus sylvestris L.), and 36.8% and 27.6% for Norway spruce (Picea abies (L.) H. Karst.), respectively. The results showed that higher estimation accuracy for all biomass components can be achieved with models created in this study compared to existing allometric biomass models when ALS-derived height and diameter were used as input parameters. Best results were achieved when adding field-measured diameter and height as inputs in the existing biomass models. The only exceptions to this were the canopy and living branch biomass estimations for spruce. The achieved results are encouraging for the use of ALS-derived metrics in biomass mapping and for further development of the models. 相似文献
19.
Extracting high-quality building footprints is a basic requirement in multiple sectors of town planning, disaster management, 3D visualization, etc. In the current study, we compare three different techniques for acquiring building footprints using (i) LiDAR, (ii) object-oriented classification (OOC) applied on high-resolution aerial photographs and (iii) digital surface models generated from interpolated LiDAR point cloud data. The three outputs were compared with a digitized sample of building polygons quantitatively by computing the errors of commission and omission, and qualitatively using statistical operations. These findings showed that building footprints derived from OOC gave highest regression and correlation values with least commission error. The R2 and R values (0.86 and 0.92, respectively) imply that the footprint areas derived by OOC matched more closely with the actual area of buildings, while a low commission error of 24.7% represented a higher number of footprints as correctly classified. 相似文献
20.
This paper introduces PTrees, a multi-scale dynamic point cloud segmentation dedicated to forest tree extraction from lidar point clouds. The method process the point data using the raw elevation values (Z) and compute height (H = Z − ground elevation) during post-processing using an innovative procedure allowing to preserve the geometry of crown points. Multiple segmentations are done at different scales. Segmentation criteria are then applied to dynamically select the best set of apices from the tree segments extracted at the various scales. The selected set of apices is then used to generate a final segmentation. PTrees has been tested in 3 different forest types, allowing to detect 82% of the trees with under 10% of false detection rate. Future development will integrate crown profile estimation during the segmentation process in order to both maximize the detection of suppressed trees and minimize false detections. 相似文献