共查询到20条相似文献，搜索用时 46 毫秒
1.
The middle part of the Central Indian Ridge (MCIR) between 8°S and 18°S is representative of mid-ocean ridges in the Indian Ocean but has not previously been systematically surveyed. Here we present results from the first high-resolution mapping survey over both on- and off-axis sections of the MCIR including multibeam bathymetry, magnetics, hydrocasting, and seabed sampling. The 700-km-long MCIR consists of six first-order segments that are offset by > 30 km along well-developed transform faults. Three of the first-order segments are further divided into seven second-order segments with < 30 km offset along non-transform discontinuities. We have recognized for the first time 11 prominent ocean core complexes (OCCs). These occur at nearly all segment ends, corresponding to an occurrence every 60 km of the surveyed ridge. Seafloor spreading model studies using magnetic reversals show that the MCIR is a slow-spreading ridge with average full opening rates ranging from 33.7 to 45.1 mm/yr, increasing from north to south. The highly curved and intermittent axial ridge geometry, rugged flank fabric, variation in the depth and width of the middle valley, and the frequent occurrences of ocean core complexes and non-transform discontinuities demonstrate that asymmetric accretionary processes are dominant along the ridge. The spreading rate symmetry combined with morphotectonic features, reveal that the MCIR segments developed mainly via tectonic extension with little magmatism. Segments with asymmetric accretion controlled by tectonic extension makes up ~ 96% of the MCIR, whereas symmetric accretion controlled by robust magmatism make up < 4%. Hydrothermal plumes with high methane concentrations occur frequently over the OCCs. This finding indicates that abundant OCCs exposed by detachment faults lead to extensive hydrothermal circulation at off-axis areas and that detachment faults are the primary fluid path for hydrothermal fluid circulation at off-axis regions. Serpentinization of mantle-derived rock at OCCs may be one of the major sources of heat and methane in off-axis areas. 相似文献
2.
The Perth Abyssal Plain (PAP), located offshore southwest Australia, formed at the centre of Mesozoic East Gondwana breakup and Kerguelen plume activity. Despite its importance as a direct and relatively undisturbed recorder of this early spreading history, sparse geophysical data sets and lack of geological sampling hamper our understanding of the evolution of the PAP. This study combines new bathymetric profiles across the PAP with petrographic and geochemical data from the first samples ever to be dredged from the flanks of the Dirck Hartog Ridge (DHR), a prominent linear bathymetric feature in the central PAP, to better constrain the formation of the early Indian Ocean floor and the influence of the Kerguelen plume. Seafloor spreading in the PAP initiated at ~ 136 Ma with spreading observed to occur at (half) rates of ~ 35 mm/yr. Changes in spreading rate are difficult to discern after the onset of the Cretaceous Quiet Zone at ~ 120 Ma, but an increase in seafloor roughness towards the centre of the PAP likely resulted from a half-spreading rate decrease from 35 mm/yr (based on magnetic reversals) to ~ 24 mm/yr at ~ 114 Ma. Exhumed gabbro dredged from the southernmost dredge site of the DHR supports a further slowdown of spreading immediately prior to full cessation at ~ 102 Ma. The DHR exhibits a high relief ridge axis and distinctive asymmetry that is unusual compared to most active or extinct spreading centres. The composition of mafic volcanic samples varies along the DHR, from sub-alkaline dolerites with incompatible element concentrations most similar to depleted-to-normal mid-ocean ridge basalts in the south, to alkali basalts similar to ocean island basalts in the north. Therefore, magma sources and degrees of partial melting varied in space and time. It is likely that the alkali basalts are a manifestation of later excess volcanism, subsequent to or during the cessation of spreading. In this case, enriched signatures may be attributed tectonic drivers and melting of a heterogeneous mantle, or to an episodic influence of the Kerguelen plume over distances greater than 1000 km. We also investigate possible scenarios to explain how lower crustal rocks were emplaced at the crest of the southern DHR. Our results demonstrate the significance of regional tectonic plate motions on the formation and deformation of young ocean crust, and provide insight into the unique DHR morphology. 相似文献
3.
The Longmu–Gozha Co left-lateral strike-slip fault system (LGCF) is located in remote western Tibet, forming a triple junction with both the Altyn Tagh fault (ATF) and the Karakorum fault (KF), the two major strike-slip faults in the region. The Ashikule, Gozha Co and Longmu Co faults are clear and distinct left-stepping en-echelon faults, together forming the LGCF system. Although poorly documented, quantifying its activity remains a key problem to understand the kinematics and the tectonic history of the westernmost Tibetan Plateau. Indeed, the Karakax fault (NW segment of the ATF), LGCF and KF together control the tectonics of western Tibet which itself controls the extrusion of Tibet towards the east, with the LGCF acting as a natural boundary for eastward motion of the Tibetan Plateau due to India's northward impingement. The LGCF system shows clear and impressive morphological indications of left-lateral active shear, that we quantify using field measurements (terrestrial LIDAR) along with 10Be surface-exposure dating. Our data suggest a slip-rate < 3 mm/yr, consistent with geodetic and block model studies. While it is on the order of the Karakax fault slip-rate (~ 2 mm/yr), it is smaller than those along the ATF and KF (> 9 and > 8 mm/yr, respectively), yielding a few mm/yr of extension accommodated most likely in the Ashikule graben and surroundings, located between the ATF and Karakax faults. Numerous evidences of recent tectonic-related events are present in the vicinity, such as the 1951 volcanic eruption as well as the 2008 and 2014 Ms 7.3 Yutian earthquakes, attesting of its high activity. In addition, the LGCF's en-echelon geometry and identical direction with the ATF, as well as smaller geological offsets and lower slip-rate compared to those on the surrounding faults, suggest that this segment of the ATF may be the most recent. 相似文献
4.
We have used geodetic techniques to improve constraints on the crustal motion of the Pamir Plateau. Three campaigns of Global Position System data acquisition between 2011 and 2015 demonstrate that, in association with the India–Asia collision, a complex pattern of crustal motion exists in the Pamir Plateau. In a north–south direction from the Indian Plate to the Hazak Block, the crust has absorbed ~ 35 mm/yr of shortening, of which ~ 35% is distributed around the Hindu Kush region (~ 12 mm/yr), and another ~ 35% is taken up around the Alai Valley (also ~ 12 mm/yr). Global Position System measurements also show ~ 5 mm/yr of shortening between the Pamir Plateau and the Tajik Basin, whereas between the Pamir and the Tarim Basin, an ~ 10 mm/yr extension rate is observed. With respect to the stable Eurasian Plate, the Pamir rotates counterclockwise at a rate of ~ 1.822°Myr− 1, with an Euler pole positioned about the west end of the Tajik Basin (37.03 ± 0.74°N, 65.89 ± 0.12°E). The strain rate field calculated from Global Position System velocities reveals that the crustal motion is consistent with localized deformation around the Hindu Kush and the Alai Valley, the latter representing a zone with strong shallow seismic activity. 相似文献
5.
《Journal of Asian Earth Sciences》2007,29(2-3):253-265
The E-W to WNW-ESE striking Kunlun Fault Zone, extending about 1600 km, is one of the large strike-slip faults in the northern Tibet, China. As a major strike-slip fault, it plays an important role on the extrusion of Tibet Plateau in accommodating northeastward shortening caused by the India-Asia convergence. However, the time of initiation left-lateral faulting of the Kunlun Fault Zone is still largely debated, ranging from the Middle to Late Triassic (240–200 Ma) to early Quaternary (2 Ma). We document displaced basement rocks and geomorphic features along the Kunlun Fault Zone, based on tectono-geomorphic interpretation of satellite remote sensing images and field geologic and geomorphic observations. Our results show that the largest cumulative offset of basement rocks is likely to be 100 ± 20 km. Meanwhile, a series of pull-apart basins (Kusai, Xiugou and Tuosu lake basins) and pressure ridges (East Deshuiwai and Maji Snow Mountains), each 45–70 km long and ∼8–12 km wide, are developed along the Kunlun Fault Zone, which resulted from long-term tectono-geomorphic growth since the Late Miocene or Early Pliocene. Geologic evidence indicates that the Kunlun Fault Zone had a long-term slip rate of ca.10 mm/yr during the late Quaternary. This slip rate is similar to that shown by present-day GPS measurements. Thus, we estimate that the Kunlun Fault Zone probably began left-lateral faulting at 10 ± 2 Ma based on a total displacement of 100 ± 20 km, and assuming a constant long-term slip rate of ca.10 mm/yr for several millions of years. And this timing constraint on initiation of left-lateral faulting of the Kunlun Fault Zone is consistent with widespread tectonic deformation which occurred in the Tibetan Plateau. 相似文献
6.
《Comptes Rendus Geoscience》2015,347(4):161-169
The Dead Sea Fault is a major strike-slip fault bounding the Arabia plate and the Sinai subplate. On the basis of three GPS campaign measurements, 12 years apart, at 19 sites distributed in Israel and Jordan, complemented by Israeli permanent stations, we compute the present-day deformation across the Wadi Arava fault, the southern segment of the Dead Sea Fault. Elastic locked-fault modelling of fault-parallel velocities provides a slip rate of 4.7 ± 0.7 mm/yr and a locking depth of 11.6 ± 5.3 km in its central part. Along its northern part, south of the Dead Sea, the simple model proposed for the central profile does not fit the velocity field well. To fit the data, two faults have to be taken into account, on both sides of the sedimentary basin of the Dead Sea, each fault accommodating ∼ 2 mm/yr. Locking depths are small (less than 2 km on the western branch, ∼ 6 km on the eastern branch). Along the southern profile, we are once again unable to fit the data using the simple model, similar to the central profile. It is very difficult to propose a velocity greater than 4 mm/yr, i.e. smaller than that along the central profile. This leads us to propose that a part of the relative movement from Sinai to Arabia is accommodated along faults located west of our profiles. 相似文献
7.
Subduction of active spreading ridges most likely occurs throughout Earth's history. Interaction or collision between spreading center and trench, with the active spreading ridge downgoing and shallowly being buried in subduction zone, results in low-pressure but high-temperature near-trench magmatism in the forearc and accretionary prism setting. The Central Asian region, a complex orogenic belt created during the evolution and closure of the Paleo-Asian Ocean (PAO) at ~ 1000–300 Ma, provides an ideal place to study the subduction of PAO spreading ridges beneath ancient continental margins. It had been suggested that the low-pressure and high-temperature mafic and intermediate to felsic magmas from the Karamaili ophiolite (KO) in the NE corner of the Junggar basin (NW China) in Central Asia were likely produced by ridge subduction (Liu et al., 2007). In this paper, we combine our new geochemical data with previous results to show that the geochemical characteristics of the bulk of KO mafic rocks range from arc basalt-like to mid-ocean ridge basalt-like and ocean island basalt-like. Their trace element patterns range from depleted to enriched in highly incompatible elements, but depleted in Nb and Ta, indicating a subduction-influenced origin. The KO intermediate to felsic rocks are calc-alkaline and boninitic in composition and have trace element signatures similar to the associated mafic rocks. The low Nb/Ta ratios of some of the mafic rocks and boninitic character of some of the intermediate to felsic rocks reflect a highly depleted source, perhaps due to prior backarc magmatism. Major and trace element models indicate complex fractional crystallization histories of parental KO magmas to generate both the mafic and intermediate to felsic rocks, but in general, crystal fractionation occurred at 1000 to 1200 °C and moderate to low (0.5 kbar to 10 kbar) pressure or < 23 km depth. We conclude that the KO was formed in a forearc region of a subduction system that experienced ridge subduction. 相似文献
8.
Studies of sulfur and lead isotopic compositions in hydrothermal deposits are an important tool to determine the source and processes of both sulfur and lead, and to understand the origin of hydrothermal ore deposits. Here, the sulfur and lead isotopic compositions of sulfide minerals have been studied for different hydrothermal fields in the East Pacific Rise (EPR), Mid-Atlantic Ridge (MAR), Central Indian Ridge (CIR), Southwest Indian Ridge (SWIR), and North Fiji Basin (NFB). The sulfur isotopic compositions of the studied sulfide samples are variable (δ34S 0.0 to 9.6‰, avg. δ34S 4.7‰; n = 60), being close to the associated igneous rocks (~ 0‰ for, e.g., basalt, serpentinized peridotite), which may reflect the S in the sulfide samples is derived mainly from the associated igneous rocks, and a relatively small proportion (< 36%) of seawater sulfur incorporated into these sulfides during mixing between seawater (δ34S 21‰) and hydrothermal fluid. In contrast for a mixed origin for the source of S, the majority of the lead isotopic compositions (206Pb/204Pb 17.541 ± 0.004 to 19.268 ± 0.001, 207Pb/204Pb 15.451 ± 0.001 to 15.684 ± 0.001, 208Pb/204Pb 37.557 ± 0.008 to 38.988 ± 0.002, n = 21) of the sulfides possess a basaltic Pb isotopic composition, suggesting that the lead in the massive sulfide is mainly leached from local basaltic rocks that host the sub-seafloor hydrothermal systems in sediment-free mid-ocean ridges and mature back-arc basins. Furthermore, sulfide minerals in the super-fast and fast spreading mid-ocean ridges (MORs) exhibit less spread in their the δ34S values compared to sulfides from super-slow, and slow spreading MORs, which is most easily explained as a lesser degree of fluid-rock interaction and hydrothermal fluid-seawater mixing during hydrothermal ore-forming process. Additionally, the S and Pb isotope compositions of sulfides are controlled by the fluid processes for forming seafloor massive sulfide deposits. We demonstrate that the variable sulfur and lead isotopic compositions exhibit a relationship with the sulfur and lead sources, fluid–rock interaction, and fluid–seawater mixing. 相似文献
9.
《Quaternary Science Reviews》1999,18(8-9):1021-1038
Time-series O isotope profiles for three U–Th dated stalagmites have revealed that for much of the Holocene, a site on the Atlantic seaboard (SW Ireland) exhibits first-order δ18O trends that are almost exactly out of phase with coupled δ18O curves from two southern European sites (SE France and NW Italy). In the Irish stalagmite (CC3 from Crag Cave, SW Ireland), low δ18O at 10,000 cal yr BP reflects cool conditions. By the early to mid-Holocene (9000–6000 cal yr BP) δ18O had increased, reflecting the onset of warmer conditions on the Atlantic seaboard. This shift to higher δ18O was accompanied by a marked increase in the stalagmite extension rate, reinforcing our interpretation that this was a period of relative warmth. Except for an episode of increased extension rate about 5500 yr ago, δ18O in the Crag stalagmite exhibits a gradual decrease, accompanied by declining extension rates between 7800 and 3500 cal yr BP, interpreted as a cooling trend. There is evidence for increases in both δ18O and stalagmite extension rate in the period from 3500 cal yr BP to the present day suggesting a return to warmer conditions on the Atlantic seaboard. In the stalagmite from NW Italy (ER76, Grotta di Ernesto, Trentino province) the early-Holocene (c. 9200-7800 cal yr BP) is characterised by high δ18O, probably indicative of warm and/or dry conditions. Exceptionally low δ18O from 7800 to 6900 cal yr BP at this site reflects a well-defined wet phase (Cerin wet phase). In the last three millennia, this stalagmite exhibits a shift to lower δ18O, interpreted as some combination of cooler and/or wetter conditions. Unlike the Irish stalagmite, the Italian sample does not show a correlation between δ18O and extension rate. Instead, its extension rate correlates roughly with δ13C, presumably reflecting a climate-driven vegetation change. In the early Holocene, δ18O in the French stalagmite (CL26, Grotte de Clamouse, Herault province, SE France) was low relative to its Holocene average. For much of the period since c. 3500 cal yr BP this stalagmite exhibits higher δ18O than in the early Holocene, suggesting warmer conditions. Like the Irish stalagmite, the French sample exhibits a well-defined correlation between δ18O and extension rate. Had drip-water availability been the dominant control on δ18O at this semi-arid site then higher δ18O would have been accompanied by lower, not higher extension rates. This suggests strongly that temperature rather than rainfall amount was the dominant control at this site. While conclusions regarding the patterns of climate variability on a continent scale must remain tentative because of the limited number of stalagmites studied we argue that early Holocene warm conditions on the Atlantic seaboard (Irish site) coincided with relatively cool conditions at the Clamouse site. By c. 3500 yr ago the pattern appears to have been reversed. 相似文献
10.
Enumerating active hydrothermal fields on the seafloor has been a challenge since their discovery almost 40 years ago. High-temperature hydrothermal fields are readily discoverable, primarily by detecting mineral-laden plumes, but low-temperature, particle-poor vent fields resist discovery. Decades of exploration for vent fields have covered, though often cursorily, about one-third of the global lengths of both oceanic spreading ridges (OSRs) and volcanic arcs, identifying some 630 active vent fields. About 80% of these fields are on OSRs, and the spatial frequency of those fields is currently estimated as ∼0.5–5/100 km, generally increasing with spreading rate. Over the last decade, however, a few detailed surveys have added sensors capable of detecting ephemeral chemical tracers (oxidation-reduction potential) in addition to standard sensors that detect quasi-conservative optical tracers (such as light backscattering). This approach has revealed a new view of the distribution of venting fields along fast-spreading (>55 mm/yr) OSRs. Studies of four such ridge sections totaling 1470 km length suggest that the present inventory of vent fields may underestimate the true global population of vent fields on fast-spreading OSRs by a factor of 3–6. This increase implies that ridge axes are unexpectedly “leaky” reservoirs, from which hydrothermal fluids escape at far more sites than presently assumed; that the supply of dissolved hydrothermal iron, which may be fertilizing the primary production of the Southern Ocean, is higher than now calculated; and that present estimates of recoverable sulfide tonnage from ridge axes may be too low. Along slow-spreading ridges, which account for 60% of the global OSR length and 86% of known sulfide tonnage, expansive axial valleys present special exploration challenges that will not be easily overcome. 相似文献
11.
《Journal of Structural Geology》2001,23(2-3):531-543
Palaeoseismological and morphotectonic analyses enable us to define a 400-m-wide actively deformed zone associated with the active Eliki normal fault, central Greece, bounded on the south by a second-order fault and on the north by a composite and prominent fault scarp. This scarp is further analysed by trenching. Based on colluvium stratigraphy, displacement of distinct horizons and deposition of sedimentary layers, three faulting events have been identified along four fault strands affecting unconsolidated sediments in the trench. The two younger events, with throws of 0.93 and 1.37 m, respectively, the third event, with a throw of 0.44 m, and the penultimate 373 BC event suggest a variable seismic history.The entire alluvial plain of the Kerynitis and Vouraikos rivers, which cross the Eliki fault, has subsided at a rate of 1.4 mm/year, resulting in the burial of the Late Hellenistic–Roman occupation horizons under 3 m of fluvial and colluvial sediments in places.Extension in the broader area is accommodated by the seismically active Eliki and Egion faults. Structural and palaeoseismological analysis of those two faults indicates that they accommodate 1.5 mm/year, or about 10% of the geodetically estimated extension of up to 13 mm/year. 相似文献
12.
J. Bockheim A. Coronato J. Rabassa B. Ercolano J. Ponce 《Quaternary Science Reviews》2009,28(13-14):1188-1199
Relict sand wedges are ubiquitous in southern Patagonia. At six sites we conducted detailed investigations of stratigraphy, soils, and wedge frequency and characteristics. Some sections contain four or more buried horizons with casts. The cryogenic features are dominantly relict sand wedges with an average depth, maximum apparent width, minimum apparent width, and H/W of 78, 39, 3.8, and 2.9 cm, respectively. The host materials are fine-textured (silt loam, silty clay loam, clay loam) till and the infillings are aeolian sand. The soils are primarily Calciargidic Argixerolls that bear a legacy of climate change. Whereas the sand wedges formed during very cold (?4 to ?8 °C or colder) and dry (ca. ≤100 mm precipitation/yr) glacial periods, petrocalcic horizons from calcium carbonate contributed by dustfall formed during warmer (7 °C or warmer) and moister (≥250 mm/yr) interglacial periods. The paleo-argillic (Bt) horizons reflect unusually moist interglacial events where the mean annual precipitation may have been 400 mm/yr. Permafrost was nearly continuous in southern Patagonia during the Illinoian glacial stage (ca. 200 ka), the early to mid-Pleistocene (ca. 800–500 ka), and on two occasions during the early Pleistocene (ca. 1.0–1.1 Ma). 相似文献
13.
The internal architecture of raised beach ridge and associated swale deposits on Anholt records an ancient sea level. The Holocene beach ridges form part of a progradational beach ridge plain, which has been interpreted to have formed during an isostatic uplift and a relative fall in the sea level over the past 7700 years. The ridges are covered by pebbles and cobbles and commonly show evidence of deflation. Material presumably removed from the beach ridges and adjacent swales form the present dune forms on Anholt. Ground-penetrating radar (GPR) reflection lines have been collected with 250 MHz shielded antennae across the fossil ridge and swale structures. The signals penetrate the subsurface to a maximum depth of ～ 10 m below the fossil features. The GPR data resolve the internal architecture of the beach ridges and swales with a vertical resolution of about 0.1 m. GPR mapping indicates that the Holocene beach ridges are composed of seaward-dipping beachface deposits as well as minor amounts of inland dipping deposits of wash-over origin. The beachface deposits downlap on underlying shoreface deposits, and we use these surfaces as markers of a relative palaeo-sea level. The new data indicate that the highest relative sea level at about 8.5 m was reached 6500 years ago; 700 years later the relative sea level had dropped 0.7 m indicating a change in the relative sea level around 1 mm/year. This fall in the relative sea level most likely records the influence of an isostatic rebound causing younger beach ridge deposits to indicate lower sea levels. 相似文献
14.
The Aegean region including western Turkey, mainland Greece, and the Hellenic Arc is the most seismological and geodynamical active domain in the Alpine Himalayan Belt. In this study, we processed 3 years of survey-mode GPS data and present the analysis of a combination of geodetic and seismological data around Izmir, which is the third most populated city in Turkey. The velocities obtained from 15 sites vary between 25 mm/yr and 28 mm/yr relative to the Eurasian plate. The power law exponent of earthquake size distribution (b-value) ranges from 0.8 to 2.8 in the Izmir region between 26.2°E and 27.2°E. The lowest b-value zones are found along Karaburun Fault (b = 0.8) and, between Seferihisar and Tuzla Faults (b = 0.8). A localized stress concentration is expected from numerical models of seismicity along geometrical locked fault patches. Therefore, areas with lowest b-values are considered to be the most likely location for a strong earthquake, a prediction that is confirmed by the 2005 Mw = 5.9 Seferihisar earthquake sequences, with epicentres located to the south of the Karaburun Fault. The north–south extension of the Izmir area is corroborated by extension rates up to 140 nanostrain/yr as obtained from our GPS data. We combined the 3-year GPS velocity field with the published velocity field to determine the strain rate pattern in the area. The spatial distribution of b-value reflects the normal background due to the tectonic framework and is corroborated by the geodetic data. b-Values correlate with strain pattern. This relationship suggests that decrease of b-values signifies accumulating strain. 相似文献
15.
Mammoth (Mammuthus sp.) teeth are relatively abundant in Quaternary deposits from Eurasia and North America, and their isotopic compositions can be used to reconstruct past seasonal patterns in precipitation, diet, and migration. Strategies for collecting and interpreting such data, however, are strongly dependent on growth rates, which can vary among species, individuals, and within teeth. In this study, we use histological and isotopic measurements to determine enamel growth rates for a Columbian mammoth (Mammuthus columbi) tooth in two directions. Using histology, the growth rate through the enamel thickness (ET; perpendicular to the height of the tooth) is estimated at 0.8 to 1.5 mm/yr. Isotopic sampling through the innermost 0.36 mm of the ET recovered less than half a period of variation (i.e., half an inferred year of growth), which is consistent with the histological estimate for ET growth rate. A combination of histological and isotopic measurements suggests that the enamel extension rate (growth in the height of the tooth) is 13–14 mm/yr. Knowledge of enamel growth rates should improve the design and interpretation of future isotopic studies of mammoth teeth. The combination of histological and isotopic measurements may also prove useful in determining growth rates for other extinct taxa. 相似文献
16.
The Hengshan massif is an exhumed, mid-crustal, plutonic–metamorphic dome formed during Cretaceous crustal extension in the Jiangnan orogenic belt, central South China. Multiple thermochronometers (mica 40Ar/39Ar, apatite fission track and zircon (U–Th)/He) are applied to its footwall along a slip-parallel transect to quantify its thermal history and cooling rate, and the slip magnitude, rate, initial geometry and kinematic evolution of the low-angle Hengshan detachment fault. Our thermochronological data, in conjunction with previous ages, indicate that (1) footwall rocks cooled from ~ 700 °C to ~ 60 °C in less than 60 Myr (136–80 Ma) at variable rates ranging from ~ 50 °C/Myr to ~ 13 °C/Myr, (2) the Hengshan detachment fault accommodated ~ 8–12 km of total slip at variable slip rates from 0.14 to 1 mm/yr during tectonic exhumation, (3) the footwall has been tilted ~ 26°–50° to the east since slip began, indicating that the low-angle Hengshan detachment fault initiated at a steep dip and was passively rotated to a more gentle orientation during subsequent normal slip. This study provides compelling evidence supporting that the low-angle detachment fault in the extensional dome can be generated by the reactivation and passive rotation of an initially steep reverse fault during normal slip. In addition, our thermochronological data constrain the time of extension in the Hengshan dome between 136 and 80 Ma, which implies that the back-arc extension within South China associated with the rollback of the Paleo-Pacific slab might have lasted until at least 80 Ma. 相似文献
17.
The May 12, 2008, Mw 7.9 Wenchuan earthquake was induced by failure of two of the major faults of the Longmen Shan thrust fault zone along the eastern margin of Tibet Plateau. Our study focused on trenches across the Yingxiu–Bichuan fault, the central fault in the Longmen Shan belt that has a coseismic surface break of more than 200 km long. Trenching excavation across the 2008 earthquake rupture on three representative sites reveals the styles and amounts of the deformation and paleoseismicity along the Longmen Shan fault. Styles of coseismic deformation along the 2008 earthquake rupture at these three sites represent three models of deformation along a thrust fault. Two of the three trench exposures reveal one pre-2008 earthquake event, which is coincident with the pre-existing scarps. Based on the observation of exposed stratigraphy and structures in the trenches and the geomorphic expressions on ground surface, we interpret the 2008 earthquake as a characteristic earthquake along this fault. The interval of reoccurrence of large earthquake events on the Central Longmen Shan fault (the Yingxiu–Beichuan fault) can be inferred to be about 11,000 years according to 14C and OSL dating. The amounts of the vertical displacement and shortening across the surface rupture during the 2008 earthquake are determined to be 1.0–2.8 m and 0.15–1.32 m, respectively. The shortening rate and uplift rate are then estimated to be 0.09–0.12 mm/yr and 0.18–0.2 mm/yr, respectively. It is indicated that the deformation is absorbed mainly not by shortening, but by uplift along the rupture during the 2008 earthquake. 相似文献
18.
Nathan D. Webb David A. Grimley Andrew C. Phillips Bruce W. Fouke 《Quaternary Research》2012,78(2):341-352
The origin of Illinois Episode (OIS 6) glacial ridges (formerly: ‘Ridged Drift’) in the Kaskaskia Basin of southwestern Illinois is controversial despite a century of research. Two studied ridges, containing mostly fluvial sand (OSL ages: ~ 150 ± 19 ka), with associated debris flows and high-angle reverse faults, are interpreted as ice-walled channels. A third studied ridge, containing mostly fine-grained till, is arcuate and morainal. The spatial arrangement of various ridge types can be explained by a glacial sublobe in the Kaskaskia Basin, with mainly fine-grained ridges along the sublobe margins and coarse-grained glaciofluvial ridges in a paleodrainage network within the sublobe interior. Illinois Episode till fabric and striation data demonstrate southwesterly ice flow that may diverge near the sublobe terminus. The sublobe likely formed as glacial ice thinned and receded from its maximum extent. The Kaskaskia Basin contains some of the best-preserved Illinois Episode constructional glacial landforms in the North American midcontinent. Such distinctive features probably result from ice flow and sedimentation into this former lowland, in addition to minimal postglacial erosion. Other similar OIS 6 glacial landforms may exist in association with previously unrecognized sublobes in the midcontinent, where paleo-lowlands might also have focused glacial sedimentation. 相似文献
19.
Natalia Rudaya Pavel Tarasov Nadezhda Dorofeyuk Nadia Solovieva Ivan Kalugin Andrei Andreev Andrei Daryin Bernhard Diekmann Frank Riedel Narantsetseg Tserendash Mayke Wagner 《Quaternary Science Reviews》2009,28(5-6):540-554
This study presents the results of the palynological and diatom analyses of the sediment core recovered in Hoton-Nur Lake (48°37′18″N, 88°20′45″E, 2083 m) in 2004. Quantitative reconstruction of the Holocene vegetation and climate dynamics in the semiarid Mongolian Altai suggests that boreal woodland replaced the primarily open landscape of northwestern Mongolia at about 10 kyr BP (1 kyr = 1000 cal yr) in response to a noticeable increase in precipitation from 200–250 mm/yr to 450–550 mm/yr. A decline of the forest vegetation and a return to a predominance of open vegetation types occurred after 5 kyr BP when precipitation sums decreased to 250–300 mm/yr. Prior to 11.5 kyr BP diatom concentrations are relatively low and the lake is dominated by planktonic Cyclotella and small Fragilariaceae, suggesting the existence of a relatively deep and oligotrophic/mesotrophic lake. The great abundance of Staurosirella pinnata from the beginning of the record until 10.7 kyr BP might imply intensified erosion processes in the catchment and this is fully consistent with the presence of scarce and dry vegetation and the generally arid climate during this period. From about 10.7 kyr BP, more planktonic diatom taxa appeared and increased in abundance, indicating that the lake became more productive as diatom concentration increased. This change correlates well with the development of boreal woodland in the catchment. Decrease in precipitation and changes in the vegetation towards steppe are reflected by the rapid increase in Aulacoseira distans from about 5 kyr BP. The Holocene pollen and diatom records do not indicate soil and vegetation cover disturbances by the anthropogenic activities, implying that the main transformations of the regional vegetation occurred as a result of the natural climate change. Our reconstruction is in agreement with the paleomonsoon records from China, demonstrating an abrupt strengthening of the summer monsoon at 12 kyr BP and an associated increase in precipitation and in lake levels between 11 and 8 kyr BP, followed by the stepwise attenuation of the monsoon circulation and climate aridization towards the modern level. The records from the neighboring areas of Kazakhstan and Russia, situated west and north of Hoton-Nur, demonstrate spatially and temporally different Holocene vegetation and climate histories, indicating that the Altai Mountains as a climate boundary are of pivotal importance for the Holocene environmental and, possibly, habitation history of Central Asia. 相似文献
20.
Carolina bays are nearly ubiquitous along ~ 1300 km of the North American Atlantic Coastal Plain, but relatively few bays have been examined in detail, making their formation and evolution a topic of controversy. The Lake Mattamuskeet basin, eastern North Carolina, USA, is a conglomeration of multiple Carolina bays that form a > 162 km2 lake. The eastern shoreline of the lake is made up of a 2.9-km-wide plain of parabolic ridges that recorded rapid shoreface progradation. The lower shoreface deposit contains abundant charcoal beds and laminae dated 6465–6863 cal yr BP, corresponding with initiation of a lacustrine environment in the eastern part of the lake. A core from the western part of the lake sampled a 1541–1633 cal yr BP charcoal bed at the base of the lacustrine unit, indicating formation of this part of the basin postdates the eastern basin. Lake Mattamuskeet has no relationship to the Younger Dryas or a linked impact event because rim accretion significantly postdates 12,000 cal yr BP. The shoreline progradation, and association of charcoal beds with the oldest lake sediment in both main parts of the basin, suggest that fire and subsequent hydrodynamic processes were associated with initial formation of these Carolina bays. 相似文献