共查询到20条相似文献，搜索用时 62 毫秒
1.
Numerical evaluation of the shear stimulation effect in naturally fractured formations 总被引：1，自引：0，他引：1
In shale gas fracking, the stimulated natural fracture system is often critical to the gas production. In this paper, we present the results of state-of-the-art modeling of a detailed parametric evolution of the shear stimulation effect in discrete fracture network (DFN) formations. Two-dimensional computational modeling studies have been used in an attempt towards understanding how naturally fractured reservoirs response in hydraulic fracturing. Simulations were conducted as a function of: (1) the in-situ stress ratio; (2) internal friction angle of DFN; (3) DFN orientation with the stress field; and (4) operational variables such as injection rate. A sensitivity study reveals a number of interesting observations resulting from these parameters on the shear stimulation in natural fracture system. This work strongly links the production technology, geomechanical evaluation and aids in the understanding and optimization of hydraulic fracturing simulations in naturally fractured reservoirs. 相似文献
2.
储层改造是煤层气井提高产能的重要措施,水力压裂是煤层气储层改造的重要方法.为研究煤层气储层压裂过程及其天然裂缝对煤储层压裂时破裂压力的影响,本文以山西沁水盆地南部高煤级煤矿区为研究区,运用有限元数值模拟方法,计算不同地应力条件下、裂缝处于不同位置时煤储层的破裂压力.结果表明:(1)不同类型地应力场对破裂压力的影响不同.对于均匀应力场,破裂压力随着围压的增大而增大,其增幅约为围压的两倍;对于非均匀应力场,当一个水平主应力不变时,破裂压力会随着水平主应力差的增加而减少;(2)如果地应力条件不变,煤储层破裂压力随着天然裂缝与最大水平主应力方向夹角的增加而增加,水平主应力差越大煤储层破裂压力增幅也越大;(3)在有天然裂隙的地层中进行压裂,当天然裂缝的方位不同时压裂裂缝既可能是沿着天然裂缝扩展的裂缝,也可能是压裂过程中产生的新裂缝,因此天然裂缝的方位对破裂压力具有一定的影响. 相似文献
3.
In discrete fracture network (DFN) modeling, fractures are randomly generated and placed in the model domain. The rock matrix is considered impermeable. Small fractures and isolated fractures are often ignored to reduce computational expense. As a result, the rock matrix between fractures could be large and intersections may not be found between a well introduced in the model and the hydraulically connected fracture networks (fracture backbones). To overcome this issue, this study developed a method to conceptualize a well in a three-dimensional (3D) DFN using two orthogonal rectangular fractures oriented along the well's axis. Six parameters were introduced to parameterize the well screen and skin zone, and to control the connectivity between the well and the fracture backbones. The two orthogonal fractures were discretized using a high-resolution mesh to improve the quality of flow and transport simulations around and along the well. The method was successfully implemented within dfnWorks 2.0 (Hyman et al. 2015) to incorporate a well in a 3D DFN and to track particles leaving an injection well and migrating to a pumping well. Verification of the method against MODFLOW/MODPATH found a perfect match in simulated hydraulic head and particle tracking. Using three examples, the study showed that the method ensured the connectivity between wells and fracture backbones, and honored the physical processes of flow and transport along and around wells in DFNs. Recommendations are given for estimating the values of the six introduced well parameters in a real-world case study. 相似文献
4.
Shale gas has been discovered in the Upper Triassic Yanchang Formation, Ordos Basin, China. Due to the weak tectonic activities in which the shale plays, core observations indicate abundant random non-tectonic micro- fractures in the producing shales. The non-tectonic micro-fractures are different from tectonic fractures and are characterized by being irregular, curved, discontinuous, and randomly distributed. The role of micro-fractures in hydraulic fracturing for shale gas development is currently poorly understood yet potentially critical. Two-dimensional computational modeling studies have been used in an initial attempt toward understanding how naturally random fractured reservoirs respond during hydraulic fracturing. The aim of the paper is to investigate the effect of random non-tectonic fractures on hydraulic fracturing. The numerical models with random non-tectonic micro-fractures are built by extracting the fractures of rock blocks after repeated heating and cooling, using a digital image process. Simulations were conducted as a function of: (1) the in-situ stress ratio; (2) internal friction angle of random fractures; (3) cohesion of random fractures; (4) operational variables such as injection rate; and (5) variable injection rate technology. A sensitivity study reveals a number of interesting observations resulting from these parameters on the shear stimulation in a natural fracture system. Three types of fracturing networks were observed from the studied simulations, and the results also show that variable injection rate technology is most promising for producing complex fracturing networks. This work strongly links the production technology and geomechanical evaluation. It can aid in the understanding and optimization of hydraulic fracturing simulations in naturally random fractured reservoirs. 相似文献
5.
D. O'Malley S. Karra R. P. Currier N. Makedonska J. D. Hyman H. S. Viswanathan 《Ground water》2016,54(4):488-497
During hydraulic fracturing millions of gallons of water are typically injected at high pressure into deep shale formations. This water can be housed in fractures, within the shale matrix, and can potentially migrate beyond the shale formation via fractures and/or faults raising environmental concerns. We describe a generic framework for producing estimates of the volume available in fractures and undamaged shale matrix where water injected into a representative shale site could reside during hydraulic fracturing, and apply it to a representative site that incorporates available field data. The amount of water that can be stored in the fractures is estimated by calculating the volume of all the fractures associated with a discrete fracture network (DFN) based on real data and using probability theory to estimate the volume of smaller fractures that are below the lower cutoff for the fracture radius in the DFN. The amount of water stored in the matrix is estimated utilizing two distinct methods—one using a two‐phase model at the pore‐scale and the other using a single‐phase model at the continuum scale. Based on these calculations, it appears that most of the water resides in the matrix with a lesser amount in the fractures. 相似文献
6.
We provide a comparative analysis of the spatio-temporal dynamics of hydraulic fracturing-induced microseismicity resulting from gel and water treatments. We show that the growth of a hydraulic fracture and its corresponding microseismic event cloud can be described by a model which combines geometry- and diffusion-controlled processes. It allows estimation of important parameters of fracture and reservoir from microseismic data, and contributes to a better understanding of related physical processes. We further develop an approach based on this model and apply it to data from hydraulic fracturing experiments in the Cotton Valley tight gas reservoir. The treatments were performed with different parameters such as the type of treatment fluid, the injection flow rate, the total volume of fluid and of proppant. In case of a gel-based fracturing, the spatio-temporal evolution of induced microseismicity shows signatures of fracture volume growth, fracturing fluid loss, as well as diffusion of the injection pressure. In contrast, in a water-based fracturing the volume creation growth and the diffusion controlled growth are not clearly separated from each other in the space-time diagram of the induced event cloud. Still, using the approach presented here, the interpretation of induced seismicity for the gel and the water treatments resulted in similar estimates of geometrical characteristics of the fractures and hydraulic properties of the reservoir. The observed difference in the permeability of the particular hydraulic fractures is probably caused by the different volume of pumped proppant. 相似文献
7.
Xiaorong Luo 《Earth and Planetary Science Letters》2002,201(2):431-446
Natural hydrofracturing caused by overpressure plays an important role in geopressure evolution and hydrocarbon migration in petroliferous basins. Its mechanism is quite well understood in the case of artificial hydraulic fracturing triggered by high-pressure fluid injection in a well. This is not so for natural hydraulic fracturing which is assumed to initiate as micro-cracks with large influence on the permeability of the medium. The mechanism of natural hydraulic cracking, triggered by increasing pore pressure during geological periods, is studied using a fracturing model coupled to the physical processes occurring during basin evolution. In this model, the hydraulic cracking threshold is assumed to lie between the classical failure limit and the beginning of dilatancy. Fluid pressure evolution is calculated iteratively in order to allow dynamic adjustment of permeability so that the fracturing limit is always preserved. The increase of permeability is interpreted on the basis of equivalent fractures. It is found that fracturing is very efficient to keep a stress level at the rock’s hydraulic cracking limit: a fracture permeability one order of magnitude larger than the intrinsic permeability of the rock would be enough. Observations reported from actual basins and model results strongly suggest that natural hydraulic cracking occurs continuously to keep the pressure at the fracturing limit under relaxed stress conditions. 相似文献
8.
Fractures in porous media have been documented extensively. However, they are often omitted from groundwater flow and mass transport models due to a lack of data on fracture hydraulic properties and the computational burden of simulating fractures explicitly in large model domains. We present a MATLAB toolbox, FracKfinder, that automates HydroGeoSphere (HGS), a variably saturated, control volume finite-element model, to simulate an ensemble of discrete fracture network (DFN) flow experiments on a single cubic model mesh containing a stochastically generated fracture network. Because DFN simulations in HGS can simulate flow in both a porous media and a fracture domain, this toolbox computes tensors for both the matrix and fractures of a porous medium. Each model in the ensemble represents a different orientation of the hydraulic gradient, thus minimizing the likelihood that a single hydraulic gradient orientation will dominate the tensor computation. Linear regression on matrices containing the computed three-dimensional hydraulic conductivity (K) values from each rotation of the hydraulic gradient is used to compute the K tensors. This approach shows that the hydraulic behavior of fracture networks can be simulated where fracture hydraulic data are limited. Simulation of a bromide tracer experiment using K tensors computed with FracKfinder in HGS demonstrates good agreement with a previous large-column, laboratory study. The toolbox provides a potential pathway to upscale groundwater flow and mass transport processes in fractured media to larger scales. 相似文献
9.
Appropriate Domain Size for Groundwater Flow Modeling with a Discrete Fracture Network Model 
下载免费PDF全文
下载免费PDF全文 When a discrete fracture network (DFN) is constructed from statistical conceptualization, uncertainty in simulating the hydraulic characteristics of a fracture network can arise due to the domain size. In this study, the appropriate domain size, where less significant uncertainty in the stochastic DFN model is expected, was suggested for the Korea Atomic Energy Research Institute Underground Research Tunnel (KURT) site. The stochastic DFN model for the site was established, and the appropriate domain size was determined with the density of the percolating cluster and the percolation probability using the stochastically generated DFNs for various domain sizes. The applicability of the appropriate domain size to our study site was evaluated by comparing the statistical properties of stochastically generated fractures of varying domain sizes and estimating the uncertainty in the equivalent permeability of the generated DFNs. Our results show that the uncertainty of the stochastic DFN model is acceptable when the modeling domain is larger than the determined appropriate domain size, and the appropriate domain size concept is applicable to our study site. 相似文献
10.
José Sérgio dos Santos Thomas Paul Ballestero Ernesto da Silva Pitombeira 《Ground water》2011,49(3):415-425
A theoretical method is proposed to estimate post‐fracturing fracture size and transmissivity, and as a test of the methodology, data collected from two wells were used for verification. This method can be employed before hydrofracturing in order to obtain estimates of the potential hydraulic benefits of hydraulic fracturing. Five different pumping test analysis methods were used to evaluate the well hydraulic data. The most effective methods were the Papadopulos‐Cooper model (1967), which includes wellbore storage effects, and the Gringarten‐Ramey model (1974), known as the single horizontal fracture model. The hydraulic parameters resulting from fitting these models to the field data revealed that as a result of hydraulic fracturing, the transmissivity increased more than 46 times in one well and increased 285 times in the other well. The model developed by dos Santos (2008) , which considers horizontal radial fracture propagation from the hydraulically fractured well, was used to estimate potential fracture geometry after hydrofracturing. For the two studied wells, their fractures could have propagated to distances of almost 175 m or more and developed maximum apertures of about 2.20 mm and hydraulic apertures close to 0.30 mm. Fracturing at this site appears to have expanded and propagated existing fractures and not created new fractures. Hydraulic apertures calculated from pumping test analyses closely matched the results obtained from the hydraulic fracturing model. As a result of this model, post‐fracturing geometry and resulting post‐fracturing well yield can be estimated before the actual hydrofracturing. 相似文献
11.
We present a case of detailed analysis of fracture arrays spanning four orders of magnitude in length; all of them measured at a single natural site by acquiring images at progressively larger scales. There is a high dispersion of cumulative-length exponents, box dimensions and fracture densities. However, the fractal analysis supports the fractal nature of fracture arrays. Our data indicate the existence of an upper limit for the density parameters, as similarly reported by other authors. We prove that box dimension is in inverse relation with fracture concentration and in direct relation with fracture density. These relations are also observed in our data and additionally there is an upper limit for the box dimensions. We interpret the dispersion in our results as more fundamental than methodological problems. It represents a truncation in the complete evolution of the fracture systems because in natural cases strain initiates overprinting of previous fracture arrays. Considering that larger fractures accommodate strain more efficiently than small fractures, the generation of small fractures is inhibited in the presence of pre-existing larger fractures. Maximum values of fracture density prevent accommodating an excess of strain in a single or restricted range of scales; we claim this condition produces migration of fracturing to larger scales originating fracture scaling. 相似文献
12.
在水力压裂施工中,如何有效获取压裂过程中产生的裂缝形态以及裂缝的动态扩展过程一直是困扰学术界和工业界的问题。目前,常规利用微地震事件定位结果进行分析的方法存在需要人工干预、散点信息表示能力不足等问题;采用数值模拟分析的方法往往因复杂的地下介质情况而引入计算偏差。本文基于非监督学习算法,通过提取微地震事件的空间和时间信息,实现对裂缝平面的识别以及裂缝网络拓展路径的分析;并通过引入水力压裂岩石物理实验,利用实际监测获得的声发射数据以及对应的真实破裂情况的CT扫描数据,检验方法的可行性。最终结果表明,本文所提方法对主断裂有较好的识别效果,识别结果与CT扫描的真实结果吻合性较好。 相似文献
13.
WANG Xiaoqiong XU Jianguo ZHAO Chenxu LIU Tongyuan GE Hongkui SHEN Yinghao WU Shan YU Jiayao HUANG Rongyan 《中国地震研究》2020,34(2):167-186
The premise of hydraulic fracturing is to have an accurate and detailed understanding of the rock mechanical properties and fracture propagation law of shale reservoirs. In this paper, a comprehensive evaluation of the mechanical properties of the shale oil reservoir in the south of Songliao Basin is carried out. Based on the experiments and the in-situ stress analysis, the fracture propagation law of three types of shale reservoirs is obtained, and the suggestions for fracturing are put forward. The results have shown that the fracture propagation of pure shale and low mature reservoir is easy to open along the bedding plane under compression loading, which is greatly influenced by the bedding. Sand-bearing shale is slightly better, the fractures of which are not easy to open along the bedding plane. The mechanical experimental results show that all the samples have the characteristics of low compressive strength, low Young''s modulus and strong anisotropy, indicating that the shale oil reservoir is certain plastic, which is related to its high clay mineral content and controlled by the bedding development. Compared with pure shale and low mature shale, the sand-bearing shale has less clay content and less developed bedding, which maybe the main reason for its slightly better brittleness. Overall, the expansion of hydraulic fracture is controlled by in-situ stress and bedding. Because of the development of bedding, it is easy to form horizontal fractures. Thus it is not suitable for horizontal well fracturing. Because of the high content of clay minerals, the applicability of conventional slick hydraulic fracturing fluid is poor. It is suggested to use vertical well or directional well to carry out volume fracturing. In this way, the effect of bedding can be effectively used to open and connect the bedding and form a larger fracture network. 相似文献
14.
Tom Myers 《Ground water》2012,50(6):872-882
Hydraulic fracturing of deep shale beds to develop natural gas has caused concern regarding the potential for various forms of water pollution. Two potential pathways—advective transport through bulk media and preferential flow through fractures—could allow the transport of contaminants from the fractured shale to aquifers. There is substantial geologic evidence that natural vertical flow drives contaminants, mostly brine, to near the surface from deep evaporite sources. Interpretative modeling shows that advective transport could require up to tens of thousands of years to move contaminants to the surface, but also that fracking the shale could reduce that transport time to tens or hundreds of years. Conductive faults or fracture zones, as found throughout the Marcellus shale region, could reduce the travel time further. Injection of up to 15,000,000 L of fluid into the shale generates high pressure at the well, which decreases with distance from the well and with time after injection as the fluid advects through the shale. The advection displaces native fluids, mostly brine, and fractures the bulk media widening existing fractures. Simulated pressure returns to pre‐injection levels in about 300 d. The overall system requires from 3 to 6 years to reach a new equilibrium reflecting the significant changes caused by fracking the shale, which could allow advective transport to aquifers in less than 10 years. The rapid expansion of hydraulic fracturing requires that monitoring systems be employed to track the movement of contaminants and that gas wells have a reasonable offset from faults. 相似文献
15.
Analysis of borehole flow logs is a valuable technique for identifying the presence of fractures in the subsurface and estimating properties such as fracture connectivity, transmissivity and storativity. However, such estimation requires the development of analytical and/or numerical modeling tools that are well adapted to the complexity of the problem. In this paper, we present a new semi-analytical formulation for cross-borehole flow in fractured media that links transient vertical-flow velocities measured in one or a series of observation wells during hydraulic forcing to the transmissivity and storativity of the fractures intersected by these wells. In comparison with existing models, our approach presents major improvements in terms of computational expense and potential adaptation to a variety of fracture and experimental configurations. After derivation of the formulation, we demonstrate its application in the context of sensitivity analysis for a relatively simple two-fracture synthetic problem, as well as for field-data analysis to investigate fracture connectivity and estimate fracture hydraulic properties. These applications provide important insights regarding (i) the strong sensitivity of fracture property estimates to the overall connectivity of the system; and (ii) the non-uniqueness of the corresponding inverse problem for realistic fracture configurations. 相似文献
16.
水力压裂是页岩气开发过程中的核心增产技术,微地震则广泛用于压裂分析、水驱前缘监测和储层描述.微地震反演过程中,用于反演的速度模型往往基于测井、地震或标定炮资料构建,忽略了压裂过程中裂缝及孔隙流体压力变化对地层速度的影响.本文首先基于物质守恒、渗流理论和断裂力学模拟三维水力压裂过程,得到地下裂缝发育特征和孔隙压力分布.继而根据Coates-Schoenberg方法和裂缝柔量参数计算裂缝和孔隙压力对速度场的影响,得到压裂过程中的实时速度模型.最后利用三维射线追踪方法正演微地震走时和方位信息,并采用常规微地震定位方法反演震源位置及进行误差分析.数值模拟结果表明,检波器空间分布影响定位精度,常规方法的定位误差随射线路径在压裂带中传播距离增加而变大,且不同压裂阶段的多点反演法与单点极化法精度相当. 相似文献
17.
Large sand intrusions often exhibit conical morphologies analogous to magmatic intrusions such as saucer-shaped or cup-shaped sills. Whereas some physical processes may be similar, we show with scaled experiments that the formation of conical sand intrusions may be favoured by the pore-pressure gradients prevailing in the host rock before sand injection. Our experiments involve injecting air into a permeable and cohesive analogue material to produce hydraulic fractures while controlling the pore pressure field. We control the state of overpressure in the overburden by applying homogeneous basal pore pressure, and then adding a second local pore pressure field by injecting air via a central injector to initiate hydraulic fractures near the injection point. In experiments involving small vertical effective stresses (small overburden, or high pore fluid overpressure), the fracturing pressure (λfract) is supralithostatic and two dipping fractures are initiated at the injection point forming a conical structure. From theoretical considerations, we predict that high values of λfract are due to strong cohesion or high pore fluid overpressure distributed in the overburden. Such conditions are favoured by the pore pressure/stress coupling induced by both pore pressure fields. The dips of cones can be accounted for elastic-stress rotation occurring around the source. Contrary to magmatic chamber models, the aqueous fluid overpressure developed in a parent sandbody (and prevailing before the formation of injectites) may diffuse into the surrounding overburden, thus favouring stress rotation and the formation of inclined sheets far from the parent source. For experiments involving higher vertical effective stresses (thick overburden or low pore fluid overpressure), the fracturing pressure is lower than the lithostatic stress, and a single fracture is opened in mode I which then grows vertically. At a critical depth, the fracture separates into two dilatant branches forming a flat cone. We make use of a P.I.V. (Particle Imaging Velocimetry) technique to analyse plastic deformation, showing that these inclined fractures are opened in mixed modes. Close to the surface, they change into steep shear bands where fluids can infiltrate. The final morphology of the fracture network is very similar to the common tripartite architecture of various injection complexes, indicating that different mechanisms may be involved in the formation of dykes. Feeder dykes under the sill zones may open as tensile fractures, while overlying dykes may be guided by the deformation induced by the growth of sills. These deformation conditions may also favour the formation of fluid escape structures and pockmarks. 相似文献
18.
19.
Hydraulic stimulation and geothermal reservoir operation may compromise the rock mechanical stability and trigger microseismic events. The mechanisms leading to this induced seismicity are still not completely understood. It is clear that injection causes an overpressure that reduces the effective stress, bringing the system closer to failure conditions. However, rock instability may not result only from hydraulic effects, but also from thermal effects. In fact, hydro-mechanical (i.e., isothermal) models often fail to reproduce field observations because the injection of cold water into a hot reservoir induces thermal stresses due to rock contraction. Thus, rock instability is likely to result from the superposition of hydraulic and thermal effects. Here, we perform coupled thermo-hydro-mechanical and hydro-mechanical simulations to investigate the effects of cold water injection in a fracture zone-intact rock system. Results show that thermal effects induce a significant perturbation on the stress in the intact rock affected by the temperature drop. This perturbation is likely to trigger induced seismicity in the surroundings of critically oriented fractures near the injection well. Hydro-mechanical simulations show that the behavior depends on the orientation of the faults and on the initial stress tensor. In the direction of the fractures, where the strains are more constrained, total stress increases with increasing pressure; thus, deviatoric stress increases or decreases depending on the initial stress state. The comparison between hydraulic and thermal effects shows that, when the largest confining stress acts perpendicular to the fractures, thermoelastic effects dominate and could trigger induced seismicity. 相似文献
20.
Laboratory hydrofracture experiments were performed on triaxially stressed specimens of oil shale and low-permeability granite. The results show that either shear or tension fractures could develop depending on the level of differentials stress, even in specimens containing preexisting fractures. With 1 kb of confining pressure and differential stress greater than 2kb, hydraulic fluid diffusion into the specimens reduced the effective confining pressure until failure occurred by shear fracture. Below 2kb of differential stress, tension fractures occurred. These results suggest that hydraulic fracturing in regions of significant tectonic stress may produce shear rather than tension fractures. In this casein situ stress determinations based on presumed tension fractures would lead to erroneous results. 相似文献