首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Processing U ores in the JEB Mill of the McClean Lake Operation in northern Saskatchewan produces spent leaching solutions (raffinates) with pH  1.5, and As and Ni concentrations up to 6800 and 5200 mg L−1, respectively. Bench-scale neutralization experiments (pH 2–8) were performed to help optimize the design of mill processes for reducing As and Ni concentrations in tailings and raffinates to 1 mg L−1 prior to their disposal. Precipitate mineralogy determined by chemical analysis, XRD, SEM, EM, XM and EXAFS methods, included gypsum (the dominant precipitate), poorly crystalline scorodite (precipitated esp. from pH 2–4), annabergite, hydrobasaluminite, ferrihydrite, green rust II and theophrastite. The As was mostly in scorodite with smaller amounts in annabergite and trace As adsorbed and/or co-precipitated, probably by ferrihydrite. Geochemical modeling indicated that above pH 2, the ion activity product (IAP) of scorodite lies between the solubility products of amorphous and crystalline phases (log Ksp = −23.0 and −25.83, respectively). The IAP decreases with increasing pH, suggesting that the crystallinity of the scorodite increases with pH. Forward geochemical models support the assumption that during neutralization, particles of added base produce sharp local pH gradients and disequilibrium with bulk solutions, facilitating annabergite and theophrastite precipitation.  相似文献   

2.
《Geochimica et cosmochimica acta》1999,63(19-20):3379-3394
The proposed JEB Tailings Management Facility (TMF) to be emplaced below the groundwater table in northern Saskatchewan, Canada, will contain uranium mill tailings from McClean Lake, Midwest and Cigar Lake ore bodies, which are high in arsenic (up to 10%) and nickel (up to 5%). A serious concern is the possibility that high arsenic and nickel concentrations may be released from the buried tailings, contaminating adjacent groundwaters and a nearby lake. Laboratory tests and geochemical modeling were performed to examine ways to reduce the arsenic and nickel concentrations in TMF porewaters so as to minimize such contamination from tailings buried for 50 years and longer. The tests were designed to mimic conditions in the mill neutralization circuit (3 hr tests at 25°C), and in the TMF after burial (5–49 day aging tests). The aging tests were run at, 50, 25 and 4°C (the temperature in the TMF). In order to optimize the removal of arsenic by adsorption and precipitation, ferric sulfate was added to tailings raffinates1 having Fe/As ratios of less that 3–5. The acid raffinates were then neutralized by addition of slaked lime to nominal pH values of 7, 8, or 9.Analysis and modeling of the test results showed that with slaked lime addition to acid tailings raffinates, relatively amorphous scorodite (ferric arsenate) precipitates near pH 1, and is the dominant form of arsenate in slake limed tailings solids except those high in Ni and As and low in Fe, in which cabrerite-annabergite (Ni, Mg, Fe(II) arsenate) may also precipitate near pH 5–6. In addition to the arsenate precipitates, smaller amounts of arsenate are also adsorbed onto tailings solids.The aging tests showed that after burial of the tailings, arsenic concentrations may increase with time from the breakdown of the arsenate phases (chiefly scorodite). However, the tests indicate that the rate of change decreases and approaches zero after 72 hrs at 25°C, and may equal zero at all times in the TMF at 4°C. Consistent with a kinetic model that describes the rate of breakdown of scorodite to form hydrous ferric oxide, the rate of release of dissolved arsenate to tailings porewaters from slake limed tailings: (1) is proportional to pH above pH 6–7; (2) decreases exponentially as the total molar Fe/As ratio of tailings raffinates is increased from 1/1 to greater than 5/1; and (3) is proportional to temperature with an average Arrhenius activation energy of 13.4 ± 4.2 kcal/mol.Study results suggest that if ferric sulfate and slaked lime are added in the tailings neutralization circuit to give a raffinate Fe/As molar ratio of at least 3–5 and a nominal (initial) pH of 8 (final pH of 7–8), arsenic and nickel concentrations of 2 mg/L or less, are probable in porewaters of individual tailings in the TMF for 50 to 10,000 yrs after tailings disposal. However, the tailings will be mixed in the TMF, which will contain about 35% tailings with Fe/As = 3.0, and 65% tailings with Fe/As = 5.0–7.7. Thus, it seems likely that average arsenic pore water concentrations in the TMF may not exceed 1 mg/L.  相似文献   

3.
Models of geochemical controls on elements of concern (EOCs; e.g., As, Se, Mo, Ni) in U tailings are dominated by ferrihydrite. However, the evolution of aqueous concentrations of Al and Mg through the Key Lake (KL) U mill bulk neutralization process indicates that secondary Al and Mg minerals comprise a large portion of the tailings solids. X-ray diffraction, Al K-edge XAS, and TEM elemental mapping of solid samples collected from a pilot-scale continuous-flow synthetic raffinate neutralization system of the KL mill indicate the secondary Al–Mg minerals present include Mg–Al hydrotalcite, amorphous Al(OH)3, and an amorphous hydrobasaluminite-type phase. The ferrihydrite present contains Al and may be more accurately described as Al–Fe(OH)3. In the final combined tailings sample (pH 10.5) collected from the model experiments using raffinate with Al, Mg, and Fe, solid phase EOCs were associated with Al–Fe(OH)3 and Mg–Al hydrotalcite. In model experiments using raffinate devoid of Fe, aqueous EOC concentrations decreased greatly at pH 4.0 (i.e., where ferrihydrite would precipitate) and largely remained in the solid phase when increased to the terminal pH of 10.5; this suggests Al–Mg minerals can control aqueous concentrations of EOCs in the raffinate in the absence of Fe. Maximum adsorption capacities for individual and mixtures of adsorbates by Mg–Al hydrotalcite were determined. A revised model of the geochemical controls in U mill tailings is presented in which Al and Mg minerals co-exist with Fe minerals to control EOC concentrations.  相似文献   

4.
Published solubility data for amorphous ferric arsenate and scorodite have been reevaluated using the geochemical code PHREEQC with a modified thermodynamic database for the arsenic species. Solubility product calculations have emphasized measurements obtained under conditions of congruent dissolution of ferric arsenate (pH < 3), and have taken into account ion activity coefficients, and ferric hydroxide, ferric sulfate, and ferric arsenate complexes which have association constants of 104.04 (FeH2AsO42+), 109.86 (FeHAsO4+), and 1018.9 (FeAsO4). Derived solubility products of amorphous ferric arsenate and crystalline scorodite (as log Ksp) are −23.0 ± 0.3 and −25.83 ± 0.07, respectively, at 25 °C and 1 bar pressure. In an application of the solubility results, acid raffinate solutions (molar Fe/As = 3.6) from the JEB uranium mill at McClean Lake in northern Saskatchewan were neutralized with lime to pH 2-8. Poorly crystalline scorodite precipitated below pH 3, removing perhaps 98% of the As(V) from solution, with ferric oxyhydroxide (FO) phases precipitated starting between pH 2 and 3. Between pH 2.18 and 7.37, the apparent log Ksp of ferric arsenate decreased from −22.80 to −24.67, while that of FO (as Fe(OH)3) increased from −39.49 to −33.5. Adsorption of As(V) by FO can also explain the decrease in the small amounts of As(V)(aq) that remain in solution above pH 2-3. The same general As(V) behavior is observed in the pore waters of neutralized tailings buried for 5 yr at depths of up to 32 m in the JEB tailings management facility (TMF), where arsenic in the pore water decreases to 1-2 mg/L with increasing age and depth. In the TMF, average apparent log Ksp values for ferric arsenate and ferric hydroxide are −25.74 ± 0.88 and −37.03 ± 0.58, respectively. In the laboratory tests and in the TMF, the increasing crystallinity of scorodite and the amorphous character of the coexisting FO phase increases the stability field of scorodite relative to that of the FO to near-neutral pH values. The kinetic inability of amorphous FO to crystallize probably results from the presence of high concentrations of sulfate and arsenate.  相似文献   

5.
X-ray absorption fine structure (XAFS) is used to characterize the mineralogy of the iron(III)-arsenate(V) precipitates produced during the raffinate (aqueous effluent) neutralization process at the McClean Lake uranium mill in northern Saskatchewan, Canada. To facilitate the structural characterization of the precipitated solids derived from the neutralized raffinate, a set of reference compounds were synthesized and analyzed. The reference compounds include crystalline scorodite, poorly-crystalline scorodite, iron(III)-arsenate co-precipitates obtained under different pH conditions, and arsenate-adsorbed on goethite. The poorly-crystalline scorodite (prepared at pH 4 with Fe/As = 1) has similar As local structure as that of crystalline scorodite. Both As and Fe K-edge XAFS of poorly-crystalline scorodite yield consistent results on As-Fe (or Fe-As) shell. From As K-edge analysis the As-Fe shell has an inter-atomic distance of 3.33 ± 0.02 Å and coordination number of 3.2; while from Fe K-edge analysis the Fe-As distance and coordination number are 3.31 ± 0.02 Å and 3.8, respectively. These are in contrast with the typical arsenate adsorption on bidentate binuclear sites on goethite surfaces, where the As-Fe distance is 3.26 ± 0.03 Å and coordination number is close to 2. A similar local structure identified in the poorly-crystalline scorodite is also found in co-precipitation solids (Fe(III)/As(V) = 3) when precipitated at the same pH (pH = 4): As-Fe distance 3.30 ± 0.03 Å and coordination number 3.9; while at pH = 8 the co-precipitate has As-Fe distance of 3.27 ± 0.03 Å and coordination number about 2, resembling more closely the adsorption case. The As local structure in the two neutralized raffinate solid series (precipitated at pH values up to 7) closely resembles that in the poorly-crystalline scorodite. All of the raffinate solids have the same As-Fe inter-atomic distance as that in the poorly-crystalline scorodite, and a systematic decrease in the As-Fe coordination is observed when pH is progressively increased; the basic poorly-crystalline scorodite structural feature remains in the raffinate solid up to pH 7.  相似文献   

6.
In northern Saskatchewan, Canada, high-grade U ores and the resulting tailings can contain high levels of As. An environmental concern in the U mining industry is the long-term stability of As within tailings management facilities (TMFs) and its potential transfer to the surrounding groundwater. To mitigate this problem, U mill effluents are neutralized with lime to reduce the aqueous concentration of As. This results in the formation of predominantly Fe3+–As5+ secondary mineral phases, which act as solubility controls on the As in the tailings discharged to the TMF. Because the speciation of As in natural systems is critical for determining its long-term environmental fate, characterization of As-bearing mineral phases and complexes within the deposited tailings is required to evaluate its potential transformation, solubility, and long-term stability within the tailings mass. In this study, synchrotron-based bulk X-ray absorption spectroscopy (XAS) was used to study the speciation of As and Fe in mine tailings samples obtained from the Deilmann TMF at Key Lake, Saskatchewan. Comparisons of K-edge X-ray absorption spectra of tailings samples and reference compounds indicate the dominant oxidation states of As and Fe in the mine tailings samples are +5 and +3, respectively, largely reflecting their generation in a highly oxic mill process, deposition in an oxidized environment, and complexation within stable oxic phases. Linear combination fit analyses of the K-edges for the Fe X-ray absorption near edge spectra (XANES) to reference compounds suggest Fe is predominantly present as ferrihydrite with some amount of the primary minerals pyrite (8–15% in some samples) and chalcopyrite (5–15% in some samples). Extended X-ray absorption fine structure (EXAFS) analysis of As K-edge spectra indicates that As5+ (arsenate) present in tailings samples is adsorbed to the ferrihydrite though an inner-sphere bidentate linkage.  相似文献   

7.
《Applied Geochemistry》2003,18(11):1733-1750
The Rabbit Lake U mine in-pit tailings management facility (TMF) (425 m long×300 m wide×91 m deep) is located in northern Saskatchewan, Canada. The objectives of this study were to quantify the distribution of As phases in the tailings and evaluate the present-day geochemical controls on dissolved As. These objectives were met by analyzing pore fluid samples collected from the tailings body for dissolved constituents, measuring Eh, pH, and temperature of tailings core and pore fluid samples, conducting sequential extractions on solid samples, conducting geochemical modeling of pore fluid chemistry using available thermodynamic data, and by reviewing historical chemical mill process records. Dissolved As concentrations in 5 monitoring wells installed within the tailings body ranged from 9.6 to 71 mg/l. Pore fluid in the wells had a pH between 9.3 and 10.3 and Eh between +58 and +213 mV. Sequential extraction analyses of tailings samples showed that the composition of the solid phase As changed at a depth of 34 m. The As above 34 m was primarily associated with amorphous Fe and metal hydroxides while the As below 34 m was associated with Ca, likely as amorphous poorly ordered calcium arsenate precipitates. The change in the dominant As solid phases at this depth was attributed to the differences in the molar ratio of Fe to As in the mill tailings. Below 34 m it was <2 whereas above 34 m it was >4. The high Ca/As ratio during tailings neutralization would likely precipitate Ca4(OH)2(AsO4)2:4H2O type Ca arsenate minerals. Geochemical modeling suggested that if the pore fluids were brought to equilibrium with this Ca-arsenate, the long-term dissolved As concentrations would range between 13 and 126 mg/l.  相似文献   

8.
 A detailed investigation of the mineralogy of As in the tailings of the Rabbit Lake uranium ore processing facility was conducted. The milling/ore extraction process was sampled at three different locations to obtain information about when, where and under what condition secondary As phases form. These samples were compared with four samples of varying As content from the Rabbit Lake in-pit tailings management facility (TMF). Up to 20% As in the tailings are present in primary minerals that reach the tailings directly because they are not dissolved during the uranium extraction. The remaining 80% constitute As that was dissolved during ore extraction and then re-precipitated before being discharged into the tailings pond. It was not possible to conclusively identify any individual re-precipitated (secondary) As minerals in the Rabbit Lake TMF. Indirect evidence from sequential extraction analyses suggests the presence of an amorphous Ca-As phase and a possible, but unlikely, minor amount of an amorphous Fe-As phase. However, the close association between hydrous ferric oxide (HFO) and As could be clearly demonstrated. HFO was identified to be 2-line ferrihydrite and its XRD pattern geometry indicates a substantial amount of adsorbed As. This is in good agreement with SEM, TEM and sequential extraction analyses that all showed the close association of HFO and As. Received: 14 February 2000 · Accepted: 9 May 2000  相似文献   

9.
Hardpans, or cemented layers, form by precipitation and cementation of secondary minerals in mine tailings and may act as both physical and chemical barriers. Precipitation of secondary minerals during weathering of tailings can sequester metal(loid)s, thereby limiting their release to the environment. At Montague Gold Mines in Nova Scotia, tailings are partially cemented by the Fe arsenate mineral scorodite (FeAsO4·2H2O). Previous studies have shown that the formation of scorodite can effectively limit aqueous As concentrations due to its relatively low solubility (<1 mg/L at pH 3–4) and high As content (43–52 wt.% As2O5, this study). Co-existing waters and solids were sampled at Montague Gold Mines to identify present-day field conditions influencing scorodite precipitation and dissolution, and to better understand the mineralogical and chemical relationship between hardpan and tailings. In addition to scorodite, hardpan cements were found to include amorphous Fe arsenate and Fe oxyhydroxide. Nearly all hardpan is associated with historical arsenopyrite-bearing concentrate which provides a source of acidity, As5+ and Fe3+ for secondary mineral precipitation. Pore waters sampled from the hardpan have pH values ranging from 2.43 to 7.06. Waters with the lowest pH values also have the highest As concentrations (up to 35.8 mg/L) and are associated with the most extensive hardpan and greatest amount of weathered sulfide. Samples from areas with discontinuous hardpan and less sulfide have near-neutral pH and lower As concentrations. Detailed petrographic observations indicate that the identity and stability of As-bearing secondary minerals depends on the continued availability of sulfide concentrate. The results of this study are being used to develop remediation strategies for highly weathered, hardpan-bearing tailings that consider the stability of both primary and secondary minerals under various cover scenarios.  相似文献   

10.
Nearly half a century after mine closure, release of As from the Ylöjärvi Cu–W–As mine tailings in groundwater and surface water run-off was observed. Investigations by scanning electron microscopy (SEM), electron microprobe analysis (EMPA), synchrotron-based micro-X-ray diffraction (μ-XRD), micro-X-ray absorption near edge structure (μ-XANES) and micro-extended X-ray absorption fine structure (μ-EXAFS) spectroscopy, and a sequential extraction procedure were performed to assess As attenuation mechanisms in the vadose zone of this tailings deposit. Results of SEM, EMPA, and sequential extractions indicated that the precipitation of As bearing Fe(III) (oxy)hydroxides (up to 18.4 wt.% As2O5) and Fe(III) arsenates were important secondary controls on As mobility. The μ-XRD, μ-XANES and μ-EXAFS analyses suggested that these phases correspond to poorly crystalline and disordered As-bearing precipitates, including arsenical ferrihydrite, scorodite, kaňkite, and hydrous ferric arsenate (HFA). The pH within 200 cm of the tailings surface averaged 5.7, conditions which favor the precipitation of ferrihydrite. Poorly crystalline Fe(III) arsenates are potentially unstable over time, and their transformation to ferrihydrite, which contributes to As uptake, has potential to increase the As adsorption capacity of the tailings. Arsenic mobility in tailings pore water at the Ylöjärvi mine will depend on continued arsenopyrite oxidation, dissolution or transformation of secondary Fe(III) arsenates, and the As adsorption capacity of Fe(III) (oxy)hydroxides within this tailings deposit.  相似文献   

11.
Processing of arsenopyrite ore took place at Blackwater Au mine, New Zealand, between 1908 and 1951 and no rehabilitation was undertaken after mine closure. High As concentrations in solid processing residues (up to 40 wt% As) are due to secondary As minerals. Site pH regimes vary from 4.1 to circum-neutral. Originally, all processed As was present as arsenolite (arsenic trioxide polymorph, AsIII), a by-product of arsenopyrite roasting. Near the roaster, scorodite precipitated as a result of the high dissolved As concentration during arsenolite dissolution. The formation of scorodite has two major consequences. Firstly, the scorodite precipitate cements the ground in the vicinity of the roaster area, thereby creating an impermeable surface crust (up to 30 wt% As) and encapsulating weathered arsenolite grains within the cement. Secondly, formation of scorodite temporarily immobilizes some of the dissolved As that is generated during nearby arsenolite dissolution. Where all the available arsenolite has dissolved, scorodite becomes soluble, and the dissolved As concentrations are controlled by scorodite solubility, which is at least two orders of magnitudes lower than arsenolite solubility. Downstream Eh conditions fall below the AsV/AsIII boundary, so that scorodite does not precipitate and dissolved As concentrations are controlled by arsenolite solubility. Dissolved As reaches up to 52 mg/L in places, and exceeds the current WHO drinking water guideline of 0.01 mg/L by 5200 times. This study shows that dissolved As concentrations in discharge waters at historic mine sites are dependent on the processing technology and associated mineralogy.  相似文献   

12.
《Applied Geochemistry》2006,21(8):1301-1321
Low-quality pore waters containing high concentrations of dissolved H+, SO4, and metals have been generated in the East Tailings Management Area at Lynn Lake, Manitoba, as a result of sulfide-mineral oxidation. To assess the abundance, distribution, and solid-phase associations of S, Fe, and trace metals, the tailings pore water was analyzed, and investigations of the geochemical and mineralogical characteristics of the tailings solids were completed. The results were used to delineate the mechanisms that control acid neutralization, metal release, and metal attenuation. Migration of the low-pH conditions through the vadose zone is limited by acid-neutralization reactions, resulting in the development of distinct pore-water pH zones at depth; the neutralization reactions involve carbonate (pH ⩾ 5.7), Al-hydroxide (pH ⩾ 4.0), and aluminosilicate solids. As the zone of low-pH pore water expands, the pH will then be primarily controlled by less soluble solids, such as Fe(III) oxyhydroxides (pH < 3.5) and the relatively more recalcitrant aluminosilicates (pH ⩾ 1.3). Precipitation/dissolution reactions involving secondary Fe(III) oxyhydroxides and hydroxysulfates control the concentrations of dissolved Fe(III). Concentrations of dissolved SO4 are principally controlled by the formation of gypsum and jarosite. Geochemical extractions indicate that the solid-phase concentrations of Ni, Co, and Zn are associated predominantly with reducible and acid-soluble fractions. The concentrations of dissolved trace metals are therefore primarily controlled by adsorption/complexation and (or) co-precipitation/dissolution reactions involving secondary Fe(III) oxyhydroxide and hydroxysulfate minerals. Concentrations of dissolved metals with relatively low mobility, such as Cu, are also controlled by the precipitation of discrete minerals. Because the major proportion of metals is sequestered through adsorption and (or) co-precipitation, the metals are susceptible to remobilization if low-pH or reducing conditions develop within the tailings.  相似文献   

13.
The pore-water geochemistry and mineralogy of tailings derived from a granitic tungsten deposit were characterized by collecting pore-water samples at discrete depth intervals throughout the tailings for the analysis of major and minor element concentrations. Mineralogical samples from the oxidation zone were analyzed by X-ray diffraction, scanning electron microscopy combined with energy dispersive X-ray spectroscopy (SEM/EDS), electron microprobe (EMP) combined with wavelength dispersive X-ray spectroscopy (WDS), and transmission electron microscopy (TEM). The oxidation of sulfide minerals in the near-surface tailings leads to a decrease in pore-water pH and elevated SO4, As, and metal concentrations. The unusual mineralogy of this deposit, compared with that of commonly studied base-metal and gold deposits, results in several unique geochemical characteristics. The dissolution of fluorite releases F into the pore water; the F forms strong complexes with Al and enhances the dissolution of aluminosilicate minerals within the oxidation zone. As a result, high Al concentrations (up to 151.7 mg/L) are detected in the near-neutral pore water in the oxidation zone. The combined dissolution of aluminosilicates and carbonate minerals maintains the pH near 10 in the pore water at depth. Elevated concentrations of W (up to 7.1 mg/L) are detected in the pore water throughout the tailings, likely as a result of the dissolution of wolframite. Consistent with geochemical model calculations, results from SEM/EDS, EMP/WDS and TEM/EDS analyses indicate that secondary minerals, which occur as orange-brown coatings on grains of primary-minerals, are Fe oxyhydroxides. Examples of these secondary minerals display a fibrous habit at high resolution in the TEM. One of these minerals, which contains substantial amounts of Al, As, and Si as impurities, was identified by selected-area electron diffraction (SAED) analyses to be goethite. Another mineral contains relatively high amounts of Si, Pb, Bi, and As, and SAED analyses suggest that the mineral is two-line ferrihydrite.  相似文献   

14.
Remediation of a legacy tin-tailings site in northeast Tasmania, Australia was carried out by statutory authorities. This study evaluated the fate of As and other deleterious trace metals Cd, Cu, Fe and Zn (among others) following the application of lime and fertiliser. Arsenic concentrations in the tailings ranged from 86 mg/kg to 0.26 wt%. Surface application of lime resulted in a 100-fold reduction in dissolved As concentrations in on-site surface waters; from an average of 196 µg/L prior to lime addition, to between 2.0 and 7.4 µg/L post-amendment. The concentration of other deleterious elements, however, varied between dry and wet cycles. The concentrations of Cd, Cu and Zn in surface waters were high and similar to pre-remediation levels during dry conditions (0.4, 13.5 and 6.1 mg/L, respectively), and only below freshwater ecosystem protection values during wet conditions. Bioaccumulation of Cd was observed in the naturally occurring coloniser, Juncus pallidus, with 4–5 times more Cd in the above-ground biomass relative to the tailings. Ferric arsenate (scorodite) was the dominant source of As identified in the tailings mineralogy. Hydrous ferric oxides and Fe-bearing cassiterite were also identified as hosting As. The pH increase in the surface lime-amended tailings was inferred to result in precipitation of observed hydrous ferric oxides, hematite and goethite, providing high-surface area for adsorption of arsenate onto positively charged surfaces. Jarosite was observed in both the surface lime-amended and subsurface non-amended tailings and suggests a continued supply of acidity to the pore waters despite the application of lime. Leaching experiments showed that As was more mobile in the lime-dosed tailings than in subsurface non-amended tailings, likely owing to desorption in alkaline pH conditions. By contrast, the mobility of Cd, Cu and Zn in the surface lime-amended tailings was reduced by at least two orders of magnitude compared with subsurface non-amended tailings. Evaluation of the applied rehabilitation strategy highlights the limits of a single chemical remediation approach to a polymetallic (including metalloids) waste with complex mineralogy and large seasonal fluctuations. Rehabilitation of metalliferous mine sites requires a complete understanding of all environmentally significant elements and their pathways into local receptors.  相似文献   

15.
Many abandoned mine sites in Cornwall, UK, are characterised by elevated concentrations of arsenic (As), which can cause contamination of surrounding soil and water resources. These sites have important historical value that requires access to be maintained, despite exposure of humans to toxins that may lead to health issues including hyperpigmentation keratosis (including skin cancers) and liver fibrosis. The abandoned mine tailings at Wheal Maid has been assessed for As-bearing mineralogy and stability taking into account the public footpaths made by the local council to areas of potential contamination.To assess the potential risk associated with these mine sites, the As concentration in waters along the tailings dam and Carnon River have been measured and range up to 3.6 ppm, which is 2 orders of magnitude above the WHO guideline value of 0.01 ppm for drinking water. Samples of water, rocks and soils from the mine tailings ponds and the Carnon River were analysed using Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES) and Inductively Coupled Plasma – Mass Spectrometry (ICP-MS) to determine the concentration of individual elements in each sample followed by mineral identification using X-Ray Diffraction (XRD). Mineralogical evaluation indicated that the majority of mine tailings consist of clay-rich rocks, with few associated As-bearing minerals. Scorodite (FeAsO4·2H2O) is observed in the mine tailings pond and appears critical to the As distribution and storage in this surface environment. Using the analysed water chemistry, a modified version of PHREEQC is used to calculate the saturation index of scorodite as a function of pH conditions. The strong variation of the solubility of this mineral with pH and oxidation state highlights potential risks for using scorodite for As fixation and storage.  相似文献   

16.
This study was conducted to define the geochemical controls on 226Ra during raffinate (pH = 1.2) neutralization to pH 10 at the Key Lake U mill in northern Saskatchewan, Canada. High activities (120–150 Bq/L) of aqueous phase 226Ra are present in raffinate produced during milling of U ore. The solubility control of 226Ra in the SO4-rich, hydrometallurgical raffinate solutions often involves the addition of BaCl2 to form a radium-barite co-precipitate (Ba(Ra)SO4). As such, neutralization experiments were conducted with samples of mill raffinate using Ca(OH)2 or NaOH with and without the addition of BaCl2. Radium-226 activity decreased from 150 to <4 Bq/L for all combinations of neutralizing agents with Ca(OH)2 + BaCl2 being the most effective combination (final activity ∼1.0 Bq/L; ∼99.3% removal). In the absence of BaCl2, Ca(OH)2 more efficiently removed 226Ra than NaOH between pH 4 and 8, due to the co-precipitation of 226Ra with gypsum. Overall, neutralization with the addition of BaCl2 reduced 226Ra activities at lower pH values (by pH 4.5), due to co-precipitation of 226Ra with BaSO4. At varying concentrations of BaCl2, aqueous phase activities of 226Ra converged, but did not attain steady-state values during neutralization and would continue to decrease with time. Sequential extractions indicated that 226Ra in precipitates formed during neutralization of the mill raffinate is dominated by amorphous and crystalline Fe hydroxide phases, consistent with raffinate neutralization experiments that showed that adsorption onto ferrihydrite can remove most 226Ra in the raffinate. Data generated in this study are being used to define the long-term geochemical controls on 226Ra in U mill processes and tailings.  相似文献   

17.
Small-scale mining and mineral processing at the Webbs Consols polymetallic PbZnAg deposit in northern New South Wales, Australia has caused a significant environmental impact on streams, soils and vegetation. Unconfined waste rock dumps and tailings dams are the source of the problems. The partly oxidised sulphidic mine wastes contain abundant sulphides (arsenopyrite, sphalerite, galena) and oxidation products (scorodite, anglesite, smectite, Fe-oxyhydroxides), and possess extreme As and Pb (wt% levels) and elevated Ag, Cd, Cu, Sb and Zn values. Contemporary sulphide oxidation, hardpan formation, crystallisation of mineral efflorescences and acid mine drainage generation occur within the waste repositories. Acid seepages (pH 1.9–6.0) from waste dumps, tailings dams and mine workings display extreme As, Pb and Zn and elevated Cd, Cu and Sb contents. Drainage from the area is by the strongly contaminated Webbs Consols Creek and although this stream joins and is diluted by the much larger Severn River, contamination of water and stream sediments in the latter is evident for 1–5 km, and 12 km respectively, downstream of the mine site. The pronounced contamination of local and regional soils and sediments, despite the relatively small scale of the former operation, is due to the high metal tenor of abandoned waste material and the scarcity of neutralising minerals. Any rehabilitation plan of the site should include the relocation of waste materials to higher ground and capping, with only partial neutralisation of the waste to pH 4–5 in order to limit potential dissolution of scorodite and mobilisation of As into seepages and stream waters.  相似文献   

18.
Mine drainage from the weathering of sulfide minerals and magnetite   总被引：1，自引：0，他引：1  
Pyrite and pyrrhotite are the principal minerals that generate acid drainage in mine wastes. Low-pH conditions derived from Fe-sulfide oxidation result in the mobilization of contaminant metals (such as Zn, Cd, Ni and Cr) and metalloids (such as As) which are of environmental concern. This paper uses data from detailed mineralogical and geochemical studies conducted at two Canadian tailings impoundments to examine the mineralogical changes that pyrite, pyrrhotite, sphalerite and magnetite undergo during and after sulfide oxidation, and the subsequent release and attenuation of associated trace elements. The stability of sphalerite in tailings impoundments generally is greater than that of pyrrhotite, but less than pyrite. Dissolved Ni and Co derived from Fe sulfides, and to a lesser extent, dissolved Zn and Cd from sphalerite, are commonly attenuated by early-formed Fe oxyhydroxides. As oxidation progresses, a recycling occurs due to continued leaching from low-pH pore waters and because the crystallinity of Fe oxyhydroxides gradually increases which decreases their sorptive capacity. Unlike many other elements, such as Cu, Pb and Cr, which form secondary minerals or remain incorporated into mature Fe oxyhydroxides, Zn and Ni become mobile. Magnetite, which is a potential source of Cr, is relatively stable except under extremely low-pH conditions. A conceptual model for the sequence of events that typically occurs in an oxidizing tailings impoundment is developed outlining the progressive oxidation of a unit of mine waste containing a mixed assemblage of pyrrhotite and pyrite.  相似文献   

19.
Scorodite, ferric arsenate and arsenical ferrihydrite are important arsenic carriers occurring in a wide range of environments and are also common precipitates used by metallurgical industries to control arsenic in effluents. Solubility and stability of these compounds are controversial because of the complexities in their identification and characterization in heterogeneous media. To provide insights into the formation of scorodite, ferric arsenate and ferrihydrite, series of synthesis experiments were carried out at 70 °C and pH 1, 2, 3 and 4.5 from 0.2 M Fe(SO4)1.5 solutions also containing 0.02-0.2 M Na2HAsO4. The precipitates were characterized by transmission electron microscopy, X-ray diffraction and X-ray absorption fine structure techniques. Ferric arsenate, characterized by two broad diffuse peaks on the XRD pattern and having the structural formula of FeAsO4·4-7H2O, is a precursor to scorodite formation. As defined by As XAFS and Fe XAFS, the local structure of ferric arsenate is profoundly different than that of scorodite. It is postulated that the ferric arsenate structure is made of single chains of corner-sharing Fe(O,OH)6 octahedra with bridging arsenate tetrahedra alternating along the chains. Scorodite was precipitated from solutions with Fe/As molar ratios of 1 over the pH range of 1-4.5. The pH strongly controls the kinetics of scorodite formation and its transformation from ferric arsenate. The scorodite crystallite size increased from 7 to 33 nm by ripening and aggregation. Precipitates, resulting from continuous synthesis at pH 4.5 from solutions having Fe/As molar ratios ranging from 1 to 4 and resembling the compounds referred to as ferric arsenate, arsenical ferrihydrite and As-rich hydrous ferric oxide in the literature, represent variable mixtures of ferric arsenate and ferrihydrite. When the Fe/As ratio increases, the proportion of ferrihydrite increases at the expense of ferric arsenate. Arsenate adsorption appears to retard ferrihydrite growth in the precipitates with molar Fe/As ratios of 1-4, whereas increased reaction gradually transforms two-line ferrihydrite to six-line ferrihydrite at Fe/As ratios of 5 and greater.  相似文献   

20.
Lacustrine sediments, submerged tailings, and their pore waters have been collected at several sites in Yellowknife Bay, Great Slave Lake, Canada, in order to investigate the biogeochemical controls on the remobilization of As from mining-impacted materials under different depositional conditions. Radiometric dating confirms that a mid-core enrichment of Pb, Zn, Cu and Sb corresponds to the opening of a large Au mine 60 a ago. This was evident even in a relatively remote site. Arsenic was enriched at mid-core, coincident with mining activity, but clearly exhibited post-depositional mobility, migrating upwards towards the sediment water interface (SWI) as well as down-core. Deep-water (15 m) Yellowknife Bay sediments that contain buried mine waste are suboxic, relatively organic-rich and abundant in microbes with As in pore waters and sediments reaching 585 μg/L and 1310 mg/kg, respectively. Late summer pore waters show equal proportions of As(III) and As(V) (16–415 μg/L) whereas late winter pore waters are dominated by As(III) (284–947 μg/L). This can be explained by As(III) desorption mechanisms associated with the conversion of FeS to FeS2 and the reduction of As(V) to As(III) through the oxidation of dissolved sulfide, both microbially-mediated processes. Processes affecting As cycling involve the attenuating efficiency of the oxic zone at the SWI, sediment redox heterogeneity and the reductive dissolution of Fe(hydr)oxides by labile organic matter, temporarily and spatially variable.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号