首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
《Tectonophysics》1986,125(4):357-370
The Hermitage Granite, situated in the northwest Massif Central (France) is a syntectonic Hercynian leucogranite emplaced along an active transcurrent shear zone. During emplacement and cooling, the progressive deformation is marked by the development of a primary homogeneous foliation gradually affected by ductile shear bands (C-S mylonites). Increase in strain heterogeneity during cooling corresponds to a change of dominant deformation mechanism of the quartz phase from grain growth and migration recrystallization to intracrystalline 〈a〉 slip and rotation recrystallization. Migration recrystallization is characterized by preferred orientations of c axes close to the principal extension direction. We discuss relevant deformation mechanisms and rheological implications for syntectonic plutons. In particular, we argue that the transitions between homogeneous and heterogeneous accumulation of strain cannot generally be correlated with transition between magmatic and solid-state flow.  相似文献   

2.
In the Dora Maira Massif, western Alps, essentially undeformed ultrahigh-pressure (UHP) metamorphic granites (Brossasco granite) are embedded in, and locally grade into, granite gneisses or augengneisses and mylonites. In this study, the quartz microfabrics of the undeformed granites are compared against the augengneisses and mylonites in a representative number of samples from several locations. In the undeformed granites, the fine-grained quartz aggregates that formed from coesite upon decompression are characterized by a foam structure and random crystallographic orientation. In the deformed granites, the quartz microstructures and the crystallographic preferred orientation (CPO) indicate deformation by dislocation creep. Most of the deformation of the granites (if not all) must have happened at a late stage during exhumation, after transformation of coesite to quartz, at greenschist facies conditions in the middle crust. The deformed granites provide no evidence of deformation during subduction, at (U)HP metamorphic conditions, and in the earlier stages of exhumation. The diameter of internally undeformed slices of continental crust subducted to and exhumed from about 100 km can exceed that of the presently exposed Brossasco granite, i.e. it can be on the kilometre scale.  相似文献   

3.
The Karakoram Shear Zone is a northwest-southeast trending dextral ductile shear zone, which has affected the granitic and granodioritic bodies of the southern Asian Plate margin in three distinct episodes. The ductile shearing of the granitic bodies at Tangste and Darbuk has resulted in the development of mylonites with mylonitic foliation and stretching lineation. More intense deformation is noted in the Tangste granite grading up to orthomylonite, as compared to the Darbuk granite. Kinematic indicators include S-C foliation, synthetic C′ and C″ antithetic shear bands, Type A s-mantled porphyroclasts, oblique quartz foliation, micro-shears with bookshelf gliding, mineral fishes including Group 2 mica fishes, and Type 1 and 2a pull-apart microstructures, and exhibit strong dextral sense of ductile shearing towards southeast. The textural features of the minerals, especially that of quartz and feldspar, indicate temperature of mylonitisation ranging between 300 and 500°C in the upper greenschist facies, and appear to have been evolved during exhumation as a consequence of oblique strike-slip movements along the Karakoram shear zone.  相似文献   

4.
There is a large ductile shear zone, 2 km wide and more than 3SO km long, in the South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareous mylonites. The microstructures of the ductile shear zone show nearly E-W extending subvertical foliation, horizontal and oblique stretching lineations, shearing sense from sinis-tral to oblique sinistral strike-slip from east to west, "A" type folds and abundant granitic veins. Measured lattice preferred orientations (LPOs) of the mylonitic and recrystallized quartz of the granitic mylonite in the west segment suggest a strong LPO characterized by the dominant slip systems {1010} formed at high temperature (>650℃). K-feldspar of the mylonite shows an 39Ar/40Ar high-temperature plateau age of 243.3±1.3 Ma, and biotite, 250.5±0.5 Ma, which represent the formation age of the ductile shear zone. The 39Ar/40Ar plateau ages of 169.7±0.3 Ma and 160.6±0.1 Ma and the 39Ar/40Ar isochron ages of 166.99±2.37 Ma and 160.6±0.1 Ma of biot  相似文献   

5.
Quartz microfabrics and associated microstructures have been studied on a crustal shear zone—the Main Central Thrust (MCT) of the Himalaya. Sampling has been done along six traverses across the MCT zone in the Kumaun and Garhwal sectors of the Indian Himalaya. The MCT is a moderately north-dipping shear zone formed as a result of the southward emplacement of a part of the deeply rooted crust (that now constitutes the Central Crystalline Zone of the Higher Himalaya) over the less metamorphosed sedimentary belt of the Lesser Himalaya. On the basis of quartz c- and a-axis fabric patterns, supported by the relevant microstructures within the MCT zone, two major kinematic domains have been distinguished. A noncoaxial deformation domain is indicated by the intensely deformed rocks in the vicinity of the MCT plane. This domain includes ductilely deformed and fine-grained mylonitic rocks which contain a strong stretching lineation and are composed of low-grade mineral assemblages (muscovite, chlorite and quartz). These rocks are characterized by highly asymmetric structures/microstructures and quartz c- and a-axis fabrics that indicate a top-to-the-south sense that is compatible with south-directed thrusting for the MCT zone. An apparently coaxial deformation domain, on the other hand, is indicated by the rocks occurring in a rather narrow belt fringing, and structurally above, the noncoaxial deformation domain. The rocks are highly feldspathic and coarse-grained gneisses and do not possess any common lineation trend and the effects of simple shear deformation are weak. The quartz c-axis fabrics are symmetrical with respect to foliation and lineation. Moreover, these rocks contain conjugate and mutually interfering shear bands, feldspar/quartz porphyroclasts with long axes parallel to the macrosopic foliation and the related structures/microstructures, suggesting deformation under an approximate coaxial strain path.On moving towards the MCT, the quartz c- and a-axis fabrics become progressively stronger. The c-axis fabric gradually changes from random to orthorhombic and then to monoclinic. In addition, the coaxial strain path gradually changes to the noncoaxial strain path. All this progressive evolution of quartz fabrics suggests more activation of the basal, rhomb and a slip systems at all structural levels across the MCT.  相似文献   

6.
Microfabrics were analysed in calcite mylonites from the rim of the Pelvoux massif (Western Alps, France). WNW-directed emplacement of the internal Penninic units onto the Dauphinois domain produced intense deformation of an Eocene-age nummulitic limestone under lower anchizone metamorphic conditions (slightly below 300 °C). Two types of microfabrics developed primarily by dislocation creep accompanied by dynamic recrystallisation in the absence of twinning. Coaxial kinematics are inferred for samples exhibiting grain shape fabrics and textures with orthorhombic symmetry. Their texture (crystallographic preferred orientation, CPO) is characterised by two c-axis maxima, symmetrically oriented at 15° from the normal to the macroscopic foliation. Non-coaxial deformation is evident in samples with monoclinic shape fabrics and textures characterised by a single oblique c-axis maximum tilted with the sense of shear by about 15°. From the analysis of suitably oriented slip systems for the main texture components under given kinematics it is inferred that the orthorhombic textures, which developed in coaxial kinematics, favour activity of <10–11> and <02–21> slip along the f and r planes, respectively, with minor contributions of basal-<a> slip. In contrast, the monoclinic textures, which developed during simple shear, are most suited for duplex <a> slip along the basal plane. The transition between the dominating slip systems for the orthorhombic and monoclinic microfabrics is interpreted to be due to the effects of dynamic recrystallisation upon texture development. Since oblique c-axis maxima documented in the literature are most often rotated not with but against the shear sense, calcite textures alone should not be used as unequivocal shear sense indicators, but need to be complemented by microstructural criteria such as shape preferred orientations, grain size estimates and amount of twinning.  相似文献   

7.
Mylonites derived largely from granite, pegmatite and sedimentary quartzite occupy a 500 m thick, gently N-dipping zone along the northern flank of the Coyote Mountains, west of Tucson, in southeastern Arizona. The quartzite mylonites are exceptionally well developed and occur as discrete layers and lenses, 2–5 m thick, within yet thicker, boudinaged, sill-like lenses of mylonitic pegmatite. Mylonitization took place in the Tertiary within a normal-slip ductile shear zone. The shear zones formed in response to regional extension of continental crust. Extension is along a north-south line, and N-directed sense of shear is revealed by mica fish, oblique foliations in dynamically recrystallized quartz aggregates, and asymmetric quartz c-axis fabrics. The microstructures and c-axis fabrics, taken together, disclose that ductile and brittle deformation was achieved by intense, penetrative, non-coaxial laminar flow dominated by progressive simple shear.  相似文献   

8.
内蒙古色尔腾山地区花岗绿岩带糜棱岩变形变质过程探讨   总被引：2，自引：0，他引：2  
采用不同研究方法分析和解读岩石和矿物的显微构造特征，能再造结晶基底岩石复杂的变形和变质演化过程和条件。通过对色尔腾山地区花岗绿岩带中韧性剪切带的糜棱岩显微构造、石英组构、矿物化学等综合分析，发现该区糜棱岩在经历了低角闪岩相区域变质及绿帘角闪岩相退变质变形之后，发生了不均匀进变质重结晶作用及中低绿片岩相退变质变形等几个演化阶段。由不同阶段温压条件所限定的p-T演化轨迹为一个在早期顺时针的基础上叠加了一个晚期逆时针环的复杂图像。  相似文献   

9.
The polyphase evolution of the Seridó Belt (NE-Brazil) includes D1 crust formation at 2.3–2.1 Ga, D2 thrust tectonics at 1.9 Ga and crustal reworking by D3 strike-slip shear zones at 600 Ma. Microstructural investigations within mylonites associated with D2 and D3 events were used to constrain the tectono-thermal evolution of the belt. D2 shear zones commenced at deeper crustal levels and high amphibolite facies conditions (600–650 °C) through grain boundary migration, subgrain rotation and operation of quartz c-prism slip. Continued shearing and exhumation of the terrain forced the re-equilibration of high-T fabrics and the switching of slip systems from c-prism to positive and negative a-rhombs. During D3, enhancement of ductility by dissipation of heat that came from syn-D3 granites developed wide belts of amphibolite facies mylonites. Continued shearing, uplift and cooling of the region induced D3 shear zones to act in ductile-brittle regimes, marked by fracturing and development of thinner belts of greenschist facies mylonites. During this event, switching from a-prism to a-basal slip indicates a thermal path from 600 to 350 °C. Therefore, microstructures and quartz c-axis fabrics in polydeformed rocks from the Seridó Belt preserve the record of two major events, which includes contrasting deformation mechanisms and thermal paths.  相似文献   

10.
  相似文献   

11.
The Sierra Ballena Shear Zone (SBSZ) is part of a high-strain transcurrent system that divides the Neoproterozoic Dom Feliciano Belt of South America into two different domains. The basement on both sides of the SBSZ shows a deformation stage preceding that of the transcurrent deformation recognized as a high temperature mylonitic foliation associated with migmatization. Grain boundary migration and fluid-assisted grain boundary diffusion enhanced by partial melting were the main deformation mechanisms associated with this foliation. Age estimate of this episode is >658 Ma. The second stage corresponds to the start of transpressional deformation and the nucleation and development of the SBSZ. During this stage, pure shear dominates the deformation, and is characterized by the development of conjugate dextral and sinistral shear zones and the emplacement of syntectonic granites. This event dates to 658–600 Ma based on the age of these intrusions. The third stage was a second transpressional event at about 586 to <560 Ma that was associated with the emplacement of porphyry dikes and granites that show evidence of flattening. Deformation in the SBSZ took place, during the late stages, under regional low-grade conditions, as indicated by the metamorphic paragenesis in the supracrustals of the country rocks. Granitic mylonites show plastic deformation of quartz and brittle behavior of feldspar. A transition from magmatic to solid-state microstructures is also frequently observed in syntectonic granites. Mylonitic porphyries and quartz mylonites resulted from the deformation of alkaline porphyries and quartz veins emplaced in the shear zone. Quartz veins reflect the release of silica associated with the breakdown of feldspar to white mica during the evolution of the granitic mylonites to phyllonites, which resulted in shear zone weakening. Quartz microstructures characteristic of the transition between regime 2 and regime 3, grain boundary migration and incipient recrystallization in feldspar indicate deformation under lower amphibolite to upper greenschist conditions (550–400°C). On the other hand, the mylonitic porphyries display evidence of feldspar recrystallization suggesting magmatic or high-T solid-state deformation during cooling of the dikes.  相似文献   

12.
The nature and extent of deformation associated with 1.4 Ga tectonism in the south-western USA are poorly understood. Two models have been proposed. Both agree that Proterozoic crustal accretion occurred at 1.65 Ga and that the rocks remained at mid-crustal conditions ( c . 12 km depth) until 1.4 Ga. However, one model suggests that 1.4 Ga deformation was regionally extensive, the other that it was localized around 1.4 Ga plutons. Following 1.4 Ga tectonism, the crust cooled below 300 °C. Detailed studies of quartz mylonite microfabrics in samples both adjacent to and removed from 1.4 Ga plutons in the Manzano Mountains, central New Mexico, are used to discriminate between these models of mid-Proterozoic thermotectonic history. In this area, as in much of northern New Mexico, the metamorphic conditions prior to emplacement of 1.4 Ga plutons were 500 °C and 4 kbar. The quartz mylonite microfabrics include ribbon grains, recrystallized grains with serrated boundaries, and strong c-axis crystallographic preferred orientations, which indicate no post-deformational modification. All of these microfabrics are consistent with deformation at upper greenschist/lower amphibolite facies conditions, and could have formed during either 1.65 or 1.4 Ga tectonism. Microfabrics formed during 1.65 Ga tectonism, however, should have been substantially modified by annealing recrystallization during residency in the middle crust and/or thermal/mechanical effects associated with 1.4 Ga tectonism. The observed microstructures are consistent with regional deformation associated with metamorphism at 1.4 Ga. The effects of deformation at 1.4 Ga in New Mexico are therefore more widespread than previously thought.  相似文献   

13.
The calcite mylonites in the Xar Moron-Changchun shear zone show a significance dextral shearing characteristics. The asymmetric(σ-structure) calcite/quartz grains or aggregates, asymmetry of calcite c-axes fabric diagrams and the oblique foliation of recrystallized calcite grains correspond to a top-to-E shearing. Mineral deformation behaviors, twin morphology, C-axis EBSD fabrics, and quartz grain size-frequency diagrams demonstrate that the ductile shear zone was developed under conditions of greenschist facies, with the range of deformation temperatures from 200 to 300°C. These subgrains of host grains and surrounding recrystallized grains, strong undulose extinction, and slightly curved grain boundaries are probably results of intracrystalline deformation and dynamic recrystallization implying that the deformation took place within the dislocation-creep regime at shallow crustal levels. The calculated paleo-strain rates are between 10~(–7.87)s~(–1) and 10~(–11.49)s~(–1) with differential stresses of 32.63–63.94 MPa lying at the higher bound of typical strain rates in shear zones at crustal levels, and may indicate a relatively rapid deformation. The S-L-calcite tectonites have undergone a component of uplift which led to subhorizontal lifting in an already non-coaxial compressional deformation regime with a bulk pure shear-dominated general shear. This E-W large-scale dextral strike-slip movement is a consequence of the eastward extrusion of the Xing'an-Mongolian Orogenic Belt, and results from far-field forces associated with Late Triassic convergence domains after the final closure of the Paleo-Asian Ocean.  相似文献   

14.
张波  张进江  郭磊 《地质科学》2006,41(1):158-169
位于北喜马拉雅穹隆带东段的然巴构造穹隆外围发育环形韧性剪切带,带内岩石经韧性剪切形成各类糜棱状岩石。石英为带内变形岩中最为常见的造岩矿物,在不同的温度、应变速率下产生不同的显微构造,其中动态重结晶最为常见。重结晶新晶颗粒边界普遍具有锯齿状或港湾状结构,是应变和变形环境的天然记录。新晶粒分维几何统计分析表明:带内动态重结晶石英颗粒边界形态具有自相似性(1≤D≤2),表现出分形特征,分维数值为1.14～1.19,变形温度大约500℃。同构造变质环境属中——高绿片岩相;初步估算古应变速率可能低于10-9.5S-1;根据重结晶粒径估算变形古应力6.2～58.8MPa。  相似文献   

15.
Abstract

The Cadomian Dyje Batholith, in the foot–wall of the Variscan Moravian nappe pile, has been involved in Variscan ductile deformation. The Cadomian Brunovistulian rocks were obliquely underthrusted during Carboniferous dextral transpression.

Strain intensity is inversely proportional to the distance from the contact of the Variscan thrust front. The microstructures of deformed granodiorites and quartz–diorites show a characteristic zonality marked by relatively high temperature flow in the west (550–580 °C) characterized by dynamic recrystallization of feldspars and grain boundary migration recrystallization of quartz. The size of quartz grains decreases with decreasing strain towards the east. At the easternmost part of the autochthonous Dyje massif, fracturing of feldspar and subgrain rotation recrystallization of quartz predominate. Flow stress estimates calculated from recrystallized quartz grain size show a regional increase of stress intensity from the highly strained margin towards the less deformed core of the Dyje massif. This microstructural zonation is oblique with respect to the major thrust boundary and corresponds roughly to metamorphic isogrades. The microstructural zonation reflects underthrusting of the Brunovistulian domain below the Moldanubian nappe.

The main ductile tectonic event D1 is followed by a retrogressive brittle–ductile and brittle deformation D2. D2 results in the development of shear zones and faults superimposed on the D1 mylonite fabric. D2 is related to extension oblique to the D1 fabric, associated with detachment and the westward movement of the Moravian nappes. © Elsevier, Paris  相似文献   

16.
Hydrolytic weakening in quartz has been extensively demonstrated by experimental deformation of single crystals and aggregates. This paper describes the deformation and recrystallization microstructures and preferred orientations of quartz in a mylonite zone separating granulite facies (0.2% H2O) from amphibolite facies (1.0% H2O) acid gneisses. The transition from slightly deformed country rock on both sides to the ultimate product of mylonitization (a phyllite) is described and the following major differences are noted:
1. (1) The strain prior to recrystallization is higher on the granulite side.
2. (2) Misorientations across deformation-band boundaries are much higher on the granulite side.
3. (3) Subgrains and new grains are considerably smaller at the same stage of recrystallization on the granulite side.
4. (4) Preferred orientation of [0001] developes more rapidly with respect to strain on the amphibolite side.
5. (5) There is a closer orientation relationship between host and recrystallized (new) grains on the granulite side.
The microstructures and preferred-orientation development on both sides are related to concurrent ductile deformation, dynamic recovery and recrystallization processes. The differences between the two sides is attributed to the difference in bulk H2O content of the rocks and a resultant difference in strain rate. The suggested effect of water on recovery processes is favoured over its possible role in slip processes.  相似文献   

17.
Microstructures and quartz c-axis fabrics were analyzed in five quartzite samples collected across the eastern aureole of the Eureka Valley–Joshua Flat–Beer Creek composite pluton. Temperatures of deformation are estimated to be 740±50 °C based on a modified c-axis opening angle thermometer of Kruhl (J. Metamorph. Geol. 16 (1998) 142). In quartzite layers located closest (140 m) to the pluton-wall rock contact, flattened detrital grains are plastically deformed and partially recrystallized. The dominant recrystallization process is subgrain rotation (dislocation creep regime 2 of Hirth and Tullis (J. Struct. Geol. 14 (1992) 145)), although grain boundary migration (dislocation creep regime 3) is also evident. Complete recrystallization occurs in quartzite layers located at a distance of 240 m from the contact, and coincides with recrystallization taking place dominantly through grain boundary migration (regime 3). Within the quartzites, strain is calculated to be lowest in the layers closest to the pluton margin based on the aspect ratios of flattened detrital grains.The c-axis fabrics indicate that a slip operated within the quartzites closest to the pluton-wall rock contact and that with distance from the contact the operative slip systems gradually switch to prism [c] slip. The spatial inversion in microstructures and slip systems (apparent “high temperature” deformation and recrystallization further from the pluton-contact and apparent “low temperature” deformation and recrystallization closer to the pluton-contact) coincides with a change in minor phase mineral content of quartzite samples and also in composition of the surrounding rock units. Marble and calc-silicate assemblages dominate close to the pluton-wall rock contact, whereas mixed quartzite and pelite assemblages are dominant further from the contact.We suggest that a thick marble unit located between the pluton and the quartzite layers acted as a barrier to fluids emanating from the pluton. Decarbonation reactions in marble layers interbedded with the inner aureole quartzites and calc-silicate assemblages in the inner aureole quartzites may have produced high XCO2 (water absent) fluids during deformation. The presence of high XCO2 fluid is inferred from the prograde assemblage of quartz+calcite (and not wollastonite)+diopside±K-feldspar in the inner aureole quartzites. We suggest that it was these “dry” conditions that suppressed prism [c] slip and regime 3 recrystallization in the inner aureole and resulted in a slip and regime 2 recrystallization, which would normally be associated with lower deformation temperatures. In contrast, the prograde assemblage in the pelite-dominated outer part of the aureole is biotite+K-feldspar. These “wet” pelitic assemblages indicate fluids dominated by water in the outer part of the aureole and promoted prism [c] slip and regime 3 recrystallization. Because other variables could also have caused the spatial inversion of c-axis fabrics and recrystallization mechanisms, we briefly review those variables known to cause a transition in slip systems and dislocation creep regimes in quartz. Our conclusions are based on a small number of samples, and therefore, the unusual development of crystal fabrics and microstructures in the aureole to the EJB pluton suggests that further study is needed on the effect of fluid composition on crystal slip system activity and recrystallization mechanisms in naturally deformed rocks.  相似文献   

18.
胡军  余心起  路宗悦  曾严  刘秀  王照翻 《地球科学》2020,45(5):1636-1652
东天山康古尔断裂带和雅满苏断裂带之间石炭纪沉积-火山岩系中发育一条东西向韧性变形带，具两期性质不同的韧性变形，早期韧性挤压性质，晚期右行韧性剪切.对早期韧性挤压变形的宏观构造（糜棱面理、糜棱线理、对称石香肠构造、不对称褶皱等）和显微构造（压力影构造、布丁构造、动态重结晶、不同类型砾石变形特征等）特征做了详细的研究.糜棱岩中砾石有限应变Flinn图解判别岩石类型为L-S和SL型构造岩，三轴应变量的测量均揭示了一般压缩和少部分的平面应变类型.石英亚颗粒旋转重结晶及少量边界迁移重结晶，长石塑性变形、部分膨凸重结晶等变形特征；石英C轴组构揭示中温柱面 < a>和菱面 < a>滑移为主，后期叠加底面 < a>滑移.因此，推测早期韧性挤压变形温度范围在450~550℃.综合区域地质资料，康古尔变形带早期韧性挤压变形形成于300~290 Ma，塔里木板块和中天碰撞闭合后陆内南北挤压环境下.   相似文献   

19.
Syntectonic plutons emplaced in shallow crust often contain intermediate-to low-temperature deformation microstructures but lack a high-temperature, subsolidus deformation fabric, although the relict magmatic fabric is preserved. The Proterozoic Vellaturu granite emplaced at the eastern margin of the northern Nallamalai fold belt, south India during the late phase of regional deformation has a common occurrence of intermediate-to low-temperature deformation fabric, superimposed over magmatic fabric with an internally complex pattern. But high-T subsolidus deformation microstructure and fabric are absent in this pluton. The main crystal plastic deformation and fluid enhanced reaction softening was concentrated along the margin of the granite body. Resulting granite mylonites show Y-maximum c-axis fabric in completely recrystallized quartz ribbonds, dynamic recrystallization of perthites, and myrmekite indicative of fabric development under intermediate temperature (∼ 500–400°C). The weakly-deformed interior shows myrmekite, feldspar microfracturing and limited bulging recrystallization of quartz. The abundance of prism subgrain boundaries is indicative of continuing deformation through low-temperature (∼ 300°C). The relative rates of cooling influenced by advective heat transfer and deformation of the pluton seem to control the overall subsolidus fabric development. The rapid advective heat transfer from the interior in the early stages of subsolidus cooling was followed by slow cooling through intermediate temperature window as a well-developed phyllosilicate rich mylonitic skin around the granite body slowed down conductive heat loss. Low-T crystal plastic deformation of quartz was effected at a late stage of cooling and deformation of the shallow crustal granite body emplaced within the greenschist facies Nallamlai rocks.  相似文献   

20.
Microstructure of mylonites and their descriptive terminology   总被引：1，自引：0，他引：1  
T.H. Bell  M.A. Etheridge 《Lithos》1973,6(4):337-348
The microstructural transition from amphibolite facies, gneissic country rock, with increasing deformation, to a fine-grained phyllitic mylonite is described in detail. All microstructures (e.g. polygonization, subgrains, serrated grain boundaries, kink bands, grain aggregates) are attributed to ductile deformation, recovery and recrystallization processes. The similarity of these structures to other described mylonites suggests that brittle deformation is not widespread in mylonitic rocks, and that terminology with brittle connotations should be discontinued. A new definition for the term ‘mylonite’ is proposed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号