首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract— We have analyzed fluorine and boron in nine tektites from all four strewn fields, and in a suite of impact glasses and target rocks from the Zhamanshin and Darwin impact craters, as well as Libyan Desert Glass and Aouelloul impact glass samples. Fluorine and boron are useful indicators for the volatilization and temperature history of tektites and impact glasses. Tektites from different strewn fields show a limited range of F and B contents and have F/B ratios near unity. Most splash-form tektites have lower average F and B contents than Muong Nong type tektites, which is similar to the relation between irghizites and zhamanshinites. The F and B contents in target rocks from the Zhamanshin and Darwin impact craters are similar to normal terrestrial sediments. Fluorine in impact glasses and tektites is more depleted compared to their (known or inferred) target rocks than is boron, which is caused by the higher volatility of F. The F/B ratios therefore decrease with increasing temperature of formation (suggesting that irghizites were formed at a higher temperature than zhamanshinites, and Muong Nong type tektites at a lower temperature than splash-form tektites). Mixing of local country rocks together with partial loss of the volatiles F and B can reproduce the F and B contents of impact glasses.  相似文献   

2.
The surface structures of irghizites from the Zhamanshin crater in Kazachstan, USSR, play an important role in the discussion of their genesis. These surface structures were compared with those of typical tektites (australites) and pyroclastics (obsidians, lapilli) based on investigation by electron microscope. The results of these investigations indicate that there are no unambiguous genetical relationships between the morphology of irghizites and the surface features of tektites and pyroclastics. The surface shapes of irghizites result from several simultaneous or successive processes, in the course of which globules of different size melted, stuck together and were eaten into by corrosive gases after their solidification. The assumption that the verrucose swellings were caused by expanding gas bubbles immediately below the surface of the glass bulk can be excluded. The verrucose glass globules are identical in chemical composition to the glass bulk of the irghizites.  相似文献   

3.
Abstract— Darwin glass formed about 800,000 years ago in western Tasmania, Australia. Target rocks at Darwin crater are quartzites and slates (Siluro‐Devonian, Eldon Group). Analyses show 2 groups of glass, Average group 1 is composed of: SiO2 (85%), Al2O3 (7.3%), TiO2 (0.05%), FeO (2.2%), MgO (0.9%), and K2O (1.8%). Group 2 has lower average SiO2 (81.1%) and higher average Al2O3 (8.2%). Group 2 is enriched in FeO (+1.5%), MgO (+1.3%) and Ni, Co, and Cr. Average Ni (416 ppm), Co (31 ppm), and Cr (162 ppm) in group 2 are beyond the range of sedimentary rocks. Glass and target rocks have concordant REE patterns (La/Lu = 5.9–10; Eu/Eu* = 0.55–0.65) and overlapping trace element abundances. 87Sr/86Sr ratios for the glasses (0.80778–0.81605) fall in the range (0.76481–1.1212) defined by the rock samples. ε‐Nd results range from –13.57 to –15.86. Nd model ages range from 1.2–1.9 Ga (CHUR) and the glasses (1.2–1.5 Ga) fall within the range defined by the target samples. The 87Sr/86Sr versus 87Rb/86Sr regression age (411 ± 42 Ma) and initial ratio (0.725 ± 0.016), and the initial 43Nd/144Nd ratio (0.51153 ± 000011) and regression age (451 ± 140 Ma) indicate that the glasses have an inherited isotopic signal from the target rocks at Darwin crater. Mixing models using target rock compositions successfully model the glass for all elementsexcept FeO, MgO, Ni, Co, and Cr in group 2. Mixing models using terrestrial ultramafic rocks fail to match the glass compositions and these enrichments may be related to the projectile.  相似文献   

4.
The Thermal Emission Spectrometer (TES) has observed a high-silica material in the dark regions of Mars that is spectrally similar to obsidian glass and may have a volcanic origin. An alternate interpretation is that the spectrally amorphous material consists of clay minerals or some other secondary material, formed by chemical alteration of surface rocks. The regions where this material is observed (e.g., Acidalia Planitia) have relatively high spectral contrast, suggesting that the high-silica material exists as coarse particulates, indurated soils or cements, within rocks, or as indurated coatings on rock surfaces. The geologic interpretation of this spectral result has major implications for understanding magmatic evolution and weathering processes on Mars. One of the complications in interpreting spectral observations of glasses and clay minerals is that both are structurally and compositionally complex. In this study, we perform a detailed spectroscopic analysis of indurated smectite clay minerals and relate their thermal emission spectral features to structural and crystal chemical properties. We examine the spectral similarities and differences between smectite clay minerals and obsidian glass from a structural-chemical perspective, and make further mineralogical interpretations from previous TES results. The results suggest that neither smectite clays nor any clay mineral with similar structural and chemical properties can adequately explain TES observations of high-silica materials in some martian dark regions. If the spectrally amorphous materials observed by TES do represent an alteration product, then these materials are likely to be poorly crystalline aluminosilicates. While all clay minerals have Si/O ratios ?0.4, the position of the emissivity minimum at Mars suggests a Si/O ratio of 0.4-0.5. The spectral observation could be explained by the existence of a silica-rich alteration product, such as Al- or Fe-bearing opal, an intimate physical mixture of relatively pure silica and other aluminosilicates (such as clay minerals or clay precursors), or certain zeolites. The chemical alteration of basaltic rocks on Mars to phyllosilicate-poor, silica-rich alteration products provides a geologically reasonable and consistent explanation for the global TES surface mineralogical results.  相似文献   

5.
Abstract— About 100 cobble-sized samples collected from the surface of the central polymict breccia formation of Haughton impact crater, Canada, have been studied microscopically and chemically. Breccia clasts derived from the 1700 m deep Precambian basement consist of 13 rock types which can be grouped into sillimanite- and garnet-bearing gneiss; alkali feldspar-rich aplitic or biotite-hornblende-bearing gneiss; biotite and hornblende gneiss; apatite-rich biotite and biotite-hornblende gneiss; calcitediopside gneiss; amphibolite; tonalitic orthogneiss; and basalts. The range of chemical compositions of these rocks is wide: e.g., SiO2 ranges from 40–85 wt.%; Al2O3 from 7–20 wt.%; CaO from 0.01–25 wt.%; or P2Os from <0.01–5 wt.%. Nearly all samples of crystalline rocks are shock metamorphosed up to about 60 GPa. Most conspicuous is the absence of whole-rock melts and the very rare occurrence of unshocked rocks. The 45 samples examined can be classified into the following shock stages: stage 0 (<5 GPa): 4.5%, stage Ia (10–20 GPa): 9.0%, stage Ib (20–35 GPa): 33%, stage II (35–45 GPa): 29%, stage III (45–55 GPa): 18%, stage III–IV (55–60 GPa): 6.5%. Among Paleozoic sedimentary rock clasts higher degrees of shock than within crystalline rocks were observed such as highly vesiculated, whole-rock melts of sandstones and shales. Within the northern and eastern sectors of the allochthonous breccia no distinct radial variation of the cobble-sized lithic clasts regarding abundance, rock type, and degree of shock was observed, with the exception that clasts of shock-melted sedimentary rocks and of highly shocked basement rocks (stage III–IV) are strongly concentrated near the center of the crater. Based on our field and laboratory investigations we conclude that vaporization and melting due to the Haughton impact affected the lower section of the sedimentary strata from about 900 to 1700 m depth (Eleanor River limestones and dolomites, Lower Ordovician and Cambrian limestones, dolomites, shales, and sandstones). The 60-GPa shock pressure isobar reached only the uppermost basement rocks so that whole rock melting of the crystalline rocks was not possible.  相似文献   

6.
Abstract— The Obolon impact structure, 18 km in diameter, is situated at the northeastern slope of the Ukrainian Shield near its margin with the Dnieper‐Donets Depression. The crater was formed in crystalline rocks of the Precambrian basement that are overlain by marine Carboniferous and continental Lower Triassic deposits. The post‐impact sediments comprise marine Middle Jurassic (Bajocian and Bathonian) and younger Mesozoic and Cenozoic deposits. Today the impact structure is buried beneath an about 300‐meter‐thick sedimentary rock sequence. Most information on the Obolon structure is derived from two boreholes in the western part of the crater. The lowest part of the section in the deepest borehole is composed by allogenic breccia of crystalline basement rocks overlain by clast‐rich impact melt rocks and suevites. Abundant shock metamorphic effects are planar deformation features (PDFs) in quartz and feldspars, kink bands in biotite, etc. Coesite and impact diamonds were found in clast‐rich impact melt rocks. Crater‐fill deposits are a series of sandstones and breccias with blocks of sedimentary rocks that are covered by a layer of crystalline rock breccia. Crystalline rock breccias, conglomeratic breccias, and sandstones with crystalline rock debris have been found in some boreholes around the Obolon impact structure to a distance of about 50 km from its center. Those deposits are always underlain by Lower Triassic continental red clay and overlain by Middle Jurassic marine clay. The K‐Ar age of impact melt glasses is 169 Ma, which corresponds to the Middle Jurassic (Bajocian) age. The composition of crater‐fill rocks within the crater and sediments outside the Obolon structure testify to its formation under submarine conditions.  相似文献   

7.
Mid-infrared extinction coefficients of five natural amorphous silicates and seven synthetic glasses were measured. Three bands at about 10, 12, and 20 μm were seen for all the measured samples. The quantities of these bands are found to have good correlations with the SiO2 content of the samples. The correlations are the most remarkable for the 10 μm band. As the SiO2 content decreases, the peak wavelengthλ m shifts to longer side, the peak heightK m decreases and the full width of half maximumW increases. A quantityλ m K m W is constant within 15%. Empirical formula $$\lambda_m (\mu m) = {11.10-2.30 x 10^-2} {[SiO_2 wt.\%]} \pm 0.15$$ and $$W(\mu m) = {5.14-4.68 x 10^- 2} {[SiO_2 wt.\%]} \pm 0.30$$ are obtained for the measured samples. Therefore, the correlation is present between the 10 μm peak wavelengthλ m and peak widthW for amorphous silicates. The change in peak widthW is remarkable compared the change in peak wavelengthλ m as the SiO2 content varies. For the 12 μm band the correlations with the SiO2 content are not so good. A tendency that theλ m shifts to the red and theK m lowers as the decreasing SiO2 content are found. For the samples with SiO2 content less than 50% the 12 μm band cannot recognized as the peak. For the 20 μm band, theλ m is almost independent on SiO2 content and theK m lowers with decreasing SiO2 content. The results are compared with the observed 10 μm band of the astronomical objects. A method to estimate the SiO2 content of astronomical grain materials is proposed and 48±8% SiO2 wt.% is found corresponding to the peak wavelength of 9.7 μm and the peak width of 2.5–3.0 μm of typical celestial objects.  相似文献   

8.
Abstract— Four exposures of Chicxulub impact ejecta along the Mexico‐Belize border have been sampled and analyzed for major and trace element abundances. The ejecta deposits consist of a lower spheroid bed, containing clay and dolomite spheroids, and an upper diamictite bed with boulders and clasts of limestone and dolomite. The matrix of both beds is composed of clay and micritic dolomite. The rare earth element (REE) compositions in the matrix of both units show strong similarities in concentrations and pattern. Furthermore, the Zr/TiO2 scatter plot shows a linear correlation indicating one source. These results indicate that the basal spheroid bed has the same source and was generated during the same event as the overlying diamictite bed, which lends support to a single‐impact scenario for the Albion Formation ejecta deposits. The elevated concentrations of non‐meteoritic elements such as Sb, As, U, and Zn in the matrix of the lower spheroid bed are regarded to have been derived from the sedimentary target rocks at the Chicxulub impact site. The positive Eu and Ce anomalies in clay concretion and in the matrix of the lower part of the spheroid bed in Albion Island quarry is probably related to processes involved in the impact, such as high temperature and oxidizing conditions. Analogous trace element anomalies have been reported from the distal Cretaceous‐Paleogene (K/T) boundary clay layer at different sites. Thus, the trace element signals, reported herein, are regarded to support a genetic link between the Chicxulub impact, the ejecta deposits along the Mexico‐Belize border, and the global K/T boundary layer.  相似文献   

9.
Abstract— U-Th-Pb, Rb-Sr, and Sm-Nd isotopic signatures of corroded, but unaltered, black glassy tektites from Cretaceous-Tertiary (K-T) boundary rock on Haiti are not consistent with their derivation from an impact on MOR-derived oceanic crust or continental regions involving middle Proterozoic or older crustal material. Two single-grain and two batches of these tektites yielded present-day ?Nd = ?3.0 to ?3.4, ?Sr = +55 to 56, 206Pb/204Pb = 18.97; 207Pb/204Pb = 15.74; 208Pb/204Pb = 38.91 values, and Pb, Rb, Sr, Sm, and Nd concentrations of ～6, ～45, ～535, ～4.7, and ～22 ppm, respectively. Initial ?Nd and ?Sr values for the tektites are different from time-integrated Nd-Sr isotopic signatures for almost all oceanic crustal types. Age-corrected Pb isotopic values are similar to those for pelagic sediments with distinctly higher 207Pb/204Pb values compared to MORB. However, these results do not exclude the possibility of an oceanic impact site, if the tektites were derived from fine-grained sediments that typically overlie such regions, although other mineralogic and chemical evidence from K-T boundary debris suggests otherwise. Moreover, the Nd average crustal residence age of ～ 1080 Ma (TDM) for the black tektites eliminates impact sites on continental crustal regions involving middle Proterozoic or older rocks, or sedimentary rocks largely derived from them. Previously reported major and trace element data from the black tektites suggest that the source material was possibly sedimentary with a composition similar to average shale or graywacke. If this is the case, then the Nd isotopic data suggest that the source rocks were not older than Silurian (TCHUR = 400 Ma) in age, and were composed largely of young (< 1080 Ma) crustal material. Of the suspected K-T boundary impact sites, both the Manson (Iowa) and Chicxulub (Yucatan) structures occur in suitable lithologies to yield the Haitian black tektites, although neither structure has as yet proven to be the tektite source.  相似文献   

10.
Abstract— t‐Impact‐generated glasses from fallout suevite deposits at the Ries impact structure have been investigated using analytical scanning electron microscopy. Approximately 320 analyses of glass clasts were obtained. Four glass types are distinguished on the basis of composition and microtextures. Type 1 glasses correspond to the aerodynamically shaped glass bombs studied previously by many workers. Major oxide concentrations indicate the involvement of granitic rocks, amphibolites, and minor Al‐rich gneisses during melting. Type 2 glasses are chemically heterogeneous, even within individual clasts, with variations of several wt% in most of the major oxides (e.g., 57–70 wt% SiO2). This suggests incomplete mixing of: 1) mineral‐derived melts or 2) whole rock melts from a wide range of lithologies. Aluminium‐rich clinopyroxene and Fe‐Mg‐rich plagioclase quench crystals are present in type 1 and 2 glasses, respectively. Type 3 glasses contain substantial amounts of H2O (?12–17 wt%), low SiO2 (50–53 wt%), high Al2O3 (17–21 wt%), and high CaO (5–7 wt%) contents. This suggests an origin due to shock melting of part of the sedimentary cover. Type 4 glasses form a ubiquitous component of the suevites. Based on their high SiO2 content (?85–100 wt%), the only possible protolith are sandstones in the lowermost part of the sedimentary succession. Calcite forms globules within type 1 glasses, with which it develops microtextures indicative of liquid immiscibility. Unequivocal evidence also exists for liquid immiscibility between what are now montmorillonite globules and type 1, 2, and 4 glasses, indicating that montmorillonite was originally an impact melt glass. Clearly, the melt zone at the Ries must have incorporated a substantial fraction of the sedimentary cover, as well as the underlying crystalline basement rocks. Impact melts were derived from different target lithologies and these separate disaggregated melts did not substantially mix in most cases (type 2, 3, and 4 glasses and carbonate melts).  相似文献   

11.
Abstract— The Chesapeake Bay impact structure, which is about 35 Ma old, has previously been proposed as the possible source crater of the North American tektites (NAT). Here we report major and trace element data as well as the first Sr‐Nd isotope data for drill core and outcrop samples of target lithologies, crater fill breccias, and post‐impact sediments of the Chesapeake Bay impact structure. The unconsolidated sediments, Cretaceous to middle Eocene in age, have ?Srt = 35.7 Ma of +54 to +272, and ?Ndt = 35.7 Ma ranging from ?6.5 to ?10.8; one sample from the granitic basement with a TNdCHUR model age of 1.36 Ga yielded an ?Srt = 35.7 Ma of +188 and an ?Ndt = 35.7 Ma of ?5.7. The Exmore breccia (crater fill) can be explained as a mix of the measured target sediments and the granite, plus an as‐yet undetermined component. The post‐impact sediments of the Chickahominy formation have slightly higher TNdCHUR model ages of about 1.55 Ga, indicating a contribution of some older materials. Newly analyzed bediasites have the following isotope parameters: +104 to +119 (?Srt = 35.7 Ma), ?5.7 (?Ndt = 35.7 Ma), 0.47 Ga (TSrUR), and 1.15 Ga (TNdCHUR), which is in excellent agreement with previously published data for samples of the NAT strewn field. Target rocks with highly radiogenic Sr isotopic composition, as required for explaining the isotopic characteristics of Deep Sea Drilling Project (DSDP) site 612 tektites, were not among the analyzed sample suite. Based on the new isotope data, we exclude any relation between the NA tektites and the Popigai impact crater, although they have identical ages within 2s? errors. The Chesapeake Bay structure, however, is now clearly constrained as the source crater for the North American tektites, although the present data set obviously does not include all target lithologies that have contributed to the composition of the tektites.  相似文献   

12.
Abstract— We investigated the ballistically dispersed melts from Meteor Crater, Arizona, USA to determine the stratigraphic extent of its melt zone from the compositional relationship of melts and target rocks. Most melt particles are crystallized, hydrated, and oxidized; pristine glasses are rare. Hydration and oxidation occurred at ambient temperatures long after the impact. The preserved glasses are generally clear and texturally homogeneous, but unlike typical impact melts, they have unusually heterogeneous compositions, both within individual particles and from sample to sample. For example, the average SiO2 for individual particles ranges from 43 to 65%. The projectile content is unusually high and it is distributed bimodally, with specific samples containing either 5–10% or 20–30% FeO. These compositional heterogeneities most likely reflect the high carbonate content of the target rocks and the release of copious CO2 that dispersed the melts, thereby terminating melt flow and mixing. The high projectile content and the CO2 depleted residue of purely sedimentary rocks produced mafic melts that crystallized fine‐grained olivine and pyroxene. The melts fall into three compositional groups reflecting variable proportions of the major target formations, Moenkopi, Kaibab, and Coconino. Least‐square mixing calculations revealed one group to contain 55% Moenkopi, 40% quartz‐rich, upper Kaibab, and 5% meteorite, suggesting a source depth of <30 m from the pre‐impact surface. The other two melt groups have higher contents of meteorite (15–20%) and Kaibab (50–70%) and contain more SiO2 than average Kaibab. The additional quartz may have been derived from Coconino or the upper Kaibab, implying melt depths >90 m or <30 m, respectively. Additional studies, especially hydrocode calculations, are needed to better understand the source depth of these melts and their exceptionally high projectile content.  相似文献   

13.
Infrared spectra obtained from the Mariner 9 spacecraft during the 1971–1972 dust storm are used to derive information on the composition and particle size distribution of the dust and to study the time evolution of the storm. The dust is not composed of pure granite, basalt, basaltic glass, obsidian, quartz, andesite, or montmorillonite. The infrared spectra suggest that the dust is a mixture of materials, dominated by igneous silicates with >62;60% SiO2, or weathering products such as clay minerals, but the dust could possibly have a significant component of lower SiO2 materials such as basalt. Substantial quantities of carbonates, nitrates, or carbon suboxide are excluded from the mixture. All infrared, visible, and ultraviolet data on the Martian surface composition seem consistent with a mixture of basalt and clay minerals or high SiO2 igneous rocks, with a surface patina of oxides of iron. For all candidate compositions, the data are best matched with a size distribution that approximates a differential power law function of slope ?4. This size distribution is quite similar to terrestial size distributions in regions remote from sources of dust. The relative abundance of particles between 1- and 10-μm radius did not change during the Mariner 9 mission; thus suspended particles did not experience Stokes-Cunningham fallout but instead were supported by turbulence with an eddy diffusion coefficient, Ke ? 7 × 106cm2sec?1. The aerosol optical depth, standardized to 0.3-μm wavelength, varied from about 1.5 early in the mission to about 0.2 at Orbit 200.  相似文献   

14.
Mineral inclusions have been recovered from 11 Muong Nong-type indochinites by heavy liquid separation of crushed and sieved (74–149 μm) specimens. The mineral inclusions were identified by x-ray diffraction analysis and energy dispersive x-ray analysis. The phases identified include zircon, Al2SiO5 (corundum plus SiO2), rutile, chromite and quartz. In addition, cristobalite and tridymite were apparently associated with some of the quartz grains. The inclusions were all silt size and size sorted according to specific gravity. All the inclusions showed evidence of various degrees of shock metamorphism (e.g. fracturing, droplet formation, x-ray asterism). The mineral assemblage indicates a sedimentary source material. Thus it appears that the Muong Nong-type indochinites were formed by shock melting of a well-sorted, silt-size, sedimentary material.  相似文献   

15.
Hyperspectral imaging can be used to rapidly identify and map the spatial distributions of many minerals. Here, hyperspectral mapping in three wavelength regions (visible and near‐infrared, shortwave infrared, and thermal infrared) was applied to drill cores (ST001, ST002, and ST003) penetrating a continuous sequence of crater‐fill breccias from the Steen River impact structure in Alberta, Canada. The combined data sets reveal distinct mineralogical layering, with breccias derived predominantly from sedimentary rocks overlying those derived from granitic basement. This stratigraphy demonstrates that the breccias were not appreciably disturbed following deposition, which is inconsistent with formation models of similar breccias (suevites) by explosive impact melt–fluid interaction. At Steen River, volatiles from sedimentary target rocks were an inherent part of forming these enigmatic breccias. Approximately three quarters of terrestrial impact structures contain sedimentary target rocks; therefore, the role of volatiles in producing so‐called suevitic breccias may be more widespread than previously realized. The hyperspectral maps, specifically within the SWIR wavelength region, also delineate minerals associated with postimpact hydrothermal activity, including ammoniated clay and feldspar minerals not detectable using traditional techniques. These nitrogen‐bearing minerals may have originated from microbial processes, associated with oil‐ and gas‐producing units in the crater vicinity. Such minerals may have important implications for the production of habitable environments by impact‐induced hydrothermal activity on Earth and Mars.  相似文献   

16.
Abstract— Martian meteorites (MMs) have been launched from an estimated 5–9 sites on Mars within the last 20 Myr. Some 80–89% of these launch sites sampled igneous rock formations from only the last 29% of Martian time. We hypothesize that this imbalance arises not merely from poor statistics, but because the launch processes are dominated by two main phenomena: first, much of the older Martian surface is inefficient in launching rocks during impacts, and second, the volumetrically enormous reservoir of original cumulate crust enhances launch probability for 4.5 Gyr old rocks. There are four lines of evidence for the first point, not all of equal strength. First, impact theory implies that MM launch is favored by surface exposures of near‐surface coherent rock (≤102 m deep), whereas Noachian surfaces generally should have ≥102 m of loose or weakly cemented regolith with high ice content, reducing efficiency of rock launch. Second, similarly, both Mars Exploration Rovers found sedimentary strata, 1–2 orders of magnitude weaker than Martian igneous rocks, favoring low launch efficiency among some fluvial‐derived Hesperian and Noachian rocks. Even if launched, such rocks may be unrecognized as meteorites on Earth. Third, statistics of MM formation age versus cosmic‐ray exposure (CRE) age weakly suggest that older surfaces may need larger, deeper craters to launch rocks. Fourth, in direct confirmation, one of us (N. G. B.) has found that older surfaces need larger craters to produce secondary impact crater fields (cf. Barlow and Block 2004). In a survey of 200 craters, the smallest Noachian, Hesperian, and Amazonian craters with prominent fields of secondaries have diameters of ?45 km, ?19 km, and ?10 km, respectively. Because 40% of Mars is Noachian, and 74% is either Noachian or Hesperian, the subsurface geologic characteristics of the older areas probably affect statistics of recognized MMs and production rates of secondary crater populations, and the MM and secondary crater statistics may give us clues to those properties.  相似文献   

17.
Abstract— The osmium isotope ratios and platinum‐group element (PGE) concentrations of impact‐melt rocks in the Chesapeake Bay impact structure were determined. The impact‐melt rocks come from the cored part of a lower‐crater section of suevitic crystalline‐clast breccia in an 823 m scientific test hole over the central uplift at Cape Charles, Virginia. The 187Os/188Os ratios of impact‐melt rocks range from 0.151 to 0.518. The rhenium and platinum‐group element (PGE) concentrations of these rocks are 30–270x higher than concentrations in basement gneiss, and together with the osmium isotopes indicate a substantial meteoritic component in some impact‐melt rocks. Because the PGE abundances in the impact‐melt rocks are dominated by the target materials, interelemental ratios of the impact‐melt rocks are highly variable and nonchondritic. The chemical nature of the projectile for the Chesapeake Bay impact structure cannot be constrained at this time. Model mixing calculations between chondritic and crustal components suggest that most impact‐melt rocks include a bulk meteoritic component of 0.01–0.1% by mass. Several impact‐melt rocks with lowest initial 187Os/188Os ratios and the highest osmium concentrations could have been produced by additions of 0.1%–0.2% of a meteoritic component. In these samples, as much as 70% of the total Os may be of meteoritic origin. At the calculated proportions of a meteoritic component (0.01–0.1% by mass), no mixtures of the investigated target rocks and sediments can reproduce the observed PGE abundances of the impact‐melt rocks, suggesting that other PGE enrichment processes operated along with the meteoritic contamination. Possible explanations are 1) participation of unsampled target materials with high PGE abundances in the impact‐melt rocks, and 2) variable fractionations of PGE during syn‐ to post‐impact events.  相似文献   

18.
Abstract— The Kärdla crater is a 4 km‐wide impact structure of Late Ordovician age located on Hiiumaa Island, Estonia. The 455 Ma‐old buried crater was formed in shallow seawater in Precambrian crystalline target rocks that were covered with sedimentary rocks. Basement and breccia samples from 13 drill cores were studied mineralogically, petrographically, and geochemically. Geochemical analyses of major and trace elements were performed on 90 samples from allochthonous breccias, sub‐crater and surrounding basement rocks. The breccia units do not include any melt rocks or suevites. The remarkably poorly mixed sedimentary and crystalline rocks were deposited separately within the allochthonous breccia suites of the crater. The most intensely shockmetamorphosed allochthonous granitoid crystalline‐derived breccia layers contain planar deformation features (PDFs) in quartz, indicating shock pressures of 20–35 GPa. An apparent K‐enrichment and Ca‐Na‐depletion of feldspar‐ and hornblende‐bearing rocks in the allochthonous breccia units and sub‐crater basement is interpreted to be the result of early stage alteration in an impact‐induced hydrothermal system. The chemical composition of the breccias shows no definite sign of an extraterrestrial contamination. By modeling of the different breccia units with HMX‐mixing, the indigenous component was determined. From the abundances of the siderophile elements (Cr, Co, Ni, Ir, and Au) in the breccia samples, no unambiguous evidence for the incorporation of a meteoritic component above about 0.1 wt% chondrite‐equivalent was found.  相似文献   

19.
  相似文献   

20.
Abar al' Uj (AaU) 012 is a clast‐rich, vesicular impact‐melt (IM) breccia, composed of lithic and mineral clasts set in a very fine‐grained and well‐crystallized matrix. It is a typical feldspathic lunar meteorite, most likely originating from the lunar farside. Bulk composition (31.0 wt% Al2O3, 3.85 wt% FeO) is close to the mean of feldspathic lunar meteorites and Apollo FAN‐suite rocks. The low concentration of incompatible trace elements (0.39 ppm Th, 0.13 ppm U) reflects the absence of a significant KREEP component. Plagioclase is highly anorthitic with a mean of An96.9Ab3.0Or0.1. Bulk rock Mg# is 63 and molar FeO/MnO is 76. The terrestrial age of the meteorite is 33.4 ± 5.2 kyr. AaU 012 contains a ~1.4 × 1.5 mm2 exotic clast different from the lithic clast population which is dominated by clasts of anorthosite breccias. Bulk composition and presence of relatively large vesicles indicate that the clast was most probably formed by an impact into a precursor having nonmare igneous origin most likely related to the rare alkali‐suite rocks. The IM clast is mainly composed of clinopyroxenes, contains a significant amount of cristobalite (9.0 vol%), and has a microcrystalline mesostasis. Although the clast shows similarities in texture and modal mineral abundances with some Apollo pigeonite basalts, it has lower FeO and higher SiO2 than any mare basalt. It also has higher FeO and lower Al2O3 than rocks from the FAN‐ or Mg‐suite. Its lower Mg# (59) compared to Mg‐suite rocks also excludes a relationship with these types of lunar material.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号