首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Conditions for the arrest of a vertical propagating dyke   总被引：1，自引：0，他引：1  
Magma ascent towards the Earth’s surface occurs through dyke propagation in the vast majority of cases. We investigate two purely mechanical effects unrelated to cooling or solidification that lead to the arrest of propagation, so that no eruption occurs. The first is that the input of magma from the source is not maintained continuously, such that a fixed volume of magma is released. Laboratory experiments show that, in this case, the dyke stops at a finite distance from the source. This behaviour is specific to the fracturing process in 3-D. We derive a relationship for the minimum magma volume required for an eruption as a function of magma buoyancy and source depth. When large magma volumes are available, eruption may also be prevented by a thick low density layer in the upper crust. Numerical studies of dyke propagation show that the dyke continues to rise even though it is negatively buoyant. Magma accumulates in a swollen nose region at the interface between the low density layer and the dense basement. Magma overpressure is largest at this interface and increases with increasing penetration into the upper layer. It may become large enough to induce horizontal fractures in the dyke walls and lateral intrusion of a sill, which prevents eruption. This requires that the thickness of the low density layer exceeds a threshold value that depends on the density contrast between magma and host rock. If the magma volume is smaller than a threshold value, neither sill intrusion nor eruption are possible and magma gets stored in a horizontal blade-shaped dyke straddling the interface. Scaling laws for variations of ascent rate and for the minimum magma volume allow diagnosis of a failed eruption.  相似文献   

2.
The liquid being sampled from a draining reservoir of density-stratified fluid, such as an erupting zoned magma chamber, is derived from a relatively thin withdrawal layer adjacent to the level of the chamber outlet. This is a consequence of the buoyancy force associated with the density gradient inhibiting vertical motion so that the opportunity for widely separated density levels (compositions) to be tapped and mingled syneruptively is suppressed.Density gradients in zoned chambers of 0.02 – 10 kgm−3/m are suggested by data from caldera-forming eruptions. Viscosity gradients can be specified for a given density gradient using calculated relationships between viscosity and density. Published compositional and geothermometric data are used to show that zoned high-silica rhyolites decrease in viscosity upward because of the roofward concentration of dissolved volatiles. Other zoned calc-alkaline magmas increase in viscosity upward because of decreasing temperature and concentration of network modifying cations.A method is developed of calculating the scale of the withdrawal layer thickness, δ, for given kinematic viscosity, eruption rate, and density and viscosity gradients. The method is systematized by the identification of specific flow regimes describing the action of either viscous or inertial forces in balancing the buoyancy force. Thin withdrawal layers are favoured by small eruption rates, small viscosity, and by large density gradients. For particularly steep density gradients, however, the consequently large viscosity gradient plays a role in determining the withdrawal layer thickness. Withdrawal layer thicknesses of the order of 100 m are calculated for typical pyroclastic eruptions of zoned acid magma, and are mostly independent of the viscosity gradient.The vertical scale at which a zoned chamber is instantaneously being tapped during an eruption is equal to the scale of the withdrawal layer thickness. Thus, an eruption that causes collapse of a caldera block through a height that is less than that of the withdrawal layer scale will produce magmas from deeper levels than that to which the chamber roof sinks. In this case the eruption is said to oversample the chamber with respect to the amount of caldera collapse and will produce an essentially constant range of compositions throughout. Alternatively, if the caldera collapse distance is much greater than δ then the selective withdrawal process leads to successive levels of the chamber being “skimmed off” (on a scale δ). This allows the compositional stratigraphy of the chamber to be inverted by the eruptive process, with little opportunity for syneruptive mixing between diverse magma compositions. The geological record shows that most calderas associated with zoned magmas collapsed through vertical distances in excess of 100 m (the characteristic estimate for δ) and, in agreement with our modelling of selective withdrawal, show smooth correlations between composition, or temperature, and the order of eruption.  相似文献   

3.
New Sr and Nd isotope data for whole rocks, glasses and minerals are combined to reconstruct the nature and origin of mixing end-members of the 200 km3 trachytic to phonolitic Campanian Ignimbrite (Campi Flegrei, Italy) magmatic system. The least-evolved magmatic end-member shows equilibrium between host glass and the majority of the phenocrysts and is less radiogenic in Sr and Nd than the most-evolved magma. On the contrary, only the Fe-rich pyroxene from the most-evolved erupted magma is in equilibrium with the matrix glass, while all other minerals are in isotopic disequilibrium. These magmas mixed prior to and during the Campanian Ignimbrite eruption and minerals were freely exchanged between the magma batches. Combining the results of the geochemical investigations on magma end-members with geophysical and geological data, we develop the following scenario. In stage 1, a parental, less differentiated magma rose into the middle crust, and evolved through combined crustal assimilation and crystal fractionation. In stage 2, the differentiated magma rose to shallower depth, fed the pre-Campanian Ignimbrite activity and evolved by further open-system processes into the most-evolved and most-radiogenic Campanian Ignimbrite end-member magma. In stage 3, new trachytic magma, isotopically distinct from the pre-Campanian Ignimbrite magmas, rose from ca. 6 km to shallower depth, recharged the most-evolved pre-Campanian Ignimbrite magma chamber, and formed the large and stratified Campanian Ignimbrite magmatic system. During the course of the Campanian Ignimbrite eruption, the two layers were tapped separately and/or simultaneously, and gave rise to the range of chemical and isotopic values displayed by the Campanian Ignimbrite pumices, glasses and minerals.  相似文献   

4.
A core drilled within the northern part of the city of Napoli has offered the unique opportunity to observe in one single sequence the superposition of the four pyroclastic flow units emplaced during the Campanian Ignimbrite (CI) eruption. Such a stratigraphic succession has never been encountered before in natural or in man made exposures. Therefore the CI sequence was reconstructed only on the basis of stratigraphic correlations and compositional data (in literature). The occurrence of four superposed CI flows, together with all the data available (in literature) allowed us to better constrain the chemical stratigraphy of the deposit and the compositional structure of the CI magma chamber. The CI magma chamber includes two cogenetic magma layers, separated by a compositional gap. The upper magma layer was contaminated by interaction with radiogenic fluids. The two magma layers were extruded either individually or simultaneously during the course of the eruption. In the latter case they produced a hybrid magma. But no evidence of input of new geochemically and isotopically distinct magma batches just prior or during the eruption has been found. Comparison with the exposed CI deposits has permitted reconstruction of variable eruption phases and related magma withdrawal and caldera collapse episodes. The eruption was likely to have began with phreatomagmatic explosions followed by the formation of a sustained plinian eruption column fed by the simultaneous extraction from both magma layers. Towards the end of this phase the upward migration of the fragmentation surface and the decrease in magma eruption rate and/or activation of fractures formed an unstable pulsating column that was fed only by the most-evolved magma layer. This plinian phase was followed by the collapse of the eruption column and the beginning of caldera formation. At this stage expanded pyroclastic flows fed by the upper magma layer in the chamber generated. During the following major caldera collapse episode, the maximum mass discharge rate was reached and both magma layers were tapped, generating expanded pyroclastic flows. Towards the end of the eruption, only the deeper and less differentiated magma layer was tapped producing more concentrated pyroclastic flows that traveled short distances.  相似文献   

5.
The influence of magma expansion due to volatile exsolution and gas dilation on dyke propagation is studied using a new numerical code. Many natural magmas contain sufficient amounts of volatiles for fragmentation to occur well below Earth's surface. Magma fragmentation has been studied for volcanic flows through open conduits but it should also occur within dykes that rise towards Earth's surface. The characteristics of volatile-rich magma flow within a hydraulic fracture are studied numerically. The mixture of melt and gas is treated as a compressible viscous fluid below the fragmentation level and as a gas phase carrying melt droplets above it. The numerical code solves for elastic deformation of host rocks, the flow of the magmatic mixture and fracturing at the dyke tip. With volatile-free magma, a dyke fed at a constant rate in a uniform medium adopts a constant shape and width and rises at a constant velocity. With volatiles involved, magma expands and hence the volume flux of magma increases. With no fragmentation, this enhanced flux leads to acceleration and thinning of the dyke. Simple scaling laws allow accurate predictions of dyke width and ascent rate for a wide range of conditions. With fragmentation, dyke behaviour is markedly different. Due to the sharp drop of head loss that occurs in gas-rich fragmented material, large internal overpressures develop below the dyke tip and induce swelling of the nose region, leading to deceleration of the dyke. These results are applied to the two-month long period of volcanic unrest that preceded the May 1980 eruption of Mount St Helens. An initial phase of rapid earthquake migration from the 7–8 km deep reservoir to shallow levels was followed by very slow progression of magma within the edifice. Such behaviour can be accounted for by magma fragmentation at the top of a dyke.  相似文献   

6.
Seismological observations provided consistent information on the course and mechanism of the complicated large fissure eruption at Tolbachik volcano in Kamchatka from July 6, 1975 to December 10, 1976. Seismicity indicates that the initial magnesian basalts were rising ten days before the eruption from depths of more than 20 km. The formation of new feeding dykes was accompanied by earthquake swarms which decreased sharply one to two days before the opening of new eruptive fissures. The seismological data indicate that the main source of the different erupted basalts (2 km3) was a vast system (diameter ca. 80 km) of hydraulically connected magma chambers located in the lower crustal layers or in the crust-mantle transition layer.  相似文献   

7.
This petrologic analysis of the Negra Muerta Volcanic Complex (NMVC) contributes to understanding the magmatic evolution of eruptive centres associated with prominent NW-striking fault zones in the southern Central Andes. Specifically, the geochemical characteristics and magmatic evolution of the two eruptive episodes of this Complex are analysed. The first one occurred as an explosive eruption at 9 Ma and is represented by a strongly welded, fiamme-rich, andesitic to dacitic ignimbrite deposit. The second commenced with an eruption of a rhyolitic ignimbrite at 7.6 Ma followed by effusive discharge of hybrid lavas at 7.3 Ma and by emplacement of andesitic to rhyodacitic dykes and domes. Both explosive and effusive eruptions of the second episode occurred within a short time span, but geochemical interpretations permit consideration of the existence of different magmas interacting in the same magma chamber. Our model involves an andesitic recharge into a partially cooled rhyolitic magma chamber, pressurising the magmatic system and triggering explosive eruption of rhyolitic magma. Chemical or mechanical evidence for interaction between the rhyolitic and andesitic magma in the initial stages are not obvious because of their difference in composition, which could have been strong enough to inhibit the interaction between the two magmas. After the initial explosive stages of the eruption at 7.6 Ma, the magma chamber become more depressurised and the most mafic magma settled in compositional layers by fractional crystallisation. Restricted hybridisation occurred and was effective between adjacent and thermally equivalent layers close to the top of the magma chamber. At 7.3 Ma, increments of caldera formation were accompanied by effusive discharge of hybrid lavas through radially disposed dykes whereby andesitic magma gained in importance toward the end of this effusive episode in the central portion of the caldera. Assimilation during turbulent ascent (ATA) is invoked to explain a conspicuous reversed isotopic signature (87Sr/86Sr and 143Nd/144Nd) in the entire volcanic series. Therefore, the 7.6 to 7.3 Ma volcanic rocks of the NMVC resulted from synchronous and mutually interacting petrological processes such as recharge, fractional crystallization, hybridisation, and Assimilation during Turbulent Ascent (ATA).Geochemical characteristics of both volcanic episodes show diverse type and/or depth in the sources and variable influence of upper crustal processes, and indicate a recurrence in the magma-forming conditions. Similarly, other minor volcanic centres in the transversal volcanic belts of the Central Andes repeated their geochemical signatures throughout the Miocene.  相似文献   

8.
In volcanic areas occurring in zones of extension, basaltic magma rises up to the surface, through fissures, to form dykes which in depth are connected with one or several magmatic chambers located in the crust or the upper mantle. Starting form this geological situation, we propose models of increasing complexity to study cooling by heat conduction of a system composed of parallel dykes and underlying magmatic chamber. This work has been carried out 1) by numerical methods which take into account the variation with temperature of the thermic parameters and 2) by using an analytical solution of the Fourier equation (an initial fictive temperature is then calculated). The thermic individuality of the dykes disappears quickly and the dyke system may be replaced by a single « intrusion » which cools slowly from a temperature = =2/β θ0 much lower than θ0 (θ0=initial temperature; 1/β=injection density). The temperature gradient due to the dyke system has been estimated for different time intervals after the intrusion. For the calculation of the thermal effect of a magmatic chamber, we have taken into account its size, depth and age. Numerical application for appropriate geological cases have been carried out and allow one to estimate the respective effects of dykes and magma chamber.  相似文献   

9.
Systematic analyses of the major-element chemistry of products of several eruptions during syn-and post-caldera stages of Izu-Oshima volcano were compiled. Comparisons of the products of large-scale eruptions in 1338?, 1421? and 1777–1778, of intermediate-scale eruptions in 1950–1951 and 1986, and of small-scale eruptions in 1954, 1964 and 1974 clearly show the existence of two types of magmas. One is “plagioclase-controlled” and the other is “differentiated” magma (multimineral-controlled); i.e. the bulk chemistry of the first magma type is controlled by plagioclase addition or removal, while that of the second type is controlled by fractionation of plagioclase, orthopyroxene, clinopyroxene, and titanomagnetite. Eruptions of Izu-Oshima volcano have occurred at the summit and along the flanks. Summit eruptions tap only plagioclase-controlled magmas, while flank eruptions supply both magma types. It is considered unlikely that both magma types would coexist in the same magma chamber based on the petrology. In the case of the 1986 eruption, the flank magma was isolated sometime in the past from the summit magma chamber or central conduit, and formed small magma pockets, where further differentiation occurred due to relatively rapid cooling. In a period of quiescence prior to the 1986 eruption, new magma was supplied to the summit magma chamber, and the summit eruption began. The dike intrusion or fracturing around the small magma pockets triggered the flank eruption of the differentiated magma. This model can be applied to the large-scale flank eruption in 1338(?) which erupted differentiated magmas. In 1421(?), the flank eruption tapped plagioclase-controlled magma. In this case, the isolated magmas from the summit magma chamber directly penetrated the flank without differentiation.  相似文献   

10.
Flood basalts, such as the Deccan Traps of India, represent huge, typically fissure-fed volcanic provinces. We discuss the structural attributes and emplacement mechanics of a large, linear, tholeiitic dyke swarm exposed in the Nandurbar–Dhule area of the Deccan province. The swarm contains 210 dykes of dolerite and basalt >1 km in length, exposed over an area of 14,500 km2. The dykes intrude an exclusively basaltic lava pile, largely composed of highly weathered and zeolitized compound pahoehoe flows. The dykes range in length from <1 km to 79 km, and in thickness from 3 to 62 m. Almost all dykes are vertical, with the others nearly so. They show a strong preferred orientation, with a mean strike of N88°. Because they are not emplaced along faults or fractures, they indicate the regional minimum horizontal compressive stress (σ 3) to have been aligned ~N–S during swarm emplacement. The dykes have a negative power law length distribution but an irregular thickness distribution; the latter is uncommon among the other dyke swarms described worldwide. Dyke length is not correlated with dyke width. Using the aspect ratios (length/thickness) of several dykes, we calculate magmatic overpressures required for dyke emplacement, and depths to source magma chambers that are consistent with results of previous petrological and gravity modelling. The anomalously high source depths calculated for a few dykes may be an artifact of underestimated aspect ratios due to incomplete along-strike exposure. However, thermal erosion is a mechanism that can also explain this. Whereas several of the Nandurbar–Dhule dykes may be vertically injected dykes from shallow magma chambers, others, particularly the long ones, must have been formed by lateral injection from such chambers. The larger dykes could well have fed substantial (≥1,000 km3) and quickly emplaced (a few years) flood basalt lava flows. This work highlights some interesting and significant similarities, and contrasts, between the Nandurbar–Dhule dyke swarm and regional tholeiitic dyke swarms in Iceland, Sudan, and elsewhere. Editorial responsibility: J. White  相似文献   

11.
Previous laboratory experiments investigating the fluid dynamics of replenished magma chambers have been extended to model effects resulting from the release of gas. Turbulent transfer of heat between a layer of dense, hot and volatile-rich mafic magma overlying cooler more evolved magma can lead to crystallization and exsolution of volatiles in the lower layer. Small gas bubbles can cause the bulk density to decrease to that of the upper layer and thus produce sudden overturning and initiate mixing, followed by further exsolution of gas and explosive eruption. These processes have been modelled in the laboratory using a chemical reaction between sodium or potassium carbonate and nitric acid to release small bubbles of CO2. We have investigated both the initial overturning produced by gas release in the lower layer, and the subsequent evolution of gas due to intimate mixing of the two layers. The latter experiments, in which the reactants remained isolated in the two layers until overturning occurred, demonstrated unambiguously that the fluxes of chemical components across the interfaces between convecting layers are very slow compared to the flux of heat. This shows that the evolution of layers of magma of different origins and composition can take place nearly independently of each other. The magmas can coexist in the same stratified chamber, until their bulk densities become equal and they mix together. The processes illustrated in these experiments could occur in H2O-bearing magmas such as in the calcalkaline association and in CO2-bearing mafic magmas such as in silica undersaturated suites.  相似文献   

12.
Emplacement and arrest of sheets and dykes in central volcanoes   总被引：1，自引：0，他引：1  
Sheet intrusions are of two main types: local inclined (cone) sheets and regional dykes. In Iceland, the inclined sheets form dense swarms of (mostly) basaltic, 0.5–1 m thick sheets, dipping either at 20–50° or at 75–90° towards the central volcano to which they belong. The regional dykes are (mostly) basaltic, 4–6 m thick, subvertical, subparallel and form swarms, less dense than those of the sheets but tens of kilometres long, in the parts of the volcanic systems that are outside the central volcanoes. In both types of swarms, the intrusion intensity decreases with altitude in the lava pile. Theoretical models generally indicate very high crack-tip stresses for propagating dykes and sheets. Nevertheless, most of these intrusions become arrested at various crustal depths and never reach the surface to supply magma to volcanic eruptions. Two principal mechanisms are proposed to explain arrest of dykes and sheets. One is the generation of stress barriers, that is, layers with local stresses unfavourable for the intrusion propagation. The other is mechanical anisotropy whereby sheet intrusions become arrested at discontinuities. Stress barriers may develop in several ways. First, analytical solutions for a homogeneous and isotropic crust show that the intensity of the tensile stress associated with a pressured magma chamber falls off rapidly with distance from the chamber. Thus, while dyke and sheet injection in the vicinity of a chamber may be favoured, dyke and sheet arrest is encouraged in layers (stress barriers) at a certain distance from the chamber. Second, boundary-element models for magma chambers in a mechanically layered crust indicate abrupt changes in tensile stresses between layers of contrasting Young’s moduli (stiffnesses). Thus, where soft pyroclastic layers alternate with stiff lava flows, as in many volcanoes, sheet and dyke arrest is encouraged. Abrupt changes in stiffness between layers are commonly associated with weak and partly open contacts and other discontinuities. It follows that stress barriers and discontinuities commonly operate together as mechanisms of dyke and sheet arrest in central volcanoes.  相似文献   

13.
Dykes are the principal channels through which magma reaches the surface in volcanic eruptions. For this reason dykes observed in the field are commonly assumed to be feeders to lava flows. The actual proportion of dykes reaching the surface is, however, poorly known. In order to develop models for the purpose of estimating volcanic hazard, this proportion must be known. This follows because such models should not only consider the probability of dykes being injected from magma chambers during periods of unrest in the associated volcanoes, but also the probability of the injected dykes being arrested. This paper presents field data on several thousand dykes from Iceland and Tenerife (Canary Islands) indicating that many, and probably most, dykes become arrested at various crustal levels and never reach the surface to feed eruptions. Using the results of analytical and numerical models, it is shown that, for common loading conditions, the stress field in the vicinity of a magma chamber may favour the injection and propagation of dykes while the stress field at a certain distance from the chamber favours dyke arrest. This means that many dykes that are injected from the chamber propagate only for a very limited distance from the chamber to the point where they become arrested. The implication is that during periods of unrest in volcanoes, the probability of volcanic eruption is only a small fraction of the probability of dyke injection from the source magma chamber.  相似文献   

14.
The six eruption episodes of the 10 ka Pahoka–Mangamate (PM) sequence (see companion paper) occurred over a ?200–400-year period from a 15-km-long zone of multiple vents within the Tongariro Volcanic Centre (TgVC), located at the southern end of the Taupo Volcanic Zone (TVZ). Most TgVC eruptives are plagioclase-dominant pyroxene andesites and dacites, with strongly porphyritic textures indicating their derivation from magmas that ascended slowly and stagnated at shallow depths. In contrast, the PM pyroclastic eruptives show petrographic features (presence of phenocrystic and groundmass hornblende, and the coexistence of olivine and augite without plagioclase during crystallisation of phenocrysts and microphenocrysts) which suggest that their crystallisation occurred at depth. Depths exceeding 8 km are indicated for the dacitic magmas, and >20 km for the andesitic and basaltic andesitic magmas. Other petrographic features (aphyric nature, lack of reaction rims around hornblende, and the common occurrence of skeletal microphenocrystic to groundmass olivine in the andesites and basaltic andesites) suggest the PM magmas ascended rapidly immediately prior to their eruption, without any significant stagnation at shallow depths in the crust. The PM eruptives show three distinct linear trends in many oxide–oxide diagrams, suggesting geochemical division of the six episodes into three chronologically-sequential groups, early, middle and late. Disequilibrium features on a variety of scales (banded pumice, heterogeneous glassy matrix and presence of reversely zoned phenocrysts) suggest that each group contains the mixing products of two end-member magmas. Both of these end-member magmas are clearly different in each of the three groups, showing that the PM magma system was completely renewed at least three times during the eruption sequence. Minor compositional diversity within the eruptives of each group also allows the PM magmas to be distinguished in terms of their source vents. Because petrography suggests that the PM magmas did not stagnate at shallow levels during their ascent, the minor diversity in magmas from different vents indicates that magmas ascended from depth through separate conduits/dikes to erupt at different vents either simultaneously or sequentially. These unique modes of magma transport and eruption support the inferred simultaneous or sequential tapping of small separate magma bodies by regional rifting in the southern Taupo Volcanic Zone during the PM eruption sequence (see companion paper).  相似文献   

15.
The depth to the top of magnetic dykes can be estimated from total field aeromagnetic data using the relation between the depth to magnetic sources and the autocorrelation function of magnetic data. By using synthetic anomalies we show that in the ideal case, depth can be determined to an accuracy of 10% or better, when the anomaly sources are two-dimensional dykes. However, the estimated depths depend on the width of the dykes. The estimated depth is about 0.6 times the actual depth to the top of thin dykes, and around the true depth for thick dykes having width-to-depth ratio around 3. The depth is considerably overestimated for very thick dykes (e.g., contacts, which is a special case of the thick dyke). Thus, the autocorrelation method requires that the width-to-depth ratio of the dyke is estimated independently to correctly estimate the depths. Alternatively, it must be assumed that the width-to-depth ratio for the two-dimensional source body is between 1.5 and 4.  相似文献   

16.
We present a model which accounts for the common, but paradoxical arrangement of composite intrusions (i.e. silicic core and mafic margins) on the basis of analogue experiments using gelatin and aqueous solutions. The present model involves simultaneous flow-out of the upper and lower magmas from a longitudinal crack along the chamber wall. Experimental results suggest that the mafic magma from the lower layer leaks from the side-wall of the chamber and travels faster than the silicic magma because of its lower viscosity, so that the mafic magma reaches the tip of the crack first. Once the mafic magma reaches the crack tip, then the rate of dyke propagation becomes determined by the viscosity of the less viscous mafic magma, and so it can advance rapidly. The viscous silicic magma can flow efficiently into the center of the dyke, being lubricated by the mafic magma margins. This model accounts for the common arrangement of composite intrusions and gives an efficient mechanism of flow of viscous silicic magmas.  相似文献   

17.
Most, if not all, magmas contain gas bubbles at depth before they erupt. Those bubbles play a crucial role in eruption dynamics, by allowing magma to degas, which causes the magma to accelerate as it ascends towards the surface. There must be a limit to that acceleration, however, because gas bubbles cannot grow infinitely fast. To explore that limit, a series of experiments was undertaken to determine the maximum rate at which bubbly high-silica rhyolite can decompress. Rhyolite melt that was hydrated at 150 MPa with ~5.3 wt.% dissolved water and contained 7 to 18 vol.% bubbles can degas in equilibrium at 875°C when decompressed at rates up to 1.2 MPa s−1 from 150 to 78 MPa, and up to 1.8 MPa s−1 when decompressed further to 42 MPa. In contrast, that same rhyolite cannot degas in equilibrium at 750°C if decompressed faster than 0.015–0.025 MPa s−1. When combined with other published experiments, the maximum rate of decompression for equilibrium degassing is found to increase by a factor of ten for every 50–75°C increase in temperature. When compared to predictions from conduit flow models that assume equilibrium degassing, it is found that such models greatly over-estimate the rate at which relatively cold rhyolite can decompress, whereas that assumption is largely correct for hot rhyolite, and thus for most other magmas, all of which are less viscous than rhyolite. In addition, most bubbles that were 20–30 μm in size at high pressure were lost from the population at low pressure. That absence suggests that only relatively large vesicles seen in volcanic pumice may be relics of pre-eruptive bubbles, even if small bubbles were originally present at depth.  相似文献   

18.
Examination of glass and crystal chemistry in the Rotoiti Pyroclastics (>100 km3 of magma) demonstrates that compositional diversity was produced by mingling of the main rhyolite magma body with small volumes of other magmas that had been crystallizing in separate stagnant magma chambers. Most (>90%) of the Rotoiti deposits were derived from a low-K2O, cummingtonite-bearing, rhyolitic magma (T1) discharged throughout the eruption sequence. T1 magma is homogeneous in composition (melt SiO2=77.80±0.28 wt.%), temperature (766±13 °C) and oxygen fugacity (NNO+0.92±0.09). Most T1 phenocrysts formed in a shallow (∼200 MPa), near water-saturated (awater=0.8) storage chamber shortly before eruption. Basaltic scoria erupted immediately before the rhyolites, and glass-bearing microdiorite inclusions within the rhyolite deposits, suggest that basalt emplaced on the floor of the chamber drove vigorous convection to produce the well-mixed T1 magma. Lithic lag breccias contain melt-bearing biotite granitoid inclusions that are compositionally distinct from T1 magma. The breccias which overlie the voluminous T1 pyroclastic flow deposits resulted from collapse of the syn-Rotoiti caldera. Post-collapse Rotoiti pumices contain T1 magma mingled with another magma (T2) that is characterized by high-K glass and biotite, and was cooler and less oxidised (712±16 °C; NNO−0.16±0.16). The mingled clasts contain bimodal disequilibrium populations of all crystal phases. The granitoid inclusions and the T2 magma are interpreted as derived from high-K magma bodies of varying ages and states of crystallization, which were adjacent to but not part of the large T1 magma body. We demonstrate that these high-K magmas contaminated the erupting T1 magma on a single pumice clast scale. This contamination could explain the reported wide range of zircon U–Th ages in Rotoiti pumices, rather than slow crystallization of a single large magma body.  相似文献   

19.
Nearly all eruptions in stratovolcanoes (composite volcanoes, central volcanoes) are supplied with magma through fractures. Consequently, a primary physical condition for an eruption to occur in a stratovolcano is that a magma-driven fracture is able to propagate to the surface. Magma-filled fractures, frozen or fluid, are referred to as sheet intrusions. More specifically, they are named dykes when subvertical, and inclined (or cone) sheets when inclined. Field observations indicate that most sheet intrusions do not reach the surface to feed eruptions but rather become arrested at various crustal depths. For this reason periods of volcanic unrest with sheet injections are much more common than volcanic eruptions. Whether a sheet intrusion becomes arrested or, alternatively, propagates to the surface depends primarily on the stress field in the stratovolcano. A stratovolcano normally consists of layers of contrasting mechanical properties, such as soft (low Youngs modulus) pyroclastic units and stiff (high Youngs modulus) lava flows. We present numerical models indicating that volcanoes composed of such layers commonly develop stress fields encouraging sheet and dyke arrest. The models indicate that a necessary condition for a sheet intrusion to reach the surface and feed a volcanic eruption is that the stress field along the sheet pathway becomes homogenised. We propose that much of the activity in a stratovolcano during a volcanic cycle encourages stress-field homogenisation. Field studies show that the sheet intrusions in individual stratovolcanoes have various dips: some are vertical dykes, others inclined sheets, and still others horizontal sills. Analytical models indicate that the dip of a sheet reaching the surface can have great effects on the magma transport during an eruption. This effect is normally greater for a flat volcano such as a collapse caldera than for a stratovolcano that forms a topographic high. We conclude that the shallower the dip of a sheet intrusion, the less will be its volumetric magma transport to the surface of a stratovolcano.Editorial responsibility: D Dingwell  相似文献   

20.
The paper discusses the results of geodetic investigations performed in the region of the large 1975–1976 Tolbachik fissure eruption in Kamchatka. Using data from repeated triangulation and trigonometric levelings, horizontal and vertical displacements have been detected in an area of 3,500 km2. Two zones have been recognized: the tension and uplift zone that is probably due to magma intrusion from depths to the surface along the line of new cones and the extensive compensative subsidence zone located at a distance of 20–50 km from the nearest newly-formed cones. Measurements made with small distance measuring device showed the dynamics of feeding basalt dykes intrusion and made it possible to determine their width (a little greater than 1 m) and magma and gas overpressure (50–250 bar). Data have been obtained on dimensions and growth of cones and on vertical ground deformation in the area of new cones during and after the eruption.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号