首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献,搜索用时 171 毫秒
1.
执行各种低轨卫星任务的官方在公布定轨结果的同时并没有公布星载接收机的天线相位中心校正(PCV)信息,而PCV误差是星载GNSS精密定轨必须考虑的主要误差源之一。以GRACE卫星任务为例研究PCV误差对低轨卫星精密定轨的影响,利用GPS观测数据直接估计与相位误差有关的天线相位偏差(PCO)和PCV参数,然后利用K波段测距系统和卫星激光测距仪数据进行定轨评定。  相似文献   

2.
采用2015年5月24日—30日的Swarm星载GPS双频观测数据,基于Melbourne-Wübbena(MW)和消电离层线性组合,在精密单点定位技术的基础上,采用批处理最小二乘估计法对不同轨道高度的Swarm系列卫星进行非差运动学精密定轨。利用星载GPS相位观测值残差、与欧空局发布的简化动力学轨道对比,以及SLR检核3种方法对Swarm系列卫星非差运动学定轨结果进行精度评估。结果表明:①Swarm系列卫星星载GPS相位观测值残差RMS为6~7 mm;②与欧空局发布的简化动力学轨道进行求差,径向、切向及法向轨道差值RMS为2~4 cm;③与欧空局发布的运动学轨道进行求差,径向、切向及法向轨道差值RMS为1~2 cm;④SLR检核结果表明Swarm-A/B/C卫星轨道精度为3~4 cm。因此,采用非差运动学定轨方法与本文提供的定轨策略进行Swarm系列卫星精密定轨是切实可行的,定轨精度为厘米级。  相似文献   

3.
邵凯  易彬  张厚喆  谷德峰 《测绘学报》2021,50(4):487-495
单星GPS相位模糊度固定可以显著提升低轨卫星的定轨精度。目前,CNES/CLS、武汉大学和CODE 3家机构都已公开发布用于单星模糊度固定的GPS整数相位钟产品。本文首先利用整数相位钟方法实现单星模糊度固定,并应用于低轨卫星精密定轨中;然后,对比分析了不同机构提供的整数相位钟产品在低轨卫星单星模糊度固定和精密定轨中的应用性能;最后,通过对GRACE-FO编队卫星数据进行处理,发现基于不同机构产品的窄巷模糊度固定成功率都可以达到94%左右。不同机构产品获得的模糊度固定解轨道的SLR(satellite laser ranging)检核残差RMS约为0.9 cm,与模糊度浮点解的定轨结果相比,单星绝对轨道精度提高了约30%。在分别利用CNES/CLS、武汉大学和CODE产品实现单星模糊度固定后,双星相对轨道的KBR(K-band ranging)检核残差RMS分别从5.7、5.4和5.3 mm减小到2.1、2.0和1.5 mm。结果表明,不同整数相位钟产品在GRACE-FO卫星单星模糊度固定和精密定轨中的效果相当。  相似文献   

4.
张勤  燕兴元  黄观文  解世超  曹钰 《测绘学报》1957,49(9):1101-1111
针对BDS-2和BDS-3卫星联合精密定轨和精密定位中高精度BDS-2 IGSO/MEO卫星天线相位中心改正在轨估计模型的缺失问题,本文采用了改进的PCV和z-offset参数估计方法,精化了BDS-2 IGSO/MEO卫星B1I/B3I无电离层组合PCC模型。数值验证结果表明:相比北斗官方发布的PCO地面标定值,本文精化的PCC模型使得精密轨道SLR残差的STD减小了0.6~2.4 cm,改善百分比为8.6%~33.3%;基于本文精化的BDS-2和已有BDS-3卫星精化的PCC模型使得精密定位浮点解在高程方向显著提升了9.5 mm(37.2%)。  相似文献   

5.
田英国  郝金明 《测绘学报》2016,45(12):1406-1412
接收机天线相位中心偏差是星载GPS精密定轨必须考虑的误差源,而PCV一般需要多天观测数据进行联合估计,其估计方法及效率显得尤为重要。本文针对传统PCV综合方法计算效率较低、需要存储多天的法方程以及先验信息等问题,提出了一种改进的PCV综合方法。该方法通过递推的方式,既不需要存储多天的法方程及先验信息,又能够及时提供PCV信息,进而提高了PCV值获取的效率,为实现Swarm卫星PCV的快速求解提供了一种新的途径。最后,利用星载GPS数据进行了Swarm卫星精密定轨。试验结果表明:采用改进的PCV综合方法,能够提高PCV综合效率,降低所需存储空间;通过与外部精密轨道比较表明,进行PCV改正后,Swarm卫星的径向、切向和法向定轨精度均有不同程度的提高,尤其是对法向精度改善最为明显,平均提高约23.3mm;进行PCV改正后,Swarm卫星各个方向的定轨精度均优于2cm。  相似文献   

6.
在高精度GNSS定位中,接收机天线相位中心偏差(PCO)和天线相位中心变化(PCV)的影响不可忽略。目前,IGS发布的绝对天线相位模型文件中包含了GPS/GLONASS系统的标定值,但是没有发布北斗系统(BDS)的标定值。本文借助机械臂可以控制天线自由旋转,在数小时内实现全方位GNSS观测的特性,采用历元间差分的方法对接收机天线包括GPS L1/L2和BDSB1I/B2I/B3I等多个频点的PCO和PCV分别进行标定和拟合。标定结果表明,比较最小二乘估计的GPS PCO与IGS发布值,其STD和RMS在L1/L2上均小于1 mm;BDS PCO估计值的STD在B1I/B2I/B3I上分别为0.5、0.3、0.3 mm。利用球谐函数拟合的GPS PCV格网值与IGS发布值相比,其偏差在天顶距小于75°时均小于1.5 mm。BDS PCV拟合值范围均在-5~8 mm,且随天顶距变化曲线呈现波谷状。BDS PCV在低高度角处拟合值波动较大,随方位角变化曲线峰值-峰值最大达到了5.6 mm。  相似文献   

7.
联合星载GPS双频观测值与简化的动力学模型,在卫星运动方程中引入适当的伪随机脉冲参数,对SWARM卫星进行精密定轨。采用星载GPS相位观测值残差、重叠轨道以及与外部轨道对比等3种方法对SWARM卫星简化动力学定轨结果进行检核。结果表明:SWARM星载GPS相位观测值残差RMS为7~10mm;径向、切向以及法向6h重叠轨道差值RMS均在1cm左右,3个方向均无明显的系统误差。通过与欧空局(ESA)发布的精密轨道进行对比分析,径向轨道差值RMS为2~5cm,切向轨道差值RMS为2~5cm,法向轨道差值RMS为2~4cm,3D轨道差值RMS为4~7cm;SWARM-B定轨精度优于SWARM-A与SWARM-C。因此,采用简化动力学法与本文提供的定轨策略进行SWARM卫星精密定轨是切实可行的,定轨结果良好且稳定,定轨精度达到厘米级。  相似文献   

8.
低轨卫星编队的精密轨道和基线确定是分布式InSAR卫星系统完成科学任务的重要前提.目前,基于GNSS数据的缩减动力学绝对和相对轨道确定是获得高精度轨道和基线产品的主要手段.本文利用天绘二号编队星载GPS实测数据,采用缩减动力学定轨方法进行编队卫星绝对和相对定轨研究.GPS数据质量分析表明,A星与B星接收机的信号跟踪能力和数据质量基本相当.通过对轨道机动进行常值加速度建模,可以有效消除机动对天绘二号编队绝对和相对定轨的影响.单星绝对定轨结果表明,6 h重叠弧段轨道差值三维(3D)RMS小于1.2 cm,A星和B星绝对轨道的卫星激光测距数据检核残差RMS分别为2.76 cm和2.33 cm.双星相对定轨结果表明,6 h重叠弧段基线差值3D RMS达到0.66 mm,本文基线产品与西安测绘研究所基线产品互比对差值RMS在径向、切向、法向和3D方向分别为0.73、1.11、0.51和1.43 mm.  相似文献   

9.
袁俊军 《北京测绘》2018,32(3):278-280
利用GRACE卫星2015年1月1日至7日的星载GPS观测数据,基于卫星简化动力学定轨方法和事后批处理定轨模式,利用24小时弧段进行精密定轨。采用多种手段进行评价定轨精度,通过分析,观测值定轨残差稳定在7mm,与德国地学中心(GFZ)发布的事后精密轨道在径向、切向、法向的RMS值分别是3cm,2cm,3cm,利用SLR检核轨道精度优于4cm。结果表明,使用简化动力学定轨可实现低轨卫星的cm级高精度定轨。  相似文献   

10.
天线相位中心变化(PCV)作为低轨卫星精密定轨的重要误差之一,必须提前进行标定和建模。本文基于消电离层组合简化动力学定轨的残差建立了SWARM卫星星载GPS的PCV模型,并分析了PCV对卫星定轨的影响。结果表明SWARM三颗卫星的PCV模型非常相似,与高度角、方位角存在强相关性,部分区最大值可达2.0cm,而且PCV对SWARM卫星的简化动力学和几何轨道的影响较大,尤其是法向,最大可到2.0cm。  相似文献   

11.
The joint Taiwan–US mission FORMOSAT-3/ COSMIC (COSMIC) was launched on April 17, 2006. Each of the six satellites is equipped with two POD antennas. The orbits of the six satellites are determined from GPS data using zero-difference carrier-phase measurements by the reduced dynamic and kinematic methods. The effects of satellite center of mass (COM) variation, satellite attitude, GPS antenna phase center variation (PCV), and cable delay difference on the COSMIC orbit determination are studied. Nominal attitudes estimated from satellite state vectors deliver a better orbit accuracy when compared to observed attitude. Numerical tests show that the COSMIC COM must be precisely calibrated in order not to corrupt orbit determination. Based on the analyses of the 5 and 6-h orbit overlaps of two 30-h arcs, orbit accuracies from the reduced dynamic and kinematic solutions are nearly identical and are at the 2–3 cm level. The mean RMS difference between the orbits from this paper and those from UCAR (near real-time) and WHU (post-processed) is about 10 cm, which is largely due to different uses of GPS ephemerides, high-rate GPS clocks and force models. The kinematic orbits of COSMIC are expected to be used for recovery of temporal variations in the gravity field.  相似文献   

12.
The space segment of the European Global Navigation Satellite System (GNSS) Galileo consists of In-Orbit Validation (IOV) and Full Operational Capability (FOC) spacecraft. The first pair of FOC satellites was launched into an incorrect, highly eccentric orbital plane with a lower than nominal inclination angle. All Galileo satellites are equipped with satellite laser ranging (SLR) retroreflectors which allow, for example, for the assessment of the orbit quality or for the SLR–GNSS co-location in space. The number of SLR observations to Galileo satellites has been continuously increasing thanks to a series of intensive campaigns devoted to SLR tracking of GNSS satellites initiated by the International Laser Ranging Service. This paper assesses systematic effects and quality of Galileo orbits using SLR data with a main focus on Galileo satellites launched into incorrect orbits. We compare the SLR observations with respect to microwave-based Galileo orbits generated by the Center for Orbit Determination in Europe (CODE) in the framework of the International GNSS Service Multi-GNSS Experiment for the period 2014.0–2016.5. We analyze the SLR signature effect, which is characterized by the dependency of SLR residuals with respect to various incidence angles of laser beams for stations equipped with single-photon and multi-photon detectors. Surprisingly, the CODE orbit quality of satellites in the incorrect orbital planes is not worse than that of nominal FOC and IOV orbits. The RMS of SLR residuals is even lower by 5.0 and 1.5 mm for satellites in the incorrect orbital planes than for FOC and IOV satellites, respectively. The mean SLR offsets equal \(-44.9, -35.0\), and \(-22.4\) mm for IOV, FOC, and satellites in the incorrect orbital plane. Finally, we found that the empirical orbit models, which were originally designed for precise orbit determination of GNSS satellites in circular orbits, provide fully appropriate results also for highly eccentric orbits with variable linear and angular velocities.  相似文献   

13.
Homogeneous reprocessing of GPS,GLONASS and SLR observations   总被引:3,自引:2,他引:1  
The International GNSS Service (IGS) provides operational products for the GPS and GLONASS constellation. Homogeneously processed time series of parameters from the IGS are only available for GPS. Reprocessed GLONASS series are provided only by individual Analysis Centers (i. e. CODE and ESA), making it difficult to fully include the GLONASS system into a rigorous GNSS analysis. In view of the increasing number of active GLONASS satellites and a steadily growing number of GPS+GLONASS-tracking stations available over the past few years, Technische Universität Dresden, Technische Universität München, Universität Bern and Eidgenössische Technische Hochschule Zürich performed a combined reprocessing of GPS and GLONASS observations. Also, SLR observations to GPS and GLONASS are included in this reprocessing effort. Here, we show only SLR results from a GNSS orbit validation. In total, 18 years of data (1994–2011) have been processed from altogether 340 GNSS and 70 SLR stations. The use of GLONASS observations in addition to GPS has no impact on the estimated linear terrestrial reference frame parameters. However, daily station positions show an RMS reduction of 0.3 mm on average for the height component when additional GLONASS observations can be used for the time series determination. Analyzing satellite orbit overlaps, the rigorous combination of GPS and GLONASS neither improves nor degrades the GPS orbit precision. For GLONASS, however, the quality of the microwave-derived GLONASS orbits improves due to the combination. These findings are confirmed using independent SLR observations for a GNSS orbit validation. In comparison to previous studies, mean SLR biases for satellites GPS-35 and GPS-36 could be reduced in magnitude from \(-35\) and \(-38\)  mm to \(-12\) and \(-13\)  mm, respectively. Our results show that remaining SLR biases depend on the satellite type and the use of coated or uncoated retro-reflectors. For Earth rotation parameters, the increasing number of GLONASS satellites and tracking stations over the past few years leads to differences between GPS-only and GPS+GLONASS combined solutions which are most pronounced in the pole rate estimates with maximum 0.2 mas/day in magnitude. At the same time, the difference between GLONASS-only and combined solutions decreases. Derived GNSS orbits are used to estimate combined GPS+GLONASS satellite clocks, with first results presented in this paper. Phase observation residuals from a precise point positioning are at the level of 2 mm and particularly reveal poorly modeled yaw maneuver periods.  相似文献   

14.
首次搭载GPS/BDS双模接收机全球导航卫星掩星探测仪(GNOS)的风云三号C星于2013年9月23日的成功发射,为研究低轨卫星对BDS定轨增强提供了便利。本文首先对低轨卫星GNOS搭载的GPS/BDS双模接收机的观测数据进行统计,并分析了伪距测量精度。然后在全球测站、区域测站两种布局情况下,对无GNOS的BDS单系统定轨、无GNOS的GPS/BDS双系统定轨、有GNOS的BDS单系统定轨增强、有GNOS的GPS/BDS双系统定轨增强4种方案进行北斗轨道及钟差比较分析。结果表明,GNOS对北斗卫星轨道增强在全球测站下,GEO卫星切向精度提升最为显著,提升程度达60%,其次是法向和其他类型卫星切向,部分弧段个别GEO卫星径向精度稍有下降。双系统定轨增强中可视弧段钟差重叠精度RMS值有0.1ns量级改善。7个国内测站区域监测网的定轨试验中对轨道进行了预报,结果表明GNOS对北斗GEO卫星轨道预报精度切向提升达85%,其余方向及卫星有较大改善,平均21.7%。可视弧段钟差重叠精度RMS值有0.5ns量级改善。  相似文献   

15.
采用HY2A卫星2013年2月的实测数据,研究了GPS、星载多谱勒无线电定轨定位系统(DORIS)及卫星激光测距(SLR)三种观测数据的单独和联合定轨问题。通过与法国CNES的精密轨道数据比较发现:分别采用GPS、DORIS和SLR数据进行单独定轨,GPS数据确定轨道的径向平均精度为1.3cm,三维位置约为6.2cm;DORIS定轨的径向平均精度为1.6cm,比GPS结果略差;SLR确定轨道的径向平均精度为2.3cm。用GPS、DORIS和SLR三种数据联合定轨,确定轨道的径向平均精度为1.2cm,三维位置约为6.5cm。与星载GPS定轨结果比较,三种观测数据的联合定轨在提高卫星轨道确定精度上不明显,但联合定轨有利于保持计算轨道精度相对稳定。用站星间高度角大于60°的SLR数据检验GPS/DORIS联合确定的轨道,两者在测距方向的均方差为2.5cm,可见基于HY2A的观测数据可以实现cm级的定轨需求。  相似文献   

16.
高精度、高可靠性的卫星轨道是实现低轨卫星精密应用的重要前提,而模糊度固定技术是提高卫星定轨精度的关键途径。研究了基于整数钟的星间单差模糊度固定原理和方法,并利用2019年4月—5月的两颗GRACE-FO(gravity recovery and climate experiment follow on)卫星数据(GRACE-C/D)系统评估了固定解对低轨卫星简化动力学和运动学定轨的精度提升效果。结果表明,两颗卫星简化动力学和运动学定轨的宽巷模糊度固定率均达到99%,而窄巷模糊度固定率在95%左右。对于简化动力学定轨,GRACE-C/D固定解轨道的重叠轨道的3D均方根误差(root mean square error, RMSE)分别从7.1 mm和7.4 mm减小到了4.2 mm和3.6 mm;卫星激光测距(satellite laser ranging, SLR)残差标准差(standard deviation, STD)分别从15.9 mm和14.4 mm降低到了10.8 mm和11.0 mm,精度提升了32%和24%;K波段测距残差RMSE从8.0 mm减小到2.9 mm,进一步表明固定解还能有效提升低轨卫星间相对位置精度。对于运动学定轨,与精密科学轨道产品互差3D RMSE,浮点解分别为37.5 mm和36.4 mm,固定解分别为27.7 mm和25.5 mm,精度提升约28%,SLR残差STD也减小了约20%。  相似文献   

17.
利用Jason-3星载GPS观测数据,采用简化动力学方法和运动学方法对Jason-3卫星进行精密定轨研究. 通过载波相位残差、重叠轨道对比、参考轨道对比和卫星激光测距(SLR)轨道检核四种方式评定轨道精度. 计算相位残差均方根(RMS)值,简化动力学轨道的RMS值在0.7~0.8 cm,运动学轨道的RMS值在0.50~0.55 cm;简化动力学轨道重叠部分径向RMS值达到0.32 cm,运动学轨道重叠部分径向RMS值达到1.12 cm;与国际DORIS服务(IDS)官方提供的参考轨道对比,简化动力学轨道径向精度达到1.47 cm,运动学轨道径向精度达到4.36 cm;利用SLR观测数据进行核验,简化动力学轨道精度整体优于2.1 cm,运动学轨道精度整体优于3.3 cm. 通过实验证明:Jason-3卫星的简化动力学轨道和运动学轨道的精度均达到cm级.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号