共查询到20条相似文献，搜索用时 31 毫秒
1.
A seismic trace is assumed to consist of a known signal pulse convolved with a reflection coefficient series plus a moving average noise process (colored noise). Multiple reflections and reverberations are assumed to be removed from the trace by conventional means. The method of maximum likelihood (ML) is used to estimate the reflection coefficients and the unknown noise parameters. If the reflection coefficients are known from well logs, the seismic pulse and the noise parameters can be estimated. The maximum likelihood estimation problem is reduced to a nonlinear least-squares problem. When the further assumption is made that the noise is white, the method of maximum likelihood is equivalent to the method of least squares (LS). In that case the sampling rate should be chosen approximately equal to the Nyquist rate of the trace. Statistical and numerical properties of the ML- and the LS-estimates are discussed briefly. Synthetic data examples demonstrate that the ML-method gives better resolution and improved numerical stability compared to the LS-method. A real data example shows the ML- and LS-method applied to stacked seismic data. The results are compared with reflection coefficients obtained from well log data. 相似文献
2.
Singular value decomposition (SVD) is applied to the identification of seismic reflections by using two different models: the impulse response model, where a seismic trace is assumed to consist of a known signal pulse convolved with a reflection coefficient series plus noise, and the delayed pulse model, where the seismic signal is assumed to consist of a small number of delayed pulses of known shape and with unknown amplitudes and arrival times. SVD clearly shows how least-squares estimation of the reflection coefficients may become unstable, since a division by the singular values is required. Two methods for stabilizing this procedure are investigated. The inverse of the singular values may be replaced by zeros when they are less than a given threshold. This is called the SVD cut-off method. Alternatively, we may use ridge regression which in filter design corresponds to assuming white noise. Statistical methods are used to compute an optimal SVD cut-off level and also to compute an optimal weighting parameter in ridge regression. Numerical studies indicate that the use of SVD cut-off or ridge regression stabilizes the least-squares procedure, but that the results are inferior to maximum-likelihood estimation where the noise is assumed to be filtered white noise. For the delayed pulse model, we use a linearization procedure to iteratively update the estimates of both the reflection amplitudes and the arrival times. In each step, the optimal SVD cut-off method is used. Confidence regions for the estimated reflection amplitudes and arrival times are also computed. Synthetic data examples demonstrate the effectiveness of this method. In a real data example, the maximum-likelihood method assuming an impulse response model is first used to obtain initial estimates of the number of reflections and their amplitudes and traveltimes. Then the iterative procedure is used to obtain improved estimates of the reflection amplitudes and traveltimes. 相似文献
3.
A synthetic seismogram that closely resembles a seismic trace recorded at a well may not be at all reliable for, say, stratigraphic interpretation around the well. The most accurate synthetic seismogram is, in general, not the one that displays the smallest errors of fit to the trace but the one that best estimates the noise on the trace. If the match is confined to a short interval of interest or if the seismic reflection wavelet is allowed to be unduly long, there is considerable danger of forcing a spurious fit that treats the noise on the trace as part of the seismic reflection signal instead of making a genuine match with the signal itself. This paper outlines tests that allow an objective and quantitative evaluation of the accuracy of any match and illustrates their application with practical examples. The accuracy of estimation is summarized by the normalized mean square error (NMSE) in the estimated reflection signal, which is shown to be (/n)(PN/PS) where PS/PN is the signal-to-noise power ratio and n is the spectral smoothing factor. That is, the accuracy varies directly with the ratio of the power in the signal (taken to be the synthetic) to that in the noise on the seismic trace, and the smoothing acts to improve the accuracy of the predicted signal. The construction of confidence intervals for the NMSE is discussed. Guidelines for the choice of the spectral smoothing factor n are given. The variation of wavelet shape due to different realizations of the noise component is illustrated, and the use of confidence intervals on wavelet phase is recommended. Tests are described for examining the normality and stationarity of the errors of fit and their independence of the estimated reflection signal. 相似文献
4.
地震勘探资料噪声压制及信噪比提高是整个地震勘探信号处理过程中的重要任务,随着地震勘探深度的增加及其复杂性,人们对地震数据质量的要求越来越高.勘探环境的复杂化使得采集到的地震资料中有效信号被大量噪声淹没,无法清晰辨识,严重影响后续的数据处理与解释.小波去噪是地震勘探中常用且发展较成熟的一种方法,但是其涉及到的阈值函数选取问题一直令人困扰,虽然已有多种阈值函数被提出,但仍存在各自的缺陷.本文利用小波分解在时域及频域良好的信号细节体现特性,引入模式识别中的非负矩阵分解(NMF)谱分离思想,针对小波系数阈值优化问题,提出了一种小波域图非负矩阵分解(GNMF)消噪算法.该方法首先在小波分解基础上,利用GNMF算法实现小波分解系数谱中信号分量与噪声分量的谱分离,然后通过反变换重构各分离子谱对应的子信号,最后利用K均值聚类算法将得到的多个子信号划分为信号类及噪声类,最终得到重构信号及分离噪声.合成记录和实际地震资料的消噪结果验证了新方法在提高信号与噪声分离准确性和精度方面的有效性,同时新方法避免了阈值选取造成的噪声压制不理想或有效成分损失问题.与小波消噪结果的对比及数值分析也说明了新方法在噪声压制及有效成分保持方面的优势. 相似文献
5.
有效地压制地震信号中的噪声是地震信号解释和后续处理的重要环节之一.本文建立两种双树复小波域双变量模型对地震信号中的随机噪声进行压制.地震信号经双树复小波变换后,同一方向实部与虚部系数、实部(或虚部)系数与对应的模之间存在较强的相关性.鉴于此,对同一方向实部与虚部小波系数建立双变量模型,从含噪地震信号小波系数中估计原始信号的小波系数,再基于双树复小波逆变换重构得到降噪后的地震信号.进一步对同一方向实部(或虚部)系数与对应的模建立双变量模型,得到地震信号随机噪声压制的第二种双树复小波域双变量方法.最后对合成地震记录和实际地震资料中的随机噪声进行压制的实验结果证实本文两种方法都能够有效地压制地震信号中的随机噪声. 相似文献
6.
7.
地震信号中的随机噪声是一种干扰波,严重降低了地震信号的信噪比,并影响着资料的后续处理和分析.本文根据地震信号中有效信号和随机噪声的差异,结合分数阶B样条小波变换与高斯尺度混合模型提出了一种地震信号随机噪声压制方法.首先利用分数阶B样条小波变换将含噪地震信号映射到最优分数阶小波时频域内,然后对各小波子带系数分别建立高斯尺度混合模型,由贝叶斯方法估计出源地震信号小波系数,最后使用分数阶B样条小波逆变换重构得到降噪后的地震信号.利用本文方法对合成地震记录和实际地震信号进行降噪处理,实验结果表明本文方法能够有效地压制地震信号中的随机噪声,并且较好地保留了有效信号. 相似文献
8.
小波阈值方法中硬、软阈值方法是地震信号降噪常用方法,但容易造成信号中高频信息丢失导致地震误判和漏判情况发生。小波综合阈值方法继承和发展了硬、软阈值降噪方法的优点,对信号高频部分用硬阈值方法,以提高高频信号能量,对信号低频部分用软阈值方法,提高信号降噪能力的同时保证信号连续性和光滑性。利用噪声信号小波系数小和地震信号小波系数大的特征,进行雷克子波降噪仿真实验和实际地震信号降噪实验。仿真实验表明,小波综合阈值方法降噪后波形MSE值最小,且降噪后与原信号波形最近似,降噪后波形高频部分能量增强且抑制低频部分能量。最后,对实际采集的地震信号进行降噪处理,处理后信号中能量增强被压制,利用处理后的信号可得到地震的初至时间。 相似文献
9.
R.-G. FERBER 《Geophysical Prospecting》1985,33(2):212-223
A main problem in computing reflection coefficients from seismograms is the instability of the inversion procedure due to noise. This problem is attacked for two well-known inversion schemes for normal-incidence reflection seismograms. The crustal model consists of a stack of elastic, laterally homogeneous layers between two elastic half-spaces. The first method, which directly computes the reflection coefficients from the seismogram is called “Dynamic Deconvolution”. The second method, here called “Inversion Filtering”, is a two-stage procedure. The first stage is the construction of a causal filter by factorization of the spectral function via Levinson-recursion. Filtering the seismogram is the second stage. The filtered seismogram is a good approximation for the reflection coefficients sequence (unless the coefficients are too large). In the non-linear terms of dynamic deconvolution and Levinson-recursion the noise could play havoc with the computation. In order to stabilize the algorithms, the bias of these terms is estimated and removed. Additionally incorporated is a statistical test for the reflection coefficients in dynamic deconvolution and the partial correlation coefficients in Levinson-recursion, which are set to zero if they are not significantly different from noise. The result of stabilization is demonstrated on synthetic seismograms. For unit spike source pulse and white noise, dynamic deconvolution outperforms inversion filtering due to its exact nature and lesser computational burden. On the other hand, especially in the more realistic bandlimited case, inversion filtering has the great advantage that the second stage acts linearly on the seismogram, which allows the calculation of the effect of the inversion procedure on the wavelet shape and the noise spectrum. 相似文献
10.
In this paper, a novel data denoising method is proposed for seismic exploration with a vibrator which produces a chirp-like signal. The method is based on fractional wavelet transform (FRWT), which is similar to the fractional Fourier transform (FRFT). It can represent signals in the fractional domain, and has the advantages of multi-resolution analysis as the wavelet transform (WT). The fractional wavelet transform can process the reflective chirp signal as pulse seismic signal and decompose it into multi-resolution domain to denoise. Compared with other methods, FRWT can offer wavelet transform for signal analysis in the timefractional-frequency plane which is suitable for processing vibratory seismic data. It can not only achieve better denoising performance, but also improve the quality and continuity of the reflection syncphase axis. 相似文献
11.
传统基于单相介质理论的储层参数反演方法将孔隙流体与固体骨架等效为单一固体,弱化了孔隙流体的影响,反演结果精度不高.本文提出根据双相介质理论反演储层参数的方法.首先,在前人研究的基础上,利用岩石物理模型建立弹性参数与孔隙度、饱和度、泥质含量等储层参数间的关系,进而将双相介质反射系数推导为储层参数的函数;其次,根据贝叶斯反演理论,在高斯噪声假设的基础上,采用更加符合实际情况的修正柯西分布函数描述反射系数的稀疏性,推导出储层物性参数目标反演函数;最后,应用差分进化非线性全局寻优算法来求解目标反演函数,使得反演结果与实际资料间误差最小.新方法旨在突出流体对介质反射系数的影响,以期得到较高的储层参数反演精度.模型与实际资料测试均表明该方法可行、有效且反演精度较高. 相似文献
12.
为研究地震子波相位对反射系数序列反演的影响,在自回归滑动平均(ARMA)模型描述子波的基础上,提出采用z域对称映射ARMA模型零极点的方法构造了一系列相同振幅谱、不同相位谱的地震子波,并结合谱除法对人工合成地震记录进行反射系数序列反演.理论分析表明,子波相位估计不准时反射系数序列反演结果中残留一个纯相位滤波器,该纯相位滤波器的相位谱为真实子波和构造子波的相位谱之差.采用丰度和变分作为评价方法,在反演结果中确定出真实的或准确的反射系数序列.仿真实验和实际数据处理结果也验证了子波相位对反射系数序列反演的影响规律和评价方法的有效性,为进一步提高反射系数序列反演结果精度指明了研究方向. 相似文献
13.
14.
Bussgang算法是针对褶积盲源分离问题提出的,本文将其用于地震盲反褶积处理.由于广义高斯概率密度函数具有逼近任意概率密度函数的能力,从反射系数序列的统计特征出发,引入广义高斯分布来体现反射系数序列超高斯分布特征.依据反射系数序列的统计特征和Bussgang算法原理,建立以Kullback-Leibler距离为非高斯性度量的目标函数,并导出算法中涉及到的无记忆非线性函数,最终实现了地震盲反褶积.模型试算和实际资料处理结果表明,该方法能较好地适应非最小相位系统,能够同时实现地震子波和反射系数估计,有效地提高地震资料分辨率. 相似文献
15.
In this paper, we propose a non-local, transform domain noise suppression framework to improve the quality of seismic reflection data. The original non-local means (NLM) algorithm measures similarities in the data domain and we generalize it in the nonsubsampled contourlet transform (NSCT) domain. NSCT gives a multiscale, multiresolution and anisotropy representation of the noisy input. The redundancy information in NSCT subbands can be utilized to enhance the structures in the original seismic data. Like the wavelet transform, NSCT coefficients in each subband follow the generalized Gaussian distribution and the parameters can be estimated using appropriate techniques. These parameters are used to construct our proposed NSCT domain filtering algorithm. Applications for synthetic and real seismic data of the proposed algorithm demonstrate its effectiveness on seismic data random noise suppression. 相似文献
16.
This article utilizes Savitzky–Golay (SG) filter to eliminate seismic random noise. This is a novel method for seismic random noise reduction in which SG filter adopts piecewise weighted polynomial via leastsquares estimation. Therefore, effective smoothing is achieved in extracting the original signal from noise environment while retaining the shape of the signal as close as possible to the original one. Although there are lots of classical methods such as Wiener filtering and wavelet denoising applied to eliminate seismic random noise, the SG filter outperforms them in approximating the true signal. SG filter will obtain a good tradeoff in waveform smoothing and valid signal preservation under suitable conditions. These are the appropriate window size and the polynomial degree. Through examples from synthetic seismic signals and field seismic data, we demonstrate the good performance of SG filter by comparing it with the Wiener filtering and wavelet denoising methods. 相似文献
17.
R. E. WHITE 《Geophysical Prospecting》1977,25(1):165-178
Optimum stacking filters based on estimates of trace signal-to-uncorrelated noise ratios are assessed and compared in performance with conventional straight stacking. It is shown that for the trace durations and signal bandwidths normally encountered in seismic reflection data the errors in estimating signal/noise ratios largely counteract the theoretical advantages of the optimum filter. The more specific the filter (e.g. the more frequency components included in its design) the more this is true. Even for a simple weighted stack independent of frequency, the performance is likely to be better than a straight (equal weights) stack only for relatively high signal/noise ratios, when the performance is not critical anyway. 相似文献
18.
目前地震波在地质构造探测和结构损伤检测中具有广泛的应用。文中将EMD和EEMD算法建立的最优降噪模型应用于地震信号去噪中。首先通过低通滤波和带通滤波算法对比分析降噪效果。然后通过对光滑性系数α取不同的值比较信号的光滑性。并利用模拟信号添加高斯白噪声干扰，在同时考虑将信号光滑性和相似性的情况下用最优降噪光滑模型对数据进行处理，最后用实际地震波验证模型在地震波数据处理中应用的可行性。结果表明，EMD和EEMD最优降噪光滑模型都能对地震波进行降噪和光滑性处理，带通滤波与EEMD算法建立的最优降噪光滑模型效果较好。在实际应用中具有更好的效果。 相似文献
19.
B. URSIN 《Geophysical Prospecting》1979,27(1):1-15
In the mathematical theory of seismic signal detection and parameter estimation given, the seismic measurements are assumed to consist of a sum of signals corrupted by additive Gaussian white noise uncorrelated to the signals. Each signal is assumed to consist of a signal pulse multiplied by a space-dependent amplitude function and with a space-dependent arrival time. The signal pulse, amplitude, and arrival time are estimated by the method of maximum likelihood. For this signal-and-noise model, the maximum likelihood method is equivalent to the method of least squares which will be shown to correspond to using the signal energy as coherency measure. The semblance coefficient is equal to the signal energy divided by the measurement energy. For this signal model we get a more general form of the semblance coefficient which reduces to the usual expression in the case of a constant signal amplitude function. The signal pulse, amplitude, and arrival time can be estimated by a simple iterative algorithm. The effectiveness of the algorithm on seismic field data is demonstrated. 相似文献
20.
针对地震勘探资料湮没在随机噪声中的微弱同相轴问题提出基于混沌理论的混沌振子检测算法. 利用修正的Duffing_Holmes方程建立检测微弱同相轴的混沌振子系统,之后经过对同相轴的扫描处理,构成新子波等时间间隔序列W(t),与此同时对随机噪声也进行相同的截断. 截断的随机噪声在混沌振子系统中可以具有与周期信号相同的表现;经过大量仿真实验确定出满足通常地震勘探子波延续时间的使混沌振子检测子波不呈现周期相态的随机噪声截断时间范围. 选用与松辽盆地T1、T2反射层类似的子波函数并构成待检微弱周期信号,经过MATLAB仿真试验成功地检测出该弱信号,信噪比达到约-103dB. 相似文献