共查询到20条相似文献，搜索用时 15 毫秒
1.
In geological imaging spectrometry (i.e., hyperspectral remote sensing), surface compositional information (e.g., mineralogy and subsequently chemistry) is obtained by statistical comparison (by means of spectral matching algorithms) of known field- or library spectra to unknown image spectra. Though these algorithms are readily used, little emphasis has been given to comparison of the performance of the various spectral matching algorithms. Four spectral measures are presented: three that calculate the angle (spectral angle measure, SAM), the vector distance (Euclidean distance measure, ED) or the vector cross-correlation (spectral correlation measure, SCM), between a known reference and unknown target spectrum and a fourth measure that measures the discrepancy of probability distributions between two pixel vectors (the spectral information divergence, SID). The performance of these spectral similarity measures is compared using synthetic hyperspectral and real (i.e., Airborne Visible Infrared Imaging Spectrometer, AVIRIS) hyperspectral data of a (artificial or real) hydrothermal alteration system characterised by the minerals alunite, kaolinite, montmorillonite and quartz. Two statistics are used to assess the performance of the spectral similarity measures: the probability of spectral discrimination (PSD) and the power of spectral discrimination (PWSD). The first relates to the ability of the selected set of spectral endmembers to map a target spectrum, whereas the second expresses the capability of a spectral measure to separate two classes relative to a reference class. Analysis of the synthetic data set (i.e., simulated alteration zones with crisp boundaries at 1–2 nm spectral resolution) shows that (1) the SID outperforms the classical empirical spectral matching techniques (SAM, SCM and ED), (2) that SCM (SID, SAM and ED do not) exploits the overall shape of the reflectance curve and hence its outcomes are (positively and negatively) affected by the spectral range selected, (3) SAM and ED give nearly similar results and (4) for the same reason as in (2), the SCM is also more sensitive (again in positive and negative sense) to the spectral noise added. Results from the study of AVIRIS data show that SAM yields more spectral confusion (i.e., class overlap) than SID and SCM. In turn, SID is more effective in mapping the four target minerals than SCM as it clearly outperforms SCM when the target mineral coincides with the mineral phase on the ground. 相似文献
2.
Rama Rao Nidamanuri Bernd Zbell 《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(5):683-691
Recent developments in hyperspectral remote sensing technologies enable acquisition of image with high spectral resolution, which is typical to the laboratory or in situ reflectance measurements. There has been an increasing interest in the utilization of in situ reference reflectance spectra for rapid and repeated mapping of various surface features. Here we examined the prospect of classifying airborne hyperspectral image using field reflectance spectra as the training data for crop mapping. Canopy level field reflectance measurements of some important agricultural crops, i.e. alfalfa, winter barley, winter rape, winter rye, and winter wheat collected during four consecutive growing seasons are used for the classification of a HyMAP image acquired for a separate location by (1) mixture tuned matched filtering (MTMF), (2) spectral feature fitting (SFF), and (3) spectral angle mapper (SAM) methods. In order to answer a general research question “what is the prospect of using independent reference reflectance spectra for image classification”, while focussing on the crop classification, the results indicate distinct aspects. On the one hand, field reflectance spectra of winter rape and alfalfa demonstrate excellent crop discrimination and spectral matching with the image across the growing seasons. On the other hand, significant spectral confusion detected among the winter barley, winter rye, and winter wheat rule out the possibility of existence of a meaningful spectral matching between field reflectance spectra and image. While supporting the current notion of “non-existence of characteristic reflectance spectral signatures for vegetation”, results indicate that there exist some crops whose spectral signatures are similar to characteristic spectral signatures with possibility of using them in image classification. 相似文献
3.
Rama Rao Nidamanuri 《国际地球制图》2016,31(8):845-859
Modern hyperspectral imaging and non-imaging spectroradiometer has the capability to acquire high-resolution spectral reflectance data required for surface materials identification and mapping. Spectral similarity metrics, due to their mathematical simplicity and insensitiveness to the number of reference labelled spectra, have been increasingly used for material mapping by labelling reflectance spectra in hyperspectral data labelling. For a particular hyperspectral data set, the accuracy of spectral labelling depends considerably upon the degree of unambiguous spectral matching achieved by the spectral similarity metric used. In this work, we propose a new methodology for quantifying spectral similarity for hyperspectral data labelling for surface materials identification. Developed adopting the multiple classifier system architecture, the proposed methodology unifies into a single framework the differential performances of eight different spectral similarity metrics for the quantification of spectral matching for surface materials. The proposed methodology has been implemented on two types of hyperspectral data viz. image (airborne hyperspectral images) and non-image (library spectra) for numerous surface materials identification. Further, the performance of the proposed methodology has been compared with the support vector machines (SVM) approach, and with all the base spectral similarity metrics. The results indicate that, for the hyperspectral images, the performance of the proposed methodology is comparable with that of the SVM. For the library spectra, the proposed methodology shows a consistently higher (increase of about 30% when compared to SVM) classification accuracy. The proposed methodology has the potential to serve as a general library search method for materials identification using hyperspectral data. 相似文献
4.
The impact of band selection on endmember selection is seldom explored in the analysis of hyperspectral imagery. This study incorporates the N-dimensional Spectral Solid Angle (NSSA) band selection tool into the Spectral-Spatial Endmember Extraction (SSEE) tool to determine a band set that can be used to better define endmembers classes used in spectral mixture analysis. The incorporation aims to define a band set that improves the spectral contrast between endmembers at each step of the spatial-spectral endmember search and ultimately captures key features for discriminating spectrally similar materials. The proposed method (NSSA-SSEE) was evaluated for lithological mapping using a hyperspectral image encompassing a range of spectrally similar mafic and ultramafic rock units. The band selected by NSSA-SSEE showed a good agreement with known features of scene components identified by experts. Results showed an improvement in the selection of detailed endmembers, endmembers that are similar and that can be significant for mapping. The incorporation of NSSA into SSEE was feasible because both methods are well suited for this process. NSSA is one of the few methods of band selection that is suitable for the analysis of a small number of endmembers and SSEE provides such endmember sets via spatial subsetting. The automated NSSA-SSEE approach can reduce the need for field-based information to guide the feature selection process. 相似文献
5.
Originally developed to classify multispectral and hyperspectral images, spectral mapping methods were used to classify Light Detection and Ranging (LiDAR) data to estimate the vertical structure of vegetation for Fuel Type (FT) mapping. Three spectral mapping methods generated spatially comprehensive FT maps for Cabañeros National Park (Spain): (1) Spectral Mixture Analysis (SMA), (2) Spectral Angle Mapper (SAM), and (3) Multiple Endmember Spectral Mixture Analysis (MESMA). The Vegetation Vertical Profiles (VVPs) describe the vertical distribution of the vegetation and are used to define each FT endmember in a LiDAR signature library. Two different approaches were used to define the endmembers, one based on the field data collected in 1998 and 1999 (Approach 1) and the other on exploring spatial patterns of the singular FT discriminating factors (Approach 2). The overall accuracy is higher for Approach 2 and with best results when considering a five-FT model rather than a seven-FT model. The agreement with field data of 44% for MESMA and SMA and 40% for SAM is higher than the 38% of the official Cabañeros National Park FTs map. The principal spatial patterns for the different FTs were well captured, demonstrating the value of this novel approach using spectral mapping methods applied to LiDAR data. The error sources included the time gap between field data and LiDAR acquisition, the steep topography in parts of the study site, and the low LiDAR point density among others. 相似文献
6.
Mineral mapping is an important step for the development and utilization of mineral resources. The emergence of remote sensing technology, especially hyperspectral imagery, has paved a new approach to geological mapping. The k-means clustering algorithm is a classical approach to classifying hyperspectral imagery, but the influence of mixed pixels and noise mean that it usually has poor mineral mapping accuracy. In this study, the mapping accuracy of the k-means algorithm was improved in three ways: similarity measurement methods that are insensitive to dimensions are used instead of the Euclidean distance for clustering; the spectral absorption features of minerals are enhanced; and the mineral mapping results are combined as the number of cluster centers (K) is incremented from 1. The improved algorithm is used with combined spectral matching to match the clustering results with a spectral library. A case study on Cuprite, Nevada, demonstrated that the improved k-means algorithm can identify most minerals with the kappa value of over 0.8, which is 46% and 15% higher than the traditional k-means and spectral matching technology. New mineral types are more likely to be found with increasing K. When K is much greater than the number of mineral types, the accuracy is improved, and the mineral mapping results are independent of the similarity measurement method. The improved k-means algorithm can also effectively remove speckle noise from the mineral mapping results and be used to identify other objects. 相似文献
7.
基于小波分量特征值匹配的高光谱影像分类 总被引：1，自引：0，他引：1
提出了一种基于小波分量特征值的高光谱影像分类算法。针对每个像素构建一个能反映该分量特征的函数，得到其特征值。再利用这些特征值与参考光谱的特征值进行匹配，从而对整幅影像实现分类。实验证明，该方法比传统的光谱角制图法和交叉相关系数法的分类精度有较大提高。 相似文献
8.
A. Senthil Kumar V. Keerthi A.S. Manjunath Harald van der Werff Freek van der Meer 《International Journal of Applied Earth Observation and Geoinformation》2010
Classification of hyperspectral images has been receiving considerable attention with many new applications reported from commercial and military sectors. Hyperspectral images are composed of a large number of spectral channels, and have the potential to deliver a great deal of information about a remotely sensed scene. However, in addition to high dimensionality, hyperspectral image classification is compounded with a coarse ground pixel size of the sensor for want of adequate sensor signal to noise ratio within a fine spectral passband. This makes multiple ground features jointly occupying a single pixel. Spectral mixture analysis typically begins with pixel classification with spectral matching techniques, followed by the use of spectral unmixing algorithms for estimating endmembers abundance values in the pixel. The spectral matching techniques are analogous to supervised pattern recognition approaches, and try to estimate some similarity between spectral signatures of the pixel and reference target. In this paper, we propose a spectral matching approach by combining two schemes—variable interval spectral average (VISA) method and spectral curve matching (SCM) method. The VISA method helps to detect transient spectral features at different scales of spectral windows, while the SCM method finds a match between these features of the pixel and one of library spectra by least square fitting. Here we also compare the performance of the combined algorithm with other spectral matching techniques using a simulated and the AVIRIS hyperspectral data sets. Our results indicate that the proposed combination technique exhibits a stronger performance over the other methods in the classification of both the pure and mixed class pixels simultaneously. 相似文献
9.
In this study, we proposed an automated lithological mapping approach by using spectral enhancement techniques and Machine Learning Algorithms (MLAs) using Airborne Visible Infrared Imaging Spectroradiometer-Next Generation (AVIRIS-NG) hyperspectral data in the greenstone belt of the Hutti area, India. We integrated spectral enhancement techniques such as Principal Component Analysis (PCA) and Independent Component Analysis (ICA) transformation and different MLAs for an accurate mapping of rock types. A conjugate utilization of conventional geological map and spectral enhancement products derived from ASTER data were used for the preparation of a high-resolution reference lithology map. Feature selection and extraction methods were applied on the AVIRIS-NG data to derive different input dataset such as (a) all spectral bands, (b) shortwave infrared bands, (c) Joint Mutual Information Maximization (JMIM) based optimum bands, and (d) optimum bands using PCA, to choose optimum input dataset for automated lithological mapping. The comparative analysis of different MLAs shows that the Support Vector Machine (SVM) outperforms other Machine Learning (ML) models. The SVM achieved an Overall Accuracy (OA) and Kappa Coefficient (k) of 85.48% and 0.83, respectively, using JMIM based optimum bands. The JMIM based optimum bands were more suitable than other input datasets to classify most of the lithological units (i.e. metabasalt, amphibolite, granite, acidic intrusive and migmatite) within the study area . The sensitivity analysis performed in this study illustrates that the SVM is less sensitive to the number of samples and mislabeling in the model training than other MLAs. The obtained high-resolution classified map with accurate litho-contacts of amphibolite, metabasalt, and granite can be coupled with an alteration map of the area for targeting the potential zone of gold mineralization. 相似文献
10.
从高光谱遥感影像提取植被信息 总被引：2，自引：0，他引：2
遥感可以快速有效地监测大面积植被的种类、特性、长势等各类信息。高光谱遥感数据因其特有的高光谱分辨率特性使其在植被生态环境领域具有极大的应用潜力。植被信息作为生态环境评价的重要参数对区域生态环境的监测和建设具有重要的意义。本文基于云南省鹤庆县北衙的高光谱遥感数据用SAM方法对植被信息进行了提取,参考光谱使用ASD光谱辐射仪采集的植被光谱曲线。文中对高光谱遥感影像的辐射定标和大气校正进行了研究,针对影响光谱辐射仪采集的主要因素采取了相应的措施,并对光谱曲线分类及参考光谱曲线的选取进行了研究。将选取出的参考光谱曲线与大气校正后的遥感影像进行SAM匹配提取出植被信息,经过与实地调查资料比较并计算总体精度和kappa系数,计算结果达到预期精度。最后将分类结果转换为矢量图,经过投影转换为大地坐标后制作出北衙植被分布图。 相似文献
11.
K.C. Tiwari M.K. Arora D. Singh 《International Journal of Applied Earth Observation and Geoinformation》2011
Hyperspectral data acquired over hundreds of narrow contiguous wavelength bands are extremely suitable for target detection due to their high spectral resolution. Though spectral response of every material is expected to be unique, but in practice, it exhibits variations, which is known as spectral variability. Most target detection algorithms depend on spectral modelling using a priori available target spectra In practice, target spectra is, however, seldom available a priori. Independent component analysis (ICA) is a new evolving technique that aims at finding out components which are statistically independent or as independent as possible. The technique therefore has the potential of being used for target detection applications. A assessment of target detection from hyperspectral images using ICA and other algorithms based on spectral modelling may be of immense interest, since ICA does not require a priori target information. The aim of this paper is, thus, to assess the potential of ICA based algorithm vis a vis other prevailing algorithms for military target detection. Four spectral matching algorithms namely Orthogonal Subspace Projection (OSP), Constrained Energy Minimisation (CEM), Spectral Angle Mapper (SAM) and Spectral Correlation Mapper (SCM), and four anomaly detection algorithms namely OSP anomaly detector (OSPAD), Reed–Xiaoli anomaly detector (RXD), Uniform Target Detector (UTD) and a combination of Reed–Xiaoli anomaly detector and Uniform Target Detector (RXD–UTD) were considered. The experiments were conducted using a set of synthetic and AVIRIS hyperspectral images containing aircrafts as military targets. A comparison of true positive and false positive rates of target detections obtained from ICA and other algorithms plotted on a receiver operating curves (ROC) space indicates the superior performance of the ICA over other algorithms. 相似文献
12.
Successful retrieval of urban impervious surface area is achieved with remote sensing data using the multiple endmember spectral mixture analysis (MESMA). MESMA is well suited for studying the urban impervious surface area because it allows the number and types of the endmembers to vary on a per-pixel basis, thereby, allowing the control of the large spectral variability. However, MESMA must calculate all potential endmember combinations of each pixel to determine the best-fit one. Therefore, it is a time-consuming and inefficient unmixing technology, especially for hyperspectral images because these images have more complicated endmember categories. Hence, in this paper, we design an improved MESMA (SASD-MESMA: spectral angle and spectral distance MESMA) to enhance the computational efficiency of conventional MESMA, and we validate this new method by analyzing the Hyperion image (Jan-2011) and the field-spectra data of Guangzhou (China). In SASD-MESMA, the parameters of spectral angle (SA) and spectral distance (SD) are used to evaluate the similarity degree between library spectra and image spectra in order to identify the most representative endmember combination for each pixel. Results demonstrate that the SA and SD parameters are useful to reduce misjudgment in selecting candidate endmembers and effective for determining the appropriate endmembers in one pixel. Meanwhile, this research indicates that the proposed SASD-MESMA performs very well in retrieving impervious surface area, forest, grass and soil distributions on the sub-pixel level (the overall root mean square error (RMSE) is 0.15 and the correlation coefficient of determination (R2) is 0.68). 相似文献
13.
基于多光谱纹理“映射模式”概念，提出了基于光谱数据相似性的多光谱、高光谱数据的编码方法。利用光谱相似测度对不同类型的纹理进行编码，表征地物的全局纹理特征，将纹理提取的算法扩展到多维光谱图像分析中，提出了多尺度纹理组合算法。试验证明，该方法合理有效，可大大提高分类的准确性和精度。 相似文献
14.
高光谱遥感影像具有光谱分辨率极高的特点,承载了大量可区分不同类型地物的诊断性光谱信息以及区分亚类相似地物之间细微差别的光谱信息,在目标探测领域具有独特的优势。与此同时,高光谱遥感影像也带来了数据维数高、邻近波段之间存在大量冗余信息的问题,高维度的数据结构往往使得高光谱影像异常目标类和背景类之间的可分性降低。为了缓解上述问题,本文提出了一种基于波段选择的协同表达高光谱异常探测算法。首先,使用最优聚类框架对高光谱波段进行选择,获得一组波段子集来表示原有的全部波段,使得高光谱影像异常目标类与背景类之间的可分性增强。然后使用协同表达对影像上的像元进行重建,由于异常目标类和背景类之间的可分性增强,对异常目标像元进行协同表达时将会得到更大的残差,异常目标像元的输出值增大,可以更好地实现异常目标和背景类的分离。本文使用了3组高光谱影像数据进行异常目标探测实验,实验结果表明,该方法与其他现有高光谱异常目标探测算法对比,曲线下面积AUC(Area Under Curve)值更高,可以更好地实现异常目标与背景分离,能够更有效地对高光谱影像进行异常目标探测。 相似文献
15.
A new approach for dimensionality reduction of hyperspectral data has been proposed in this article. The method is based on extraction of fractal-based features from the hyperspectral data. The features have been generated using spectral fractal dimension of the spectral response curves (SRCs) after smoothing, interpolating and segmenting the curves. The new features so generated have then been used to classify hyperspectral data. Comparing the post classification accuracies with some other conventional dimensionality reduction methods, it has been found that the proposed method, with less computational complexity than the conventional methods, is able to provide classification accuracy statistically equivalent to those from conventional methods. 相似文献
16.
17.
Spectral feature fitting (SFF) is a commonly used strategy for hyperspectral imagery analysis to discriminate ground targets. Compared to other image analysis techniques, SFF does not secure higher accuracy in extracting image information in all circumstances. Multi range spectral feature fitting (MRSFF) from ENVI software allows user to focus on those interesting spectral features to yield better performance. Thus spectral wavelength ranges and their corresponding weights must be determined. The purpose of this article is to demonstrate the performance of MRSFF in oilseed rape planting area extraction. A practical method for defining the weighted values, the variance coefficient weight method, was proposed to set up criterion. Oilseed rape field canopy spectra from the whole growth stage were collected prior to investigating its phenological varieties; oilseed rape endmember spectra were extracted from the Hyperion image as identifying samples to be used in analyzing the oilseed rape field. Wavelength range divisions were determined by the difference between field-measured spectra and image spectra, and image spectral variance coefficient weights for each wavelength range were calculated corresponding to field-measured spectra from the closest date. By using MRSFF, wavelength ranges were classified to characterize the target's spectral features without compromising spectral profile's entirety. The analysis was substantially successful in extracting oilseed rape planting areas (RMSE ≤ 0.06), and the RMSE histogram indicated a superior result compared to a conventional SFF. Accuracy assessment was based on the mapping result compared with spectral angle mapping (SAM) and the normalized difference vegetation index (NDVI). The MRSFF yielded a robust, convincible result and, therefore, may further the use of hyperspectral imagery in precision agriculture. 相似文献
18.
19.
Xiaojun Qiao Deshuai Yuan Hui Li 《Journal of the Indian Society of Remote Sensing》2017,45(6):945-952
Shadow is an inevitable problem in high-resolution remote sensing images. There are need and significance in extracting information from shadow-covered areas, such as in land-cover mapping. Although the illumination energy of shadow pixels is low, hyperspectral image can provides rich enough band information to differentiate various urban targets/materials and to classify them. This study firstly analyzes the spectra difference between shadow and non-shadow classes so as to detect shadow-pixel. To classify the shadow pixels, Spectral Angle Mapper (SAM) method was adopted to classify urban land-cover mapping, because it can reduce the influence resulted from different illumination intensity. Then, training samples were collected among different classes from the shadow pixels, and their Jeffries–Matusita (J–M) distance were computed to validate the spectral separability among classes, with the square distances of J–M among classes all bigger than 1.9. Finally, Maximum Likelihood Classifier (MLC) and Support Vector Machine (SVM) classifier were used to classify all the shadow pixels as different land-cover types. The results showed MLC and SVM outperform the SAM in classifying similar classes. The classification result in SVM was validated to find having conformity with ground truth. 相似文献
20.
Understanding the Unique Spectral Signature of Winter Rape 总被引：1，自引：0，他引：1
Driven by significant technological developments in the hyperspectral imaging, material mapping using reference spectra has received renewed interest of the remote sensing community. The applicability of reference spectral signatures in image classification depends mainly on the material type and its spectral signature behaviour. Identification and spectral characterization of materials which exhibit unique spectral behaviour is the first step in this approach. Consequently there have been active researches for the identification of surface materials which exhibit unique spectral signatures. The uniqueness of reflectance signature of winter rape relative to its co-occurring crop species was reported in this study. Reflectance spectral libraries constructed from field spectral reflectance measurements collected over five agricultural crops (alfalfa, winter barley, winter rape, winter rye, and winter wheat) during four subsequent growing seasons were classified by the linear discriminant analysis (LDA). Further, the reference field spectral database was used for the spectral feature fitting and classification of a historical HyMAP airborne hyperspectral imagery acquired at a separate site, by spectral library search. Results indicate the existence of a meaningful spectral matching between image and field spectra for winter rape and demonstrate the potential for transferring spectral library for hyperspectral image classification. The observed consistency in the discrimination of winter rape demonstrates experimentally the fundamental principle of remote sensing which suggests the theoretical existence of unique spectral signatures for materials which can be incorporated as reference spectral signatures for hyperspectral image classification. 相似文献