首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The discharge hydrograph estimation in rivers based on reverse routing modeling and using only water level data at two gauged sections is here extended to the most general case of significant lateral flow contribution, without needing to deploy rainfall–runoff procedures. The proposed methodology solves the Saint‐Venant equations in diffusive form also involving the lateral contribution using a “head‐driven” modeling approach where lateral inflow is assumed to be function of the water level at the tributary junction. The procedure allows to assess the discharge hydrograph at ends of a selected river reach with significant lateral inflow, starting from the stage recorded there and without needing rainfall data. Specifically, the MAST 1D hydraulic model is applied to solve the diffusive wave equation using the observed stage hydrograph at the upstream section as upstream boundary condition. The other required data are (a) the observed stage hydrograph at the downstream section, as benchmark for the parameter calibration, and (b) the bathymetry of the river reach, from the upstream section to a short distance after the downstream gauged section. The method is validated with different flood events observed in two river reaches with a significant intermediate basin, where reliable rating curves were available, selected along the Tiber River, in central Italy, and the Alzette River, in Luxembourg. Very good performance indices are found for the computed discharge hydrographs at both the channel ends and along the tributaries. The mean Nash‐Sutcliffe value (NSq) at the channel ends of two rivers is found equal to 0.99 and 0.86 for the upstream and downstream sites, respectively. The procedure is also validated on a longer stretch of the Tiber River including three tributaries for which appreciable results are obtained in terms of NSq for the computed discharge hydrographs at both the channel ends for three investigated flood events.  相似文献   

2.
《水文科学杂志》2013,58(1):66-82
Abstract

An adaptive model for on-line stage forecasting is proposed for river reaches where significant lateral inflow contributions occur. The model is based on the Muskingum method and requires the estimation of four parameters if the downstream rating curve is unknown; otherwise only two parameters have to be determined. As the choice of the forecast lead time is linked to wave travel time along the reach, to increase the lead time, a schematization of two connected river reaches is also investigated. The variability of lateral inflow is accounted for through an on-line adaptive procedure. Calibration and validation of the model were carried out by applying it to different flood events observed in two equipped river reaches of the upper-middle Tiber basin in central Italy, characterized by a significant contributing drainage area. Even if the rating curve is unknown at the downstream section, the forecast stage hydrographs were found in good agreement with those observed. Errors in peak stage and time to peak along with the persistence coefficient values show that the model has potential as a practical tool for on-line flood risk management.  相似文献   

3.
Inverse Modeling Approach to Allogenic Karst System Characterization   总被引：2，自引：0，他引：2  
Allogenic karst systems function in a particular way that is influenced by the type of water infiltrating through river water losses, by karstification processes, and by water quality. Management of this system requires a good knowledge of its structure and functioning, for which a new methodology based on an inverse modeling approach appears to be well suited. This approach requires both spring and river inflow discharge measurements and a continuous record of chemical parameters in the river and at the spring. The inverse model calculates unit hydrographs and the impulse responses of fluxes from rainfall hydraulic head at the spring or rainfall flux data, the purpose of which is hydrograph separation. Hydrograph reconstruction is done using rainfall and river inflow data as model input and enables definition at each time step of the ratio of each component. Using chemical data, representing event and pre-event water, as input, it is possible to determine the origin of spring water (either fast flow through the epikarstic zone or slow flow through the saturated zone). This study made it possible to improve a conceptual model of allogenic karst system functioning. The methodology is used to study the Bas-Agly and the Cent Font karst systems, two allogenic karst systems in Southern France.  相似文献   

4.
The diffusive wave equation with inhomogeneous terms representing hydraulics with uniform or concentrated lateral inflow into a river is theoretically investigated in the current paper. All the solutions have been systematically expressed in a unified form in terms of response function or so called K-function. The integration of K-function obtained by using Laplace transform becomes S-function, which is examined in detail to improve the understanding of flood routing characters. The backwater effects usually resulting in the discharge reductions and water surface elevations upstream due to both the downstream boundary and lateral inflow are analyzed. With a pulse discharge in upstream boundary inflow, downstream boundary outflow and lateral inflow respectively, hydrographs of a channel are routed by using the S-functions. Moreover, the comparisons of hydrographs in infinite, semi-infinite and finite channels are pursued to exhibit the different backwater effects due to a concentrated lateral inflow for various channel types.  相似文献   

5.
Two models, one linear and one non‐linear, were employed for the prediction of flow discharge hydrographs at sites receiving significant lateral inflow. The linear model is based on a rating curve and permits a quick estimation of flow at a downstream site. The non‐linear model is based on a multilayer feed‐forward back propagation (FFBP) artificial neural network (ANN) and uses flow‐stage data measured at the upstream and downstream stations. ANN predicted the real‐time storm hydrographs satisfactorily and better than did the linear model. The results of sensitivity analysis indicated that when the lateral inflow contribution to the channel reach was insignificant, ANN, using only the flow‐stage data at the upstream station, satisfactorily predicted the hydrograph at the downstream station. The prediction error of ANN increases exponentially with the difference between the peak discharge used in training and that used in testing. ANN was also employed for flood forecasting and was compared with the modified Muskingum model (MMM). For a 4‐h lead time, MMM forecasts the floods reliably but could not be applied to reaches for lead times greater than the wave travel time. Although ANN and MMM had comparable performances for an 8‐h lead time, ANN is capable of forecasting floods with lead times longer than the wave travel time. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

6.
With increasing demands on limited water resources, regulation of larger river systems continues to increase and so too does the need for accurate water accounting and prediction in these systems. River system models are either calibrated manually or automatically on a reach‐by‐reach basis, i.e. each reach is calibrated as a separate entity with little or no consideration of fluxes at other locations within the river system. While this is a practical approach, simulation errors can propagate downstream to make calibration or prediction difficult at those locations. Likewise parameters may suffer from over‐fitting especially where observations are erroneous. We developed and implemented a system calibration strategy in a portion of the Murrumbidgee River, Australia, where parameters for 11 gauges (36 parameters) were calibrated together. Parameter values, model states and model goodness of fit were compared to reach‐by‐reach calibration. The system calibration produced a better goodness of fit across the whole system relative to reach‐by‐reach calibration. Additionally, model system states were more realistic than reach‐by‐reach optimized models. Over‐fitting was obvious using the reach‐by‐reach method for one reach/gauge in particular. This was avoided with system calibration method, with improved goodness of fit at all gauges downstream of the problem gauge. The results here suggest that the system calibration approach provides more hydrologically consistent states, improved overall fit and avoids over‐fitting at problem gauges. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

7.
A new methodology for predicting water quality values at discontinued water quality monitoring stations is proposed. The method is based upon the Principle of Maximum Entropy (POME) and provides unbiased predictions of water quality levels at upstream tributaries and on the mainstem of a river given observed changes in the distribution of the same water quality parameter at a downstream location. Changes in the values of water quality parameters which are known a priori to have occurred upstream, but which are not sufficiently large to account for all the observed change in the same water quality parameter at the downstream location are able to be incorporated in the method through the introduction of a new term in the basic entropy expression. Application of the procedure to water quality monitoring on the Mackenzie River in Queensland, Australia indicates the method has considerable potential for prediction of water quality at discontinued stations. The method also has potential for identifying the location of causes of observed changes in water quality at a downstream station.  相似文献   

8.
A new methodology for predicting water quality values at discontinued water quality monitoring stations is proposed. The method is based upon the Principle of Maximum Entropy (POME) and provides unbiased predictions of water quality levels at upstream tributaries and on the mainstem of a river given observed changes in the distribution of the same water quality parameter at a downstream location. Changes in the values of water quality parameters which are known a priori to have occurred upstream, but which are not sufficiently large to account for all the observed change in the same water quality parameter at the downstream location are able to be incorporated in the method through the introduction of a new term in the basic entropy expression. Application of the procedure to water quality monitoring on the Mackenzie River in Queensland, Australia indicates the method has considerable potential for prediction of water quality at discontinued stations. The method also has potential for identifying the location of causes of observed changes in water quality at a downstream station.  相似文献   

9.
In semiarid and arid environments, leakage from rivers is a major source of recharge to underlying unconfined aquifers. Differential river gauging is widely used to estimate the recharge. However, the methods commonly applied are limited in that the temporal resolution is event‐scale or longer. In this paper, a novel method is presented for quantifying both the total recharge volume for an event, and variation in recharge rate during an event from hydrographs recorded at the upstream and downstream ends of a river reach. The proposed method is applied to river hydrographs to illustrate the method steps and investigate recharge processes occurring in a sub‐catchment of the Murray Darling Basin (Australia). Interestingly, although it is the large flood events which are commonly assumed to be the main source of recharge to an aquifer, our analysis revealed that the smaller flow events were more important in providing recharge.  相似文献   

10.
The aim of this paper is to quantify peakflow attenuation and/or amplification in a river, investigating lateral flow from the intermediate catchment during floods. This is a challenge for the study of the hydrological response of permeable/intermittent streams, and our contribution refers to a modelling framework based on the inverse problem for the diffusive wave model applied in a karst catchment. Knowing the upstream and downstream hydrographs on a reach between two stations, we can model the lateral one, given information on the hydrological processes involved in the intermediate catchment. The model is applied to 33 flood events in the karst reach of the Iton River in French Normandy where peakflow attenuation is observed. The monitored zone consists of a succession of losing and gaining reaches controlled by strong surface‐water/groundwater (SW/GW) interactions. Our results show that despite a high baseflow increase in the reach, peakflow is attenuated. Model application shows that the intensity of lateral outflow for the flood component is linked to upstream discharge. A combination of river loss and overbank flow for highest floods is proposed for explaining the relationships. Our approach differentiates the role of outflow (river loss and overbank flow) and that of wave diffusion on peakflow attenuation. Based on several sets of model parameterization, diffusion is the main attenuation process for most cases, despite high river losses of up to several m3/s (half of peakflow for some parameterization strategies). Finally, this framework gives new insight into the SW/GW interactions during floods in karst basins, and more globally in basins characterized by disconnected river‐aquifer systems.  相似文献   

11.
Abstract

In a typical reservoir routing problem, the givens are the inflow hydrograph and reservoir characteristic functions. Flood attenuation investigations can be easily accomplished using a hydrological or hydraulic routing of the inflow hydrograph to obtain the reservoir outflow hydrograph, unless the inflow hydrograph is unavailable. Although attempts for runoff simulation have been made in ungauged basins, there is only a limited degree of success in special cases. Those approaches are, in general, not suitable for basins with a reservoir. The objective of this study is to propose a procedure for flood attenuation estimation in ungauged reservoir basins. In this study, a kinematic-wave based geomorphic IUH model was adopted. The reservoir inflow hydrograph was generated through convolution integration using the rainfall excess and basin geomorphic information. Consequently, a fourth-order Runge-Kutta method was used to route the inflow hydrograph to obtain the reservoir outflow hydrograph without the aid of recorded flow data. Flood attenuation was estimated through the analysis of the inflow and outflow hydrographs of the reservoir. An ungauged reservoir basin in southern Taiwan is presented as an example to show the applicability of the proposed analytical procedure. The analytical results provide valuable information for downstream flood control work for different return periods.  相似文献   

12.
Motovilov  Yu. G.  Suchkova  K. V. 《Water Resources》2018,45(1):135-145
  相似文献   

13.
ROGER MOUSSA 《水文研究》1996,10(9):1209-1227
The diffusive wave equation is generally used in flood routing in rivers. The two parameters of the equation, celerity and diffusivity, are usually taken as functions of the discharge. If these two parameters can be assumed to be constant without lateral inflow, the diffusive wave equation may have an analytical solution: the Hayami model. A general analytical method, based on ‘Hayami’s hypothesis, is developed here which resolves the diffusive wave flood routing equation with lateral inflow or outflow uniformly distributed over a channel reach. Flood routing parameters are then identified using observed inflow and outflow and the Hayami model used to simulate outflow. Two examples are discussed. Firstly, the prediction of the hydrograph at a downstream section on the basis of a knowledge of the hydrograph at an upstream section and the lateral inflow. The second example concerns lateral inflow identification between an upstream and a downstream section on the basis of a knowledge of hydrographs at the upstream and downstream sections. The new general Hayami model was applied to flood routing simulation and for lateral inflow identification of the River Allier in France. The major advantages of the method relate to computer simulation, real-time forecasting and control applications in examples where numerical instabilities, in the solution of the partial differential equations must be avoided.  相似文献   

14.
In this paper, optimal operating rules for water quality management in reservoir–river systems are developed using a methodology combining a water quality simulation model and a stochastic GA-based conflict resolution technique. As different decision-makers and stakeholders are involved in the water quality management in reservoir–river systems, a new stochastic form of the Nash bargaining theory is used to resolve the existing conflict of interests related to water supply to different demands, allocated water quality and waste load allocation in downstream river. The expected value of the Nash product is considered as the objective function of the model which can incorporate the inherent uncertainty of reservoir inflow. A water quality simulation model is also developed to simulate the thermal stratification cycle in the reservoir, the quality of releases from different outlets as well as the temporal and spatial variation of the pollutants in the downstream river. In this study, a Varying Chromosome Length Genetic Algorithm (VLGA), which has computational advantages comparing to other alternative models, is used. VLGA provides a good initial solution for Simple Genetic Algorithms and comparing to Stochastic Dynamic Programming (SDP) reduces the number of state transitions checked in each stage. The proposed model, which is called Stochastic Varying Chromosome Length Genetic Algorithm with water Quality constraints (SVLGAQ), is applied to the Ghomrud Reservoir–River system in the central part of Iran. The results show, the proposed model for reservoir operation and waste load allocation can reduce the salinity of the allocated water demands as well as the salinity build-up in the reservoir.  相似文献   

15.
A novel methodology for simultaneous discharge and channel roughness estimation is developed and applied to data sets available at three experimental sites. The methodology is based on the synchronous measurement of water level data in two river sections far some kilometers from each other, as well as on the use of a diffusive flow routing solver and does not require any direct velocity measurement. The methodology is first analyzed for the simplest case of a channel with a large slope, where the kinematic assumption holds. A sensitivity and a model error analysis are carried out in this hypothesis in order to show the stability of the results with respect to the error in the input parameters in the case of homogeneous roughness and to analyze the effect of unknown roughness heterogeneity on the estimated discharges. The methodology is then extended to the more general case of channels with mild slope and validated using field data previously collected in three Italian rivers: the Arno (in Tuscany), the Tiber (in Latium) and the Vallo di Diana, a small tributary of the Tanagro river (in Southern Italy). The performance of the proposed algorithm has been investigated according to three performance criteria estimating the quality of the match between the measured and the computed stage and discharge hydrographs. Results of the field tests can be considered good, despite the uncertainties of the field data and of the measured values.  相似文献   

16.
Abstract

In the first part of this study, a flood wave transformation analysis for the largest historical floods in the Danube River reach Kienstock–Bratislava was carried out. For the simulation of the historical (1899 and 1954) flood propagation, the nonlinear river model NLN-Danube (calibrated on the recent river reach conditions) was used. It was shown that the simulated peak discharges were not changed significantly when compared to their historical counterparts. However, the simulated hydrographs exhibit a significant acceleration of the flood wave movement at discharges of between 5000 and 9000 m3 s-1. In the second part, the travel time-water level relationships between Kienstock and Bratislava were analysed on a dataset of the flood peak water levels for the period 1991–2002. An empirical regression routing scheme for the Danube short-term water level forecast at Bratislava station was derived. This is based on the measured water level at Kienstock gauging station.  相似文献   

17.
The applicability of a procedure, developed previously for evaluating runoff hydrographs of northern rivers, to the largest Russian river—the Lena—which flows under severe conditions of the Northeastern Siberia, is examined. The procedure is based on the land surface model SWAP in combination with input data derived from global databases of land surface parameters and meteorological forcing data derived from observations at meteorological stations located in the basins of the rivers or near them. Also studied was the ability of the model SWAP to reproduce the many-year dynamics of the values of snow water equivalent averaged over the Lena basin and their distribution over the basin area.  相似文献   

18.
ABSTRACT

Due to more frequent extreme rainfall incidents in recent years, many large cities are considering the construction of new drainage systems to cope with rainfall in the order of 100-year events. In such cases, T-year point rainfall events should be supplemented with areal reduction factors (ARF) to avoid overdesign. To facilitate an initial design, a procedure based on using Chicago Design Storms (CDS) in combination with intensity–duration–area (IDA) curves was developed to produce CDS-ARF input rainfall. By means of the time of concentration, a specific instantaneous unit hydrograph (IUH) was obtained for each subcatchment. Combination of CDS-ARF rains and the subcatchment IUHs using convolution integrals was used to produce inflow hydrographs to the drainage system. A sequential design procedure that successively includes subcatchments for the entire drainage system in the downstream direction is implemented and exemplified ensuring a consistent initial design.  相似文献   

19.
Stream power can be an extremely useful index of fluvial sediment transport, channel pattern, river channel erosion and riparian habitat development. However, most previous studies of downstream changes in stream power have relied on field measurements at selected cross‐sections, which are time consuming, and typically based on limited data, which cannot fully represent important spatial variations in stream power. We present here, therefore, a novel methodology we call CAFES (combined automated flood, elevation and stream power), to quantify downstream change in river flood power, based on integrating in a GIS framework Flood Estimation Handbook systems with the 5 m grid NEXTMap Britain digital elevation model derived from IFSAR (interferometric synthetic aperture radar). This provides a useful modelling platform to quantify at unprecedented resolution longitudinal distributions of flood discharge, elevation, floodplain slope and flood power at reach and basin scales. Values can be resolved to a 50 m grid. CAFES approaches have distinct advantages over current methodologies for reach‐ and basin‐scale stream power assessments and therefore for the interpretation and prediction of fluvial processes. The methodology has significant international applicability for understanding basin‐scale hydraulics, sediment transport, erosion and sedimentation processes and river basin management. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

20.
One of the main purposes of a water balance study is to evaluate the net available water resources, both on the surface and in the subsurface. Water balance models that simulate hydrographs of river flow on the basis of available meteorological data would be a valuable tool in the hands of the planners and designers of water resources systems. In this paper, a set of simple monthly snow and water balance models has been developed and applied to regional water balance studies in the NOPEX area. The models require as input monthly areal precipitation, monthly long-term average potential evapotranspiration and monthly mean air temperature. The model outputs are monthly river flow and other water balance components, such as actual evapotranspiration, slow and fast components of river flow, snow accumulation and melting. The results suggest that the proposed model structure is suitable for water balance study purposes in seasonally snow-covered catchments located in the region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号