共查询到20条相似文献，搜索用时 31 毫秒
1.
基于混合光谱分解的城市不透水面分布估算 总被引：10，自引：0，他引：10
城市化的一个重要表现就是不透水面分布比率的上升,城市内部不透水面分布是城市生态环境的一个重要指标。对于规模较大的大城市,采用高性价比的中等分辨率影像,获取不透水面的分布,是当前国际研究的一个热点。本研究利用Landsat 7的ETM 影像,在线性光谱分解的技术上,提取了上海市的不透水面分布并对其空间特征进行了分析。研究揭示,ETM 影像对于城市尺度的信息提取,其成本是较低的;对于城市地域来说,利用植被、高反照度、低反照度和裸露的土壤四种最终光谱端元的线性组合,可以较好地模拟ETM 波谱特征,而除了水面以外的高反照度、低反照度两种最终光谱端元,可以较好地表达城市不透水表面信息。结果显示,利用中等分辨率影像对上海中心城区不透水面分布提取的精度还是令人满意的,总体上,上海市不透水面分布比率较高,不透水面分布的空间差异进一步揭示了城市土地覆被空间结构以及城市空间扩展的差异性。 相似文献
2.
泰安市区不透水面覆盖度遥感估算研究 总被引：2，自引：1，他引：1
区域不透水面覆盖度是该区域城镇化程度、生态环境状况的重要指示因子。针对传统线性混合像元分解丰度图经常出现负值或者大于1的情况,采用完全约束最小二乘混合像元分解方法,利用泰安市市区Landsat8 OLI遥感影像提取了其不透水面分布状况,运用高分辨率遥感影像随机采样进行了精度检验,并对该区域不透水面空间特征进行了分析。结果表明:该文方法对泰安市市区不透水面分布提取的精度较高;植被、水体、高和低反照率不透水面4种光谱端元的线性组合,可以较好地模拟OLI影像的波谱特征;高、低反照率不透水面两种光谱端元可以很好地表达泰安市市区不透水面信息。 相似文献
3.
城市不透水表面遥感估算研究 总被引：4，自引：0，他引：4
作为城市化水平的关键指示因子，不透水表面已经被广泛应用在城市生态环境评估中。利用TM影像，采用附有限制条件的线性光谱混合模型对北京城区的不透水表面分布进行空间分析。通过高反照率、低反照率、植被及土壤4类光谱端元的线性组合表征城市土地覆盖类型，综合剔除噪声影响后的高、低反照率分量，估算北京城区不透水表面分布。研究结果表明：利用附有限制条件的线性光谱分解得到的RMS平均值为0．003428。其不透水表面分布结果与同期spot-5对比验证，R2为0．932，均方根误差为0．086，结果令人满意。 相似文献
4.
以2001年7月11日LandsatETM7影像和2009年7月16日TM影像为数据源,基于V-I-S理论模型,采用归一化光谱分解模型提取了乌鲁木齐市区范围内2个时段的植被、土壤、不透水层3个连续地表参数分量。通过对不透水层不同阈值的划分,提取了2时段的乌鲁木齐市城市发展的空间信息,结果较为满意;通过空间叠加计算方式获取了8年来乌鲁木齐市城市化发展的空间信息和主要拓展方向。结果表明,乌鲁木齐城市化发展速度较快,特别是北扩趋势显著。 相似文献
5.
CBERS-02B多光谱数据在城市不透水面
估算中的可用性研究 总被引：2，自引：0，他引：2
以厦门岛为研究区,以CBERS-02B的CCD影像为数据源,采用基于可变端元的线性光谱混合模型估算了城市不
透水面组分含量,并探讨了该方法的实现过程与优势。通过端元评估确定了研究区的４个典型端元,即高反射不透水
面、低反射不透水面、高反射土壤和植被。在此基础上,以高、低反射不透水面端元的组分含量对城市不透水面含量
进行估算。精度评价结果显示：基于可变端元的方法要优于一般带全约束法;而在混合像元分解过程中加入全色波段
（band5）有助于提高模型估算精度,使得在像元尺度的精度与采用Landsat的已有报道相近,而在土地利用单元尺度实
现了对城市不透水面的无偏估计。研究实例也表明,尽管目前CBERS-02B数据在辐射定标和地理定位等方面还有待改
进,通过采用适当的处理过程和技术手段,依然能利用该数据对城市不透水面进行有效估算。 相似文献
6.
Classification and regression tree (CART) has been widely implemented to estimate impervious surface, an important indicator of urbanization and environmental quality. Although the CART algorithm gains higher overall accuracy than linear regression models, only very few studies have noticed that reliability of CART is affected by systematic errors. Especially, CART typically overestimates impervious surfaces in low-density urban areas and underestimates them in high-density urban areas. The primary objective of this study is to develop an improved integrated method to estimate impervious surface with higher accuracy by reducing the systematic errors of CART. This improved method was applied to three urban areas, Chicago (United States), Venice (Italy), and Guangzhou (China) to examine its effectiveness. When compared with the conventional CART, overall mean average error (MAE) and root mean square error (RMSE) of improved method are decreased by 22.64% and 20.93%, respectively, and R2 rises from 0.9 to 0.96. In high-density impervious surfaces, where intensely developed urban area is located, the MAE and RMSE for the improved method are 0.066 and 0.088, respectively, largely improved from 0.100 to 0.130. Since accurate estimation of high-density impervious surfaces is the fundamental issue for monitoring and understanding the urban environment, the improved method demonstrated in this study is significant. 相似文献
7.
8.
基于ETM+的植被覆盖信息提取及其动态变化分析——以广州市为例 总被引：2，自引：0，他引：2
以2000年和2005年ETM+影像为数据源,在水体掩膜和端元光谱优选对比基础上,利用线性光谱模型提取了广州市植被覆盖信息,并对植被覆盖信息的时空动态变化进行了定量分析,结果表明:应用线性光谱模型之前对所占面积不大的水体进行处理是非常必要的,选取植被、硬化地面、土壤三端元法比包含阴影的四端元法更有利于线性光谱分离,而且能达到很高的精度;此外,通过对植被覆盖信息空间结构和景观格局的研究,显示:2000-2005虽然广州市绿化取得了初步成效,但总体植被覆盖状况呈下滑趋势,植被景观破碎程度增加,各植被景观形状趋于复杂化,城市化的发展加之人类活动的干扰,低植被覆盖区不断扩大,而中、高植被覆盖区正处于不断退化时期。 相似文献
9.
This study developed an analytical procedure based upon a spectral unmixing model for characterizing and quantifying urban landscape changes in Indianapolis, Indiana, the United States, and for examining the environmental impact of such changes on land surface temperatures (LST). Three dates of Landsat TM/ETM+ images, acquired in 1991, 1995, and 2000, respectively, were utilized to document the historical morphological changes in impervious surface and vegetation coverage and to analyze the relationship between these changes and those occurred in LST. Three fraction endmembers, i.e., impervious surface, green vegetation, and shade, were derived with an unconstrained least-squares solution. A hybrid classification procedure, which combined maximum-likelihood and decision-tree algorithms, was developed to classify the fraction images into land use and land cover classes. Correlation analyses were conducted to investigate the changing relationships of LST with impervious surface and vegetation coverage. Results indicate that multi-temporal fraction images were effective for quantifying the dynamics of urban morphology and for deriving a reliable measurement of environmental variables such as vegetation abundance and impervious surface coverage. Urbanization created an evolved inverse relationship between impervious and vegetation coverage, and brought about new LST patterns because of LST's correlations with both impervious and vegetation coverage. Further researches should be directed to refine spectral mixture modeling by stratification, and by the use of multiple endmembers and hyperspectral imagery. 相似文献
10.
Quantifying impervious surfaces in urban and suburban areas is a key step toward a sustainable urban planning and management strategy. With the availability of fine-scale remote sensing imagery, automated mapping of impervious surfaces has attracted growing attention. However, the vast majority of existing studies have selected pixel-based and object-based methods for impervious surface mapping, with few adopting sub-pixel analysis of high spatial resolution imagery. This research makes use of a vegetation-bright impervious-dark impervious linear spectral mixture model to characterize urban and suburban surface components. A WorldView-3 image acquired on May 9th, 2015 is analyzed for its potential in automated unmixing of meaningful surface materials for two urban subsets and one suburban subset in Toronto, ON, Canada. Given the wide distribution of shadows in urban areas, the linear spectral unmixing is implemented in non-shadowed and shadowed areas separately for the two urban subsets. The results indicate that the accuracy of impervious surface mapping in suburban areas reaches up to 86.99%, much higher than the accuracies in urban areas (80.03% and 79.67%). Despite its merits in mapping accuracy and automation, the application of our proposed vegetation-bright impervious-dark impervious model to map impervious surfaces is limited due to the absence of soil component. To further extend the operational transferability of our proposed method, especially for the areas where plenty of bare soils exist during urbanization or reclamation, it is still of great necessity to mask out bare soils by automated classification prior to the implementation of linear spectral unmixing. 相似文献
11.
Successful retrieval of urban impervious surface area is achieved with remote sensing data using the multiple endmember spectral mixture analysis (MESMA). MESMA is well suited for studying the urban impervious surface area because it allows the number and types of the endmembers to vary on a per-pixel basis, thereby, allowing the control of the large spectral variability. However, MESMA must calculate all potential endmember combinations of each pixel to determine the best-fit one. Therefore, it is a time-consuming and inefficient unmixing technology, especially for hyperspectral images because these images have more complicated endmember categories. Hence, in this paper, we design an improved MESMA (SASD-MESMA: spectral angle and spectral distance MESMA) to enhance the computational efficiency of conventional MESMA, and we validate this new method by analyzing the Hyperion image (Jan-2011) and the field-spectra data of Guangzhou (China). In SASD-MESMA, the parameters of spectral angle (SA) and spectral distance (SD) are used to evaluate the similarity degree between library spectra and image spectra in order to identify the most representative endmember combination for each pixel. Results demonstrate that the SA and SD parameters are useful to reduce misjudgment in selecting candidate endmembers and effective for determining the appropriate endmembers in one pixel. Meanwhile, this research indicates that the proposed SASD-MESMA performs very well in retrieving impervious surface area, forest, grass and soil distributions on the sub-pixel level (the overall root mean square error (RMSE) is 0.15 and the correlation coefficient of determination (R2) is 0.68). 相似文献
12.
Abstract This paper describes the first stage of an experiment aiming to evaluate the potential and limitations of MIVIS data for mapping the degradational state of soils in a sub‐scene of a southern Apennines study area (Italy). After radiometric rectification of the image data and the collection of a field/laboratory spectral library, linear spectral mixture modelling (SMA) was used to decompose image spectra into fractions of spectrally distinct mixing components. Spectral endmember selection was based upon a principal component analysis (PCA) applied to a set of soil spectra, collected from the spectral library. The resulting abundance estimates (fractions) trough SMA were then analysed to identify soil conditions and to obtain an improved measure of dry and green vegetation cover. A map of soil conditions and dry‐green vegetation abundance, based upon MIVIS data was then derived from normalised fractions of soil‐vegetation endmembers obtained from SMA. 相似文献
13.
A geostatistical temporal mixture analysis approach to address endmember variability for estimating regional impervious surface distributions 总被引：1，自引：0，他引：1
Wenliang Li 《地理信息系统科学与遥感》2016,53(1):102-121
Spectral mixture analysis (SMA) is a major approach for estimating fractional land covers through modeling the relationship between the spectral signatures of a mixed remote sensing pixel and those of the comprised pure land covers (also termed as endmembers). When SMA is implemented, endmember variability has proven to have significant impact on the accuracy of land cover fraction estimates. To address the endmember variability problem, this article developed a geostatistical temporal mixture analysis (GTMA) technique, with which spatially varying per-pixel endmember sets were estimated using an ordinary kriging interpolation technique. The method was applied to time-series moderate-resolution imaging spectroradiometer normalized difference vegetation index imagery in Wisconsin and North Carolina, United States to estimate regional impervious surface distributions. Analysis of results suggests that GTMA has achieved a promising accuracy. Detailed analysis indicates that a better performance has been achieved in less-developed areas than developed areas, and slight underestimation and slight overestimation have been detected in developed areas and less-developed areas, respectively. Moreover, while the performance of GTMA is comparable to those of phenology-based TMA and phenology-based multiple endmember TMA over the entire study area and in less-developed areas, a much better performance has been achieved in developed areas. Finally, this article argues that endmember variability may be more essential in developed areas when compared to less-developed areas. 相似文献
14.
利用雷达干涉数据进行城市不透水层百分比估算 总被引：2，自引：0，他引：2
人工不透水层是城市地区的重要特征.作为城市生态环境的关键指数,不透水层百分比(Impervious Surfaces Percentage, ISP)常用于城市水文过程模拟、水质面源污染及城市专题制图等研究中.本文利用ERS-1/2 重复轨道雷达干涉数据,采用分类与回归树(CART)算法探究了雷达遥感在城市ISP估算中的可行性和潜力,并与SPOT5 HRG光学遥感图像的估算结果进行了分析比较.香港九龙港岛实验区的初步研究结果表明,雷达干涉数据在城市不透水层研究中具有一定的应用潜力,特别是裸土和稀疏植被的ISP估算结果要好于光学遥感,这主要得益于雷达干涉数据(特别是长时间相干图像)在人工建筑物和裸土或稀疏植被之间具有很强的区分能力,另外,雷达干涉数据和光学遥感数据间的融合能够提高ISP估算精度. 相似文献
15.
16.
运用归一化光谱混合模型分析城市地表组成 总被引：7，自引：1，他引：7
运用归一化光谱混合分析(NSMA)方法,用ETM 数据调查广州市海珠区城市地表组成,采用亮度标准化方法减小亮度变化。通过标准化,使亮度差异在每个植被-非渗透性表面-土壤-水体(V-I-S-W)组成中减小或者消除,这样使得一个单一的端元能够代表一种地表组分。在此基础上,通过归一化影像,选择了植被、非渗透性表面、土壤和水体4种端元,运用一种约束光谱混合分析(SMA)模型,分解了不同种类的城市地表组成。通过与已有模型计算结果比较,认为本文所构建的模型较优,其对研究区非渗透性表面估计的均方根误差为12.6%。 相似文献
17.
Linear spectral mixture analysis (LSMA) is widely employed in impervious surface estimation, especially for estimating impervious surface abundance in medium spatial resolution images. However, it suffers from a difficulty in endmember selection due to within-class spectral variability and the variation in the number and the type of endmember classes contained from pixel to pixel, which may lead to over or under estimation of impervious surface. Stratification is considered as a promising process to address the problem. This paper presents a stratified spectral mixture analysis in spectral domain (Sp_SSMA) for impervious surface mapping. It categorizes the entire data into three groups based on the Combinational Build-up Index (CBI), the intensity component in the color space and the Normalized Difference Vegetation Index (NDVI) values. A suitable endmember model is developed for each group to accommodate the spectral variation from group to group. The unmixing into the associated subset (or full set) of endmembers in each group can make the unmixing adaptive to the types of endmember classes that each pixel actually contains. Results indicate that the Sp_SSMA method achieves a better performance than full-set-endmember SMA and prior-knowledge-based spectral mixture analysis (PKSMA) in terms of R, RMSE and SE. 相似文献
18.
Originally developed to classify multispectral and hyperspectral images, spectral mapping methods were used to classify Light Detection and Ranging (LiDAR) data to estimate the vertical structure of vegetation for Fuel Type (FT) mapping. Three spectral mapping methods generated spatially comprehensive FT maps for Cabañeros National Park (Spain): (1) Spectral Mixture Analysis (SMA), (2) Spectral Angle Mapper (SAM), and (3) Multiple Endmember Spectral Mixture Analysis (MESMA). The Vegetation Vertical Profiles (VVPs) describe the vertical distribution of the vegetation and are used to define each FT endmember in a LiDAR signature library. Two different approaches were used to define the endmembers, one based on the field data collected in 1998 and 1999 (Approach 1) and the other on exploring spatial patterns of the singular FT discriminating factors (Approach 2). The overall accuracy is higher for Approach 2 and with best results when considering a five-FT model rather than a seven-FT model. The agreement with field data of 44% for MESMA and SMA and 40% for SAM is higher than the 38% of the official Cabañeros National Park FTs map. The principal spatial patterns for the different FTs were well captured, demonstrating the value of this novel approach using spectral mapping methods applied to LiDAR data. The error sources included the time gap between field data and LiDAR acquisition, the steep topography in parts of the study site, and the low LiDAR point density among others. 相似文献
19.
Abstract Wildfire is a major disturbance agent in Mediterranean Type Ecosystems (MTEs). Providing reliable, quantitative information on the area of burns and the level of damage caused is therefore important both for guiding resource management and global change monitoring. Previous studies have successfully mapped burn severity using remote sensing, but reliable accuracy has yet to be gained using standard methods over different vegetation types. The objective of this research was to classify burn severity across several vegetation types using Landsat ETM imagery in two areas affected by wildfire in southern California in June 1999. Spectral mixture analysis (SMA) using four reference endmembers (vegetation, soil, shade, non‐photosynthetic vegetation) and a single (charcoal‐ash) image endmember were used to enhance imagery prior to burn severity classification using decision trees. SMA provided a robust technique for enhancing fire‐affected areas due to its ability to extract sub‐pixel information and minimize the effects of topography on single date satellite data. Overall kappa classification accuracy results were high (0.71 and 0.85, respectively) for the burned areas, using five canopy consumption classes. Individual severity class accuracies ranged from 0.5 to 0.94. 相似文献
20.
由于人口快速增长和农村人口向城市迁移,城市不透水面积也在持续快速增长。加速的城市扩张和无监控的城市开发会导致诸多生态环境问题。本文利用Landsat影像,采用附有限制条件的线性光谱混合分解、植被覆盖度与不透水面负相关模型、监督分类三种方法对南京城区的不透水表面分布进行空间分析。通过评估这三种方法提取的不透水面的精度和分析和种方法受其主要人为因素的影响大小以及不透水面的提取过程,表明了线性光谱混合分解方法较优。 相似文献