共查询到20条相似文献，搜索用时 578 毫秒
1.
Gopal Chakrabarti Debashish Shome Blanca Bauluz Subhajit Sinha 《Journal of the Geological Society of India》2009,74(1):119-130
Geochemical analysis for the Mesoproterozoic clastic sedimentary rocks of the basal Gulcheru Formation of the Cuddapah Basin
in the Gugudu-Dadithota-Parnapalle-Palkonda region (extending atleast 40 km) have been performed to highlight their provenance
and weathering history. The low K2O/Al2O3 ratios of the representative samples points to the recycled nature of sediments and illite clay in the sediments indicate
an overall cold climate (low chemical weathering degree). All the provenance diagrams indicate a mixed source of the Gulcheru
sediments with felsic dominancy and Upper continental crust (UCC) signature. 相似文献
2.
Mohammad KHANEHBAD Reza MOUSSAVI-HARAMI Asadollah MAHBOUBI Mehdi NADJAFI Mohammad Hosein MAHMUDY GHARAIE 《《地质学报》英文版》2012,86(5):1200-1210
Geochemical analysis of sandstones from the Sardar Formation (from two stratigraphic successions) in east-central Iran were used for identification of geochemical characterization of sandstones, provenance and tectonic setting. Sandstones in the two lithostratigraphic successions have similar chemical compositions suggesting a common provenance. Bulk-rock geochemistry analysis of Carboniferous sandstones from Sardar Formation indicates that they are mainly quartz dominated and are classified as quartzarenites, sublitharenites and subarkoses, derived from acid igneous to intermediate igneous rocks. Discrimination function analysis indicates that the sandstones of Sardar Formation were derived from quartzose sedimentary provenance in a recycled orogenic setting. Also, major and trace elements in sandstones of Sardar Formation (e.g., K2O/Na2O vs. SiO2) indicate deposition in a stable passive continental margin (PM). Chemical index of alteration (CIA) for these rocks (> 65%) suggests a moderate to relatively high degree of weathering in the source area. 相似文献
3.
Akhtar R. Mir V. Balaram Javid A. Ganai Shamim A. Dar A. Keshav Krishna 《中国地球化学学报》2016,35(4):428-436
The geochemical characteristics of two sections—the Permian–Triassic boundary (PTB) Guryul Ravine section, Kashmir Valley, Jammu and Kashmir, India; and the Attargoo section, Spiti Valley, Himachal Pradesh, India—have been studied in the context of provenance, paleo-weathering, and plate tectonic setting. These sections represent the siliciclastic sedimentary sequence from the Tethys Himalaya. The PTB siliciclastic sedimentary sequence in these regions primarily consists of sandstones and shales with variable thickness. Present studied sandstones and shales of both sections had chemical index of alteration values between 65 and 74; such values reveal low-to-moderate degree of chemical weathering. The chemical index of weathering in studied samples ranged from 71 to 94, suggesting a minor K-metasomatism effect on these samples. Plagioclase index of alteration in studied sections ranged from 68 to 92, indicating a moderate degree of weathering of plagioclase feldspars. The provenance discriminant function diagram suggests that the detritus involved in the formation of present studied siliciclastic sedimentary rocks fall in quartzose sedimentary and felsic igneous provenances. These sediments were deposited in a passive continental margin plate tectonic setting according to their location on a Si2O versus K2O/Na2O tectonic setting diagram. 相似文献
4.
大兴安岭中南段上二叠统林西组发育厚层的暗色泥页岩,是区域上重要的上古生界生烃层系之一。阿鲁科尔沁旗陶海营子剖面是林西组的典型剖面之一,本文以该剖面为研究对象,对取自该剖面林西组的10件砂、泥岩样品进行主量元素、微量元素和稀土元素测试分析。剖面样品元素分析和物源判别函数（F1-F2）、Ni-TiO2、La/Th-Hf图解判别结果表明,陶海营子剖面林西组沉积物来源多样,主要来源于上地壳长英质火成物源区和石英岩沉积物源区,还有少量来自中、基性岩火成物源区。剖面样品微量元素PAAS（后太古庙澳大利亚页岩）标准化蛛网图、稀土元素球粒陨石标准化配分模式图、K2O/Na2O-SiO2、Zr/Th、TiO2-（TFe2O3+MgO）图解、物源构造背景判别函数（F1-F2）''的分析判别和剖面样品与不同构造环境砂岩地球化学参数对比结果表明,陶海营子剖面林西组物源构造背景具有被动大陆边缘、活动大陆边缘和大陆岛弧特征,构造背景较复杂。综合分析可知,陶海营子剖面林西组物源主要为被动大陆边缘背景下的火成岩、石英质沉积岩,以及活动大陆边缘和大陆岛弧背景下的火成岩。结合前人相关研究成果,推测兴蒙造山带内伸展作用背景下的晚石炭世-二叠纪岩浆型被动陆缘沉积建造和与俯冲背景有关的古生代弧岩浆岩应该是陶海营子剖面林西组的主要物源。 相似文献
5.
6.
Statistical empirical index of chemical weathering in igneous rocks: A new tool for evaluating the degree of weathering 总被引：6，自引：0，他引：6
Chemical weathering indices are useful tools in characterizing weathering profiles and determining the extent of weathering. However, the predictive performance of the conventional indices is critically dependent on the composition of the unweathered parent rock. To overcome this limitation, the present paper introduces an alternative statistical empirical index of chemical weathering that is extracted by the principal component analysis (PCA) of a large dataset derived from unweathered igneous rocks and their weathering profiles. The PCA analysis yields two principal components (PC1 and PC2), which capture 39.23% and 35.17% of total variability, respectively. The extent of weathering is reflected by variation along PC1, primarily due to the loss of Na2O and CaO during weathering. In contrast, PC2 is the direction along which the projections of unweathered felsic, intermediate and mafic igneous rocks appear to be best discriminated; therefore, PC1 and PC2 represent independent latent variables that correspond to the extent of weathering and the chemistry of the unweathered parent rock. Subsequently, PC1 and PC2 were then mapped onto a ternary diagram (MFW diagram). The M and F vertices characterize mafic and felsic rock source, respectively, while the W vertex identifies the degree of weathering of these sources, independent of the chemistry of the unweathered parent rock.
The W index has a number of significant properties that are not found in conventional weathering indices. First, the W index is sensitive to chemical changes that occur during weathering because it is based on eight major oxides, whereas most conventional indices are defined by between two and four oxides. Second, the W index provides robust results even for highly weathered sesquioxide-rich samples. Third, the W index is applicable to a wide range of felsic, intermediate and mafic igneous rock types. Finally, the MFW diagram is expected to facilitate provenance analysis of sedimentary rocks by identifying their weathering trends and thereby enabling a backward estimate of the composition of the unweathered source rock. 相似文献
7.
The geochemical study of siliciclastic rocks from the Lower Cambrian of Parahio Valley has been studied to describe the provenance, chemical weathering and tectonic setting. The K2O/Al2O3 ratio and positive correlation of Co (r=0.85), Ni (r=0.86), Zn (r=0.82), Rb (r=0.98) with K2O reflects that the presence of clay minerals control the abundances of these elements and suggests a warm and humid climate for this region. The chondrite normalized REE pattern of the samples is equivalent to upper continental crust, which reflects enriched LREE and flat HREE with negative Eu anomaly. The tectonic setting discriminant diagram log[K2O/Na2O] vs. SiO2; [SiO2/Al2O3] vs. log[K2O/Na2O]; [SiO2/20] – [K2O+Na2O] – [TiO2+Fe2O3+MgO] indicates transitional tectonic setting from an active continental margin to a passive margin. The discriminant function plot indicates quartzose sedimentary provenance, and to some extent, the felsic igneous provenance, derived from weathered granite, gneissic terrain and/or from pre-existing sedimentary terrain. The CIA value indicates low to moderate degree of chemical weathering and the average ICV values suggests immature sediments deposited in tectonically active settings. The A–CN–K diagram indicates that these sediments were generated from source rocks of the upper continental crust. 相似文献
8.
中元古代常州沟组是华北克拉通北缘燕山地区变质结晶基底上的第一套沉积盖层,不整合覆盖于新太古代各类片麻岩之上。为了解常州沟组时期的古环境、古气候及其物质来源、构造环境和盆地性质,在野外地质调查的基础上,对常州沟组砂岩进行了粒度分析和地球化学分析测试。岩石组合、沉积构造和粒度分析结果指示区内常州沟组沉积环境演化由下至上依次为冲积扇、辫状河和碎屑潮坪。常州沟组砂岩地球化学特征具有高SiO2、Al2O3和K2O,低TiO2、Fe2O3、FeO、MgO含量的特点,成熟度较高,化学蚀变指数(CIA)介于52.00～73.23之间,化学风化作用指数(CIW)范围为93.04～98.68。由于岩石遭受钾交代作用影响,结合A-CN-K图解、Th/U-Th图解和古气候判别图综合分析,认为源区可能经历了较强的风化作用,古气候温暖、潮湿。Cr/Zr、Th/Sc、Ba/Sr、Rb/Sr值和La/Th-Hf图解指示常州沟组源区属性主要为上地壳环境,原岩成分以长英... 相似文献
9.
《Chemie der Erde / Geochemistry》2019,79(2):384-398
Geochemical compositions of the Lower Cambrian Niutitang Formation shales in the southeastern Yangtze Platform margin were investigated for provenance, tectonic setting, and depositional environment. The shale samples are characterized by higher abundances of large ion lithophile elements (Cs, Ba, and Pb), lower abundances of high field strength elements (Cr, Sc, and Co) and transition elements (Th, Zr, Hf, Nb, and Ta) relative to average shale. North American shale composition (NASC) -normalized rare earth element (REE) patterns are observed, with negative Ce anomalies, negative Eu anomalies, and positive Y anomalies. The chemical index of alteration (CIA) varies from 68.67–74.93. Alkali and alkaline element contents and CIA values suggest that the source rocks have undergone moderate weathering. The index of compositional variability (ICV), Zr/Sc and Th/Sc ratios vary from 0.53 to 1.07, 5.31 to 8.18 and 0.52–1.02, respectively. ICV values and relationships between Zr/Sc and Th/Sc ratios indicate negligible sedimentary recycling. The Al2O3/TiO2 (14–26) and TiO2/Zr (56–77) ratios imply that the source rocks of the investigated shales had intermediate igneous compositions. However, Cr/V ratios and a La/Th–Hf discrimination diagram suggest that the intermediate compositional signal of the source rocks was derived from a mixture of 75% mafic and 25% felsic igneous rocks rather than intermediate igneous rocks. The major source was the Jiangnan continental island arc with bimodal igneous rocks, lying to the south of the study area, together with a contribution from granites and gneisses uplifted and eroded in the Yangtze Block. Discrimination of tectonic setting using major and trace elements indicates that the source rocks originated in a transitional setting from active continental to passive margin, consistent with the failed intracontinental rift model for the evolution of the South China plate. The Niutitang Formation shales were deposited in a rift basin setting under conditions of anoxic bottom water in a redox-stratified water column, with organic-rich shales prospective for shale-gas production being found in deep-water downslope and basin environments rather than the shallow-water shelf. 相似文献
10.
为揭示黑龙江省东部早古生代晨明组沉积物源区特征及其沉积构造背景,对晨明组进行了地球化学特征研究。结果表明：晨明组岩石样品化学蚀变指数（ICA）值和斜长石蚀变指数（IPA）值较低、成分变异指数（ICV）值中等偏高,指示晨明组沉积物来源于不成熟的物质源区,并经历了较弱的化学风化作用和活动构造背景下的初次循环;LREE富集、HREE稳定和明显的负Eu异常,指示沉积物源区物质具有明显的上地壳特征且沉积物源岩为长英质火成岩;主量、微量和稀土元素特征共同指示晨明组形成于活动大陆边缘环境或大陆岛弧环境。结合前人研究成果,判定晨明组沉积物来源于经历了弱-中等程度化学风化作用的早古生代花岗质岩,沉积构造背景可能为靠近大陆岛弧的活动大陆边缘环境。 相似文献
11.
焦作煤田石炭-二叠纪泥质岩地球化学特征及古环境意义 总被引：2，自引：0，他引：2
泥质岩的地球化学特征蕴含了大量地质信息,在物源和沉积环境分析中的应用十分广泛。利用X射线荧光光谱仪和电感耦合等离子体质谱仪（ICP-MS）对华北板块南缘焦作煤田石炭-二叠纪泥质岩样品进行常量元素、微量元素（包括稀土元素）进行分析,并据此讨论泥质岩的物源性质、物源区岩石风化作用强度及当时古环境特征。研究区泥质岩的高Al2O3/TiO2值及低Cr/Zr和K2O/Al2O3值特征,以及泥质岩Zr-TiO2和Th/Co-La/Sc源岩判别图、Ni-Cr图和（Gd/Yb）N-Eu/Eu*图等的判别分析结果,都揭示了研究区泥质岩物源主要为后太古宙长英质岩石;Al2O3-CaO*+Na2O-K2O（A-CN-K）图和较高的黏土矿物成分反映了泥质岩源区受到钾交代作用的影响,致使CIA（化学蚀变指数）值被低估;高CIW（化学风化指数）值和Al2O3-CaO*-Na2O（A-C-N）判别图分析结果表明泥质岩物源区母岩在石炭-二叠纪经历了强烈的风化作用;Sr/Ba和B/Ga比值变化指示本溪组沉积时期到太原组沉积早期为海相为主的沉积环境,太原组沉积中期到山西组沉积早期为海陆过渡相为主的沉积环境,山西组沉积中期到上石盒子组沉积时期为陆相沉积环境。 相似文献
12.
LI Yilong WANG Guoqing XIAO Wenjiao ZOU Jing ZHENG Jianping Fraukje M. BROUWER 《《地质学报》英文版》2019,93(5):1228-1260
The Solonker suture zone has long been considered to mark the location of the final disappearance of the PaleoAsian Ocean in the eastern Central Asian Orogenic Belt(CAOB). However, the time of final suturing is still controversial with two main different proposals of late Permian to early Triassic, and late Devonian. This study reports integrated wholerock geochemistry and LA-ICP-MS zircon U-Pb ages of sedimentary rocks from the Silurian Xuniwusu Formation, the Devonian Xilingol Complex and the Permian Zhesi Formation in the Hegenshan-Xilinhot-Linxi area in central Inner Mongolia, China. The depositional environment, provenance and tectonic setting of the Silurian-Devonian and the Permian sediments are compared to constrain the tectonic evolution of the Solonker suture zone and its neighboring zones. The protoliths of the silty slates from the Xuniwusu Formation in the Baolidao zone belong to wacke and were derived from felsic igneous rocks with steady-state weathering, poor sorting and compositional immaturity. The protoliths of metasedimentary rocks from the Xilingol Complex were wackes and litharenites and were sourced from predominantly felsic igneous rocks with variable weathering conditions and moderate sorting. The Xuniwusu Formation and Xilingol Complex samples both have two groups of detrital zircon that peak at ca. 0.9–1.0 Ga and ca. 420–440 Ma, with maximum deposition ages of late Silurian and middle Devonian age, respectively. Considering the ca. 484–383 Ma volcanic arc in the Baolidao zone, the Xuxiniwu Formation represents an oceanic trench sediment and is covered by the sedimentary rocks in the Xilingol Complex that represents a continental slope sediment in front of the arc. The middle Permian Zhesi Formation metasandstones were derived from predominantly felsic igneous rocks and are texturally immature with very low degrees of rounding and sorting, indicating short transport and rapid burial. The Zhesi Formation in the Hegenshan zone has a main zircon age peak of 302 Ma and a subordinate peak of 423 Ma and was deposited in a back-arc basin with an early marine transgression during extension and a late marine regression during contraction. The formation also crops out locally in the Baolidao zone with a main zircon age peak of 467 Ma and a minor peak of 359 Ma, and suggests it formed as a marine transgression sedimentary sequence in a restricted extensional basin and followed by a marine regressive event. Two obvious zircon age peaks of 444 Ma and 280 Ma in the Solonker zone and 435 Ma and 274 Ma in Ondor Sum are retrieved from the Zhesi Formation. This suggests as a result of the gradual closure of the Paleo-Asian Ocean a narrow ocean sedimentary environment with marine regressive sedimentary sequences occupied the Solonker and Ondor Sum zones during the middle Permian. A restricted ocean is suggested by the Permian strata in the Bainaimiao zone. Early Paleozoic subduction until ca. 381 Ma and renewed subduction during ca. 310–254 Ma accompanied by the opening and closure of a back-arc basin during ca. 298–269 Ma occurred in the northern accretionary zone. In contrast, the southern accretionary zone documented early Paleozoic subduction until ca. 400 Ma and a renewed subduction during ca. 298–246 Ma. The final closure of the Paleo-Asian ocean therefore lasted at least until the early Triassic and ended with the formation of the Solonker suture zone. 相似文献
13.
《International Geology Review》2012,54(9):1003-1031
We have studied the petrography and the bulk-rock geochemistry of arenites and mudstones of the Cenomanian Peruc–Korycany Formation to characterize their provenance and sedimentary history, as well as the influence of weathering, hydraulic sorting, and recycling of the source rocks. The Peruc–Korycany Formation contains sedimentary facies reflecting both meandering- and braided-river systems and shallow-marine systems. Differences in the three depositional settings did not cause distinctly different modifications of the framework compositions of the arenites. The sand from the fluvial systems is very mature (Qm98F0Lt2). These fluvial arenites were subsequently modified by shallow-marine processes; reworking produced very slight decreases in the abundance of lithic fragments and polycrystalline quartz grains. The Cenomanian strata of the Bohemian Cretaceous Basin were derived dominantly from metasedimentary and crystalline rocks of the Palaeozoic Teplà-Barrandian and Cadomian Moldanubian units, respectively. Periods of low tectonic activity resulted in the deposition of arenites with quartzose framework compositions, indicating that climatic and/or transport/depositional-environmental controls overwhelmed factors such as source-rock compositions. Ultrastable dense minerals are useful indicators of sedimentary recycling within the Peruc–Korycanytarenites. Mudstone samples are characterized by abundant kaolinite, illite, chlorite, and quartz but by negligible amounts of goethite and gypsum. Concentrations normalized to the post-Archaean Australian shale (PAAS) show that the sediments are strongly depleted of Na, K, Ca, Sr, and Ba, probably because of the mobility of these elements during weathering. Chemical indices of alteration (CIA, CIW, and PIA) show that the degree of weathering of the source area was high. The data fall closer to the compositional fields of highly weathered minerals such as kaolinite, gibbsite, and chlorite on an A-CN-K diagram. The indices of compositional variability of the studied samples are much less than 1, suggesting that the samples are compositionally mature and were likely dominated by recycling. The elemental ratios critical of provenance (La/Sc, Th/Sc, Th/Co, Th/Cr, and Cr/Th) are similar to fine fractions derived from the weathering of mostly granitoids rather than mafic rocks. 相似文献
14.
《International Geology Review》2012,54(9):1132-1157
ABSTRACTThis article reports single-grain multi-elemental results (Sr, Y, Th, U, and rare earth elements) obtained in 966 apatites from 18 rocks (sandstones and granitoids) that were sampled from the Mesozoic (Todos Santos and San Ricardo Formations) and Eocene (the El Bosque Formation) successions as well as from the Permian–Triassic Chiapas Massif Complex (CMC), all of which are exposed within the Sierra de Chiapas (SCH), SE Mexico. The objectives of the present study are (1) to establish changes in provenance between the Mesozoic and Eocene sedimentary sequences using single-grain apatite geochemistry, and (2) to identify source areas for siliciclastic materials from the Todos Santos, San Ricardo, and the El Bosque Formations. The results of the present work strongly suggest that apatites from the Todos Santos and San Ricardo Formations were mainly derived from intermediate to felsic I-type granitoids as well as from arc-related volcanic rocks, indicating that the CMC basement was the most important source area for the Mesozoic sandstones in the SCH. An abrupt change in provenance from Mesozoic to Eocene units was identified based on single-grain apatite geochemistry. Detrital apatites of the Ypresian–Lutetian El Bosque Formation were derived from diverse source rocks such as mafic–ultramafic rocks, intermediate to felsic I-type plutons, strongly fractionated S-type granites and pegmatites, as well as from different metamorphic source lithologies (including high-pressure rocks) such as gneisses, migmatites, metapelites, and/or eclogites. It was proposed, therefore, that most Eocene sediments of the SCH were derived from the Guatemala Suture Complex, which involves all the rock types mentioned above. A minor portion of the El Bosque Formation sediments was derived from the CMC area and/or from recycled sandstones from the Mesozoic Todos Santos and San Ricardo Formations. Some advantages and disadvantages of provenance studies based on detrital apatite chemistry were also observed and briefly discussed. 相似文献
15.
鄂西地区的上奥陶统五峰组、下志留统龙马溪组下部、下二叠统孤峰组和上二叠统大隆组中发育有薄层硅质岩。二叠系栖霞组、茅口组和吴家坪组灰岩中发育有结核状或似层状燧石。Fe Al Mn三角图 ,Cu、Ni、Co、Cr、Zr的关系 ,U Th判别图 ,Ba、As、Sb元素和REE配分模式等地球化学指标表明 :五峰组和龙马溪组层状硅质岩属于正常海水中生物化学和化学沉积 ;孤峰组和大隆组层状硅质岩、茅口组灰岩中燧石结核不属于典型的热水沉积相 ,但受热水作用的影响 ,而孤峰组硅质岩受热水作用明显。鄂西五峰组和龙马溪组硅质岩的沉积环境是四周被古陆或台地环绕的半封闭深水相滞流盆地。鄂西孤峰组和大隆组硅质岩的沉积环境是由裂陷作用形成的碳酸盐台地内部的盆地(或台沟 )滞流还原环境。CaO/(Fe +CaO)值和 (MgO/Al2 O3 )× 10 0值表明 :五峰组、龙马溪组和大隆组硅质岩沉积环境海水略有淡化。栖霞组、茅口组和吴家坪组含结核状或似层状燧石的生物灰岩 ,形成于陆棚上快速海侵和上升洋流形成的还原环境。 相似文献
16.
Mohammad Amir Hossain Bhuiyan M. Julleh Jalalur Rahman Samuel B. Dampare Shigeyuki Suzuki 《Journal of Geochemical Exploration》2011,111(3):113-137
This present study describes the elemental geochemistry of fluvial sediments in the Kurigram (upstream) to Sirajganj–Tangail (downstream) section of the Brahmaputra–Jamuna River, Bangladesh, with the aim of evaluating their provenance, weathering and tectonic setting. Petrographically, the sediments are rich in quartz (68%), followed by feldspars (8.5%) and lithic grains (7%). The bulk sediment chemistry is influenced by grain size. Concentrations of TiO2, Fe2O3, MgO, K2O, P2O5, Rb, Nb, Cr, V, Y, and, Ce, Th and Ga slightly decrease with increasing SiO2/Al2O3 and grain size, suggesting clay matrix control. In contrast, concentrations of CaO, Na2O, Sr and Pb increase with increasing SiO2/Al2O3 and grain size, suggesting residence of these substances in feldspar. Decrease in Zr as grain size increases is likely controlled both by clay matrix and heavy minerals. In addition, heavy minerals' sorting also influences Ce, Th, Y and Cr abundances in some samples. The sediments are predominantly quartzose in composition with abundant low-grade metamorphic and sedimentary lithics, low feldspars and trace volcanic detritus, indicating a quartzose recycled orogen province as a source of the sediments. Discriminant diagrams together with immobile element ratio plots show that, the Brahmaputra–Jamuna River sediments are mostly derived from rocks formed in an active continental margin. Moreover, the rare earth element ratios as well as chondrite-normalized REE patterns with flat HREE, LREE enrichment, and negative Eu anomalies indicate derivation of the sediments of Brahmaputra–Jamuna River from felsic rock sources of upper continental crust (UCC). The chemical indices of alteration suggest that Brahmaputra–Jamuna River sediments are chemically immature and experienced low chemical weathering effects. In the A–CN–K ternary diagram, most of the samples close to the plagioclase–K-feldspar join line and to the UCC plot, and in the field of various lithologies of Higher Himalayan Crystalline Series, suggesting that rocks in these series are likely source rocks. Therefore, the elemental geochemistry of the Brahmaputra–Jamuna River sediments is controlled mostly by mechanical breakdown of lithic fragments and subsequent preferential attrition of muscovite > albite > quartz. 相似文献
17.
S.M. Moosavirad M.R. Janardhana M.S. Sethumadhav M.R. Moghadam M. Shankara 《Chemie der Erde / Geochemistry》2011,71(3):279-288
Lower Jurassic shales of the Shemshak Formation of Kerman Province, Central Iran, were analyzed for major and selected trace elements to infer their provenance, intensity of palaeoweathering of the source rocks and tectonic setting. Plots of shales on Al2O3 wt.% versus TiO2 wt.% diagram and Cr (ppm) versus Ni (ppm) diagram indicate that acidic (granitic) rocks constitute the source rocks in the provenance. Average CIA, PIA and CIW values (84%, 92%, 93%, respectively) imply intense weathering of the source material. Plots of shales on bivariate discriminant function diagram reveal an active continental margin setting for the provenance. The inferred tectonic setting for the Lower Jurassic shales of the Shemshak Formation of Kerman Province is in agreement with the tectonic evolutionary history of the Central Iran during the Jurassic period. 相似文献
18.
This present study describes the geochemistry of fluvial sediments of the Palar river (lower reaches), Southern Peninsular India, with an aim to evaluate their provenance, weathering and tectonic setting. The bulk sediment chemistry is influenced by grain size. The river sediments are enriched with SiO2 and depleted in Al2O3, K2O, CaO, Na2O, MgO, P2O5, MnO, Fe2O3 as compared with UCC values. Geochemical classification indicate that the sediments are mainly arkose, wacke and shale in composition. Discriminant diagrams together with immobile element ratio plots reveal that, the Palar river sediments are mostly derived from rocks formed in an active continental margin. Additionally, the rare earth element ratios as well as chondrite-normalized REE patterns with flat HREE, LREE enrichment, and negative Eu anomalies indicate felsic rock sources. The chemical indices of alteration suggest that Palar river sediments are chemically immature and have experienced low chemical weathering effects. This is further supported by the Th/U Rb/Sr ratio and A-CN-K ternary diagram, with most of the sample data points falling close to the plagioclase-smectite line. The bivariate plot of Th/Sc versus Zr/Sc suggest a moderate recycled origin of the sediments. 相似文献
19.
出露于羌塘盆地沃若山地区的雀莫错组砂岩是北羌塘盆地早侏罗世的沉积物,对研究早侏罗世沉积盆地的演化特征具有重要的意义。通过对其地球化学特征的分析研究,结果表明该组砂岩为被动大陆边缘裂陷期的沉积产物,岩性主要为岩屑砂岩,岩石矿物成分主要在钾长石、斜长石、伊利石、绿泥石以及石英之间变化。化学风化作用指标(CIW)、化学蚀变作用指标(CIA)和A-CN-K图解,反映该组砂岩的碎屑成分受到了强烈的风化环境,并在风化过程中发生钾交代作用,长石发生伊利石化。化学组分指标(ICV)表明岩石碎屑为近源的第一次旋回沉积物,受沉积分选和再循环作用影响不大;A-CN-K图解还反映出砂岩碎屑源岩中斜长石含量高于钾长石含量,主要在花岗岩和花岗闪长岩之间变化;稀土元素特征表明该组砂岩具有同源性,其成分主要受源区岩石成分控制,为酸性火山岩类。 相似文献
20.
M. A. Quasim Imran Khan A. H. M. Ahmad 《Journal of the Geological Society of India》2017,90(4):467-484
The upper Kaimur Group (UKG) of the Vindhyan Supergroup in central India, primarily consists of three rock types-Dhandraul sandstone, Scarp sandstone and Bijaigarh shale. The present study aims to reconstruct the parent rock assemblages, their tectonic provenance, mineralogy, weathering intensity, hydraulic sorting and depositional tectonic setting. Samples from the UKG rocks representing the Dhandraul sandstone, Scarp sandstone and Bijaigarh shale were studied using a combination of petrographic, mineralogical, and geochemical techniques. Texturally, medium to coarse grained UKG sandstones are mature and moderate to well sorted. Deficiency of feldspars in these sandstones indicates that the rocks are extensively recycled from distant sources. Their average modal composition for Scarp (avg. Qt99 F0.2L0.8) and Dhandraul (avg. Qt99 F0.1L0.8) sandstones, classifies them as quartz arenite to sub-litharenite types, which is consistent with geochemical study. Major element concentrations revealed that sandstones have high SiO2, K2O < Na2O, and low Fe2O3, which are supported by the modal data. On the other hand, sandstone samples are enriched in most trace elements such as Ce, Sr, V, Sc and Zr and depleted in U and Th. The CIA values (43.17–76.48) of the UKG rocks indicate low to moderate weathering, either of the original source or during transport before deposition, which may have related to low-relief and humid climatic conditions in the source area. Further, petrographic and geochemical interpretations indicate that they are derived from craton interior to quartzose recycled sedimentary rocks and deposited in a passive continental margin. Therefore, granitic and low grade metamorphic rocks of Mahakoshal Group and Chotanagpur granite-gneiss, situated on the southern and south-eastern side of the Vindhyan basin are suggested as possible provenance for the UKG rocks. 相似文献