首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
New data on seismically triggered soft-sediment deformation structures in Pleniglacial to Late Glacial alluvial fan and aeolian sand-sheet deposits of the upper Senne area link this soft-sediment deformation directly to earthquakes generated along the Osning Thrust, which is one of the major fault systems in Central Europe. Soft-sediment deformation structures include a complex fault and fold pattern, clastic dikes, sand volcanoes, sills, irregular intrusive sedimentary bodies, flame structures, and ball-and-pillow structures. The style of soft-sediment deformation will be discussed with respect to brittle failure, liquefaction and fluidization processes, and was controlled by (1) the magnitude of the earthquake and (2) the permeability, tensile strength and flexural resistance of the alluvial and aeolian sediments. It is the first time in northern Germany that fluidization and liquefaction features can be directly related to a fault. The occurrence of seismicity in the Late Pleistocene and in the seventeenth century indicates ongoing crustal movements along the Osning Thrust and sheds new light on the seismic activity of northern Germany. The Late Pleistocene earthquake probably occurred between 15.9 ± 1.6 and 13.1 ± 1.5 ka; the association of soft-sediment deformation structures implies that it had a magnitude of at least 5.5.  相似文献   

2.
The paper presents the results of a comprehensive investigation into the recent sediments of Proval Bay. This bay formed during catastrophicflooding of a big block of land as a result of an earthquake in 1862. Comparison of the sketch map of the bay for 1862 with its modern mapshows that the boundary of the Selenga River delta has shifted considerably eastward. The sediments of Proval Bay are sands, silty pelite,and pelitic silt. Terrigenous material is predominant and consists of mineral grains and land plant remains, admixed with diatom frustules andsponge spicules. In the southwestern part of the bay, turbidites and a soil layer have been found. The latter was buried when the water levelin Lake Baikal rose after the construction of the Irkutsk dam in 1959–1964. In the northeastern part of the bay, a peatlike layer has beenfound in the bottom sediment core. It formed in Lake Beloe, which existed in the Tsagan steppe before the 1862 earthquake. According todiatom analysis, this lake was shallow and eutrophic. The sedimentation rates in different parts of Proval Bay differ greatly and directly dependon proximity to the Selenga River. Variations in the geochemical indicators which reflect the ratio of organic to clastic components in thebottom sediments of the bay are controlled by temperature and water level variations in Lake Baikal.  相似文献   

3.
This paper presents the first boundary equations describing the relationship between earthquake parameters (magnitude M S and macroseismic intensity I P at the observation point on the MSK-64 scale) and clastic dikes (having maximal thickness m cd , visible height h cd , and the index of manifestation intensity of dikes in the cross section I cd ). As was expected, the maximal size of dikes grows with an increase in the earthquake magnitude and macroseismic intensity. Analysis of the dependences showed that it is better to use all three parameters for estimation of the minimal threshold M S or I P from clastic dikes, and, in the absence of data on seismogenic rupture, the maximal calculated value should be used. Some limitations in application and the advantages of the equations obtained are discussed with respect to characterizing earthquakes of the pre-instrumental period.  相似文献   

4.
Earthquake, as disastrous events in geological history, can be recorded as soft-sediment deformation. In the Palaeogene of the East China Sea shelf, the soft-sediment deformation related to earthquake event is recognized as seismic micro-fractures, micro-corrugated laminations, liquefied veins, ‘vibrated liquefied layers’, deformed cross laminations and convolute laminations, load structures, flame structures, brecciation, slump structures and seismodisconformity. There exists a lateral continuum, the wide spatial distribution and the local vertical continuous sequences of seismites including slump, liquefaction and brecciation. In the Palaeogene of East China Sea shelf, where typical soft-sediment deformation structures were developed, clastic deposits of tidal-flat, delta and river facies are the main background deposits of Middle-Upper Eocene Pinghu Formation and Oligocene Huagang Formation. This succession also records diagnostic marks of event deposits and basinal tectonic activities in the form of seismites.  相似文献   

5.
The 19 October 2012 earthquake (M L = 5.1) occurred in the northern continental margin of Egypt within the Nile Cone at latitude 32.35° N and longitude 31.27° E. The quake was felt over a wide area in north Egypt and East Mediterranean countries, but no casualties have been reported. This area had experienced the large earthquake (Ms = 6.7) of 12 September 1955. The fault plane solution of the 19 October 2012 earthquake is here presented based on the digital seismograms recorded by the Egyptian National Seismological Network (ENSN) and other regional seismic stations. The analysis is carried out using the well-known techniques of first motion polarities of P-wave and the amplitude ratios of P-, SH-, and SV-waves with lower hemisphere projection. The fault plane solution based on the first P-wave onset demonstrates a left lateral strike-slip faulting mechanism, while the solution based on both P-wave polarities and amplitude ratios of P-, SH-, and SV-waves reveals a reverse fault with strike-slip component trending NW–SE to NE–SW, in conformity with the N–S compression along the Hellenic Arc convergence zone. Following the Brune’s model, the source dynamic parameters for the 19 October 2012 earthquake are estimated as corner frequency = 1.47 Hz, fault radius = 0.7 km, stress drop = 22.1 MPa, seismic moment = 2.80E + 16 Nm, and moment magnitude M w = 4.9. These parameters may provide important quantitative information for the seismic hazard assessment studies.  相似文献   

6.
Earthquakes in Kenya are common along the Kenya Rift Valley because of the slow divergent movement of the rift and hydrothermal processes in the geothermal fields. This implies slow but continuous radiation of seismic energy, which relieves stress in the subsurface rocks. On the contrary, the NW-SE trending rift/fault zones such as the Aswa-Nyangia fault zone and the Muglad-Anza-Lamu rift zone are the likely sites of major earthquakes in Kenya and the East African region. These rift/fault zones have been the sites of a number of strong earthquakes in the past such as the M w = 7.2 southern Sudan earthquake of 20 May 1990 and aftershocks of M w = 6.5 and 7.1 on 24 May 1990, the 1937 M s = 6.1 earthquake north of Lake Turkana close to the Kenya-Ethiopian border, and the 1913 M s = 6.0 Turkana earthquake, among others. Source parameters of the 20 May 1990 southern Sudan earthquake show that this earthquake consists of only one event on a fault having strike, dip, and rake of 315°, 84°, and ?3°. The fault plane is characterized by a left-lateral strike slip fault mechanism. The focal depth for this earthquake is 12.1 km, seismic moment M o = 7.65 × 1019 Nm, and moment magnitude, M w = 7.19 (?7.2). The fault rupture started 15 s earlier and lasted for 17 s along a fault plane having dimensions of ?60 km × 40 km. The average fault dislocation is 1.1 m, and the stress drop, ?σ, is 1.63 MPa. The distribution of historical earthquakes (M w ≥ 5) from southern Sudan through central Kenya generally shows a NW-SE alignment of epicenters. On a local scale in Kenya, the NW–SE alignment of epicenters is characterized by earthquakes of local magnitude M l ≤ 4.0, except the 1928 Subukia earthquake (M s = 6.9) in central Kenya. This NW–SE alignment of epicenters is consistent with the trend of the Aswa-Nyangia Fault Zone, from southern Sudan through central Kenya and further southwards into the Indian Ocean. We therefore conclude that the NW–SE trending rift/fault zones are sites of strong earthquakes likely to pose the greatest earthquake hazard in Kenya and the East African region in general.  相似文献   

7.
A probabilistic seismic hazard assessment is developed here using maximum credible earthquake magnitude statistics and earthquake perceptibility hazard. Earthquake perceptibility hazard is defined as the probability a site perceives ground shaking equal to or greater than a selected ground motion level X, resulting from an earthquake of magnitude M, and develops estimates for the most perceptible earthquake magnitude, M P(max). Realistic and usable maximum magnitude statistics are obtained from both whole process and part process statistical recurrence models. These approaches are extended to develop relationships between perceptible earthquake magnitude hazard and maximum magnitude recurrence models that are governed by asymptotic and finite return period properties, respectively. Integrated perceptibility curves illustrating the probability of a specific level of perceptible ground motion due to all earthquakes over the magnitude range extending from ?∞ to a magnitude M i are then developed from reviewing site-specific magnitude perceptibility. These lead on to achieving site-specific annual probability of exceedance hazard curves for the example cities of Sofia and Thessaloniki for both horizontal ground acceleration and ground velocity. Both the maximum credible earthquake magnitude M 3 and the most perceptible earthquake magnitude M P(max) are of importance to the earthquake engineer when approaching anti-seismic building design. Both forms of hazard are illustrated using contoured hazard maps for the region bounded by 39°–45°N, 19°–29°E. Patterns are observed for these magnitude hazard estimates—especially M P(max) specific to horizontal ground acceleration and horizontal ground velocity—and compared to inferred patterns of crustal deformation across the region. The full geographic region considered is estimated to be subject to a maximum credible earthquake magnitude M 3—estimated using cumulative seismic moment release statistics—of 7.53 M w, calculated from the full content of the adopted earthquake catalogue, while Bulgaria’s capital, Sofia, is estimated a comparable value of 7.36 M w. Sofia is also forecast most perceptible earthquake magnitudes for the lowest levels considered for horizontal ground acceleration of M PA(50) = 7.20 M w and horizontal ground velocity of M PV(5) = 7.23 M w for a specimen focal depth of 15 km.  相似文献   

8.
The early (Devonian) collisional stage in SW Iberia has been investigated through the analysis of deformation in the Cubito‐Moura schists, the main lithology of an Allochthonous Complex putatively rooted in the suture between the Ossa‐Morena and South Portuguese zones. The first deformation in these schists (D1) is recorded as a S1‐L1 mylonitic fabric well preserved in early quartz veins. Subsequent D2 deformation caused the main folds and the main (S2) foliation. After restoration, the stretching lineation (L1) trends at a small angle with the Ossa‐Morena/South Portuguese suture. This trend, together with the top‐to‐the‐east kinematics determined from quartz microfabric is indicative of an oblique left‐lateral collisional scenario in SW Iberia. Chlorite–white K‐mica–quartz ± chloritoid multi‐equilibrium calculations yield P–T conditions in the range 0.9–1.2 GPa and 300–400 °C, during the first collisional stage. P–T conditions during D2 were 0.3–0.8 GPa and 400–450 °C, thus indicating an important stage of exhumation of the Allochthonous Complex during these two collisional events, after subduction of the Ossa‐Morena Zone margin under the South Portuguese Zone continental crust. In the general context of the Variscan orogen, dominated by dextral collision, the left‐lateral convergence in SW Iberia can be explained in terms of the Avalonian salient represented by the South Portuguese Zone, which would impinge between Iberia and Morocco.  相似文献   

9.
The stress conditions of the ductile-to-brittle regime have been assessed along the Asuke Shear Zone (ASZ), which strikes NE–SW in the Cretaceous Ryoke granite terrain in SW Japan. Along the ASZ, pseudotachylyte and mylonitized pseudotachylyte are locally developed together with cataclasite. The simultaneous operation of dislocation creep and grain-size-sensitive creep, as indicated by the coexistence of the Z-maximum and relatively random c-axis lattice preferred orientations as well as the sizes of dynamically recrystallized quartz grains (6.40–7.79 μm) in the mylonitized pseudotachylyte, suggest differential stresses of 110–130 MPa at ∼300 °C. The e-twin morphology, twinning ratio, and distribution of the glide direction on the e-twin plane of the twinned calcite in the amygdules of the pseudotachylyte suggest the stress conditions of the σ1 and σ3 axes trend 228° and 320° and plunge 55° and 1°, respectively, and indicate differential stresses of 40–80 MPa at 150–200 °C. Based on kinematic indicators in the fault rocks, the stress conditions estimated from calcite twins, and the cooling history of the granitic protolith, the ASZ is inferred to have been activated under a stress state that caused sinistral normal movements before and after pseudotachylyte formation at 70–50 Ma.  相似文献   

10.
The Pan-African NE–SW elongated Bandja granitic pluton, located at the western part of the Pan-African belt in Cameroon, is a K-feldspar megacryst granite. It is emplaced in banded gneiss and its NW border underwent mylonitization. The magmatic foliation shows NE–SW and NNE–SSW strike directions with moderate to strong dip respectively in its northern and central parts. This mostly, ferromagnetic granite displays magnetic fabrics carried by magnetite and characterized by (i) magnetic foliation with best poles at 295/34, 283/33 and 35/59 respectively in its northern, central and southern parts and (ii) a subhorizontal magnetic lineation with best line at 37/8, 191/9 and 267/22 respectively in the northern, central and southern parts. Magnetic lineation shows an ‘S’ shape trend that allows to (1) consider the complete emplacement and deformation of the pluton during the Pan-African D 2 and D 3 events which occurred in the Pan-African belt in Cameroon and (2) reorganize Pan-African ages from Nguiessi Tchakam et al. (1997) compared with those of the other granitic plutons in the belt as: 686 ±17 Ma (Rb/Sr) for D 1 age of metamorphism recorded in gneiss; and the period between 604–557 Ma for D 2–D 3 emplacement and deformation age of the granitic pluton in a dextral ENE–WSW shear movement.  相似文献   

11.
Epidote-bearing porphyritic dikes (whole rock analysis: SiO2?=?55–65 wt. %, MgO <2.1 wt. %, K2O <2.5 wt. %, Al2O3 >17 wt. %, Na2O + K2O?=?5.7–9.4 wt. %) situated in the continental margin zone, the Middle Urals, Russian Federation have been dated using SHRIMP U-Pb zircon techniques and give a Middle Devonian age of 388?±?2 Ma and 389?±?6 Ma. The porphyries contain phenocrysts of magmatic epidote (Ps?=?17–25 %), Ca- and Mn-rich (CaO >9 wt. %; MnO >6 wt. %) almandine garnet, Al-rich (Al2O3?=?12–16 wt. %) amphibole, titanite, plagioclase, biotite, muscovite, apatite, and quartz. 60 to 70 % groundmass of the porphyritic dikes consists of fine-grained albite, quartz, and K-feldspar. A variety of thermobarometric estimations, plus comparison with published experimental data indicate that the phenocryst assemblage was stable between 5 and 11 kbar and 690 to 800 °C. Oxygen fugacity was close to or greater than logfo2 = Ni-NiO + 1. Later stage formation of the quartz-feldspar groundmass took place at hypabyssal conditions, corresponding to 1 to 2 kbar and 660 to 690 °C. The porphyritic dikes are metaluminous to slightly peraluminous (ACNK?=?0.7–1.17). They are enriched in REE and depleted Nb and Ti. They show features typical of subduction-related magmas. Chemical composition and isotopic ratios of 86Sr/87Sri?=?0.709–0.720 suggest that both mantle- and deep crustal-derived materials were involved in their petrogenesis.  相似文献   

12.
The study deals spatial mapping of earthquake hazard parameters like annual and 100-years mode along with their 90% probability of not being exceeded (NBE) in the Hindukush–Pamir Himalaya and adjoining regions. For this purpose, we applied a straightforward and most robust method known as Gumbel’s third asymptotic distribution of extreme values (GIII). A homogeneous and complete earthquake catalogue during the period 1900–2010 with magnitude MW ⩾ 4.0 is utilized to estimate these earthquake hazard parameters. An equal grid point mesh, of 1° longitude X 1° latitude, is chosen to produce detailed earthquake hazard maps. This performance allows analysis of the localized seismicity parameters and representation of their regional variations as contour maps. The estimated result of annual mode with 90% probability of NBE is expected to exceed the values of MW 6.0 in the Sulaiman–Kirthar ranges of Pakistan and northwestern part of the Nepal and surroundings in the examined region. The 100-years mode with 90% probability of NBE is expected to exceed the value of MW 8.0 in the Hindukush–Pamir Himalaya with Caucasus mountain belt, the Sulaiman–Kirthar ranges of Pakistan, northwestern part of the Nepal and surroundings, the Kangra–Himanchal Pradesh and Kashmir of India. The estimated high values of earthquake hazard parameters are mostly correlated with the main tectonic regimes of the examined region. The spatial variations of earthquake hazard parameters reveal that the examined region exhibits more complexity and has high crustal heterogeneity. The spatial maps provide a brief atlas of the earthquake hazard in the region.  相似文献   

13.
Kinematic models of various types of transpression have been used to explain fabric features and strain in many natural deformation studies. Here, a mathematical model that encompasses all monoclinic and triclinic transpressional deformations including triclinic deformation with inclined simple shear (ϕ) and/or inclined extrusion orientations (υ) can be tested using a step-by-step approach with available field evidence. Two cases are presented. The first case from the Wabigoon–Quetico boundary in the Archean Superior Province utilizes both fabric orientation and quantified strain data. The best fit of the field evidence to the model indicates that deformation likely took place along subvertical shear zones via transpression with subhorizontal simple shear (ϕ = 0–20°) and variable inclined extrusion direction (extrusion can be either east or west and υ typically indicates extrusion orientations between 0 and 50° from vertical). The second case of the South Iberian shear zone has fabric orientation data, but no quantifiable strain possibilities. The best fit of the field evidence to the model indicates that deformation likely took place along a moderately inclined shear zone via transpression with subhorizontal simple shear (ϕ = 0–20°) and variable inclined extrusion direction (υ values between 0° and 80° from the true dip of the shear zone). Using this protocol in other examples of natural deformation will allow further constraints to be applied to kinematic models.  相似文献   

14.
The paper presents a detailed analysis of 1st April 2015 earthquake, whose epicenter (30.16° N, 79.28° E) was located near Simtoli village of Chamoli district, Uttarakhand. The focal depth is refined to 7 km by the grid search technique using moment tensor inversion. The source parameters of the earthquake as estimated by spectral analysis method suggested the source radius of ~1.0 km, seismic moment as 1.99E+23 dyne-cm with moment magnitude (Mw) of 4.8 and stress drop of 69 bar. The fault plane solution inferred using full waveform inversion indicated two nodal planes, the northeast dipping plane having strike 334° and dip 5° and the southwest dipping plane with dip 86° and strike 118°. The parallelism of the nodal plane striking 334° with dip 5° as indicated in depth cross sections of the tectonic elements suggested the north dipping Main Boundary Thrust (MBT) to be the causative fault for this earthquake. Spatio-temporal distribution of earthquakes during the period 1960-2015 showed seismic quiescence during 2006-2010 and migration of seismicity towards south.  相似文献   

15.
《地学前缘(英文版)》2018,9(6):1957-1980
The Paleoproterozoic basement of the northeastern part of the Leo-Man craton is intruded by generally NW-trending dikes. These regional scale dikes extend over 1000 km in Burkina Faso, Mali and Niger. We present chemical and Sr-Nd isotope compositions, as well as 40Ar/39Ar ages of these dikes with the following strikes N98°–N112°, and N114°–N124° in NE Burkina Faso. Field relationships show that the dikes are posterior to all other rock types dated between 2.26 Ga and 2.0 Ga. Chemical data indicate that the dikes are continental flood basalts and composed of low-Ti (TiO2 ≤ 2 wt.%) sub-alkaline basalts and andesites. They exhibit a minor negative Europium anomaly (0.86–0.99) and slightly fractionated REE patterns ((La/Yb)N = 2.5–9.1; YbN = 9.5–19.9). The ratios of Th/Ta (1.3–11.4) and Ce/Pb (5.2–58.5) suggest a varying crustal assimilation of the dike magmas during ascent in the continental crust for all studied samples. Calculated P-T conditions indicate that the magma reached temperatures of 1285 °C (calculated from olivine compositions) and pressures of 6.9 kbar (calculated for pyroxene minerals). Calculated initial 87Sr/86Sr (0.70040–0.70260) and ɛNd(t) = +2.1 to −3.5 at 1575 Ma, also point to a crustal contamination with the most primitive samples showing TDM values of 1946 Ma and 2154 Ma. The low values of La/Ba (<0.2) and Nb/La (<1.0), contrast with the low Th/Nb (<0.9), and suggest a lithospheric mantle or subduction-modified mantle as possible source for the dikes. Sr-Nd data, Mg# and Nb-Ta-Zr-Y-Th-Tb-Yb compositions further suggest that the most primitive samples were emplaced in a none orogenic setting and their magmas were subjected to variable crustal contaminations. Literature and the present whole rock 40Ar/39Ar age determinations show that the dikes were emplaced during a widespread Mesoproterozoic magmatism between 1.6 Ga and 1.2 Ga, and were affected by a thermal event causing the argon systematics resetting, best constrained by the date of sample KK1 (1236 ± 20 Ma, 40Ar/36Ar = 294 ± 13, MSWD = 2.2). Contemporaneous 1590–1570 Ma extensive magmatism is reported in other crustal blocks in Baltica (Sveconorw-Goth, svecofennian) NW Laurentia (Slave craton, Yukon), and Australia (Gawler craton), and together with the 1575 studied dikes, are related to the breakup of the supercontinent Nuna.  相似文献   

16.
The low-angle dip schistosity zones of the Belomorian mobile belt of northern Karelia are zones of plastic flow of thrust origin. They were formed from 1.85 to 1.90 Ga: 1879 ± 21 Ma according to 40Ar/39Ar for amphibole from amphibolites and 1857 ± 13 Ma according to the Sm–Nd isochron in amphibolites. The P–T parameters of rock metamorphism in low-angle dip schistosity zones correspond to the boundary of amphibolite and granulite facies of metamorphism: T = 640–765°C, rarely rising to 826°C; P = 8.0–11.7 kbar. The hypothesis of the two-stage Paleoproterozoic metamorphism of rocks of the Belomorian mobile belt was introduced.  相似文献   

17.
The Africa–Arabia plate boundary comprises the Red Sea oceanic spreading centre and the left‐lateral Dead Sea Fault Zone (DSFZ); however, previous work has indicated kinematic inconsistency between its continental and oceanic parts. The Palmyra Fold Belt (PFB) splays ENE from the DSFZ in SW Syria and persists for ～400 km to the River Euphrates, but its significance within the regional pattern of active crustal deformation has hitherto been unclear. We report deformation of Euphrates terraces consistent with Quaternary right‐lateral transpression within the PFB, indicating anticlockwise rotation (estimated as 0.3° Ma?1 about 36.0°N 39.8°E) of the block between the PFB and the northern DSFZ relative to the Arabian Plate interior. The northern DSFZ is shown to be kinematically consistent with the combination of Euler vectors for the PFB and the Red Sea spreading, resolving the inconsistency previously evident. The SW PFB causes a significant earthquake hazard, previously unrecognized, to the city of Damascus.  相似文献   

18.
Two major traces of active thrust faults were identified in the Kashmir Basin (KB) using satellite images and by mapping active geomorphic features. The ~N130°E strike of the mapped thrust faults is consistent with the regional ~NE–SW convergence along the Indian–Eurasian collision zone. The ~NE dipping thrust faults have uplifted the young alluvial fan surfaces at the SW side of the KB. This created a major tectono-geomorphic boundary along the entire strike length of the KB that is characterised by (1) a low relief with sediment-filled sluggish streams to the SE and (2) an uplifted region, with actively flowing streams to the SW. The overall tectono-geomorphic expression suggests that recent activity along these faults has tilted the entire Kashmir valley towards NE. Further, the Mw 7.6 earthquake, which struck Northern Pakistan and Kashmir on 8 October 2005, also suggests a similar strike and NE dipping fault plane, which could indicate that the KB fault is continuous over a distance of ~210 km and connects on the west with the Balakot Bagh fault. However, the geomorphic and the structural evidences of such a structure are not very apparent on the north-west, which thus suggest that it is not a contiguous structure with the Balakot Bagh fault. Therefore, it is more likely that the KB fault is an independent thrust, a possible ramp on the Main Himalayan Thrust, which has uplifting the SW portion of the KB and drowning everything to the NE (e.g. Madden et al. 2011). Furthermore, it seems very likely that the KB fault could be a right stepping segment of the Balakot Bagh fault, similar to Riasi Thrust, as proposed by Thakur et al. (2010). The earthquake magnitude is measured by estimating the fault rupture parameters (e.g. Wells and Coppersmith in Bull Seismol Soc Am 84:974–1002, 1994). Therefore, the total strike length of the mapped KB fault is ~120 km and by assuming a dip of 29° (Avouac et al. in Earth Planet Sci Lett 249:514–528, 2006) and a down-dip limit of 20 km, a Mw of 7.6 is possible on this fault.  相似文献   

19.
《Journal of Structural Geology》2004,26(6-7):1275-1291
The Indarama lode gold deposit is hosted by vertically-dipping basalt in the Late Archaean Midlands Greenstone Belt of Zimbabwe. Major deformation events at 2.68 and 2.58 Ga established a complex array of fractures. A limited range of orientations of this fracture network opened towards the end of the younger deformation event, creating a lode pattern where 92% of mineralised veins dip at less than 50°, mainly to the E and W, and most strike directions are represented. A clustered distribution of poles to the quartz–carbonate veins indicates a constrictional stress field at the time of vein opening where σ1 and σ2 were near horizontal, (directed NNW–SSE and ENE–WSW, respectively), and σ3 was near vertical. 3-D Mohr circle analysis demonstrates that σ2 was approximately 67% of σ1 (the stress ratio) and that the driving pressure ratio (R′) was approximately 0.4, reflecting the role of fluid pressure, mean stress, and the maximum shear stress in controlling conditions of fracture opening.  相似文献   

20.
This paper presents the first release of an Informational System（IS）devoted to the systematic collection of all available data relating to Pliocene-Quaternary faults in southern East Siberia,their critical analysis and their seismotectonic parameterization.The final goal of this project is to form a new base for improving the assessment of seismic hazard and other natural processes associated with crustal deformation.The presented IS has been exploited to create a relational database of active and conditionally active faults in southern East Siberia（between 100°-114° E and 50°-57° N）whose central sector is characterized by the highly seismic Baikal rift zone.The information within the database for each fault segment is organized as distinct but intercorrelated sections（tables,texts and pictures,etc.）and can be easily visualized as HTML pages in offline browsing.The preliminary version of the database distributed free on disk already highlights the general fault pattern showing that the Holocene and historical activity is quite uniform and dominated by NE-SW and nearly E-W trending faults;the former with a prevailing dip-slip normal kinematics,while the latter structures are left-lateral strike-slip and oblique-slip（with different proportion of left-lateral and normal fault slip components）.These faults are mainly concentrated along the borders of the rift basins and are the main sources of moderate-to-strong（M≥5.5）earthquakes on the southern sectors of East Siberia in recent times.As a whole,based on analyzing the diverse fault kinematics and their variable spatial distribution with respect to the overall pattern of the tectonic structures formed and/or activated during the late Pliocene-Quaternary,we conclude they were generated under a regional stress field mainly characterized by a relatively uniform NW-SE tension,but strongly influenced by the irregular hard boundary of the old Siberian craton.The obtained inferences are in an agreement with the existing models of the development of  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号