共查询到20条相似文献，搜索用时 15 毫秒
1.
As an important part of lifeline engineering in the development and utilization of marine resources, the submarine fluid-filled pipeline is a complex coupling system which is subjected to both internal and external flow fields. By utilizing Kennard’s shell equations and combining with Helmholtz equations of flow field, the coupling equations of submarine fluid-filled pipeline for n=0 axisymmetrical wave motion are set up. Analytical expressions of wave speed are obtained for both s=1 and s=2 waves, which correspond to a fluid-dominated wave and an axial shell wave, respectively. The numerical results for wave speed and wave attenuation are obtained and discussed subsequently. It shows that the frequency depends on phase velocity, and the attenuation of this mode depends strongly on material parameters of the pipe and the internal and the external fluid fields. The characteristics of PVC pipe are studied for a comparison. The effects of shell thickness/radius ratio and density of the contained fluid on the model are also discussed. The study provides a theoretical basis and helps to accurately predict the situation of submarine pipelines, which also has practical application prospect in the field of pipeline leakage detection. 相似文献
2.
The multiple intersecting spheres (MIS) pressure hull is a logical derivative of the single unstiffened sphere, which is frequently used for deep operating, small submersibles because of its attractive low buoyancy factor. This paper investigates the optimum design of an MIS deep-submerged pressure hull subjected to hydrostatic pressure, using a powerful optimization procedure combined the extended interior penalty function method (EIPF) with the Davidon–Fletcher–Powell (DFP) method. In this study, the thickness of the shell, the width of the rib-ring, the inner radius of the rib-ring and the angle of intersection of the spherical shell are selected as design variables, and structural failure and human requirements are considered to minimize the buoyancy factor. Additionally, a sensitivity analysis is performed to study the influence of the design variables on the optimal structural strength design. The results reveal that the shell thickness is most important to lobar buckling strength, and that rib-ring width, rib-ring inner radius and spherical shell intersection angle are most important to rib-ring hoop strength. Optimization results may provide a valuable reference for designers. 相似文献
3.
After borrowing the idea of precise integration method, a precise integration transfer matrix method (PITMM) is proposed by modifying traditional transfer matrix method. The submarine hull can be modeled as joined conicalcylindrical-spherical shells. By considering the effect of the ring-stiffeners, the field transfer matrixes of shells of revolution are obtained accurately by PITMM. After assembling the field transfer matrixes into an entire matrix, the dynamic model is established to solve the dynamic responses of the joined shell. By describing the sound pressure in fluid by modified wave superposition method (MWSM) and collocating points along the meridian line of the joined shell, finally the structural and acoustic responses of a finite stiffened submarine hull can be predicted by coupled PITMM and MWSM. The effectiveness of the present method has been verified by comparing the structural and acoustic responses of the spherical shell with existing results. Furthermore, the effects of the model truncation, stiffness and thickness on the structural and acoustic responses of the submarine hull are studied. 相似文献
4.
Compacted sand–bentonite mixtures have been used as a good alternative hydraulic barrier material to compacted clays. This study presents the results of a laboratory investigation on the strength characteristics of cement-stabilized sand–bentonite (CSB) mixtures and the effects of adding small amounts of fibers and metakaolin to the mixture material for strength improvement. The strength characteristics of the mixture materials were examined using unconfined compressive strength (UCS) tests and splitting tensile strength (STS) tests, with emphasis on evaluating the effects of different proportions of bentonite, fibers, and metakaolin within the CSB mixtures with a constant value of cement content. The test results indicated that the maximum improvements in UCS and STS were all attained in the CSB mixture with 10% bentonite content, and the inclusion of fibers and metakaolin of 1% each within the same CSB mixture led to an increase in UCS of about 40 and 70%, respectively. The addition of fibers also increased the ductility of the mixture material and was more effective for the improvement of tensile strength compared to that of metakaolin. The contribution of metakaolin to early-age strength (i.e., 3 and 7 days) of CSB mixture was found to be small due to the relatively low cement content in the mixture. 相似文献
5.
《Oceanic Engineering, IEEE Journal of》2009,34(1):93-100
6.
《Marine and Petroleum Geology》2002,19(3):209-217
In Western Canada Sedimentary Basin (WCSB), large scale and focused fluid flow that caused hydrothermal dolomitization have been suggested with different timing and intensity. In this study, we conducted a petrographic and geochemical comparison between the Middle Devonian Sulphur Point and Slave Point carbonates from northwestern Alberta. The results demonstrate the presence of both an early fluid flow event associated with the Late Devonian to Mississippian Antler Orogeny as well as a later event coincident with the Late Cretaceous to Early Tertiary Laramide Orogeny. Early fluid flow event is characterized by high salinity fluids, and high temperatures and oxygen isotopic values of marine or slightly enriched values, as demonstrated in saddle dolomite from the Slave Point Formation. In contrast, later fluids that caused the precipitation of saddle dolomite in the Sulphur Point formation are characterized by having slightly saline values, comparable homogenization temperatures but more enriched δ18O values and slightly depleted δ13C signatures. Geochemical data indicate that this later hydrothermal fluid was mixture of Middle Devonian brines and radiogenic basement fluids. 相似文献
7.
AbstractIn this article, the results of an experimental study on the effect of drilling fluid on concrete-soil/rock interface shear strength in the seawater drilling environment are presented. The series of direct shear tests using a purpose-designed shear box with seawater were performed considering different types of drilling fluid and base material, various normal stress levels at the interface, and filtration times. The results indicated that bentonite drilling fluid significantly decreased the concrete-soil/rock interface shear strength while a negligibly small effect was observed for polymer drilling fluid, confirming the findings from the previous studies. It was also observed that the degree of interface shear strength reduction when using bentonite drilling fluid varied with the type of base material as well as the level of normal stress at the interface. The results also confirmed that the groundwater chemistry does not alter governing mechanism of the drilling fluids and the concrete-soil/rock interface interaction and that significant benefit can also be expected when using polymer-based drilling fluid over bentonite in terms of the side resistance of a drilled shaft in seawater drilling environment as well. 相似文献
8.
耐压舱设计是水下机器人的核心技术之一,其极限承载力研究是核心中的核心。针对球壳封盖加柱形壳体耐压舱,现行标准对于初始导入缺陷数值的确定往往过于保守,对于耐压舱体数量较多的无人潜水器来说,过大的设计质量是总体设计所无法接受的。首先采用装配体整体建模策略,建立复合屈曲的受力模型,将三大非线性影响因素同时引入到极限承载力研究中,提升了计算精度。然后分别针对确定性缺陷和非确定性缺陷结构开展极限承载力研究。最后,提出以0.23%的初始缺陷导入尺度作为球壳封盖加圆柱壳体的耐压壳体缺陷导入参数,给出了导入尺度的计算方法,并借助水压试验对上述参数的准确性进行验证。 相似文献
9.
10.
11.
砗磲是海洋中最大的双壳类贝壳,其碳酸盐壳体通常具有年纹层和天纹层,是一种理想的高分辨率古气候研究载体.氧同位素是砗磲古气候研究中最常用的指标之一,但在将其应用于古气候重建之前,通常需要对其现代地球化学过程进行准确的校准.帕劳群岛位于西太平洋暖池西北边缘,其珊瑚礁盘具有丰富的砗磲壳体资源,为开展古气候研究提供了丰富的材料... 相似文献
12.
环肋圆柱壳体在水下冲击波作用下的动力弹塑性屈曲 总被引：1，自引：0，他引：1
本文以加肋圆柱壳体为对象建立力学模型，在水下爆炸产生的冲击波作用下，考虑流体与结构的耦合效应，研究加肋圆柱壳体的弹塑性失稳变形量及动力响应特性。数值分析显示出的最终变形形状和压力变化过程与实验资料一致的 相似文献
13.
《Journal of Sea Research》1999,41(1-2):149-161
Nacella concinna is the most conspicuous macroinvertebrate in the intertidal of King George Island. An important predator, the Kelp gull Larus dominicanus, feeds on Nacella during spring low tides. The gulls deposit empty Nacella shells as regurgitates mainly on roosts on coastal rocks. The regurgitates were found to consist of 40% shell fragments by weight and 60% intact shells. Faeces of Kelp gulls contained much smaller fragments than the regurgitates. Some of the Nacella, particularly those too large to ingest, are handled in the intertidal. The middens are, therefore, inadequate to study size selection by Kelp gulls: the largest Nacella are underrepresented. Seventy-five per cent of the intact Nacella shells from the Larus middens showed one or more shell repairs. Such repairs may be due to unsuccessful attacks by gulls, but more probably they indicate damage caused by rolling ice blocks and stones in the intertidal and shallow subtidal. A number of living Nacella were found stranded on the beach, detached from the rocks. They showed damage along the shell margin and even one Nacella was collected without any shell left. The observed repair frequency of 75% in Nacella was much higher than in other (smaller) intertidal gastropods at Potter Peninsula (3–11%, av. 8%). Comparably high frequencies are observed for instance in tropical intertidal gastropods, where repair is due to heavy unsuccessful crab predation; however, shell-crushing crabs are absent on King George Island. This indicates that palaeontologists should be cautious in ascribing all shell repairs in fossil shells (particularly from tidal environments) to predators. Shell repair in the related Nacella deaurata, collected in a less exposed site at Port Stanley (Falkland Islands), occurred only in 13% of the specimens. Another conspicuous form of shell damage was due to grazing by Nacella on the boring algae living in other Nacella shells. Epigrowth of crustose calcareous algae inhibited such grazing, but in the absence of epigrowth deep hollows were scraped in the shells, the parallel scratches by the radula clearly visible, urging Nacella to repair its shell by producing more shelly material on the inside. 相似文献
14.
环肋圆柱壳是深海无人系统广泛采用的一种耐压结构形式,保障其结构安全是系统研制过程中非常重要的一环。针对环肋圆柱壳的结构特征推导了组合结构重量关系式和结构参数简化估算方法,并以一种超长型深海无人系统耐压结构为例,围绕大长径比环肋圆柱壳的结构形式、设计计算、仿真分析、模型验证等开展研究。研究表明提出的大长径比环肋圆柱壳结构设计参数简化估算方法具有较好的适应性。相关计算和分析结果可以为该型深海无人系统结构设计提供技术支撑,也可以为其他类似耐压结构设计提供参考。 相似文献
15.
深海潜器常携带中空浮球来为其提供浮力。陶瓷因其高强度、低密度等优点成为浮球的理想材料。然而,中空结构在外部高压环境下易发生内爆,产生的内爆波会对周围结构产生毁灭性损害。为了探索浮球内部初始气压对内爆波的影响,首先,利用气泡动力学对其不考虑球壳影响时进行理论分析,得到内爆波压力脉冲沿径向以指数?1 衰减,并指出其物理意义和隐含假设,进而从能量分析得到增加内压使压缩空气消耗的能量增加,从而减弱释放到水中的压力波能量;其次,采用三相流固耦合有限元模型进行计算,考虑水的可压缩性和球壳因挤压引起的脆性破裂的影响,得到更为接近实际的内爆压力的分布。由于两侧挤压球壳,外部的水在不断扩大的缺口处产生向内的射流,造成内部气体非球形塌缩,后续压力波呈现出与球壳碎裂方式有关的方向性差异。通过有限元模型对内部初始气压的研究表明,增加初始内部气体压力到 1 MPa 时,压力脉冲在球壳表面处下降了 15. 6%~24. 8%。这一结果表明,在几乎不增加浮球质量的条件下,增加内部初始气压具有很好地抑制近端内爆波强度的效果。 相似文献
16.
红壳色文蛤选育子代各壳色的形态分化及养殖效果的比较 总被引：2，自引：0，他引：2
以红壳色为目标性状,于2009年进行了文蛤(Meretrix meretrix)的群体选育研究,建立了红壳色选系子一代(Fl),对子一代壳色种类、分布频率及其数量性状进行了统计、测量和分析,并对各壳色的形态、生长速度做了研究.结果表明,文蛤壳色具有多态性,红色、黄色、白双、黄双、波纹的分布频率分别为75.58%、8.55%、0.53%、14.83%、0.50%.红壳色亲本的子代中出现红色∶花色=3∶1,符合孟德尔遗传模式.聚类分析与欧氏距离矩阵结果表明,文蛤波纹与黄色遗传距离最近,白双与黄双遗传距离相近,与红壳色的遗传距离最远.主成分分析显示白双文蛤与黄双文蛤在空间分布上相对重叠,波纹文蛤与黄色文蛤具有较高的重叠率,而红壳色文蛤相对分散,从而进一步说明5种壳色文蛤的遗传距离关系.经过1a同池养殖,子代壳长多数已达到10～30 mm,红壳色文蛤的日生长率为0.20%,花壳色文蛤的日生长率为0.18%,且红壳色文蛤的相对比较生长速度比花壳色文蛤快10.41%.红壳色文蛤选育子代的壳长与壳宽、壳高、粒重存在一定的回归关系.红壳色文蛤壳长对壳宽、壳高、粒重的回归方程分别为:y1=0.502 4x1-0.556 0(R2=0.992 0)、y3=0.8103x3+0.620 0(R2=0.995 6)、y5=0.000 3x25.9029(R2=0.991 9),花壳色文蛤壳长对壳宽、壳高、粒重的回归方程分别为:y2=0.495 3x2-0.419 2(R2=0.990 9)、y4=0.798 5x4+0.793 5(R2=0.995 6)、y6=0.000 4x26.845 8(R2=0.993 4).研究结果为文蛤的红壳色定向选育奠定了理论基础. 相似文献
17.
Marcello A. Mannino Kenneth D. Thomas Melanie J. Leng Hilary J. Sloane 《Geo-Marine Letters》2008,28(5-6):309-325
Shells of the rocky shore intertidal gastropod Osilinus turbinatus (von Born), often abundant in archaeological deposits in the Mediterranean region, are a potential source of data on palaeotemperature, palaeoseasonality and archaeological seasonality. To evaluate this species as a climate archive, investigations of annual patterns of shell growth and of monthly variations in oxygen isotopes in shell carbonates were made on different populations in NW Sicily. Mark-recapture experiments at San Vito lo Capo and Mazzaforno show that O. turbinatus grows almost continuously throughout the year but at different rates in different seasons. Around 75% of the yearly shell growth occurs in the autumn and winter. On average, larger/older shells produce narrower annual growth increments than smaller/younger ones. Conspicuous growth lines in larger/older shells show that growth stops during the hottest part of the summer. Oxygen isotope analyses on monthly collected shells of O. turbinatus from three shores (Cala Grande, Monte Cofano and Mazzaforno) show that the isotope values record temperature variations through the year. In all the datasets, surface seawater temperatures (SSTs) calculated from δ18OSHELL mostly underestimate measured SSTs, offsets being generally greater in summer. Minimum annual offsets range from 0.0°C to 0.7°C and maximum annual offsets from 3.1°C to 8.7°C. δ18OSHELL values fail to record temperatures higher than 25°C. Careful selection of shells to be analysed can reduce offsets between δ18OSHELL temperature estimates and measured SSTs for many parts of the year, except the hottest. Allowing for this, shells of O. turbinatus offer good potential as climate archives and for archaeological studies of seasonal patterns of human foraging for shellfish. 相似文献
18.
While the elemental chemistry of marine mollusk shells contains valuable environmental information, extending these interpretations to freshwater bivalve shells may be problematic, given the wide range of aqueous chemistries that exist in freshwater environments. To better understand the significance of these records, 20 bivalves were collected from four freshwater streams to determine the geochemical relationships that exist between the bivalve shell and their sources streams. The concentrations of manganese (Mn), copper (Cu), strontium (Sr), barium (Ba), and calcium (Ca) were analyzed by laser ablation inductively coupled plasma mass spectrometry across the inner (INL) and outer nacreous layer (ONL) of each shell for comparison to stream data collected over the period of shell growth. Within an individual shell, the content of Mn, Sr, and Ba were significantly higher in the INL than the ONL, while Cu concentrations were similar. Strontium and Ba concentrations co-varied between the two layers in 1:1 relationships, while Mn displayed a preferential enrichment in the INL that increased from 2:1 to 5:1 as the Mn content of the shell decreased. Each elemental profile can be correlated between shell layers, except for the trace element Cu, which appeared to be more closely related to the organic content of the shell. These results suggest that the major element geochemistry of the shell layers differentially reflect the aqueous chemistry of the water in which a bivalve lived, but that these records are most likely overprinted by physiological processes specific to the mantle tissue from which a particular shell layer is secreted. Distribution coefficients (shell M /Ca:water M /Ca, where M?=?trace element of interest) were calculated using the median molar elemental concentration for each shell (by layer), and the appropriate water concentration. Bivalves from a contaminated site were excluded from this analysis because their shells were anomalous in size and color. For the remaining 15 shells, distribution coefficients (INL and ONL) were: Mn (0.50 and 0.21), Sr (0.26 and 0.17), and Ba (0.05: INL only). Inner nacreous layer values were comparable to the upper end of published estimates for freshwater bivalves and fish otoliths, while the ONL values were comparable to the lower range of values. Inclusion of shells from the contaminated site resulted in the calculation of distribution coefficients that fell outside the range of published estimates. These results suggest that exposure to pollutants may have a bearing on the biological factors that control the elemental concentration of bivalve shells in freshwater environments. While researchers generally avoid sampling shell material from the INL because of the potential for shell dissolution, the similarity in elemental profile trends observed here suggests that both the INL and ONL record accurate geochemical information, but in distinct forms. An obvious advantage of INL analysis is the relative increase in elemental concentration, but this is afforded at the expense of spatial resolution. Considered collectively, these results suggest that valuable information can be gleaned from the elemental concentration of freshwater bivalve shells when care is taken in the choice of material from which these records are extracted. 相似文献
19.
20.
Based on a procedure which couples the finite element method with the doubly asymptotic approximation, this work addresses the problem of the transient responses of a submerged spherical shell subjected to strong, plane, incident shock waves, in which elastoplastic material behavior is considered. Simulation results indicate that the procedure adopted shows good agreement with related literature, which considered linear elastic behavior of the shell. Also presented herein are the time histories of surface pressure, radial velocity and von Mises stress of the shell. Moreover, deformation diagrams and spreading of the plastic zone of the shell are described as well. 相似文献