首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 49 毫秒
1.
The Advanced Marine Systems Lab at Florida Atlantic University has developed a new ultramodular plastic mini autonomous underwater vehicle (AUV), called the Morpheus, for littoral military and coastal oceanographic sampling, survey, and mapping. The name Morpheus was chosen because the Greek god Morpheus could change shape or "morph." The higher degree of modularity of the Morpheus AUV allows it to "morph" or change its size and components for different applications. This vehicle is composed of modular injection-molded plastic pressure vessels and a cabling system that allow the modules to be rearranged without rewiring bulkheads. The plastic pressure vessels are inexpensive, inherently mass-producible, extremely corrosion-resistant, and have low magnetic signatures. The pressure vessels are small but are sized to fit most standard electronic board standards. The mini AUV can be anywhere from 4 to 10 ft in length, depending on its mission. The vehicle architecture is an adaptation of the Ocean Explorer AUV system and uses an ANSI 709.1 (LonTalk) distributed control network for connecting all sensors and actuator subsystems as smart nodes. The modularity in containers, control, and power makes this vehicle rapidly reconfigurable and easy to repair or upgrade. This paper will present details of the motivation, design, and construction of the new mini AUV. The Morpheus was deployed during the summer of 2000 in field exercises for very shallow and shallow water mine counter measures. Some results from these tests will be presented  相似文献   

2.
This paper presents a discrete-time quasi-sliding mode controller for an autonomous underwater vehicle (AUV) in the presence of parameter uncertainties and a long sampling interval. The AUV, named VORAM, is used as a model for the verification of the proposed control algorithm. Simulations of depth control and contouring control are performed for a numerical model of the AUV with full nonlinear equations of motion to verify the effectiveness of the proposed control schemes when the vehicle has a long sampling interval. By using the discrete-time quasi-sliding mode control law, experiments on depth control of the AUV are performed in a towing tank. The controller makes the system stable in the presence of system uncertainties and even external disturbances without any observer nor any predictor producing high rate estimates of vehicle states. As the sampling interval becomes large, the effectiveness of the proposed control law is more prominent when compared with the conventional sliding mode controller  相似文献   

3.
The problem of controlling an autonomous underwater vehicle (AUV) in a diving maneuver is addressed. Having a simple controller which performs satisfactorily in the presence of dynamical uncertainties calls for a design using the sliding mode approach, based on a dominant linear model and bounds on the nonlinear perturbations of the dynamics. Nonadaptive and adaptive techniques are considered, leading to the design of robust controllers that can adjust to changing dynamics and operating conditions. The problem of using the observed state in the control design is addressed, leading to a sliding mode control system based on input-output signals in terms of drive-phase command and depth measurement. Numerical simulations using a full set of nonlinear equations of motion show the effectiveness of the proposed techniques  相似文献   

4.
The Naval Postgraduate School (NPS) is constructing a small autonomous underwater vehicle (AUV) with an onboard mission control computer. The mission controller software for this vehicle is a knowledge-based artificial intelligence (AI) system requiring thorough analysis and testing before the AUV is operational. The manner in which rapid prototyping of this software has been demonstrated by developing a controller code on a LISP machine and using an Ethernet link with a graphics workstation to simulate the controller's environment is discussed. The development of a testing simulator using a knowledge engineering environment (KEE) expert system shell that examines AUV controller subsystems and vehicle models before integrating them with the full AUV for its test environment missions is discussed. This AUV simulator utilizes an interactive mission planning control console and is fully autonomous once initial parameters are selected  相似文献   

5.
The design of an autonomous underwater vehicle (AUV) involves complex tradeoffs among various design variables and mission requirements. Particularly important are the selection of a suitable energy source and the sensitivity of vehicle dimensional characteristics to mission requirements. A method of comparison based on an approximate but comprehensive approach which refers to specific parameters derivable from known designs or literature is suggested. Specific energy and energy density of candidate systems are derived with due consideration to depth-resistant vessels. The impact of the energy system choice is highlighted, going beyond simply comparing the former parameters. A design model has been developed, allowing quick sensitivity and mass-volume breakdown of alternative configurations under varying mission requirements; these are exemplified with reference to a design case. The procedure allows the correct specification of power, energy, and surface-handling systems for more detailed comparative analyses, given a common project goal and a basis for realistic cost comparison. The results show wide differences in the energy capacity of AUVs complying with identical mission data, but using with different energy systems. It is concluded that rechargeable electric batteries, even of high energy density, result in unacceptably heavy vehicles for ranges around 1000 km unless very low drag characteristics are achieved. Closed-cycle diesel and fuel cell systems allow the AUV mass to be kept below 10 t  相似文献   

6.
In this paper, we examine the issues associated with docking autonomous underwater vehicles (AUVs) operating within an Autonomous Ocean Sampling Network (AOSN). We present a system based upon an acoustic ultrashort baseline system that allows the AUV to approach the dock from any direction. A passive latch on the AUV and a pole on the dock accomplish the task of mechanically docking the vehicle. We show that our technique for homing is extremely robust in the face of the two dominant sources of error-namely the presence of currents and the presence of magnetic anomalies. Our strategy for homing is independent of the initial bearing of the dock to the AUV, includes a method for detecting when the vehicle has missed the dock, and automatically ensures that the AUV is in a position to retry homing with a greater chance of success. Our approach is seen to be extremely successful in homing the vehicle to the dock, mechanically attaching itself to the dock, aligning inductive cores for data and power transfer, and undocking at the start of a fresh mission. Once the AUV is on the dock, we present a methodology that allows us to achieve the complex tasks with ensuring that the AUV is securely docked, periodically checking vehicle status, reacting to a vehicle that requires charging, tracking it when it is out on a mission, archiving and transmitting via satellite the data that the AUV collects during its missions, as well as providing a mechanism for researchers removed from the site to learn about vehicle status and command high-level missions. The dock is capable of long-term deployments at a remote site while respecting the constraints - low power, small size, low computational energy, low bandwidth, and little or no user input - imposed by the amalgamation of acoustic, electronic and mechanical components that comprise the entire system  相似文献   

7.
根据调查设备搭载器的不同,将海底管道在位状态调查方法归为船载、自治水下机器人搭载(AUV 搭载)和无人遥控潜水器搭载(ROV搭载)三类;在浅水段采用船载调查,在深水段采用AUV搭载调查,在此基础上进行重点关注区域筛选,开展ROV调查,最后进行整体评价和分析对比,这种“(船载/AUV)+ROV”组合模式很好地实现了多种调查方法的优势互补。实际上,采用AUV搭载进行海底管道在位状态调查在国内业界尚属首次。调查所取得的管道位置、埋深、周边障碍物的分布以及管道人工处理情况等成果,为后期开展管道维护工作提供了重要的基础数据。此次成功实践可为以后从浅水到深水的管道在位状态调查提供经验和借鉴。  相似文献   

8.
The present paper introduces a three-dimensional guidance system developed for a miniature Autonomous Underwater Vehicle（AUV）. The guidance system determines the best trajectory for the vehicle based on target behavior and vehicle capabilities. The dynamic model of this novel AUV is derived based on its special characteristics such as the horizontal posture and the independent diving mechanism. To design the guidance strategy, the main idea is to select the desired depth, presumed proportional to the horizontal distance of the AUV and the target. By connecting the two with a straight line, this strategy helps the AUV move in a trajectory sufficiently close to this line. The adjacency of the trajectory to the line leads to reasonably short travelling distances and avoids unsafe areas. Autopilots are designed using sliding mode controller. Two different engagement geometries are considered to evaluate the strategy＇s performance： stationary target and moving target. The simulation results show that the strategy can provide sufficiently fast and smooth trajectories in both target situations.  相似文献   

9.
Central to the successful operation of an autonomous undersea vehicle (AUV) is the capability to return from a mission, in that there is consistent recovery or docking of the AUV. In addition, some missions may require communication with and power transfer to the AUV after docking. This paper describes an inductive system that provides a nonintrusive power and communications interface between the dock and the AUV. The system makes up to 200 W of AC or DC power available to the AUV. The communications interface is 10BaseT Ethernet and is platform- and protocol-independent. The overall design of the system is given as well as results from wet laboratory and field tests  相似文献   

10.
The authors focus on demonstrating a simple design procedure for the Odyssey III autonomous underwater vehicle (AUV) flight control system. This procedure can be carried out quickly and routinely to maximize vehicle effectiveness. A hydrodynamic model of the vehicle was first developed from theory and bench-top laboratory tests. Using this initial model, a controller was developed from basic principles. Then, using this initial controller to reach a desired typical operating condition, a very compact set of open-loop maneuvers was performed in the field. The vehicle model was optimized using the Nelder-Mead simplex method, and a revised controller was then implemented and tested successfully.  相似文献   

11.
The hydrodynamic interaction between an Autonomous Underwater Vehicle (AUV) manoeuvring in close proximity to a larger underwater vehicle can cause rapid changes in the motion of the AUV. This interaction can lead to mission failure and possible vehicle collision. Being self-piloted and comparatively small, an AUV is more susceptible to these interaction effects than the larger body. In an aim to predict the manoeuvring performance of an AUV under the effects of the interaction, the Australian Maritime College (AMC) has conducted a series of computer simulations and captive model experiments. A numerical model was developed to simulate pure sway motion of an AUV at different lateral and longitudinal positions relative to a larger underwater vehicle using Computational Fluid Dynamics (CFDs). The variables investigated include the surge force, sway force and the yaw moment coefficients acting on the AUV due to interaction effects, which were in turn validated against experimental results. A simplified method is presented to obtain the hydrodynamic coefficients of an AUV when operating close to a larger underwater body by transforming the single body hydrodynamic coefficients of the AUV using the steady-state interaction forces. This method is considerably less time consuming than traditional methods. Furthermore, the inverse of this method (i.e. to obtain the steady state interaction force) is also presented to obtain the steady-state interaction force at multiple lateral separations efficiently. Both the CFD model and the simplified methods have been validated against the experimental data and are capable of providing adequate interaction predictions. Such methods are critical for accurate prediction of vehicle performance under varying conditions present in real life.  相似文献   

12.
HAISHEN is a long-ranged and highly maneuverable AUV which has two operating modes: glider mode and flapping-foil propulsion mode. As part of the vehicle development, a three-dimensional mathematical model of the conceptual vehicle was developed on the assumption that HAISHEN has a rigid body with two independently controlled oscillating hydrofoils. A flapping-foil model was developed based on the work done by Georgiades et al. (2009). Effect of controllable hydrofoils on the vehicle stable motion performance was studied theoretically. Finally, a dynamics simulation of the vehicle in both operating modes is created in this paper. The simulation demonstrates that: (1) in the glider mode, owing to the independent control of the pitch angle of each hydrofoil, HAISHEN travels faster and more efficiently and has a smaller turning radius than conventional fix-winged gliders; (2) in the flapping-foil propulsion mode, HAISHEN has a high maneuverability with a turning radius smaller than 15 m and a forward motion velocity about 1.8 m/s; (3) the vehicle is stable under all expected operating conditions.  相似文献   

13.
海底峡谷是陆源物质向深海运移的重要通道.对于远离陆地的海底峡谷,通常认为浊流是物质搬运的主要营力.受限于探测精度和复杂作业环境影响,使用常规地球物理资料对深水海底峡谷尤其是对谷底沉积体的形态和结构特征的刻画不够精细.基于水下自主航行器(AUV,Autonomous Underwater Vehicle)采集的高分辨率多...  相似文献   

14.
针对自主水下机器人的路径规划问题,提出一种基于双频识别侧扫声呐(DIDSON)的全局路径规划算法。根据双频识别侧扫声呐的物理特性对AUV进行数学建模,根据声呐的工作频率不同,将AUV分为高频、低频两种工作模式。高频模式下成像精度高,低频模式下成像范围大。文中提出了一种D2-CPP算法,根据声呐返回的识别结果,算法会自主切换AUV的工作模式,并动态规划出对应的路径点,直到覆盖所有区域。通过与割草机算法的仿真对比,证明了算法的有效性,近海实验证明了算法的可靠性。  相似文献   

15.
An Odyssey IIb autonomous underwater vehicle (AUV) made by Bluefin Robotics, Inc., was acquired by the Marine Physical Laboratory, Scripps Institution of Oceanography, to conduct research in underwater acoustics as well as provide a platform for other scientific studies. The original Odyssey IIb tail cone was replaced with a ducted fan, vectored thrust system installed on vehicles currently sold by Bluefin. In initial sea tests with the new thrust system, the acoustic self noise levels of the vehicle while underway were 20 to 50 dB higher than typical ocean background noise levels, preventing the vehicle's use as a receiver of low level sounds. Controlled tests were performed to characterize the radiated and vibration noise of the AUV propulsion and actuators. Once this baseline was established, changes were made, mostly to the tail cone propulsion, to decrease the vehicle's self noise. The resulting self noise levels of the AUV from 10 Hz up to 10 kHz measured while underway by a hydrophone mounted on the AUV's inner shroud now are at or below typical shallow water background noise levels except in three bands; below 250 Hz, around 500 Hz, and from 0.9 to 2.0 kHz. The goal of this paper is to describe these changes and their effects in lowering vehicle noise levels.  相似文献   

16.
Nonlinear path-following control of an AUV   总被引：3，自引：0，他引：3  
A new type of control law is developed to steer an autonomous underwater vehicle (AUV) along a desired path. The methodology adopted for path-following deals explicitly with vehicle dynamics. Furthermore, it overcomes stringent initial condition constraints that are present in a number of path-following control strategies described in the literature. Controller design builds on Lyapunov theory and backstepping techniques. The resulting nonlinear feedback control law yields convergence of the path-following error trajectory to zero. Simulation results illustrate the performance of the control system proposed.  相似文献   

17.
Analysis of a craft with two degrees of freedom (2DOF) consumes time more than simulation of a craft with a fixed trim condition; therefore in most of the previous researches fixed trim condition is taken into account to analyze the flow field around a craft in shallow water and head sea wave conditions. In this paper numerical simulation of Reynolds Average Naiver Stokes (RANS) equations are used to analyze the motion of DTMB 62 model 4667-1 planing vessel in calm water and head sea waves in both deep and shallow water with two degrees of freedom (heave and pitch). For this purpose, a finite volume ANSYS-FLUENT code is used to solve the Navier-Stokes equations for the simulation of the flow field around the vessel. In addition, an explicit VOF scheme and SST k-ω model is used with dynamic mesh scheme to capture the interface of a two-phase flow and to model the turbulence respectively in the 2DOF model.Regarding the results, reducing the wavelength and also the depth of the water can increase the drag force. Also comparing the results of a fixed trim vessel with the results of a free to sink and trim one in calm water shows a difference of approximately 50% in the drag force in shallow water.  相似文献   

18.
The Korea Ocean Research and Development Institute (KORDI) has developed a small AUV named ISiMI. The mission of ISiMI is to work as a test-bed AUV for the development and validation of various algorithms and instruments required to enhance the AUV's functions. The design concept of ISiMI is that of a vehicle small enough to cruise the Ocean Engineering Basin (OEB) of KORDI and to be handled by one or two people. The downsized design and the cruising ability in its tank enable fast experimental feedback on AUV technologies and a shorter development period for new technologies. This paper presents a review of our research work on the development of ISiMI, with a performance evaluation by simulation and an experimental test. After the design and implementation of ISiMI, including its positioning system in the OEB, are presented, a series of test results in the OEB and discussions of the results are presented, with comparisons of the simulation and experimental outputs.  相似文献   

19.
混合驱动自主潜航器融合了自主潜航器机动灵活和水下滑翔机续航能力强的优点,针对自身携带能源有限的问题,对在两种工作模式下如何实现最大航行距离进行了研究.从航行过程中的能源消耗入手,得出航行距离与速度、电子设备功率等的关系,通过理论分析和仿真手段得出最大续航能力的实现方法.在螺旋桨驱动模式下,当以经济航速航行时,可以达到最大航行距离;在浮力驱动模式下,当以最大滑翔效率航行时,水平方向上的滑翔距离最大,并且水平方向上的滑翔距离随着剖面深度的增大而增大,当剖面深度大到一定程度之后,最大滑翔距离趋于恒定.该研究方法可为类似水下航行器电源管理系统的能源分配提供参考,也可为航行器外形的设计和传感器的选型提供理论指导.  相似文献   

20.
This paper describes a controlled self-motion study recently carried out using a small autonomous underwater vehicle (AUV) in a controlled environment in which regular and random waves can be generated accurately for various frequencies and heights. In this study, the AUV was one of the Florida Atlantic University's Ocean Explorer series vehicles, and the controlled environment was chosen to be the Maneuvering And Sea-Keeping (MASK) facilities located at the David Taylor Model Basin. During the entire study, 29 sets of experimental motion and wave data were collected under various wave frequencies and heights, vehicle alignment, and operating depths. Due to the wave tank constraint, the vehicle speed was restricted to be less than 1.5 m/s and the wave frequency higher than 0.3 Hz without significantly affecting the self-motion analysis. Time history and power spectral density results suggest that the roll-induced pitching response was considerably larger for the wave frequencies tested, as compared to the pitch-induced rolling response. Standard deviation results reveal that the existing OEX is capable of producing approximately 3° (peak-to-peak) pitch, 0.7° (peak-to-peak) roll, and 0.6° (peak-to-peak) yaw at 2-m depth in the head-sea condition when the encountering wave frequency is close to 0.4 Hz. However, at 1.5-m vehicle depth, significant surges were observed in pitching and rolling motion, suggesting that the OEX is currently unsuitable to maintain accurate depth-following within this range at sea-state 2 or higher. It is hoped that the results presented can provide better insights into how a small AUV with a nonideal body shape reacts to waves of different sea states, and how vehicle self-motion can be streamlined by choosing proper vehicle speed, heading, and depth, given that the wave characteristics are available  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号