共查询到20条相似文献，搜索用时 15 毫秒
1.
Considering the geomechanical characteristics of rocks which are a mixture of rock blocks embedded in fine grain matrix can be challenging due to their complex structure and difficulty in preparing representative in situ or laboratory samples. In the literature, this group of rocks is called block in matrix Rocks (bimrocks). In this paper, the effects of volumetric block proportion (VBP), maximum block size, and distribution function on the compressive strength and failure patterns of these rocks were considered by executing the unconfined compressive test on large-scale synthetic samples. The compressive strength of bimrocks was found to have a direct relation with VBP and maximum block size and an indirect one with fractal dimension in accordance with multivariable regression analysis. The fracture patterns of remolded samples were changed from an inter-granular facture to a matrix and between-granular one by the reducing the VBP and increasing the fractal dimension. In addition, the failure mechanism was spalling for the low values of VBP and the high values of fractal dimension and it was changed to shear failure by increasing VBP and decreasing fractal dimension. 相似文献
2.
ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｃｏｍｐｒｅｓｓｉｏｎａｌｗａｖｅｖｅｌｏｃｉｔｙ（ｖｐ）ｉｎｒｏｃｋｍｅａｓｕｒｅｄａｔｈｉｇｈｐｒｅｓｓｕｒｅａｎｄｈｉｇｈｔｅｍｐｅｒａｔｕｒｅｉｓｏｆｓｉｇｎｉｆｉｃａｎｔｉｍｐｏｒ－ｔａｎｃｅｔｏｅｌｕｃｉｄａ... 相似文献
3.
以岩石物理理论为基础,在变温、变压条件下对塔河油田志留系和泥盆系岩样进行超声波纵、横波速度及密度测定,岩石物理试验表明塔河油田饱水岩样、饱油岩样和泥岩,纵波速度和横波速度都具有很好的线性关系,岩石的纵横波速度均随着温度压力的增加而增大。干岩石以及饱含水岩石的纵横波速度均随着岩石孔隙度的增加而变小。采用Shuey近似理论,根据测定的岩石物理参数,进行了AVO正演模拟,结果表明塔河地区研究目的层的AVO异常类型属于第一类。 相似文献
4.
本文在特殊地质填图的过程中研究了哈密地区砂岩的地震波速,利用ZBL-U520非金属超声检测仪和Autolab2000多功能岩石物性设备,在0~200 MPa(约0~7000 m地下深度)下研究了密度、孔隙度和压力三个因素对砂岩地震波速的影响。研究发现:砂岩的波速与密度呈正相关关系,但与孔隙度呈负相关关系;纵波与密度和孔隙度的线性关系好于横波;波速与压力呈对数关系。此外,本文还分析了ZBL-U520与Autolab2000两种仪器测试方法的适用性。最后针对地质填图的特点给出建议:在特殊地质填图中,不仅要按照规范采集标本,测试其在常温常压下的岩石波速,还应该适当考察不同地层压力状态下的速度特征,才能更全面地认识填图区地震波的性质。 相似文献
5.
岩石的主要物理机械性质与岩石可钻性相关性的试验研究 总被引：1，自引：0，他引：1
本试验研究共钻进78种岩石,803块岩样,完成868个钻孔,总进尺82m左右。测试了岩石的压入硬度、研磨性、塑性系数、声学特性等性质,共取得各种测试数据8570个.在BCM—Ⅲ型微机上,对其数据进行了数理统计,建立了以岩石压入硬度、研磨性和塑性系数为主因子的岩石可钻性预测方程,方程的预估精度达80％左右。 相似文献
6.
Correlating Wave Velocities with Physical,Mechanical Properties and Petrographic Characteristics of Peridotites from the Central Greece 总被引：2，自引：1，他引：1
K. Diamantis S. Bellas G. Migiros E. Gartzos 《Geotechnical and Geological Engineering》2011,29(6):1049-1062
Knowledge of compressional and shear wave velocities is necessary to estimate the physical, dynamic and mechanical properties
of rocks with an indirect, but easy, fast and economical way. Although, many attempts have been made to correlate the wave
velocities with the rock characteristics, only few studies have been concentrated on ultrabasic rocks and especially on peridotites.
The aim of this study is to apply correlation analysis to investigate the relationships between wave velocities and rock properties
for peridotites. Thus, 35 fresh peridotite samples (non or slightly serpentinized ultrabasic rocks), taken from the western
part of Othrys mt and the Kallidromo mt (central Greece) were tested. The relationships between P and S wave velocities and the rock properties are described by simple regression analyses and the confidence intervals are presented
as well. The study reveals strong positive, linear correlations between the P and S wave velocities. Positive, linear relationships are also indicated between wave velocities and unit weight and mechanical
properties, while the increase of effective porosity causes decrease of the wave velocities. The wave velocities are exponentially
affected with serpentinization percentage, while the best fit equations between wave velocities and primary minerals are logarithmic.
The wave velocities and the micropetrographic index Ips are strongly correlated by both exponential and linear functions, but exponential trends present higher determination coefficients. 相似文献
7.
The Peloritani Mountain Belt (north-eastern Sicily) represents the connection between the Southern Appenninic Range and the Appenninic Maghrebid Chain. The lithotypes outcropping in a 36 km long and approximately 8 km wide area in the eastern part of the Peloritani Mountains are considered to represent most properly the composition of the lower crust. We selected 7 representative samples of silicate rocks (amphibolite, paragneisses, augen gneiss, phyllitic quartzite, pegmatitic rock) and 3 samples of calcite rocks (calc-schist, marbles) for the petrophysical measurements. Measurements were done on sample cubes of dry rocks in a multi-anvil apparatus. Raising of pressure gives rise to velocity increase, but the rate is different in the silicate and calcite rocks and closely related to progressive closure of microcracks. Linear behaviour is approached above about 200 MPa. Increasing temperature at 600 MPa decreases velocities in most silicate and in the calcite rocks with almost linear slopes. Substantial anisotropy of P- and S-wave velocities and shear wave splitting is found in both rock types. The residual anisotropy observed above about 200 MPa is attributed to lattice preferred orientations (LPO) of major minerals. 3D velocity calculations for an amphibolite, a paragneiss and a marble sample based on the LPO of hornblende, biotite and calcite, respectively, confirm the experimental findings of a close relationship between velocity anisotropy, shear wave splitting, shear wave polarization, lattice preferred orientation and the structural frame of the rocks (foliation, lineation). In the silicate rocks, the intrinsic (600 MPa) average P-wave velocities and Poisson's (Vp / Vs) ratios exhibit a tendency for a linear increase with densities, whereas the three calcite rocks cluster at markedly higher P-wave velocities and Poisson's (Vp / Vs) ratios, compared to their densities. In the silicate rocks, there is also a linear trend for an inverse relationship between the SiO2 content, density and the Poisson's (Vp / Vs) ratio, respectively. 相似文献
8.
《International Geology Review》2012,54(4):363-374
The Ana Yatak massive sulfide deposit is located in the Ergani-Maden District of southeastern Turkey and has been a major source of copper for more than 4,000 years. The mineralization is hosted by strongly chloritized serpentinite, gabbro, diabase, and mud-stone. The ore body is ～600 × 250 m in maximum dimension, mainly consists of pyrite and chalcopyrite, and locally contains abundant magnetite, pyrrhotite, and chromite. The gangue contains predominantly chlorite, rarely quartz. This paper is mainly concerned with an investigation of the sulfur-isotope systematics of the Ana Yatak deposit. Pyrite and chalcopyrite from the ore and pyrite from the host rocks were sampled and analyzed to determine their δ34S composition. δ34S values were found to vary within the range from +4.5 to + 9.3‰ for pyrites (mean δ34S = + 6.5 ± 1.8) and from +4.5 to +10.0 for chalcopyrites (mean δ34S = +6.7 ± 1.9) of the ore, and from +5.8 to +8.8 for pyrites (mean δ34S = + 7.3 ± 1.3) of the host rock. The δ34S compositions of all samples were found to vary from +4.5 to +10.0‰. For the chalcopyrite-pyrite pairs, there is a clear relationship of approximately equal δ34S values at each sampling site. Frequency distribution of the δ34S values is not unimodal and exhibits two peaks. The range of sulfur-isotope systematics implies that the Ana Yatak mineralization was influenced to a greater extent by seawater than by hydrothermal fluids. 相似文献
9.
10.
A. A. Nosova O. F. Kuz’menkova N. V. Veretennikov L. G. Petrova L. K. Levsky 《Petrology》2008,16(2):105-135
The reasons for the isotopic and geochemical heterogeneity of magmatism of the Neoproterozoic large Volhynia-Brest igneous province (VBP) are considered. The province was formed at 550 Ma in response to the break up of the Rodinia supercontinent and extends along the western margin of the East European craton, being discordant to the Paleoproterozoic mobile zone that separates Sarmatia and Fennoscandia and the Mesoproterozoic Volhynia-Orsha aulacogen. The basalts of VBP show prominent spatiotemporal geochemical zoning. Based on petrographic, mineralogical, geochemical, and isotopic data, the following types of basalts can be distinguished: olivine-normative subalkaline basalts consisting of low-Ti (sLT, < 1.10–2.0 wt % TiO2; εNd(550) from ?6.6 to ?2.7) and medium-Ti (sMT, 2.0–3.0 wt % TiO2, occasionally up to 3.6 wt % TiO2; εNd(550) from ?3.55 to + 0.6) varieties; normal quartz-normative basalts (tholeiites) including low-Ti (tLT, < 1.75–2.0 wt % TiO2) and medium-to-high-Ti (tHT1, 2.0–3.6 wt % TiO2, εNd(550) from ?1.3 to + 1.0) varieties. The hypabyssal bodies are made up of subalkaline low-Ti olivine dolerites (LT, 1.2–1.5 wt % TiO2; εNd(550) = ?5.8) and subalkaline high-Ti olivine gabbrodolerites (HT2, 3.0–4.5 wt % TiO2; εNd(550) = ?2.5). Felsic rocks of VBP are classed as volcanic rocks of normal (andesidacites, dacites, and rhyodacites) and subalkaline (trachyrhyodacites) series with TiO2 0.72–0.77 wt% and εNd(550) of ?12. The central part of VBP is underlain by a Paleoproterozoic domain formed by continent-arc accretion and contains widespread sills of HT2 dolerites and lavas of LT basalts; the northern part of the province is underlain by the juvenile Paleoproterozoic crust dominated by MT and HT1 basalts. MT and LT basalts underwent significant AFC-style upper crustal contamination. During their long residence in the upper crustal magmatic chambers, the basaltic melts fractionated and caused notable heating of the wall rocks and, correspondingly, nonmodal melting of the upper crustal protolith containing high-Rb phase (biotite), thus producing the most felsic rocks of the province. The basalts of VBP were derived from geochemically different sources: probably, the lithosphere and a deep-seated plume (PREMA type). The HT2 dolerites were generated mainly from a lithospheric source: by 3–4% melting of the geochemically enriched garnet lherzolite mantle. LT dolerites were obtained by partial melting of the modally metasomatized mantle containing volatile-bearing phases. The concepts of VBP formation were summarized in the model of three-stage plume-lithosphere interaction. 相似文献
11.
The valuation of a mining project depends upon the accuracy of geological block model. Sampling density, estimation method, and proper block size mainly affect the accuracy of estimated block. This paper aims to answer three questions: (1) which estimation method is more accurate, (2) what is the relation between sampling density and block size, and (3) what the optimum block size is. Conditional Gaussian simulation (CGS) was used to generate a hypothetical deposit, considered as a real block model. A range of different block dimensions were estimated by ordinary kriging, inverse squared distance, and nearest neighbor methods based on tow-simulated drilling grids database. The comparison of estimated and real block grades reveals that increasing the sampling density results the similar outcomes of geostatistics and deterministic interpolation methods. Furthermore, it was deduced that sampling density could not be a viable alternative in choosing appropriate block dimension and the variogram rang a was suggested as an affective parameter in block size selection. Then a geometrical formula was developed to obtain the block size based on the variogram range. The increment in project value that a mine planner can expected from the additional information of the dense drilling grid was also calculated and it was concluded that the block size obtained based on the suggested formula results acceptable information value. Finally, the database of Chador Malu iron ore mine which is located in 180 km northeast of Yazd city in the central part of Iran were used to validate the suggested formula. 相似文献
12.
对某级配粗粒料,采用剔除法、等量替代法、相似级配法和混合法等4种不同缩尺方法,依据规范要求进行缩尺。缩尺后替代级配料的最大颗粒粒径分别为20、40、60 mm。对各替代级配料采用振动台法进行了最大干密度试验,基于试验成果,结合分形理论,提出了一种将最大干密度与级配及细粒含量之间关系归一化的方法,并拟合了最大干密度与试验前级配的分形维数、小于5 mm颗粒的含量及最大粒径之间的关系,据此可推求出原型级配料的最大干密度,探讨了缩尺方法对替代料试验前后粒径分布曲线变化幅度的影响,总结出颗粒破碎分形维数与试验前级配的分形维数、小于5 mm颗粒含量及最大粒径之间的关系式,据此可推求出填筑后原型级配料的颗粒破碎分形维数。 相似文献
13.
中国大陆科学钻探主孔100～2000m岩石弹性波速度：对地震深反射的约束 总被引：15，自引：11，他引：15
在常温常压条件对中国大陆科学钻CCSD主孔岩心的700样品进行了弹性波速度测量，并建立了主孔2000m的波速(Vp和Vs)连续剖面，为检验地球物理模型的合理解释提供了岩石物理学方面的宝贵资料。主孔中新鲜榴辉岩纵波速度(Vp)最大(7.86km／s)，正副片麻岩波速最小，又分别为5.53km／s和5．71km／s，榴辉岩的波速随着退变质作用的增强而明显减小。主孔2000m总平均Vp速度为6．2km／s，它与地球物理探测方法获得的大别-苏鲁造山带上地壳具有6.2-6．3km／s高速层结论是一致的。大部分岩石具有明显地震波各向异性。水饱和度使岩石纵波(Vp)速度和剪切波速度(Vs)分别增加19％和6％，而使Vp的各向异性降低3％～4％。不同岩性界面的反射系数(Rc)是产生地震反射的主要原因。金红石榴辉岩与片麻岩之间具有很高的反射系数(0.24-0．31)。韧性剪切带中糜棱岩化片麻岩和面理化榴辉岩使岩石各向异性和反射强度明显增加。岩石微裂隙与主孔原位波速变化有密切关系。饱水岩石速度(Vp和Vs)可以代表CCSD主孔原位状态的地震波速度。上述成果为本区地震反射体成因提供了重要的岩石物理性质约束。 相似文献
14.
不同温压下岩石弹性波速度、衰减及各向异性与组构的关系 总被引：16，自引：0，他引：16
结合岩石组构分析 ,阐述了岩石弹性波传播速度和衰减以及它们的各向异性与岩石组构之间的关系。在不同温压条件下对具有很强晶格优选方位的岩石样品的研究表明 ,随着围压的增加 ,波速和Q值均增大 ,但是在相互正交的 3个方向上 (垂直或平行于层理面及线理方向 )增大的速度并不相同 ,这与微裂隙的逐渐闭合密切相关。观测到的波速和Q值的各向异性具有不同的形成机理 ,波速各向异性主要与定向分布的微裂隙和主要矿物的晶格优选方位等构造因素有关 ;高围压下Q值各向异性与速度各向异性正好相反 ,可能是由于定向排列的矿物晶体沿不同方向其边界之间接触程度不同造成的。对岩石组构的研究不仅可以揭示岩体的变形机制、变形的动力学过程及其有关的热力学信息 ,还可以对宏观岩石的各种物理性质 ,尤其是力学特性 ,从微观机理上加以解释。文中特别强调了岩石组构分析对研究岩石物理性质的各向异性具有十分重要的意义。 相似文献
15.
洛古河地区含电气石花岗岩为二长花岗岩类,普遍碎裂或糜棱岩化,属高钾钙碱性岩系。SiO2含量介于65.08%～73.18%之间,Na2O+K2O含量范围为5.49%～7.22%,K2ONa2O;Al2O3含量在14.42%～16.64%之间,铝饱和指数(A/CNK)为1.18～1.31,均大于1.1,CIPW标准矿物计算均出现刚玉分子,显示为强过铝质S型花岗岩的特点。稀土总量(∑REE)变化范围为97.4×10-6～250.9×10-6,(La/Yb)N=5.85～21.95,平均12.2;δEu=0.37～0.59,平均为0.47,具有中等到强的负铕异常。微量元素反映其类似弧火山岩,但又有某些差别。地球化学特征反映其岩浆可能来源于盆地基底的砂质岩石部分熔融,形成于同碰撞构造环境,为同碰撞花岗岩。 相似文献
16.
为研究脱湿过程中饱和度改变对土体小应变刚度的影响规律,自主研制了一套非饱和土小应变刚度试验装置。该装置由3部分构成：相对湿度控制系统、变形测试系统和波速测试系统。相对湿度控制系统可分级提供环境室内相对湿度,通过称重模块记录土样质量变化;变形测试系统利用图像采集结合数字图像处理技术获得土样体变;波速测试系统采用压电陶瓷元件制作的波速传感器,可同时测试土样脱湿过程中压缩波及剪切波波速。试验结果表明：该装置能够分级稳定控制相对湿度环境、间接测量土样体积变化及实时测试弹性波波速,进而研究波速表征的小应变刚度随饱和度的变化规律;土样剪切波速及小应变剪切模量随饱和度的降低逐渐增加,压缩波速及小应变体积模量随饱和度的降低先减小后增加。该装置结构简单,便于操作,为研究非饱和土小应变刚度特性提供了科学有效的测试方法与试验手段。 相似文献
17.
S. Dey-Barsukov H. Dürrast W. Rabbel S. Siegesmund S. Wende 《International Journal of Earth Sciences》2000,88(4):829-839
By vertical seismic profiling and shear wave analysis we show that a packet of carbonate reservoir rocks, found at nearly
3000 m depth in the North German Basin, is seismically anisotropic. For vertical paths of wave propagation the estimated velocity
difference of the split shear waves is 10%. No shear wave birefrigence is observed within the hangingwall which, therefore,
has to be regarded as isotropic or transversely isotropic. Additional laboratory investigations of the petrography of drilled
carbonate samples and of their seismic velocities show that the anisotropy is most probably caused by subvertical fractures
with preferred azimuthal orientation. The strike direction of the aligned fractures determined by analysis of split shear
waves is approximately N55°E. This value agrees with recently published directions of maximum horizontal tectonic stress in
pre-Zechstein sediments in the eastern part of the North German Basin, but it is in contrast to the world stress map.
Received: 20 April 1999 / Accepted: 25 August 1999 相似文献
18.
19.
Summary A method of measuring ultrasonic wave properties in rocks during the complete stress-strain process is described. The relevant experimental laboratory study, to reveal the change of the amplitude spectrum parameters with strain (or stress) has been carried out. A preliminary study was conducted on the application of the ultrasonic measurement technique at a belt conveyor roadway of the north wing in Baodian coal mine, Shandong province. A borehole ultrasonic device with dry coupling was developed to provide better coupling and more accurate measurement data in comparison with those of a water coupled situation. Based on the interrelations between the complete stress-strain properties of specimens and their wave properties, the structural properties of surrounding rocks, the range of yield zones, and the change of stresses within the rocks surrounding a roadway which was subjected to mining influence of upper longwall face were analysed. Amplitude spectrum parameters were used to give a better prediction of the physico-mechanical state of the surrounding rocks. 相似文献
20.
H. R. Rollinson B. F. Windley M. Ramakrishnan 《Contributions to Mineralogy and Petrology》1981,76(4):420-429
The Archaean Karnataka craton of southern India contains Eastern and Western crustal blocks (separated by a major thurst) in which Sargur Schists occur as lenses within tonalitic Peninsular Gneisses. The Schist complex comprises pelites, quartzitic psammites, carbonates and calc-silicates, iron formations, and basic rocks, and thus provides many mineral assemblages ideal for the calculation of PT conditions. With their gneisses the Sargur rocks are unconformably overlain by the Dharwar greenstone belts, and are generally thought to be older than 3,000 my.In the Western block maximum metamorphic conditions are given by meta-basic rocks as 790±50° C and 13±2 kb, but adjacent meta-sediments give a pressure of 9 kb, suggesting that the differences in P and T recorded in this block mark a polychronic metamorphic geotherm related to the exhumation of the terrain by uplift and erosion. In the eastern block maximum temperatures were in the range 750°-850° C and maximum pressures were 7 kb. The rocks of the two blocks were sampled 100 km apart, and thus there was probably a regional pressure difference between the two blocks caused by differentiated crustal thickening prior to or during metamorphism.The shape of the geotherm from the Western block shows near-isothermal decompression over 20 km. Our data suggest that during Sargur metamorphism maximum crustal thicknesses were in excess of 45 km and that there was a minimum difference of 20 km in crustal thickness between the Eastern and Western blocks. 相似文献