首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
This review article commences with a comprehensive historical review of the evolution and application of various density surfaces in atmospheric and oceanic studies. The background provides a basis for the birth of the neutral density idea. Attention is paid to the development of the neutral density surface concept from the nonlinearity of the equation of state of seawater. The definition and properties of neutral density surface are described in detail as developed from the equations of state of seawater and the buoyancy frequency when the squared buoyancy frequency N2 is zero, a neutral state of stability. In order to apply the neutral density surface to intermediate water-mass analysis, this review also describes in detail its practical oceanographic application. The mapping technique is focused for the first time on applying regularly gridded data in this review. It is reviewed how a backbone and ribs framework was designed to flesh out from a reference cast and first mapped the global neutral surfaces in the world's oceans. Several mapped neutral density surfaces are presented as examples for each world ocean. The water-mass property is analyzed in each ocean at mid-depth. The characteristics of neutral density surfaces are compared with those of potential density surfaces.  相似文献   

2.
1Preface Todescribeoceanicintermediatewatermasses,itis necessarytohaveawell definedstudyframeorsurfacebecauseofthefluctuationnatureofintermediatewa ters.Itiswellunderstoodthatoceanicwater mass mixingdoesnotalignwitheitheraconstantgeopoten tialdepthorapropertysurfacesuchastemperature,salinity,pressureanddensitysurfacesbutfollowsa neutraldensitysurface.Thisisbecauseawaterparcelmovesasmalldistanceisentropicallyandadiabaticallyontheneutraldensitysurfacewithoutdoingworka gainstabuoyantrestoringforc…  相似文献   

3.
The thermohaline structure at 4°S, 156°E was analyzed based on CTD data acquired during the TOGA COARE Intensive Observing Period (IOP) from November, 1992 to February, 1993. The ocean responses during two Madden-Julian Oscillation (MJO) events were preliminarily studied based on meteorological field observation. The main water masses at the observation point were Tropical Surface Water, Southern Subtropical Lower Water and Southern Intermediate Water from surface downward. There was good correlation of sea surface temperature with the wind field, and of the surface salinity with wind speed and rainfalls. Both of the two surface variables were also modulated by upwelling caused by westerly winds at the observation point. The isohaline layer was not always shallower than the isothemal layer in this observation and could be considered as the lower limit of the diurnal variation of the isothernal layers in most cases. The existence of large variations of the maximum salinity core is suggested to be related to the meridional motion in that depth. Contribution No. 2264 from the Institute of Oceanology, Chinese Academy of Sciences. This project was supported by NSFC (No. 49176255).  相似文献   

4.
Sea ice thickness is highly spatially variable and can cause uneven ocean heat and salt flux on subgrid scales in climate models.Previous studies have demonstrated improvements in ocean mixing simulation using parameterization schemes that distribute brine rejection directly in the upper ocean mixed layer.In this study,idealized ocean model experiments were conducted to examine modeled ocean mixing errors as a function of the lead fraction in a climate model grid.When the lead is resolved by the grid,the added salt at the sea surface will sink to the base of the mixed layer and then spread horizontally.When averaged at a climate-model grid size,this vertical distribution of added salt is lead-fraction dependent.When the lead is unresolved,the model errors were systematic leading to greater surface salinity and deeper mixed-layer depth(MLD).An empirical function was developed to revise the added-salt-related parameter n from being fixed to lead-fraction dependent.Application of this new scheme in a climate model showed significant improvement in modeled wintertime salinity and MLD as compared to series of CTD data sets in 1997/1998 and 2006/2007.The results showed the most evident improvement in modeled MLD in the Arctic Basin,similar to that using a fixed n=5,as recommended by the previous Arctic regional model study,in which the parameter n obtained is close to 5 due to the small lead fraction in the Arctic Basin in winter.  相似文献   

5.
国内生产总值(GDP)是衡量地区经济发展水平的重要指标,GDP的空间化可以为灾害风险分析等多学科交叉研究提供基础数据。空间化代用数据的选择是社会经济统计数据空间化的关键,本文以京津冀地区作为研究区,将夜间灯光、全球人口密度(LandScan)和亚洲人口密度(AsiaPop)空间分布信息作为代用数据,将市级GDP统计数据空间展布到栅格单元,以绝对误差、相对误差和均方根误差为指标,利用县级统计数据对展布结果进行误差分析,并对比3种数据对GDP空间模拟的表达效果。结果表明:相对于夜间灯光和LandScan数据,AsiaPop模拟得到的综合误差最小;基于夜间灯光和LandScan的GDP空间展布误差格局比较接近,即存在经济较发达的市辖区GDP值被低估、市郊区县GDP被高估的误差“两极区”倾向,而基于AsiaPop的GDP空间展布误差格局与经济发展水平关系不密切。因此,利用单一代用数据很难合理地反映经济活动的空间分布,综合夜间灯光、人口密度、道路和建筑物等多源空间数据是提高GDP空间展布精度的发展趋势。  相似文献   

6.
????????????GPS????????????GPS????????е?????????????????????????????????????????С?????????????????????????????ζ???????桢???ζ???????桢??????ζ???????????????????о?????????С??????????????С?????????????С?????????и???????????????????????????????е???????????????С?????????????и???????????????????  相似文献   

7.
The effects of surface waves and ship heave-and-roll on CTD data are discussed. The heave-and-roll produces spurious step-like structures in the CTD data. Derivation of a formula for calculating the probe's fall speed is discussed. Several current techniques for CTD sensor lag correction are analyzed and compared. It is shown the lag correction procedure presented here, which is based on the Giles-McDougall technique, can be employed to treat CTD data from regions with slow or fast T-S variations, for instance, in strong seasonal thermocline. False salinity spikes or humps in data corrected with this procedure are significantly reduced. The project is supported by the Natural Science Foundation of China and Chinese Education Committee  相似文献   

8.
机载LiDAR点云是获取高质量数字高程模型(Digital Elevation Model, DEM)的主要数据源,而地表粗糙度作为DEM的主要派生产品,在地学研究中发挥了重要作用,但点云密度和插值方法对DEM及地表粗糙度精度影响程度并没有明确结论。为此,本文利用不同地形条件下的林区机载LiDAR点云为实验对象,将原始点云随机缩减为不同的采样密度,利用5种常用插值方法(克里金(Ordinary Kriging, OK),径向基函数(Radial Basis Function, RBF),不规则三角网(Triangulated Irregular Network, TIN),自然邻域(Natural Neighbor, NN)和反距离加权(Inverse Distance Weighting, IDW))构建各个测区不同采样密度条件下的DEM,并通过空间特征和统计特征两方面对DEM及其地表粗糙度精度分析。结果表明:(1) DEM插值算法的精度随点云密度缩减而降低,且数据量缩减至原始数据量的30%后,不同算法精度区别较为明显,其中,RBF和OK精度最优,IDW精度最低;(2) DEM误差与...  相似文献   

9.
采用求解地壳单层密度变化的一般公式,导出其平面近似公式并给出了相应的数值计算方法。在此基础上,将点位错引起的地表形变和重力变化同时解析延拓至Bjerhammar球面上,得到了点位错引起的地壳单层密度变化的图像。分析表明:①单层密度变化图像与地表形变、重力变化图像相似;②地表形变对单层密度变化的影响比地表重力变化要大;③若点位错引起地表重力变化为10-6~10-7m/s2量级、高程变化为0.1~1m量级,则单层密度变化可达103~104kg/m2量级;④单层密度变化在隆升区为正,沉降区为负  相似文献   

10.
随着机载激光雷达成像技术(LiDAR)的不断发展,激光点云数据处理的相关研究也在不断深入。点云滤波是机载激光雷达点云数据处理的重要环节之一。针对多数经典滤波方法在复杂地形和地物条件下的滤波效果不够理想的现状,提出一种新的基于相对变异系数的地形自适应正则化薄板样条插值点云滤波方法。采用二维区域增长获取初始插值参考点后,基于线特征约束对参考点进行优化,去除部分低可靠性参考点以得到较准确、分布离散均匀的初始插值参考点集合,在此基础上通过正则化薄板样条插值方式来拟合地形点与地物点之间的滤波分类面,完成对机载激光点云的高精度自适应滤波。对比实验结果表明,本文的地形自适应滤波方法在2组实验数据的总体错误率分别达到4.14%和4.17%,在错误率和多地形综合表现等方面具有优势,且滤波运算效率在目前主流的滤波算法中处于较高水平。另外,实验结果验证了地形自适应滤波方法在斜坡、山脊等起伏较多的复杂地形与包含植被和建筑物的混合地形等处的点云滤波结果具有较好的准确性。  相似文献   

11.
????ο?????????????????????????????VRS??????????????????????????????????????????????????????λ???ο????????????????????ο???????????????????????ò????????????ο???????????VRS?????????????????????????????????????????????????ó??????????巽??????????ο????????VRS????????????????繹??????С???????VRS???????????  相似文献   

12.
????????????????????д?????????????ο????????????????????????С??????????????????????????????????y????С????????????????????о???????????????????????????????????棬????????????????????????????в??????????????????????????????????????????й?????????????????????????λ?????????????????????????????????????????????????????????????????д???????????????????????н?????Ч????  相似文献   

13.
城市不透水地表格局通过改变城市下垫面结构,引起地表反照率、比辐射率、地表粗糙度的变化,从而对地表辐射和能量平衡产生直接影响。不透水地表能增强地表显热通量,导致地表波文比升高,因此地表波文比的空间差异可推算城市人工不透水表面的分布。本研究选择北京市为实验区,应用Landsat TM卫星热红外遥感数据,采用PCACA模型及理论定位算法,对城市地表波文比进行反演,进而计算遥感地表波文比空间分布数据与城市不透水表面比例数据之间的相关关系,构建回归方程,实现北京市城区与近郊区人工不透水表面百分比分布的定量估算,最后以高分辨率遥感数据获取的城市人工不透水表面比例数据进行结果验证。结果表明,采用PCACA模型定量反演城市地表波文比数据,利用地表波文比数据与不透水表面比例数据之间的相关关系可实现城市人工不透水表面百分比数据的定量估算;波文比值不仅可在遥感像元水平定性判定不透水像元,还可对混合像元中的不透水比例进行较高精度的定量反演,其相关系数R²值为0.731。此方法有效地揭示了城市不透水下垫面对地表热通量影响的机制以及空间定量关系。  相似文献   

14.
基于福建省福州市鼓楼区街道社区人口统计数据、夜光遥感影像、Landsat8影像,融合核密度与回归方程,绘制30 m栅格空间分辨率的人口密度图并进行空间自相关分析。方法:① 采用核密度方法对69个社区人口计算生成人口密度分布图。建立786个居民小区点的人口密度与夜光遥感的常规QQ分位图,检测出人口密度存在较大的误差区域:五凤街道和洪山镇。② 建立人口密度与夜光遥感、Landsat8线性分解的不可渗透表面影像之间的二元二次回归方程,修正两个区域的人口密度误差。③ 采用高/低聚类分析、热点分析、聚类和异常值分析,得到鼓楼区人口高聚类属性,显示了鼓楼区最大商业圈区域与人口密度最大居民点区域,展示了人口聚类的空间局部差异性格局。结果:① 研究中所采用的人口空间化技术融合了2种空间化方法:核密度与回归方程。生成30 m栅格空间分辨率的人口密度图。② 鼓楼区人口密度均值分为3种类型:11 000、25 000和50 000人/ km2,人口密度分布近似正态分布。③ 当鼓楼区人口密度均值大于33 000人/ km2,不可渗透表面灰度值与人口密度相关性更强。反之,夜光亮度值与人口密度相关性更强。  相似文献   

15.
高密度电阻率法是一种成熟的工程物探方法,广泛应用于地质灾害调查。废弃矿山在不良天气条件下容易产生滑坡地质灾害。对由废弃渣石、杂填土人工堆积形成的滑坡体进行勘察,研究高密度电阻率法在该环境下的勘察效果。通过对视电阻率反演断面图分析,推断滑动面深度、滑床起伏形态等滑坡体地质结构信息,为废弃矿山滑坡灾害治理设计提供依据。钻探验证表明,高密度电阻率法有效的推断出滑坡体滑动面深度、滑床起伏形态信息,可用于废弃矿山滑坡灾害勘察。  相似文献   

16.
本文利用LANDSAT-8数据计算距离加权不透水面聚集密度,以城市聚类算法提取北京市主要城建区范围。并用2005-2014年MODIS 8天合成地表温度产品,以主要城建区面积150%的周边区域作为边缘区,计算城建区与边缘区平均温度差值为热岛强度;分析北京市主要城建区热岛强度年内时序变化;依据地表温度与当月平均热岛强度对热岛强度进行等级划分,统计不同热岛强度等级出现频率,分析其空间分布特征及与不透水面聚集密度的相关性。结果表明:(1)年内1-12月热岛强度随边缘区平均温度变化显示较好的规律性,白天为逆时针分布,夜间为顺时针分布;(2)白天热岛强度等级以2、3级为主,春、夏季中南部为三级热岛强度高发区;夜间呈现由外围向中心的“环状递增”特征,高等级热岛强度出现的频率由外围向中心不断递增;(3)不透水面聚集密度对白天不同等级热岛强度出现频率影响显著,1-4级热岛强度出现频率,随不透水面聚集密度增加而增加,不透水面聚集密度达到50%后的影响趋于减弱。  相似文献   

17.
��ظ�ԭ����Ե�����仯�����о�   总被引:2,自引:0,他引:2  
??????????????????????????????????????????????????1993??2003??????????仯?????? ????????????????????????????????????????????????о????????????????????????????????, ?ó????????????????仯?????????????????????????й????????????????????????????????????????????????????????????????????,???????????о??????????κ?λ??????????仯????????????????????????????????仯???????????????????????????  相似文献   

18.
In this paper, CTD observational data obtained during the 15th Chinese National Antarctic Research Expedition (CHINARE-15) in the Southern Ocean are used to analyse and study water mass distribution in the Prydz Bay and its adjacent seas. The area, depth, and the thermohaline characteristics are identified for the Prydz Bay summer coastal surface water, the Prydz Bay winter water, the Prydz Bay shelf water, and the circumpolar deep water. Based on the above discussion, the northward extention of the Prydz Bay shelf water are found. Then the thermodynamic and the dynamic characteristics are further discussed, dealing with the inversion layer depth of the water temperature, the locations of the minima of the vertical temperature distribution and the temperature vertical gradient in the water column, the baraclinicity, and the effect of Coriolis deflection force.  相似文献   

19.
Empirical Orthogonal Function (EOF) analysis is used in this study to generate main eigenvector fields of historical temperature for the China Seas (here referring to Chinese marine territories) and adjacent waters from 1930 to 2002 (510 143 profiles). A good temperature profile is reconstructed based on several subsurface in situ temperature observations and the thermocline was estimated using the model. The results show that: 1) For the study area, the former four principal components can explain 95% of the overall variance, and the vertical distribution of temperature is most stable using the in situ temperature observations near the surface. 2) The model verifications based on the observed CTD data from the East China Sea (ECS), South China Sea (SCS) and the areas around Taiwan Island show that the reconstructed profiles have high correlation with the observed ones with the confidence level >95%, especially to describe the characteristics of the thermocline well. The average errors between the reconstructed and observed profiles in these three areas are 0.69°C, 0.52°C and 1.18°C respectively. It also shows the model RMS error is less than or close to the climatological error. The statistical model can be used to well estimate the temperature profile vertical structure. 3) Comparing the thermocline characteristics between the reconstructed and observed profiles, the results in the ECS show that the average absolute errors are 1.5m, 1.4 m and 0.17°C/m, and the average relative errors are 24.7%, 8.9% and 22.6% for the upper, lower thermocline boundaries and the gradient, respectively. Although the relative errors are obvious, the absolute error is small. In the SCS, the average absolute errors are 4.1 m, 27.7 m and 0.007°C/m, and the average relative errors are 16.1%, 16.8% and 9.5% for the upper, lower thermocline boundaries and the gradient, respectively. The average relative errors are all <20%. Although the average absolute error of the lower thermocline boundary is considerable, but contrast to the spatial scale of average depth of the lower thermocline boundary (165 m), the average relative error is small (16.8%). Therefore the model can be used to well estimate the thermocline. Supported by the Knowledge Innovation Program of Chinese Academy of Sciences (No.KZCX-3W-222; KZCX2-YW-Q11-02) and National Basic Research Program of China (No.2007CB411802; 2006CB403601)  相似文献   

20.
A framework is proposed to characterize and forecast the displacement trends of slow-moving landslides, defined as the reactivation stage of phenomena in rocks or fine-grained soils, with movements localized along one or several existing shear surfaces. The framework is developed based on a thorough analysis of the scientific literature and with reference to significant reported case studies for which a consistent dataset of continuous displacement measurements is available. Three distinct trends of movement are defined to characterize the kinematic behavior of the active stages of slow-moving landslides in a velocity-time plot: a linear trend-type I, which is appropriate for stationary phenomena; a convex shaped trend-type II, which is associated with rapid increases in pore water pressure due to rainfall, followed by a slow decrease in the groundwater level with time; and a concave shaped trend-type III, which denotes a non-stationary process related to the presence of new boundary conditions such as those associated with the development of a newly formed local slip surface that connects with the main existing slip surface. Within the proposed framework, a model is developed to forecast future displacements for active stages of trend-type II based on displacement measurements at the beginning of the stage. The proposed model is validated by application to two case studies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号