首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 562 毫秒
1.
An active oolitic sand wave was monitored for a period of 37 days in order to address the relationship between the direction and strength of tidal currents and the resultant geometry, and amount and direction of migration of bedforms in carbonate sands. The study area is situated in a tidal channel near Lee Stocking Island (Exumas, Bahamas) containing an estimated 5.5 to 6 × 105 m3 of mobile oolitic sand. Tidal ranges within the inlet are microtidal and the maximum current velocity at the studied site is 0.6 m s?1. At least 300–400 m3 of mostly oolitic sand are formed within, or brought into, the channel area every year. The tidal inlet is subdivided into an ocean-orientated segment, in which sand waves are shaped by both flood and ebb tides, and a platform-orientated segment, where sand waves are mainly shaped by flood tides. The studied sand wave lies on the platformward flood-tide dominated segment in a water depth of 3.5.4.5 m. During the 37 days of observation, the oolitic and bioclastic sand wave migrated 4 m in the direction of the dominant flood current. The increments of migration were directly related to the strength of the tide. During each tidal cycle, bedforms formed depending on the strength of the tidal current, tidal range and their location on the sand wave. During flood tides, a steep lee and a gentle stoss side formed and current ripples and small dunes developed on the crest of the sand wave, while the trough developed only ripples. The average lee slope of the sand wave is 24.2°, and therefore steeper than typical siliciclastic sand waves. During ebb tides, portions of the crest are eroded creating a convex upward ebb stoss side, covered with climbing cuspate and linguoid ripples and composite dunes. The area between the ebb-lee side and the trough is covered with fan systems, sinuous ripples and dunes. The migration of all bedforms deviated to a variable degree from the main current direction, reflecting complex flow patterns in the tidal inlet. Small bedforms displayed the largest deviation, migrating at an angle of up to 90° and more to the dominant current direction during spring tides.  相似文献   

2.
The faunal composition of many of the cool-temperate Holocene biogenic carbonates on the continental shelf around the British Isles reflects the composition of the living fauna of the source area, although the relative proportions of particular faunal components may differ. Radiocarbon dating confirms the presence of material of various ages. Older debris is frequently discoloured and heavily bored. More recent components are unstained and contain fewer borings. Faunas can be grouped into Hard Substrate and Soft Substrate Associations.

A model is proposed for the sedimentological and faunal development of a tidal current-dominated, temperate continental shelf for several stages from low to high sea level for a shelf with (a) abundant sand supply and (b) sparse sand supply. In (a) at the start of transgression the available siliciclastic sand is initially formed into hummocky cross-stratified sands. As sea level rises, tidal currents develop and a suite of bedforms is formed. As sea level continues to rise these migrate shorewards. Sand banks and sand waves have a low faunal density and diversity. Following cessation of sand supply the sediments gradually coarsen with the accumulation of bioclastic debris. In (b), hard substrate faunas dominate throughout. As sea level rises, sand patches with a diverse fauna develop on the outer shelf. Following cessation of the sand supply the sediments become coarser.

Faunal diversity is likely to be greatest on continental shelves with minimal clastic sediment supply. Faunal assemblages from abundant sand shelves can be distinguished by the presence of a much higher proportion of infaunal species.  相似文献   


3.
A distinct suite of sand bedforms has been observed to occur in laboratory flows with limited sand supply. As sand supply to the bed progressively increases one observes sand ribbons, discrete barchans and, eventually, channel spanning dunes; but there are relatively few observations of this sequence from natural river channels. Furthermore, there are few observations of transitions from limited sand supply to abundant supply in the field. Bedforms developed under limited, but increasing, sand supply downstream of the abrupt gravel–sand transition in the Fraser River, British Columbia, are examined using multi‐beam swath‐bathymetry obtained at high flow. This is an ideal location to study supply‐limited bedforms because, due to a break in river slope, sand transitions from washload upstream of the gravel–sand transition to bed material load downstream. Immediately downstream, barchanoid and isolated dunes are observed. Most of the bedform field has gaps in the troughs, consistent with sand moving over a flat immobile or weakly mobile gravel bed. Linear, alongstream bedform fields (trains of transverse dunes formed on locally thick, linear deposits of sand) exhibit characteristics of sand ribbons with superimposed bedforms. Further downstream, channel spanning dunes develop where the bed is composed entirely of sand. Depth scaling of the dunes does not emerge in this data set. Only where the channel has accumulated abundant sand on the bed do the dunes exhibit scaling congruent with previous data compilations. The observations suggest that sediment supply plays an important, but often overlooked, role in bedform scaling in rivers.  相似文献   

4.
For more than a century geologists have wondered why some bedforms are orientated roughly transverse to flow, whereas others are parallel or oblique to flow. This problem of bedform alignment was studied experimentally using subaqueous dunes on a 3–6-m-diameter sand-covered turntable on the floor of a 4-m-wide flume. In each experiment, two flow directions (relative to the bed) were produced by alternating the turntable between two orientations. The turntable was held in each orientation for a short time relative to the reconstitution time of the bedforms; the resulting bedforms were in equilibrium with the time-averaged conditions of the bimodal flows. Dune alignment was studied for five divergence angles (the angle between the two flow directions): 45°, 67–5°, 90°, 112–5° and 135°. The flow depth during all experiments was approximately 30 cm; mean velocity was approximately 50 cm s-1 and mean grain diameter was 0–6 mm. Each experiment continued for 30–75 min, during which time the flume flow was steady and the turntable position changed every 2 min. At the end of each experiment, water was slowly drained from the flume and dune alignment was measured. Transverse dunes (defined relative to the resultant transport direction) were created when the divergence angle was 45° and 67–5°, and longitudinal dunes were created when the divergence angle was 135°. At intermediate divergence angles, dunes with both orientations were produced, but transverse dunes were dominant at 90°, and longitudinal dunes were dominant at 112–5°. One experiment was conducted with a divergence angle of 135° and with unequal amounts of transport in the two flow directions. This was achieved by changing the orientation of the turntable at unequal time intervals, thereby causing the amount of transport to be unequal in the two directions. The dunes formed during this experiment were oblique to the resultant transport direction. These experimental dunes follow the same rule of alignment as wind ripples studied in previous turntable experiments. In both sets of experiments, the bedforms developed with the orientation having the maximum gross bedform-normal transport (the orientation at which the sum of the bedform-normal components of the two transport vectors reaches its maximum value). In other words, the bedforms develop with an orientation that is as transverse as possible to the two flows. In those cases where the two flows diverge by more than 90° and transport equal amounts of sand, bedforms that are as transverse as possible to the two separate flows will be parallel to the resultant of the two flow vectors. Although such bedforms have been defined by previous work as longitudinal bedforms, they are intrinsically the same kind of bedform as transverse bedforms.  相似文献   

5.
On the southeast Australian continental margin, mixed siliciclastic and temperate carbonate sediments are presently forming along the narrow 20–35 km‐wide northern New South Wales shelf over an area of 4960 km2. Here, year‐round, highly energetic waves rework inner and mid‐shelf clastic sediments by northward longshore currents or waning storm flows. The strong East Australian Current flows south, sweeping clastic and outer shelf biogenic sands and gravels. Quaternary siliciclastic inner shelf cores consist of fine to medium, lower shoreface sand and graded storm beds of fine to coarse sand. Physically abraded, disarticulated molluscs such as Donacidae and Glycymeridae form isolated gravel lags. Highstand inner shelf clastics accumulate at 0.53 m/103 y in less than 50 m water depth. Clastic mid‐shelf cores contain well‐sorted, winnowed, medium shoreface sands, with a fine sand component. Fine sand and mud in this area is discharged mainly from New South Wales’ largest river, the Clarence. The seaward jutting of Byron Bay results in weakened East Australia Current flows through the mid‐shelf from Ballina to Yamba allowing the fine sediments to accumulate. Quaternary carbonate outer shelf cores have uniform and graded beds forming from the East Australian Current and are also influenced by less frequent storm energy. Modern clastic‐starved outer shelf hardgrounds are cemented by coralline algae and encrusting bryozoans. Clay‐sized particles are dominantly high‐Mg calcite with minor aragonite and smectite/kaolinite. Carbonate sands are rich in bryozoan fragments and sponge spicules. Distinctive (gravel‐sized) molluscs form isolated shells or shell lag deposits comprising Limopsidae and Pectinidae. The upper slope sediments are the only significant accumulation of surficial mud on the margin (18–36 wt%), filling the interstices of poorly sorted, biogenic gravels. Pectinid molluscs form a basal gravel lag. During highstand the outer shelf accumulates sediment at 0.40 m/103 y, with the upper slope accumulating a lower 0.23 m/103 y since transgression. Transgression produced a diachronous (14–10 ka) wave‐ravinement surface in all cores. Relict marine hardgrounds overlie the wave‐ravinement surface and are cemented by inorganic calcite from the shallow and warm East Australian Current. Transgressive estuarine deposits, oxygen isotope Stage 3–5 barriers or shallow bedrock underlie the wave‐ravinement surface on the inner and mid shelf. Northern New South Wales is an example of a low accommodation, wave‐ and oceanic current‐dominated margin that has produced mixed siliciclastic‐carbonate facies. Shelf ridge features that characterise many storm‐dominated margins are absent.  相似文献   

6.
Bedform climbing in theory and nature   总被引：7，自引：0，他引：7  
Where bedforms migrate during deposition, they move upward (climb) with respect to the generalized sediment surface. Sediment deposited on each lee slope and not eroded during the passage of a following trough is left behind as a cross-stratified bed. Because sediment is thus transferred from bedforms to underlying strata, bedforms must decrease in cross-sectional area or in number, or both, unless sediment lost from bedforms during deposition is replaced with sediment transported from outside the depositional area. Where sediment is transported solely by downcurrent migration of two-dimensional bedforms, the mean thickness of cross-stratified beds is equal to the decrease in bedform cross-sectional area divided by the migration distance over which that size decrease occurs; where bedforms migrate more than one spacing while depositing cross-strata, bed thickness is only a fraction of bedform height. Equations that describe this depositional process explain the downcurrent decrease in size of tidal sand waves in St Andrew Bay, Florida, and the downwind decrease in size of transverse aeolian dunes on the Oregon coast. Using the same concepts, dunes that deposited the Navajo, De Chelly, and Entrada Sandstones are calculated to have had mean heights between several tens and several hundreds of metres.  相似文献   

7.
《Sedimentology》2018,65(6):2202-2222
Sorted bedforms are widely present in sediment‐starved littoral and inner shelf settings; they are indicators for hydrodynamic conditions and a primary contributor for the subsurface structure. This study investigated the morphology and migration of sorted bedforms on the inner shelf of Long Beach Barrier Island, New York, USA , by repeat geophysical and geological surveys in 2001, 2005 and 2013 (following superstorm Sandy) involving swath bathymetry, backscatter, chirp seismic reflection data and grab sampling. Swath data revealed that the western sector, comprising the western 75% of the survey region, is dominated by NNE –SSW ‐oriented, 0·5 to 1·0 km wide sorted bedforms with highly asymmetrical cross‐sections, with steeper slopes and coarser sands on the eastern (stoss) flanks. Many secondary bedforms were also observed (north–south to north‐east/south‐west oriented lineation structures) at the western edges of coarse sand zones. The eastern sector displays an unusual sorted bedform pattern that is dominated by coarse‐grained substrate, with isolated patches of fine‐grained sands oriented north‐east/south‐west which are 0·15 to 1·0 km in length and ca 30 to 200 m in width, similar in scale and orientation to the secondary bedforms in the western sector. Comparison analysis of the swath data sets indicates that the primary transverse sorted bedform morphology within the western sector was largely stable over this time frame, although the swales were deepened following the storms. The coarse/fine sand boundaries did migrate, however, moving ca 1 to 5 m eastward between 2001 and 2005, and ca 5 to 20 m westward between 2005 and 2013; the higher migration rates (up to 2·5 m year−1) in the latter time period may be attributable to large storm forcing (for example, hurricanes Irene and Sandy). Significant north‐westward migration of the secondary bedforms and coarse sand patches in the western sector, as well as fine sand patches in the eastern sector were also observed; these features are far more mobile than the primary sorted bedforms, possibly because they are fine sand drifts that do not erode into the coarse substrate. Seismic reflection data revealed a transgressive ravinement beneath sorted bedforms, merging with the sea floor at the bottom of swales. The authors hypothesize that long‐term topographic migration of transverse sorted bedforms contributes to the formation and evolution of the ravinement.  相似文献   

8.
Open‐framework gravel (OFG) in river deposits is important because of its exceptionally high permeability, resulting from the lack of sediment in the pore spaces between the gravel grains. Fluvial OFG occurs as planar strata and cross strata of varying scale, and is interbedded with sand and sandy gravel. The origin of OFG has been related to: (1) proportion of sand available relative to gravel; (2) separation of sand from gravel during a specific flow stage and sediment transport rate (either high, falling or low); (3) separation of sand from gravel in bedforms superimposed on the backs of larger bedforms; (4) flow separation in the lee of dunes or unit bars. Laboratory flume experiments were undertaken to test and develop these theories for the origin of OFG. Bed sediment size distribution (sandy gravel with a mean diameter of 1·5 mm) was kept constant, but flow depth, flow velocity and aggradation rate were varied. Bedforms produced under these flow conditions were bedload sheets, dunes and unit bars. The fundamental cause of OFG is the sorting of sand from gravel associated with flow separation at the crest of bedforms, and further segregation of grain sizes during avalanching on the steep lee side. Sand in transport near the bed is deposited in the trough of the bedform, whereas bed‐load gravel avalanches down the leeside and overruns the sand in the trough. The effectiveness of this sorting mechanism increases as the height of the bedform increases. Infiltration of sand into the gravel framework is of minor importance in these experiments, and occurs mainly in bedform troughs. The geometry and proportion of OFG in fluvial deposits are influenced by variation in height of bedforms as they migrate, superposition of small bedforms on the backs of larger bedforms, aggradation rate, and changes in sediment supply. If the height of a bedform increases as it migrates downstream, so does the amount of OFG. Changes in the character of OFG on the lee‐side of unit bars depend on grain‐size sorting in the superimposed bedforms (dunes and bedload sheets). Thick deposits of cross‐stratified OFG require high bedforms (dunes, unit bars) and large amounts of aggradation. These conditions might be expected to occur during high falling stages in the deeper parts of river channels adjacent to compound‐bar tails and downstream of confluence scours. Increase in the amount of sand supplied relative to gravel reduces the development of OFG. Such increases in sand supply may be related to falling flow stage and/or upstream erosion of sandy deposits.  相似文献   

9.
Subaqueous sand dunes are common bedforms on continental shelves dominated by tidal and geostrophic currents. However, much less is known about sand dunes in deep‐marine settings that are affected by strong bottom currents. In this study, dune fields were identified on drowned isolated carbonate platforms in the Mozambique Channel (south‐west Indian Ocean). The acquired data include multibeam bathymetry, multi‐channel high‐resolution seismic reflection data, sea floor imagery, a sediment sample and current measurements from a moored current meter and hull‐mounted acoustic Doppler current profiler. The dunes are located at water depths ranging from 200 to 600 m on the slope terraces of a modern atoll (Bassas da India Atoll) and within small depressions formed during tectonic deformation of drowned carbonate platforms (Sakalaves Seamount and Jaguar Bank). Dunes are composed of bioclastic medium size sand, and are large to very large, with wavelengths of 40 to 350 m and heights of 0·9 to 9·0 m. Dune migration seems to be unidirectional in each dune field, suggesting a continuous import and export of bioclastic sand, with little sand being recycled. Oceanic currents are very intense in the Mozambique Channel and may be able to erode submerged carbonates, generating carbonate sand at great depths. A mooring located at 463 m water depth on the Hall Bank (30 km west of the Jaguar Bank) showed vigorous bottom currents, with mean speeds of 14 cm sec?1 and maximum speeds of 57 cm sec?1, compatible with sand dune formation. The intensity of currents is highly variable and is related to tidal processes (high‐frequency variability) and to anticyclonic eddies near the seamounts (low‐frequency variability). This study contributes to a better understanding of the formation of dunes in deep‐marine settings and provides valuable information about carbonate preservation after drowning, and the impact of bottom currents on sediment distribution and sea floor morphology.  相似文献   

10.
The dominant calcareous organisms and sediment characteristics are described for eight different physical settings on the shelf west of Scotland, each having a different depth, substrate and degree of hydrodynamic exposure.

The principal sites of carbonate production are on shallow rocky substrates where barnacles, molluscs, echinoderms and serpulids are the dominant calcareous organisms. In sheltered shallow sandy zones, molluscs, echinoderms and benthic foraminiferans are the active producers, though the sediments are commonly barnacle-rich. Where tidal currents are enhanced between islands and the waves are suppressed, calcareous red algae (Phymatolithon calcareum) and mussel shells build localised banks. In deep, open-shelf water molluscs are the major skeletal contributor to the sediment, though on rocky sea beds bryozoans, serpulids and echinoderms are important.

The major sites of deposition are where persistent hydro- (and aero-) dynamic conditions sweep together grains from active production sites (e.g., sand ribbons or beaches and dunes adjacent to shallow rocky platforms) or in sinks where the physiographic configuration favours the deposition and retention of locally produced sediment or sediment derived from suspension. The well-sorted, cross-bedded, beach and dune sands commonly contain > 75% CaCO3. In sheltered depressions, bioturbated muds accumulate with up to 30% calcite silt, which is probably the breakdown product of barnacles and benthic foraminiferans.  相似文献   


11.
Tidal-shelf sedimentation: an example from the Scottish Dalradian   总被引：2，自引：0，他引：2  
The Jura Quartzite, a formation of probably late Precambrian metasediments over 5 km thick from the Caledonian belt in Southwest Scotland, has been divided into a coarse and three fine facies. The former comprises cross-bedded sands with some laminated sands and silt horizons, interpreted as the deposits of shallow marine tidal dunes and other bedforms together with some beach units. Deposition from suspension of silt and sand formed climbing dunes while largescale erosion produced flat or channelled surfaces. The fine facies comprise laterally persistent, parallel and cross-laminated sand units from millimetres to decimetres thick, interbedded with muds. The coarse and fine facies can be finely interbedded, the former sometimes filling decimetre deep, straight channels, cut in the latter. The fine facies exhibit structures indicative of deposition from decelerating currents and are interpreted as shallow marine storm deposits. The facies are compared with a model developed from published observations on modern shelf areas. Zones of erosion, large and small dunes, flat bedded sand and mud are considered to be the end product of a wide spectrum of tidal and storm conditions. During severe storms the fair weather tidal dunes may be modified or washed out, new dunes may be initiated downcurrent of the normal dune field while storm-sand layers are deposited in the distal zones. Hence, the nature of the preserved sediment blanket reflects the rare severe storm event rather than normal tidal conditions. The Jura Quartzite was deposited in a tidal gulf intimately connected with an ocean basin. The north-northeast directed palaeocurrent modes are probably roughly parallel to the coastline.  相似文献   

12.
Thick sequences of sediment surround the Whitsunday Islands on the middle shelf of the Great Barrier Reef (GBR) Platform. Much of this sediment is siliciclastic material deposited since the sea‐level highstand at around 6·5 ka. This raises a mass balance dilemma because modern terrigenous discharge to the GBR Platform is restricted to the inner shelf. Shallow seismic profiles and sediment samples were collected over 450 km2 around the Whitsunday Islands to quantify the mass of siliciclastic sediment for a dynamic model of the shelf. The sea floor and pre‐Holocene surfaces were mapped using 4584 stations along the seismic profiles and a graphical computer program. The total volume of sediment between these two surfaces is 3·67 ± 0·45 × 109 m3. This volume is composed of buried reefs (0·13 ± 0·01 × 109 m3), medium‐ (0·70 ± 0·30 × 109 m3) and fine‐grained shoals (2·84 ± 0·35 × 109 m3). The volume estimates combined with measurements of carbonate concentration, density and porosity indicate that 1850 ± 380 Mt of Holocene siliciclastic sediment surround the Whitsunday Islands in medium‐ (510 ± 225 Mt) and fine‐grained shoals (1340 ± 155 Mt). The total mass of siliciclastic material is 1·7–2·6 times that stored in Cleveland Bay, a similar sized repository on the inner shelf. A simple numerical model has been constructed to explain this large quantity of Holocene siliciclastic sediment. The model results in the appropriate siliciclastic mass next to the Whitsunday Islands by integrating regional shelf processes over time. Unlike the present day, rivers discharged sediment to the middle shelf during the early Holocene. This material was subsequently focused by northward transport into the vicinity of the islands, a geomorphologically complex region that serves as a sediment trap. Although direct riverine inputs to the middle shelf have stopped during the present sea‐level highstand, previously deposited siliciclastic sediment is continually being winnowed from the middle shelf and redeposited next to the Whitsunday Islands. The transport and distribution of siliciclastic sediment on the GBR Platform is thus influenced significantly by storage around islands on the middle shelf.  相似文献   

13.
Carling  Williams  Gölz  & Kelsey 《Sedimentology》2000,47(1):253-278
  相似文献   

14.

Holocene sediments from southern Spencer Gulf are cool‐water carbonate‐rich gravels and sands, dominated by molluscs and Bryozoa. Five sedimentary fades are recognized: (i) molluscan gravel; (ii) branching coralline‐algal gravel, associated with shallow partially protected environments; (iii) molluscan‐biyozoan sand; (iv) mixed bioclastic sand, representative of the deeper central region of the lower gulf; and (v) bryozoan gravel, an isolated fades developed in a semi‐protected micro‐environment. The southern gulf is characterized by complex oceanographic conditions together with variations in water depth and substrate. The sediments share the characteristics of both the southern shelf and upper Spencer Gulf. Grain‐size distribution and sedimentary facies are controlled by a combination of all the above processes. Past sea level fluctuations are recognized from sea floor strand‐line deposits. The relic component of the palimpsest sediments has eroded from the Pleistocene aeolianite dunes. The sediments, therefore, reflect both the modern marine and past environments.  相似文献   

15.
Subaqueous dunes are formed on the KwaZulu-Natal outer-shelf due to sediment transport by the Agulhas Current (geostrophic current). These dunes occur within two dune fields at depths of ? 35 to ? 70 m. The net sediment transport direction is south, but short-period reversals form northward-migrating bedforms. The dune fields are physically bounded by late Pleistocene beachrock and aeolianite ledges. A bedform hierarchy has been recognized in the dune fields comprising a system of three generations of climbing bedforms. The outer dunefield has given rise to a sand ridge (H=12 m; L=4 km; W=1.1 km; and an 8° lee slope) whereas the inner dune fields have achieved large-scale dune status. Bedload parting zones within the dune fields occur where the sediment transport direction switches from north to south due to reversals in the geostrophic flow; these zones occur at depths of ? 60, ? 47 and ? 45 m. An interpretative stratigraphic model is presented on what such geostrophite deposits would look like in the ancient sedimentary record.  相似文献   

16.
The wide Lacepede Shelf and narrow Bonney Shelf are contiguous parts of the south-eastern passive continental margin of Australia. The shelves are open, generally deeper than 40 m, covered by waters cooler than 18°C and swept by oceanic swells that move sediments to depths of 140 m. The Lacepede Shelf is proximal to the ‘delta’of the River Murray and the Coorong Lagoon. Shelf and upper slope sediments are a variable mixture of Holocene and late Pleistocene quartzose terrigenous clastic and bryozoa-dominated carbonate particles. Bryozoa grow in abundance to depths of 250 m and are conspicuous to depths of 350 m. They can be grouped into four depth-related assemblages. Coralline algae, the only calcareous phototrophs, are important sediment producers to depths of 70 m. Active benthic carbonate sediment production occurs to depths of 350 m, but carbonate sediment accumulation is reduced on the open shelf by continuous high energy conditions. The shelf is separated into five zones. The strandline is typified by accretionary sequences of steep shoreface, beach and dune carbonate/siliciclastic sediments. Similar shoreline facies of relict bivalve/limestone cobble ridges are stranded on the open shelf. The shallow shelf, c.40–70 m deep, is a wide, extremely flat plain with only subtle local relief. It is a mosaic of grainy, quartzose, palimpsest facies which reflect the complex interaction of modern bioclastic sediment production (dominated by bryozoa and molluscs), numerous highstands of sea level over the last 80 000 years, modern mixing of sediments from relatively recent highstands and local introduction of quartz-rich sediments during lowstands. The middle shelf, c.70–140 m deep, is a gentle incline with subtle relief where Holocene carbonates veneer seaward-dipping bedrock clinoforms and local lowstand beach complexes. Carbonates are mostly modern, uniform, clean, coarse grained sands dominated by a diverse suite of robust to delicate bryozoa particles produced primarily in situ but swept into subaqueous dunes. The deep shelf edge, c. 140–250 m deep, is a site of diverse and active bryozoa growth. Resulting accumulations are characteristically muddy and distinguished by large numbers of delicate, branching bryozoa. The upper slope, between 250 and 350 m depth, contains the deepest platform-related sediments, which are very muddy and contain a low diversity suite of delicate, branching cyclostome bryozoa. This study provides fundamental environmental information critical for the interpretation of Cenozoic cool water carbonates and the region is a good model for older mixed carbonate-terrigenous clastic successions which were deposited on unrimmed shelves.  相似文献   

17.
Coarse-gravel bedforms which resulted from Pleistocene glacial outburst floods are identified as subaqueous dunes. Comparison of the morphology of these ‘fossil’ structures with modern dunes shows that the form of two-dimensional (2-D) transverse dunes and 3-D cuspate and lunate dunes developed in coarse gravels is comparable with sand-dune morphology within lesser-scale geophysical flows. The similarity of the steepest gravel dunes with equilibrium dunes in sand indicates that grain size is not a major factor in constraining primary duneform. Internal structure indicates that flow over 2-D dunes was relatively uniform but over 3-D bedforms flow was locally variable. Flow separation and complex streaming of flow occurred over the steepest 3-D dunes. Cross-beds are thin and few approach the angle of repose; consequently most dunes did not migrate primarily by avalanching but by stoss-entrained gravel transported over the crests rolling-down and depositing on the lee slopes. Lee-side sediments are often finer than the stoss-slope sediments, which indicates the lee formed when flood power was waning. Some dunes were slightly planed-down during falling stage because lee-side cross-beds tend to be steeper than the angle of the preserved lee slope. However, silt-rich caps indicate that any height reduction was contemporary with the final deposition of foresets. Post-flood modification has been negligible although the modern topography is subdued by loess deposits within the dune troughs.  相似文献   

18.
Interpreting the physical dynamics of ancient environments requires an understanding of how current‐generated sedimentary structures, such as ripples and dunes, are created. Traditional interpretations of these structures are based on experimental flume studies of unconsolidated quartz sand, in which stepwise increases in flow velocity yield a suite of sedimentary structures analogous to those found in the rock record. Yet cyanobacteria, which were excluded from these studies, are pervasive in wet sandy environments and secrete sufficient extracellular polysaccharides to inhibit grain movement and markedly change the conditions under which sedimentary structures form. Here, the results of flume experiments using cyanobacteria‐inoculated quartz sand are reported which demonstrate that microbes strongly influence the behaviour of unconsolidated sand. In medium sand, thin (ca 0·1 to 0·5 mm thick) microbial communities growing at the sediment–water interface can nearly double the flow velocity required to produce the traditional sequence of ripple→dune→plane‐bed lamination bedforms. In some cases, these thin film‐like microbial communities can inhibit the growth of ripples or dunes entirely, and instead bed shear stresses result in flip‐over and rip‐up structures. Thicker (ca≥1 mm thick) microbial mats mediate terracing of erosional edges; they also, foster transport of multi‐grain aggregates and yield a bedform progression consisting of flip‐overs→roll‐ups→rip‐ups of bound sand.  相似文献   

19.
Joseph Bonaparte Gulf is a large embayment on the northwestern continental margin of Australia. It is approximately 300 km east‐west and 120 km north‐south with a broad continental shelf to seaward. Maximum width from the southernmost shore of Joseph Bonaparte Gulf to the edge of the continental shelf is 560 km. Several large rivers enter the gulf along its shores. The climate is monsoonal, sub‐humid, and cyclone‐prone during the December‐March wet season. A bedrock high (Sahul Rise) rims the shelf margin. The sediments within the gulf are carbonates to seaward, grading into clastics inshore. A seaward‐thinning wedge of highstand muds dominates the sediments of the inner shelf of Joseph Bonaparte Gulf. Mud banks up to 15m thick have developed inshore. Coarse‐grained sand ridges up to 15 m high are found off the mouth of the Ord River. These overlie an Upper Pleistocene transgressive lag of mixed carbonate and gravelly siliciclastic sand. Four drowned strandlines are present on the inner shelf at depths of 20, 25, 28 and 30 m below datum. These are interpreted as having formed during stillstands in the Late Pleistocene transgression. Older strandlines at great depths are inferred as having formed during the fall in sea‐level following the last highstand. For the most part the Upper Pleistocene‐Holocene marine sediments overlie an erosion surface cut into older Pleistocene sediments. Incised valleys cut into this erosion surface are up to 5 km wide and have a relief of at least 20 m. The largest valley is that cut by the Ord River. Upper Pleistocene sediments deposited in the incised valleys include interpreted lowstand fluvial gravels, early transgressive channel sands and floodplain silts, and late transgressive estuarine sands and gravels. Older Pleistocene sediments are inferred to have been deposited before and during the 120 ka highstand (isotope stage 5). They consist of sandy calcarenites deposited in high‐energy tide‐dominated shelf environments. Still older shelf and valley‐fill sediments underlie these. The contrast between the Holocene muddy clastic sediments and the sandy carbonates deposited by the 120 ka highstand suggests that either the climate was more arid in the past, with less fluvial transport, or that mud was more effectively trapped in estuaries, allowing development of carbonate depositional environments inshore.  相似文献   

20.
The Pliocene–Pleistocene peripheral marine basins of the Mediterranean Sea in southern Italy, from Basilicata and western Calabria to northern and eastern Sicily, represent tectonically formed coastal embayments and narrow straits. Here, units of cross‐stratified, mixed silici–bioclastic sand, 25 to 80 m thick, record strong tidal currents. The Central Mediterranean Sea has had a microtidal range of ca 35 cm, and the local amplification of the tidal wave is attributed to tides enhanced in some of the bays and to the out‐of‐phase reversal of the tidal prism in narrow straits linking the Tyrrhenian and Ionian basins. The siliciclastic sediment was generated by local bedrock erosion, whereas the bioclastic sediment was derived from the contemporaneous, foramol‐type cool‐water carbonate factories. The cross‐strata sets represent small to medium‐sized (10 to 60 cm thick) two‐dimensional dunes with mainly unidirectional foreset dip directions. These tidalites differ from the classical tidal rhythmites deposited in mud‐bearing siliciclastic environments. Firstly, the foreset strata lack mud drapes and, instead, show segregation of siliciclastic and bioclastic sand into alternating strata. Secondly, the thickness variation of the successive silici–bioclastic strata couplets, measured over accretion intervals of 2 to 3 m and analysed statistically, reveal only the shortest‐term, diurnal and semi‐diurnal tidal cycles. Thirdly, the record of diurnal and semi‐diurnal tidal cycles is included within the pattern of neap‐spring cycles. Differences between these sediments and classical tidal rhythmites are attributed to the specific palaeogeographic setting of a microtidal sea, with the tidal currents locally enhanced in peripheral basins. It is suggested that this particular facies of mud‐free, silici–bioclastic arenite rhythmites in the stratigraphic record might indicate a specific type of depositional sub‐tidal environment of straits and embayments and the shortest‐term tidal cycles.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号