首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 923 毫秒
1.
Dredged or excavated soft marine clay can be improved by mixing it with cement or lime. However, these treatments are usually expensive. It is shown in this paper that soft marine clay can be strengthened through a bioencapsulation method in which the shear strength of clay aggregates can be substantially increased after the aggregates are treated with urease-producing bacteria, calcium chloride, and urea. We found that the bioencapsulation had increased the unconfined compressive strength of marine clay aggregates with a size of 5 mm from almost zero to more than 2 MPa. The strength of the bioencapsulated clay aggregates decreases with the increase in the size of the aggregate when the size is greater than 5 mm.  相似文献   

2.
Abstract

Evaluation of the strength of cement-treated clay with a broad range of mix ratios and curing periods was conducted using unconfined compression tests (UCTs). The influence of cement content, total water content, and curing period on the unconfined compressive strength of cemented clay are investigated. It is found that, at constant total water content, higher cement content results in higher unconfined compressive strength, while the total water content has an opposite effect. A power function can be used to correlate the unconfined compressive strength with the cement content or the total water content. For a fixed mix ratio, the unconfined compressive strength of cement-stabilized clay increases with the curing period, the effect of which can be characterized by a semi-log formula. Also, a strength-prediction model that considers both mix ratios and curing periods for cement-admixed marine clay is developed and validated; the model can capture the effect of clay type by considering the plastic index of untreated soils. It is also proved that the proposed framework for strength development is also applicable for other cement types.  相似文献   

3.
Unconfined and triaxial compression tests were carried out to examine the behavior of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged soils, and cement with respect to initial water content. The stress-strain behavior of LWS are analyzed with varying initial water content and silt contents of dredged soils, cement ratio, and confined stress. As initial water contents increase, the compressibility index increases and the preconsolidation pressure was vice versa. As initial water contents increase, the slope of stress-strain curve in elastic zone increases and strain rate at failure decreases and the strain rate at failure was not changed by the being of foams. As initial water contents increase, a compressive strength of LWS decreases. The decrement ratio of compressive strength of LWS with foams increases as cement content increases and initial water contents decreases. The compressive strength increases as silt contents increases.  相似文献   

4.
This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3–4% and initial water content of 165–175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.  相似文献   

5.
ABSTRACT

A series of tests in both laboratory and field were performed to investigate the engineering and mechanical properties, especially flexural strength, of cement-stabilized soils. The strength of cement-stabilized soils mainly depends on water-to-cement ratio and curing temperature. The higher curing temperature and the longer curing time, the higher strength in cement-stabilized soils generates. The high ratio of water-to-cement results in lower strength. The compressive strength observed in the field is similar to the strength in the laboratory. Field tests on a cement-stabilized soil layer indicate that the strength is significantly affected by the thickness of the improved layer, which is directly related to the moment of inertia. In addition, the failure shape observed in a cement-stabilized layer in the field looks likes a bending failure type, because the flexural tensile strength, rather than the compressive strength, mainly dominates the failure of cement-stabilized layer. The flexural tensile strength is closely related to the moment of inertia. Therefore, the flexural tensile strength should be considered for determining the thickness and strength in improvement of soft clay.  相似文献   

6.
A series of tests in both laboratory and field were performed to investigate the engineering and mechanical properties, especially flexural strength, of cement-stabilized soils. The strength of cement-stabilized soils mainly depends on water-to-cement ratio and curing temperature. The higher curing temperature and the longer curing time, the higher strength in cement-stabilized soils generates. The high ratio of water-to-cement results in lower strength. The compressive strength observed in the field is similar to the strength in the laboratory. Field tests on a cement-stabilized soil layer indicate that the strength is significantly affected by the thickness of the improved layer, which is directly related to the moment of inertia. In addition, the failure shape observed in a cement-stabilized layer in the field looks likes a bending failure type, because the flexural tensile strength, rather than the compressive strength, mainly dominates the failure of cement-stabilized layer. The flexural tensile strength is closely related to the moment of inertia. Therefore, the flexural tensile strength should be considered for determining the thickness and strength in improvement of soft clay.  相似文献   

7.
Abstract

River-dredged sludge has a high water content and minimal bearing capacity and strength. Adding cement, fly ash, and slag to dredged sludge as a combined curing agent can quickly reduce its water content and improve its strength. This study experimentally investigates the solidification effectiveness of different proportions of curing agents using methods including electron microscopy, particle size analysis, water ratio limit, and water content and direct shear tests. The water content and shear strength of different combined curing agents are obtained at different ages. We find that an optimum curing agent combination exists. With increases in fly ash and slag content, test results indicate that the water content of solidified sludge first decreases and then increases, whereas the shear strength first increases and then decreases, allowing an optimal combination curing agent to be obtained. When using industrial waste residue as curing agent, it is necessary to consider the negative effects of the curing agent to better control the dosage so as to achieve better curing effect.  相似文献   

8.
This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3-4% and initial water content of 165-175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.  相似文献   

9.
ABSTRACT

Strength and stiffness properties of materials are widely studied and used in civil engineering practice. However, most studies are based on unconfined conditions, which are different from real status of soil. This study investigated the primary yielding and yield locus for cement-stabilized marine clay. In this study, two types of cement-stabilized soils were studied through isotropic compression, triaxial drained shearing, unconfined compression, and bender element testing. Specimens with 20–50% of cement content and 7–90 days of curing period were used for the tests. Stress–strain behavior and primary yielding were evaluated, followed by construction of the primary yield locus. The characteristics of the primary yield locus and its development with curing time then were studied. The results showed that the properties of the primary yield locus were dependent on the type of stabilized soil, but were independent of the cement content and curing period. Thus, the approach provides a way to estimate the primary yield stress and drained stress path before primary yielding for cement-stabilized soil under confined condition. An empirical function was used to fit the primary yield locus. The primary isotropic yield stress was correlated to unconfined compressive strength or maximum shear modulus. Three indirect methods were proposed to predict the primary yield stress for cement-stabilized marine clay. The results showed that the primary yield stress can be estimated with reasonable accuracy.  相似文献   

10.
Soft clay with high sodium chloride salt concentration is a problem encountered by geotechnical and highway engineers. Chemical stabilization using cement is an attractive method to improve the engineering properties of soft soil. However, very limited studies have been conducted to reveal the effect of salt concentration on the engineering properties of cement-stabilized soil and the reported results in literature are not consistent. The impact of sodium chloride salt on the strength and stiffness properties of cement-stabilized Lianyungang marine clay is studied in this study. The clay with various sodium chloride salt concentrations was prepared artificially and stabilized by various contents of Ordinary Portland cement. A series of unconfined compressive strength (UCS) tests of cement stabilized clay specimen after 7, 14, and 28 days curing periods were carried out. The results indicate that a high sodium chloride salt concentration has a detrimental effect on the UCS and stiffness of cement-stabilized clay. The detrimental effect of salt concentration on the strength and stiffness of cement-stabilized clay directly relates to cement content. Soils mixed with high cement content are more resistant to the negative effect of salts than soils mixed with low cement content. The ratio of modulus of elasticity to UCS of cement treated soil does not have an obvious relationship with salt concentration. The findings of this study present a rational basis for the understanding of the impact of salt on the engineering properties of cement-treated soil.  相似文献   

11.
Two aspects of deep mixing method, the difference relating strength gain in dry jet mixing (DJM, reagent powder introduced into the ground) and cement deep mixing (CDM, reagent slurry introduced into the ground), and prediction of unconfined compressive strength of cement stabilized marine clay, are discussed in this paper. The first part of this paper concentrates on the difference between DJM and CDM on strength gain, and suggests a guideline for DJM and CDM selection. An indicator in terms of water content ratio, which is defined as the ratio of water content to the liquid limit of the soil, is presented by statistical analysis from the laboratory and field test data as a guideline for the selection of DJM or CDM. Based on the laboratory test data, a mathematical model relating strength gain of cement stabilized marine clay to related variables is developed. A new simple index designated as total water-cement ratio, which is defined as the ratio of water weight in the soil-cement to the weight of cement in dry state, is proposed for interpretation of test data of soil-cement. The proposed method is then verified with available test data published by other different researchers.  相似文献   

12.
Two aspects of deep mixing method, the difference relating strength gain in dry jet mixing (DJM, reagent powder introduced into the ground) and cement deep mixing (CDM, reagent slurry introduced into the ground), and prediction of unconfined compressive strength of cement stabilized marine clay, are discussed in this paper. The first part of this paper concentrates on the difference between DJM and CDM on strength gain, and suggests a guideline for DJM and CDM selection. An indicator in terms of water content ratio, which is defined as the ratio of water content to the liquid limit of the soil, is presented by statistical analysis from the laboratory and field test data as a guideline for the selection of DJM or CDM. Based on the laboratory test data, a mathematical model relating strength gain of cement stabilized marine clay to related variables is developed. A new simple index designated as total water-cement ratio, which is defined as the ratio of water weight in the soil-cement to the weight of cement in dry state, is proposed for interpretation of test data of soil-cement. The proposed method is then verified with available test data published by other different researchers.  相似文献   

13.
This article studies the strength properties of compacted sand-bentonite landfill barrier material with and without cement addition at different periods of aging. Test results indicated that strength values, both in compression and tension, increased up to threefold in cement added samples, as well as enhancing the ductile behavior. Cubic modulus, described as the slope of the elastic portion of the cubic compressive stress versus strain curves, is determined along with initial and flexural moduli, and all the strength and moduli values were correlated with each other. Finally, it is concluded that there is a marked improvement in strength properties and moduli with cement inclusion and that the effect of aging has been very effective.  相似文献   

14.
The purpose of this article is to investigate a possible use of lime for the stabilization of base soils underlying salt evaporation ponds in Çamalt? Solar Marine Salt Plant. The plant is located on the old Gediz River Delta, on the north shore of the Izmir Bay-Turkey, where alluvial deltaic soft marine sediments constitute the local soil condition. The low bearing capacity of the pond base soils results in some problems on the mechanical harvest of the solar salt. Therefore, stabilization was taken into consideration for improving the productivity of the salt plant. For this purpose, bench-scale laboratory tests were performed on the specimens that had been sampled from the bases of the salt evaporation pond to investigate the influence of lime on the unconfined compressive strength (UCS) of these marine sediments. By interpreting the pH test results and consistency limits of the lime stabilized soils, optimum lime content was determined as 8%. The verification of the long-term pozzolanic reactions for the optimum lime content was conducted by performing UCS tests with up to six months curing periods, along with the microstructural analysis through X-ray diffraction analysis (XRD) and a scanning electron microscope (SEM). Long-term tests revealed that the optimum lime content successfully sustained the required pozzolanic reactions, and a strength gain of 500% was achieved for a six-month curing period.  相似文献   

15.
Based on the geotechnical investigation data of artificial island at Dalian Offshore Airport, the spatial distribution of the physical and mechanical properties of deposit soils was statistically analyzed. The field investigation revealed that the deposit soils could be subdivided into three strata, i.e., the top marine deposit stratum, middle marine-continental deposit stratum, and deep continental deposit stratum. Field and laboratory test results demonstrated that the marine deposit soils had high water content (31.2% < wn < 63.10%), large void ratio (0.88 < e0 < 1.75), low permeability (kv < 10?6 cm/s), flow-plastic state (IL > 1), under consolidated (OCR < 1), high compressibility (Es < 4 MPa), low shear strength (11.7 kPa < cu < 43.7 kPa), and low bearing capacity (0 < fak < 120 kPa), they could not be used as natural foundation. The marine-continental and continental deposits were normally consolidated to over-consolidated (OCR ≥ 1), medium compressibility (4 MPa < Es < 20 MPa), high shear strength (29.7 kPa < cu < 73.7 kPa), and high bearing capacity (fak > 120 kPa). In addition, regression analysis results showed that the compression ratio was positively correlated with the natural water content, the coefficient of vertical consolidation was negatively correlated with the plasticity index, and the coefficient of vertical permeability was positively correlated with the initial void ratio. The results of the field and laboratory tests were synthesized to provide a basis for reclamation design.  相似文献   

16.
This article presents a laboratory study of static behavior of silty-sand soils. The objective of this laboratory investigation is to study the effect of initial confining pressures and fines content on the undrained shear strength (known as liquefaction resistance) response, pore pressure, and hydraulic conductivity of sand–silt mixtures. The triaxial tests were conducted on reconstituted saturated silty-sand samples at initial relative density Dr = 15% with fines content ranging from 0 to 50%. All the samples were subjected to a range of initial confining pressures (50, 100, and 200 kPa). The obtained results indicate that the presence of low plastic fines in sand–silt mixture leads to a more compressible soil fabric, and consequently to a significant loss in the soil resistance to liquefaction. The evaluation of the data indicates that the undrained shear strength can be correlated to fines content (Fc), inter-granular void ratio (eg), and excess of pore pressure (Δu). The undrained shear strength decreases with the decrease of saturated hydraulic conductivity and the increase of fines content for all confining pressures under consideration. There is a relatively high degree of correlation between the peak shear strength (qpeak) and the logarithm of the saturated hydraulic conductivity (ksat) for all confining pressures.  相似文献   

17.
Cement and lime are widely employed in soil and sediment treatment for an improvement of geotechnical properties, such as an increase in mechanical strength which enables beneficial use in various geotechnical applications. In this study, fine organic-rich dredged harbour sediments of 120% relative water content were treated with dry cement at contents varying between 2% and 10% of bulk sediment wet weight. Tests based on assessments of one-dimensional compression and Atterberg limits were performed on untreated and cement-treated sediments for various curing periods, as well as grain-size, SEM and X-ray diffraction analyses. The results confirm that increasing the cement content improves the geotechnical properties of these harbour sediments. Already in the early phase of curing (first 3 days of curing), particle size increases while sediment plasticity decreases. Changes in the compressibility behaviour include an increase in apparent preconsolidation pressure, in the compression index C c and in the primary consolidation coefficient C v, and a decrease in the secondary compression index . This means that the new materials are characterized by a behaviour intermediate between that of fine and that of coarser soils.  相似文献   

18.
Abstract

The mechanical characteristics of calcareous silt interlayers play an important role in the stability of island-reef foundations. Direct shear and consolidation tests were performed to study the relationship between the mechanical properties and the physical parameters of calcareous silt. Based on the consolidation test results and analysis of the settling examples, different calculation methods for soil settling were compared. The results show the following. (1) The relationship between the cohesion and water content of calcareous silt can be represented by an M-shaped curve. The water contents corresponding to the two peaks of the M-type curve increase with increasing dry density. (2) When the dry density is less than 1.33?g/cm3, increasing the density significantly improves the internal friction angle of calcareous silts. When the dry density of the calcareous silt is greater than 1.33?g/cm3, the internal friction angle is affected by both the dry density and the water content. (3) The shear strength decreases when the water content exceeds the optimum level. (4) The compressive modulus of calcareous silt is larger than that of terrigenous silt. Specifically, it decreases with decreasing dry density and increasing water content. (5) The stepwise loading method should be used to estimate the soil settling before fill engineering construction.  相似文献   

19.
In the present research, effect of silica fume as an additive and oil polluted sands as aggregates on compressive strength of concrete were investigated experimentally. The amount of oil in the designed mixtures was assumed to be constant and equal to 2% of the sand weight. Silica fume accounting for 10%, 15% and 20% of the weight is added to the designed mixture. After preparation and curing, concrete specimens were placed into the three different conditions: fresh, brackish and saltwater environments (submerged in fresh water, alternation of exposed in air & submerged in sea water and submerged in sea water). The result of compressive strength tests shows that the compressive strength of the specimens consisting of silica fume increases significantly in comparison with the control specimens in all three environments. The compressive strength of the concrete with 15% silica fume content was about 30% to 50% higher than that of control specimens in all tested environments under the condition of using polluted aggregates in the designed mixture.  相似文献   

20.
The shear strength properties of sediments are relevant to many practical problems, including those related to predicting the bearing capacity of the man-made crust lying over dredged disposal sites and those associated with estimating the erosion resistance and the bearing capacity of sediments. In this study, an experimental apparatus and method is developed for sedimentation. This apparatus consists of a settling column, pore measurement apparatus, shear vane apparatus, and multilayer extraction sampling apparatus. The change regulation of interface height, density, excess pore pressure, peak undrained shear strength, residual undrained shear strength, and sensitivity varies before and after the excess pore pressure dissipates to zero in the self-weight consolidation stage. The higher the water content, the greater the particle segregation degree. Particles are mainly segregated in the settling stage, and they are not segregated further in the self-weight consolidation stage. Before excess pore pressure dissipates to zero in the self-weight consolidation stage, shear strength is related to water content, effective stress, and the formed structure of sediments. After excess pore pressure dissipates to zero, peak undrained shear strength is mainly associated with the structure (thixotropy) of sediments. Residual undrained shear strength increases because of the slight decrease in water content. The mechanisms of thixotropy can be expressed as the increase in the original and curing cohesions of sediments with time as determined from microscopic aspects.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号