首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
The study on the earthquake-resistant performance of a pile-soil-structure interaction system is a relatively complicated and primarily important issue in civil engineering practice. In this paper, a computational model and computation procedures for pile-supported structures, which can duly consider the pile-soil interaction effect, are established by the finite element method. Numerical implementation is made in the time domain. A simplified approximation for the seismic response analysis of pile-soil-structure systems is briefly presented. Then a comparative study is performed for an engineering example with numerical results computed respectively by the finite element method and the simplified method. Through comparative analysis, it is shown that the results obtained by the simplified method well agree with those achieved by the finite element method. The numerical results and findings will offer instructive guidelines for earthquake-resistant analysis and design of pile-supported structures.  相似文献   

2.
为研究能源群桩工作特性,基于Abaqus有限元模拟,将换热稳定阶段的平均温度赋予桩体进行稳态热-力耦合计算,提出了能源群桩承载特性的简化分析方法,并通过与现场数据的对比分析,验证了该研究方法的可行性。结合算例,进一步利用该方法对纯力学荷载和热-力耦合作用下的能源群桩的承载特性进行了分析。结果表明:①群桩基础中能源桩分散对称分布的不均匀沉降要明显小于集中分布,而且分布形式对桩基结构响应特征影响较大;②桩基等刚度下,增大桩径和减小桩间距,群桩倾斜控制效果较好。研究成果可以为能源群桩的工程应用提供一定的参考。   相似文献   

3.
The distribution of saturated soft clay is greatly wide in China. The current main measures adopted to deal with soft soil foundations may lead to environmental pollution, even some engineering accidents may happen on soft soil foundations. In order to solve engineering problems of saturated soft soil foundations well, researches of mechanical properties of them are necessary. One of the most important mechanical characteristics of saturated soft clay is its cyclic accumulative deformation under cyclic loadings. For saturated soft clay, the cyclic accumulative deformation is similar to the creep behavior under static loadings. Therefore, the cyclic accumulative deformation is equivalent to the creep, the number of loading cycles is seen as the time, and this study develops a practical method for predicting the cyclic accumulative deformation of saturated soft clay with the creep theory. The method is a pseudostatic elasto-plastic finite element method implemented by ABAQUS software. A fitted equation between cyclic accumulative strain and number of loading cycles and the empirical relationship of parameters of fitted equation were established with a series of cyclic triaxial compression tests. Then with this empirical relationship of parameters, the method developed by this study was employed to predict the cyclic accumulative deformation under cyclic triaxial tension tests. Predicted results were in good agreement with test results, and the effectiveness of this method was thus validated for different stress states. The method was then applied in analyzing the cyclic accumulative deformation for soft soil foundation of a pile-supported wharf structure.  相似文献   

4.
After Wenchuan earthquake,Code for verification of Seismic Protection of Building is revised and the seismic verification for the buildings of primary and secondary schools is upgraded from Class C to Class B.With this background,nearly one hundred buildings of primary and secondary schools in Jilin Province have been reevaluated by the earthquake-resistant standards and a set of simplified earthquake-resistant evaluation methods based on relevant technical standards and regulations were summarized and presented here.These methods can serve as an important reference for future earthquake-resistant evaluation for primary and secondary school buildings as well as a convenient guide for the relevant construction and modification works.  相似文献   

5.
A finite difference model for solving Navier Stokes equations with turbulence taken into account is used to investigate viscous liquid sloshing-wave interaction with baffles in a tank. The volume-of-fluid and virtual boundary force methods are employed to simulate free surface flow interaction with structures. A liquid sloshing experimental apparatus was established to evaluate the accuracy of the proposed model, as well as to study nonlinear sloshing in a prismatic tank with the baffles. Damping effects of sloshing in a rectangular tank with bottom-mounted vertical baffles and vertical baffles touching the free surface are studied numerically and experimentally. Good agreement is obtained between the present numerical results and experimental data. The numerical results match well with the current experimental data for strong nonlinear sloshing with large free surface slopes. The reduction in sloshing-wave elevation and impact pressure induced by the bottom-mounted vertical baffle and the vertical baffle touching the free surface is estimated by varying the external excitation frequency and the location and height of the vertical baffle under horizontal excitation.  相似文献   

6.
The foundations of some ocean engineering structures are built to withstand not only the vertical gravity load V, but also the horizontal load H induced by sea waves and current. The horizontal load includes the concentrated force load, the moment load M, and the torque load T termed also as combined loading. It is of academic and engineering significance to study the deformation law of submarine seabed due to combined loading. On the basis of the three-dimensional elastic mechanics solution of circular foundation, numerical methods are used to analyze the deformation law of submarine soil under circular foundation with six degrees of freedom. The finite element analysis results give the elastic deformation law of soil in three dimensional spaces, modify the theoretical elasticity solution, and presents nonlinear soil deformation mechanism under the circular foundation with six degrees of freedom.  相似文献   

7.
Robust numerical models that describe the complex behaviors of risers are needed because these constitute dynamically sensitive systems. This paper presents a simple and efficient algorithm for the nonlinear static and dynamic analyses of marine risers. The proposed approach uses the vector form intrinsic finite element (VFIFE) method, which is based on vector mechanics theory and numerical calculation. In this method, the risers are described by a set of particles directly governed by Newton’s second law and are connected by weightless elements that can only resist internal forces. The method does not require the integration of the stiffness matrix, nor does it need iterations to solve the governing equations. Due to these advantages, the method can easily increase or decrease the element and change the boundary conditions, thus representing an innovative concept of solving nonlinear behaviors, such as large deformation and large displacement. To prove the feasibility of the VFIFE method in the analysis of the risers, rigid and flexible risers belonging to two different categories of marine risers, which usually have differences in modeling and solving methods, are employed in the present study. In the analysis, the plane beam element is adopted in the simulation of interaction forces between the particles and the axial force, shear force, and bending moment are also considered. The results are compared with the conventional finite element method (FEM) and those reported in the related literature. The findings revealed that both the rigid and flexible risers could be modeled in a similar unified analysis model and that the VFIFE method is feasible for solving problems related to the complex behaviors of marine risers.  相似文献   

8.
Local scour, a non-negligible factor in hydraulic engineering, endangers the safety of hydraulic structures. In this work, a numerical model for simulating local scour was constructed, based on the open source code computational fluid dynamics model OpenFOAM. We consider both the bedload and suspended load sediment transport in the scour model and adopt the dynamic mesh method to simulate the evolution of the bed elevation. We use the finite area method to project data between the three-dimensional flow model and the two-dimensional (2D) scour model. We also improved the 2D sand slide method and added it to the scour model to correct the bed bathymetry when the bed slope angle exceeds the angle of repose. Moreover, to validate our scour model, we conducted and compared the results of three experiments with those of the developed model. The validation results show that our developed model can reliably simulate local scour.  相似文献   

9.
采用有限元方法模拟隧道地震波场,采用波场快照与时间记录相结合的方法,研究空洞对隧道地震波场传播的影响,并对含空洞模型的时间记录进行处理,得到数值模型的速度云图和反射层位图。经数据处理表明,采用TSPwin设定默认值处理得到的速度云图与模型设定的空洞位置比较一致,在提取反射层位图上,空洞反射层呈现条带状特征,需要结合速度云图来确定空洞位置,且P波预报的准确性相对较高。对TSP系统的抗噪性进行研究,表明其具有良好的抗噪性能。最后通过对工程实例的处理,验证了数值模拟所得的结论。  相似文献   

10.
目前缺乏针对较强空间特性水文地质计算参数的高效采集方法与管理机制,而且现有孔隙地下水流有限元数值模拟在三维可视化与空间分析等方面仍存在很多不足。因此,本文以有限元数值计算方法和三维地理信息平台为基础,结合GIS空间分析算法和计算机图形学理论,针对孔隙承压地下水有限元分析过程的关键步骤(概念模型构建、空间离散、水文地质参数提取与赋值等),提出了孔隙地下水有限元数值模拟过程在3D GIS下的实现方法和技术框架。基于水文地质钻孔数据和GTP(Generalized Tri-Prism)空间数据模型,以盐城市滨海平原水文地质区为研究区域,实现了地下水系统空间结构特征的三维表达,同时与地下水流有限元数值模型相耦合,提出了3D GIS模型与地下水非稳定流有限元数值模型耦合的核心处理算法,并在此基础上开发了3D GIS地下水流数值模拟系统。应用实例表明,该技术框架可有效简化有限元分析流程、优化模型计算效率、实现地下水有限元数值模拟过程及计算结果的三维可视化。  相似文献   

11.
Debris flows are typical two-phase flows, which commonly accompany erosion in mountainous areas, and may destroy bridge engineering by scouring. In this study, a physically-based two-phase model is applied for the simulation of debris flow scouring of bridge pier. In this model, the shear stress of debris flow on an erodible bed is considered to be a function of the solid shear stress, fluid shear stress, and volume fraction; accordingly, the erosion is incorporated into the two-phase model. Using a highaccuracy computational scheme based on the finite volume method, the model is employed for simulating a dynamic debris flow over an erodible bed. The numerical results are consistent with the experimental data, and verify the feasibility of the two-phase model. Moreover, a simple numerical test is performed to exhibit the fundamental behaviour of debris flow scouring of bridge pier, which shows that the degree of erosion on each side of the pier is higher compared to other areas. The scouring depth is influenced by the variations of solid volume fraction and velocity of debris flow and pier width.  相似文献   

12.
Natural damming of rivers by mass movements is a very common and potentially dangerous phenomena which has been documented all over the world. In this paper, a two-layer model of Savage-Hutter type is presented to simulate the dynamic procedure for the intrusion of landslide into rivers. The two-layer shallow water system is derived by depth averaging the incompressible Navier-Stokes equations with the hydrostatic assumption. A high order accuracy scheme based on the finite volume method is proposed to solve the presented model equations. Several numerical tests are performed to verify the realiability and feasibility of the proposed model. The numerical results indicate that the proposed method can be competent for simulating the dynamic process of landslide intrusion into the river. The interaction effect between both layers has a significant impact on the landslide movement, water fluctuation and wave propagation.  相似文献   

13.
提出一种差分码偏差估计的简化模型,将测站方向上各穿刺点的VTEC简化为一个参数,分时段进行直接估计。为验证该方法的有效性,采用球谐函数建模和基于GIM的估计方法进行比较分析。选用2016-01近200个IGS测站的GPS+GLONASS数据进行实验,并采用CODE提供的产品进行验证。结果表明,对于GPS(GLONASS)卫星DCB,该方法与其他2种方法估计的结果比较接近,与CODE产品相比平均偏差和标准差分别为-0.3~0.5 ns(GPS)、1.3~0.7 ns(GLONASS)和0.05~0.20 ns(GPS)、0.14~1.10 ns(GLONASS);对于接收机DCB,3种方法与CODE产品的平均偏差分别为-0.6~0.7 ns(GPS)和-1.5~1.5 ns(GLONASS)。实验结果验证了差分码偏差估计简化模型的有效性。  相似文献   

14.
Soils with strain-softening behavior — manifesting as a reduction of strength with increasing plastic strain — are commonly found in the natural environment. For slopes in these soils,a progressive failure mechanism can occur due to a reduction of strength with increasing strain. Finite element method based numerical approaches have been widely performed for simulating such failure mechanism,owning to their ability for tracing the formation and development of the localized shear strain. However,the reliability of the currently used approaches are often affected by poor convergence or significant mesh-dependency,and their applicability is limited by the use of complicated soil models. This paper aims to overcome these limitations by developing a finite element approach using a local arc-length controlled iterative algorithm as the solution strategy. In the proposed finite element approach,the soils are simulated with an elastoplastic constitutive model in conjunction with the Mohr-Coulomb yield function. The strain-softening behavior is represented by a piece-wise linearrelationship between the Mohr-Coulomb strength parameters and the deviatoric plastic strain. To assess the reliability of the proposed finite element approach,comparisons of the numerical solutions obtained by different finite element methods and meshes with various qualities are presented. Moreover,a landslide triggered by excavation in a real expressway construction project is analyzed by the presented finite element approach to demonstrate its applicability for practical engineering problems.  相似文献   

15.
Submersible buoy systems are widely used for oceanographic research,ocean engineering and coastal defense.Severe sea environment has obvious effects on the dynamics of submersible buoy systems.Huge tension can occur and may cause the snap of cables,especially during the deployment period.This paper studies the deployment dynamics of submersible buoy systems with numerical and experimental methods.By applying the lumped mass approach,a three-dimensional multi-body model of submersible buoy system is developed considering the hydrodynamic force,tension force and impact force between components of submersible buoy system and seabed.Numerical integration method is used to solve the differential equations.The simulation output includes tension force,trajectory,profile and dropping location and impact force of submersible buoys.In addition,the deployment experiment of a simplified submersible buoy model was carried out.The profile and different nodes' velocities of the submersible buoy are obtained.By comparing the results of the two methods,it is found that the numerical model well simulates the actual process and conditions of the experiment.The simulation results agree well with the results of the experiment such as gravity anchor's location and velocities of different nodes of the submersible buoy.The study results will help to understand the conditions of submersible buoy's deployment,operation and recovery,and can be used to guide the design and optimization of the system.  相似文献   

16.
湖水与地下水交互作用对于水资源合理开发与利用有着重要意义。基于温度示踪的原理,采用解析法、数值法2种方法,分析了湖床底部埋深0~0.4 m湖水与浅层地下水交互关系,并与水动力学方法进行了对比。结果表明,2018年5月20日至28日,湖水与地下水之间的垂向渗流速度为2×10-7~1×10-6 m/s,且在埋深0.4 m时大于埋深0.2 m处。降水会对解析法的结果造成一定影响,0.4 m处受到降雨影响表现为一定的滞后性。无降雨干扰情况下,数值法与水动力学方法估算结果较为吻合,且3种方法的计算结果处于同一数量级。同时,湖床沉积物体积热容和孔隙度2种参数对计算结果影响较大。在半干旱地区湖水与地下水交互研究中,数据较完备时,数值模拟法是更好的选择。   相似文献   

17.
通过对黑河水库左坝肩特殊的岩体组成及结构进行分析研究,以断层破碎带为主要研究对象,结合实验研究并运用有限元等计算方法,对单薄山梁的渗透变形及稳定性进行分析与计算,为实际工程的决策与治理提供理论依据.  相似文献   

18.
本文介绍了一种求解地下水流问题的有限分析法,该方法将解析解结合到数值方法中,从而提高了计算精度,改善了稳定性。算例表明,在网格尺寸相同的情况下,有限分析解比有限差分解高一个数量级,与解析解吻合很好。  相似文献   

19.
讨论了小波分析在地震重力测量数据分析中应用的可能性,并采用基于样条函数的小波分析及其相应的Β小波分别计算了河西地区的重力变化资料,其结果如下:①小波分解可有效分离重力场时间变化的不同空间波长成分,更清晰地看清重力场变化与地震活动的关系。②河西地区重力资料分解结果表明:反映该地区浅部物质变化的重力变化高频部分和反映该地区深部物质变化的重力变化低频部分对永登Ms5.8级地震的反应不明显,而反映该地区中层物质变化的重力变化二、三阶小波分解结果对该地震的反应较明显。重力小波分解计算结果反映的密度变化深度与地震资料统计的震源深度基本一致。  相似文献   

20.
INTRODUCTIONAsoneofthemethodsenablingnumericalsolutionofdifferentialequations,thefinite differ encemethodiswidelyacceptedinthestudyofphysicaloceanography.Afinite differenceschememusthavepropertiesofconvergence ,consistencyandstabilitytoyieldusefulapproximatesolutionoftherelevantdifferentialequations.However,thepropertiesneednotbeverifiedonebyonebecausethewell knownLaxLawassuresthattheconvergenceisequivalenttothestabilityforafinitediffer enceschemewithconsistence .Twomainmethodsforstudyin…  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号