共查询到20条相似文献，搜索用时 78 毫秒
1.
Colin M. Sayers 《Geophysical Prospecting》2009,57(2):187-192
Natural fractures in reservoirs play an important role in determining fluid flow during production and knowledge of the orientation and density of fractures is required to optimize production. Variations in reflection amplitude versus offset (AVO) are sensitive to the presence of fractures but current models used to invert the seismic response often make simplified assumptions that prevent fractured reservoirs from being characterized correctly. For example, many models assume a single set of perfectly aligned fractures, whereas most reservoirs contain several fracture sets with variable orientation within a given fracture set. In addition, many authors only consider the azimuthal variation in the small offset amplitude versus offset and azimuth response (the variation in AVO gradient with azimuth), while the effect of fractures on amplitude versus offset and azimuth increases with increasing offset. In this paper, the variation in the reflection coefficient of seismic P -waves as a function of azimuth and offset due to the presence of multiple sets of fractures with variable orientation within any fracture set is used to determine the components of a second-rank fracture compliance tensor α ij . The variation in the trace of this tensor as a function of position in the reservoir can be used to estimate the variation in fracture density with position in the reservoir and may be used to choose the location of infill wells in the field. The principal axes of α ij reveal the most compliant direction within the reservoir and may be used to optimize the trajectory of deviated wells. The determination of the principal axes of α ij requires wide azimuth acquisition and the use of the small-offset amplitude versus offset and azimuth (the azimuthal variation of the AVO gradient) may give misleading results. 相似文献
2.
In this paper we propose a method for the characterization of naturally fractured reservoirs by quantitative integration of seismic and production data. The method is based on a consistent theoretical frame work to model both effective hydraulic and elastic properties of fractured porous media and a (non‐linear) Bayesian method of inversion that provides information about uncertainties as well as mean (or maximum likelihood) values. We model a fractured reservoir as a porous medium containing a single set of vertical fractures characterized by an unknown fracture density, azimuthal orientation and aperture. We then look at the problem of fracture parameter estimation as a non‐linear inverse problem and try to estimate the unknown fracture parameters by joint inversion of seismic amplitude versus angle and azimuth data and dynamic production data. Once the fracture parameters have been estimated the corresponding effective stiffness and permeability tensors can be estimated using consistent models. A synthetic example is provided to clearly explain and test the workflow. It shows that seismic and production data complement each other, in the sense that the seismic data resolve a non‐uniqueness in the fracture orientation and the production data help to recover the true fracture aperture and permeability, because production data are more sensitive to the fracture aperture than the seismic data. 相似文献
3.
Understanding the effects of in situ fluid content and fracture parameters on seismic characteristics is important for the subsurface exploration and production of fractured porous rocks. The ratio of normal-to-shear fracture compliance is typically utilized as a fluid indicator to evaluate anisotropy and identify fluids filling the fractures, but it represents an underdetermined problem because this fluid indicator varies as a function of both fracture geometry and fluid content. On the bases of anisotropic Gassmann's equation and linear-slip model, we suggest an anisotropic poroelasticity model for fractured porous reservoirs. By combining a perturbed stiffness matrix and asymptotic ray theory, we then construct a direct relationship between the PP-wave reflection coefficients and characteristic parameters of fluids(P-and S-wave moduli) and fractures(fracture quasi-weaknesses), thereby decoupling the effects of fluid and fracture properties on seismic reflection characterization.By incorporating fracture quasi-weakness parameters, we propose a novel parameterization method for elastic impedance variation with offset and azimuth(EIVOA). By incorporating wide-azimuth observable seismic reflection data with regularization constraints, we utilize Bayesian seismic inversion to estimate the fluid content and fracture parameters of fractured porous rocks. Tests on synthetic and real data demonstrate that fluid and fracture properties can be reasonably estimated directly from azimuthal seismic data and the proposed approach provides a reliable method for fluid identification and fracture characterization in a gas-saturated fractured porous reservoir. 相似文献
4.
Since natural fractures in petroleum reservoirs play an important role in determining fluid flow during production, knowledge of the orientation and density of fractures is required to optimize production. This paper outlines the underlying theory and implementation of a fast and efficient algorithm for upscaling a Discrete Fracture Network (DFN) to predict the fluid flow, elastic and seismic properties of fractured rocks. Potential applications for this approach are numerous and include the prediction of fluid flow, elastic and seismic properties for fractured reservoirs, model‐based inversion of seismic Amplitude Versus Offset and Azimuth (AVOA) data and the optimal placement and orientation of infill wells to maximize production. Given that a single fracture network may comprise hundreds of thousands of individual fractures, the sheer size of typical DFNs has tended to limit their practical applications. This paper demonstrates that with efficient algorithms, the utility of Discrete Fracture Networks can be extended far beyond mere visualization. 相似文献
5.
Frequency-dependent amplitude variation with offset offers an effective method for hydrocarbon detections and analysis of fluid flow during production of oil and natural gas within a fractured reservoir. An appropriate representation for the frequency dependency of seismic amplitude variation with offset signatures should incorporate influences of dispersive and attenuating properties of a reservoir and the layered structure for either isotropic or anisotropic dispersion analysis. In this study, we use an equivalent medium permeated with aligned fractures that simulates frequency-dependent anisotropy, which is sensitive to the filled fluid of fractures. The model, where pores and fractures are filled with two different fluids, considers velocity dispersion and attenuation due to mesoscopic wave-induced fluid flow. We have introduced an improved scheme seamlessly linking rock physics modelling and calculations for frequency-dependent reflection coefficients based on the propagator matrix technique. The modelling scheme is performed in the frequency-slowness domain and can properly incorporate effects of both bedded structure of the reservoir and velocity dispersion quantified with frequency-dependent stiffness. Therefore, for a dispersive and attenuated layered model, seismic signatures represent a combined contribution of impedance contrast, layer thickness, anisotropic dispersion of the fractured media and tuning and interference of thin layers, which has been avoided by current conventional methods. Frequency-dependent amplitude variation with offset responses was studied via considering the influences of fracture fills, layer thicknesses and fracture weaknesses for three classes amplitude variation with offset reservoirs. Modelling results show the applicability of the introduced procedure for interpretations of frequency-dependent seismic anomalies associated with both layered structure and velocity dispersion of an equivalent anisotropic medium. The implications indicate that anisotropic velocity dispersion should be incorporated accurately to obtain enhanced amplitude variation with offset interpretations. The presented frequency-dependent amplitude variation with offset modelling procedure offers a useful tool for fracture fluid detections in an anisotropic dispersive reservoir with layered structures. 相似文献
6.
Wide-azimuth seismic data can be used to derive anisotropic parameters on the subsurface by observing variation in subsurface seismic response along different azimuths. Layer-based high-resolution estimates of components of the subsurface anisotropic elastic tensor can be reconstructed by using wide-azimuth P-wave data by combining the kinematic information derived from anisotropic velocity analysis with dynamic information obtained from amplitude versus angle and azimuth analysis of wide-azimuth seismic data. Interval P-impedance, S-impedance and anisotropic parameters associated with anisotropic fracture media are being reconstructed using linearized analysis assuming horizontal transverse anisotropy symmetry. In this paper it is shown how additional assumptions, such as the rock model, can be used to reduce the degrees of freedom in the estimation problem and recover all five anisotropic parameters. Because the use of a rock model is needed, the derived elastic parameters are consistent with the rock model and are used to infer fractured rock properties using stochastic rock physics inversion. The inversion is based on stochastic rock physics modelling and maximum a posteriori estimate of both porosity and crack density parameters associated with the observed elastic parameters derived from both velocity and amplitude versus angle and azimuth analysis. While the focus of this study is on the use of P-wave reflection data, we also show how additional information such as shear wave splitting and/or anisotropic well log data can reduce the assumptions needed to derive elastic parameter and rock properties. 相似文献
7.
Attempts have previously been made to predict anisotropic permeability in fractured reservoirs from seismic Amplitude Versus Angle and Azimuth data on the basis of a consistent permeability‐stiffness model and the anisotropic Gassmann relations of Brown and Korringa. However, these attempts were not very successful, mainly because the effective stiffness tensor of a fractured porous medium under saturated (drained) conditions is much less sensitive to the aperture of the fractures than the corresponding permeability tensor. We here show that one can obtain information about the fracture aperture as well as the fracture density and orientation (which determines the effective permeability) from frequency‐dependent seismic Amplitude Versus Angle and Azimuth data. Our workflow is based on a unified stiffness‐permeability model, which takes into account seismic attenuation by wave‐induced fluid flow. Synthetic seismic Amplitude Versus Angle and Azimuth data are generated by using a combination of a dynamic effective medium theory with Rüger's approximations for PP reflection coefficients in Horizontally Transversely Isotropic media. A Monte Carlo method is used to perform a Bayesian inversion of these synthetic seismic Amplitude Versus Angle and Azimuth data with respect to the parameters of the fractures. An effective permeability model is then used to construct the corresponding probability density functions for the different components of the effective permeability constants. The results suggest that an improved characterization of fractured reservoirs can indeed be obtained from frequency‐dependent seismic Amplitude Versus Angle and Azimuth data, provided that a dynamic effective medium model is used in the inversion process and a priori information about the fracture length is available. 相似文献
8.
We present a method for inversion of fracture compliance matrix components from wide‐azimuth noisy synthetic PS reflection data and quantitatively show that reflection amplitude variations with offset and azimuth for converted PS‐waves are more informative than P‐waves for fracture characterization. We consider monoclinic symmetry for fractured reservoir (parameters chosen from Woodford Shale), which can be formed by two or more sets of vertical fractures embedded in a vertically transverse isotropic background. Components of effective fracture compliance matrices for a medium with monoclinic symmetry are related to the characteristics of the fractured medium. Monte Carlo simulation results show that inversion of PS reflection data is more robust than that of PP reflection data to uncertainties in our a priori knowledge (vertically transverse isotropic parameters of unfractured rock) than PP reflection data. We also show that, while inversion of PP reflections is sensitive to contrasts in elastic properties of upper and lower media, inversion of PS reflections is robust with respect to such contrasts. 相似文献
9.
Wave‐induced fluid flow plays an important role in affecting the seismic dispersion and attenuation of fractured porous rocks. While numerous theoretical models have been proposed for the seismic dispersion and attenuation in fractured porous rocks, most of them neglect the wave‐induced fluid flow resulting from the background anisotropy (e.g. the interlayer fluid flow between different layers) that can be normal in real reservoirs. Here, according to the theories of poroelasticity, we present an approach to study the frequency‐dependent seismic properties of more realistic and complicated rocks, i.e. horizontally and periodically layered porous rock with horizontal and randomly orienting fractures, respectively, distributed in one of the two periodical layers. The approach accounts for the dual effects of the wave‐induced fluid flow between the fractures and the background pores and between different layers (the interlayer fluid flow). Because C33 (i.e., the modulus of the normally incident P‐wave) is directly related to the P‐wave velocity widely measured in the seismic exploration, and its comprehensive dispersion and attenuation are found to be most significant, we study mainly the effects of fracture properties and the stiffness contrast between the different layers on the seismic dispersion and attenuation of C33. The results show that the increasing stiffness contrast enhances the interlayer fluid flow of the layered porous rocks with both horizontal and randomly orienting fractures and weakens the wave‐induced fluid flow between the fractures and the background pores, especially for the layered porous rock with horizontal fractures. The modelling results also demonstrate that for the considered rock construction, the increasing fracture density reduces the interlayer fluid flow while improves the dispersion and attenuation in the fracture‐relevant frequency band. Increasing fracture aspect ratio is found to reduce the dispersion and attenuation in the fracture‐relevant frequency band only, especially for the layered porous rock with horizontal fractures. 相似文献
10.
The transmission of seismic waves in a particular region may influence the hydraulic properties of a rock mass, including permeability, which is one of the most important. To determine the effect of a seismic wave on the hydraulic behavior of a fractured rock mass, systematic numerical modeling was conducted. A number of discrete fracture network(DFN) models with a size of 20 m × 20 m were used as geometrical bases, and a discrete element method(DEM) was employed as a numerical simulation tool. Three different boundary conditions without(Type Ⅰ) and with static(Type Ⅱ) and dynamic(Type Ⅲ) loading were performed on the models, and then their permeability was calculated. The results showed that permeability in Type Ⅲ models was respectively 62.7% and 44.2% higher than in Type I and Type Ⅱ models. This study indicates that seismic waves can affect deep earth, and, according to the results, seismic waves increase the permeability and change the flow rate patterns in a fractured rock mass. 相似文献
11.
Frequency‐ and angle‐dependent poroelastic seismic analysis for highly attenuating reservoirs 
下载免费PDF全文
下载免费PDF全文 Luanxiao Zhao Qiuliang Yao De‐hua Han Rui Zhou Jianhua Geng Hui Li 《Geophysical Prospecting》2017,65(6):1630-1648
We extend the frequency‐ and angle‐dependent poroelastic reflectivity to systematically analyse the characteristic of seismic waveforms for highly attenuating reservoir rocks. It is found that the mesoscopic fluid pressure diffusion can significantly affect the root‐mean‐square amplitude, frequency content, and phase signatures of seismic waveforms. We loosely group the seismic amplitude‐versus‐angle and ‐frequency characteristics into three classes under different geological circumstances: (i) for Class‐I amplitude‐versus‐angle and ‐frequency, which corresponds to well‐compacted reservoirs having Class‐I amplitude‐versus‐offset characteristic, the root‐mean‐square amplitude at near offset is boosted at high frequency, whereas seismic energy at far offset is concentrated at low frequency; (ii) for Class‐II amplitude‐versus‐angle and ‐frequency, which corresponds to moderately compacted reservoirs having Class‐II amplitude‐versus‐offset characteristic, the weak seismic amplitude might exhibit a phase‐reversal trend, hence distorting both the seismic waveform and energy distribution; (iii) for Class‐III amplitude‐versus‐angle and ‐frequency, which corresponds to unconsolidated reservoir having Class‐III amplitude‐versus‐offset characteristic, the mesoscopic fluid flow does not exercise an appreciable effect on the seismic waveforms, but there exists a non‐negligible amplitude decay compared with the elastic seismic responses based on the Zoeppritz equation. 相似文献
12.
Fluid identification in fractured reservoirs is a challenging issue and has drawn increasing attentions. As aligned fractures in subsurface formations can induce anisotropy, we must choose parameters independent with azimuths to characterize fractures and fluid effects such as anisotropy parameters for fractured reservoirs. Anisotropy is often frequency dependent due to wave-induced fluid flow between pores and fractures. This property is conducive for identifying fluid type using azimuthal seismic data in fractured reservoirs. Through the numerical simulation based on Chapman model, we choose the P-wave anisotropy parameter dispersion gradient (PADG) as the new fluid factor. PADG is dependent both on average fracture radius and fluid type but independent on azimuths. When the aligned fractures in the reservoir are meter-scaled, gas-bearing layer could be accurately identified using PADG attribute. The reflection coefficient formula for horizontal transverse isotropy media by Rüger is reformulated and simplified according to frequency and the target function for inverting PADG based on frequency-dependent amplitude versus azimuth is derived. A spectral decomposition method combining Orthogonal Matching Pursuit and Wigner–Ville distribution is used to prepare the frequency-division data. Through application to synthetic data and real seismic data, the results suggest that the method is useful for gas identification in reservoirs with meter-scaled fractures using high-qualified seismic data. 相似文献
13.
Seismic wave propagation in reservoir rocks is often strongly affected by fractures and micropores. Elastic properties of fractured reservoirs are studied using a fractured porous rock model, in which fractures are considered to be embedded in a homogeneous porous background. The paper presents an equivalent media model for fractured porous rocks. Fractures are described in a stress‐strain relationship in terms of fracture‐induced anisotropy. The equations of poroelasticity are used to describe the background porous matrix and the contents of the fractures are inserted into a matrix. Based on the fractured equivalent‐medium theory and Biot's equations of poroelasticity, two sets of porosity are considered in a constitutive equation. The porous matrix permeability and fracture permeability are analysed by using the continuum media seepage theory in equations of motion. We then design a fractured porous equivalent medium and derive the modified effective constants for low‐frequency elastic constants due to the presence of fractures. The expressions of elastic constants are concise and are directly related to the properties of the main porous matrix, the inserted fractures and the pore fluid. The phase velocity and attenuation of the fractured porous equivalent media are investigated based on this model. Numerical simulations are performed. We show that the fractures and pores strongly influence wave propagation, induce anisotropy and cause poroelastic behaviour in the wavefields. We observe that the presence of fractures gives rise to changes in phase velocity and attenuation, especially for the slow P‐wave in the direction parallel to the fracture plane. 相似文献
14.
Understanding fracture orientations is important for optimal field development of fractured reservoirs because fractures can act as conduits for fluid flow. This is especially true for unconventional reservoirs (e.g., tight gas sands and shale gas). Using walkaround Vertical Seismic Profiling (VSP) technology presents a unique opportunity to identify seismic azimuthal anisotropy for use in mapping potential fracture zones and their orientation around a borehole. Saudi Aramco recently completed the acquisition, processing and analysis of a walkaround VSP survey through an unconventional tight gas sand reservoir to help characterize fractures. In this paper, we present the results of the seismic azimuthal anisotropy analysis using seismic traveltime, shear‐wave splitting and amplitude attenuation. The azimuthal anisotropy results are compared to the fracture orientations derived from dipole sonic and image logs. The image log interpretation suggests that an orthorhombic fracture system is present. VSP data show that the P‐wave traveltime anisotropy direction is NE to SW. This is consistent with the cemented fractures from the image log interpretation. The seismic amplitude attenuation anisotropy direction is NW to SE. This is consistent with one of the two orientations obtained using transverse to radial amplitude ratio analysis, with the dipole sonic and with open fracture directions interpreted from image log data. 相似文献
15.
Average elastic properties of a fluid‐saturated fractured rock are discussed in association with the extremely slow and dispersive Krauklis wave propagation within individual fractures. The presence of the Krauklis wave increases P‐wave velocity dispersion and attenuation with decreasing frequency. Different laws (exponential, power, fractal, and gamma laws) of distribution of the fracture length within the rock show more velocity dispersion and attenuation of the P‐wave for greater fracture density, particularly at low seismic frequencies. The results exhibit a remarkable difference in the P‐wave reflection coefficient for frequency and angular dependency from the fractured layer in comparison with the homogeneous layer. The biggest variation in behaviour of the reflection coefficient versus incident angle is observed at low seismic frequencies. The proposed approach and results of calculations allow an interpretation of abnormal velocity dispersion, high attenuation, and special behaviour of reflection coefficients versus frequency and angle of incidence as the indicators of fractures. 相似文献
16.
The effect of fracture network geometry on free convection in fractured rock is studied using numerical simulations. We examine the structural properties of fracture networks that control the onset and strength of free convection and the patterns of density-dependent flow. Applicability of the equivalent porous medium approach (EPM) is also tested, and recommendations are given, for which situations the EPM approach is valid. To date, the structural properties of fracture networks that determine free convective flow are examined only in few, predominantly simplified regular fracture networks. We consider fracture networks containing continuous, discontinuous, orthogonal and/or inclined discrete fractures embedded in a low-permeability rock matrix. The results indicate that bulk permeability is not adequate to infer the occurrence and magnitude of free convection in fractured rock. Fracture networks can inhibit or promote convection depending on the fracture network geometry. Continuous fracture circuits are the crucial geometrical feature of fracture networks, because large continuous fracture circuits with a large vertical extent promote convection. The likelihood of continuous fracture circuits and thus of free convection increases with increasing fracture density and fracture length, but individual fracture locations may result in great deviances in strength of convection between statistically equivalent fracture networks such that prediction remains subject to large uncertainty. 相似文献
17.
We present a method to determine equivalent permeability of fractured porous media. Inspired by the previous flow-based upscaling methods, we use a multi-boundary integration approach to compute flow rates within fractures. We apply a recently developed multi-point flux approximation Finite Volume method for discrete fracture model simulation. The method is verified by upscaling an arbitrarily oriented fracture which is crossing a Cartesian grid. We demonstrate the method by applying it to a long fracture, a fracture network and the fracture network with different matrix permeabilities. The equivalent permeability tensors of a long fracture crossing Cartesian grids are symmetric, and have identical values. The application to the fracture network case with increasing matrix permeabilities shows that the matrix permeability influences more the diagonal terms of the equivalent permeability tensor than the off-diagonal terms, but the off-diagonal terms remain important to correctly assess the flow field. 相似文献
18.
Joint PP‐ and PSV‐wave amplitudes versus offset and azimuth inversion for fracture compliances in horizontal transversely isotropic media 下载免费PDF全文
下载免费PDF全文 We propose a robust approach for the joint inversion of PP‐ and PSV‐wave angle gathers along different azimuths for the elastic properties of the homogeneous isotropic host rock and excess compliances due to the presence of fractures. Motivated by the expression of fluid content indicator in fractured reservoirs and the sensitivity of Lamé impedances to fluid type, we derive PP‐ and PSV‐wave reflection coefficients in terms of Lamé impedances, density, and fracture compliances for an interface separating two horizontal transversely isotropic media. Following a Bayesian framework, we construct an objective function that includes initial models. We employ the iteratively reweighted least‐squares algorithm to solve the inversion problem to estimate unknown parameters (i.e., Lamé impedances, density, and fracture compliances) from PP‐ and PSV‐wave angle gathers along different azimuths. Synthetic tests reveal that the unknown parameters estimated using the joint inversion approach match true values better than those estimated using a PP‐wave amplitude inversion only. A real data test indicates that reasonable results for subsurface fracture detection are obtained from the joint inversion approach. 相似文献
19.
A systematic investigation of the effect of configurations of stochastically distributed fracture networks on hydraulic behaviour for fractured rock masses could provide either quantitative or qualitative correlation between the structural configuration of the fracture network and its corresponding hydraulic behaviour, and enhance our understanding of appropriate application of groundwater flow and contaminant transport modelling in fractured rock masses. In this study, the effect of block sizes, intersection angles of fracture sets, standard deviations of fracture orientation, and fracture densities on directional block hydraulic conductivity and representative elementary volume is systematically investigated in two dimensions by implementing a numerical discrete fracture fluid flow model and incorporating stochastically distributed fracture configurations. It is shown from this investigation that the configuration of a stochastically distributed fracture network has a significant quantitative or qualitative effect on the hydraulic behaviour of fractured rock masses. Compared with the deterministic fracture configurations that have been extensively dealt with in a previous study, this investigation is expected to be more practical and adequate, since fracture geometry parameters are inherently stochastically distributed in the field. Moreover, the methodology and approach presented in this study may be generally applied to any fracture system in investigating the hydraulic behaviours from configurations of the fracture system while establishing a ‘bridge’ from the discrete fracture network flow modelling to equivalent continuum modelling in fractured rock masses. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
20.
Efficient volumetric extraction of most positive/negative curvature and flexure for fracture characterization from 3D seismic data 下载免费PDF全文
下载免费PDF全文 Most positive/negative curvature and flexure are among the most useful seismic attributes for detecting faults and fractures in the subsurface based on the geometry of seismic reflections. When applied to fracture characterization and modelling of a fractured reservoir, their magnitude and azimuth help quantify both the intensity and orientation of fracturing, respectively. However, previous efforts focus on estimating only the magnitude of both attributes, whereas their associated azimuth is ignored in three‐dimensional (3D) seismic interpretation. This study presents an efficient algorithm for simultaneously evaluating both the magnitude and azimuth of most positive/negative curvature and flexure from 3D seismic data. The approach implemented in this study is analytically more accurate and computationally more efficient compared with the existing approach. The added value of extracting most positive/negative curvature and flexure is demonstrated through the application to a fractured reservoir at Teapot Dome (Wyoming). First, the newly extracted attributes make computer‐aided fault/fracture decomposition possible. This allows interpreters to focus on one particular component for fracture characterization at a time, so that a composite fractured reservoir could be partitioned into different components for detailed analysis. Second, curvature/flexure azimuth allows interpreters to plot fracture histogram and/or rose diagram in an automatic and quantitative manner. Compared with the conventional plotting rose diagram based on manual measurements, automatic plotting is more efficient and offers unbiased insights into fracture systems by illuminating the most likely orientations of natural fractures in fractured reservoirs. 相似文献