共查询到20条相似文献，搜索用时 828 毫秒
1.
Amplitude variation with amplitude or angle (AVO/AVA) inversion has been widely utilized in exploration geophysics to estimate the formation of elastic parameters underground. However, conventional AVO/AVA inversion approaches are based on different approximate equations of Zoeppritz equations under various hypotheses, such as limited incident angles or weak property contrast, which reduces their prediction precision theoretically. This study combines the exact P-wave Zoeppritz equation with a nonlinear direct inversion algorithm to estimate the six parameters imbedded in the exact equation simultaneously. A more direct and explicit expression of the Zoeppritz equation is discussed in the case of P-wave exploration, under which condition the incident longitudinal wave produces the reflected longitudinal (P–P) wave and upgoing converted shear (P–SV) wave. Utilizing this equation as the forward solver, a nonlinear direct inversion method is introduced to implement the direct inversion of the six parameters including P-wave velocities, S-wave velocities, and densities in the upper and lower media around an interface, respectively. This nonlinear algorithm is able to estimate the inverse of the nonlinear function in terms of model parameters directly rather than in a conventional optimization way. Model tests illustrate that the nonlinear direct inversion method shows great potential to estimate multiple parameters with the exact Zoeppritz equation. 相似文献
2.
Tijmen Jan Moser 《Geophysical Prospecting》2014,62(3):475-490
We study the stability of source mechanisms inverted from data acquired at surface and near‐surface monitoring arrays. The study is focused on P‐wave data acquired on vertical components, as this is the most common type of acquisition. We apply ray modelling on three models: a fully homogeneous isotropic model, a laterally homogeneous isotropic model and a laterally homogeneous anisotropic model to simulate three commonly used models in inversion. We use geometries of real arrays, one consisting in surface receivers and one consisting in ‘buried’ geophones at the near‐surface. Stability was tested for two of the frequently observed source mechanisms: strike‐slip and dip‐slip and was evaluated by comparing the parameters of correct and inverted mechanisms. We assume these double‐couple source mechanisms and use quantitatively the inversion allowing non‐double‐couple components to measure stability of the inversion. To test the robustness we inverted synthetic amplitudes computed for a laterally homogeneous isotropic model and contaminated with noise using a fully homogeneous model in the inversion. Analogously amplitudes computed in a laterally homogeneous anisotropic model were inverted in all three models. We show that a star‐like surface acquisition array provides very stable inversion up to a very high level of noise in data. Furthermore, we reveal that strike‐slip inversion is more stable than dip‐slip inversion for the receiver geometries considered here. We show that noise and an incorrect velocity model may result in narrow bands of source mechanisms in Hudson's plots. 相似文献
3.
Leonardo Azevedo Rúben Nunes Amílcar Soares Guenther Schwedersky Neto Teresa S. Martins 《Geophysical Prospecting》2018,66(Z1):116-131
Seismic inversion plays an important role in reservoir modelling and characterisation due to its potential for assessing the spatial distribution of the sub‐surface petro‐elastic properties. Seismic amplitude‐versus‐angle inversion methodologies allow to retrieve P‐wave and S‐wave velocities and density individually allowing a better characterisation of existing litho‐fluid facies. We present an iterative geostatistical seismic amplitude‐versus‐angle inversion algorithm that inverts pre‐stack seismic data, sorted by angle gather, directly for: density; P‐wave; and S‐wave velocity models. The proposed iterative geostatistical inverse procedure is based on the use of stochastic sequential simulation and co‐simulation algorithms as the perturbation technique of the model parametre space; and the use of a genetic algorithm as a global optimiser to make the simulated elastic models converge from iteration to iteration. All the elastic models simulated during the iterative procedure honour the marginal prior distributions of P‐wave velocity, S‐wave velocity and density estimated from the available well‐log data, and the corresponding joint distributions between density versus P‐wave velocity and P‐wave versus S‐wave velocity. We successfully tested and implemented the proposed inversion procedure on a pre‐stack synthetic dataset, built from a real reservoir, and on a real pre‐stack seismic dataset acquired over a deep‐water gas reservoir. In both cases the results show a good convergence between real and synthetic seismic and reliable high‐resolution elastic sub‐surface Earth models. 相似文献
4.
在VTI介质中,由于引入了各向异性参数使得多分量多参数地震反演问题的非线性程度显著增加,因此采用传统的权重加权法构建单目标函数进行反演得到的反演结果往往并不理想.本文以反射率法为基础,结合快速非支配排序遗传算法研究了一种VTI介质的多分量叠前联合反演方法.该方法以反射率法为正演方程,应用互相关原理构建PP波和PSV波的多目标函数,进而采用快速非支配排序遗传算法全局寻优获得VTI介质的厚度、纵横波速度、密度和各向异性参数等多个参数.在正演的过程中,反射率法可以考虑几何扩散、吸收衰减、透射损失、多次波以及纵横波旅行时不匹配等地震波传播效应,更能精确地描述地震波在地下地层中的真实传播情况;在反演的过程中,快速非支配排序遗传算法可以在不引入权重系数的条件下同时优化多个目标函数,获得联合反演问题的Pareto最优解,既不添加权重系数影响又充分利用多分量地震数据.模型测试结果验证了该反演方法的有效性和可行性. 相似文献
5.
Anisotropy is often observed due to the thin layering or aligned micro‐structures, like small fractures. At the scale of cross‐well tomography, the anisotropic effects cannot be neglected. In this paper, we propose a method of full‐wave inversion for transversely isotropic media and we test its robustness against structured noisy data. Optimization inversion techniques based on a least‐square formalism are used. In this framework, analytical expressions of the misfit function gradient, based on the adjoint technique in the time domain, allow one to solve the inverse problem with a high number of parameters and for a completely heterogeneous medium. The wave propagation equation for transversely isotropic media with vertical symmetry axis is solved using the finite difference method on the cylindrical system of coordinates. This system allows one to model the 3D propagation in a 2D medium with a revolution symmetry. In case of approximately horizontal layering, this approximation is sufficient. The full‐wave inversion method is applied to a crosswell synthetic 2‐component (radial and vertical) dataset generated using a 2D model with three different anisotropic regions. Complex noise has been added to these synthetic observed data. This noise is Gaussian and has the same amplitude f?k spectrum as the data. Part of the noise is localized as a coda of arrivals, the other part is not localized. Five parameter fields are estimated, (vertical) P‐wave velocity, (vertical) S‐wave velocity, volumetric mass and the Thomsen anisotropic parameters epsilon and delta. Horizontal exponential correlations have been used. The results show that the full‐wave inversion of cross‐well data is relatively robust for high‐level noise even for second‐order parameters such as Thomsen epsilon and delta anisotropic parameters. 相似文献
6.
Joint facies and rock properties Bayesian amplitude‐versus‐offset inversion using Markov random fields 
下载免费PDF全文
下载免费PDF全文 Seismic reflection pre‐stack angle gathers can be simultaneously inverted within a joint facies and elastic inversion framework using a hierarchical Bayesian model of elastic properties and categorical classes of rock and fluid properties. The Bayesian prior implicitly supplies low frequency information via a set of multivariate compaction trends for each rock and fluid type, combined with a Markov random field model of lithotypes, which carries abundance and continuity preferences. For the likelihood, we use a simultaneous, multi‐angle, convolutional model, which quantifies the data misfit probability using wavelets and noise levels inferred from well ties. Under Gaussian likelihood and facies‐conditional prior models, the posterior has simple analytic form, and the maximum a‐posteriori inversion problem boils down to a joint categorical/continuous non‐convex optimisation problem. To solve this, a set of alternative, increasingly comprehensive optimisation strategies is described: (i) an expectation–maximisation algorithm using belief propagation, (ii) a globalisation of method (i) using homotopy, and (iii) a discrete space approach using simulated annealing. We find that good‐quality inversion results depend on both sensible, elastically separable facies definitions, modest resolution ambitions, reasonably firm abundance and continuity parameters in the Markov random field, and suitable choice of algorithm. We suggest usually two to three, perhaps four, unknown facies per sample, and usage of the more expensive methods (homotopy or annealing) when the rock types are not strongly distinguished in acoustic impedance. Demonstrations of the technique on pre‐stack depth‐migrated field data from the Exmouth basin show promising agreements with lithological well data, including prediction accuracy improvements of 24% in and twofold in density, in comparison to a standard simultaneous inversion. Much clearer and extensive recovery of the thin Pyxis gas field was evident using stronger coupling in the Markov random field model and use of the homotopy or annealing algorithms. 相似文献
7.
Filters for migrated offset substacks are designed by partial coherence analysis to predict ‘normal’ amplitude variation with offset (AVO) in an anomaly free area. The same prediction filters generate localized prediction errors when applied in an AVO‐anomalous interval. These prediction errors are quantitatively related to the AVO gradient anomalies in a background that is related to the minimum AVO anomaly detectable from the data. The prediction‐error section is thus used to define a reliability threshold for the identification of AVO anomalies. Coherence analysis also enables quality control of AVO analysis and inversion. For example, predictions that are non‐localized and/or do not show structural conformity may indicate spatial variations in amplitude–offset scaling, seismic wavelet or signal‐to‐noise (S/N) ratio content. Scaling and waveform variations can be identified from inspection of the prediction filters and their frequency responses. S/N ratios can be estimated via multiple coherence analysis. AVO inversion of seismic data is unstable if not constrained. However, the use of a constraint on the estimated parameters has the undesirable effect of introducing biases into the inverted results: an additional bias‐correction step is then needed to retrieve unbiased results. An alternative form of AVO inversion that avoids additional corrections is proposed. This inversion is also fast as it inverts only AVO anomalies. A spectral coherence matching technique is employed to transform a zero‐offset extrapolation or near‐offset substack into P‐wave impedance. The same technique is applied to the prediction‐error section obtained by means of partial coherence, in order to estimate S‐wave velocity to P‐wave velocity (VS/VP) ratios. Both techniques assume that accurate well ties, reliable density measurements and P‐wave and S‐wave velocity logs are available, and that impedance contrasts are not too strong. A full Zoeppritz inversion is required when impedance contrasts that are too high are encountered. An added assumption is made for the inversion to the VS/VP ratio, i.e. the Gassmann fluid‐substitution theory is valid within the reservoir area. One synthetic example and one real North Sea in‐line survey illustrate the application of the two coherence methods. 相似文献
8.
Analysis of different parameterisations of waveform inversion of compressional body waves in an elastic transverse isotropic Earth with a vertical axis of symmetry 下载免费PDF全文
下载免费PDF全文 In a multi‐parameter waveform inversion, the choice of the parameterisation influences the results and their interpretations because leakages and the tradeoff between parameters can cause artefacts. We review the parameterisation selection when the inversion focuses on the recovery of the intermediate‐to‐long wavenumbers of the compressional velocities from the compressional body (P) waves. Assuming a transverse isotropic medium with a vertical axis of symmetry and weak anisotropy, analytical formulas for the radiation patterns are developed to quantify the tradeoff between the shear velocity and the anisotropic parameters and the effects of setting to zero the shear velocity in the acoustic approach. Because, in an anisotropic medium, the radiation patterns depend on the angle of the incident wave with respect to the vertical axis, two particular patterns are discussed: a transmission pattern when the ingoing and outgoing slowness vectors are parallel and a reflection pattern when the ingoing and outgoing slowness vectors satisfy Snell's law. When the inversion aims at recovering the long‐to‐intermediate wavenumbers of the compressional velocities from the P‐waves, we propose to base the parameterisation choice on the transmission patterns. Since the P‐wave events in surface seismic data do not constrain the background (smooth) vertical velocity due to the velocity/depth ambiguity, the preferred parameterisation contains a parameter that has a transmission pattern concentrated along the vertical axis. This parameter can be fixed during the inversion which reduces the size of the model space. The review of several parameterisations shows that the vertical velocity, the Thomsen parameter δ, or the Thomsen parameter ε have a transmission pattern along the vertical axis depending on the parameterisation choice. The review of the reflection patterns of those selected parameterisations should be done in the elastic context. Indeed, when reflection data are also inverted, there are potential leakages of the shear parameter at intermediate angles when we carry out acoustic inversion. 相似文献
9.
Iteratively re‐weighted and refined least squares algorithm for robust inversion of geophysical data 下载免费PDF全文
下载免费PDF全文 A robust metric of data misfit such as the ?1‐norm is required for geophysical parameter estimation when the data are contaminated by erratic noise. Recently, the iteratively re‐weighted and refined least‐squares algorithm was introduced for efficient solution of geophysical inverse problems in the presence of additive Gaussian noise in the data. We extend the algorithm in two practically important directions to make it applicable to data with non‐Gaussian noise and to make its regularisation parameter tuning more efficient and automatic. The regularisation parameter in iteratively reweighted and refined least‐squares algorithm varies with iteration, allowing the efficient solution of constrained problems. A technique is proposed based on the secant method for root finding to concentrate on finding a solution that satisfies the constraint, either fitting to a target misfit (if a bound on the noise is available) or having a target size (if a bound on the solution is available). This technique leads to an automatic update of the regularisation parameter at each and every iteration. We further propose a simple and efficient scheme that tunes the regularisation parameter without requiring target bounds. This is of great importance for the field data inversion where there is no information about the size of the noise and the solution. Numerical examples from non‐stationary seismic deconvolution and velocity‐stack inversion show that the proposed algorithm is efficient, stable, and robust and outperforms the conventional and state‐of‐the‐art methods. 相似文献
10.
Based on the empirical Gardner equation describing the relationship between density and compressional wave velocity, the converted wave reflection coefficient extrema attributes for AVO analysis are proposed and the relations between the extrema position and amplitude, average velocity ratio across the interface, and shear wave reflection coefficient are derived. The extrema position is a monotonically decreasing function of average velocity ratio, and the extrema amplitude is a function of average velocity ratio and shear wave reflection coefficient. For theoretical models, the average velocity ratio and shear wave reflection coefficient are inverted from the extrema position and amplitude obtained from fitting a power function to converted wave AVO curves. Shear wave reflection coefficient sections have clearer physical meaning than conventional converted wave stacked sections and establish the theoretical foundation for geological structural interpretation and event correlation. ＂The method of inverting average velocity ratio and shear wave reflection coefficient from the extrema position and amplitude obtained from fitting a power function is applied to real CCP gathers. The inverted average velocity ratios are consistent with those computed from compressional and shear wave well logs. 相似文献
11.
本文提出一种角度部分叠加资料同时反演纵波速度和泊松比的方法.以角度部分叠加资料为基础,利用地震波振幅随入射角变化与弹性参数间的数学关系,基于非线性最优化理论,通过将最小平方问题转化为大型带状矩阵的求解问题,采用测井约束逐道外推技术依次求得该角度剖面每个点的纵波和泊松比值.通过由每个角度叠加剖面反演得到的相应角度范围的纵波速度和泊松比剖面的对比分析,进一步得到地震波垂直入射时的纵波速度和泊松比,为地震资料的岩性及含气性解释提供丰富的参数信息. 相似文献
12.
Full waveform inversion using oriented time‐domain imaging method for vertical transverse isotropic media 下载免费PDF全文
下载免费PDF全文 Full waveform inversion for reflection events is limited by its linearised update requirements given by a process equivalent to migration. Unless the background velocity model is reasonably accurate, the resulting gradient can have an inaccurate update direction leading the inversion to converge what we refer to as local minima of the objective function. In our approach, we consider mild lateral variation in the model and, thus, use a gradient given by the oriented time‐domain imaging method. Specifically, we apply the oriented time‐domain imaging on the data residual to obtain the geometrical features of the velocity perturbation. After updating the model in the time domain, we convert the perturbation from the time domain to depth using the average velocity. Considering density is constant, we can expand the conventional 1D impedance inversion method to two‐dimensional or three‐dimensional velocity inversion within the process of full waveform inversion. This method is not only capable of inverting for velocity, but it is also capable of retrieving anisotropic parameters relying on linearised representations of the reflection response. To eliminate the crosstalk artifacts between different parameters, we utilise what we consider being an optimal parametrisation for this step. To do so, we extend the prestack time‐domain migration image in incident angle dimension to incorporate angular dependence needed by the multiparameter inversion. For simple models, this approach provides an efficient and stable way to do full waveform inversion or modified seismic inversion and makes the anisotropic inversion more practicable. The proposed method still needs kinematically accurate initial models since it only recovers the high‐wavenumber part as conventional full waveform inversion method does. Results on synthetic data of isotropic and anisotropic cases illustrate the benefits and limitations of this method. 相似文献
13.
海洋勘探环境可以抽象为下伏固体与上覆流体相互耦合的介质,本文针对流-固边界耦合介质提出了一种高效、稳定的多参数（速度和密度）全波形反演方法.本文采用弹性波一阶位移-应力方程作为过渡层耦合声波压力方程与弹性波位移方程来模拟耦合环境,相比于传统的交错网格建模方法或者构建连续性条件,本文提出的方法在正演精度和稳定性上凸显出很大优势,极大降低了计算内存.反演策略对多参数全波形反演至关重要,由于不同参数之间的相互耦合使得密度在多参数全波形反演中较难获得,因此本文将非均匀流-固边界耦合介质多参数全波形反演分为两个步骤完成：第一步利用变密度声波方程结合推导出的密度梯度算子进行纵波速度和密度的双参数反演;第二步根据链式法则求取横波速度的梯度,结合第一步的反演结果使用流-固边界耦合方程反演横波速度.最后通过与声波动方程数值模拟结果对比证明正演算法的准确性;上覆流体的Marmousi-2模型的数值试验测试说明反演方法的有效性和适应性. 相似文献
14.
实现反演偏导矩阵的计算是基于导数最优化反演方法的关键,然而目前的地震反演几乎都是基于Zoeppritz方程近似实现的,使计算精度和适应范围受到限制.本文利用Zoeppritz方程建立了反射系数对地层介质密度比偏导方程,导出了Zoeppritz方程矩阵元对介质密度比的导数.通过求解偏导方程获得了反射系数对介质密度比偏导数的精确计算(考虑了速度中含介质密度的问题).利用数值算例分析了反射系数对介质密度比偏导数的变化特点.本文采用直接解法求解偏导矩阵方程组,获得了快的计算速度和高的计算精度,为实现地层介质密度反演(包括大角度反演)提供了偏导矩阵的计算方法. 相似文献
15.
Seismic velocity is important to migration of seismic data,interpretation of lithology and lithofacies as well asprediction of reservoir.The information of shear wave velocity is required to reduce the uncertainty for discrimi-nating lithology,identifying fluid type in porous material and calculating gas saturation in reservoir prediction.Based on Zoeppritz equations,a numeral and scanning method was proposed in this paper.Shear wave velocitycan be calculated with prestack converted wave data.The effects were demonstrated by inversion of theoreticaland real seismic data. 相似文献
16.
17.
Michele Cercato 《Geophysical Prospecting》2011,59(2):210-226
Practical applications of surface wave inversion demand reliable inverted shear‐wave profiles and a rigorous assessment of the uncertainty associated to the inverted parameters. As a matter of fact, the surface wave inverse problem is severely affected by solution non‐uniqueness: the degree of non‐uniqueness is closely related to the complexity of the observed dispersion pattern and to the experimental inaccuracies in dispersion measurements. Moreover, inversion pitfalls may be connected to specific problems such as inadequate model parametrization and incorrect identification of the surface wave modes. Consequently, it is essential to tune the inversion problem to the specific dataset under examination to avoid unnecessary computations and possible misinterpretations. In the heuristic inversion algorithm presented in this paper, different types of model constraints can be easily introduced to bias constructively the solution towards realistic estimates of the 1D shear‐wave profile. This approach merges the advantages of global inversion, like the extended exploration of the parameter space and a theoretically rigorous assessment of the uncertainties on the inverted parameters, with the practical approach of Lagrange multipliers, which is often used in deterministic inversion, which helps inversion to converge towards models with desired properties (e.g., ‘smooth’ or ‘minimum norm' models). In addition, two different forward kernels can be alternatively selected for direct‐problem computations: either the conventional modal inversion or, instead, the direct minimization of the secular function, which allows the interpreter to avoid mode identification. A rigorous uncertainty assessment of the model parameters is performed by posterior covariance analysis on the accepted solutions and the modal superposition associated to the inverted models is investigated by full‐waveform modelling. This way, the interpreter has several tools to address the more probable sources of inversion pitfalls within the framework of a rigorous and well‐tested global inversion algorithm. The effectiveness and the versatility of this approach, as well as the impact of the interpreter's choices on the final solution and on its posterior uncertainty, are illustrated using both synthetic and real data. In the latter case, the inverted shear velocity profiles are blind compared with borehole data. 相似文献
18.
基于虚拟偏移距方法的各向异性转换波保幅叠前时间偏移 总被引：2，自引：1，他引：1
In this paper, we use the method of pseudo-offset migration （POM） to complete converted wave pre-stack time migration with amplitude-preservation in an anisotropic medium. The method maps the original traces into common conversion scatter point （CCSP） gathers directly by POM, which simplifies the conventional processing procedure for converted waves. The POM gather fold and SNR are high, which is favorable for velocity analysis and especially suitable for seismic data with low SNR. We used equivalent anisotropic theory to compute anisotropic parameters. Based on the scattering wave traveltime equation in a VTI medium, the POM pseudo-offset migration in anisotropic media was deduced. By amplitude-preserving POM gather mapping, velocity analysis, stack processing, and so on, the anisotropic migration results were acquired. The forward modeling computation and actual data processing demonstrate the validity of converted wave pre-stack time migration with amplitude-preservation using the anisotropic POM method. 相似文献
19.
Prestack seismic inversion plays an important role in estimating elastic parameters that are sensitive to reservoirs and fluid underground. In this paper, a simultaneous inversion method named FMR‐AVA (Fluid Factor, Mu (Shear modulus), Rho (Density)‐Amplitude Variation with Angle) is proposed based on partial angle stack seismic gathers. This method can be used for direct inversion for the fluid factor, shear modulus and density of heterogeneous reservoirs. Firstly, an FMR approximation equation of a reflection coefficient is derived based on poroelasticity with P‐ and S‐wave moduli. Secondly, a stable simultaneous AVA inversion approach is presented in a Bayesian scheme. This approach has little dependence on initial models. Furthermore, it can be applied in heterogeneous reservoirs whose initial models for inversion are not easy to establish. Finally, a model test shows the superiority of this FMR‐AVA inversion method in stability and independence of initial models. We obtain a reasonable fluid factor, shear modulus and density even with smooth initial models and moderate Gaussian noise. A real data case example shows that the inverted fluid factor, shear modulus and density fit nicely with well log interpretation results, which verifies the effectiveness of the proposed method. 相似文献
20.
Liangguo Dong Zhongyi Fan Hongzhi Wang Benxin Chi Yuzhu Liu 《Geophysical Prospecting》2018,66(8):1503-1520
Reflection full waveform inversion can update subsurface velocity structure of the deeper part, but tends to get stuck in the local minima associated with the waveform misfit function. These local minima cause cycle skipping if the initial background velocity model is far from the true model. Since conventional reflection full waveform inversion using two‐way wave equation in time domain is computationally expensive and consumes a large amount of memory, we implement a correlation‐based reflection waveform inversion using one‐way wave equations to retrieve the background velocity. In this method, one‐way wave equations are used for the seismic wave forward modelling, migration/de‐migration and the gradient computation of objective function in frequency domain. Compared with the method using two‐way wave equation, the proposed method benefits from the lower computational cost of one‐way wave equations without significant accuracy reduction in the cases without steep dips. It also largely reduces the memory requirement by an order of magnitude than implementation using two‐way wave equation both for two‐ and three‐dimensional situations. Through numerical analysis, we also find that one‐way wave equations can better construct the low wavenumber reflection wavepath without producing high‐amplitude short‐wavelength components near the image points in the reflection full waveform inversion gradient. Synthetic test and real data application show that the proposed method efficiently updates the background velocity model. 相似文献