共查询到20条相似文献，搜索用时 15 毫秒
1.
Drainage basin object-based method for regional-scale landform classification: a case study of loess area in China 总被引：1，自引：0，他引：1
Landform classification is one of the most important procedures in recognizing and dividing earth surface landforms. However, topographical homogeneity and differences in regional-scale landforms are often ignored by traditional pixel- and object-based landform classification methods based on digital elevation models (DEMs). In this work, a drainage basin object-based method for classifying regional-scale landforms is proposed. Drainage basins with least critical areas are first delineated from DEMs. Then, terrain derivatives of mean elevation, mean slope, drainage density, drainage depth, and terrain texture are employed to characterize the morphology of the drainage basins. Finally, a decision tree based on the topographical characteristics of the drainage basins is constructed and employed to determine the landform classification law. The experiment is validated in the landform classification of regional-scale loess areas in China. Results show that clear boundaries exist in different landforms at the regional scale. Landform type in a specific region shows significant topographical homogeneity under its specific regional geomorphological process. Classification accuracies are 87.3 and 86.3% for the field investigation and model validation, respectively. Spatial patterns of classified landforms and their proximity to sediment sources and other factors can be regarded as indicators of the evolutionary process of loess landform formation. 相似文献
2.
Loess terrain segmentation from digital elevation models based on the region growth method 总被引：1，自引：0，他引：1
Regional automatic segmentation – automatic terrain segmentation according to terrain features – is significant for modern geographical analysis. We propose a new approach of terrain region segmentation based on the region growth method. This method features actual runoff nodes as seed points. The corresponding growth threshold is defined based on statistical analysis of quantitative indexes of topographic features. Terrain segmentation of some regions is completed using the growth threshold. The corresponding edge boundaries of different terrain regions are extracted by image processing. Thus, the automatic segmentation of the terrain region is realized by the edge boundary. The application of the method to a typical Chinese loess landform area and automatic segmentation of three types of terrain regions – gully interfluve land, gully slope land, and gully groove land – are achieved by analyzing characteristics of the curvature structure of surface profiles. Segmentation results, compared with results of visual interpretation from a high-precision digital orthophoto map, show an average accuracy of segmentation of 93.51%. Topographic factor features of segmentation results are statistically analyzed. This study presents an effective and practical approach for segmenting terrain regions. This approach may be incorporated into the theory and method system of digital terrain analysis. 相似文献
3.
基于GIS的斜坡单元划分方法改进与实现 总被引：5，自引：0，他引：5
斜坡单元已广泛应用于滑坡易发性制图和地质灾害评价。然而在山间盆地或大型宽谷处,常规方法划分出的斜坡单元与地貌背景难以匹配。依据高程及其衍生变量的基本形态系统和曲率的流域分割原理,基于ArcGIS技术,通过叠加曲率和反转曲率的流域边界,改进了斜坡单元划分方法。结果表明：与常规方法相比,改进方法不仅能够使用山脊线和山谷线以划分斜坡单元,还能利用台地边界和宽谷边界以分割水平地表与倾斜地表;划分出的单元大小相对均匀,单元形状总体介于圆形和正三角形之间。对于水平成分较多的地区,如黄土塬区和水库库区,该方法与传统方法相比,具有较好的应用前景。 相似文献
4.
玛纳斯河流域地貌与地下水的关系 总被引：7，自引：1，他引：6
以玛纳斯河流域为例,研究地貌和地下水的特点及其关系。结果表明,水文地质单元的界线明显与地貌单元的界线一致,地下水的类型、贮存和循环方式受地貌单元的控制。形成这种现象的原因是,地貌单元内第四纪沉积物的岩性、厚度、密度和裂隙等决定了地下水的赋存状态和循环方式。 相似文献
5.
6.
7.
雅鲁藏布江河谷风沙地貌分类与发育问题 总被引：8，自引：7，他引：8
雅鲁藏布江河谷风沙地分类体系则４级２１个类型组成，其中风积地貌划分为谷底与谷坡风积地貌２个亚类。河谷风沙地貌面积１９２９．９４６ｋｍ＾２，可称为“雅鲁藏布江河谷沙地”。河谷区具有沙源，风动力和堆积场地等风沙地貌形成的基本条件。 相似文献
8.
云南东川地区层状地貌面的成因 总被引：1，自引：1，他引：1
在东川地区的山地及小江河谷的两侧山麓上部，分布着不同高度和不同规模的层状地貌面，对其成因仍有不同的认识。分歧主要表现在两个方面：一是高原隆升之前的初始地貌面是否是准平原型夷平面；二是山顶面之下的梯级层状地貌面的成因。本文从以下几个方面对上述问题进行讨论：(1)层状地貌面的地貌特征及其与侵蚀河谷体系的关系；(2)层状地貌面上堆积物的性质；(3)层状地貌面与断裂构造水平展布的关系；(4)相邻层状地貌面的空间过渡关系；(5)区域构造演化背景。作者认为在云贵高原抬升过程中，东川地区以挤压穹起隆升变形为主。不同海拔高度的层状地貌面具有多成因特性。山顶面及局部高原面是高原隆升之前古夷平面的残留。并遭到后期强烈的侵蚀改造。目前，尚缺乏足够证据证明高原隆升之前的古夷平面为准平原型夷平面。小江河谷两侧的梯级层状地貌面是侵蚀或剥蚀面，它们形成于高原隆升及初始地貌面解体之后，其梯级空间分布特征与区域性的阶段隆升有关。 相似文献
9.
Rafał Kot 《Geografisk tidskrift / udgivet af Bestyrelsen for Det Kongelige danske geografiske selskab》2018,118(1):17-35
Geomorphological diversity is part of geodiversity. Study and evaluation of geodiversity, including geomorphological diversity, is often conducted in uplands and mountains, despite the fact that lowland areas are of equal importance. This paper evaluates geomorphological diversity in a small area of the Polish Lowland, using a variety of methods that have been applied in recent times for evaluating geodiversity, and presents the results on maps. By comparing these maps and analyzing the correlation coefficients of the results obtained, it was possible to identify the two methods that were best suited to indicating areas with the greatest geomorphological diversity in the lowlands. These two methods are least affected by the choice of elementary fields and data classification methods applied. The study identified the two areas with the greatest relief diversity and showed that they distinctly differ from one another. They demonstrate the major influence of processes, not only on the topographic parameters and landform types, but above all on identifying and defining total geomorphological diversity. These methods, which can be used to identify the areas with the greatest total geomorphological diversity, could readily be used in applied studies relating to abiotic ecosystem services and landscape management. 相似文献
10.
11.
12.
《The Professional geographer》2013,65(4):379-385
Bedrock forms of etch origin result from the interaction of groundwaters and bedrock at the weathering front at the base of the regolith. They are significant for general theories of landscape and landform genesis because they are azonal with respect both to climate and lithology. Two stages of etch form development are recognized: one involves weathering and the formation of a regolith; the second consists of stripping of the regolith and the exposure of the bedrock forms. Although etch forms have been recognized for some two centuries, the concept of etching as a process of landform development has been neglected, particularly in North America. 相似文献
13.
James F. Petersen 《Geomorphology》2002,47(2-4)
Quarries and roadcuts are time-honored stopping points on geoscience field trips. Artificial exposures are good field sites for learning because of their accessibility, and the potential range of features they present for first-hand examination. On undergraduate-level field excursions, site discussions typically center on stratigraphic unit identification, correlation, depositional environments, paleontology, facies relationships, lithology, mineralogy, and/or structural features. It is rare (in my experience) for geomorphologic features and relationships to be the focus of attention, or even to receive more than passing mention. Yet, roadcuts and quarries offer much potential for learning about basic landform features, forms, and processes. This paper, with illustrated examples, discusses five general characteristics, present in artificial exposures, that offer opportunities for learning about geomorphology. (1) Roadcuts and quarries expose cross sections, not only of structure, but also of landforms, illustrating relationships between subsurface geology and the surface landscape. (2) The faces of roadcuts and quarries are anthropomorphic landforms of relatively well-known age and original form, two qualities that provide opportunities for discussing erosional modification over time. (3) These sites are generally nodes of intense geomorphic activity, useful for directly observing landform processes and their effects. The intensity of degradational and depositional processes at artificial exposures often produces (4) landform miniatures, and (5) landform analogs, both providing instructional examples or illustrations of geomorphic features. In addition to their utility to other geoscience sub-disciplines, roadcuts and quarries also offer important opportunities for students to learn about basic geomorphologic concepts, processes, and forms. 相似文献
14.
Bedrock forms of etch origin result from the interaction of groundwaters and bedrock at the weathering front at the base of the regolith. They are significant for general theories of landscape and landform genesis because they are azonal with respect both to climate and lithology. Two stages of etch form development are recognized: one involves weathering and the formation of a regolith; the second consists of stripping of the regolith and the exposure of the bedrock forms. Although etch forms have been recognized for some two centuries, the concept of etching as a process of landform development has been neglected, particularly in North America. 相似文献
15.
《地理学报(英文版)》2017,(11)
Developing approaches to automate the analysis of the massive amounts of data sent back from the Moon will generate significant benefits for the field of lunar geomorphology.In this paper,we outline an automated method for mapping lunar landforms that is based on digital terrain analysis.An iterative self-organizing(ISO)cluster unsupervised classification enables the automatic mapping of landforms via a series of input raster bands that utilize six geomorphometric parameters.These parameters divide landforms into a number of spatially extended,topographically homogeneous segments that exhibit similar terrain attributes and neighborhood properties.To illustrate the applicability of our approach,we apply it to three representative test sites on the Moon,automatically presenting our results as a thematic landform map.We also quantitatively evaluated this approach using a series of confusion matrices,achieving overall accuracies as high as 83.34% and Kappa coefficients(K)as high as 0.77.An immediate version of our algorithm can also be applied for automatically mapping large-scale lunar landforms and for the quantitative comparison of lunar surface morphologies. 相似文献
16.
Multi-scale landform characterization 总被引：4，自引：0，他引：4
One fundamental objective in geomorphometry is to extract signatures of geomorphologic processes on different spatial scales from digital terrain models (DTMs) and to describe the complexity of landforms as the synthesis of those individual imprints. We present an approach for characterizing land surfaces on multiple, spatially varying local scales. We approximate terrain surfaces locally to calculate surface derivatives at different window sizes. Local scale behaviour diagrams are used to define dominant scale ranges and multiple curvatures for each surface point. Multi-scale landform analysis leads to improved models of surface derivatives and new landform classifications, applicable in geomorphology, soil science and hydrology. 相似文献
17.
多尺度数字地貌等级分类方法 总被引：4，自引：1，他引：3
参考已出版的全国各级各类比例尺的地貌类型图的分类方案及图例表达,探讨了中国1：100 万数字地貌的等级分类方法,采用基于形态、成因、物质和年龄等地貌要素,综合反映地貌特征的等级分类指标和分类体系,初步构建了中国多个国家基本比例尺（即1：400 万、1：100 万、1：50 万、1：25 万、1：5 万）数字地貌等级分类方法,发展了由连续分布的多边形图斑反映形态成因类型,以及由离散的点、线和面图斑共同反映形态结构类型的数字地貌类型数据组织方式,构建了多尺度数字地貌类型的编码方法。该研究可为发展多尺度地貌类型图的编制提供方法基础,也可为当前正在进行的地理国情监测工程的大比例尺地貌类型信息普查提供分类规范和技术支持。 相似文献
18.
数字高程模型（DEM）在表达地貌形态、认知地表过程、揭示地学机理等研究中发挥着基础性的作用,是重要的地理空间数据模型,广泛地应用于地学分析与建模中。但是,传统DEM具有属性单一的天然缺陷,难以支撑面向地学过程与机理挖掘的地球系统科学研究。亟待在传统DEM的基础上实现其数据模型的增值,服务于新地貌学研究范式和新对地观测技术背景下的数字地形建模与分析。立足于以上问题,本文构建了DEM增值的理论框架,主要包括DEM增值的概念、内涵、内容、类别、不同增值类别之间的相互关系,以及此理论框架的研究意义和应用范畴。提出了DEM增值的构建方法,包含：① 强调地上地下一体化、时间空间相耦合的DEM空间维度和时间维度增值方法;② 重视地下、地表和地上物质构成,形态属性耦合的物质属性和形态属性增值方法;③ 顾及自然过程、人工作用的地物对象、地貌形态的地物要素和形体要素增值方法。最后,分别以数字阶地模型、数字坡地模型和数字流域模型为例,阐释DEM在面向地貌学本源问题时的不同增值方法及应用场景。期望通过对DEM进行维度、属性和要素3个层面的增值,实现现代对地观测技术背景下数字高程模型表达方法的突破,并支撑知识驱动的数字地貌问题分析。 相似文献
19.
策勒河流域荒漠类型多样,在干旱区具有典型代表性。基于Landsat5的TM遥感影像数据、数字高程模型（DEM）数据,利用GIS技术,结合野外调查、样品采集及实验室粒度、有机质、盐分分析,对策勒河流域荒漠类型分类,并编制荒漠类型分布图。据地貌类型、物质组成、植被盖度等指标将流域内荒漠分为2个一级类,7个二级类,14个三级类,建立策勒河流域荒漠类型分类系统。流域荒漠自下游向上游具有依次是沙漠、砾漠、岩漠、土漠和寒漠空间分布的规律;荒漠总面积2 416.76 km2,占流域总面积的70.45%,砾漠占荒漠总面积的45.52%,为最大一类,泥漠所占比重最小。可为流域环境保护、荒漠化防治提供依据,为其他干旱区荒漠类型研究提供参考。 相似文献
20.
地形元素（如山脊、沟谷等）是地表形态类型基本单元,通过地形元素的不同空间组合可形成更高级别的地貌类型。现有的地形元素提取方法大多依靠地形属性计算,难以克服地形元素的空间相关性表达与局部地形属性计算存在不对应的矛盾,Jasiewicz和Stepinski提出的Geomorphons方法——基于高程相对差异信息进行地形元素分类,可避免这一问题,但Geomorphons方法本质上是在单一分析尺度上选择地形特征点用于判别,易受局部地形起伏的影响而造成误分类。针对这一问题,设计出一种多分析尺度下综合判别的地形元素分类方法。应用结果表明：相比Geomorphons方法,利用该方法得到的地形元素的分类结果更为合理。 相似文献