共查询到20条相似文献，搜索用时 31 毫秒
1.
The Yangla Cu deposit is the largest Cu skarn deposit in the Jinshajiang tectonic belt. Based on the detailed observation of crosscutting relationships, three mineralization stages (i.e., pre-ore, ore and supergene) have been identified in the Yangla deposit. The pre-ore stage is dominated by prograde skarn. The ore stage is characterized by the precipitation of hydrous silicate minerals, Fe-oxides, Fe-Cu-Mo-sulfides, quartz and calcite, whose mineral assemblages were formed in the early and late sub-ore stages. The early sub-ore stage is marked by retrograde alteration with the deposition of hydrous silicate minerals (e.g., actinolite, epidote and chlorite), Fe-oxides, abundant Fe-Cu-Mo-sulfides, quartz and minor calcite. Whilst, the late sub-ore stage, associated with silicic and carbonate alteration, is represented by widespread thick quartz or calcite veins with disseminated pyrite, chalcopyrite, galena and sphalerite. We present new carbon-oxygen (C-O) isotopic compositions of the ore-hosting marble and hydrothermal calcite of this deposit. The hydrothermal calcite in the Yangla deposit was precipitated from both the early and late sub-ore stages. Calcite I from the early sub-ore stage is anhedral, and occurs as spot in the skarn or locally replaces the skarn minerals. Calcite II from the late sub-ore stage is distinguished by being coarse-grained, subhedral to euhedral and its occurrence in thick veins. Calcite I contains lower δ13CPDB (−7.0‰ to −5.0‰) and δ18OSMOW (7.2‰ to 12.7‰) than Calcite II (δ13CPDB = −4.5‰ to −2.3‰; δ18OSMOW = 10.7‰ to 19.4‰). In the δ13CPDB vs. δ18OSMOW diagram, the Calcite I and Calcite II data fall close to the igneous carbonatite field and between the fields of igneous carbonatite and marine carbonates, respectively. This suggests a dominantly magmatic origin for the early sub-ore fluids, and there might have been increasing carbonate wall rock involvement towards the late sub-ore stage. The ore-hosting marble (δ13CPDB = −4.8‰ to −0.3‰; δ18OSMOW = 10.2‰ to 23.9‰) also shows a positive δ13CPDB vs. δ18OSMOW correlation, which is interpreted to reflect the decreasing alteration intensity during the interactions between the hydrothermal fluids and ore-hosting carbonates. Simulated calculation suggests that both the Calcite I and Calcite II precipitated at 350 °C to 250 °C and 250 °C to 150 °C, respectively. We proposed that CO2 degassing and water/rock interactions were likely the two major processes that precipitated the calcite and led to the observed C-O isotopic features of the Yangla Cu deposit. 相似文献
2.
Orogenic gold mineralization in the Amalia greenstone belt is hosted by oxide facies banded iron-formation (BIF). Hydrothermal alteration of the BIF layers is characterized by chloritization, carbonatization, hematization and pyritization, and quartz-carbonate veins that cut across the layers. The alteration mineral assemblages consist of ankerite-ferroan dolomite minerals, siderite, chlorite, hematite, pyrite and subordinate amounts of arsenopyrite and chalcopyrite. Information on the physico-chemical properties of the ore-forming fluids and ambient conditions that promoted gold mineralization at Amalia were deduced from sulfur, oxygen and carbon isotopic ratios, and fluid inclusions from quartz-carbonate samples associated with the gold mineralization.Microthermometric and laser Raman analyses indicated that the ore-forming fluid was composed of low salinity H2O-CO2 composition (~3 wt% NaCl equiv.). The combination of microthermometric data and arsenopyrite-pyrite geothermometry suggest that quartz-carbonate vein formation, gold mineralization and associated alteration of the proximal BIF wall rock occurred at temperature-pressure conditions of 300 ± 30 °C and ∼2 kbar. Thermodynamic calculations at 300 °C suggest an increase in fO2 (10−32–10−30 bars) and corresponding decrease in total sulfur concentration (0.002–0.001 m) that overlapped the pyrite-hematite-magnetite boundary during gold mineralization. Although hematite in the alteration assemblage indicate oxidizing conditions at the deposit site, the calculated low fO2 values are consistent with previously determined high Fe/Fe + Mg ratios (>0.7) in associated chlorite, absence of sulfates and restricted positive δ34S values in associated pyrite. Based on the fluid composition, metal association and physico-chemical conditions reported in the current study, it is confirmed that gold in the Amalia fluid was transported as reduced bisulfide complexes (e.g., Au(HS)2−). At Amalia, gold deposition was most likely a combined effect of increase in fO2 corresponding to the magnetite-hematite buffer, and reduction in total sulfur contents due to sulfide precipitation during progressive fluid-rock interaction.The epigenetic features coupled with the isotopic compositions of the ore-forming fluid (δ34SΣS = +1.8 to +2.3‰, δ18OH2O = +6.6 to +7.9‰, and δ13CΣC = −6.0 to −7.7‰ at 300–330 °C) are consistent with an externally deep-sourced fluid of igneous signature or/and prograde metamorphism of mantle-derived rocks. 相似文献
3.
The Dongping gold deposit hosted in syenites is one of the largest hydrothermal gold deposits in China and composed of ore veins in the upper parts and altered zones in the lower parts of the ore bodies. Pervasive potassic alteration and silicification overprint the wall rocks of the ore deposit. The alteration minerals include orthoclase, microcline, perthite, quartz, sericite, epidote, calcite, hematite and pyrite, with the quartz, pyrite and hematite assemblages closely associated with gold mineralization. The phases of hydrothermal alteration include: (i) potassic alteration, (ii) potassic alteration - silicification, (iii) silicification - epidotization - hematitization, (iv) silicification - sericitization - pyritization and (v) carbonation. Mass-balance calculations in potassic altered and silicified rocks reveal the gain of K2O, Na2O, SiO2, HFSEs and transition elements (TEs) and the loss of REEs. Most major elements were affected by intense mineral reactions, and the REE patterns of the ore are consistent with those of the syenites. Gold, silver and tellurium show positive correlation and close association with silicification. Fluid inclusion homogenization temperatures in quartz veins range from 154 °C to 382 °C (peak at 275 °C–325 °C), with salinities of 4–9 wt.% NaCl equiv. At temperatures of 325 °C the fluid is estimated to have pH = 3.70–5.86, log fO2 = − 32.4 to − 28.1, with Au and Te transported as Au (HS)2− and Te22 − complexes. The ore forming fluids evolved from high pH and fO2 at moderate temperatures into moderate-low pH, low fO2 and low temperature conditions. The fineness of the precipitated native gold and the contents of the oxide minerals (e.g., magnetite and hematite) decreased, followed by precipitation of Au- and Ag-bearing tellurides. The hydrothermal system was derived from an alkaline magma and the deposit is defined as an alkaline rock-hosted hydrothermal gold deposit. 相似文献
4.
The Lermontovskoe deposit (∼48 Kt WO3; average 2.6% WO3, 0.24% Cu, 0.23 g/t Au) is situated in a W-Sn-Au metallogenic belt that formed in a collisional tectonic environment. This tungsten skarn deposit has a W-Au-As-Bi-Te-Sb signature that suggests an affinity with reduced intrusion-related Au deposits. The deposit is associated with an intrusion that is part of the ilmenite-series, high-K peraluminous granitoid (granodiorite to granite) suite. These rocks formed via mantle magma-induced melting of crustal sources.The deposit comprises reduced-type, pyroxene-dominated prograde and retrograde skarns followed by hydrosilicate (amphibole-chlorite-pyrrhotite-scheelite-quartz) and phyllic (muscovite/sericite-carbonate-albite-quartz-scheelite-sulfide, with abundant apatite) alteration assemblages. Fluid inclusions from the skarn assemblages indicate high-temperature (>500 °C), high-pressure (1400–1500 bars) and high-salinity (53–60 wt% NaCl-equiv.) magmatic-hydrothermal fluids. They were post-dated by high-carbonic, methane-dominate, low-salinity fluid at the hydrosilicate alteration stage. These fluids boiled at 360–380 °C and 1300–1400 bars. The subsequent phyllic alteration started again with a high-temperature (>450 °C), high-pressure (1000–1100 bars) and high-salinity (42–47 wt% NaCl-equiv.) fluid, with further incursion of high-carbonic, methane-dominated, low-salinity fluid that boiled at 390–420 °C and 1150–1200 bars. The latest phyllic alteration included the lower-temperature (340–360 °C), lower pressure (370–400 bars) high-carbonic, methane-dominated (but with higher CO2 fraction), low-salinity fluid, and then the low-temperature (250–300 °C) H2O-CO2-CH4-NaCl fluid, with both fluids boiled at the deposit level. The high-salinity aqueous fluids are interpreted to have come from crystallizing granitoid magma, whereas the reduced high-carbonic fluids probably came from a deeper mafic magma source. Both of these fluids potentially contributed to the W-Au-As-Bi-Te-Sb metal budget. Decreasing temperatures coupled with high aCa2+ and fluid boiling promoted scheelite deposition at all post-skarn hydrothermal stages.The deposit is characterized by limited downdip extent of mineralized zones and abundant coarse-grained muscovite-quartz (+apatite, scheelite) aggregates that formed at the phyllic alteration stage. Together with presence of high-temperature, high-pressure and high-salinity fluids directly exsolving from crystallizing magma, this suggests a root level of the mineralized magmatic-hydrothermal system of reduced W skarn deposits. 相似文献
5.
The Shapinggou porphyry Mo deposit, one of the largest Mo deposits in Asia, is located in the Dabie Orogen, Central China. Hydrothermal alteration and mineralization at Shapinggou can be divided into four stages, i.e., stage 1 ore-barren quartz veins with intense silicification, followed by stage 2 quartz-molybdenite veins associated with potassic alteration, stage 3 quartz-polymetallic sulfide veins related to phyllic alteration, and stage 4 ore-barren quartz ± calcite ± pyrite veins with weak propylitization. Hydrothermal quartz mainly contains three types of fluid inclusions, namely, two-phase liquid-rich (type I), two- or three-phase gas-rich CO2-bearing (type II) and halite-bearing (type III) inclusions. The last two types of fluid inclusions are absent in stages 1 and 4. Type I inclusions in the silicic zone (stage 1) display homogenization temperatures of 340 to 550 °C, with salinities of 7.9–16.9 wt.% NaCl equivalent. Type II and coexisting type III inclusions in the potassic zone (stage 2), which hosts the main Mo orebodies, have homogenization temperatures of 240–440 °C and 240–450 °C, with salinities of 34.1–50.9 and 0.1–7.4 wt.% NaCl equivalent, respectively. Type II and coexisting type III inclusions in the phyllic zone (stage 3) display homogenization temperatures of 250–345 °C and 220–315 °C, with salinities of 0.2–6.5 and 32.9–39.3 wt.% NaCl equivalent, respectively. Type I inclusions in the propylitization zone (stage 4) display homogenization temperatures of 170 to 330 °C, with salinities lower than 6.5 wt.% NaCl equivalent. The abundant CO2-rich and coexisting halite-bearing fluid inclusion assemblages in the potassic and phyllic zones highlight the significance of intensive fluid boiling of a NaCl–CO2–H2O system in deep environments (up to 2.3 kbar) for giant porphyry Mo mineralization. Hydrogen and oxygen isotopic compositions indicate that ore-fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials at Shapinggou are magmatic in origin. Re–Os dating of molybdenite gives a well-defined 187Re/187Os isochron with an age of 112.7 ± 1.8 Ma, suggesting a post-collisional setting. 相似文献
6.
Magnesian skarn-type tin deposits are relatively rare in the world. The Hehuaping cassiterite-sulfide deposit in southern China, having a total reserve of approximately 130,000 t of tin, 50,000 t of lead and 10,000 t of zinc, is identified as such type. The deposit is related to the Late Jurassic (157 Ma) Hehuaping medium- to coarse-grained biotite granite that intruded the Middle Devonian Qiziqiao dolomite Formation and the Tiaomajian sandstone Formation. Four paragenetic stages of skarn and ore formation have been recognized: I. prograde stage, II. retrograde stage, III. cassiterite-sulfide stage and IV. carbonate stage. Alteration zoning between fresh granite and unaltered country rocks can be identified. The skarn are typified by Mg-mineral assemblages of forsterite, spinel, diopside, tremolite, serpentine, talc, and phlogopite. The geochemistry of various skarn minerals shows a gradually decrease of Mg end member and, correspondingly, an increase of Fe- and especially Mn end members along the process of skarn alteration.Tin mineralization developed during the late retrograde stage resulted in cassiterite–magnetite-diopside skarn. However, the deposition of cassiterite occurred predominantly as cassiterite-sulfide veins along fractures and interlayer fracture zones during stage III. The petrogeochemistry of Hehuaping granite, as well as S- and Pb isotopic analyses suggest that the ore-forming elements have a magmatic source originated from the upper crust. The HO isotopic and fluid-inclusion analyses indicate that high-temperature ore-forming fluids in early anhydrous skarn stage (stage I) are also magmatic origin. In comparison, the retrograde fluids are characterized by relatively low salinity (2 to 10 wt.% NaCl equiv) and low temperature (220 to 300 °C), suggesting a mixed origin of meteoric waters with magmatic fluids. The major ore-forming stage III fluids are characterized by lower temperature (170 to 240 °C) and salinity (1 to 6 wt.% NaCl equiv), indicating fluid mixing could be an efficient tin-mineralizing mechanism. Meteoric waters are dominant in stage IV, resulting in a further lowering of temperature (130 to 200 °C) and salinity (0.4 to 1 wt.% NaCl equiv). 相似文献
7.
The Changjiang uranium ore field, which contains >10,000 tonnes of recoverable U with a grade of 0.1–0.5%, is hosted by Triassic two-mica and Jurassic biotite granites, and is one of the most important uranium ore fields in South China. The minerals associated with alteration and mineralization can be divided into two stages, namely syn-ore and post-ore. The syn-ore minerals are primarily quartz, pitchblende, hematite, hydromica, chlorite, fluorite, and pyrite; the post-ore minerals include quartz, calcite, fluorite, pyrite, and hematite. The fluid inclusions of the early syn-ore stage characteristically contain O2, and those of the late syn-ore and post-ore stage contain H2 and CH4. The fluid inclusions in quartz of the syn-ore stage include H2O, H2O–CO2, and CO2 types, and they occur in clusters or along trails. Homogenization temperatures (Th) for the H2O–CO2 and two-phase H2O inclusions range from 106 °C to >350 °C and cluster in two distinct groups for each type; salinities are lower than 10 wt% NaCl equiv. The ore-forming fluids underwent CO2 effervescence or phase separation at ∼250 °C under a pressure of 1000–1100 bar. The U/Th values of the altered granites are lowest close to the ore, increase outwards, but subsequently decrease close to unaltered granites. From the unaltered granites to the ore, the lowest Fe2O3/FeO values become lower and the highest values higher. The REE patterns of the altered granites and the ores are similar to each other. The U contents of the ores show a positive correlation with total REE contents but a negative correlation with LREE/HREE ratios, indicating the pitchblende is REE-bearing and selectively HREE-rich. The δEu values of the ore show a positive correlation with U contents, indicating the early syn-ore fluids were oxidizing. The δCe values show a negative correlation, indicating the later mineralization environment became reducing. The water–rock interactions of the early syn-ore stage resulted in oxidization of altered granites and reduction of the ore-forming fluids, and it was this reduction that led to the uranium mineralization. During alteration in the early syn-ore stage, the oxidizing fluids leached uranium from granites close to faults, and Fe2O3/FeO ratios increased in the alteration zones. The late syn-ore and post-ore alteration decreased the Fe2O3/FeO ratios in the alteration zones. The δ18OW–SMOW values of the ore-forming fluids range from −1.8‰ to 5.4‰, and the δDW–SMOW values range from −104.4‰ to −51.6‰, suggesting meteoric water. The meteoric water underwent at least two stages of water–rock interaction: the first caused the fluids to become uranium-bearing, and the second stage, which was primarily associated with ore-bearing faults, led to uranium deposition as pitchblende, accompanied by CO2 effervescence. 相似文献
8.
K. Schmidt D. Garbe-Schönberg A. Koschinsky H. Strauss C.L. Jost V. Klevenz P. Königer 《Chemical Geology》2011,280(1-2):1-18
Depending on the geological setting, the interaction of submarine hydrothermal fluids with the host rock leads to distinct energy and mass transfers between the lithosphere and the hydrosphere. The Nibelungen hydrothermal field is located at 8°18′S, about 9 km off-axis of the Mid-Atlantic Ridge (MAR). At 3000 m water depth, 372 °C hot, acidic fluids emanate directly from the bottom, without visible sulfide chimney formation. Hydrothermal fluids obtained in 2009 are characterized by low H2S concentrations (1.1 mM), a depletion of B (192 μM) relative to seawater, lower Si (13.7 mM) and Li (391 μM) concentrations relative to basaltic-hosted hydrothermal systems and a large positive Eu anomaly, and display a distinct stable isotope signature of hydrogen (?2HH2O = 7.6–8.7‰) and of oxygen (?18OH2O = 2.2–2.4‰).The heavy hydrogen isotopic signature of the Nibelungen fluids is a specific feature of ultramafic-hosted hydrothermal systems and is mainly controlled by the formation of OH-bearing alteration minerals like serpentine, brucite, and tremolite during pervasive serpentinization. New isotopic data obtained for the ultramafic-hosted Logatchev I field at 14°45′N, MAR (?2HH2O = 3.8–4.2‰) display a similar trend, being clearly distinguished from other, mafic-hosted hydrothermal systems at the MAR.The fluid geochemistry at Nibelungen kept stable since the first sampling campaign in 2006 and is evident for a hybrid alteration of mafic and ultramafic rocks in the subseafloor. Whereas the ultramafic-fingerprint parameters Si, Li, B, Eu anomaly and ?2HH2O distinguish the Nibelungen field from other hydrothermal systems venting in basaltic settings at similar physico-chemical conditions and are related to the interaction with mantle rocks, the relatively high concentrations of trace alkali elements, Pb, and Tl can only be attributed to the alteration of melt-derived gabbroic rocks. The elemental and isotopic composition of the fluid suggest a multi-step alteration sequence: (1) low- to medium-temperature alteration of gabbroic rocks, (2) pervasive serpentinization at moderate to high temperatures, and (3) limited high-temperature interaction with basaltic rocks during final ascent of the fluid. The integrated water/rock ratio for the Nibelungen hydrothermal system is about 0.5.The fluid compositional fingerprint at Nibelungen is similar to the ultramafic-hosted Logatchev I fluids with respect to key parameters. Some compositional differences can be ascribed to different alteration temperatures and other fluid pathways involving a variety of source rocks, higher water/rock ratios, and sulfide precipitation in the sub-seafloor at Logatchev I. 相似文献
9.
Zdeněk Dolníček Kamil Kropáč Pavel Uher Martin Polách 《Chemie der Erde / Geochemistry》2010,70(3):267-282
Numerous mineral veins are hosted in a body of teschenite which is situated within the Lower Cretaceous flysch siliciclastics of the Silesian Unit at Tichá. Mineralogy, fluid inclusions, stable isotopes and trace elements have been studied in order to assess the origin of this mineralization. Three stages of vein cementation have been recognized, each of them being characterized by distinct mineral composition and genetic conditions. The first stage is composed of titanite, aegirine-augite to aegirine, annite, analcime and strontian apatite. These minerals originated from NaCl-rich, CaCl2-poor magmatic brine (total fluid salinities range between 47 and 57 wt%), leaving after crystallization of host teschenite in low-pressure (<1 kbar) environment. Crystallization temperatures reached ～390–510 °C for early phases, titanite and aegirine-augite. The second stage is formed by calcite, chlorite, dolomite, siderite, strontianite, quartz, pyrite and sphalerite. The parent fluids were low-salinity (0.5–4.5 wt% NaCl eq.) aqueous solutions with low content of strong REE-complexing ligands, that were progressively cooled during mineral precipitation (up to ～190 °C at the beginning, ～90 °C at the end of crystallization). These fluids are interpreted to be predominantly of external origin, derived from surrounding sedimentary sequences during diagenetic dewatering of clay minerals. The highly positive δ18O and near-zero δ13C values indicate an interaction of fluids with sedimentary carbonates. The third stage is formed by a dense net of calcite veinlets, which probably originated during tectonic deformations connected with orogenetic movements during the Tertiary. The source of strontium for first stage mineralization was probably related to the special conditions of magmatic evolution of the host teschenite, whereas strontium for second stage minerals could have been remobilized during hydrothermal alteration from earlier teschenite-hosted mineral phases and/or limestone. 相似文献
10.
The Kahang porphyry Cu deposit, located northeast of Isfahan city in central of Iran, is associated with a composite Miocene stock and ranges in composition from diorite through granodiorite to quartz-monzonite. Field observations and petrographic studies show that the emplacement of the Kahang stock occurred in several pulses, each associated with its related hydrothermal activity. Early hydrothermal alteration started with a potassic style in the central part of the system and produced a secondary biotite–K-feldspar–magnetite assemblage accompanied by chalcopyrite and pyrite mineralization. Propylitic alteration that took place at the same time as the potassic alteration occurred in the peripheral portions of the stock. Subsequent phyllic alteration overprinted earlier potassic and propylitic alterations. Biotite grains from the potassic and phyllic zones show distinct chemical compositions. The FeO, TiO2, MnO, K2O, and Na2O concentrations in biotite from the phyllic alteration zone are lower than those from the potassic alteration zone. The F and Cl contents of biotite from the potassic alteration zone display relatively high positive correlation with the XMg. The fluorine intercept values [IV(F)] from the potassic and phyllic alteration zones are strongly correlated with the fluorine/chlorine intercept values [IV(F/Cl)]. Biotite geothermometry for the potassic and phyllic alteration zones, based on the biotite geothermometer of Beane (1974), yields a temperature range of 422° to 437 °C (mean = 430 °C) and 329° to 336 °C (mean = 333 °C), respectively. The position of data in log (XF/XOH) ratio vs. XMg and XFe diagram suggests that biotite formed under dissimilar composition and temperature conditions in the potassic and phyllic alteration zones. Calculated log fugacity ratios of (fH2O/fHF), (fH2O/fHCl), and (fHF/fHCl) show that hydrothermal fluids associated with the potassic alteration were distinctively different from those fluids associated with the phyllic alteration zone at Kahang porphyry Cu deposit. The results of this research indicate that the chemistry of biotite is related to the chemical composition of the magma and the prevailing physical conditions during crystallization. 相似文献
11.
The large (>180 Kt WO3 and at least 10–15 t Au) Vostok-2 deposit is situated in a metallogenic belt of W, Sn-W, Au, and Au-W deposits formed in late to post-collisional tectonic environment after cessation of active subduction. The deposit is related to an ilmenite-series high-K calc-alkaline plutonic suite that, by its petrologic signatures, is transitional between those at W-dominant and Au-dominant reduced intrusion-related deposits. Consistently, besides large W-Cu skarns of the reduced type, the deposit incorporates quartz stockworks with significant Au-W-Bi mineralization also formed in a reduced environment. The hydrothermal stages include prograde and retrograde, essentially pyroxene skarns, hydrosilicate (amphibole, chlorite, quartz) alteration, and phyllic (quartz, sericite, albite, apatite, and carbonate) alteration assemblages. These assemblages contain abundant scheelite associated with pyrrhotite, chalcopyrite and, at the phyllic stage, also with Bi minerals, As-Bi-Sb-Te-Pb-Zn sulfides and sulfosalts, as well as Au mineralization. The fluid evolution included hot, high-pressure (420–460 °C, 1.1–1.2 kbar), low-salinity (5.4–6.0 wt% NaCl-equiv.) aqueous fluids at the retrograde skarn stage, followed by lower temperature cyclic releases of high-carbonic, low salinity to non-carbonic moderate-salinity aqueous fluids. At the hydrosilicate stage, a high-carbonic, CH4-dominated, hot (350–380 °C) low salinity fluid was followed by cooler (300–350 °C) non-carbonic moderate-salinity (5.7–14.9 wt% NaCl-equiv.) fluid. At the phyllic stage, a high-carbonic, CO2-dominated, moderately-hot (330–355 °C, 0.9 kbar) low salinity fluid was followed by cooler (230–265 °C) non-carbonic moderate-salinity (6.6–12.0 wt% NaCl-equiv.) fluid. A homogenized magmatic source of water (δ18OH2O = +8.3 to +8.7‰), and a sedimentary source of sulfur (δ34S = −6.9 to −6.2‰) and carbon (δ13Cfluid = −20.1 to −14.9‰) at the hydrosilicate stage are suggested. A magmatic source of water (δ18O = +8.6 to +9.2‰) and a sedimentary source of sulfur (δ34S = −9.3 to −4.1‰) but a magmatic (mantle- to crustal-derived) source of carbon (δ13Cfluid = −6.9 to −5.2‰) are envisaged for fluids that formed the early mineral assemblage of the phyllic stage. Then, the role of sedimentary carbon again increased toward the intermediate (δ13Cfluid = −16.4 to −14.5‰) and late (δ13Cfluid = −16.3 to −14.7‰) phyllic mineral assemblages. The magmatic differentiation was responsible for the fluid enrichment in W, whereas Au and Bi could also have been sourced from mafic magma. The decreasing temperatures, together with elevated Ca content in non-boiling fluids, promoted scheelite deposition at the early hydrothermal stages. The most intense scheelite deposition at the phyllic stage was caused by CO2 removal due to boiling of CO2-rich fluids; further cooling of non-boiling fluids favoured joint deposition of scheelite, Bi and Au. 相似文献
12.
The Yuchiling Mo deposit, East Qinling, China, belongs to a typical porphyry Mo system associated with high-K calc-alkaline intrusions. The pure CO2 (PC), CO2-bearing (C), aqueous H2O-NaCl (W), and daughter mineral-bearing (S) fluid inclusions were observed in the hydrothermal quartz. Based on field investigations, petrographic, microthermometric and LA-ICP-MS studies of fluid inclusions, we develop a five-stage fluid evolution model to understand the ore-forming processes of the Yuchiling deposit. The earliest barren quartz ± potassic feldspar veins, developed in intensively potassic alteration, were crystallized from carbonic-dominant fluids at high temperature (> 416 °C) and high pressure (> 133 MPa). Following the barren quartz ± potassic feldspar veins are quartz-pyrite veins occasionally containing minor K-feldspar and molybdenite, which were formed by immiscible fluids at pressures of 47–159 MPa and temperatures of 360–400 °C. The fluids were characterized by high CO2 contents (approximately 8 mol%) and variable salinities, as well as the highest Mo contents that resulted in the development of quartz-molybdenite veins. The quartz-molybdenite veins, accounting for > 90% Mo in the orebody, were also formed by immiscible fluids with lower salinity and lower CO2 content of 7 mol%, at temperatures of 340–380 °C and pressures of 39–137 MPa, as constrained by fluid inclusion assemblages. After the main Mo-mineralization, the uneconomic Cu-Pb-Zn mineralization occurred, as represented by quartz-polymetallic sulfides veins consisting of pyrite, molybdenite, chalcopyrite, digenite, galena, sphalerite and quartz. The quartz-polymetallic sulfide veins were formed by fluids containing 5 mol% CO2, with minimum pressures of 32–110 MPa and temperatures of 260–300 °C. Finally, the fluids became dilute (5 wt.% NaCl equiv) and CO2-poor, which caused the formation of late barren quartz ± carbonate ± fluorite veins at 140–180 °C and 18–82 MPa.It is clear that the fluids became more dilute, CO2-poor, and less fertile, with decreasing temperature and pressure from quartz-pyrite to late barren veins. Molybdenite and other sulfides can only be observed in the middle three stages, i.e., quartz-pyrite, quartz-molybdenite and quartz-polymetallic sulfide veins. These three kinds of veins are generally hosted in potassic altered rocks with remarkable K-feldspathization, but always partly overprinted by phyllic alteration. The traditional porphyry-style potassic–phyllic–propylitic alteration zoning is not conspicuous at Yuchiling, which may be related to, and characteristic of, the CO2-rich fluids derived from the magmas generated in intercontinental collision orogens.Among the fluid inclusions at Yuchiling, only the C-type contains maximum detectable Mo that gradationally decreases from 73 ppm in quartz-pyrite veins, through 19 ppm in quartz-molybdenite veins, and to 13 ppm in quartz-polymetallic sulfide veins, coinciding well with the decreasing CO2 contents from 8 mol%, through 7 mol%, to 5 mol%, respectively. Hence it is suggested that decreasing CO2 possibly results in decreasing Mo concentration in the fluids, as well as the precipitation of molybdenite from the fluids. This direct relationship might be a common characteristic for other porphyry Mo systems in the world.The Yuchiling Mo deposit represents a new type Mo mineralization, with features of collision-related setting, high-K calc-alkaline intrusion, CO2-rich fluid, and unique wall-rock alterations characterized by strong K-feldspathization and fluoritization. 相似文献
13.
This paper contributes to the understanding of the genesis of epigenetic, hypogene BIF-hosted iron deposits situated in the eastern part of Ukrainian Shield. It presents new data from the Krivoy Rog iron mining district (Skelevatske–Magnetitove deposit, Frunze underground mine and Balka Severnaya Krasnaya outcrop) and focuses on the investigation of ore genesis through application of fluid inclusion petrography, microthermometry, Raman spectroscopy and baro-acoustic decrepitation of fluid inclusions. The study investigates inclusions preserved in quartz and magnetite associated with the low-grade iron ores (31–37% Fe) and iron-rich quartzites (38–45% Fe) of the Saksaganskaya Suite, as well as magnetite from the locally named high-grade iron ores (52–56% Fe). These high-grade ores resulted from alteration of iron quartzites in the Saksaganskiy thrust footwall (Saksaganskiy tectonic block) and were a precursor to supergene martite, high-grade ores (60–70% Fe). Based on the new data two stages of iron ore formation (metamorphic and metasomatic) are proposed.The metamorphic stage, resulting in formation of quartz veins within the low-grade iron ore and iron-rich quartzites, involved fluids of four different compositions: CO2-rich, H2O, H2O–CO2(± N2–CH4)–NaCl(± NaHCO3) and H2O–CO2(± N2–CH4)–NaCl. The salinities of these fluids were relatively low (up to 7 mass% NaCl equiv.) as these fluids were derived from dehydration and decarbonation of the BIF rocks, however the origin of the nahcolite (NaHCO3) remains unresolved. The minimum P–T conditions for the formation of these veins, inferred from microthermometry are Tmin = 219–246 °C and Pmin = 130–158 MPa. The baro-acoustic decrepitation analyses of magnetite bands indicated that the low-grade iron ore from the Skelevatske–Magnetitove deposit was metamorphosed at T = ~ 530 °C.The metasomatic stage post-dated and partially overlapped the metamorphic stage and led to the upgrade of iron quartzites to the high-grade iron ores. The genesis of these ores, which are located in the Saksaganskiy tectonic block (Saksaganskiy ore field), and the factors controlling iron ore-forming processes are highly controversial. According to the study of quartz-hosted fluid inclusions from the thrust zone the metasomatic stage involved at least three different episodes of the fluid flow, simultaneous with thrusting and deformation. During the 1st episode three types of fluids were introduced: CO2–CH4–N2(± C), CO2(± N2–CH4) and low salinity H2O–N2–CH4–NaCl (6.38–7.1 mass% NaCl equiv.). The 2nd episode included expulsion of the aqueous fluids H2O–N2–CH4–NaCl(± CO2, ± C) of moderate salinities (15.22–16.76 mass% NaCl equiv.), whereas the 3rd event involved high salinity fluids H2O–NaCl(± C) (20–35 mass% NaCl equiv.). The fluids most probably interacted with country rocks (e.g. schists) supplying them with CH4 and N2. The high salinity fluids were most likely either magmatic–hydrothermal fluids derived from the Saksaganskiy igneous body or heated basinal brines, and they may have caused pervasive leaching of Fe from metavolcanic and/or the BIF rocks. The baro-acoustic decrepitation analyses of magnetite comprising the high-grade iron ore showed formation T = ~ 430–500 °C. The fluid inclusion data suggest that the upgrade to high-grade Fe ores might be a result of the Krivoy Rog BIF alteration by multiple flows of structurally controlled, metamorphic and magmatic–hydrothermal fluids or heated basinal brines. 相似文献
14.
《Chemie der Erde / Geochemistry》2016,76(4):659-676
The Hercynian late-orogenic granites from the Gerês massif, northern Portugal, underwent intense hydrothermal activity along tectonic structures striking N-S and NE-SW. The first hydrothermal stage is characterized by the albitization of feldspars (primary K-feldspar and plagioclase) followed by the dissolution of magmatic quartz, the chloritization of biotite, and the muscovitization of magmatic biotite and feldspars and occasionally of authigenic albite. Whole-rock geochemistry shows a decrease of SiO2, K2O and Rb and an increase of Na2O, Al2O3 and Sr amounts during the albitization. The second hydrothermal stage is characterized by a mineral assemblage consisting of secondary quartz, albite, chlorite, hematite, apatite, muscovite, epidote, sphene and carbonates, which infilled the cavities produced by the early quartz leaching.Mass balance calculations demonstrate a noticeable element mobilization during the granite alteration. The average ∑REE of the Gerês granite is nearly constant at 154 ppm, but ranges from 91 to 163 ppm in the altered rocks. A relative LREE depletion and a slight HREE enrichment associated with a negative Eu anomaly characterize the feldspathization process of Gerês granite. The average ∑REE of the Carris granite is at 159 ppm but in the altered epidote + chlorite + hematite assemblage it reaches about 201 ppm with a slight HREE increase.Two different fluids were involved in the hydrothermal alteration. A first aqueous fluid (Lw1), with a low to intermediate salinity (<10 wt.% eq. NaCl) circulated along the main structures (N-S, NE-SW and NW-SE), characterized by entrapment temperature lower than 350 °C and maximum pressure of 115 MPa followed by a later colder and more saline fluid (Lw2) under a temperature of 220 °C and a pressure of about 27 MPa.Oxygen isotope data obtained on magmatic quartz indicate δ18Oquartz of + 9.3 and + 11.0‰, pointing to an interaction of magmatic fluids with others of meteoric origin. For the secondary quartz, δ18Owater of +0.5 and +0.7‰ were calculated for a temperature of 250 °C, suggesting a meteoric fluid with a possible seawater signature.The K-Ar data of K-feldspar from the altered rocks confirm an age of 273.6 ± 11.7 Ma, attributed to the first alteration process. Younger K-Ar ages between 155.8 ± 6.7 Ma and 124 ± 5.3 Ma were also obtained in the feldspathized rocks, confirming the late hydrothermal activity.Albitization and quartz dissolution of granitic rocks from the Gerês massif occurred at depths shallower than 5 km, induced by the circulation of fluids along brittle structures, during the orogenic uplift and extensional tectonics which affected the Iberian Massif in the Early Permian. A second major event is attributed to late hydrothermal circulations of aqueous brines until a depth of about 3 km, presumably derived from interaction with sub-surface evaporites throughout Late Jurassic to Early Cretaceous. These late hydrothermal events probably reflect the rifting episodes and the rising of geothermal gradient, associated with the opening of the Atlantic Ocean and Gulf of Biscay, respectively. 相似文献
15.
The Lanjiagou porphyry molybdenum deposit in western Liaoning Province, China, is hosted in fine-grained Jurassic granites. LA-ICP-MS zircon U–Pb analyses indicate that the crystallization of the ore-hosting granites took place 185.0 ± 1.8 Ma (MSWD = 1.4). Molybdenum mineralization in the deposit can be divided into three stages: the stockwork quartz vein stage, the planar quartz vein stage, and the fissure-filling quartz vein stage. Re–Os isotopic ages for the molybdenite from the stockwork quartz vein-type ores yielded an isochron age of 188.8 ± 9.9 Ma (MSWD = 3.0), while six samples from the planar quartz vein-type ores yielded a similar isochron age of 185.6 ± 1.2 Ma (MSWD = 0.5). Re–Os isotopic ages for the molybdenite identical, within error, to zircon U–Pb isotopic ages indicate that the molybdenum mineralization is related to the host intrusions. Apart from primary inorganic fluid inclusions (IFIs), a large number of primary organic fluid inclusions (OFIs) are found in the latter two stages of vein quartz, and minors found in the first stage. The components and characteristics of OFIs in the three stages of vein quartz differ from each other, which is also true for the IFIs. OFIs in stockwork vein quartz are characterized by halite-bearing inclusions, and organic liquids in the inclusions are brown and do not fluoresce under ultraviolet (UV) light. Homogenization temperatures (Th) for the primary IFIs coeval with OFIs of this stage ranges from 300 °C to > 450 °C, while the salinity varies from 10 to 53 wt.% NaCl equiv.. In planar vein quartz, OFIs are predominately two-phased (liquid and gas), and salt daughter minerals (halite) are absent. Organic liquids are light brown to colorless and show blue fluorescence under UV light; The Th range for the IFIs of this stage is 250–360 °C, and the salinity range is 3–17 wt.% NaCl equiv. Finally, OFIs in fissure-filling vein quartz are marked by liquid–gas inclusions. Organic liquids are generally colorless and show yellow fluorescence under UV light. The Th range for the primary IFIs is 180–240 °C and the salinity range is 4–11 wt.% NaCl equiv. Organic geochemical analyses indicate that organic matter in the Lanjiagou deposit was derived from mature crude oil. We suggest that large volumes of crude-oil-bearing non-magmatic fluids were flushed into the Lanjiagou porphyry hydrothermal system during all phases of ore formation and likely played important roles in mineralization. 相似文献
16.
The Luojiahe Cu deposit in the Zhongtiaoshan region is located in the southern margin of the North China Craton. The orebodies are hosted in the mafic volcanic-sedimentary sequences of the metamorphosed (greenschist-facies) Neoarchean Songjiashan Group. The Luojiahe Cu mineralization can be divided into the primary volcanogenic massive sulfide (VMS) mineralization stage (Stage I, banded or stockwork ores) and the subsequent metamorphic remobilization stage (Stage II, coarse-vein ores).Three types of quartz selected for fluid inclusion (FI) studies were collected from the Stage I banded (Q1) and stockwork (Q2) ores and Stage II coarse-vein (Q3) ores. Four types of FIs were identified: (1) liquid-rich FIs (L-type), (2) pure vapor and vapor-rich FIs (V-type), (3) daughter mineral-bearing FIs (S-type), and (4) CH4-H2O FIs (C-type). Systematical microthermometric and H-O isotopic studies show that the Stage I ore-forming fluids consist predominantly of high salinity evolved seawater (125–220 °C; 23.9–27.9 wt.% NaCl equiv.) and some magmatic-hydrothermal fluids (249–339 °C; 34.5–42.2 wt.% NaCl equiv.). The two fluid end-members are represented by the L-type FIs in Q1 and the S- and V-type FIs in Q2. The temperature- and salinity variation trends of the L-type FIs in Q1 indicate a mixing process between the hot evolved seawater and cold seawater at Stage I. Furthermore, the V- and S-type FI coexistence in Q2 and their microthermometric data suggest that fluid unmixing has occurred in original magmatic fluids at Stage I. In contrast, the Stage II ore-forming fluids consist of CH4-rich metamorphic fluids (192–350 °C; 10.6–43.2 wt.% NaCl equiv.). Carbon isotopic analysis of the Stage II calcite (− 4.58 to − 10.83‰) and graphite (− 32.01 to − 39.16‰) in the ore-hosting chlorite schist indicates that the metamorphic ore-forming fluids had exchanged carbon isotope with graphite. The generation of CH4 may have resulted from the interaction between H2O (released by metamorphic devolatilization) and graphite. The continuous consumption of H2O in the hydrothermal fluid system may have increased the fluid salinity and triggered fluid unmixing in the CH4-NaCl-H2O system. In addition, the VMS metallogenic environment is generally favorable for microbial communities. It is considered that the graphite at Luojiahe may have been derived from sedimentary organic matter formed in seafloor hydrothermal vent systems, as also supported by carbon isotopic data.We propose that at Stage I, the main mineralization may have been resulted from 1) fluid mixing of hot evolved seawater and cold seawater in the near-surface environment; and 2) fluid unmixing caused by the percolation of magmatic fluids into syn-volcanic faults, forming the stockwork ores. At Stage II, the interaction between H2O and graphite may have resulted in the reduction of ore-forming fluids and Cu precipitation, and fluid unmixing in the CH4-NaCl-H2O system may have further promoted the Cu mineralization. 相似文献
17.
Most skarn deposits are closely related to granitoids that intruded into carbonate rocks. The Cihai (>100 Mt at 45% Fe) is a deposit with mineral assemblages and hydrothermal features similar to many other typical skarn deposits of the world. However, the iron orebodies of Cihai are mainly hosted within the diabase and not in contact with carbonate rocks. In addition, some magnetite grains exhibit unusual relatively high TiO2 content. These features are not consistent with the typical skarn iron deposit. Different hydrothermal and/or magmatic processes are being actively investigated for its origin. Because of a lack of systematic studies of geology, mineral compositions, fluid inclusions, and isotopes, the genetic type, ore genesis, and hydrothermal evolution of this deposit are still poorly understood and remain controversial.The skarn mineral assemblages are the alteration products of diabase. Three main paragenetic stages of skarn formation and ore deposition have been recognized based on petrographic observations, which show a prograde skarn stage (garnet-clinopyroxene-disseminated magnetite), a retrograde skarn stage (main iron ore stage, massive magnetite-amphibole-epidote ± ilvaite), and a quartz-sulfide stage (quartz-calcite-pyrite-pyrrhotite-cobaltite).Overall, the compositions of garnet, clinpyroxene, and amphibole are consistent with those of typical skarn Fe deposits worldwide. In the disseminated ores, some magnetite grains exhibit relatively high TiO2 content (>1 wt.%), which may be inherited from the diabase protoliths. Some distinct chemical zoning in magnetite grains were observed in this study, wherein cores are enriched in Ti, and magnetite rims show a pronounced depletion in Ti. The textural and compositional data of magnetite confirm that the Cihai Fe deposit is of hydrothermal origin, rather than associated with iron rich melts as previously suggested.Fluid inclusions study reveal that, the prograde skarn (garnet and pyroxene) formed from high temperature (520–600 °C), moderate- to high-salinity (8.1–23.1 wt.% NaCl equiv, and >46 wt.% NaCl equiv) fluids. Massive iron ore and retrograde skarn assemblages (amphibole-epidote ± ilvaite) formed under hydrostatic condition after the fracturing of early skarn. Fluids in this stage had lower temperature (220°–456 °C) and salinity (8.4–16.3 wt.% NaCl equiv). Fluid inclusions in quartz-sulfide stage quartz and calcite also record similar conditions, with temperature range from 128° to 367 °C and salinity range from 0.2 to 22.9 wt.% NaCl equiv. Oxygen and hydrogen isotopic data of garnet and quartz suggest that mixing and dilution of early magmatic fluids with external fluids (e.g., meteoric waters) caused a decrease in fluid temperature and salinity in the later stages of the skarn formation and massive iron precipitation. The δ18O values of magnetite from iron ores vary between 4.1 and 8.5‰, which are similar to values reported in other skarn Fe deposits. Such values are distinct from those of other iron ore deposits such as Kiruna-type and magmatic Fe-Ti-V deposits worldwide. Taken together, these geologic, geochemical, and isotopic data confirm that Cihai is a diabase-hosted skarn deposit related to the granitoids at depth. 相似文献
18.
The Shilu deposit is a world-class Fe–Co–Cu orebody located in the Changjiang area of the western part of Hainan Island, South China. The distribution of Fe, Co, and Cu orebodies is controlled by strata of the No. 6 Formation in the Shilu Group and the Beiyi synclinorium. Based on a petrological study of the host rocks and their alteration assemblages, and textural and structural features of the ores, four mineralization stages have been identified: (1) the sedimentary ore-forming period; (2) the metamorphic ore-forming period; (3) the hydrothermal mineralization comprising the skarn and quartz–sulfide stage; and (4) the supergene period. The fluid inclusions in sedimentary quartz and/or chert indicate low temperatures (ca. 160 °C) and low salinities from 0.7 to 3.1 wt.% NaCleq, which corresponds to densities of 0.77 to 0.93 g/cm3. CO2-bearing or carbonic inclusions have been interpreted to result from regional metamorphism. Homogenization temperatures of fluid inclusions for the skarn stage have a wide range from 148 °C to 497 °C and the salinities of the fluid inclusions range from 1.2 to 22.3 wt.% NaCleq, which corresponds to densities from 0.56 to 0.94 g/cm3. Fluid inclusions of the quartz–sulfide stage yield homogenization temperatures of 151–356 °C and salinities from 0.9 to 8.1 wt.% NaCleq, which equates to fluid densities from 0.63 to 0.96 g/cm3.Sulfur isotopic compositions indicate that sulfur of the sedimentary anhydrite and Co-bearing pyrite, and the quartz–sulfide stage, was derived from seawater sulfate and thermochemical sulfate reduction of dissolved anhydrite at temperatures of 200 °C and 300 °C, respectively. H and O isotopic compositions of the skarn and quartz–sulfide stage demonstrate that the ore-forming fluids were largely derived from magmatic water, with minor inputs from metamorphic or meteoric water. The Shilu iron ore deposit has an exhalative sedimentary origin, but has been overprinted by regional deformation and metamorphism. The Shilu Co–Cu deposit has a hydrothermal origin and is temporally and genetically associated with Indosinian granitoid rocks. 相似文献
19.
The Baishan porphyry Mo deposit formed in the Middle Triassic in Eastern Tianshan, Xinjiang, northwestern China. Mo mineralization is associated with the Baishan monzogranite and granite porphyry stocks, mainly presenting as various types of hydrothermal veinlets in alerted wall rocks, with potassic, phyllic, propylitic, and fluorite alteration. The ore-forming process can be divided into four stages: stage I K-feldspar–quartz–pyrite veinlets, stage II quartz–molybdenite ± pyrite veinlets, stage III quartz–polymetallic sulfide veinlets and stage IV barren quartz–calcite veins. Four types of fluid inclusions (FIs) can be distinguished in the Baishan deposit, namely, liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), solid-bearing multi-phase (S-type) and mono-phase vapor (M-type) inclusions, but only the stage I quartz contains all types of FIs. The stages II and III quartz have three types of FIs, with exception of M-type. In stage IV quartz minerals, only the L-type inclusions can be observed. The FIs in quartz of stages I, II, III and IV are mainly homogenized at temperatures of 271–468 °C, 239–349 °C, 201–331 °C and 134–201 °C, with salinities of 2.2–11.6 wt.% NaCl equiv., 1.1–10.2 wt.% NaCl equiv., 0.5–8.9 wt.% NaCl equiv. and 0.2–5.7 wt.% NaCl equiv., respectively. The ore-forming fluids of the Baishan deposit are characterized by high temperature, moderate salinity and relatively reduced condition, belonging to a H2O–NaCl ± CH4 ± CO2 system. Hydrogen and oxygen isotopic compositions of quartz indicate that the ore-forming fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials came predominantly from a deep-seated magma source from the lower continental crust. The Mo mineralization in the Baishan deposit is estimated to have occurred at a depth of no less than 4.7 km, and the decrease in temperature and remarkable transition of the redox condition (from alkalinity to acidity) of ore-forming fluids were critical for the formation of the Baishan Mo deposit. 相似文献
20.
The Qiangma gold deposit is hosted in the > 1.9 Ga Taihua Supergroup metamorphic rocks in the Xiaoqinling terrane, Qinling Orogen, on the southern margin of the North China Craton. The mineralization can be divided as follows: quartz-pyrite veins early, quartz-polymetallic sulfide veinlets middle, and carbonate-quartz veinlets late stages, with gold being mainly introduced in the middle stage. Three types of fluid inclusions were identified based on petrography and laser Raman spectroscopy, i.e., pure carbonic, carbonic-aqueous (CO2–H2O) and aqueous inclusions.The early-stage quartz contains pure carbonic and CO2–H2O inclusions with salinities up to 12.7 wt.% NaCl equiv., bulk densities of 0.67 to 0.86 g/cm3, and homogenization temperatures of 280−365 °C. The early-stage is related to H2O–CO2 ± N2 ± CH4 fluids with isotopic signatures consistent with a metamorphic origin (δ18Owater = 3.1 to 5.2‰, δD = − 37 to − 73‰). The middle-stage quartz contains all three types of fluid inclusions, of which the CO2–H2O and aqueous inclusions yield homogenization temperatures of 249−346 °C and 230−345 °C, respectively. The CO2–H2O inclusions have salinities up to 10.9 wt.% NaCl equiv. and bulk densities of 0.70 to 0.98 g/cm3, with vapor bubbles composed of CO2 and N2. The isotopic ratios (δ18Owater = 2.2 to 3.6‰, δD = − 47 to − 79‰) suggest that the middle-stage fluids were mixed by metamorphic and meteoric fluids. In the late-stage quartz only the aqueous inclusions are observed, which have low salinities (0.9−9.9 wt.% NaCl equiv.) and low homogenization temperatures (145−223 °C). The isotopic composition (δ18Owater = − 1.9 to 0.5‰, δD = − 55 to − 66‰) indicates the late-stage fluids were mainly meteoric water.Trapping pressures estimated from CO2–H2O inclusions are 100−285 MPa for the middle stage, suggesting that gold mineralization mainly occurred at depths of 10 km. Fluid boiling and mixing caused rapid precipitation of sulfides and native Au. Through boiling and inflow of meteoric water, the ore-forming fluid system evolved from CO2-rich to CO2-poor in composition, and from metamorphic to meteoric, as indicated by decreasing δ18Owater values from early to late. The carbon, sulfur and lead isotope compositions suggest the hostrocks within the Taihua Supergroup to be a significant source of ore metals. Integrating the data obtained from the studies including regional geology, ore geology, and fluid inclusion and C–H–O–S–Pb isotope geochemistry, we conclude that the Qiangma gold deposit was an orogenic-type system formed in the tectonic transition from compression to extension during the Jurassic−Early Cretaceous continental collision between the North China and Yangtze cratons. 相似文献