共查询到20条相似文献，搜索用时 296 毫秒
1.
Mineral exploration programs commonly use a combination of geological, geophysical and remotely sensed data to detect sets of optimal conditions for potential ore deposits. Prospectivity mapping techniques can integrate and analyse these digital geological data sets to produce maps that identify where optimal conditions converge. Three prospectivity mapping techniques – weights of evidence, fuzzy logic and a combination of these two methods – were applied to a 32,000 km2 study area within the southeastern Arizona porphyry Cu district and then assessed based on their ability to identify new and existing areas of high mineral prospectivity. Validity testing revealed that the fuzzy logic method using membership values based on an exploration model identified known Cu deposits considerably better than those that relied solely on weights of evidence, and slightly better than those that used a combination of weights of evidence and fuzzy logic. This led to the selection of the prospectivity map created using the fuzzy logic method with membership values based on an exploration model. Three case study areas were identified that comprise many critical geological and geophysical characteristics favourable to hosting porphyry Cu mineralisation, but not associated with known mining or exploration activity. Detailed analysis of each case study has been performed to promote these areas as potential targets and to demonstrate the ability of prospectivity modelling techniques as useful tools in mineral exploration programs. 相似文献
2.
Previous prospectivity modelling for epithermal Au–Ag deposits in the Deseado Massif, southern Argentina, provided regional-scale prospectivity maps that were of limited help in guiding exploration activities within districts or smaller areas, because of their low level of detail. Because several districts in the Deseado Massif still need to be explored, prospectivity maps produced with higher detail would be more helpful for exploration in this region.We mapped prospectivity for low- and intermediate-sulfidation epithermal deposits (LISEDs) in the Deseado Massif at both regional and district scales, producing two different prospectivity models, one at regional scale and the other at district-scale. The models were obtained from two datasets of geological evidence layers by the weights-of-evidence (WofE) method. We used more deposits than in previous studies, and we applied the leave-one-out cross validation (LOOCV) method, which allowed using all deposits for training and validating the models. To ensure statistical robustness, the regional and district-scale models were selected amongst six combinations of geological evidence layers based on results from conditional independence tests.The regional-scale model (1000 m spatial resolution), was generated with readily available data, including a lithological layer with limited detail and accuracy, a clay alteration layer derived from a Landsat 5/7 band ratio, and a map of proximity to regional-scale structures. The district-scale model (100 m spatial resolution) was generated from evidence layers that were more detailed, accurate and diverse than the regional-scale layers. They were also more cumbersome to process and combine to cover large areas. The evidence layers included clay alteration and silica abundance derived from ASTER data, and a map of lineament densities. The use of these evidence layers was restricted to areas of favourable lithologies, which were derived from a geological map of higher detail and accuracy than the one used for the regional-scale prospectivity mapping.The two prospectivity models were compared and their suitability for prediction of the prospectivity in the district-scale area was determined. During the modelling process, the spatial association of the different types of evidence and the mineral deposits were calculated. Based on these results the relative importance of the different evidence layers could be determined. It could be inferred which type of geological evidence could potentially improve the modelling results by additional investigation and better representation.We conclude that prospectivity mapping for LISEDs at regional and district-scales were successfully carried out by using WofE and LOOCV methods. Our regional-scale prospectivity model was better than previous prospectivity models of the Deseado Massif. Our district-scale prospectivity model showed to be more effective, reliable and useful than the regional-scale model for mapping at district level. This resulted from the use of higher resolution evidential layers, higher detail and accuracy of the geological maps, and the application of ASTER data instead of Landsat ETM + data. District-scale prospectivity mapping could be further improved by: a) a more accurate determination of the age of mineralization relative to that of lithological units in the districts; b) more accurate and detailed mapping of the favourable units than what is currently available; c) a better understanding of the relationships between LISEDs and the geological evidence used in this research, in particular the relationship with hydrothermal clay alteration, and the method of detection of the clay minerals; and d) inclusion of other data layers, such as geochemistry and geophysics, that have not been used in this study. 相似文献
3.
Three-dimensional (3D) district-scale geoscience information for the Luanchuan Mo district was integrated for understanding the development of its regional geology and ore-forming processes and for decision-making about potential targets for mineral exploration. The methodology and datasets used were: (1) construction of an initial geological model (25 km × 20 km × 2.5 km) using 1:10,000 scale geological map, nine geological cross-sections and gravity and magnetic data; (2) construction of three large-scale Mo deposits model (5 km × 4 km × 2.5 km) using 1:2000 scale geological and topographic maps, 288 boreholes (total core length of 158,700 m), and 32 1:2000 scale cross-sections; (3) 3D inversion of 1:25,000 scale gravity and magnetic data for identification metallogenic anomaly zones which are associated with Jurassic intrusions; (4) extraction of ore-controlling formation and sequence of the Luanchuan Group using the large-scale 3D models of Mo deposits and results of analysis of lithogeochemical samples from outcrops and borehole cores; (5) identification of ore-forming and ore-controlling faults using the large-scale 3D model of Mo deposits and mineralized Jurassic granite porphyry stocks; (6) boost weights-of-evidence and concentration–volume (C–V) fractal analyses to integrate metallogenic information and to identify and classify potential Mo targets. Four classes of exploration targets were identified using C–V modeling and 3D known orebodies model: the first and second class targets are mainly located in three large magma-skarn type deposit camps, occupying ~ 1.4 km3 with total estimated reserve of ~ 2.3 Mt; the third class targets, which are mainly located in Huangbeiling and Yuku deposit camps comprising concealed magma-skarn type deposits, occupy ~ 2.8 km3 and represent a new target exploration zone in the Luanchuan district; the fourth class targets, which are located in the Huoshenmiao, Majuan, and Daping zones, occupy ~ 15 km3 and represent potential mineral resources with likely similar orebody features as the Yuku deposit. 相似文献
4.
The Jiama deposit, located in the eastern part of the well-known Gangdese Metallogenic Belt on the Tibetan Plateau, is the largest porphyry Cu–polymetallic system in the region, with the largest exploration budget, and is economically viable in the Gangdese Belt to undergo large-scale development. The deposit is well preserved and has experienced little erosion. The proven resources of the deposit are 7.4 Mt Cu, 0.6 Mt Mo, 1.8 Mt Pb + Zn, 6.65 Moz Au, and 360.32 Moz Ag. The results presented in this paper are based on geological and tectonic mapping, geological logging, and other exploration work performed by members of the Jiama Exploration Project Team over a period of 6 years. We propose that the Jiama porphyry Cu–polymetallic system is composed of skarn Cu–polymetallic, hornfels Cu–Mo, porphyry Mo ± Cu, and distal Au mineralization. The development of skarn Cu–polymetallic orebodies at the Jiama deposit was controlled mainly by the contact zone between porphyries and marbles, an interlayer detachment zone, and the front zone of a gliding nappe structure. The hornfels Cu–Mo and porphyry Mo ± Cu orebodies were controlled mainly by a fracture system related to intrusions, and the distal Au mineralization resulted from late-stage hydrothermal alteration.On the basis of field geological logging, optical microscopy, and chemical analysis, we verify that the alteration zones in the Jiama deposit include potassic, phyllic, propylitic, and argillic alteration, with a local lithocap, as well as endoskarn and exoskarn zones. The endoskarn occurs mainly as epidote alteration in quartz diorite porphyry and granite porphyry, and is cut by massive andradite veins. The exoskarn includes garnet–pyroxene and wollastonite skarn, in which the mineralogy and mineral chemical compositions display an outward zonation with respect to the source porphyry. From the proximal skarn to the intermediate skarn to the distal skarn, the garnet/pyroxene ratio varies from > 20:1 to ~ 10:1 to ~ 5:1, the garnet color varies from red-brown to brown-green to green-yellow, and the average composition of garnet varies from Ad80.1Gr18.9(Sp + Py)1.0 to Ad76.3Gr23(Sp + Py)0.7 to Ad59.5Gr39.5(Sp + Py)1.0, respectively. The pyroxene is not as variable in composition as the garnet, and is primarily light green to white diopside with a maximum hedenbergite content of ~ 20% and an average composition of Di88.6Hd8.9Jo2.5. From the proximal skarn to the intermediate skarn to the distal skarn, the mineralization changes from Cu–Mo to Cu ± Mo to Pb–Zn ± Cu ± Au ores, respectively. The wollastonite skarn displays no zonation and hosts mainly bornite mineralization. The Cu and Mo mineralization is closely related to the potassic and phyllic zones in the porphyry–hornfels.Zircons from four mineralized porphyries yield U–Pb ages of 15.96 ± 0.5 Ma, 15.72 ± 0.14 Ma, 15.59 ± 0.09 Ma, and 15.48 ± 0.08 Ma. The Re–Os ages of molybdenite from the skarn, hornfels, and porphyry are 15.37 ± 0.15 Ma, 14.67 ± 0.37 Ma, and 14.66 ± 0.27 Ma, respectively. The present results are consistent with the findings of previous research on fluid inclusions, isotopes, and other such aspects. On the basis of the combined evidence, we propose a porphyry Cu–polymetallic system model for the Jiama deposit and suggest a regional exploration strategy that can be applied to prospecting for porphyry-skarn mineralization in the Lhasa area. 相似文献
5.
The Early Cambrian black shale sequence of the Niutitang Formation in South China hosts a synsedimentary, organic carbon-rich, polymetallic sulfide layer with extreme metal concentrations, locally mined as polymetallic Ni–Mo–PGE–Au ore. In combination with previously reported data, we present Mo isotope, platinum-group element (PGE), and trace and rare-earth element (REE) data for the polymetallic sulfide ores and host black shales from four mine sites (Dazhuliushui and Maluhe in Guizhou Province, and Sancha and Cili in Hunan Province, respectively), several hundred kilometers apart. The polymetallic sulfide ores have consistently heavy δ98/95Mo values of 0.94 to 1.38‰ (avg. 1.13 ± 0.14‰, 1σ, n = 11), and the host black shale and phosphorite have slightly more variable δ98/95Mo values of 0.81‰ to 1.70‰ (n = 14). This latter variation is due to variable paleoenvironmental conditions from suboxic to euxinic, and partly closed-system fractionation in isolated marine sedimentary basins. Both the polymetallic sulfides and host black shales show PGE distribution patterns similar to that of present-day seawater, but different from those of ancient submarine-hydrothermal deposits and modern submarine hydrothermal fluids. The polymetallic sulfide bed has a generally consistent metal enrichment by a factor of 107 compared to present-day seawater. PAAS-normalized REE + Y patterns of the polymetallic sulfide bed are characterized by a remarkably positive Y anomaly, consistent with an origin of the REE predominantly from seawater. Small positive Eu anomalies in some of the sulfide ores could reflect minor hydrothermal components involved. The Mo isotope, PGE, and trace and rare-earth element geochemical data suggest that metals in the polymetallic Ni–Mo–PGE–Au sulfide ore layer were scavenged mostly from Early Cambrian seawater, by both in-situ precipitation and local re-deposition of sulfide clasts. 相似文献
6.
Detailed mapping, coupled with geochronological and geochemical investigations, has revealed the presence of a 1917–1913 Ma gabbro–monzodiorite–monzonite suite along the southeast margin of the Hearne Craton in northern Saskatchewan, Canada. The predominantly plutonic suite is also characterised by 1915 Ma old trachyandesitic subvolcanic and volcaniclastic inclusions. The rocks are hornblende–epidote–titanite ± augite bearing and collectively termed the Porter Bay Complex. The plutonic rocks cut the 2569 Ma Lueaza River granitoid suite, a component of the Hearne Craton and are themselves intruded by 1859 Ma pegmatitic diorite, 1856 Ma layered gabbro-anorthosite, and 1853 Ma quartz-diorite belonging to the Wathaman Batholith, one of the world's largest Paleoproterozoic Andean-type continental arcs. Wholerock major element geochemistry characterises the Porter Bay Complex as calc-alkalic to alkali-calcic, metaluminous and variable from ferroan to magnesian. Trace element concentrations are characterised by negative high field strength element anomalies, suggesting emplacement along a destructive plate margin. The geochemical signatures of the Wathaman Batholith and the Porter Bay Complex are largely identical. The geographic location, map relationships, and geochronological, geochemical and petrographic constraints are consistent with the Porter Bay Complex having formed in a subduction-related continental arc setting. The southeastern margin of the Hearne Craton was therefore a long-lived active continental margin with two separate periods of continental arc magmatism between 1.92–1.91 Ga and 1.86–1.85 Ga. 相似文献
7.
The Hahaigang W–Mo polymetallic skarn deposit is located in the central-eastern part of Gangdese tectono-magmatic belt in Lhasa terrane, Tibet. The deposit was discovered in 2007 with currently proven 46 million tons of WO3 ores, 12 million tons of Mo ores, and 1.31 million tons of combined Cu–Pb–Zn ores, at an average grade of 0.20% WO3, 0.07% Mo, 0.026% Cu, 0.49% Pb, and 3.1% Zn. Ore bodies occur in veins or disseminations, and are confined within the NE-striking Dalong fault zone which is hosted by the Lower-Permian Pangna Group of dominantly quartz sandstone and slate. Several granitic plutons are exposed in the area or known from drill-holes. Ages of these granitic plutons are determined by using zircon U–Pb LA–ICP–MS method. For example, the biotite monzogranite yields a 206Pb/238U–207Pb/238U concordia age of 58.66 ± 0.90 Ma and a weighted mean 206Pb/238U age of 57.02 ± 0.42 Ma. The granite porphyry yields a 206Pb/238U–207Pb/238U concordia age of 109.1 ± 8.9 Ma and a weighted mean 206Pb/238U age of 114.0 ± 2.6 Ma. The biotite monzogranite yields a weighted mean 206Pb/238U age of 56.1 ± 1.1 Ma. Re–Os isochron age of 63.2 ± 3.2 Ma from 5 molybdenite samples collected from the W–Mo skarn ores is also obtained in this study. The zircon U–Pb and molybdenite Re–Os geochronological data suggest that the W–Mo mineralization was not temporally associated with any of the dated igneous plutons. However, the molybdenite Re–Os age of 63.2 ± 3.2 Ma indicates that the W–Mo mineralization might have occurred during the main India–Eurasia collision that was initiated around 65 Ma. Microprobe analysis of ilvaite that occurs in two generations in the W–Mo skarn ores reveals a close relationship to Ca–Fe–F-rich hydrothermal fluids, which were probably derived from deeply-seated magmas. We suggest that ascent of the fluids was strictly controlled by the ore-controlling Dalong fault zone, and that chemical interaction and metasomatism between the fluids and the Lower-Permian Pangna quartz-feldspathic host rocks produced the ilvaite and the W–Mo polymetallic skarn deposit during the main India–Eurasia collision. Although the majority of the polymetallic deposits in the Gangdese belt are reported to be either pre- or post-main collision, it is evident from this study that the main collision also produced W–Mo polymetallic mineralization within the belt. 相似文献
8.
The Xitian tungsten–tin (W–Sn) polymetallic deposit, located in eastern Hunan Province, South China, is a recently explored region containing one of the largest W–Sn deposits in the Nanling W–Sn metallogenic province. The mineral zones in this deposit comprise skarn, greisen, structurally altered rock and quartz-vein types. The deposit is mainly hosted by Devonian dolomitic limestone at the contact with the Xitian granite complex. The Xitian granite complex consists of Indosinian (Late Triassic, 230–215 Ma) and Yanshanian (Late Jurassic–Early Cretaceous, 165–141 Ma) granites. Zircons from two samples of the Xitian granite dated using laser ablation-inductively coupled mass spectrometer (LA-ICPMS) U–Pb analysis yielded two ages of 225.6 ± 1.3 Ma and 151.8 ± 1.4 Ma, representing the emplacement ages of two episodic intrusions of the Xitian granite complex. Molybdenites separated from ore-bearing quartz-veins yielded a Re–Os isochron age of 149.7 ± 0.9 Ma, in excellent agreement with a weighted mean age of 150.3 ± 0.5 Ma. Two samples of muscovites from ore-bearing greisens yielded 40Ar/39Ar plateau ages of 149.5 ± 1.5 Ma and 149.4 ± 1.5 Ma, respectively. These isotopic ages obtained from hydrothermal minerals are slightly younger than the zircon U–Pb age of 151.8 ± 1.4 Ma of the Yanshanian granite in the Xitian area, indicating that the W–Sn mineralization is genetically related to the Late Jurassic magmatism. The Xitian deposit is a good example of the Early Yanshanian regional W–Sn ore-forming event (160–150 Ma) in the Nanling region. The relatively high Re contents (8.7 to 44.0 ppm, average of 30.5 ppm) in molybdenites suggest a mixture of mantle and crustal sources in the genesis of the ore-forming fluids and melts. Based upon previous geochemical studies of Early Yanshanian granite and regional geology, we argue that the Xitian W–Sn polymetallic deposit can be attributed to back-arc lithosphere extension in the region, which was probably triggered by the break-off of the flat-slab of the Palae-Pacific plate beneath the lithosphere. 相似文献
9.
Total organic carbon content (TOC), trace element and platinum-group element (PGE) concentrations were determined in the black shales of the Lower Cambrian Niutitang Formation in the Nayong area, Guizhou Province, South China, in order to study the polymetallic Ni–Mo–PGE mineralization. The results demonstrate that numerous elements are enriched in the polymetallic ores compared to those of the nearby black shale, particularly Ni, Mo, Zn, TOC and total PGE, which can reach up to 7.03 wt.%, 8.49 wt.%, 11.7 wt.%, 11.5 wt.% and 943 ppb, respectively. The elemental enrichment distribution patterns are similar to those in the Zunyi and Zhangjiajie areas except that the Nayong location is exceptionally enriched in Zn. Whereas positive correlations are observed between the ore elements of the polymetallic ores, no such correlations are observed in the black shale. These positively correlated metallic elements are classified into three groups: Co–Ni–Cu–PGE, Zn–Cd–Pb and Mo–Tl–TOC. The geological and geochemical features of these elements suggest that Proterozoic and Early Palaeozoic mafic and ultramafic rocks, dolomites and/or Pb–Zn deposits of the Neoproterozoic Dengying Formation and seawater could be the principal sources for Co–Ni–Cu–PGE, Zn–Cd–Pb, and Mo–Tl–TOC, respectively. Furthermore, the chondrite-normalized patterns of PGEs with Pd/Pt, Pd/Ir and Pt/Ir indicate that PGE enrichment of the polymetallic ores is most likely related to hydrothermal processes associated with the mafic rocks. In contrast, PGE enrichment in the black shale resembles that of the marine oil shale with terrigenous and seawater contributions. Our investigations of TOC, trace elements and PGE geochemistry suggest that multiple sources along with submarine hydrothermal and biological contributions might be responsible for the formation of the polymetallic Ni–Mo–PGE mineralization in the black shales of the Lower Cambrian Niutitang Formation across southern China. 相似文献
10.
The Keketale Pb–Zn deposit is located in the Devonian volcanic-sedimentary Maizi basin of the Altay orogenic belt. The mineralization at Keketale is hosted in marbles and deformed volcanic tuffs and biotite–garnet–chlorite schists, folded into a series of overturned synclines formed in multiple deformation events. Keketale contains economic amounts of Pb (0.89 Mt @ 1.51 wt.%), Zn (1.94 Mt @ 3.16 wt.%) and Ag (650 t @ 40 g/t).Detailed petrographic studies have defined two main generations of sulfide development. The banded pyrite of the early Stage A is commonly stratiform, with minor galena, sphalerite and chalcopyrite. Stage B is characterized by a large amount of polymetallic sulfides including pyrrhotite, chalcopyrite, sphalerite and galena, with minor pyrite hosted in quartz veins.Three types of fluid inclusions (FIs), including mixed carbonic-aqueous (C-type), pure carbonic (PC-type) and aqueous (W-type), have been recognized in quartz of stage B. The C-type FIs have homogenization temperatures of 150–326 °C and salinities of 0.2–16.6 wt.% NaCl equivalent. The PC-type FIs are dominated by CO2 with minor CH4 and N2 and have initial ice-melting temperatures of − 57.5 to − 56.7 °C, CO2 homogenization temperatures of 11–14.1 °C. The W-type primary FIs were completely homogenized at temperatures of 124–359 °C with salinities of 5.0–14.6 wt.% NaCl equivalent. Such CO2-rich fluid inclusions are consistent with those discovered in orogenic-type deposits in the Altay area and elsewhere.Muscovite separates from the polymetallic quartz veinlets of stage B yield a well-defined 40Ar/39Ar isotopic plateau age of 259.33 ± 2.56 Ma, with an isochron age of 259.62 ± 2.65 Ma. This age is coeval with the closure of the Paleo-Asia Ocean and reactivation of the Ertix Fault system.LA-ICP-MS analyses of two generations of pyrite indicate that the banded pyrite of stage A is relatively depleted in metallic elements and contains low contents of Cu (0.39 ppm), Ag (0.20 ppm), Au (below the detection limits), Pb (17.43 ppm) and Zn (14.38 ppm); whereas the pyrite in quartz–polymetallic sulfide veinlets of the stage B is relatively rich in metallic elements, e.g., Cu (2.56 ppm), Ag (3.07 ppm), Au (0.01 ppm), Pb (1047 ppm) and Zn (1136 ppm). The trace amounts of Cu, Pb, Zn, Au and Ag are interpreted to have been initially locked in the lattice of type-A pyrite, and then liberated and precipitated as micromineral inclusions with type-B pyrite during subsequent metamorphism and deformation.Two key factors are considered vital to the formation of economic ores of the Keketale Pb–Zn deposit, namely the original Devonian banded pyrite formed in a VMS system and subsequent Permian deformation and metamorphic processes that liberated Cu, Pb, Zn, Au and Ag from the lattice of type-A pyrite to form galena, sphalerite and chalcopyrite with minor muscovite in quartz veinlets. The model provides a new interpretation of VMS Pb–Zn deposit occurring in back-arc basin environments followed by collision, and new insights into the unique regional Fe–Cu–Pb–Zn–Au mineralization in the Altay orogenic belt. 相似文献
11.
The Nanling Range in South China is characterized by extensive Mesozoic magmatism and coeval nonferrous and rare metal mineralization. Huangshaping is a world-class Pb-Zn-W-Mo polymetallic skarn deposit in the central Nanling Range. Magmatic rocks occurring in this ore district include quartz porphyry, granite porphyry, granophyre, dacite porphyry, and aplite, with only the first three granitoids genetically associated with polymetallic mineralization. Most of the orebodies are constrained within the contact zones as skarn and veins between these granitic stocks and the carbonate wall rocks.Since the age of the quartz porphyry is still controversial, and studies of the dacite porphyry and aplite are absent, we focus on these magmatic rocks first. LA-ICP-MS zircon U-Pb dating suggests that the crystallization ages of the quartz porphyry, dacite porphyry, and aplite are 154.3 ± 1.9 Ma, 158.1 ± 0.8 Ma, and 148.4 ± 3.4 Ma, respectively. Combined with previously published age data, we infer the evolutionary sequence of magmatic rocks should be dacite porphyry → quartz porphyry → granite porphyry (granophyre) → aplite. The quartz porphyry, dacite porphyry, and aplite yield high contents of high field strength elements (Zr + Nb + Ce + Y = 255–440 ppm), high ratios of 10,000 × Ga/Al (2.6–3.2), and prominent depletions in Ba, Sr, Eu, P, and Ti, indicating their crustal affinities to A-type granites. They have negative εNd(t) values (−9.4 to −7.0) and high initial Pb isotopic ratios (206Pb/204Pbi = 18.307–18.644, 207Pb/204Pbi = 15.689–15.742, 208Pb/204Pbi = 38.589–38.986), suggesting that they were probably derived by partial melting of ancient granulitic crustal materials.The sulfide minerals exhibit a wide range of δ34SV-CDT values from −22.6 to 24.2‰, with 206Pb/204Pb of 17.669–19.708, 207Pb/204Pb of 15.492–15.714, and 208Pb/204Pb of 37.880–39.789, indicating that sulfur, lead, and other associated metals were derived from a mixture of magmatic components and the Carboniferous wall rocks. Fluid inclusions in pyrrhotite, sphalerite, and marmatite samples have 3He/4He ratios of 0.12 to 1.53 Ra, with calculated mantle helium proportions of 1.3 to 18.9%, indicating a predominantly crustal origin for the ore fluids, with minor inputs from the mantle. The Huangshaping deposit is a typical example of the genetic relationship both spatially and temporally between Jurassic magmatism and polymetallic metallogeny in the Nanling Range. 相似文献
12.
The Linghou deposit, located near Hangzhou City of Zhejiang Province, eastern China, is a medium-sized polymetallic sulfide deposit associated with granitic intrusion. This deposit is structurally and lithologically controlled and commonly characterized by ore veins or irregular ore lenses. In this deposit, two mineralization events were identified, of which the former produced the Cu–Au–Ag orebodies, while the latter formed Pb–Zn–Cu orebodies. Silicification and calc-silicate (skarn type), phyllic, and carbonate alternation are four principal types of hydrothermal alteration. The early Cu–Au–Ag and late Pb–Zn–Cu mineralizations are characterized by quartz ± sericite + pyrite + chalcopyrite + bornite ± Au–Ag minerals ± magnetite ± molybdenite and calcite + dolomite + sphalerite + pyrite + chalcopyrite + galena, respectively. Calcite clusters and calcite ± quartz vein are formed during the late hydrothermal stage.The NaCl–H2O–CO2 system fluid, coexisting with NaCl–H2O system fluid and showing the similar homogenization temperatures (385 °C and 356 °C, respectively) and different salinities (16.89–21.68 wt.% NaCl eqv. and 7.70–15.53 wt.% NaCl eqv.), suggests that fluid immiscibility occurred during the Cu–Au–Ag mineralization stage and might have given rise to the ore-metal precipitation. The ore-forming fluid of the Pb–Zn–Cu mineralization mainly belongs to the NaCl–H2O–CO2 system of high temperature (~ 401 °C) and mid-high salinity (10.79 wt.% NaCl eqv.).Fluids trapped in the quartz-chalcopyrite vein, Cu–Au–Ag ores, Pb–Zn–Cu ores and calcite clusters yielded δ18OH2O and δD values varying from 5.54‰ to 13.11‰ and from − 71.8‰ to − 105.1‰, respectively, indicating that magmatic fluids may have played an important role in two mineralization events. The δ13CPDB values of the calcite change from − 2.78‰ to − 4.63‰, indicating that the CO32 − or CO2 in the ore-forming fluid of the Pb–Zn–Cu mineralization was mainly sourced from the magmatic system, although dissolution of minor marine carbonate may have also occurred during the ore-forming processes. The sulfide minerals have homogeneous lead isotopic compositions with 206Pb/204Pb ranging from 17.958 to 18.587, 207Pb/204Pb ranging from 15.549 to 15.701, and 208Pb/204Pb ranging from 37.976 to 39.052, indicating that metallic elements of the Linghou deposit came from a mixed source involving mantle and crustal components.Based on geological evidence, fluid inclusions, and H–O–C–S–Pb isotopic data, the Linghou polymetallic deposit is interpreted as a high-temperature, skarn-carbonate replacement type. Two types of mineralization are both related to the magmatic–hydrothermal system, with the Cu–Au–Ag mineralization having a close relationship with granodiorite. 相似文献
13.
The Gejiu tin-polymetallic deposits in the Western Cathaysia Block of South China comprise the world's largest primary tin district, with a total resource of approximately 300 million metric ton ores, at an average grade of 1 wt percent Sn. Tin polymetallic mineralization occurs in five deposits and has four ore types, i.e., greisen, skarn, stratabound cassiterite-sulfide (mostly oxidized) and vein type ore. In each deposit the orebodies typically occur in an extensive hydrothermal system centered on a shallow Late Cretaceous granitoid cupola. Metal zoning is well developed both vertically and horizontally over the entire district, from W + Be + Bi ± Mo ± Sn ores inside granite intrusions, to Sn + Cu-dominated ores at intrusion margins and farther out to Pb + Zn deposits in the surrounding host carbonate. This zoning pattern is similar to that of other hydrothermal deposits in other parts of the world, indicating a close genetic relationship between magmatism and mineralization. In this paper, we dated thirteen mica samples from all types of mineralization and from the five deposits in the Gejiu district. The ages range from 77.4 ± 0.6 Ma to 95.3 ± 0.7 Ma and are similar to the existing zircon U–Pb age of the granitic intrusions (77.4 ± 2.5–85.8 ± 0.6), indicating a genetic relationship between the mineralization and the intrusions. Geological characteristics, metal zoning patterns and new geochronological data all indicate that the tin-polymetallic ores in the Gejiu district are hydrothermal in origin and are genetically related to the nearby granitic intrusions. It is unlikely that the deposits are syngenetic, as has been proposed in recent years. 相似文献
14.
This paper presents a reconstruction of the Holocene paleo-environment in the central part of Bangladesh in relation to relative sea-level changes 200 km north of the present coastline. Lithofacies characteristics, mangal peat, diatoms and paleophysiographical evidence were considered to reconstruct the past position and C-14 ages were used to determine the time of formation of the relative sea level during the Holocene. With standard reference datum, the required m.s.l. at the surface of five sections was calculated. The relative sea-level (RSL) curve suggests that Bangladesh experienced two mid-Holocene RSL transgressions punctuated by regressions. The curve shows an RSL highstand at approximately 7500 cal BP, although the height of this highstand could not be determined because the transgressive phase was observed in a bioturbated sand flat facies. The curve shows a regression of approximately 6500 cal BP, and the RSL was considerably lower, perhaps 1–2 m, than the present m.s.l. The abundant marine diatoms and mangrove pollens indicate the highest RSL transgression in Bangladesh at approximately 6000 cal BP, being at least 4.5 to 5 m higher than the modern m.s.l. After this phase, the relative sea level started to fall, and consequently, a freshwater peat developed at approximately 5980–5700 cal BP. The abundant mangrove pollens in the salt-marsh succession shows the regression at approximately 5500 cal BP, when it was 1–2 m higher than the modern sea level. The curve indicates that at approximately 5000 cal BP and onwards, the RSL started to fall towards its present position, and the present shoreline of Bangladesh was established at approximately 1500 cal BP and has not noticeably migrated inland since. 相似文献
15.
《Journal of African Earth Sciences》2011,59(5):820-828
The shear velocity structure beneath the Virunga volcanic area was estimated by using an average solution in the time domain inversion of stacked teleseismic receiver functions provided by two seismic broadband stations KUNENE (KNN) and KIBUMBA (KBB). These two stations are 29 km apart and located at the eastern and western escarpment of the Western Rift Valley of Africa in the Virunga area, respectively. The velocity model was presented as P-wave velocity models. From these models, the crust mantle transition zone beneath the area sampled by KNN and KBB in the Virunga area was determined at depth from about 36 to 39 km and 30 to 41 km, respectively. A low velocity zone was observed below stations KNN and KBB at depths between 20–30 km and 18–28 km, respectively, and with average velocity 5.9 km/s and 6.0 km/s. This low velocity zone may probably related to a magma chamber or a melt-rich sill. The models show also high velocity material (6.8–7.4 km/s) lying beneath stations KNN and KBB at depths 3–20 km and 3–10 km, respectively, which is indicative of magma cumulates within the volcanic edifice. The result obtained in this study was applied to the determination of epicentres during the period prior to the 27 November 2006 Nyamuragira eruption. This eruption was preceded by a swarm of hybrid volcanic earthquakes with clear P-waves onset. Using the receiver function model was found to improve the location of events. The located events correlate well with the location of the eruptive site and data provided by the INSAR observations of surface deformation associated with eruption. 相似文献
16.
The Beiya gold–polymetallic deposit, located in the middle of the Jinshajiang–Ailaoshan alkaline porphyry metallogenic belt, is one of the largest gold deposits in China. The mineralization mainly occurs in skarn along the intrusive contacts between the alkaline porphyries and Middle Triassic limestone. In this paper, we present U–Pb age as well as major and trace element geochemistry of titanite from the Beiya deposit, and distinguish the titanite into a magmatic- and a hydrothermal suite. Our study indicates that the titanite from the ore-related porphyry and from the mineralized skarn is texturally and geochemically very different. The euhedral, envelope-shaped titanite from the ore-related porphyry has lower FeO, F, HFSEs, Nb/Ta and Lu/Hf, together with higher TiO2 and Th/U than the subhedral titanite from the mineralized skarn. The titanite from the porphyry also displays higher LREE/HREE and more subtle negative Eu anomaly than its mineralized skarn counterpart. This suggests a magmatic- and a hydrothermal origin for, respectively, the titanite from the ore-related porphyry and from the mineralized skarn. In-situ magmatic titanite U–Pb dating has yielded an Eocene age of 36.0 ± 5.9 Ma, consistent with the porphyry zircon U–Pb age (36.07 ± 0.43 Ma) obtained in previous studies. Hydrothermal titanite has yielded a weighted average 206Pb/238U age of 33.1 ± 1.0 Ma (MSWD = 2.0), which represents the age of the retrograde skarn alteration and the maximum age for the gold mineralization. Together with the previous molybdenite Re–Os age, we have further constrained the Beiya gold–polymetallic metallogeny to 33.1–34.1 Ma. The mineralization age is slightly younger than the porphyry emplacement, indicating that the Beiya metallogeny was likely to be a post-magmatic hydrothermal product of the Himalayan orogenic event. The REE characteristics of hydrothermal titanite also reveal that the ore forming fluids may have been derived from a highly oxidized magma. 相似文献
17.
The Cihai iron skarn deposit is located in the southern part of the eastern Tianshan, Xinjiang, northwestern China. The major iron orebodies are banded and nearly parallel to each other. The iron ores are hosted in an early diabase dike and in skarn. Post-ore diabase dikes cut the iron ores and their hosting diabase. Hydrothermal activity can be divided into four stages based on geological and petrographic observations: initial K–Na alteration (stage I), skarn-minor magnetite event (II), retrograde skarn-magnetite main ore event (III), and quartz–calcite–sulfide veining (IV). Zircon U–Pb dating yields ages of 286.5 ± 1.8 Ma for early diabase and 275.8 ± 2.2 Ma for post-ore diabase dikes. Amphibole separated from massive magnetite ore gives a 40Ar–39Ar plateau age of 281.9 ± 2.2 Ma and is the time of ore formation. Formation of the Cihai iron deposit is closely related to post-collisional magmatism and associated Cu–Ni–Au polymetallic mineralization in the eastern Tianshan. 相似文献
18.
The Beiya gold–polymetallic orefield, with gold reserves of 305 t, is one of the most representative porphyry-skarn orefields in the Jinshajiang–Ailaoshan Cu–Au ore belt within the Sanjiang region of southwest China. The orefield contains seven deposits: the Wandongshan, Hongnitang, Dashadi, Bijiashan, Weiganpo, Matouwan, and Bailiancun deposits. In this paper we report on the geochemistry and geochronology of porphyries associated with mineralization from the seven deposits. The results show that all the porphyries have similar geochemistry, with high alkalinity, high contents of SiO2, Al2O3, K2O, and Sr, high K2O/Na2O ratios, low MgO, Y, and Yb contents, enrichments in Ba, K, and Pb, depletions in P, Ti, Nb, and Ta, and non-evident to weak Eu depletions (δEu = 0.42–0.99). In the SiO2 vs. Th/Ce diagram, the porphyry samples are distributed in the area of thickened lower crust, and in the Sr/Y vs. Y and La/Yb vs. Yb diagrams, the porphyries broadly followed the batch-melting trend of amphibolite containing up to 10% garnet. LA-MC-ICP-MS zircon U–Pb dating analysis suggests that the porphyries were emplaced between 34.62 ± 0.25 and 36.72 ± 0.25 Ma. They were coeval with lamprophyres (34 to 36 Ma) in the Beiya area and with potassic–ultrapotassic intrusive rocks (40 to 35 Ma) within the Jinshajiang–Ailaoshan magmatic belt, indicating possible genetic relation between these rock types. We suggest that the porphyries in the Beiya gold–polymetallic orefield were derived from the partial melting of a K-rich mafic source in the thickened lower crust, with the melting triggered by asthenospheric upwelling following the removal of lower lithospheric mantle. 相似文献
19.
An integrated interpretation of multi-channel seismic reflection, gravity and magnetic datasets belonging to northern most part of the 85°E Ridge in the Mahanadi offshore is carried out to study the crustal structure and mode of its emplacement. The basement structure map of the ridge reveals that it is 130–150 km wide and is composed of an eastern high which appears as a continuous, broad and smooth topographyand the western high characterized by several steep isolated highs. The seismic velocities reported for the first time over the ridge indicate several sedimentary sequences ranging in velocities between 1.6 and 4.0 km/s above the acoustic basement top. The salient aspects of the sedimentary velocities are; a low velocity layer (2.6–3.2 km/s) within the Cretaceous sequence in the intervening depressions encompassing the flank region, and a regionally widespread higher velocity layer (3.5–3.8 km/s) belonging to the Eocene–Oligocene section overlying the ridge. A layer having a velocity of 4.2–4.7 km/s probably made of volcanoclastic rocks is observed immediately below the acoustic basement. The sediment isopach maps presented here for three major horizons are used to compute the 3-D sediment gravity effect to obtain a crustal Bouguer anomaly map of the region. Detailed analysis of the gravity and magnetic anomaly maps clearly demonstrates the continuity of ridge up to the Mahanadi coast at Chilka Lake. Seismically constrained gravity and magnetic models indicate that the ridge is composed of volcanic material that was emplaced on continental crust in the shelf-slope areas and over the oceanic crust in the deep offshore areas. The modeled crustal structure below the ridge further indicates volcanic emplacement of the ridge on a relatively younger lithosphere. We propose two alternative models for the emplacement of the ridge. 相似文献
20.
Daojun Zhang Frits Agterberg Qiuming Cheng Renguang Zuo 《Mathematical Geosciences》2014,46(7):869-885
Weights of evidence and logistic regression are two of the most popular methods for mapping mineral prospectivity. The logistic regression model always produces unbiased estimates, whether or not the evidence variables are conditionally independent with respect to the target variable, while the weights of evidence model features an easy to explain and implement modeling process. It has been shown that there exists a model combining weights of evidence and logistic regression that has both of these advantages. In this study, three models consisting of modified fuzzy weights of evidence, fuzzy weights of evidence, and logistic regression are compared with each other for mapping mineral prospectivity. The modified fuzzy weights of the evidence model retains the advantages of both the fuzzy weights of the evidence model and the logistic regression model; the advantages being (1) the predicted number of deposits estimated by the modified fuzzy weights of evidence model is nearly equal to that of the logistic regression model, and (2) it can deal with missing data. This method is shown to be an effective tool for mapping iron prospectivity in Fujian Province, China. 相似文献