首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
 The palaeotemperature distribution in the transition from diagenesis to metamorphism in the western nappes of the Cantabrian Zone (Somiedo, La Sobia and Aramo Units) are analysed by conodont colour alteration index (CAI) and illite crystallinity (IC). Structural and stratigraphic control in distribution of CAI and IC values is observed. Both CAI and IC value distributions show that anchizonal conditions are reached in the lower part of the Somiedo Unit. A disruption of the thermal trend by basal thrusts is evidenced by CAI and IC values. There is an apparent discrepancy between the IC and CAI values in Carboniferous rocks of the Aramo Unit; the IC has mainly anchizonal values, whereas the CAI has diagenetic values. Discrepant IC values are explained as a feature inherited from the source area. In the Carboniferous rocks of the La Sobia Unit, both IC and CAI indicate diagenetic conditions. The anchimetamorphism predated completion of emplacement of the major nappes; it probably developed previously and/or during the early stages of motion of the units. Temperature probably decreased when the metamorphosed zones of the sheets rose along ramps and were intensely eroded. In the context of the Iberian Variscan belt, influence of tectonic factors on the metamorphism is greater in the internal parts, where the strain and cleavage are always present, than in the external parts (Cantabrian Zone), where brittle deformation and rock translation are dominant, with an increasing role of the burial on the metamorphism. Received: 11 May 1998 / Accepted: 19 January 1999  相似文献   

2.
The conodont colour alteration index (CAI) is potentially valuable in thermal history investigations, but there are problems in its use. An approach is proposed herein to overcome the problem of establishing reliable geothermal palaeogradients in areas with burial metamorphism, based on knowledge of the stratigraphic succession thickness, the boundaries of chronostratigraphic units, and the age and duration of deformation episodes. Although also problematical that a correlation between CAI and Kübler index (KI) values does not exist, there are areas where CAI and KI values are notably consistent for the anchizone boundaries; however, anomalous correlations between CAI and KI values have also been found in some areas. A CAI anchizone (or ancaizone) is defined in order to enable CAI values to be used independently to establish a metamorphic zonation.  相似文献   

3.
The Rhine Rift System (RRS) forms part of the European Cenozoic Rift System (ECRIS) and transects the Variscan Orogen, Permo-Carboniferous troughs and Late Permian to Mesozoic thermal sag basins. Crustal and lithospheric thicknesses range in the RRS area between 24–36 km and 50–120 km, respectively. We discuss processes controlling the transformation of the orogenically destabilised Variscan lithosphere into an end-Mesozoic stabilised cratonic lithosphere, as well as its renewed destabilisation during the Cenozoic development of ECRIS. By end-Westphalian times, the major sutures of the Variscan Orogen were associated with 45–60 km deep crustal roots. During the Stephanian-Early Permian, regional exhumation of the Variscides was controlled by their wrench deformation, detachment of subducted lithospheric slabs, asthenospheric upwelling and thermal thinning of the mantle-lithosphere. By late Early Permian times, when asthenospheric temperatures returned to ambient levels, lithospheric thicknesses ranged between 40 km and 80 km, whilst the thickness of the crust was reduced to 28–35 km in response to its regional erosional and local tectonic unroofing and the interaction of mantle-derived melts with its basal parts. Re-equilibration of the lithosphere-asthenosphere system governed the subsidence of Late Permian-Mesozoic thermal sag basins that covered much of the RRS area. By end-Cretaceous times, lithospheric thicknesses had increased to 100–120 km. Paleocene mantle plumes caused renewed thermal weakening of the lithosphere. Starting in the late Eocene, ECRIS evolved in the Pyrenean and Alpine foreland by passive rifting under a collision-related north-directed compressional stress field. Following end-Oligocene consolidation of the Pyrenees, west- and northwest-directed stresses originating in the Alps controlled further development of ECRIS. The RRS remained active until the Present, whilst the southern branch of ECRIS aborted in the early Miocene. Extensional strain across ECRIS amounts to some 7 km. Plume-related thermal thinning of the lithosphere underlies uplift of the Rhenish Massif and Massif Central. Lithospheric folding controlled uplift of the Vosges-Black Forest Arch.  相似文献   

4.
Abstract Eclogites with a wide range in bulk composition are present in the Münchberg Massif, part of the Variscan basement of the Bohemian Massif in north-east Bavaria. New analyses of the primary phases garnet, omphacite, phengite and amphibole, as well as the secondary phases clinopyroxene II, various amphiboles, biotite/phlogopite, plagioclase, margarite, paragonite, prehnite and pumpellyite, reveal a complex uplift history. New discoveries were made of samples with very jadeite-rich primary omphacite as well as a secondary omphacite in a symplectite with albite. Various geothermobarometric techniques, together with thermodynamic databases (incorporating separately determined activity–composition values) and experimental data have clustered the minimum conditions for the primary assemblages to the P–T range 650 ± 60° C, 14.3 ± 1 kbar. However, jadeite (in omphacite)–kyanite–paragonite (in phengite) and zoisite–grossular (in garnet)–kyanite–quartz relationships suggests pressures of 25–28 kbar at the same temperatures. The fact that the secondary omphacite–plagioclase assemblage yields pressures within a few hundred bars of the minimum pressures for the plagioclase-free assemblages strongly suggests that the minimum values are serious underestimates.
Zoning, inclusion suites and breakdown reactions of primary phases, in addition to new minerals formed during uplift, define a polyphase metamorphic evolution which, from geochronological evidence, occurred solely within the Variscan cycle. The complex breakdown in other Bohemian Massif eclogites and the distinct variation in their temperatures during uplift suggest a multi-stage thrusting model for the regional evolution of the eclogites. Such an evolution has significance with respect to incorporation of mantle slices into crustal sequences and fluid derivation from successively subducted units, possibly driving the breakdown reactions.  相似文献   

5.
A range of colour alteration index (CAI) values between 3.0 and 6.0 is recorded for conodont elements recovered from the Arundian to Brigantian (Dinantian, Lower Carboniferous) sequence around Castletown, Isle of Man. Mantle-derived heat, channelled through the Caledonian South Barrule pluton, is proposed as the major cause of these elevated values. A lower CAI of 2.5 is obtained from elements recovered from a borehole sunk into the concealed Namurian (Upper Carboniferous) deposits near Shellag Point; the Glen Mona pluton acted as the medium for mantle-derived heat in this instance. The CAI values which may have been established during a late Dinantian volcanic episode around Castletown were overprinted by the greater effects of heat emanating from the South Barrule pluton. The record of CAI 6.0 for a sample taken from the immediate vicinity of a dyke indicates a high level of very localized CAI elevation in the early Tertiary.  相似文献   

6.

Kimberlite pipes from Chidliak, Baffin Island, Nunavut, Canada host surface-derived Paleozoic carbonate xenoliths containing conodonts. Conodonts are phosphatic marine microfossils that experience progressive, cumulative and irreversible colour changes upon heating that are experimentally calibrated as a conodont colour alteration index (CAI). CAI values permit us to estimate the temperatures to which conodont-bearing rocks have been heated. Conodonts have been recovered from 118 samples from 89 carbonate xenoliths collected from 12 of the pipes and CAI values within individual carbonate xenoliths show four types of CAI distributions: (1) CAI values that are uniform throughout the xenolith; (2) lower CAIs in core of a xenolith than the rim; (3) CAIs that increase from one side of the xenolith to the other; and, (4) in one xenolith, higher CAIs in the xenolith core than at the rim. We have used thermal models for post-emplacement conductive cooling of kimberlite pipes and synchronous heating of conodont-bearing xenoliths to establish the temperature–time history of individual xenoliths within the kimberlite bodies. Model results suggest that the time-spans for xenoliths to reach the peak temperatures recorded by CAIs varies from hours for the smallest xenoliths to 2 or 3 years for the largest xenoliths. The thermal modelling shows the first three CAI patterns to be consistent with in situ conductive heating of the xenoliths coupled to the cooling host kimberlite. The fourth pattern remains an anomaly.

  相似文献   

7.
Organic maturation patterns in the Lower Carboniferous of Ireland have been determined from conodont colour alteration indices (CAI) for some 750 localities. Onshore Ireland conodonts record increasing maturation in the Carboniferous rocks from the oil-window rocks of the north-east, southwards to the greenschist meta-argillite regime of the Munster Basin. In detail the Caledonoid trend has a marked influence in the Midlands, whilst in the south sharp variations in CAI are interpreted as being caused by thrusting of the Variscan Orogeny. In the south-east low maturities in the Wexford Half-graben indicate that the region was shielded from orogenic stresses, probably by the Leinster Massif. Igneous centres such as the Carlingford Complex and Croghan Hill produce local sites of increased palaeotemperature. Significant CAI variations have also been noted in proximity to major base-metal orebodies. The CAI results highlight north-east Ireland and the Wexford Half-Graben as areas with hydrocarbon potential.  相似文献   

8.
The middle and eastern parts of the Northern Calcareous Alps (NCA) can be subdivided into two distinct units with a lateral boundary marked by abrupt changes in the conodont colour alteration index (CAI-values). The first of these is a northern unit (Tirolikum) with a relatively homogeneous distribution of no or low grade conodont alteration (CAI 1.0–2.0). The thermal overprint is thought to be relatively young and related to a heat flow from the Tauern crystallization. The second unit consists of the Juvavic nappe system (Juvavikum), which is distributed along the southern rim of the NCA but also covers some of the northern parts of the Tirolikum. With respect to its CAI-distribution the Juvavikum is more heterogeneous on a regional and local scale, with some local CAI-inversions. The Juvavikum additionally shows distinctly different sets of CAI-values one with weak (CAI 1.0–1.5) and another with strong alteration (CAI 5.5–7.0) — at present the highest known thermal overprint measured in the NCA. The metamorphism is relatively old as it predates the Late Jurassic—Early Cretaceous gravity tectonic emplacement of the Juvavikum onto the Tirolikum. The high CAI-values of parts of the Juvavic nappe system are though to be related to tectonic burial in an accretionary wedge formed parallel to the closure of the Vardar Ocean. The low CAI values of the Tirolikum apparently exclude a direct juxtaposition of the two units at the time of metamorphism.  相似文献   

9.
Conodont colour alteration index (CAI) data in Upper Ordovician rocks from several areas of the Variscan domain in the Iberian Peninsula indicate conditions ranging from diagenesis to low-grade metamorphism. In most of the areas, where studies using other indicators, such as illite crystallinity (IC) or where vitrinite reflectance are lacking, the CAI method has permitted a preliminary estimation of the metamorphic grade. In the Almadén syncline (Central-Iberian Zone), where IC studies are available, the thermal conditions inferred from CAI data agree with those obtained by the IC method. In the Puertollano–Almuradiel syncline, the thermal interval obtained primarily from fluid inclusions (270–370°C) overlaps considerably with that obtained from CAI data (180–340°C). In general, cleavage in rocks is present in anchizonal or epizonal conditions, whereas in diagenetic conditions with CAI 2.5, cleavage is scarce. The conodont texture changes with increasing metamorphism, and apatite recrystallisation appears in general with CAI 5. Variation of CAI values within a single sample and/or within short stratigraphic distances observed at several localities is due to hydrothermal activity.  相似文献   

10.
《Comptes Rendus Geoscience》2018,350(6):289-298
Because of its location in the boundary zone between the Anti-Atlas and the Atlas–Meseta crustal domains of Morocco, the Mougueur Paleozoic Massif is a key area to decipher the evolution of the Gondwana NW margin during the Paleozoic. In this work, we report for the first time the occurrence of Hirnantian sandstones, Silurian (Gorstian) graptolitic shales and probable Lower Devonian turbidites in the Massif. Comparison of our observations with regional stratigraphic data from literature allows us to suggest that the area was included in the distal part of the West African Craton passive margin during Cambrian-Devonian times.  相似文献   

11.
The paleogeography during Early Cretaceous of the northern margin of the Ligurian Tethys is poorly constrained because of deformation and erosion during Pyrenean and Alpine orogenic phases. The present-day limit between Lower Cretaceous sediments in the South–East basin, located at the northwestern margin of the Ligurian Tethys, and basement rocks is the consequence of a protracted erosion history. Lower Cretaceous sediments observed today in the basin, even close to the present-day outcropping border, are characteristic of pelagic environments. A larger extent of a Lower Cretaceous cover on the basement must then be considered. This study focuses on the western part of this margin (the Causses basin), in the South of the Massif Central (France), using several thermochronometers and geothermometers to decipher the former extent of the sedimentary cover. Apatite fission track thermochronology on basement rocks surrounding the Causses basin suggests that these rocks cooled from temperatures higher than 110°C during the mid-Cretaceous. Average fluid inclusion homogenisation temperatures between 94°C and 108°C are recorded in calcite veins from outcropping Toarcian and Aalenian shales. In the shales, Tmax values, temperature obtained by Rock–Eval pyrolysis of organic matter, are in agreement with these elevated temperatures. Different explanations for these relatively high temperatures, which cannot be explained by the present-day sedimentary serie in the basin, have been tested using a 1D thermal modelling procedure (Genex). For a 95±10-mW/m2 paleoflux, thick sedimentary deposits (2.5±0.3 km) including 1.3±0.3 km of Lower Cretaceous sediments cover the South of the Massif Central; these formations have been subsequently eroded from mid-Cretaceous time onwards. This study confirms that the South of the Massif Central was a site of marine sedimentation during the Early Cretaceous where a thick sedimentary sequence was once deposited.  相似文献   

12.
Geological mapping coupled with structural investigations carried out in the Voltri Massif (eastern Ligurian Alps, Italy) provide new data for the interpretation of the tectonic context controlling main fabric development during exhumation of its high-pressure core. The Voltri Massif is here interpreted as a c. 30 km-long eclogite-bearing, asymmetric dome formed by the progressive verticalisation of the regional, second-phase mylonitic foliation developed during retrogressive greenschist metamorphic conditions. In this light, the exhumation history is driven by a ductile-to-brittle extensional process, operating through low-angle, top-to-the-W multiple detachment systems. A Late Eocene–Early Oligocene age for this extensional episode is proposed on the basis of structural correlations, stratigraphic and radiometric constraints. In this scenario, the Voltri Massif is interpreted as an extensional domain developed to accommodate the Late Eocene–Early Oligocene arching of the Western Alps–Northern Apennines orogenic system.  相似文献   

13.
The thermal and burial history of the Herzkamp syncline, located in the transition zone between the Variscan Rhenish Massif and the Ruhr foreland basin (western Germany), was reconstructed using PDI/PC-1D-basin modelling software (IES). The models were calibrated with new vitrinite reflectance data measured on Palaeozoic outcrop samples. High sample density and quality of the calibration data allowed a 3D reconstruction of the heat flow as well as of burial and erosion history. Vitrinite reflectance values range from 0.8 to 4.9%Rr and generally increase with increasing stratigraphic age. The coalification pattern confirms pre-tectonic maturation, especially in the western part of the study area. A "low-coalification zone" showing stagnating/decreasing coalification with increasing stratigraphic age exists, however, northeast of the Ennepe thrust, indicating synorogenic coalification. This anomaly is explained by early thrusting in the northern Rhenish Massif resulting in restricted burial/early uplift and thus lower thermal maturity. One result of numerical modelling is that palaeo-heat flows during maximum burial (Westphalian or post-Westphalian) decreased southwards from approximately 65 to less than 50 mW/m2. Maximum burial depths for the base and top of the Namurian also decrease southwards from 7000 to 3600 m and 4600 to 1800 m, respectively, resulting in southwards-decreasing coalification of the respective stratigraphic horizon. Eroded overburden increases southwards (3100-5700 m), with the exception of the low-coalification zone, which is characterised by lower amounts of eroded overburden (1300-2900 m) and an earlier onset of erosion, i.e. in the Westphalian B rather than Westphalian D or post-Westphalian.  相似文献   

14.
Apatite fission-track (AFT) dating applied to uplifted Variscan basement blocks of the Bavarian Forest is employed to unravel the low-temperature history of this segment of the Bohemian Massif. Twenty samples were dated and confined track lengths of four samples were measured. Most samples define Cretaceous APT ages between 110 and 82 Ma (Albian to Campanian) and three samples give older ~148–140 Ma (Jurassic–Cretaceous boundary) ages. No discernible regional age variations exist between the areas north-east and south-west of the Pfahl shear zone, but >500 m post-Jurassic and post-Cretaceous vertical offsets along this and other faults can be inferred from elevation profile analyses. The AFT ages clearly postdate the Variscan exhumation history of the Bavarian Forest. Thermal modeling reveals that the ages are best explained by a slight reheating of the basement rocks to temperatures within the apatite partial annealing zone during the middle and late Jurassic and/or by late Cretaceous marine transgression causing burial heating, which affected marginal low-lying areas of the Bohemian Massif and the Bavarian Forest. Late Jurassic period was followed by enhanced cooling through the 120–60 °C temperature interval during the subsequent exhumation phase for which denudation rates of ~100 m myr?1 were calculated. On a regional scale, Jurassic–Cretaceous AFT ages are ubiquitous in marginal structural blocks of the Bohemian Massif and seem to reflect the exhumation of these zones more distinctly compared to central parts.  相似文献   

15.
Three groups of thermal springs with temperatures close to 70 °C discharge both in the core (at Bagni di Vinadio and Terme di Valdieri) and on the external margin (at Berthemont-Les-Bains) of the Argentera Massif. Detailed structural field analysis carried out on the hydrothermal sites allows us to delineate both a model of Alpine tectonic evolution of the Argentera Massif and the patterns of hydrothermal circulation that were active during its final exhumation. The observed fault rock assemblages provide information relative to deformation that occurred in viscous, frictional-to-viscous and frictional crustal regimes. During the Early Miocene, the Bersezio Fault Zone and the Fremamorta Shear Zone, two main mylonitic shear zones, mainly accommodated regional transpression and provided pathways for fluid flow promoting mineral reactions in greenschist facies. During the Late Miocene–Early Pliocene, frictional-to-viscous deformation affected the massif, which underwent predominant transpression in the internal sectors and extension on the external margin. During the Plio-Pleistocene, deformation in frictional condition accompanied the final exhumation of the massif in a transpressive regime and resulted in the development of the NW–SE striking cataclastic zones. The hydraulic properties of these structures mainly influence the patterns of the active thermal circulations and the localization of the recharge and discharge zones. At Berthemont these faults represent conduits, whereas at Vinadio and Valdieri they form complex systems of conduits and barriers. In these two latter sites, the cataclastic faults compose flower structures that constrain laterally the thermal fluid flows while intensely fractured granites sited at depth constitute a highly-transmissive geothermal reservoir. Less permeable migmatitic gneisses overlaying the granites prevent a massive infiltration of the cold fluids at depth. This context favours within the high-permeability fractures granites the development of buoyancy-driven flows which combined with topographically-driven flows, provided the conditions for the upflow of the high-temperature waters.  相似文献   

16.
牙形石色变度──ＣＡＩ值是一项有效的古地温指标，它不但可以帮助确定低级－极低级变质碳酸盐岩的最高变质温度，而且可以判别变质类型。本文在介绍牙形石ＣＡＩ值研究现状及低级－极低级变质作用研究现状的基础上，对运用ＣＡＩ值进行低级－极低级碳酸盐岩的研究进行了综述及探讨。  相似文献   

17.
Abstract

The Roc de Frausa Massif, located at the Eastern Pyrenees, is formed by a stratoid Pre-Hercynian deformed granite (orthogneiss) interbedded with metasedimentary series. Hercynian granitoids (St. Llorenç — La Jonquera pluton) surround the southern and eastern part of the massif and Hercynian basic igneous rocks (Ceret stock) occupy the central part of it. The Pre-Hercynian granite and the sedimentary series were involved, during the Hercynian orogeny, in complex polyphasic tectonics and metamorphism. As a result, an ubiquitous penetrative foliation was developed during the earlier stages. This foliation was subsequently folded into a complex antiformal structural formed by a double dome : Roc de Frausa dome and Mas Blanc dome. Main lithological boundaries (gneiss — metasediments and metasediments — granitoids) are broadly parallel to the regional foliation, and they all display the dome geometry. Interference fold pattern between two late phases, an ealier one with NE-SW trending folds and a younger one with NW-SE trending folds is responsible for the dome geometry. Mylonitic deformation, with W-E to NW-SE orientations has been attributed to the last folding phase. Regional metamorphic climax and contact metamorphism, the last one resulting from Hercynian granitoid emplacement, preceeded the above mentioned late folding event, which developed under retrograde metamorphic conditions. Regional peak metamorphism is recognized by the static crystallization of cordierite + potassium feldspar. This paragenesis indicates pressure — temperature conditions of about 3.1 Kbar and 660 °C maximum. Contact metamorphism overprints the earlier regional metamorphism. Parageneses and thermal gradient of contact metamorphism around La Jonquera pluton are very similar to those related to regional metamorphism, whereas parageneses produced around Ceret stock present garnet + potassium feldspar. Geothermometry indicates metamorphic conditions locally higher for this paragenesis (around 700 °C).  相似文献   

18.
The evolution of the European Cenozoic Rift System (ECRIS) and the Alpine orogen is discussed on the base of a set of palaeotectonic maps and two retro-deformed lithospheric transects which extend across the Western and Central Alps and the Massif Central and the Rhenish Massif, respectively.During the Paleocene, compressional stresses exerted on continental Europe by the evolving Alps and Pyrenees caused lithospheric buckling and basin inversion up to 1700 km to the north of the Alpine and Pyrenean deformation fronts. This deformation was accompanied by the injection of melilite dykes, reflecting a plume-related increase in the temperature of the asthenosphere beneath the European foreland. At the Paleocene–Eocene transition, compressional stresses relaxed in the Alpine foreland, whereas collisional interaction of the Pyrenees with their foreland persisted. In the Alps, major Eocene north-directed lithospheric shortening was followed by mid-Eocene slab- and thrust-loaded subsidence of the Dauphinois and Helvetic shelves. During the late Eocene, north-directed compressional intraplate stresses originating in the Alpine and Pyrenean collision zones built up and activated ECRIS.At the Eocene–Oligocene transition, the subducted Central Alpine slab was detached, whereas the West-Alpine slab remained attached to the lithosphere. Subsequently, the Alpine orogenic wedge converged northwestward with its foreland. The Oligocene main rifting phase of ECRIS was controlled by north-directed compressional stresses originating in the Pyrenean and Alpine collision zones.Following early Miocene termination of crustal shortening in the Pyrenees and opening of the oceanic Provençal Basin, the evolution of ECRIS was exclusively controlled by west- and northwest-directed compressional stresses emanating from the Alps during imbrication of their external massifs. Whereas the grabens of the Massif Central and the Rhône Valley became inactive during the early Miocene, the Rhine Rift System remained active until the present. Lithospheric folding controlled mid-Miocene and Pliocene uplift of the Vosges-Black Forest Arch. Progressive uplift of the Rhenish Massif and Massif Central is mainly attributed to plume-related thermal thinning of the mantle-lithosphere.ECRIS evolved by passive rifting in response to the build-up of Pyrenean and Alpine collision-related compressional intraplate stresses. Mantle-plume-type upwelling of the asthenosphere caused thermal weakening of the foreland lithosphere, rendering it prone to deformation.  相似文献   

19.
The Tokat Massif is a major metamorphic complex of the south-central Pontides, the origin and development of which have long remained unknown. Recent detailed field-based mapping has revealed the major geological features of this complex. The Tokat Massif appears to be a tectonic mosaic composed of three major components: (1) the Yesilirmak Group; (2) the Turhal Metaophiolite; and (3) the Amasya Group. The Yesilirmak Group, which consists of a coherent lithoiogical sequence involving Paleozoic basement and overlying Triassic units, represents a short-lived basin assemblage. The Turhal Metaophiolite consists of an ophiolitic melange association and slices of a stratigraphically ordered ophiolite. The Amasya Group, the highest-standing tectonic unit, is represented by a lower Paleozoic clastic succession.

The different major tectonostratigraphic assemblages of the Tokat Massif record a continent-continent collision between the Laurasian Amasya Group and the Gondwanan Yesilirmak Group. The Turhal Metaophiolite, sandwiched between the two continental fragments, represents remnants of an oceanic realm that was consumed between the two continents. The three major tectonic components were assembled and underwent regional metamorphism during the Late Triassic-Liassic transition, and were later covered during the Liassic by basal detrital units.  相似文献   

20.
《地学前缘(英文版)》2020,11(3):925-942
The Pb isotope composition of the upper mantle beneath Central Europe is heterogeneous due to the subduction of regionally contrasting material during the Variscan and Alpine orogenies.Late Variscan to Cenozoic mantlederived melts allow mapping this heterogeneity on a regional scale for the last ca.340 Myr.Late Cretaceous and Cenozoic anorogenic magmatic rocks of the Bohemian Massif(lamprophyres,volcanic rocks of basanite/tephrite and trachyte/phonolite series) concentrate mostly in the Eger Rift.Cretaceous ultramafic lamprophyres yielded the most radiogenic Pb isotope signatures reflecting a maximum contribution from metasomatised lithospheric mantle,whereas Tertiary alkaline lamprophyres originated from mantle with less radiogenic ~(206)Pb/~(204)b ratios suggesting a more substantial modification of lithospheric source by interaction with asthenosphericderived melts.Cenozoic volcanic rocks of the basanite/tephrite and trachyte/phonolite series define a linear mixing trend between these components,indicating dilution of the initial lithospheric mantle signature by upwelling asthenosphere during rifting.The Pb isotope composition of Late Cretaceous and Cenozoic magmatic rocks of the Bohemian Massif follows the same Pb growth curve as Variscan orogenic lamprophyres and lamproites that formed during the collision between Laurussia,Gondwana,and associated terranes.This implies that the crustal Pb signature in the post-Variscan mantle is repeatedly sampled by younger anorogenic melts.Most Cenozoic mantle-derived rocks of Central Europe show similar Pb isotope ranges as the Bohemian Massif.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号