首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
The lava sequence of the central-western Deccan Traps (from Jalgaon towards Mumbai) is formed by basalts and basaltic andesites having a significant variation in TiO2 (from 1.2 to 3.3 wt%), Zr (from 84 to 253 ppm), Nb (from 5 to 16ppm) and Ba (from 63 to 407 ppm), at MgO ranging from 10 to 4.2 wt%. Most of these basalts follow a liquid line of descent dominated by low pressure fractionation of clinopyroxene, plagioclase and olivine, starting from the most mafic compositions, in a temperature range from 1220° to 1125°C. These rocks resemble those belonging to the lower-most formations of the Deccan Traps in the Western Ghats (Jawhar, Igatpuri and Thakurvadi) as well as those of the Poladpur formation. Samples analyzed for87Sr/86Sr give a range of initial ratios from 0.70558 to 0.70621. A group of flows of the Dhule area has low TiO2 (1.2–1.5 wt%) and Zr (84–105 ppm) at moderate MgO (5.2–6.2 wt%), matching the composition of low-Ti basalts of Gujarat, low-Ti dykes of the Tapti swarm and Toranmal basalts, just north of the study area. This allows chemical correlations between the lavas of central Deccan, the Tapti dykes and the north-western outcrops. The mildly enriched high field strength element contents of the samples with TiO2 > 1.5 wt% make them products of mantle sources broadly similar to those which generated the Ambenali basalts, but their high La/Nb and Ba/Nb, negative Nb anomalies in the mantle normalized diagrams, and relatively high87Sr/86Sr, make evident a crustal input with crustally derived materials at less differentiated stages than those represented in this sample set, or even within the sub-Indian lithospheric mantle.  相似文献   

2.
Deccan basalts     
Mihir K. Bose 《Lithos》1972,5(2):131-145
The Deccan basalts now cover an area of c. 500,000 sq. km in central and western India. The lava pile varies in thickness from c. 2000 metres in western India to c. 100–200 metres in central India, exposing the upper and lower horizons of the volcanics respectively. The salient mineralogical and chemical characters of the basalts are reviewed. Dominantly the basalts are tholeiitic while minor alkalic variants in western India represent the closing phase of volcanic activity. The diversification of the magma to the west is associated with thickening of the lava pile and increase of heat flow. The ultrabasic flows (picrite basalts) are products of fractionation of the source magma of olivine tholeiitic composition. The minor acid variants (e.g. rhyolites, pitchstones, felsites, etc.) are possibly residual liquids of the ascending magma.  相似文献   

3.
《Gondwana Research》2002,5(3):649-665
The Mandla lobe in the eastern part of the Deccan volcanic province represents an isolated lava pile having a thickness of ∼900 m. The large thickness of this lava pile and its spatial detachment from the western Deccan outcrop points to a plausible second source. The stratigraphic configuration of the central and eastern Deccan lava sequences and their possible stratigraphic correlation are primarily based on geology and chemical signatures of the lava flows. Based on variations in the incompatible element ratios, the lava sequences of Chindwara, Jabalpur-Seoni and Jabalpur-Piparia sections were classified into four informal formations showing similarity with the southwestern formations. Major and trace element abundances in fifteen lava flows of Jabalpur area are similar to that of the southwestern Deccan lava flows. It has been found that the Ambenali Fm. and a few Khandala and Bushe Fm. flows are present in the northeastern Deccan. The regional mapping and detailed petrographic studies coupled with the lateral tracing have enabled the recognition of thirty-seven physically distinct lava flows and is justified by their major-elemental chemistry. The ‘intraflow variations’ studied in some of the flows is very low for most of the major oxides. These thirty-seven lava flows are grouped into eight chemical types. The order of superposition in this sequence reflects that the older flows occur in the west of the outlier at the Seoni-Jabalpur-Sahapura sector whereas, the younger flows are confined to the Dindori-Amarkantak sector in the east. The spatial disposition of the lava flows suggests that the structural complexity in the lava flow sequence in the Mandla lobe lies between Jabalpur and Dindori. The juxtaposition of distinct groups of lava flows are observed near Deori (flows 1 to 4 abeted aginst flows 5 to 14) and Dindori areas. At Dindori and towards its south the distinct lava packages (flows 15 to 27 and flows 28 to 37) are juxtaposed along the course of Narmada river. The possible explanation for this could be the presence of four post-Deccan faults at Nagapahar, Kundam, Deori and Dindori areas. The vertical shift of chemically distinct lava packages at different sectors in the outlier contravenes the idea of small regional dip and favours the presence of four NE-SW trending post-Deccan faults. Major geochemical breaks, when traced out from section to section, exhibit shifting in heights by approximately 150 m near Nagapahar and 300 m near Deori and Dindori areas. The field, petrographic and major-oxide data sets considered in conjuction with the magnetic chron reversal heights, support the inference that four faults trending NE-SW are present in the Mandla lobe.A commonality in the mineralo-chemical attributes of the infra (Lametas)-/inter-trappean as well as weathered Deccan basalt further favours their derivation from Deccan basalt, implying the availability of Deccan basalt during the Maastrichtian Lameta sedimentation. This observation does not match with the models suggesting an extremely short duration of Deccan volcanism (<0.5 Ma) at the KTB, but is congruent with the models advocating a more prolonged Deccan volcanism.  相似文献   

4.
Many tholeiitic dyke-sill intrusions of the Late Cretaceous Deccan Traps continental flood basalt province are exposed in the Satpura Gondwana Basin around Pachmarhi, central India. We present field, petrographic, major and trace element, and Sr–Nd–Pb isotope data on these intrusions and identify individual dykes and sills that chemically closely match several stratigraphically defined formations in the southwestern Deccan (Western Ghats). Some of these formations have also been identified more recently in the northern and northeastern Deccan. However, the Pachmarhi intrusions are significantly more evolved (lower Mg numbers and higher TiO2 contents) than many Deccan basalts, with isotopic signatures generally different from those of the chemically similar lava formations, indicating that most are not feeders to previously characterized flows. They appear to be products of mixing between Deccan basalt magmas and partial melts of Precambrian Indian amphibolites, as proposed previously for several Deccan basalt lavas of the lower Western Ghats stratigraphy. Broad chemical and isotopic similarities of several Pachmarhi intrusions to the northern and northeastern Deccan lavas indicate petrogenetic relationships. Distances these lava flows would have had to cover, if they originated in the Pachmarhi area, range from 150 to 350 km. The Pachmarhi data enlarge the hitherto known chemical and isotopic range of the Deccan flood basalt magmas. This study highlights the problems and ambiguities in dyke-sill-flow correlations even with extensive geochemical fingerprinting.  相似文献   

5.
N.C. Ghose 《Lithos》1976,9(1):65-73
The Deccan basalts are essentially composed of saturated tholeiitic lavas. However, undersaturated basalts, nephelinites, carbonatites, intermediate and acid differentiates have also been encountered in parts of western India (Upper Traps). Such unusual rocks are broadly aligned in two major rift zones in western India, the Narbada-Son and Cambay grabens and the faulted west coast. These rocks are younger than the earliest tholeiitic eruptions of central India (Lower Traps), but there are evidences of renewed eruptions of tholeiitic basalts in parts of western India. The earliest eruptions of Deccan basalts of quartz tholeiite composition have been derived by high degrees of partial melting of peridotite at moderate depth (37–41 km). The undersaturated basalts and nephelinites were possibly generated by low degrees of partial melting of garnet peridotite in the low velocity zone along the two tectonically active belts (rifts) in western India. The undersaturated basalts were formed prior to the break-up of Gondwanaland, when a concentration of pressure developed at the tectonically weak zones. The renewed eruptions of saturated tholeiites are thought to be post-tectonic, resulting from the release of stress when the tectonic events had ceased.  相似文献   

6.
We use the results of elevated pressure melting experiments to constrain the role of melt/mantle reaction in the formation of tholeiitic magma from Kilauea volcano, Hawaii. Trace element abundance data is commonly interpreted as evidence that Kilauea tholeiite is produced by partial melting of garnet lherzolite. We experimentally determine the liquidus relations of a tightly constrained estimate of primary tholeiite composition, and find that it is not in equilibrium on its liquidus with a garnet lherzolite assemblage at any pressure. The composition is, however, cosaturated on its liquidus with olivine and orthopyroxene at 1.4 GPa and 1425 °C, from which we infer that primary tholeiite is in equilibrium with harzburgite at lithospheric depths beneath Kilauea. These results are consistent with our observation that tholeiite primary magmas have higher normative silica contents than experimentally produced melts of garnet lherzolite. A model is presented whereby primary tholeiite forms via a two-stage process. In the first stage, magmas are generated by melting of garnet lherzolite in a mantle plume. In the second stage, the ascent and decompression of magmas causes them to react with harzburgite in the mantle by assimilating orthopyroxene and crystallizing olivine. This reaction can produce typical tholeiite primary magmas from significantly less siliceous garnet lherzolite melts, and is consistent with the shift in liquidus boundaries that accompanies decompression of an ascending magma. We determine the proportion of reactants by major element mass balance. The ratio of mass assimilated to mass crystallized (Ma/Mc) varies from 2.7 to 1.4, depending on the primary magma composition. We use an AFC calculation to model the effect of melt/harzburgite reaction on melt rare earth and high field strength element abundances, and find that reaction dilutes, but does not significantly fractionate, the abundances of these elements. Assuming olivine and orthopyroxene have similar heats of fusion, the Ma/Mc ratio indicates that reaction is endothermic. The additional thermal energy is supplied by the melt, which becomes superheated during adiabatic ascent and can provide more thermal energy than required. Melt/harzburgite reaction likely occurs over a range of depths, and we infer a mean depth of 42 km from our experimental results. This depth is well within the lithosphere beneath Kilauea. Since geochemical evidence indicates that melt/harzburgite reaction likely occurs in the top of the Hawaiian plume, the plume must be able to thin a significant portion of the lithosphere. Received: 4 February 1997 / Accepted: 27 August 1997  相似文献   

7.
Chemical analysis of nine Deccan flow basalts at Anjar, Kutch, western India, indicates that all, except the uppermost flow F-9, are alkaline. In their major and trace element composition, the alkali basalts resemble Ocean island basalts (OIB). Similarities of many diagnostic trace element ratios (e.g. Sm/Nd, Ba/Nb,Y/Nb and Zr/Nb) are similar to those found in the Réunion Island basalts. The uppermost basalt is tholeiitic and chemically resembles the least contaminated Deccan basalt (Ambenali type). The Anjar basalts have iridium concentration ranging between 2 and 178 pg/g. Some of these values are higher by about an order of magnitude compared to the Ir concentration in other basalts of the Deccan. A synthesis of chemical, palaeomagnetic and geochronologic data enables us to construct a chemical and magnetic stratigraphy for these flows. The three flows below the iridium enriched intertrappean bed (IT III) show normal magnetic polarity whereas all except one of the upper basalts show reversed magnetic polarity. The sequence seems to have started in polarity zones 31N and probably continued up to 28R or 27R. The results presented here support the view that Deccan volcanism in Kutch occurred on a time span of a few million years.  相似文献   

8.
We present new 40Ar-39 Ar plagioclase crystallization ages from the dykes exposed at the northern slope of the Satpura Mountain range near Betul-Jabalpur-Pachmarhi area,~800 km NE of the Western Ghats escarpment.Among the two plateau ages,the first age of 66.56±0.42 Ma from a dyke near Mohpani village represents its crystallization age which is either slightly older or contemporaneous with the nearby Mandla lava flows(63-65 Ma).We suggest that the Mohpani dyke might be one of the feeders for the surrounding lava flows as these lavas are significantly younger than the majority of the main Deccan lavas of the Western Ghats(66.38-65.54 Ma).The second age of 56.95±1.08 Ma comes from a younger dyke near Olini village which cuts across the lava flows of the area.The age correlates well with the Mandla lavas which are chemically similar to the uppermost Poladpur,Ambenali and Mahabaleshwar Formation lavas of SW Deccan.Our study shows that the dyke activities occurred in two phases,with the second one representing the terminal stage.  相似文献   

9.
The Mandla lobe is a 900 m thick lava pile that forms a 29,400 km2 northeastern extension of the Deccan Traps. Earlier, combined field, petrographic, and major element studies have shown that this lobe comprises 37 lava flows. Using a combination of trace elements (Ba, Ti, Zr, Rb, Sr) and Nb/Zr values, we group the flows into six chemical types (A–F) that are separated stratigraphically. Combined trace element and Nd-Pb-Sr isotopic data, document the presence of lavas resembling those of the Poladpur Formation and less abundantly, the Ambenali Formation of the southwestern Deccan are in conformity with the earlier reconnaissance work. In addition, our data reveal several flows similar to those of the Mahabaleshwar Formation, the type sections of which are located?~?900 km to the southwest. Based on the isotopic data the superposition of Mahabaleshwar-like flows over flows with Ambenali- and Poladpur-like characteristics is in the same stratigraphic order seen in the southwestern Deccan type section. However, from the stratigraphy indicated by the Discriminant Function Analysis (DFA) results and the serious discrepancy between the DFA and isotopic data, it seems that few Mandla lobe flows are different and not in the same stratigraphic order as in the southwestern part of the province. To some extent the differences may be explained by faulting along four large post-Deccan normal faults near Nagapahar, Kundam, Deori, and Dindori areas across which offsets of ~150 m have been measured. This post-emplacement faulting accounts for the presence of several chemically Mahabaleshwar-like lavas at the base of the ~900 m thick Mandla lobe pile, at a lower elevation than a thick sequence dominated by chemically Poladpur-like flows. However, presence of common signature lavas (similar to that in the northeastern Deccan) cannot be ruled out in this area. They are similar to Poladpur-type lavas both chemically and isotopically. They appear in different formations and erupted at different times other than Poladpur Formation. Close similarities in petrogenetic processes between the two regions are indicated, although it is not clear whether any of the Mandla lobe lavas are far-traveled counterparts of flows cropping out in the southwestern Deccan, or whether some magma migrated laterally in dike systems over great distances. Feeder dykes have not been found in the study area except for Chakhla-Delakhari Intrusive Complex (CDIC) in Satpura region that shows major and trace elemental similarities with the Seoni lavas, although, long distance transport of magma is yet to be proved. The Poladpur-like Mandla lobe flows appear to be different flows from those of the Poldapur Formation in the southwest, as they are somewhat different in isotopic (higher 206Pb/204Pb) composition. They also differ from any known flows in the other southwestern formations, but are broadly similar to flows found in sections across the northern Deccan west of the Mandla lobe.  相似文献   

10.
Electron probe analyses of clinopyroxenes from several areas of the Deccan and Rajmahal Traps consisting mostly of subalkalic and alkalic basalts, picritic basalts and a few dolerite dykes have been obtained. Evaluation of the data indicate the absence of pigeonite from subalkalic basalts that occur in close spatial association with mild or strongly alkalic basalts in areas such as Rajpipla, Navagam and central Kachchh. Co-existence of augite and pigeonite, however, has been noticed in subalkalic basalts/dykes and picritic basalts from a number of Deccan localities such as Sagar, Igatpuri, Kalsubai, Triambak, Pavagarh and Girnar besides the one sample from Rajmahal. Diopside, salite, and wollastonite-rich compositions dominate the basanites and foidites of Kachchh whereas chrome-diopside and salite are the main types in the picrite basalt samples from Anila, Botad and Paliyad in Saurashtra akin to those found in contiguous areas in the east from borehole flows at Dhandhuka and Wadhwan studied in detail previously. Compositional variations in zoned clinopyroxenes indicate differentiation of the parental magma and also mixing of different magma types (subalkalic and alkalic) from areas such as Igatpuri, Rajpipla and Kachchh. Based on host-rock chemistry, total alkalis-silica plot, CIPW norms, estimated temperatures of eruption and augite – pigeonite thermometry, it has been inferred that clinopyroxene compositions, especially the incidence of pigeonite, appear to be very sensitive to bulk chemistry of host rocks, especially their Na2O, K2O, SiO2, total iron and TiO2 contents. Non-quadrilateral cationic components in the clinopyroxenes, such as Al in tetrahedral and octahedral positions together with Si, Na, Ti and Cr abundances have been found to be useful to discriminate clinopyroxenes from alkalic and subalkalic basalt types besides inferences on the ferric iron component in them. Evaluation of host-rock compositions in the ternary olivine–clinopyroxene-quartz plot indicate polybaric conditions of crystallization and evolution especially in samples that are picritic (e.g. Pavagarh, Anila and Kachchh) and which could also breach the olivine–clinopyroxene-plagioclase thermal divide that exists in part between alkalic and subalkalic basalts under atmospheric conditions.  相似文献   

11.
The nature and style of emplacement of Continental Flood Basalt (CFB) lava flows has been a matter of great interest as well as considerable controversy in the recent past. However, even a cursory review of published literature reveals that the Columbia River Basalt Group (CRBG) and Hawaiian volcanoes provide most of the data relevant to this topic. It is interesting to note, however, that the CRBG lava flows and their palaeotopographic control is atypical of other CFB provinces in the world. In this paper, we first present a short overview of important studies pertaining to the emplacement of flood basalt flows. We then briefly review the morphology of lava flows from the Deccan Volcanic Province (DVP) and the Columbia-Oregon Plateau flood basalts. The review underscores the existence of significant variations in lava flow morphology between different provinces, and even within the same province. It is quite likely that there were more than one way of emplacing the voluminous and extensive CFB lava flows. We argue that the establishment of general models of emplacement must be based on a comprehensive documentation of lava flow morphology from all CFB provinces.  相似文献   

12.
The genesis of basaltic magmas   总被引：29，自引：2，他引：29  
This paper reports the results of a detailed experimental investigation of fractionation of natural basaltic compositions under conditions of high pressure and high temperature. A single stage, piston-cylinder apparatus has been used in the pressure range up to 27 kb and at temperatures up to 1500° C to study the melting behaviour of several basaltic compositions. The compositions chosen are olivine-rich (20% or more normative olivine) and include olivine tholeiite (12% normative hypersthene), olivine basalt (1% normative hypersthene) alkali olivine basalt (2% normative nepheline) and picrite (3% normative hypersthene). The liquidus phases of the olivine tholeiite and olivine basalt are olivine at 1 Atmosphere, 4.5 kb and 9 kb, orthopyroxene at 13.5 and 18 kb, clinopyroxene at 22.5 kb and garnet at 27 kb. In the alkali olivine basalt composition, the liquidus phases are olivine at 1 Atmosphere and 9 kb, orthopyroxene with clinopyroxene at 13.5 kb, clinopyroxene at 18 kb and garnet at 27 kb. The sequence of appearance of phases below the liquidus has also been studied in detail. The electron probe micro-analyser has been used to make partial quantitative analyses of olivines, orthopyroxenes, clinopyroxenes and garnets which have crystallized at high pressure.These experimental and analytical results are used to determine the directions of fractionation of basaltic magmas during crystallization over a wide range of pressures. At pressures corresponding to depths of 35–70 km separation of aluminous enstatite from olivine tholeiite magma produces a direct fractionation trend from olivine tholeiites through olivine basalts to alkali olivine basalts. Co-precipitation of sub-calcic, aluminous clinopyroxene with the orthopyroxene in the more undersaturated compositions of this sequence produces derivative liquids of basanite type. Magmas of alkali olivine basalt and basanite type represent the lower temperature liquids derived by approximately 30% crystallization of olivine-rich tholeiite at 35–70 km depth. At depths of about 30 km, fractionation of olivine-rich tholeiite with separation of both olivine and low-alumina enstatite, joined at lower temperatures by sub-calcic clinopyroxene, leads to derivative liquids with relatively constant SiO2 (48 to 50%) increasingly high Al2O3 (15–17%) contents and retaining olivine + hypersthene normative chemistry (5–15% normative olivine). These have the composition of typical high-alumina olivine tholeiites. The effects of low pressure fractionation may be superimposed on magma compositions derived from various depths within the mantle. These lead to divergence of the alkali olivine basalt and tholeiitic series but convergence of both the low-alumina and high-alumina tholeiites towards quartz tholeiite derivative liquids.The general problem of derivation of basaltic magmas from a mantle of peridotitic composition is discussed in some detail. Magmas are considered to be a consequence of partial melting but the composition of a magma is determined not by the depth of partial melting but by the depth at which magma segregation from residual crystals occurs. Magma generation from parental peridotite (pyrolite) at depths up to 100 km involves liquid-crystal equilibria between basaltic liquids and olivine + aluminous pyroxenes and does not involve garnet. At 35–70 km depth, basaltic liquids segregating from a pyrolite mantle will be of alkali olivine basalt type with about 20% partial melting but with increasing degrees of partial melting, liquids will change to olivine-rich tholeiite type with about 30% melting. If the depth of magma segregation is about 30 km, then magmas produced by 20–25% partial melting will be of high-alumina olivine tholeiite type, similar to the oceanic tholeiites occurring on the sea floor along the mid-oceanic ridges.Hypotheses of magma fractionation and generation by partial melting are considered in relation to the abundances and ratios of trace elements and in relation to isotopic abundance data on natural basalts. It is shown that there is a group of elements (including K, Ti, P, U, Th, Ba, Rb, Sr, Cs, Zr, Hf and the rare-earth elements) which show enrichment factors in alkali olivine basalts and in some tholeiites, which are inconsistent with simple crystal fractionation relationships between the magma types. This group of elements has been called incompatible elements referring to their inability to substitute to any appreciable extent in the major minerals of the upper mantle (olivine, aluminous pyroxenes). Because of the lack of temperature contrast between magma and wall-rock for a body of magma near to its depth of segregation in the mantle, cooling of the magma involves complementary processes of reaction with the wall-rook, including selective melting and extraction of the lowest melting fraction. The incompatible elements are probably highly concentrated in the lowest melting fraction of the pyrolite. The production of large overall enrichments in incompatible elements in a magma by reaction with and highly selective sampling of large volumes of mantle wall-rock during slow ascent of a magma is considered to be a normal, complementary process to crystal fractionation in the mantle. This process has been called wall-rock reaction. Magma generation in the mantle is rarely a simple, closed-system partial melting process and the isotopic abundances and incompatible element abundances of a basalt as observed at the earth's surface may be largely determined by the degree of reaction with the mantle or lower crustal wall-rocks and bear little relation to the abundances and ratios of the original parental mantle material (pyrolite).Occurrences of cognate xenoliths and xenocrysts in basalts are considered in relation to the experimental data on liquid-crystal equilibria at high pressure. It is inferred that the lherzolite nodules largely represent residual material after extraction of alkali olivine basalt from mantle pyrolite or pyrolite which has been selectively depleted in incompatible elements by wall-rock reaction processes. Lherzolite nodules included in tholeiitic magmas would melt to a relatively large extent and disintegrate, but would have a largely refractory character if included in alkali olivine basalt magma. Other examples of xenocrystal material in basalts are shown to be probable liquidus crystals or accumulates at high pressure from basaltic magma and provide a useful link between the experimental study and natural processes.  相似文献   

13.
Tholeiite basalts from 60° N to 65° N on the Mid-Atlantic Ridge were melted and recrystallized at atmospheric pressure in a CO2-H2 gas mixture. Seven basalts are from the Langjokull-Thingvellir volcanic zone and the Reykjanes Peninsula of Iceland and nine are from the Reykjanes Ridge. The crystallization sequence in both Iceland and Reykjanes Ridge basalts with (Total Fe as FeO)/(Total Fe as FeO+ MgO) [F/F + M] less than 0.6 is olivine, plagioclase, clinopyroxene. Chromian spinel crystallizes before plagioclase in one Iceland and one Reykjanes Ridge basalt with F/F+M less than 0.57. Chemical differences of the two groups of basalts (lower SiO2 and higher alkalis in Iceland basalts) can not simply be a result of low pressure fractional crystallization. Liquidus temperatures of the seven Iceland basalts decreases from 1,230° C to 1,170° C as the F/F+M of the rock increases from 0.52 to 0.70. The liquidus temperatures of the Reykjanes Ridge basalts are about 10° C lower than those of the Iceland basalts for the same F/F+M value. The profile of measured liquidus temperatures from 65° N on Iceland to 60° N on the Reykjanes Ridge has a minimum value at 63.2° N on the Reykjanes Ridge just south of Iceland. Model calculations of the pressure of phenocryst crystallization indicate that olivine and plagioclase in Langjokull basalts could have equilibrated between 2.0 and 6.2 kb (200 to 620 MPa). Phenocryst assemblages in Reykjanes Ridge basalts at 60° N could have crystallized together at greater than 2 kb (200 MPa) and probably less than 8 kb (800 MPa). A minimum in the equilibrium pressure of phenocryst crystallization occurs between 62.9° and 64° N and coincides with the minimum in the experimentally determined liquidus temperatures. The more extensive fractionation at low pressure in this area could be related to the shift of the Mid-Atlantic Ridge axis along the leaky transform fault from the Reykjanes Ridge to the Thingvellir volcanic zone.  相似文献   

14.
The geochemistry of Quaternary volcanic rocks from Datong provides important constraints on the petrogenesis of continental alkali and tholeiitic basalts and lithospheric evolution in the western North China Craton. Alkali basalts in north Datong have trace element compositions similar to oceanic island basalts (OIB). They show nearly homogenous isotopic compositions (?Nd = 5.4-6.8 and 87Sr / 86Sr = 0.7035-0.7037) that resemble the nearby Hannuoba Miocene basalts, indicating that the two lava suites share a similar asthenospheric source. However, Datong basalts have conspicuously lower Al2O3 and CaO, higher SiO2 and HREE contents and Na / Ti ratios, compared to Hannuoba lavas at comparable MgO. This compositional difference is attributable to the combined effect of source difference and temporal decrease in melting depth. The latter reflects Cenozoic lithospheric thinning of the western North China Craton.Tholeiitic basalts in southeast Datong have incompatible element ratios that differ from OIB; they have lower ?Nd (1.3-3.7) and higher 87Sr / 86Sr (0.7039-0.7046) compared to alkali basalts. These moderately evolved rocks (MgO < 7%) display unusually high Cr concentrations (> 200 ppm), a nearly flat LREE pattern and a fractionated HREE with the “kink” occurring at Gd. A shallow melting depth (< 60 km), suggested by their Q-normative composition, is in conflict with the residual garnet in the source (> 75 km) as required by REE modeling. This paradox, which is reminiscent of that for Hawaiian tholeiites, can be reconciled if garnet lherzolite melts react with refractory peridotites during which orthopyroxene is dissolved and olivine precipitates. The diagnostic consequence of this melt-rock reaction includes increases in SiO2 and Cr, decreases in Al2O3 and CaO, and formation of “kinked” REE patterns. Involvement of lithospheric mantle in the genesis of Datong tholeiites may be related to the Cenozoic lithospheric thinning/erosion in the western North China Craton. The spatial distribution of Datong alkali and tholeiitic basalts may be related to enhanced extension along the lithospheric boundary between the Western Block of the North China Craton and the Trans-North China Orogen.  相似文献   

15.
Kahoolawe Island, Hawaii (18×11 km), is a basaltic shield volcano with caldera-filling lavas, seven identified postshield vents, and at least two occurrences of apparent rejuvenated-stage eruptive. We examined 42 samples that represent all stages of Kahoolawe volcano stratigraphy for their petrography, whole-rock major-and trace-element contents, mineral compositions, and K–Ar ages. The two oldest shield samples have an average age of 1.34±0.08 Ma, and four postshield samples (3 are alkalic) average 1.15±0.03 Ma; ages of 1.08 and 0.99 Ma for two additional tholeiitic samples probably are minimum ages. Whole-rock major- and trace-element and mineral compositions of Kahoolawe shield and caldera-fill laves are generally similar to the lavas forming Kilauea and Mauna Loa tholeiitic shields, but in detail, Kahoolawe shield lavas have distinctive compositions. An unusual aspect of many postshield Ka-hoolawe lavas is anomalously high REE and Y abundances (up to 200 ppm La and 175 ppm Y) and negative Ce anomalies. These enrichments reflect surficial processes, where weathering and soil development promoted REE-Y transport at the weathering front. Major element abundances (MgO, 10–6 wt.%) for shield and caldera-fill basalts are consistent with fractionation of ol+px+pl in frequently replenished magma reservoirs. In general, tholeiitic basalts erupted from late vents are higher in SiO2 than the shield lavas, and temporal differences in parental magma compositions are the likely explanation. Alkalic basalts that erupted from vents are comparable in composition to those at other Hawaiian volcanoes. Trace-element abundance ratios indicate that alkalic basalts represent either relatively lower degrees of melting of the shield source or a distinct source. Apparent rejuvenated-stage basalts (i.e., emplaced after substantial Kahoolawe erosion) are tholeiitic, unlike the rejuvenated-stages at other Hawaiian volcanoes (alkalic). Kahoolawe, like several other Hawaiian volcanoes, has intercalated tholeiitic and alkalic basalts in the postshield stage, but it is the only volcano that appears to have produced tholeiitic rejuvenated-stage lavas.  相似文献   

16.
Compressional (VP) and shear (VS) wave velocities and the dependent elastic constants have been determined by the pulse transmission technique to 6 kb confining pressure at room temperature and to 700° C at 6 kb confining pressure for eleven basalts from the Faeroe Islands. The Faeroe basalts investigated are tholeiitic, they clearly lie within the tholeiitic area, and display a pronounced trend of iron enrichment from rocks with an M/M + F ratio of 0.5 to rocks with an M/M + F ratio of about 0.25. The mean VP and VS for eleven specimens are 5.57 km/sec and 3.18 km/sec, respectively. Velocity—density relations for the basalts might be more appropriately described by non-linear solutions than by linear relations commonly used for basalts. In general, VP and VS remain unaffected by temperature up to 300° C. At higher temperature the changes in wave velocities are influenced by metamorphic processes and are, therefore, somewhat erratic. In zeolite-bearing specimens an abrupt velocity decrease around 350°C is observed, which correlates well with a drastic compaction of bulk volume. Additional experiments on cold-pressed zeolite powder clearly indicate that the sharp velocity decrease in the basalts is related to dehydration of zeolite minerals. Partial-melting processes, which occur within vesicules and pore-spaces at distinctly higher temperatures have no additional effect on wave velocity. Comparison with field data reveals that, without exception, the velocities at 0.5 kb confining pressure display the same range that has been commonly noted in refraction data for Layer 2. There are no significant differences in wave velocities and the pressure—temperature dependence in samples recovered from the upper, middle, and lower basalt series in the Faeroe Islands.  相似文献   

17.
A mafic sill-like intrusion, ~5?×?30 m, exposed along the eastern shoreline of Kahoolawe Island, Hawaii, represents tholeiitic magma emplaced as diabase among caldera-filling lavas. It differentiated from ~7.8 wt.% MgO to yield low-MgO (2.9 wt.%) vesicular segregation veins. We examined the intrusion for whole-rock and mineral compositions for comparison to Kahoolawe caldera-fill lavas (some also diabasic), to the Uwekahuna laccolith (Kilauea), and to gabbros, diabases, and segregations and oozes of other tholeiitic shield volcanoes (e.g., Mauna Loa and Kilauea lava lakes). We also evaluate this extreme differentiation in terms of MELTS modeling, using parameters appropriate for Hawaiian crystallization environments. Kahoolawe intrusion diabase samples have major and trace element abundances and plagioclase, pyroxene, and olivine compositions in agreement with those in gabbros and diabases of other volcanoes. However, the intrusion samples are at the low-MgO end of the large MgO range formed by the collective comparative samples, as many of those have between 8 and 20 wt.% MgO. The intrusion’s segregation vein has SiO2 53.4 wt.%, TiO2 3.2 wt.%, FeO 13.5 wt.%, Zr 350 ppm, and La 16 ppm. It plots in compositional fields formed by other Hawaiian segregations and oozes that have MgO <5 wt.%—fields that show large variances, such as factor of ~2 differences for incompatible element abundances accompanying SiO2 from ~49 to 59 wt.%. Our MELTS modeling assesses the Kahoolawe intrusion as differentiating from ~8 wt.% MgO parent magma beginning along oxygen buffers equivalent to FMQ and FMQ-2, having magmatic H2O of 0.15 and 0.7 wt.% (plus traces of CO2 and S), and under 100 and 500 bars pressure. Within these parameters, MELTS calculates that <3 wt.% MgO occurs at ~1,086 to 1,060 °C after ~48 to 63 % crystallization, whereby the lesser crystallization percentages and lower temperatures equate to higher magmatic H2O, leading to high SiO2, ~56–58 wt.%. To contrast, greater crystallization is calculated for lower H2O, for which it achieves less SiO2, <55 wt.%. While MELTS reliably predicts SiO2 approaching 58 wt.% for differentiation beyond <4 wt.% MgO, and shows that Kahoolawe intrusion’s segregations and those of Kilauea and Mauna Loa are all reasonably accommodated by the modeled parameters and SiO2 differentiation curves, MELTS fails where it predicts that Fe enrichment is more robust under FMQ than FMQ-2 buffers. That failure not withstanding, MELTS differentiation from liquidus temperatures ~1,205–1,185 °C (depending on the various parameters) gradually increases fO2 (up to ~0.4 log units, as normalized to FMQ) until magnetite crystallizes at ~1,090–1,085 °C, which reduces absolute fO2 ~1 to 1.5 log units. The modeled Kahoolawe intrusion, then, exemplifies how tholeiitic magma differentiation can produce extreme SiO2 and incompatible element compositions, and how Hawaiian segregations from shallow intrusions and lava lakes can be generally modeled under compositional and physical parameters appropriate for Hawaiian tholeiitic magmatism.  相似文献   

18.
Rubbly pahoehoe lava flows are abundant in many continental flood basalts including the Deccan Traps. However, structures with radial joint columns surrounding cores of flow-top breccia (FTB), reported from some Deccan rubbly pahoehoe flows, are yet unknown from other basaltic provinces. A previous study of these Deccan “breccia-cored columnar rosettes” ruled out explanations such as volcanic vents and lava tubes, and showed that the radial joint columns had grown outwards from cold FTB inclusions incorporated into the hot molten interiors. How the highly vesicular (thus low-density) FTB blocks might have sunk into the flow interiors has remained a puzzle. Here we describe a new example of a Deccan rubbly pahoehoe flow with FTB-cored rosettes, from Elephanta Island in the Mumbai harbor. Noting that (1) thick rubbly pahoehoe flows probably form by rapid inflation (involving many lava injections into a largely molten advancing flow), and (2) such flows are transitional to ‘a’ā flows (which continuously shed their top clinker in front of them as they advance), we propose a model for the FTB-cored rosettes. We suggest that the Deccan flows under study were shedding some of their FTB in front of them as they advanced and, with high-eruption rate lava injection and inflation, frontal breakouts would incorporate this FTB rubble, with thickening of the flow carrying the rubble into the flow interior. This implies that, far from sinking into the molten interior, the FTB blocks may have been rising, until lava supply and inflation stopped, the flow began solidifying, and joint columns developed outward from each cold FTB inclusion as already inferred, forming the FTB-cored rosettes. Those rubbly pahoehoe flows which began recycling most of their FTB became the ‘a’ā flows of the Deccan.  相似文献   

19.
The least-altered, Permian mafic volcanic rocks from the Pang Mayao area, Phrao District, Chiang Mai Province, part of Chiang Rai–Chiang Mai volcanic belt, have been analyzed and are found to be mid-ocean ridge and ocean–island basalts. The mid-ocean ridge basalts occur as lava flows or dike rocks. They are equigranular, fine- to medium-grained and consist largely of plagioclase, clinopyroxene and olivine. These basalt samples are tholeiitic, and have compositions very similar to T-MORB from the region where the Du Toit Fracture Zone intersects the Southwest Indian Ridge. The ocean–island basalt occurs as pillow breccia, and lava flows or dike rocks. They are slightly to moderately porphyritic, with phenocrysts/microphenocrysts of clinopyroxene, olivine, plagioclase and/or Fe–Ti oxide. The groundmass is very fine-grained, and made up largely of felty plagioclase laths with subordinate clinopyroxene. These basalt samples are alkalic, and chemically analogous to those from Haleakala Volcano, Maui, Hawaiian Chain. These mafic volcanic rocks may have been formed in a major ocean basin rather than in a mature back-arc basin.  相似文献   

20.
Several basaltic lava flows have been identified in the study area in and around Linga, in the Eastern Deccan Volcanic Province (EDVP) on the basis of distinctly developed structural zones defined by primary volcanic structures such as columnar joints and vesicles. These basaltic lava flows are spatially distributed in four different sectors, viz., (i) Bargona–Gadarwara (BG) sector (ii) Shikarpur–Linga (SL) sector (iii) Arjunvari–Survir Hill (AS) sector and (iv) Kukrachiman–Morand Hill (KM) sector. A three-tier classification scheme has been adopted for the characterization and classification of individual lava flows. Each lava flow consists of a Lower Colonnade Zone (LCZ) overlain by the Entablature Zone (EZ) and Upper Colonnade Zone (UCZ). The LCZ and UCZ grade into a distinct/indistinct Lower Vesicular Zone (LVZ) and Upper Vesicular Zone (UVZ), respectively. The LCZ and UCZ of the flows are characterized by columnar joints while the EZ is marked by multi-directional hackly jointing. The geometry of different joint patterns corresponds to different styles of cooling during solidification of lava flows. Detailed petrographic studies of the investigated lava flows reveal inequigranular phenocrystal basalts characterized by development of phenocrystal phases including plagioclase, clinopyroxene and olivine, whereas groundmass composition is marked by tiny plagioclase, clinopyroxene, opaque mineral and glass. Electron microprobe analyses indicate that the olivine has a wide range ∼Fo22 to Fo66 revealing a wide spectrum of compositional variation. Pyroxene compositions are distinctly designated as Quad pyroxenes. Phenocrystal pyroxenes are mostly diopsidic, while the groundmass pyroxenes mainly correspond to augite with a minor pigeonite component. Pyroxene phenocrysts are characterized by a prominent Ti-enrichment. Phenocrystal plagioclase grains are calcic (An52.7–An72.9), whereas groundmass plagioclase are relatively sodic (An39.2–An61.6). Groundmass opaque minerals are characteristically found to be Ti–magnetite/ilmenite/pyrophanite. Pyroxene thermometry reveals a temperature span of 850°C to 1280°C for the studied lavas while olivine–clinopyroxene thermometry yields a temperature range from 1040°–1160°C. The variation of temperature for the lava flows is ascribed to their normal cooling history after eruption.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号