共查询到20条相似文献，搜索用时 31 毫秒
1.
《Applied Geochemistry》2002,17(1):1-10
The aliphatic hydrocarbon composition (acyclic isoprenoids, hopanoids and steroids) of oils from the most productive fields in the southern geological Province of Cuba have been studied. This province is defined by its position with respect to the Cretaceous overthrust belt generated during the formation of oceanic crust along the axis of the proto-Caribbean Basin. The relative abundances of 18α(H)-22,29,30-trisnorneohopane, gammacerane and diasteranes suggest that Pina oils are related to the carbonate oils from the Placetas Unit in the northern province (low Ts/(Ts+Tm) and C27,29 rr/(rr+sd) ratios). The Cristales and Jatibonico oils exhibit some differentiating features such as higher Ts/(Ts+Tm) and absence of gammacerane. The oils from this province do not exhibit significant differences in either hopane, C32 22S/(S+R) and C30 αβ/(αβ+βα), or sterane, C29 αα 20S/(S+R), maturity ratios. However, the relative content of 5α(H),14β(H),17β(H)-cholestanes (C29 ββ/(ββ+αα) ratio) indicates that Pina oils are more mature than Cristales and Jatibonico oils. Several of these oils (Cristales, Jatibonico and Pina 26) are heavily biodegraded, lacking n-alkanes, norpristane, pristane and phytane (the two former oils do not contain acyclic isoprenoid hydrocarbons). Other biodegradation products, the 25-norhopanes, are found in all the oils. Their occurrence is probably due to mixing of severely biodegraded oil residues with undegraded crude oils during accumulation in the reservoir. 相似文献
2.
Geochemical characterisation of 18 crude oils from the Potwar Basin (Upper Indus), Pakistan is carried out in this study. Their relative thermal maturities, environment of deposition, source of organic matter (OM) and the extent of biodegradation based on the hydrocarbon (HC) distributions are investigated. A detailed oil-oil correlation of the area is established. Gas chromatography-mass spectrometry (GC-MS) analyses and bulk stable carbon and hydrogen isotopic compositions of saturated and aromatic HC fractions reveals three compositional groups of oils. Most of the oils from the basin are typically generated from shallow marine source rocks. However, group A contains terrigenous OM deposited under highly oxic/fluvio-deltaic conditions reflected by high pristane/phytane (Pr/Ph), C30 diahopane/C29Ts, diahopane/hopane and diasterane/sterane ratios and low dibenzothiophene (DBT)/phenanthrene (P) ratios. The abundance of C19-tricyclic and C24-tetracyclic terpanes are consistent with a predominant terrigenous OM source for group A. Saturated HC biomarker parameters from the rest of the oils show a predominant marine origin, however groups B and C are clearly separated by bulk δ13C and δD and the distributions of the saturated HC fractions supporting variations in source and environment of deposition of their respective source rocks. Moreover, various saturated HC biomarker ratios such as steranes/hopanes, diasteranes/steranes, C23-tricyclic/C30 hopane, C28-tricyclic/C30 hopane, total tricyclic terpanes/hopanes and C31(R + S)/C30 hopane show that two different groups are present. These biomarker ratios show that group B oils are generated from clastic-rich source rocks deposited under more suboxic depositional environments compared to group C oils. Group C oils show a relatively higher input of algal mixed with terrigenous OM, supported by the abundance of extended tricyclic terpanes (up to C41+) and steranes.Biomarker thermal maturity parameters mostly reached to their equilibrium values indicating that the source rocks for Potwar Basin oils must have reached the early to peak oil generation window, while aromatic HC parameters suggest up to late oil window thermal maturity. The extent of biodegradation of the Potwar Basin oils is determined using various saturated HC parameters and variations in bulk properties such as API gravity. Groups A and C oils are not biodegraded and show mature HC profiles, while some of the oils from group B show minor levels of biodegradation consistent with high Pr/n-C17, Ph/n-C18 and low API gravities. 相似文献
3.
Anhydrous non-isothermal heating experiments were conducted under controlled compressive stress on cylindrical plugs of six oil shales from Permian through Eocene age. The objective of this study was to compare the distribution of acyclic paraffins in initial, residual and expelled organic matter and to highlight causes of compositional differences resulting from expulsion. Pristane generation from kerogen is highest in the Eocene Messel shale and affects the pristane / phytane (pr / ph) ratio commonly used as a redox proxy. The isoprenoid to n-alkane ratios (pr / n-C17, ph / n-C18) decrease during generation and are lowest in the residual bitumen due to preferential generation and retention of n-alkanes. The n-alkane distribution shows that only lacustrine shales produce high wax oils. Evaporative fractionation leads to loss of n-alkanes up to n-C20 with boiling points below 350 °C. This demonstrates that lacustrine and marine shales may lead to accumulation of low wax oils due to evaporative fractionation after expulsion. 相似文献
4.
Light hydrocarbons (LHs) are one of the main petroleum fractions in crude oils, and carry much information regarding the genetic origin and alteration of crude oils. But secondary alterations—especially biodegradation—have a significant effect on the composition of LHs in crude oils. Because most of the LHs affected in oils underwent only slight biodegradation (rank 1 on the biodegradation scale), the variation of LHs can be used to describe more the refined features of biodegradation. Here, 23 crude oils from the Dawanqi Oilfield in the Tarim Basin, NW China, eleven of which have been biodegraded to different extents, were analyzed in order to investigate the effect of slight to minor biodegradation on C6–C7 LHs. The study results showed that biodegradation resulted in the prior depletion of straight-chained alkanes, followed by branched alkanes. In slight and minor biodegraded oils, such biodegradation scale could not sufficiently affect C6–C7 cycloalkanes. For branched C6–C7 alkanes, generally, monomethylalkanes are biodegraded earlier than dimethylalkanes and trimethylalkanes, which indicates that branched alkanes are more resistant to biodegradation, with the increase of substituted methyl groups on parent rings. The degree of alkylation is one of the primary controlling factors on the biodegradation of C6–C7 LHs. There is a particular case: although 2,2,3-trimethylbutane has a relative higher alkylation degree, 2,2-dimethylpentane is more resistant to biodegradation than 2,2,3-trimethylbutane. 2,2-Dimethylpentane is the most resistant to biodegradation in branched C6–C7 alkanes. Furthermore, the 2-methylpentane/3-methylpentane and 2-methylhexane/3-methylhexane ratios decreased steadily with increasing biodegradation, which implies that isomers of bilateral methyl groups are more prone to bacterial attack relative to mid-chain isomers. The position of the alkyls on the carbon skeleton is also one of the critical factors controlling the rate of biodegradation. With increasing biodegradation, Mango’s LH parameters K1 values decrease and K2 values increase, the values of n-heptane and isoheptane decrease, and the indices of methylcyclohexane and cyclohexane increase. LH parameters should be applied cautiously for the biodegraded oils. Because biodegraded samples belong to slight or minor biodegraded oils, the values of n-heptane and isoheptane from Dawanqi Oilfield can better reflect and determine the “Biodegraded” zone. When the heptane value is 0–21 and the isoheptane value is 0–2.6, the crude oil in Dawanqi Oilfield is defined as the “Biodegraded” zone. 相似文献
5.
Experimental studies of the effects of thermochemical sulfate reduction (TSR) on light hydrocarbons were conducted in sealed gold tubes for 72 h at 400 °C and 50 MPa. A variety of pyrolysis experiments were carried out, including anhydrous, hydrous without MgSO4 (hydrous experiments) and hydrous with MgSO4 (TSR experiments). Common reservoir minerals including montmorillonite, illite, calcite and quartz were added to various experiments. Measurements of the quantities of n-C9+ normal alkanes (high molecular weight, HMW), n-C6-8 normal alkanes (low molecular weight, LMW), C7-8 isoalkanes, C6-7 cycloalkanes and C6-9 monoaromatics and compound specific carbon isotope analyses were made. The results indicate that TSR decreases hydrocarbon thermal stability significantly as indicated by chemically lower concentrations and isotopically heavier LMW saturated hydrocarbons in the TSR experiments compared to the hydrous and anhydrous experiments. In the LMW saturated hydrocarbon fraction, cycloalkanes tend to be more resistant to TSR than n-alkanes and isoalkanes. TSR promotes aromatization reactions and favors the generation of monoaromatics, resulting in higher chemical concentrations and isotopically equivalent compositions of monoaromatics in the anhydrous, hydrous and TSR experiments. This indicates that LMW monoaromatics are thermally stable during the pyrolysis experiments. Acid rather than basic catalyzed ionic reactions probably play a major role in TSR. This is suggested by the promotion effects of acid-clay minerals including illite and particularly montmorillonite. The basic mineral calcite retards the destruction of n-C9+ normal alkanes within the TSR experiments. Furthermore, clay minerals have a minor influence on the generation of LMW monoaromatics and play a negative role in regulating the concentrations of LMW saturated hydrocarbons; calcite does not favor the generation of LMW monoaromatics and plays a positive role in controlling the concentrations of LMW saturates relative to clay minerals. Quartz has a negligible role in the TSR experiments.Due to their differential responses to TSR, LMW hydrocarbon parameters, such as Schaefer [Schaefer, R.G., Littke, R., 1988. Maturity-related compositional changes in the low-molecular-weight hydrocarbon fraction of Toarcian Shale. Organic Geochemistry 13, 887-892], Thompson [Thompson, K.F.M., 1988. Gas-condensate migration and oil fractionation in deltaic systems. Marine and Petroleum Geology 5, 237-246], Halpern [Halpern, H., 1995. Development and application of light-hydrocarbon-based star diagrams. American Association of Petroleum Geologists Bulletin 79, 801-815] and Mango [Mango, F.D., 1997. The light hydrocarbons in petroleum: a critical review. Organic Geochemistry 26, 417-440] parameters and stable carbon isotopic compositions of individual LMW saturated hydrocarbons in TSR affected oils should be used with caution. In addition, water promotes thermal cracking of n-C9+ normal alkanes and favors the generation of LMW cycloalkanes and monoaromatics. The result is lower concentrations of n-C9+ HMW normal alkanes and higher concentrations of LMW cycloalkanes and monoaromatics in hydrous experiments relative to anhydrous experiments with or without minerals.This investigation provides a better understanding of the effects of TSR on LMW hydrocarbons and the influence of reservoir minerals on TSR in natural systems. The paper shows how LMW hydrocarbon indicators in TSR altered oils improve understanding of the processes of hydrocarbon generation, migration and secondary alteration in subsurface petroleum reservoirs. 相似文献
6.
Compound-specific isotope analysis has become an important tool in environmental studies and is an especially powerful way to evaluate biodegradation of hydrocarbons. Here, carbon isotope ratios of light hydrocarbons were used to characterise in-reservoir biodegradation in the Gullfaks oil field, offshore Norway. Increasing biodegradation, as characterised, for example, by increasing concentration ratios of Pr/n-C17 and Ph/n-C18, and decreasing concentrations of individual light hydrocarbons were correlated to 13C-enrichment of the light hydrocarbons. The δ13C values of C4 to C9n-alkanes increase by 7-3‰ within the six oil samples from the Brent Group of the Gullfaks oil field, slight changes (1-3‰) being observed for several branched alkanes and benzene, whereas no change (<1‰) in δ13C occurs for cyclohexane, methylcyclohexane, and toluene. Application of the Rayleigh equation demonstrated high to fair correlation of concentration and isotope data of i- and n-pentane, n-hexane, and n-heptane, documenting that biodegradation in reservoirs can be described by the Rayleigh model. Using the appropriate isotope fractionation factor of n-hexane, derived from laboratory experiments, quantification of the loss of this petroleum constituent due to biodegradation is possible. Toluene, which is known to be highly susceptible to biodegradation, is not degraded within the Gullfaks oil field, implying that the local microbial community exhibits rather pronounced substrate specificities. The evaluation of combined molecular and isotopic data expands our understanding of the anaerobic degradation processes within this oil field and provides insight into the degradative capabilities of the microorganisms. Additionally, isotope analysis of unbiodegraded to slightly biodegraded crude oils from several oil fields surrounding Gullfaks illustrates the heterogeneity in isotopic composition of the light hydrocarbons due to source effects. This indicates that both source and also maturity effects have to be well constrained when using compound-specific isotope analysis for the assessment of biodegradation. 相似文献
7.
The free, adsorbed and inclusion oils were recovered by sequential extraction from eleven oil and tar containing reservoir rocks in the Tazhong Uplift of Tarim Basin. The results of gas chromatography (GC) and GC–mass spectrometry analyses of these oil components and seven crude oils collected from this region reveal multiple oil charges derived from different source rocks for these oil reservoirs. The initially charged oils show strong predominance of even over odd n-alkanes in the range n-C12 to n-C20 and have ordinary maturities, while the later charged oils do not exhibit any predominance of n-alkanes and have high maturities. The adsorbed and inclusion oils of the reservoir rocks generally have high relative concentrations of gammacerane and C28 steranes, similar to the Cambrian-Lower Ordovician source rocks. In contrast, the free oils of these reservoir rocks generally have low relative concentrations of gammacerane and C28 steranes, similar to the Middle-Upper Ordovician source rocks. There are two interpretations of this result: (1) the initially charged oils are derived from the Cambrian-Lower Ordovician source rocks while the later charged oils are derived from the Middle-Upper Ordovician source rocks; and (2) both the initially and later charged oils are mainly derived from the Cambrian-Lower Ordovician source rocks but the later charged oils are contaminated by the oil components from the Silurian tar sandstones and the Middle-Upper Ordovician source rocks. 相似文献
8.
We present a systematic study of chain-length distributions and D/H ratios of n-alkyl lipids (both n-alkanes and n-alkanoic acids) in a wide range of terrestrial and aquatic plants around and in Blood Pond, Massachusetts, USA. The primary goal is to establish a model to quantitatively assess the aquatic plant inputs of the mid-chain length n-alkyl lipids to lake sediments and to determine the average hydrogen isotopic ratios of these lipids in different plants. Our results show that middle-chain n-alkyl lipids (C21-C23n-alkanes and C20-C24n-alkanoic acids) are exceptionally abundant in floating and submerged aquatic plants, in contrast to the dominance of long-chain n-alkyl lipids (C27-C31n-alkanes and C26-C32n-alkanoic acids) in other plant types, which are consistent with previously published data from Mountain Kenya and the Tibetan Plateau. Combining available data in different environmental settings allows us to establish statistically robust model distributions of n-alkyl lipids in floating/submerged macrophytes relative to other plant types. Based on the model distributions, we established a multi-source mixing model using a linear algebra approach, in order to quantify the aquatic inputs of mid-chain n-alkyl lipids in lake sediments. The results show that ∼97% of the mid-chain n-alkyl lipids (C23n-alkane and C22n-acid (behenic acid)) in Blood Pond sediments are derived from floating and submerged macrophytes. In addition, D/H ratios of C22n-acid and C23n-alkane in the floating and submerged plants from Blood Pond display relatively narrow ranges of variation (−161 ± 16‰ and −183 ± 18‰, respectively). Our study demonstrates that mid-chain n-alkyl lipids such as C23n-alkane and C22n-acid could be excellent recorders of past lake water isotopic ratios in lakes with abundant floating and submerged macrophyte inputs. 相似文献
9.
Graham A. Logan Michael A. Abrams Nicola F. Dahdah Emmanuelle Grosjean 《Organic Geochemistry》2009,40(3):365-375
A laboratory study has been conducted to determine the best methods for the detection of C10–C40 hydrocarbons at naturally occurring oil seeps in marine sediments. The results indicate that a commercially available method using n-C6 to extract sediments and gas chromatography–flame ionization detection (GC–FID) to screen the resulting extract is effective at recognizing the presence of migrated hydrocarbons at concentrations from 50 to 5000 ppm. When non-biodegraded, the amount of oil charge is effectively tracked by the sum of n-alkanes in the gas chromatogram. However, once the charge oil becomes biodegraded, with the loss of n-alkanes and isoprenoids, the amount of oil is tracked by the quantification of the unresolved complex mixture (UCM). Gas chromatography–mass spectrometry (GC–MS) was also found to be very effective for the recognition of petroleum related hydrocarbons and results indicate that GC–MS would be a very effective tool for screening samples at concentrations below 50 ppm oil charge. 相似文献
10.
Michael Zech Nikolai Pedentchouk Katharina Leiber Slobodan B. Markovi? 《Geochimica et cosmochimica acta》2011,75(17):4917-4928
During the last decade, compound-specific hydrogen isotope analysis of plant leaf-wax and sedimentary n-alkyl lipids has become a promising tool for paleohydrological reconstructions. However, with the exception of several previous studies, there is a lack of knowledge regarding possible effects of early diagenesis on the δD values of n-alkanes. We therefore investigated the n-alkane patterns and δD values of long-chain n-alkanes from three different C3 higher plant species (Acer pseudoplatanus L., Fagus sylvatica L. and Sorbus aucuparia L.) that have been degraded in a field leaf litterbag experiment for 27 months.We found that after an initial increase of long-chain n-alkane masses (up to ∼50%), decomposition took place with mean turnover times of 11.7 months. Intermittently, the masses of mid-chain n-alkanes increased significantly during periods of highest total mass losses. Furthermore, initially high odd-over-even predominances (OEP) declined and long-chain n-alkane ratios like n-C31/C27 and n-C31/C29 started to converge to the value of 1. While bulk leaf litter became systematically D-enriched especially during summer seasons (by ∼8‰ on average over 27 months), the δD values of long-chain n-alkanes reveal no systematic overall shifts, but seasonal variations of up to 25‰ (Fagus, n-C27, average ∼13‰).Although a partly contribution by leaf-wax n-alkanes by throughfall cannot be excluded, these findings suggest that a microbial n-alkane pool sensitive to seasonal variations of soil water δD rapidly builds up. We propose a conceptual model based on an isotope mass balance calculation that accounts for the decomposition of plant-derived n-alkanes and the build-up of microbial n-alkanes. Model results are in good agreement with measured n-alkane δD results. Since microbial ‘contamination’ is not necessarily discernible from n-alkane concentration patterns alone, care may have to be taken not to over-interpret δD values of sedimentary n-alkanes. Furthermore, since leaf-water is generally D-enriched compared to soil and lake waters, soil and water microbial n-alkane pools may help explain why soil and sediment n-alkanes are D-depleted compared to leaves. 相似文献
11.
Zhiguo Rao Zhaoyu Zhu Guodong Jia Andrew C.G. Henderson Qian Xue Suping Wang 《Organic Geochemistry》2009,40(8):922-930
The stable carbon and hydrogen isotope composition of higher plant-derived long chain n-alkanes (δ13Cn-alkanes and δDn-alkanes) from 45 surface soil samples (within well characterized vegetation zones) from eastern China (18°N–50°N) are reported. The weighted average δDn-alkanes value for n-C27, n-C29 and n-C31 in the samples and the annual average δD of meteoric water recorded at 12 weather stations proximal to the sampling sites show similar spatial variations. The δD of n-alkanes shows a gradual depletion in value with increasing latitude. The results demonstrate that, on a large spatial scale, the δD values of long chain n-alkanes derived from higher plants have the potential to record the δD of meteoric water, although many other factors can also influence the isotope values. There appears to be no apparent relationship between the δD of the n-alkanes extracted from the surface soil and the overlying vegetation type (i.e. forest/grassland or C3/C4 composition). Therefore, palaeoenvironmental studies utilizing δDn-alkanes from higher plant-derived material in geological samples have the potential to provide additional information with regard to the past hydrological cycle. 相似文献
12.
Distributions of n-alkanes and their hydrogen isotopic composition in plants from Lake Qinghai (China) and the surrounding area 总被引：1，自引：0，他引：1
Various aquatic plants from Lake Qinghai, the largest inland saline lake in China, and terrestrial plants from the surrounding area were investigated for the distribution of n-alkanes and their δD values. The n-alkanes in the samples range from C15 to C33 with C preference index (CPI) values of 4.0–29.7. The n-C23 or n-C25 alkane is the dominant compound in the aquatic submerged plants. The aquatic emergent and terrestrial plants have an abundance maximum at n-C27, n-C29 or n-C31. The average chain length (ACL) values, ranging from 26.0 to 29.6, are closely related to the plant species. The n-alkanes from the aquatic plants have mean δD values of −169‰ to −121‰ and those from the terrestrial plants values of −173‰ to −109‰. The H isotopic composition (δD) and fractionation differ significantly among the plants studied. Comparison shows that additional evaporative enrichment of the lake water associated with saline lakes and humidity influence the δD values of the n-alkanes in aquatic and terrestrial plants, respectively. The mean δD values of n-alkanes in the plants decrease with increasing ACL value. The n-alkanes from the different types of plants are more depleted in D relative to environmental water and those from aquatic plants (with a mean value of −143‰) have a greater isotopic fractionation than terrestrial plants (mean value −113‰). 相似文献
13.
《Applied Geochemistry》1998,13(7):851-859
Emerging acceptance of the limitations of separate phase product recovery has spawned interest in the intrinsic alteration of residual separate phase petroleum products. In this study the geochemical changes in a continuous core through soil containing a separate phase diesel fuel #2 (SPD) in contact with groundwater are investigated. Chemical heterogeneities are shown to exist which can be attributed to weathering, particularly intrinsic biodegradation. The results show that the aliphatic hydrocarbon content is reduced and the δ13C ratio of the aliphatic hydrocarbons increased from top to bottom in the core. Both changes are thought to be due to preferential biodegradation of (isotopically lighter) n-alkanes. A slight increase in the relative abundance of shorter chain n-alkanes (<n-C17) was also observed. The distribution of the dominant aromatic hydrocarbons (C0–C3 alkyl-naphthalenes) is remarkably consistent throughout the core, although naphthalene is depleted below the oil–water interface. In spite of low oil saturation (S0), little or no evidence of biodegradation is noted at the uppermost boundary of the SPD. However, intrinsic biodegradation is evident approximately 0.3 m above the oil–water interface in spite of higher S0. The extent of the chemical changes attributable to biodegradation (described above) gradually increases below the oil–water interface, eventually reaching a maximum at the bottom of the SPD profile (∼1.2 m below the interface) where S0 is again reduced. The relatively higher level of biodegradation observed at and below the oil–water interface may be attributed to the reduced S0 in this zone. An estimate of the mass reduction in diesel fuel between the uppermost and bottommost parts of the core is calculated to be 23% (by weight), due predominantly to the biodegradation of n-alkanes. 相似文献
14.
Biodegraded oils are widely distributed in the Liaohe basin, China. In order to develop effective oil-source correlation tools specifically for the biodegraded oils, carbon isotopic compositions of individual n-alkanes from crude oils and their asphaltene pyrolysates have been determined using the gas chromatography–isotope ratio mass spectrometry technique. No significant fractionation in the stable carbon isotopic ratios of n-alkanes in the pyrolysates of oil asphaltenes was found for anhydrous pyrolysis carried out at temperatures below 340°C. This suggests that the stable carbon isotopic distribution of n-alkanes (particularly in the C16–C29 range) in the asphaltene pyrolysates can be used as a correlation tool for severely biodegraded oils from the Liaohe Basin. Comparison of the n-alkane isotopic compositions of the oils with those of asphaltene pyrolysates shows that this is a viable method for the differentiation of organic facies variation and post-generation alterations. 相似文献
15.
S. Aboglila K. Grice K. Trinajstic D. Dawson K.H. Williford 《Organic Geochemistry》2010,41(12):1249-1258
Biomarker ratios, together with stable carbon (δ13C) and hydrogen (δD) isotopic compositions of individual hydrocarbons have been determined in a suite of crude oils (n = 24) from the East Sirte Basin to delineate their sources and respective thermal maturity. The crude oil samples are divided into two main families (A and B) based on differences in source inputs and thermal maturity. Using source specific parameters including pristane/phytane (Pr/Ph), hopane/sterane, dibenzothiophene/phenanthrene (DBT/P), Pr/n-C17 and Ph/n-Cl8 ratios and the distributions of tricyclic and tetracyclic terpanes, family B oils are ascribed a marine source rock deposited under sub-oxic conditions, while family A oils have a more terrigenous source affinity. This genetic classification is supported by the stable carbon isotopic compositions (δ13C) of the n-alkanes. Using biomarker maturity parameters such as the abundance of Pr and Ph relative to n-alkanes and the distribution of sterane and hopane isomers, family A oils are shown to be more thermally mature than family B oils. The contrasting maturity of the two families is supported by differences between the stable hydrogen isotopic compositions (δD) of Pr and Ph and the n-alkanes, as well as the δ13C values of n-alkanes in their respective oils. 相似文献
16.
A consequence of the biodegradation of petroleum is that lower molecular weight compounds are removed preferentially to higher molecular weight (HMW) compounds greater than triacontane (n-C30). The extent to which the latter compounds are biodegraded has rarely been studied. Reasons for this include the technical difficulties associated with carrying out biodegradability tests with solid, water-insoluble substances and the limits of the analytical techniques, such as gas chromatography (GC).A quantitative high temperature GC (HTGC) method was developed to monitor the biodegradation of the aliphatic fraction of a waxy Indonesian oil by Pseudomonas fluorescens. Recoveries of over 90% were obtained for n-alkanes up to hexacontane (C60) using liquid-liquid continuous extraction. After only 14 days, 80% of the aliphatic hydrocarbons had been degraded. At the end of the 136-day study, 14% of the original fraction remained. This comprised mainly C40+ compounds. No decrease in the concentrations of compounds above C45 was observed. However, the use of a rapid screening biodegradation method provided tentative proof that Pseudomonas fluorescens was capable of utilising n-alkanes up to C60 once the bacteria had acclimated to HMW alkanes. 相似文献
17.
Simon C George Christopher J Boreham Sandra A Minifie Stan C Teerman 《Organic Geochemistry》2002,33(12)
A suite of 18 oils from the Barrow Island oilfield, Australia, and a non-biodegraded reference oil have been analysed compositionally in order to detail the effect of minor to moderate biodegradation on C5 to C9 hydrocarbons. Carbon isotopic data for individual low molecular weight hydrocarbons were also obtained for six of the oils. The Barrow Island oils came from different production wells, reservoir horizons, and compartments, but have a common source (the Upper Jurassic Dingo Claystone Formation), with some organo-facies differences. Hydrocarbon ratios based on hopanes, steranes, alkylnaphthalenes and alkylphenanthrenes indicate thermal maturities of about 0.8% Rc for most of the oils. The co-occurrence in all the oils of relatively high amounts of 25-norhopanes with C5 to C9 hydrocarbons, aromatic hydrocarbons and cyclic alkanes implies that the oils are the result of multiple charging, with a heavily biodegraded charge being overprinted by fresher and more pristine oil. The later oil charge was itself variably biodegraded, leading to significant compositional variations across the oilfield, which help delineate compartmentalisation. Biodegradation resulted in strong depletion of n-alkanes (>95%) from most of the oils. Benzene and toluene were partially or completely removed from the Barrow Island oils by water washing. However, hydrocarbons with lower water solubility were either not affected by water washing, or water washing had only a minor effect. There are three main controls on the susceptibility to biodegradation of cyclic, branched and aromatic low molecular weight hydrocarbons: carbon skeleton, degree of alkylation, and position of alkylation. Firstly, ring preference ratios at C6 and C7 show that isoalkanes are retained preferentially relative to alkylcyclohexanes, and to some extent alkylcyclopentanes. Dimethylpentanes are substantially more resistant to biodegradation than most dimethylcyclopentanes, but methylhexanes are depleted faster than methylpentanes and dimethylcyclopentanes. For C8 and C9 hydrocarbons, alkylcyclohexanes are more resistant to biodegradation than linear alkanes. Secondly, there is a trend of lower susceptibility to biodegradation with greater alkyl substitution for isoalkanes, alkylcyclohexanes, alkylcyclopentanes and alkylbenzenes. Thirdly, the position of alkylation has a strong control, with adjacent methyl groups reducing the susceptibility of an isomer to biodegradation. 1,2,3-Trimethylbenzene is the most resistant of the C3 alkylbenzene isomers during moderate biodegradation. 2-Methylalkanes are the most susceptible branched alkanes to biodegradation, 3-methylalkanes are the most resistant and 4-methylalkanes have intermediate resistance. Therefore, terminal methyl groups are more prone to bacterial attack compared to mid-chain isomers, and C3 carbon chains are more readily utilised than C2 carbon chains. 1,1-Dimethylcyclopentane and 1,1-dimethylcyclohexane are the most resistant of the alkylcyclohexanes and alkylcyclopentanes to biodegradation. The straight-chained and branched C5–C9 alkanes are isotopically light (depleted in 13C) relative to cycloalkanes and aromatic hydrocarbons. The effects of biodegradation consistently lead to enrichment in 13C for each remaining hydrocarbon, due to preferential removal of 12C. Differences in the rates of biodegradation of low molecular weight hydrocarbons shown by compositional data are also reflected in the level of enrichment in 13C. The carbon isotopic effects of biodegradation show a decreasing level of isotopic enrichments in 13C with increasing molecular weight. This suggests that the kinetic isotope effect associated with biodegradation is site-specific and often related to a terminal carbon, where its impact on the isotopic composition becomes progressively ‘diluted’ with increasing carbon number. 相似文献
18.
Nikolai Pedentchouk 《Geochimica et cosmochimica acta》2006,70(8):2063-2072
This study investigates the extent of post-depositional alteration of δD values of n-alkyl lipids, isoprenoids, and kerogen isolated from a continuous 450 m core that covers the transition from thermally immature to early mature sediments in the lacustrine Kissenda Formation, Lower Cretaceous, Gabon Basin. Large variations in δD values (up to 40‰ for nC17 and up to 30‰ for nC29 alkanes as well as up to 10‰ for kerogen) in closely spaced samples are evident throughout the core and remain preserved even at the bottom of the section. δD values of individual n-alkanes show a slight overall D-enrichment with depth, and a general trend of increasing δD values with increasing n-alkane chain length characterizes all samples, particularly in those below 600 m depth. Hydrogen isotopic compositions of kerogen samples overlap with those of n-alkanes throughout the section. δD values of pristane and phytane are more negative than those of nC17 alkane by as much as 120‰ at shallow depths but increase dramatically and approach δD values of nC17 alkane in the samples closest to the oil window. Integration of analytical and computational results indicates that: (1) n-alkanes and isoprenoids have the potential to preserve the original biological signal before the onset of oil generation; (2) isomeric and structural rearrangements taking place at the beginning stages of oil generation do not influence significantly the δD values of n-alkanes and kerogen. However, these processes have a major effect on the isotopic composition of isoprenoids, causing isotopic D-enrichment up to 90‰. 相似文献
19.
China has a number of petroliferous lacustrine sedimentary basins of varying salinity and age (mainly Eocene). A geochemical investigation has been undertaken on several oils and source rocks from the Eocene lacustrine Biyang Basin. The distributions of n-alkanes, isoprenoids, steranes, and terpanes have been studied and used to characterize the sedimentary environment of deposition, maturity, biodegradation and undertake possible correlations. The ratios of C30-hopane/gammacerane, 4-methyl-steranes/regular steranes, steranes/hopanes, C21 tricyclic/C30 hopane are proposed to be indicative of the depositional environment whereas ß-carotane appears to be a source related indicator. The geochemical data obtained in this study suggest that the major source rocks in the Biyang Basin were deposited in a saline/hypersaline depositional environment. 相似文献
20.
Hydrogen isotopic composition of n-alkanes was measured in sediments from an excavated profile of the Early Cretaceous Yixian Formation in Liaoning Province, NE China, aiming to assess the significance of the δD value of n-alkanes in ancient lacustrine sediments as the indicator for determining the source inputs of organic matters and paleoclimatic conditions. The δD values of n-alkanes are in the range of − 250‰ to − 85‰ and display an obvious three-stage variation pattern through the profile, which is consistent with the distribution of the dominated n-alkanes and the profile of their δ13C values. The δD and δ13C values of n-alkanes suggest that short-chain n-alkanes are primarily derived from photosynthetic bacteria and algae; n-C29 and n-C31 are mainly originated from terrestrial higher plants; n-C28 and n-C30 may be derived from the same precursor but via the different biological mechanism of hydrogen isotopic fractionation; while the source inputs of medium-chain n-alkanes are more complicated, with n-C23 being derived from some specific algae or biosynthesized by various aquatic organisms. The paleoclimatic conditions are reconstructed via two approaches. The reconstructed hydrogen isotopic values of lake water and meteoric water (expressed as δDLW and δDMW, respectively) were at the intervals of − 51.8‰ to 17.0‰ and − 118.1‰ to − 43.5‰, respectively, indicating a general climate transition from semi-arid to arid. The calculated ΔδDLW-MW values vary from 37.0‰ to 89.1‰ and display a similar but a significant large-scale variation trend with the ΔδDC23 ‐ long (− 28.8‰ to 85.0‰; long represents long-chain n-alkanes) and ΔδDmid-long (− 15.4‰ to 43.4‰; mid represents medium-chain n-alkanes) values. The discrepancy may be attributed to the source input overlap for n-alkanes and the uncertainties of εwater/lipid values. The coupling of ΔδDC23 ‐ long, ΔδDmid-long and ΔδDLW-MW values with the paleoclimatic evidence indicates that the δD values of n-alkanes could be more sensitive to the change of paleoclimatic conditions. 相似文献