共查询到20条相似文献，搜索用时 62 毫秒
1.
In this paper, a numerical model is established for estimating the wave forces on a submerged horizontal circular cylinder. For predicting the wave motion, a set of two-dimensional Navier-Stokes equations is solved numerically with a finite element method. In order to track the moving non-linear wave surface boundary, the Navier-Stokes equations are discretized in a moving mesh system. After each computational time step, the mesh is modified according to the changed wave surface boundary. In order to stabilize the numerical procedure, a three-step finite element method is applied in the time integration. The water sloshing in a tank and wave propagation over a submerged bar are simulated for the first time to validate the present model. The computational results agree well with the analytical solution and the experimental data.Finally, the model is applied to the simulation of interaction between waves and a submerged horizontal circular cylinder.The effects of the KC number and the cylinder depth on the wave forces are studied. 相似文献
2.
A numerical model is developed for estimation of local scour around a large circular cylinder under vvave action. The model includes wave diffraction around structures, bed shear stress calculation inside the vvave boundary layer and topo-graphical change model. The vvave model is based on the improved Boussinesq equations for varying depth. The vvave boundary layer is calculaled by solving the integrated momentum equation over the boundary layer. The bed shear stress due to streaming, an important factor affecting the sediment transport around a large-scale cylinder, is calculated. The Lagrangian drift velocity is included in calculation of the suspended sediment transport rates. The model is implemented by a finite element method and the results from the present model, which agree well with experimental data, are com-pared vvith those from other methods. 相似文献
3.
The interaction of a solitary wave with an array of surface-piercing vertical circular cylinders is investigated numerically. The wave motion is modeled by a set of generalized Boussinesq equations. The governing equations are discretized using a finite element method. The numerical model is validated against the experimental data of solitary wave reflection from a vertical wall and solitary wave scattering by a vertical circular cylinder respectively. The predicted wave surface elevation and the wave forces on the cylinder agree well with the experimental data. The numerical model is then employed to study solitary wave scattering by arrays of two circular cylinders and four circular cylinders respectively. The effect of wave direction on the wave forces and the wave runup on the cylinders is quantified. 相似文献
4.
Numerical Simulation of Local Scour Around A Large Circular Cylinder Under Wave Action 总被引：1，自引：0，他引：1
A horizontal two- dimensional numerical model is developed for estimation of sediment transport and sea bed change around a large circular cylinder under wave action. The wave model is based on an elliptic mild slope equation. The wave-induced current by the gradient of radiation stress is considered and a depth integrated shallow water equation is applied to the calculation of the current. The mass transport velocity and the bed shear stress due to streaming are considered, which are important factors affecting the sediment transport around a structure due to waves, especially in reflective areas. Wave-current interaction is taken into account in the model for computing the bed shear stress. The model is implemented by a finite element method. The results of this model are compared with those from other methods and agree well with experimental data. 相似文献
5.
The incompressible viscous shear flow past a circular cylinder is analyzed by solving two-dimensional Navier-Stokes equations and pressure Poisson equation using a finite difference method. The shear flow is calculated for Reynolds numbers from 80 to 1000, and shear parameters up to 0.25. The numerical results indicate that the vortex shedding persists at the shear parameters up to 0.25 for the present Reynolds number range. The Strouhal number and the drag coefficient decrease as the shear parameter increases. There is a transverse force acting from the high velocity side toward the low velocity side in the shear flow. 相似文献
6.
In order to solve unsteady incompressible Navier–Stokes(N–S) equations, a new stabilized finite element method,called the viscous-splitting least square FEM, is proposed. In the model, the N–S equations are split into diffusive and convective parts in each time step. The diffusive part is discretized by the backward difference method in time and discretized by the standard Galerkin method in space. The convective part is a first-order nonlinear equation.After the linearization of the nonlinear part by Newton's method, the convective part is also discretized by the backward difference method in time and discretized by least square scheme in space. C~0-type element can be used for interpolation of the velocity and pressure in the present model. Driven cavity flow and flow past a circular cylinder are conducted to validate the present model. Numerical results agree with previous numerical results, and the model has high accuracy and can be used to simulate problems with complex geometry. 相似文献
7.
8.
《Applied Ocean Research》2004,26(3-4):147-153
A numerical study of the effect of the width of the computational domain on viscous oscillatory flow past a circular cylinder has been conducted, for Keulegan–Carpenter numbers ranging between 0.1 and 6 at a fixed frequency parameter equal to 50. The finite element method was used for the solution of the Navier–Stokes equations, in the formulation where the stream function and the vorticity are the field variables. Simulations for blockage ratios in the range between 0.10 and 0.50 were performed assuming frictionless flow at the outer boundaries, the blockage ratio being defined as the cylinder diameter divided by the width of the solution domain. The first set of simulations was carried out for a constant stream function along the horizontal boundaries. Then the procedure was repeated, for stream function values at the outer boundaries derived from the irrotational solution around a circular cylinder. This boundary condition relieves considerably the blockage effect on the flow pattern and on the drag coefficient of the in-line force. 相似文献
9.
为了研究斜向入射波浪,基于三维不可压缩两相流模型,开发了一套圆形数值波浪水池数值模型。在圆形波浪水池中,通过源项造波法成功生成了任意入射方向的波浪,并且利用人工摩擦项模拟阻尼区以数值耗散反射波浪。模型基于嵌入式多块网格体系,采用FVM法(finite volume method)离散Navier-Stokes方程,VOF法(volume of fluid)追踪自由水面。试验结果表明,斜向入射波浪的模拟结果与理论值基本一致,圆形波浪水池在模拟斜向入射波浪时,有效区域的面积较传统波浪水池显著增大,而且有效区域受波浪入射角度的影响也较小。同时,通过叠加多列斜向入射波浪,模拟出了多向交叉波列,并通过与理论结果对比,发现其具有较高的精度。 相似文献
10.
为了能够精确地拟合天然水域不规则的水陆边界,并能保持有限差分数值计算在矩形网格中进行,本文利用Thompson的数值网格生成技术,在长江口南支七丫口至横沙河段设计了一个椭圆型边界拟合坐标系,并在这个坐标系下建立了平面二维潮流数学模型。通过数值求解此数学模型,实现了计算区域内现状潮流的一个数值模拟,模拟结果表明,模式的设计是成功的。 相似文献
11.
Numerical simulations are carried out for wave action on a submerged horizontal circular cylinder by means of a viscous fluid model, and it is focused on the examination of the discrepancies between the viscous fluid results and the potential flow solutions. It is found that the lift force resulted from rotational flow on the circular cylinder is always in anti-phase with the inertia force and induces the discrepancies between the results. The influence factors on the magnitude of the lift force, especially the correlation between the stagnation-point position and the wave amplitude, and the effect of the vortex shedding are investigated by further examination on the flow fields around the cylinder. The viscous numerical calculations at different wave frequencies showed that the wave frequency has also significant influence on the wave forces. Under higher frequency and larger amplitude wave action, vortex shedding from the circular cylinder will appear and influence the wave forces on the cylinder substantially. 相似文献
12.
A finite element model is established for simulating flow in and out a porous media. The extended Darcy equation inside the porous media and the Navier–Stokes equations in the fluid are coupled via the continuity condition at the interface between the two media. The model is firstly validated against the analytical and the numerical results available in literature. Then it is applied to simulate flow past a circular cylinder covered by a porous layer. The effect of the porous layer on the reduction of lift coefficient is investigated numerically. It is found that the lift reduction can be achieved by properly choosing the porous material. However, the amount of reduction greatly depends on the Reynolds number, the permeability and the Forchheimer coefficient. 相似文献
13.
A numerical model for coastal water wave motion that includes an effective method for treatment of non-reflecting boundaries is presented. The second-order one-way wave equation to approximate the non-reflecting boundary condition is found to be excellent and it ensures a very low level of reflection for waves approaching the boundary at a fairly wide range of the incidence angle. If the Newman approximation is adopted, the resulting boundary condition has a unique property to allow the free propagation of wave components along the boundary. The study is also based on a newly derived mild-slope wave equation system that can be easily made compatible to the one-way wave equation. The equation system is theoretically more accurate than the previous equations in terms of the mild-slope assumption. The finite difference method defined on a staggered grid is employed to solve the basic equations and to implement the non-reflecting boundary condition. For verification, the numerical model is then applied to three coastal water wave problems including the classical problem of plane wave diffraction by a vertical circular cylinder, the problem of combined wave diffraction and refraction over a submerged hump in the open sea, and the wave deformation around a detached breakwater. In all cases, the numerical results are demonstrated to agree very well with the relevant analytical solutions or with experimental data. It is thus concluded that the numerical model proposed in this study is effective and advantageous. 相似文献
14.
低雷诺数下圆柱涡激振动的二维有限元数值模拟 总被引：2，自引：0，他引：2
采用有限元方法求解原始变量的二维不可压粘性流体的N-S方程,计算了雷诺数从90到150范围内圆柱绕流引起的涡激振动,完整地再现了流固耦合系统从不共振到频率锁定,再到脱离锁定的过程,成功地预测到了涡激振动的“拍”和“锁定”现象,并与A nagnostopou los和B earam an的试验结果进行了比较。计算涡激振动时用ALE方法分析圆柱和流体的耦合作用,圆柱振动被简化为质量-弹簧-阻尼系统。 相似文献
15.
In this study, the Navier-Stokes equations and the pressure Poisson equation for two-dimensional time-dependent viscous flows are solved with a finite difference method in a curvilinear coordinate system. With this numerical procedure, the vortex shedding flow past a circular cylinder near a wall is investigated. The flow is calculated for a broad range of gap ratios for different Reynolds numbers ranging from 80 to 1000. Based on the numerical solutions, the vortex shedding is observed using various methods, and the mechanism for the vortex shedding suppression at small gap ratios is analyzed. The critical gap ratio at which the vortex shedding is suppressed is identified at different Reynolds numbers. 相似文献
16.
近壁圆柱绕流水动力特性数值模拟与实验研究 总被引：3，自引：0，他引：3
通过数值模拟和物理模型实验,对距壁面一定高度的圆柱绕流水动力特性进行了研究。数值模拟采用有限体积法对标准k-ε模式方程进行离散,采用SIMPLE算法进行求解,模拟绕流流场。在物理模型实验中,将PVC圆管制作的实验模型安放在水槽内,在圆管的跨中沿表面周向均匀布置水下压力传感器,用于测量绕流圆柱体表面动水压力分布。通过改变Re数和间隙比来分析它们对近壁圆柱绕流水动力特性的影响。基于数值流动显示技术,给出了近壁绕流流场的尾流流态分析。通过数值结果与实验结果的对比,对近壁绕流圆柱体的升力系数及其表面动水压力分布进行了研究,对比结果显示了较好的一致性。 相似文献
17.
A numerical study based on a wake oscillator model was conducted to determine the response performance of vortex-induced vibration(VIV) on a long flexible cylinder with pinned-pinned boundary conditions subjected to linear and exponential shear flows. The coupling equations of a structural vibration model and wake oscillator model were solved using a standard central finite difference method of the second order. The VIV response characteristics including the structural displacement, structural frequency, structural wavenumber, standing wave behavior,travelling wave behavior, structural velocity, lift force coefficient and transferred energy from the fluid to the structure with different flow profiles were compared. The numerical results show that the VIV displacement is a combination of standing waves and travelling waves. For linear shear flow, standing waves and travelling waves dominate the VIV response within the low-velocity and high-velocity zones, respectively. The negative values of the transferred energy only occur within the low-velocity zone. However, for exponential shear flow, travelling waves dominate the VIV response and the negative energy occurs along the entire length of the cylinder. 相似文献
18.
The behavior of a highly deformable membrane to ocean waves was studied by coupling a nonlinear boundary element model of the fluid domain to a nonlinear finite element model of the membrane. The hydrodynamic loadings induced by water waves are computed assuming large body hydrodynamics and ideal fluid flow and then solving the transient diffraction/radiation problem. Either linear waves or finite amplitude waves can be assumed in the model and thus the nonlinear kinematic and dynamic free surface boundary conditions are solved iteratively. The nonlinear nature of the boundary condition requires a time domain solution. To implicitly include time in the governing field equation, Volterra's method was used. The approach is the same as the typical boundary element method for a fluid domain where the governing field equation is the starting point. The difference is that in Volterra's method the time derivative of the governing field equation becomes the starting point.The boundary element model was then coupled through an iterative process to a finite element model of membrane structures. The coupled model predicts the nonlinear interaction of nonlinear water waves with highly deformable bodies. To verify the coupled model a large scale test was conducted in the OH Hinsdale wave Research Laboratory at Oregon State University on a 3-ft-diameter fabric cylinder submerged in the wave tank. The model data verified the numerical prediction of the structure displacements and of the changes in the wave field.The boundary element model is an ideal modeling technique for modeling the fluid domain when the governing field equations is the Laplace equation. In this case the nonlinear boundary element model was coupled with a finite element model of membrane structures, but the model could have been coupled with other finite element models of more rigid structures, such as a pontoon floating breakwater. 相似文献
19.
For accurate prediction of the deformation of cable in the towed system, a new finite element model is presented that provides a representation of both the bending and torsional effects. In this paper, the cubic spline interpolation function is applied as the trial solution. By using a weighted residual approach, the discretized motion equations for the new finite element model are developed. The model is calculated with the computation program complier by Matlab. Several numerical examples are presented to illustrate the numerical schemes. The results of numerical simulation are stable and valid, and consistent with the mechanical properties of the cable. The model can be applied to kinematics analysis and the design of ocean cable, such as mooring lines, towing, and ROV umbilical cables. 相似文献
20.
Benchmark computations of wave run-up on single cylinder and four cylinders by naoe-FOAM-SJTU solver
The benchmark simulations of wave run-up on a fixed single truncated circular cylinder and four circular cylinders are presented in this paper. Our in-house CFD solver naoe-FOAM-SJTU is adopted which is an unsteady two-phase CFD code based on the open source package OpenFOAM. The Navier-Stokes equations are employed as the governing equations, and the volume of fluid (VOF) method is applied for capturing the free surface. Monochromatic incident waves with the specified wave period and wave height are simulated and wave run-up heights around the cylinder are computed and recorded with numerical virtual wave probes. The relationship between the wave run-up heights and the incident wave parameters are analyzed. The numerical results indicate that the presented naoe-FOAM-SJTU solver can provide accurate predictions for the wave run-up on one fixed cylinder and four cylinders, which has been proved by the comparison of simulated results with experimental data. 相似文献