首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 126 毫秒
1.
The garnet-cordierite zone, the highest-grade zone of the Ryoke metamorphic rocks in the Yanai district, SW Japan, is defined by the coexistence of garnet and cordierite in pelitic rocks. Three assemblages in this zone are studied in detail, i.e. spinel + cordierite + biotite, garnet + cordierite + biotite and garnet + biotite, all of which contain quartz, K-feldspar and plagioclase. The Mg/(Fe + Mg) in the coexisting minerals decreases in the following order: cordierite, biotite, garnet and spinel. Two facts described below are inconsistent with the paragenetic relation in the K2OFeOMgOAl2O3SiO2H2O (KFMASH) system in terms of an isophysical variation. First, garnet and biotite in the last assemblage have Mg/(Fe + Mg) higher than those in the second. Second, the first two assemblages are described by the reaction,
while they occur in a single outcrop. The addition of MnO, ZnO and TiO2 to the system can resolve the inconsistencies as follows. The assemblage garnet + biotite can consist of garnet and biotite higher in Mg/(Fe + Mg) than those in garnet + cordierite + biotite as long as they are enriched in spessartine and depleted in Al, respectively. The assemblage garnet + cordierite + biotite becomes stable relative to spinel + cordierite + biotite with increasing spessartine content or decreasing gahnite content and the Ti content of biotite. The constituent minerals of the assemblages, spinel + cordierite + biotite and garnet + cordierite + biotite, preserve several reaction microstructures indicative of prograde reactions,
and
together with retrograde reactions,
and
This suggests that the pressure-temperature path of the rocks includes an isobaric heating and an isobaric or decompressional cooling. The high-grade areas consisting of the K-feldspar-cordierite zone, sillimanite-K-feldspar zone and garnet-cordierite zone have prograde paths involving isobaric heating and show a southwards increase in pressure with a thermal maximum in the middle. These high-grade zones are closely associated with the gneissose granitic rocks, suggesting that the Ryoke metamorphism, one of the typical low-pressure type, is caused by the heat supply from the syn-tectonic granitic rocks that emplaced at the middle level of the crust. Received: 22 August 1997 / Accepted: 11 May 1998  相似文献   

2.
The Motuo area is located in the east of the Eastern Himalayan Syntaxis. There outcrops a sequence of high-grade metamorphic rocks, such as metapelites. Petrology and mineralogy data suggest that these rocks have experienced three stages of metamorphism. The prograde metamorphic mineral assemblages(M1) are mineral inclusions(biotite + plagioclase + quartz ± sillimanite ± Fe-Ti oxides) preserved in garnet porphyroblasts, and the peak metamorphic assemblages(M2) are represented by garnet with the lowest XSps values and the lowest XFe# ratios and the matrix minerals(plagioclase + quartz ± Kfeldspar + biotite + muscovite + kyanite ± sillimanite), whereas the retrograde assemblages(M3) are composed of biotite + plagioclase + quartz symplectites rimming the garnet porphyroblasts. Thermobarometric computation shows that the metamorphic conditions are 562–714°C at 7.3–7.4 kbar for the M1 stage, 661–800°C at 9.4–11.6 kbar for the M2 stage, and 579–713°C at 5.5–6.6 kbar for the M3 stage. These rocks are deciphered to have undergone metamorphism characterized by clockwise P-T paths involving nearly isothermal decompression(ITD) segments, which is inferred to be related to the collision of the India and Eurasia plates.  相似文献   

3.

Granulite facies rocks on Else Platform in the northern Prince Charles Mountains, east Antarctica, consist of metasedimentary gneiss extensively intruded by granitic rocks. The dominant rock type is a layered garnetbiotite‐bearing gneiss intercalated with minor garnet‐cordierite‐sillimanite gneiss and calc‐silicate. Voluminous megacrystic granite intruded early during a mid‐Proterozoic (ca 1000 Ma) granulite event, M1, widely recognized in east Antarctica. Peak metamorphic conditions for M1 are in the range of 650–750 MPa at ～800°C and were associated with the development of a gneissic foliation, S1 and steep east‐plunging lineation, L1. Strain partitioning during progressive non‐coaxial deformation formed large D2 granulite facies south‐dipping thrusts, with a steep, east‐plunging lineation. In areas of lower D2 strain, large‐scale upright, steep east‐plunging fold structures formed synchronously with the D2 high‐strain zones. Voluminous garnet‐bearing leucogneiss intruded at 940 ±20 Ma and was deformed in the D2 high‐strain zones. Textural relationships in pelitic rocks show that peak‐M2 assemblages formed during increasing temperatures via reactions such as biotite + sillimanite + quartz ± plagioclase = spinel + cordierite + ilmenite + K‐feldspar + melt. In biotite‐absent rocks, re‐equilibration of deformed M1 garnet‐sillimanite‐ilmenite assemblages occurred through decompressive reactions of the form, garnet + sillimanite + ilmenite = cordierite + spinel + quartz. Pressure/temperature estimates indicate that peak‐M2 conditions were 500–600 MPa and 700±50°C. At about 500 Ma, north‐trending granitic dykes intruded and were deformed during D3‐M3 at probable upper amphibolite facies conditions. Cooling from peak D3‐M3 conditions was associated with the formation of narrow greenschist facies shear zones, and the intrusion of pegmatite. Cross‐cutting all features are abundant north‐south trending alkaline mafic dykes that were emplaced over the interval ca 310–145 Ma, reflecting prolonged intrusive activity. Some of the dykes are associated with steeply dipping faults that may be related to basin formation during Permian times and later extension, synchronous with the formation of the Lambert Graben in the Cretaceous.  相似文献   

4.
Diffusive processes are a strong function of temperature. Thus, during cooling of rocks, mineral grains may develop zoning profiles as successively larger parts of the grain “close” to the diffusive exchange with the rock. One of the consequences of this process is that, during cooling, successively larger parts of zoned minerals (depending on grain size) are effectively removed from the reacting part of the rock volume. Thus, the effective bulk composition of metamorphic rocks changes during cooling and the rate of its change will be a function of grain size. Because the sequence of metamorphic reactions seen by a given rock is a strong function of its bulk composition, this process may have the consequence that two rocks of identical overall bulk composition, but of different grain size, may experience a different sequence of reactions. Qualitatively identical peak paragenesis may therefore react to form qualitatively different retrograde reaction textures. The model is applied to examples in the pelitic system. There, garnet is usually the slowest diffusing phase developing zoning profiles during cooling and the effective removal of garnet from the reacting rock volume will cause changes of the effective bulk composition. It is shown that, during cooling of pelitic rocks from amphibolite facies conditions, typical aluminous peak parageneses of garnet-muscovite-kyanite ± biotite may react to form either staurolite, chlorite or muscovite (or different combinations thereof), depending on grain size. During cooling from the granulite facies, aluminous peak parageneses of garnet-cordierite-sillimanite may form biotite, either on the expense of cordierite or garnet, also depending on grain size. The two examples are illustrated with a series of reaction textures reported for amphibolite and granulite terrains in the literature. Received: 12 March 1996 / Accepted: 7 April 1997  相似文献   

5.
Abstract Finite difference models of Fe-Mg diffusion in garnet undergoing cooling from metamorphic peak conditions are used to infer the significance of temperatures calculated using garnet-biotite Fe-Mg exchange thermometry. For rocks cooled from high grades where the garnet was initially homogeneous, the calculated temperature (Tcalc) using garnet core and matrix biotite depends on the size of the garnet, the ratio of garnet to biotite in the rock (Vgarnet/Vbiotite) and the cooling rate. For garnets with radii of 1 mm and Vgarnet/Vbiotite<1, Tcalc is 633, 700 and 777°C for cooling rates of 1, 10 and 100°C/Ma. For Vgarnet/Vbiotite= 1 and 4 and a cooling rate of 10° C/Ma, Tcalc is approximately 660 and 610° C, respectively. Smaller and larger garnets have lower and higher Tcalc, respectively. These results suggest that peak metamorphic temperatures may be reliably attained from rocks crystallized at conditions below Tcalc of the garnet core, provided that Vgarnet/Vbiotite is sufficiently small (<0.1) and that the composition of the biotite at the metamorphic peak has not been altered during cooling. Numerical experiments on amphibolite facies garnets with nominal peak temperatures of 550–600° C generate a ‘well’in Fe/(Fe + Mg) near the rim during cooling. Maximum calculated temperatures for the assemblage garnet + chlorite + biotite + muscovite + plagioclase + quartz using the Fe/(Fe + Mg) at the bottom of the ‘well’with matrix biotite range from 23–43° C to 5–12° C below the peak metamorphic temperature for cooling rates of 1 and 100° C/Ma, respectively. Maximum calculated temperatures for the assemblage garnet + staurolite + biotite + muscovite + plagioclase + quartz are approximately 70° C below the peak metamorphic temperature and are not strongly dependent on cooling rate. The results of this study indicate that it may be very difficult to calculate peak metamorphic temperatures using garnet-biotite Fe-Mg exchange thermometry on amphibolite facies rocks (Tmax > 550° C) because the rim composition of the garnet, which is required to calculate the peak temperature, is that most easily destroyed by diffusion.  相似文献   

6.
Rocks from the Valhalla metamorphic core complex, British Columbia,Canada, have experienced granulite facies metamorphism at conditionsof 82030C, 81 kbar. Peak metamorphism was accompanied bydehydration melting of muscovite, but not biotite, followedby minor back reaction of garnet $ K-feldspar $ H20= sillimanite$ biotite$plagioclase. At conditions very near those of thepeak, extensive shearing produced s-c (schistositS-cisaillement)fabrics, ribbon quartz and grain size reduction of garnet atseveral locations. Gamet-biotite Fe-Mg exchange thermometryyields temperatures that range from 580 to 1051C Low temperaturesare calculated from biotite modified dominantly by Fe–Mgexchange with garnet; high temperatures are calculated fromFerich biotites produced from the above retrograde reaction.Geothermometry is useless in these rocks to estimate peak temperaturea priori, but is very useful to help constrain the complex reactionhistory of biotites. Geochronology on monazite, zircon, allanite,titanite, hornblende, muscovite, biotite and apatite has beenused to constrain the timing of the metamorphic peak at 67–72Ma and the average cooling rate to 24 6C/Ma. Diffusion modelingof Fe–Mg exchange between biotite inclusions and hostgarnet yields cooling rates of either 3–80C/Ma or 200–2500C/Ma, depending on the choice of diffusion coefficients. Theformer value is consistent with the average cooling rate of24 C/Ma for the complex determined from geochronology, butthe faster rate cannot be ruled out and may indicate initialvery rapid cooling by thrusting of the complex onto cooler basementIt is suggested that cooling rates determined from geochronologicvs petrologic methods may not be directly comparable becausepetrologic methods sample near-peak nutamorphic cooling rateswhereas geochronologic methods sample post-peak to ambient coolingrates. KEY WORDS: geothermometry; geochronology; garnet diffusion; cooling rates; Valhalla complex *Corresponding author. Telephone: (518) 276-6103, Fax: (518) 276-8627. e-mail: spear{at}harold.geo.rpi.edu HTTP: //www.geo.rpi.edu/facstaff/spear/valhalla/valhalla.html  相似文献   

7.
Petrology and phase equilibria of rocks from two profiles inEastern Nepal from the Lesser Himalayan Sequences, across theMain Central Thrust Zone and into the Greater Himalayan Sequencesreveal a Paired Metamorphic Mountain Belt (PMMB) composed oftwo thrust-bound metamorphic terranes of contrasting metamorphicstyle. At the higher structural level, the Greater HimalayanSequences experienced high-T/moderate-P metamorphism, with ananticlockwise P–T path. Low-P inclusion assemblages ofquartz + hercynitic spinel + sillimanite have been overgrownby peak metamorphic garnet + cordierite + sillimanite assemblagesthat equilibrated at 837 ± 59°C and 6·7 ±1·0 kbar. Matrix minerals are overprinted by numerousmetamorphic reaction textures that document isobaric coolingand re-equilibrated samples preserve evidence of cooling to600 ± 45°C at 5·7 ±1·1 kbar.Below the Main Central Thrust, the Lesser Himalayan Sequencesare a continuous (though inverted) Barrovian sequence of high-P/moderate-Tmetamorphic rocks. Metamorphic zones upwards from the loweststructural levels in the south are: Zone A: albite + chlorite + muscovite ± biotite; Zone B: albite + chlorite + muscovite + biotite + garnet; Zone C: albite + muscovite + biotite + garnet ± chlorite; Zone D: oligoclase + muscovite + biotite + garnet ± kyanite; Zone E: oligoclase + muscovite + biotite + garnet + staurolite+ kyanite; Zone F: bytownite + biotite + garnet + K-feldspar + kyanite± muscovite; Zone G: bytownite + biotite + garnet + K-feldspar + sillimanite+ melt ± kyanite. The Lesser Himalayan Sequences show evidence for a clockwiseP–T path. Peak-P conditions from mineral cores average10·0 ± 1·2 kbar and 557 ± 39°C,and peak-metamorphic conditions from rims average 8·8± 1·1 kbar and 609 ± 42°C in ZonesD–F. Matrix assemblages are overprinted by decompressionreaction textures, and in Zones F and G progress into the sillimanitefield. The two terranes were brought into juxtaposition duringformation of sillimanite–biotite ± gedrite foliationseams (S3) formed at conditions of 674 ± 33°C and5·7 ± 1·1 kbar. The contrasting averagegeothermal gradients and P–T paths of these two metamorphicterranes suggest they make up a PMMB. The upper-plate positionof the Greater Himalayan Sequences produced an anticlockwiseP–T path, with the high average geothermal gradient beingpossibly due to high radiogenic element content in this terrane.In contrast, the lower-plate Lesser Himalayan Sequences weredeeply buried, metamorphosed in a clockwise P–T path anddisplay inverted isograds as a result of progressive ductileoverthrusting of the hot Greater Himalayan Sequences duringprograde metamorphism. KEY WORDS: thermobarometry; P–T paths; Himalaya; metamorphism; inverted isograds; paired metamorphic belts  相似文献   

8.
Petrology of high-pressure granulites from the eastern Himalayan syntaxis   总被引：36，自引：0，他引：36  
The eastern Himalayan syntaxis, situated at the eastern terminus of the Himalayas, is the least-known segment of the Himalayas. Recent research in this area has revealed that the syntaxis consists of the Gangdise, the Yarlung Zangbo, and the Himalayan units, each of which is bounded by faults. The Himalayan unit, the northernmost exposed part of the Indian plate, mainly contains amphibolite facies rocks, marked by the assemblages staurolite+kyanite+plagioclase+biotite+muscovite±sillimanite and garnet+amphibole+plagioclase, in the south; to the north, low- to medium-pressure granulite grade pelitic gneisses and marbles are present and are characterized by the assemblages garnet+sillimanite+K-feldspar+plagioclase or antiperthite+biotite+quartz±spinel±cordierite±orthopyroxene in gneisses, and anorthite+diopside±wollastonite and plagioclase+diopside+quartz+phlogopite+calcite in marbles. Within this unit, the Namula thrust system is a series of moderately north-dipping structures that displaced the granulite facies rocks southwards over the amphibolite facies rocks. High-pressure granulites occur as relics within these granulite facies rocks and contain garnet–kyanite granulite and garnet clinopyroxenite. The peak assemblage of the garnet–kyanite granulite includes garnet (core part)+kyanite+ternary feldspar+quartz+rutile. Sillimanite+garnet (rim part)+K-feldspar+ oligoclase+ilmenite+biotite and spinel+albite+biotite or spinel+cordierite±orthopyroxene, which are coronas around sillimanite and garnet, are retrograde products of this peak assemblage. Another peak assemblage includes very-high-Ca garnet (CaO 32–34 wt%, Alm10±Grs>80) and diopside (CaO 22–24 wt%), scapolite, meionite, quartz, and accessory Al-bearing titanite (Al2O3 4–4.5 wt%). The diopside has kink bands. Partial or complete breakdown of Ca-rich garnet during post-peak metamorphism produced pseudomorphs and coronas consisting of fine-grained symplectic intergrowths of hedenbergite and anorthite. Thermobarometric estimates in combination with reaction textures, mineral compositions, and recent experimental studies indicate that these peak assemblages were formed at P=c. 1.7–1.8 GPa, T =c. 890 °C, and the retrograde assemblages experienced near-isothermal decompression to P=0.5±0.1 GPa, T =850±50 °C. The whole-rock compositions indicate that marble and pelite are plausible candidates for the protoliths. These facts suggest the following (1) sedimentary rocks were transported to upper-mantle depths and equilibrated at those conditions to form these high-pressure granulites, which were then emplaced into the crust quickly. During the rapid exhumation of these rocks, the earlier high-pressure assemblages were overprinted by the later low- to medium-pressure assemblages, that is, the high-pressure granulite belt formed in the syntaxis. (2) The Namula thrust system is an important tectonic boundary in the syntaxis, or even in the Higher Himalaya more generally.  相似文献   

9.
A regional petrographic reconnaissance of psammitic and pelitic rocks in the Otago Schist, New Zealand, has revealed the presence of garnet (“grossalspite” with typical rim composition almandine41, spessartine25, grossular33, pyrope1) and biotite in 37 new samples, more than doubling the previously known number. A new garnet–biotite–albite zone can now be defined in the greenschist facies Otago Schist that is distinct from the better-known biotite, garnet and oligoclase zones in the along-strike Alpine Schist. The garnet–biotite–albite zone is in part metamorphically discontinuous with adjacent schists and does not support models of simple, continuous, progressive Jurassic regional metamorphism in Otago. The structurally higher (lower grade) boundary of the zone coincides in at least three places with previously mapped regional shear zones. The structurally lower (expected higher grade) boundary of the zone appears to be obliterated by a chlorite zone overprint which can be spatially related to Alpine Schist recrystallisation of ?Cretaceous age. The Otago situation serves as an example of the subtle metamorphic discontinuities that probably pervade many orogenic belts.  相似文献   

10.
在华北克拉通北缘大青山地区,广泛的深熔作用导致新太古代晚期石榴花岗岩发育。石榴花岗岩空间上与新太古代晚期大青山表壳岩(主要为石榴黑云母片麻岩)共生,渐变过渡。宏观上岩性具有不均一性,在包头哈德门沟一条实测地质剖面上可以观察到石榴混合闪长岩、石榴混合石英闪长岩和石榴混合花岗闪长岩等不同岩石类型。岩相学研究表明,石榴花岗岩与源岩矿物组合相近,但含量却大不相同。石榴花岗岩和源岩中的石榴石特征十分相似。石榴石周围存在放射状黑云母,是典型的逆反应结构。研究表明深熔作用可能发生在具有顺时针P-T轨迹的变质作用演化峰期及峰期后近等温降压阶段,主要发生钾长石熔融和黑云母熔融。地球化学特征研究表明石榴花岗岩与石榴黑云母片麻岩具有亲缘关系,均表现出高Al2O3、CaO含量,K2O/Na2O比值存在较大变化,富集轻稀土和大离子亲石元素,亏损Nb、Ta、P和Ti。但是,石榴花岗岩存在组成变化,Eu富集型和亏损型稀土模式为原地-半原地深熔花岗岩的标志性特征。SHRIMP锆石年代学研究表明深熔作用发生在2.43Ga之前,与区内新太古代晚期水平顺层滑脱变形有关,揭示华北克拉通北缘新太古代晚期构造热事件。  相似文献   

11.
Fluid inclusions in garnet, kyanite and quartz from microdiamond-bearing granulites in the Western Gneiss Region, Norway, document a conspicuous fluid evolution as the rocks were exhumed following Caledonian high- and ultrahigh-pressure (HP–UHP) metamorphism. The most important of the various fluid mixtures and daughter minerals in these rocks are: (N2 + CO2 + magnesian calcite), (N2 + CO2 + CH4 + graphite + magnesian calcite), (N2 + CH4), (N2 + CH4 + H2O), (CO2) and (H2O + NaCl + CaCl2 + nahcolite). Rutile also occurs in the N2 + CO2 inclusions as a product of titanium diffusion from the garnet host into the fluid inclusions. Volatiles composed of N2 + CO2 + magnesian calcite characterise the ambient metamorphic environment between HP–UHP (peak) and early retrograde metamorphism. During progressive decompression, the mole fraction of N2 increased in the fluid mixtures; as amphibolite-facies conditions were reached, CH4 and later, H2O, appeared in the fluids, concomitant with the disappearance of CO2 and magnesian calcite. Graphite is ubiquitous in the host lithologies and fluid inclusions. Thermodynamic modelling of the metamorphic volatiles in a graphite-buffered C-O-H system demonstrates that the observed metamorphic volatile evolution was attainable only if the f O2 increased from c. −3.5 (±0.3) to −0.8 (±0.3) log units relative to the FMQ oxygen buffer. External introduction of oxidising aqueous solutions along a system of interconnected ductile shear zones adequately explains the dramatic increase in the f O2. The oxidising fluids introduced during exhumation were likely derived from dehydration of oceanic crust and continental sediments previously subducted during an extended period of continental collision in conjunction with the Caledonian orogeny. Received: 15 December 1997 / Accepted: 25 May 1998  相似文献   

12.
The Mahneshan Metamorphic Complex (MMC) is one of the Precambrian terrains exposed in the northwest of Iran. The MMC underwent two main phases of deformation (D1 and D2) and at least two metamorphic events (M1 and M2). Critical metamorphic mineral assemblages in the metapelitic rocks testify to regional metamorphism under amphibolite‐facies conditions. The dominant metamorphic mineral assemblage in metapelitic rocks (M1) is muscovite, biotite I, Garnet I, staurolite, Andalusite I and sillimanite. Peak metamorphism took place at 600–620°C and ∼7 kbar, corresponding to a depth of ca. 24 km. This was followed by decompression during exhumation of the crustal rocks up to the surface. The decrease of temperature and pressure during exhumation produced retrograde metamorphic assemblages (M2). Secondary phases such as garnet II biotite II, Andalusite II constrain the temperature and pressure of M2 retrograde metamorphism to 520–560°C and 2.5–3.5 kbar, respectively. The geothermal gradient obtained for the peak of metamorphism is 33°C km−1, which indicates that peak metamorphism was of Barrovian type and occurred under medium‐pressure conditions. The MMC followed a ‘clockwise’ P–T path during metamorphism, consistent with thermal relaxation following tectonic thickening. The bulk chemistry of the MMC metapelites shows that their protoliths were deposited at an active continental margin. Together with the presence of palaeo‐suture zones and ophiolitic rocks around the high‐grade metamorphic rocks of the MMC, these features suggest that the Iranian Precambrian basement formed by an island‐arc type cratonization. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

13.
The investigated area around Sarvapuram represents a part of the Karimnagar granulite terrane of the Eastern Dharwar Craton, India. Garnet–bearing gneiss is hosted as enclaves, pods within granite gneiss and charnockite. It is largely made up of garnet, orthopyroxene, cordierite, biotite, plagioclase, K–feldspar, sillimanite and quartz. The peak metamorphic stage is represented by the equilibrium mineral assemblage i.e. garnet, orthopyroxene, cordierite, biotite, plagioclase, sillimanite and quartz. Breakdown of the garnet as well as preservation of the orthopyroxene–cordierite symplectite, formation of cordierite with the consumption of the garnet + sillimanite + quartz represents the decompressional event. The thermobarometric calculations suggest a retrograde P–T path with a substantial decompression of c. 3.0 kbar. The water activity(XH2 O) conditions obtained with the win TWQ program for core and symplectite compositions from garnet–bearing gneiss are 0.07–0.14 and 0.11–0.16 respectively. The quantitative estimation of oxygen fugacity in garnet–bearing gneiss reveal log f O2 values ranging from-11.38 to-14.05. This high oxidation state could be one of the reasons that account for the absence of graphite in these rocks.  相似文献   

14.
Interpretations based on quantitative phase diagrams in the system CaO–Na2O–K2O–TiO2–MnO–FeO–MgO–Al2O3–SiO2–H2O indicate that mineral assemblages, zonations and microstructures observed in migmatitic rocks from the Beit Bridge Complex (Messina area, Limpopo Belt) formed along a clockwise P–T path. That path displays a prograde P–T increase from 600 °C/7.0 kbar to 780 °C/9–10 kbar (pressure peak) and 820 °C/8 kbar (thermal peak), followed by a P–T decrease to 600 °C/4 kbar. The data used to construct the P–T path were derived from three samples of migmatitic gneiss from a restricted area, each of which has a distinct bulk composition: (1) a K, Al‐rich garnet–biotite–cordierite–sillimanite–K‐feldspar–plagioclase–quartz–graphite gneiss (2) a K‐poor, Al‐rich garnet–biotite–staurolite–cordierite–kyanite–sillimanite–plagioclase–quartz–rutile gneiss, and (3) a K, Al‐poor, Fe‐rich garnet–orthopyroxene–biotite–chlorite–plagioclase–quartz–rutile–ilmenite gneiss. Preservation of continuous prograde garnet growth zonation demonstrates that the pro‐ and retrograde P–T evolution of the gneisses must have been rapid, occurring during a single orogenic cycle. These petrological findings in combination with existing geochronological and structural data show that granulite facies metamorphism of the Beit Bridge metasedimentary rocks resulted from an orogenic event during the Palaeoproterozoic (c. 2.0 Ga), caused by oblique collision between the Kaapvaal and Zimbabwe Cratons. Abbreviations follow Kretz (1983 ).  相似文献   

15.
Xenoliths of subducted crustal origin hosted by Miocene ultrapotassicigneous rocks in the southern Pamir provide important new informationregarding the geological processes accompanying tectonism duringthe Indo-Eurasian collision. Four types have been studied: sanidineeclogites (omphacite, garnet, sanidine, quartz, biotite, kyanite),felsic granulites (garnet, quartz, sanidine and kyanite), basalticeclogites (omphacite and garnet), and a glimmerite (biotite,clinopyroxene and sanidine). Apatite, rutile and carbonate arethe most abundant minor phases. Hydrous phases (biotite andphengite in felsic granulites and basaltic eclogites, amphibolesin mafic and sanidine eclogites) and plagioclase form minorinclusions in garnet or kyanite. Solid-phase thermobarometryreveals recrystallization at mainly ultrahigh temperatures of1000–1100°C and near-ultrahigh pressures of 2·5–2·8GPa. Textures, parageneses and mineral compositions suggestderivation of the xenoliths from subducted basaltic, tonaliticand pelitic crust that experienced high-pressure dehydrationmelting, K-rich metasomatism, and solid-state re-equilibration.The timing of these processes is constrained by zircon agesfrom the xenoliths and 40Ar/39Ar ages of the host volcanic rocksto 57–11 Ma. These xenoliths reveal that deeply subductedcrust may undergo extensive dehydration-driven partial melting,density-driven differentiation and disaggregation, and sequestrationwithin the mantle. These processes may also contribute to thealkaline volcanism observed in continent-collision zones. KEY WORDS: xenolith; high-pressure; subduction; Pamir; Tibet  相似文献   

16.
A petrological and thermobarometric study of the Lago Teleccio hornfelses was undertaken to reconstruct the polymetamorphic evolution and constrain the P–T conditions of Permian contact metamorphism. The Lago Teleccio metasedimentary rocks record a Variscan regional metamorphism characterized by amphibolite facies mineral assemblages including quartz, plagioclase, K‐feldspar (Kfs 1), biotite, garnet (Grt 1) and staurolite; this was followed by a late‐Variscan mylonitization event. Metamorphism of the Variscan metamorphic rocks at the contact with a Permian granitic intrusion produced static recrystallization and/or new growth of quartz, garnet (Grt 2), plagioclase, K‐feldspar (Kfs 2), cordierite, green spinel, biotite and prismatic sillimanite (Contact 1). This thermal event, which occurred at a peak pressure of 0.23–0.35 GPa, temperature of 670–700 °C and aH2O of 0.75–1, was followed either during post‐contact metamorphism cooling or, more likely, during the early‐Alpine metamorphism by the breakdown of cordierite into an anhydrous kyanite + orthopyroxene + quartz assemblage. The poorly developed early‐Alpine eclogite facies metamorphism (Alpine 1) was characterized by relatively anhydrous mineral associations and low strain, which locally produced coronitic and pseudomorphous microstructures in metasedimentary rocks, with scanty formation of jadeite, zoisite and a new high‐pressure garnet (Grt 3). Greenschist facies retrogression (Alpine 2) was characterized by the local development of a chlorite‐ and muscovite‐bearing mineral association, suggestive of aqueous fluid incursion. In the hornfelses, the limited extent of metamorphic overprinting is suggested by the fine grain size of the Alpine mineral associations, which formed at the expense of the Permian contact metamorphic associations, and was favoured by the anhydrous mineralogy of the hornfelses.  相似文献   

17.
A complete Barrovian sequence ranging from unmetamorphosed shales to sillimanite–K-feldspar zone metapelitic gneisses crops out in a region extending from the Hudson River in south-eastern New York state, USA, to the high-grade core of the Taconic range in western Connecticut. NNE-trending subparallel biotite, garnet, staurolite, kyanite, sillimanite and sillimanite–K-feldspar isograds have been identified, although the assignment of Barrovian zones in the high-grade rocks is complicated by the appearance of fibrolitic sillimanite at the kyanite isograd. Thermobarometric results and reaction textures are used to characterize the metamorphic history of the sequence. Pressure–temperature estimates indicate maximum metamorphic conditions of 475 °C, c. 3–4 kbar in the garnet zone to >720 °C, c. 5–6 kbar in the highest grade rocks exposed. Some samples in the kyanite zone record anomalous (low) peak conditions because garnet composition has been modified by fluid-assisted reactions. There is abundant petrographic and mineral chemical information indicating that the sequence (with the possible exception of the granulite facies zone) was infiltrated by a water-rich fluid after garnet growth was nearly completed. The truncation of fluid inclusion trails in garnet by rim growth or recrystallization, however, indicates that metamorphic reactions involving garnet continued subsequent to initial infiltration. The presence of these textures in some zones of a well-constrained Barrovian sequence allows determination of the timing of fluid infiltration relative to the P–T paths. Thermobarometric results obtained using garnet compositions at the boundary between fluid–inclusion-rich and inclusion-free regions of the garnet are interpreted to represent peak metamorphic conditions, whereas rim compositions record slightly lower pressures and temperatures. Assuming that garnet grew during a single metamorphic event, infiltration must have occurred at or slightly after the peak of metamorphism, i.e. 4–5 kbar and a temperature of c. 525–550 °C for staurolite and kyanite zone rocks.  相似文献   

18.
Calibrations of the garnet-biotite geothermometer are considered with allowance for the effect of the nonideality of the coexisting garnet and biotite upon K D . The calibrations based on the model of an asymmetric subregular Prp-Alm-Grs-Sps solid solution with W i−j Grt (after Ganguly et al. (1996) and Holdaway (2000) and taking into account the experimental data published by Perchuk et al. (1983)) are the most accurate. The same may be said about the equations additionally taking into consideration the model of the symmetric regular Phl-Ann-Ms-(Ti-Bt) solution with W i−j Bt after Holdaway et al., (1997), Kaneko and Miano (2004), and the data published by Ferry and Spear (1978) and Perchuk et al. (1983). These equations well reproduce the temperature at which the Prp + Ann = Alm + Phl equilibrium is reached in experiments, and they are the least sensitive to the variation of the Ca and Mn contents in garnet and AlVI and Ti in biotite. The uncertainty of the temperature interval is 30–46°C (2σ).  相似文献   

19.
The Winding Stair Gap in the Central Blue Ridge province exposes granulite facies schists, gneisses, granofelses and migmatites characterized by the mineral assemblages: garnet–biotite–sillimanite–plagioclase–quartz, garnet–hornblende–biotite–plagioclase–quartz ± orthopyroxene ± clinopyroxene and orthopyroxene–biotite–quartz. Multiple textural populations of biotite, kyanite and sillimanite in pelitic schists support a polymetamorphic history characterized by an early clockwise P–T path in which dehydration melting of muscovite took place in the stability field of kyanite. Continued heating led to dehydration melting of biotite until peak conditions of 850 ± 30 °C, 9 ± 1 kbar were reached. After equilibrating at peak temperatures, the rocks underwent a stage of near isobaric cooling during which hydrous melt ± K‐feldspar were replaced by muscovite, and garnet by sillimanite + biotite + plagioclase. Most monazite crystals from a pelitic schist display patchy zoning for Th, Y and U, with some matrix crystals having as many as five compositional zones. A few monazite inclusions in garnet, as well as Y‐rich cores of some monazite matrix crystals, yield the oldest dates of c. 500 Ma, whereas a few homogeneous matrix monazites that grew in the main foliation plane yield dates of 370–330 Ma. Culling and analysis of individual spot dates for eight monazite grains yields three age populations of 509 ± 14 Ma, 438 ± 5 Ma and 360 ± 5 Ma. These data suggest that peak‐temperature metamorphism and partial melting in the central Blue Ridge occurred during the Salinic or Taconic orogeny. Following near isobaric cooling, a second weaker thermal pulse possibly related to intrusion of nearby igneous bodies resulted in growth of monazite c. 360 Ma, coinciding with the Neoacadian orogeny.  相似文献   

20.
Complex multivariant reactions involving Fe-Ti oxide minerals, plagioclase and olivine have produced coronas of biotite, hornblende and garnet between ilmenite and plagioclase in Adirondack olivine metagabbros. Both the biotite (6–10% TiO2) and the hornblende (3–6% TiO2) are exceptionally Titanium-rich. The garnet is nearly identical in composition to the garnet in coronas around olivine in the same rocks. The coronas form in two stages:
  1. Plagioclase+Fe-Ti Oxides+Olivine+water =Hornblende+Spinel+Orthopyroxene±Biotite +more-sodic Plagioclase
  2. Hornblende+Orthopyroxene±Spinel+Plagioclase =Garnet+Clinopyroxene+more-sodic Plagioclase
The Orthopyroxene and part of the clinopyroxene form adjacent to olivine. Both reactions are linked by exchange of Mg2+ and Fe2+ with the reactions forming pyroxene and garnet coronas around olivine in the same rocks. The reactions occur under granulite fades metamorphic conditions, either during isobaric cooling or with increasing pressure at high temperature.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号