首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Property and behaviour of sand–pile interface are crucial to shaft resistance of piles. Dilation or contraction of the interface soil induces change in normal stress, which in turn influences the shear stress mobilised at the interface. Although previous studies have demonstrated this mechanism by laboratory tests and numerical simulations, the interface responses are not analysed systematically in terms of soil state (i.e. density and stress level). The objective of this study is to understand and quantify any increase in normal stress of different pile–soil interfaces when they are subjected to loading and stress relief. Distinct element modelling was carried out. Input parameters and modelling procedure were verified by experimental data from laboratory element tests. Parametric simulations of shearbox tests were conducted under the constant normal stiffness, constant normal load and constant volume boundary conditions. Key parameters including initial normal stress ( $ \sigma_{{{\text{n}}0}}^{\prime } $ ), initial void ratio (e 0), normal stiffness constraining the interface and loading–unloading stress history were investigated. It is shown that mobilised stress ratio ( $ \tau /\sigma_{\text{n}}^{\prime } $ ) and normal stress increment ( $ \Updelta \sigma_{\text{n}}^{\prime } $ ) on a given interface are governed by $ \sigma_{{{\text{n}}0}}^{\prime } $ and e 0. An increase in $ \sigma_{{{\text{n}}0}}^{\prime } $ from 100 to 400 kPa leads to a 30 % reduction in $ \Updelta \sigma_{\text{n}}^{\prime } $ . An increase in e 0 from 0.18 to 0.30 reduces $ \Updelta \sigma_{\text{n}}^{\prime } $ by more than 90 %, and therefore, shaft resistance is much lower for piles in loose sands. A unique relationship between $ \Updelta \sigma_{\text{n}}^{\prime } $ and normal stiffness is established for different soil states. It can be applied to assess the shaft resistance of piles in soils with different densities and subjected to loading and stress relief. Fairly good agreement is obtained between the calculated shaft resistance based on the proposed relationship and the measured results in centrifuge model tests.  相似文献   

2.
Data on about forty virialized galaxy clusters with bright central galaxies, for which both the galactic velocity dispersion (?? gal) and the stellar velocity dispersion in the brightest galaxies (??*) are measured, have been used to obtain several approximate relations between ?? gal, ??*, the absolute B magnitude of the brightest central galaxyM B BCG , and the mass of the central massive black holeM BH: $\begin{gathered} \log \sigma _* = (0.12 \pm 0.14)\log \sigma _{gal} + (2.1 \pm 0.4), \hfill \\ \log \sigma _* = - (0.15 \pm 0.02)M_B^{BCG} + (0.85 \pm 0.5), \hfill \\ \log M_{BH} = 0.51\log \sigma _{gal} + 7.28. \hfill \\ \end{gathered} $ . These relations can be used to derive crude estimates ofMBH in the nuclei of the brightest galaxies using the parameters of the both host galaxies and the host galaxy clusters. The last relation above confirms earlier suggestions of a quadratic relation between the masses of the coronas of the host systems and the masses their central objects: M hg halo ?? M cent 2 . The relations obtained are consistent with the common evolution of subsystems with different scales and masses formed in the process of hierarchical clustering.  相似文献   

3.
Weak, compact radio sources (～100 mJy peak flux, L～1–10 pc) with their spectral peaks at about a gigahertz are studied, based on the complete sample of 46 radio sources of Snellen, drawn from high-sensitivity surveys, including the low-frequency Westerbork catalog. The physical parameters have been estimated for 14 sources: the magnetic field (H ⊥), the number density of relativistic particles (n e), the energy of the magnetic field $(E_{H_ \bot } )$ , and the energy of relativistic particles (E e). Ten sources have $E_{H_ \bot } \ll E_e $ , three have approximate equipartition of the energies $(E_{H_ \bot } \sim E_e )$ , and only one has $E_{H_ \bot } \gg E_e $ . The mean magnetic fields in quasars (10?3 G) and galaxies (10?2 G) have been estimated. The magnetic field appears to be related to the sizes of compact features as $H \sim 1/\sqrt L $ .  相似文献   

4.
Several new radiation defects with total electron spin S?=?1 occurring in electron-irradiated, synthetic ??-quartz have been observed by using electron paramagnetic resonance spectroscopy. These defects are considered to be biradicals, i.e., pairs of S?=?1/2 species. The concentration of these centers depends on the condition of the fast-electron irradiation. They have different decay behaviors that allow measurements of any individual species especially when it predominates over the others. The primary spin Hamiltonian parameter matrices g 1, g 2, D have now been determined for two similar defects, which herein are labeled $ E_{2}^{\prime \prime } $ and $ E_{4}^{\prime \prime } $ . Inter-electron distances estimated by using the magnetic dipole model, suggest that the structures of centers $ E_{2}^{\prime \prime } $ and $ E_{4}^{\prime \prime } $ both involve the unpaired electrons each located in orbitals of two silicon atoms next to a common oxygen vacancy but which have slightly different Si?CSi distances at 0.90 and 0.79?nm, respectively. This model is consistent with previous DFT calculations of the triplet configurations with local energetic minima. Observed decay behaviors suggest a transformation of centers $ E_{2,4}^{\prime \prime } $ to the analogous $ E_{1}^{\prime \prime } $ center. These triplet centers in quartz provide new insights into the structures of analogous defects in amorphous silica.  相似文献   

5.
The thermodynamic calculation of dehydration reacton suggests very low activity of H2O during metamorphic peak of the Archaean granulite complex in the region studied.The αH2O values for Al-rich gneiss and hypersthene biotite gneiss-granulite in the Taipingzhai region are usually between 0.10 and 0.20,and those in the Louzishan region are 0.15-0.25.The fugacity of O2 in terms of lgf O2 in whole region ranges form-8to-14.The average coefficients of (δμH2O/δHMg^Bt)and(δμO2/δXMg^Bt)in the Taipingzhai region are-0.293 and-1.60 respectively,and those in the Louzishan region are-0.364and-1.420.The activity of H2O is very low in the whole region,but its values and other data mentioned above are considerably constant from place to place within a given region,even in rocks of dirrerent lithological characters.However,they show a certain gradient between different regions.Such characteristics are compatible with the genetic mechanism known as“carbonic metamorphism” put forward by Newton et al.,i.e.,the α H2O during the peak stage is controlled by permeation of pervasive CO2 influx of the mantle source,and shows features of external buffering.  相似文献   

6.
This study presents accurate and precise iron isotopic data for 16 co-magmatic rocks and 6 pyroxene–magnetite pairs from the classic, tholeiitic Red Hill sill in southern Tasmania. The intrusion exhibits a vertical continuum of compositions created by in situ fractional crystallisation of a single injection of magma in a closed igneous system and, as such, constitutes a natural laboratory amenable to determining the causes of Fe isotope fractionation in magmatic rocks. Early fractionation of pyroxenes and plagioclase, under conditions closed to oxygen exchange, gives rise to an iron enrichment trend and an increase in $ f_{{{\text{O}}_{2} }} $ of the melt relative to the Fayalite–Magnetite–Quartz (FMQ) buffer. Enrichment in Fe3+/ΣFemelt is mirrored by δ57Fe, where VIFe2+-bearing pyroxenes partition 57Fe-depleted iron, defining an equilibrium pyroxene-melt fractionation factor of $ \Updelta^{57} {\text{Fe}}_{{{\text{px}} - {\text{melt}}}} \le - 0.25\,\permille \times 10^{6} /T^{2} $ . Upon magnetite saturation, the $ f_{{{\text{O}}_{2} }} $ and δ57Fe of the melt fall, commensurate with the sequestration of the oxidised, 57Fe-enriched iron into magnetite, quantified as $ \Updelta^{57} {\text{Fe}}_{{{\text{mtn}} - {\text{melt}}}} = + 0.20\,\permille \times 10^{6} /T^{2} $ . Pyroxene–magnetite pairs reveal an equilibrium fractionation factor of $ \Updelta^{57} {\text{Fe}}_{{{\text{mtn}} - {\text{px}}}} \approx + 0.30\,\permille $ at 900–1,000?°C. Iron isotopes in differentiated magmas suggest that they may act as an indicator of their oxidation state and tectonic setting.  相似文献   

7.
In order to evaluate the effect of trace and minor elements (e.g., P, Y, and the REEs) on the high-temperature solubility of Ti in zircon (zrc), we conducted 31 experiments on a series of synthetic and natural granitic compositions [enriched in TiO2 and ZrO2; Al/(Na + K) molar ~1.2] at a pressure of 10 kbar and temperatures of ~1,400 to 1,200 °C. Thirty of the experiments produced zircon-saturated glasses, of which 22 are also saturated in rutile (rt). In seven experiments, quenched glasses coexist with quartz (qtz). SiO2 contents of the quenched liquids range from 68.5 to 82.3 wt% (volatile free), and water concentrations are 0.4–7.0 wt%. TiO2 contents of the rutile-saturated quenched melts are positively correlated with run temperature. Glass ZrO2 concentrations (0.2–1.2 wt%; volatile free) also show a broad positive correlation with run temperature and, at a given T, are strongly correlated with the parameter (Na + K + 2Ca)/(Si·Al) (all in cation fractions). Mole fraction of ZrO2 in rutile $ \left( {\mathop X\nolimits_{{{\text{ZrO}}_{ 2} }}^{\text{rt}} } \right) $ in the quartz-saturated runs coupled with other 10-kbar qtz-saturated experimental data from the literature (total temperature range of ~1,400 to 675 °C) yields the following temperature-dependent expression: $ {\text{ln}}\left( {\mathop X\nolimits_{{{\text{ZrO}}_{ 2} }}^{\text{rt}} } \right) + {\text{ln}}\left( {a_{{{\text{SiO}}_{2} }} } \right) = 2.638(149) - 9969(190)/T({\text{K}}) $ , where silica activity $ a_{{{\text{SiO}}_{2} }} $ in either the coexisting silica polymorph or a silica-undersaturated melt is referenced to α-quartz at the P and T of each experiment and the best-fit coefficients and their uncertainties (values in parentheses) reflect uncertainties in T and $ \mathop X\nolimits_{{{\text{ZrO}}_{2} }}^{\text{rt}} $ . NanoSIMS measurements of Ti in zircon overgrowths in the experiments yield values of ~100 to 800 ppm; Ti concentrations in zircon are positively correlated with temperature. Coupled with values for $ a_{{{\text{SiO}}_{2} }} $ and $ a_{{{\text{TiO}}_{2} }} $ for each experiment, zircon Ti concentrations (ppm) can be related to temperature over the range of ~1,400 to 1,200 °C by the expression: $ \ln \left( {\text{Ti ppm}} \right)^{\text{zrc}} + \ln \left( {a_{{{\text{SiO}}_{2} }} } \right) - \ln \left( {a_{{{\text{TiO}}_{2} }} } \right) = 13.84\left( {71} \right) - 12590\left( {1124} \right)/T\left( {\text{K}} \right) $ . After accounting for differences in $ a_{{{\text{SiO}}_{2} }} $ and $ a_{{{\text{TiO}}_{2} }} $ , Ti contents of zircon from experiments run with bulk compositions based on the natural granite overlap with the concentrations measured on zircon from experiments using the synthetic bulk compositions. Coupled with data from the literature, this suggests that at T ≥ 1,100 °C, natural levels of minor and trace elements in “granitic” melts do not appear to influence the solubility of Ti in zircon. Whether this is true at magmatic temperatures of crustal hydrous silica-rich liquids (e.g., 800–700 °C) remains to be demonstrated. Finally, measured $ D_{\text{Ti}}^{{{\text{zrc}}/{\text{melt}}}} $ values (calculated on a weight basis) from the experiments presented here are 0.007–0.01, relatively independent of temperature, and broadly consistent with values determined from natural zircon and silica-rich glass pairs.  相似文献   

8.
High-precision WBVR photoelectric observations of the eclipsing binary GG Ori (B9.5V+B9.5V), which has an eccentric orbit (e=0.22), were carried out in 1988–2001 at the Moscow and high-altitude Tian-Shan Observatories of the Sternberg Astronomical Institute. The aim of these observations was investigation of the apsidal motion of the system. Analysis of the resulting 12-year series of observations enabled us for the first time to accurately (to within 11%) measure the rate of rotation of the orbit $\dot \omega _{obs} = 0.046 \pm 0.005^\circ /yr$ and to appreciably improve estimates of the photometric and absolute parameters. The observed value of $\dot \omega _{obs}$ is 28% higher than the theoretical prediction of $\dot \omega _{th} = \dot \omega _{cl} + \dot \omega _{rel} = 0.036 \pm 0.001^\circ /yr$ . The relativistic part of the apsidal motion in this system $\dot \omega _{rel}$ is a factor of 2.5 greater than the classical term $\dot \omega _{cl}$ due to the tidal and rotational deformations of the components. The interstellar extinction in the direction of the star (at a distance of r=425 pc) is very large (A v =1.75 m ). A number of recently published results (in particular, the conclusion that the components of this eclipsing binary are young) are confirmed.  相似文献   

9.
Magnesiowüstite, (Mg0.08Fe0.88)O, and wüstite, Fe0.94O, were compressed to ~36?GPa at ambient temperature in the diamond anvil cell (DAC) at the Advanced Light Source. X-ray diffraction patterns were taken in situ in radial geometry in order to study the evolution of crystallographic preferred orientation through the cubic-to-rhombohedral phase transition. Under uniaxial stress in the DAC, {100}c planes aligned perpendicular to the compression direction. The {100}c in cubic became { $\left\{ {10\bar 14} \right\}$ }r in rhombohedral and remained aligned perpendicular to the compression direction. However, the {101}c and {111}c planes in the cubic phase split into { ${10{\bar{1}}4}$ }r and { ${11{\bar{2}}0}$ }r, and (0001)r and { ${10{\bar{1}}1}$ }r, respectively, in the rhombohedral phase. The { ${11{\bar{2}}0}$ }r planes preferentially aligned perpendicular to the compression direction while { ${10{\bar{1}}4}$ }r oriented at a low angle to the compression direction. Similarly, { ${10{\bar{1}}1}$ }r showed a slight preference to align more closely perpendicular to the compression direction than (0001)r. This variant selection may occur because the 〈 ${10{\bar{1}}4}$ 〉r and [0001]r directions are the softer of the two sets of directions. The rhombohedral texture distortion may also be due to subsequent deformation. Indeed, polycrystal plasticity simulations indicate that for preferred { ${10{\bar{1}}4}$ }〈 ${1{\bar{2}}10}$ 〉r and { ${11{\bar{2}}0}$ }〈 ${{\bar{1}}101}$ 〉r slip and slightly less active { ${10{\bar{1}}1}$ }〈 ${{\bar{1}}2{\bar{1}}0}$ 〉r slip, the observed texture pattern can be obtained.  相似文献   

10.
Natural springs have been reliable sources of domestic water and have allowed for the development of recreational facilities and resorts in the Central Appalachians. The structural history of this area is complex and it is unknown whether these natural springs receive significant recharge from modern precipitation or whether they discharge old water recharged over geological times scales. The main objective of this study was to use stable isotopes of water ( $\delta^{18} {\text{O}}_{{{\text{H}}_{2} {\text{O}}}}$ and $\delta^{2} {\text{H}}_{{{\text{H}}_{2} {\text{O}}}}$ ), dissolved inorganic carbon ( $\delta^{13} {\text{C}}_{\text{DIC}}$ ) and dissolved sulfate ( $\delta^{34} {\text{S}}_{{{\text{SO}}_{4} }}$ and $\delta^{18} {\text{O}}_{{{\text{SO}}_{4} }}$ ) to delineate sources of water, carbon and sulfur in several natural springs of the region. Our preliminary isotope data indicate that all springs are being recharged by modern precipitation. The oxygen isotope composition indicates that waters in thermal springs did not encounter the high temperatures required for O isotope exchange between the water and silicate/carbonate minerals, and/or the residence time of water in the aquifers was short due to high flow rates. The carbon isotopic composition of dissolved inorganic carbon and sulfur/oxygen isotopic composition of dissolved sulfate provide evidence of low-temperature water–rock interactions and various biogeochemical transformations these waters have undergone along their flow path.  相似文献   

11.
Groundwater-level data from an aquifer test utilizing four pumped wells conducted in the South Pasco wellfield in Pasco County, Florida, USA, were analyzed to determine the anisotropic transmissivity tensor, storativity, and leakance in the vicinity of the wellfield. A weighted least-squares procedure was used to analyze drawdowns measured at eight observation wells, and it was determined that the major axis of transmissivity extends approximately from north to south and the minor axis extends approximately from west to east with an angle of anisotropy equal to N4.54°W. The transmissivity along the major axis ${\left( {T_{{\xi \xi }} } \right)}$ is 14,019 m2 day–1, and the transmissivity along the minor axis ${\left( {T_{{\eta \eta }} } \right)}$ is 4,303 m2 day–1. The equivalent transmissivity $T_{e} = {\left( {T_{{\xi \xi }} T_{{\eta \eta }} } \right)}^{{1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-0em} 2}} = 7,767{{\text{m}}^{2} } \mathord{\left/ {\vphantom {{{\text{m}}^{2} } {{\text{day}}^{{ - {\text{1}}}} }}} \right. \kern-0em} {{\text{day}}^{{ - {\text{1}}}} }$ , and the ratio of anisotropy is 3.26. The storativity of the aquifer is 7.52?×?10?4, and the leakance of the overlying confining unit is 1.37?×?10?4 day?1. The anisotropic properties determined for the South Pasco wellfield in this investigation confirm the results of previous aquifer tests conducted in the wellfield and help to quantify the NW–SE to NE–SW trends for regional fracture patterns and inferred solution-enhanced flow zones in west-central Florida.  相似文献   

12.
A unifying theory of kinetic rate laws, based on order parameter theory, is presented. The time evolution of the average order parameter is described by $$\langle Q\rangle \propto \smallint P(x)e^{^{^{^{^{^{^{ - xt} } } } } } } dx = L(P)$$ where t is the time, x is the effective inverse susceptibility, and L indicates the Laplace transformation. The probability function P(x) can be determined from experimental data by inverse Laplace transformation. Five models are presented:
  1. Polynomial distributions of P(x) lead to Taylor expansions of 〈Q〉 as $$\langle Q\rangle = \frac{{\rho _1 }}{t} + \frac{{\rho _2 }}{{t^2 }} + ...$$
  2. Gaussian distributions (e.g. due to defects) lead to a rate law $$\langle Q\rangle = e^{ - x_0 t} e^{^{^{^{^{\frac{1}{2}\Gamma t^2 } } } } } erfc\left( {\sqrt {\frac{\Gamma }{2}} t} \right)$$ where x 0 is the most probable inverse time constant, Γ is the Gaussian line width and erfc is the complement error integral.
  3. Maxwell distributions of P are equivalent to the rate law 〈Q〉∝e?k√t .
  4. Pseudo spin glasses possess a logarithmic rate law 〈Q〉∝lnt.
  5. Power laws with P(x)=x a lead to a rate law: ln〈Q〉=-(α + 1) ln t.
The power spectra of Q are shown for Gaussian distributions and pseudo spin glasses. The mechanism of kinetic gradient coupling between two order parameters is evaluated.  相似文献   

13.
The system Fe-Si-O: Oxygen buffer calibrations to 1,500K   总被引：1，自引：0，他引：1  
The five solid-phase oxygen buffers of the system Fe-Si-O, iron-wuestite (IW), wuestite-magnetite (WM), magnetite-hematite (MH), quartz-iron-fayalite (QIF) and fayalite-magnetite-quartz (FMQ) have been recalibrated at 1 atm pressure and temperatures from 800°–1,300° C, using a thermogravimetric gas mixing furnace. The oxygen fugacity, \(f_{{\text{O}}_{\text{2}} }\) was measured with a CaO-doped ZrO2 electrode. Measurements were made also for wuestite solid solutions in order to determine the redox behavior of wuestites with O/Fe ratios varying from 1.05 to 1.17. For FMQ, additional determinations were carried out at 1 kb over a temperature range of 600° to 800° C, using a modified Shaw membrane. Results agree reasonably well with published data and extrapolations. The reaction parameters K, ΔG r o , ΔH r o , and ΔS r o were calculated from the following log \(f_{{\text{O}}_{\text{2}} }\) /T relations (T in K): $$\begin{gathered} {\text{IW }}\log f_{{\text{O}}_{\text{2}} } = - 26,834.7/T + 6.471\left( { \pm 0.058} \right) \hfill \\ {\text{ }}\left( {{\text{800}} - 1,260{\text{ C}}} \right), \hfill \\ {\text{WM }}\log f_{{\text{O}}_{\text{2}} } = - 36,951.3/T + 16.092\left( { \pm 0.045} \right) \hfill \\ {\text{ }}\left( {{\text{1,000}} - 1,300{\text{ C}}} \right), \hfill \\ {\text{MH }}\log f_{{\text{O}}_{\text{2}} } = - 23,847.6/T + 13.480\left( { \pm 0.055} \right) \hfill \\ {\text{ }}\left( {{\text{1,040}} - 1,270{\text{ C}}} \right), \hfill \\ {\text{QIF }}\log f_{{\text{O}}_{\text{2}} } = - 27,517.5/T + 6.396\left( { \pm 0.049} \right) \hfill \\ {\text{ }}\left( {{\text{960}} - 1,140{\text{ C}}} \right), \hfill \\ {\text{FMQ }}\log f_{{\text{O}}_{\text{2}} } = - 24,441.9/T + 8.290\left( { \pm 0.167} \right) \hfill \\ {\text{ }}\left( {{\text{600}} - 1,140{\text{ C}}} \right). \hfill \\ \end{gathered}$$ These experimentally determined reaction parameters were combined with published 298 K data to determine the parameters Gf, Hf, and Sf for the phases wuestite, magnetite, hematite, and fayalite from 298 K to the temperatures of the experiments. The T? \(f_{{\text{O}}_{\text{2}} }\) data for wuestite solid solutions were used to obtain activities, excess free energies and Margules mixing parameters. The new data provide a more reliable, consistent and complete reference set for the interpretation of redox reactions at elevated temperatures in experiments and field settings encompassing the crust, mantle and core as well as extraterrestrial environments.  相似文献   

14.
Photon correlation spectroscopy has been applied to the study of longitudinal strain relaxation of vitreous Jadeite (NaAlSi2O6) in the temperature range 811–1014° C. The correlation function $\left| {g^{\left( 1 \right)} \left. {\left( t \right)} \right|^2 \propto \exp \left( {\left( { - 2t/\tau _\beta } \right)^\beta } \right)} \right.$ obeys a Kohlrausch type function with β=0.64±0.01. Individual correlation functions fit altogether a master relaxation curve, thus demonstrating thermorheological simplicity (TRS). The temperature dependence of the measured relaxation times shows Arrhenian behaviour with $\log \left( \tau \right) = - 21.4 \pm 0.3{\text{s}} {\text{ + }} {\text{471}}{\text{.6}} \pm {\text{22}} {\text{kJmol}}^{{\text{ - 1}}} /RT$ . The time scale of longitudinal strain relaxation is consistent with the existing data on shear relaxation derived from shear viscosity and structural relaxation calculated from calorimetric C pmeasurements. Comparison with oxygen diffusion indicates that network forming elements relax at about the same time scale as viscoelastic properties. On the other hand, Na+ relaxation times derived from impedance spectroscopy are short compared to viscoelastic relaxation times at low temperatures. This difference is decreasing with increasing temperature and possibly disappearing at approximately 1100° C.  相似文献   

15.
The Weverton quartzites in the Maryland Blue Ridge are deformed by one major period of greenschist-grade deformation. The components of finite strain due to different independent mechanisms have been measured for these rocks. The total strain is split up into two major components: $$\varepsilon ^t = \varepsilon ^p + \varepsilon ^d .$$ The finite natural strain caused by dislocation creep (? d ) is measured by a new technique using folded and stretched rutile needles which are good strain markers within the quartz crystals. Pressure solution strain (? p ) is measured from the ratio of the area of new crystals and fibers to the whole rock area in principal sections. Grain boundary sliding is a dependent process which accompanies both mechanisms. Pressure solution obeys a linear Newtonian flow law, \(\left| {\dot \gamma _0^p } \right| = A_p \left| {\tau _0 } \right|\) , while dislocation creep obeys a power law of the form \(\left| {\dot \gamma _0^d } \right| = A_d \left| {\tau _0 } \right|^n \) where \(\dot \gamma _0^p ,\dot \gamma _0^d \) are octahedral shear strain rates, τ0 is the octahedral shear stress and A p , A p and n are constants. A direct correlation between finite strain measurements and the operating flow laws can be made. Application of these methods and principles to a few field examples indicates that the rocks obey a flow law partly governed by each mechanism. Any set of physical conditions defines a unique flow law and there is a transition in creep behavior from dominantly Newtonian to a power law with increasing strain rate.  相似文献   

16.
Orthorhombic post-perovskite CaPtO3 is isostructural with post-perovskite MgSiO3, a deep-Earth phase stable only above 100 GPa. Energy-dispersive X-ray diffraction data (to 9.4 GPa and 1,024 K) for CaPtO3 have been combined with published isothermal and isobaric measurements to determine its P–V–T equation of state (EoS). A third-order Birch–Murnaghan EoS was used, with the volumetric thermal expansion coefficient (at atmospheric pressure) represented by α(T) = α0 + α1(T). The fitted parameters had values: isothermal incompressibility, $ K_{{T_{0} }} $  = 168.4(3) GPa; $ K_{{T_{0} }}^{\prime } $  = 4.48(3) (both at 298 K); $ \partial K_{{T_{0} }} /\partial T $  = ?0.032(3) GPa K?1; α0 = 2.32(2) × 10?5 K?1; α1 = 5.7(4) × 10?9 K?2. The volumetric isothermal Anderson–Grüneisen parameter, δ T , is 7.6(7) at 298 K. $ \partial K_{{T_{0} }} /\partial T $ for CaPtO3 is similar to that recently reported for CaIrO3, differing significantly from values found at high pressure for MgSiO3 post-perovskite (?0.0085(11) to ?0.024 GPa K?1). We also report axial P–V–T EoS of similar form, the first for any post-perovskite. Fitted to the cubes of the axes, these gave $ \partial K_{{aT_{0} }} /\partial T $  = ?0.038(4) GPa K?1; $ \partial K_{{bT_{0} }} /\partial T $  = ?0.021(2) GPa K?1; $ \partial K_{{cT_{0} }} /\partial T $  = ?0.026(5) GPa K?1, with δ T  = 8.9(9), 7.4(7) and 4.6(9) for a, b and c, respectively. Although $ K_{{T_{0} }} $ is lowest for the b-axis, its incompressibility is the least temperature dependent.  相似文献   

17.
The partitioning of Fe and Mg between garnet and aluminous orthopyroxene has been experimentally investigated in the pressure-temperature range 5–30 kbar and 800–1,200° C in the FeO-MgO-Al2O3-SiO2 (FMAS) and CaO-FeO-MgO-Al2O3-SiO2 (CFMAS) systems. Within the errors of the experimental data, orthopyroxene can be regarded as macroscopically ideal. The effects of Calcium on Fe-Mg partitioning between garnet and orthopyroxene can be attributed to non-ideal Ca-Mg interactions in the garnet, described by the interaction term:W CaMg ga -W CaFe ga =1,400±500 cal/mol site. Reduction of the experimental data, combined with molar volume data for the end-member phases, permits the calibration of a geothermometer which is applicable to garnet peridotites and granulites: $$T(^\circ C) = \left\{ {\frac{{3,740 + 1,400X_{gr}^{ga} + 22.86P(kb)}}{{R\ln K_D + 1.96}}} \right\} - 273$$ with $$K_D = {{\left\{ {\frac{{Fe}}{{Mg}}} \right\}^{ga} } \mathord{\left/ {\vphantom {{\left\{ {\frac{{Fe}}{{Mg}}} \right\}^{ga} } {\left\{ {\frac{{Fe}}{{Mg}}} \right\}}}} \right. \kern-\nulldelimiterspace} {\left\{ {\frac{{Fe}}{{Mg}}} \right\}}}$$ and $$X_{gr}^{ga} = (Ca/Ca + Mg + Fe)^{ga} .$$ The accuracy and precision of this geothermometer are limited by largerelative errors in the experimental and natural-rock data and by the modest absolute variation inK D with temperature. Nevertheless, the geothermometer is shown to yield reasonable temperature estimates for a variety of natural samples.  相似文献   

18.
The standard enthalpies of formation of FeS (troilite), FeS2 (pyrite), Co0.9342S, Co3S4 (linnaeite), Co9S8 (cobalt pentlandite), CoS2 (cattierite), CuS (covellite), and Cu2S (chalcocite) have been determined by high temperature direct reaction calorimetry at temperatures between 700 K and 1021 K. The following results are reported: $$\Delta {\rm H}_{f,FeS}^{tr} = - 102.59 \pm 0.20kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,FeS}^{py} = - 171.64 \pm 0.93kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_{0.934} S} = - 99.42 \pm 1.52kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_9 S_8 }^{ptl} = - 885.66 \pm 16.83kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Co_3 S_4 }^{In} = - 347.47 \pm 7.27kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,CoS_2 }^{ct} = - 150.94 \pm 4.85kJ mol^{ - 1} ,$$ $$\Delta {\rm H}_{f,Cu_2 S}^{cc} = - 80.21 \pm 1.51kJ mol^{ - 1} ,$$ and $$\Delta {\rm H}_{f,CuS}^{cv} = - 53.14 \pm 2.28kJ mol^{ - 1} ,$$ The enthalpy of formation of CuFeS2 (chalcopyrite) from (CuS+FeS) and from (Cu+FeS2) was determined by solution calorimetry in a liquid Ni0.60S0.40 melt at 1100 K. The results of these measurements were combined with the standard enthalpies of formation of CuS, FeS, and FeS2, to calculate the standard enthalpy of formation of CuFeS2. We found \(\Delta {\rm H}_{f,CuFeS_2 }^{ccp} = - 194.93 \pm 4.84kJ mol^{ - 1}\) . Our results are compared with earlier data given in the literature; generally the agreement is good and our values agree with previous estimates within the uncertainties present in both.  相似文献   

19.
Dissociated dislocations have been observed for the first time by transmission electron microscopy in the perovskite-structure compound CaGeO3. Dislocations with Burgers vectors \(\left[ {1\bar 10} \right]\) and [001] (in pseudo-cubic index) are dissociated into collinear partials on the (110) plane: $$\left[ {1\bar 10} \right] = {1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-\nulldelimiterspace} 2}\left[ {1\bar 10} \right] + {1 \mathord{\left/ {\vphantom {1 2}} \right. \kern-\nulldelimiterspace} 2}\left[ {1\bar 10} \right]$$ and [001] = 1/2[001] + 1/2[001]. The partials react to form octagonal extended nodes. The stacking fault ribbons with displacement vector \(\left[ {1\bar 10} \right]\) have a width of 350 A, which corresponds to a stacking fault energy of 35 erg/cm2 (or mJ/m2).  相似文献   

20.
Suppose that ¯(x1),...,¯Z(xn). are observations of vector-valued random function ¯(x). In the isotropic situation, the sample variogram γ*(h) for a given lag h is $$\bar \gamma ^ * (h) = \frac{1}{{2N(h)}}\mathop \sum \limits_{s(h)} (\overline Z (x_1 ) - \overline Z (x_1 )) \overline {(Z} (x_1 ) - \overline Z (x_1 ))^T $$ where s(h) is a set of paired points with distance h and N(h) is the number of pairs in s(h).. For a selection of lags h1, h2, .... hk such that N (h1) > O. we obtain a ktuple of (semi) positive definite matrices $\bar \gamma ^ * (h_{ 1} ),. . . ., \bar \gamma ^ * (h_{ k} )$ . We want to determine an orthonormal matrix B which simultaneously diagonalizes the $\bar \gamma ^ * (h_{ 1} ),. . . ., \bar \gamma ^ * (h_{ k} )$ or nearly diagonalizes them in the sense that the sum of squares of offdiagonal elements is small compared to the sum of squares of diagonal elements. If such a B exists, we linearly transform $\overline Z (x)$ by $\overline Y (x) = B\overline Z (x)$ . Then, the resulting vector function $\overline Y (x)$ has less spatial correlation among its components than $\overline Z (x)$ does. The components of $\overline Y (x)$ with little contribution to the variogram structure may be dropped, and small crossvariograms fitted by straightlines. Variogram models obtained by this scheme preserve the negative definiteness property of variograms (in the matrix-valued function sense). A simplified analysis and computation in cokriging can be carried out. The principles of this scheme arc presented in this paper.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号