共查询到20条相似文献，搜索用时 46 毫秒
1.
A rocking podium structure is a class of structures consisting of a superstructure placed on top of a rigid slab supported by free‐standing columns. The free‐standing columns respond to sufficiently strong ground motion excitation by uplifting and rocking. Uplift works as a mechanical fuse that limits the forces transmitted to the superstructure, while rocking enables large lateral displacements. Such ‘soft‐story’ system runs counter to the modern seismic design philosophy but has been used to construct several hundred buildings in countries of the former USSR following Polyakov's rule‐of‐thumb guidelines: (i) that the superstructure behave as a rigid body and (ii) that the maximum lateral displacement of the rocking podium frame be estimated using elastic earthquake displacement response spectra. The objectives of this paper are to present a dynamic model for analysis of the in‐plane seismic response of rocking podium structures and to investigate if Polyakov's rule‐of‐thumb guidelines are adequate for the design of such structures. Examination of the rocking podium structure response to analytical pulse and recorded ground motion excitations shows that the rocking podium structures are stable and that Polyakov's rule‐of‐thumb guidelines produce generally conservative designs. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
2.
The seismic response of rocking frames that consist of a rigid beam freely supported on rigid freestanding rectangular piers has received recent attention in the literature. Past studies have investigated the special case where, upon planar rocking motion, the beam maintains contact with the piers at their extreme edges. However, in many real scenarios, the beam‐to‐pier contact lies closer to the center of the pier, affecting the overall stability of the system. This paper investigates the seismic response of rocking frames under the more general case which allows the contact edge to reside anywhere in‐between the center of the pier and its extreme edge. The study introduces a rocking block model that is dynamically equivalent to a rocking frame with vertically symmetric piers of any geometry. The impact of top eccentricity (ie, the distance of the contact edge from the pier's vertical axis of symmetry) on the seismic response of rocking frames is investigated under pulse excitations and earthquake records. It is concluded that the stability of a top‐heavy rocking frame is highly influenced by the top eccentricity. For instance, a rocking frame with contacts at the extreme edges of the piers can be more seismically stable than a solitary block that is identical to one of the frame's piers, while a rocking frame with contacts closer to the centers of the piers can be less stable. The concept of critical eccentricity is introduced, beyond which the coefficient of restitution contributes to a greater reduction in the response of a frame than of a solitary pier. 相似文献
3.
Loizos Papaloizou Petros Komodromos 《Soil Dynamics and Earthquake Engineering》2009,29(11-12):1437-1454
In this paper, the dynamic behavior of multi-drum columns and colonnades with epistyles under earthquake excitations is examined through planar numerical simulations. A specialized software application, developed utilizing the discrete element methods (DEM), is used to investigate the influence of certain parameters on the seismic response of such multi-body structural systems. First, this custom-made software is extensively validated by comparing the computed responses of various problems, such as sliding, rocking and free vibration dynamics of rigid bodies, with the corresponding analytical solutions. Then, the developed software is used to study the influence of the frequency content and amplitude of the ground motions on the columns and colonnades, as well as the geometric characteristics of these structures. Parameters such as the number of drums that assemble each column and the number of columns of a colonnade appear to be defining parameters that affect the seismic response of colonnades with epistyles. For ground motions with relatively low predominant frequencies, rocking is the dominant effect in the response, while with the increase of the excitation frequency the response becomes even more complex involving both sliding and rocking phenomena. The numerical simulations show that earthquakes with relatively low predominant frequencies seem to endanger both standalone columns and colonnades with epistyles more than earthquakes with higher predominant frequencies. 相似文献
4.
This paper examines the rocking response and stability of rigid blocks standing free on an isolated base supported: (a) on linear viscoelastic bearings, (b) on single concave and (c) on double concave spherical sliding bearings. The investigation concludes that seismic isolation is beneficial to improve the stability only of small blocks. This happens because while seismic isolation increase the ‘static’ value of the minimum overturning acceleration, this value remains nearly constant as we move to larger blocks or higher frequency pulses; therefore, seismic isolation removes appreciably from the dynamics of rocking blocks the beneficial property of increasing stability as their size increases or as the excitation pulse period decreases. This remarkable result suggests that free‐ standing ancient classical columns exhibit superior stability as they are built (standing free on a rigid foundation) rather than if they were seismically isolated even with isolation system with long isolation periods. The study further confirms this finding by examining the seismic response of the columns from the peristyle of two ancient Greek temples when subjected to historic records. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
5.
Dynamic response analysis of solitary flexible rocking bodies: modeling and behavior under pulse‐like ground excitation 
下载免费PDF全文
下载免费PDF全文 Results obtained for rigid structures suggest that rocking can be used as seismic response modification strategy. However, actual structures are not rigid: structural elements where rocking is expected to occur are often slender and flexible. Modeling of the rocking motion and impact of flexible bodies is a challenging task. A non‐linear elastic viscously damped zero‐length spring rocking model, directly usable in conventional finite element software, is presented in this paper. The flexible rocking body is modeled using a conventional beam‐column element with distributed masses. This model is verified by comparing its pulse excitation response to the corresponding analytical solution and validated by overturning analysis of rocking blocks subjected to a recorded ground motion excitation. The rigid rocking block model provides a good approximation of the seismic response of solitary flexible columns designed to uplift when excited by pulse‐like ground motions. Guidance for development of rocking column models in ordinary finite element software is provided. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
6.
A new finite element model to analyze the seismic response of deformable rocking bodies and rocking structures is presented. The model comprises a set of beam elements to represent the rocking body and zero‐length fiber cross‐section elements at the ends of the rocking body to represent the rocking surfaces. The energy dissipation during rocking motion is modeled using a Hilber–Hughes–Taylor numerically dissipative time step integration scheme. The model is verified through correct prediction of the horizontal and vertical displacements of a rigid rocking block and validated against the analytical Housner model solution for the rocking response of rigid bodies subjected to ground motion excitation. The proposed model is augmented by a dissipative model of the ground under the rocking surface to facilitate modeling of the rocking response of deformable bodies and structures. The augmented model is used to compute the overturning and uplift rocking response spectra for a deformable rocking frame structure to symmetric and anti‐symmetric Ricker pulse ground motion excitation. It is found that the deformability of the columns of a rocking frame does not jeopardize its stability under Ricker pulse ground motion excitation. In fact, there are cases where a deformable rocking frame is more stable than its rigid counterpart. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
7.
This paper presents a numerical investigation on the seismic response of multidrum classical columns. The motivation for this study originates from the need to understand: (a) the level of ground shaking that classical multidrum columns can survive, and (b) the possible advantages or disadvantages of retrofitting multidrum columns with metallic shear links that replace the wooden poles that were installed in ancient times. The numerical study presented in this paper is conducted with the commercially available software Working Model 2D?, which can capture with fidelity the sliding, rocking, and slide‐rocking response of rigid‐body assemblies. This paper validates the software Working Model by comparing selected computed responses with scarce analytical solutions and the results from in‐house numerical codes initially developed at the University of California, Berkeley, to study the seismic response of electrical transformers and heavy laboratory equipment. The study reveals that relative sliding between drums happens even when the g‐value of the ground acceleration is less than the coefficient of friction, µ, of the sliding interfaces and concludes that: (a) typical multidrum classical columns can survive the ground shaking from strong ground motions recorded near the causative faults of earthquakes with magnitudes Mw=6.0–7.4; (b) in most cases multidrum classical columns free to dislocate at the drum interfaces exhibit more controlled seismic response than the monolithic columns with same size and slenderness; (c) the shear strength of the wooden poles has a marginal effect on the sliding response of the drums; and (d) stiff metallic shear links in‐between column drums may have an undesirable role on the seismic stability of classical columns and should be avoided. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
8.
This paper deals with the dynamic response of free-standing statues on the top surface of slender elastically supported cantilevers subjected to horizontal ground motion. Given that there is no link between the base of the statue and the top surface of the monolithic cantilever the statue is in equilibrium in the vertical direction under its own weight. Attention is focused on the determination of the minimum amplitude ground acceleration which leads to the rocking (overturning) instability of the statue whose mass and rotatory inertia are a priory known. It is assumed that the friction between the base of the statue and the top surface of the cantilever is sufficiently large to prevent sliding so that rocking prevails. After simulating the statue by a rigid block freely supported on the top surface of the elastically restrained monolithic cantilever, a theoretical dynamic analysis of the cantilever–rigid block system under horizontal ground motion is comprehensively presented. Two modes of overturning instability of the free standing rigid block are discussed: instability without or with impact. Criteria for overturning instability of the rigid block associated with the minimum amplitude ground acceleration which leads through the vanishing of the angular velocity to an escaped motion in the phase-plane portrait, are properly assessed. 相似文献
9.
A novel modeling approach for the seismic response assessment of rocking frames is presented. Rocking frames are systems with columns that are allowed to fully, or partially, uplift. Despite the apparent lack of a mechanism to resist lateral forces, they have a remarkable capacity against earthquake loading. Rocking frames are found in old structures, for example, ancient monuments, but it is also a promising design concept for modern structures such as bridges or buildings. The proposed modeling can be implemented in a general-purpose structural analysis software, avoiding the difficulties that come with the need of formulating and solving specifically tailored differential equations, or the use of detailed computational models. Different configurations of a rocking portal frame problem are examined. The model is based on rigid, or flexible, beam elements that describe the members of the frame. Negative-stiffness rotational springs are smartly positioned at the rocking interfaces in order to simulate the rocking restoring moment, while the mass and the rotational moment of inertia are considered either lumped or distributed. Both the cases of rigid and flexible piers/columns are discussed, while it is shown that frames with restrained columns can be considered in a straightforward manner. A simple alternative based on an equivalent oscillator that follows the generalized rocking equation of motion is also investigated. The efficiency and the accuracy of the proposed modeling is demonstrated with the aid of carefully chosen case studies. 相似文献
10.
11.
The highly complex rocking response of free-standing statues atop multi-drum columns underground excitation resulting in insuperable difficulties for obtaining reliable solution is reexamined analytically. This is achieved after simulating the columns by monolithic viscoelastic cantilevers having structural damping, based on experiments, equivalent to the energy dissipation due to impact and sliding of multi-drum columns. Subsequently, the conditions of rocking (overturning) instability of free-standing rigid blocks (representing the statues) after their uplift from the top surface of the laterally vibrating cantilevers, are established, including overturning with or without impact. Attention focuses on the minimum amplitude ground acceleration which leads to an escaped motion through the vanishing of the angular velocity and acceleration. Maximization of such a minimum amplitude (implying stabilization) of the rigid block is obtained by seeking the optimum combination of values of the slenderness ratio of the column and its height. Analytically derived results based on linearised analyses are in excellent agreement with those obtained via nonlinear numerical analyses. 相似文献
12.
《地震工程与结构动力学》2018,47(5):1212-1228
This paper investigates the 3D response of a slab supported by wobbling columns. The columns are not allowed neither to slide nor to roll out of their initial position. An analytical model is proposed, the equations of motion are derived, and they are solved numerically. The paper concludes that the addition of the slab makes the columns more stable. In fact, the system is almost equivalent to the response of a solitary column with the same aspect ratio yet larger size. However, it is also shown that the system is less stable than its planar counterpart and that planar analysis can only qualitatively describe the behavior of 3D structures. A case study shows that the concept could be used as a seismic isolation technique for bridges. However, more research need to be performed on defining proper intensity measures for uplifting structures, as it is shown that there is large record‐to‐record variability, even when intensity measures developed for rocking structures are used. 相似文献
13.
An analytical model of a deformable cantilever structure rocking on a rigid surface: development and verification 下载免费PDF全文
下载免费PDF全文 This paper extends previously developed models to account for the influence of the column and the foundation masses on the behavior of top‐heavy deformable elastic cantilever columns rocking on a rigid support surface. Several models for energy dissipation at impact are examined and compared. A novel Vertical Velocity Energy Loss model is introduced. Rocking uplift and overturning spectra for the deformable elastic cantilever model excited by sinusoidal ground motions are constructed. The effects of non‐dimensional model parameter variations on the rocking spectra and the overturning stability of the model are presented. It is shown that the remarkable overturning stability of dynamically excited large cantilever columns is not jeopardized by their deformability. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
14.
Francesca Barbagallo Melina Bosco Edoardo M. Marino Pier Paolo Rossi 《地震工程与结构动力学》2018,47(13):2682-2707
A design procedure for seismic retrofitting of concentrically and eccentrically braced frame buildings is proposed and validated in this paper. Rocking walls are added to the existing system to ensure an almost uniform distribution of the interstorey displacement in elevation. To achieve direct and efficient control over the seismic performance, the design procedure is founded on the displacement‐based approach and makes use of overdamped elastic response spectra. The top displacement capacity of the building is evaluated based on a rigid lateral deformed configuration of the structure and on the ductility capacity of the dissipative members of the braced frames. The equivalent viscous damping ratio of the braced structure with rocking walls is calculated based on semi‐empirical relationships specifically calibrated in this paper for concentrically and eccentrically braced frames. If the equivalent viscous damping ratio of the structure is lower than the required equivalent viscous damping ratio, viscous dampers are added and arranged between the rocking walls and adjacent reaction columns. The design internal forces of the rocking walls are evaluated considering the contributions of more than one mode of vibration. The proposed design procedure is applied to a large set of archetype braced frame buildings and its effectiveness verified by nonlinear dynamic analysis. 相似文献
15.
This study focuses on understanding and evaluating the effect of vehicle bridge interaction (VBI) on the response and fragility of bridges subjected to earthquakes. A comprehensive study on the effect of VBI on bridge seismic performance is conducted, providing metamodels for seismic response and fragility estimates for bridges in the presence of various types of vehicles. For this purpose, the performance of multispan simply supported concrete girder bridges with varying design and geometric parameters is assessed with 3 different types of stationary trucks placed atop them. To delineate the effects of VBI and additional truck mass, the trucks are modeled in 2 different ways—with additional masses and suspension springs (ie, with VBI) and using additional masses only (without VBI). The results provide insight on VBI effects, such as the fact that when bridge and vehicle mode shapes are in‐phase, the component responses increase and vice versa; additionally, the presence of a heavy axle near a bent increases component responses. Sensitivity analyses are also performed to determine the bridge parameters that significantly alter the component responses in the presence of vehicles. Furthermore, differences in component responses and fragilities highlight that modeling vehicles with additional masses alone is not sufficient to model the effect of truck presence on the seismic response of bridges. Finally, this study concludes that depending on the characteristics of the bridge and the vehicle, presence of a vehicle atop the bridge during an earthquake may be either beneficial or detrimental to bridge performance. 相似文献
16.
The three‐dimensional behavior of inverted pendulum cylindrical structures during earthquakes 下载免费PDF全文
下载免费PDF全文 《地震工程与结构动力学》2017,46(14):2261-2280
In order to use rocking as a seismic response modification strategy along both directions of seismic excitation, a three‐dimensional (3D) rocking model should be developed. Since stepping or rolling rocking structural members out of their initial position is not a desirable performance, a rocking design should not involve these modes of motion. To this end, a model that takes the aforementioned constraint into account needs to be developed. This paper examines the 3D motion of a bounded rigid cylinder that is allowed to uplift and sustain rocking and wobbling (unsteady rolling) motion without sliding or rolling out of its initial position (i.e., a 3D inverted pendulum). Thus, the cylinder is constrained to zero residual displacement at the end of its 3D motion. This 3D dynamic model of the rocking rigid cylinder has two DOFs (three when damping is included), making it the simplest 3D extension of Housner's classical two‐dimensional (2D) rocking model. The development of models with and without damping is presented first. They are simple enough to perform extensive parametric analyses. Modes of motion of the cylinder are identified and presented. Then, 3D rocking and wobbling earthquake response spectra are constructed and compared with the classical 2D rocking earthquake response spectra. The 3D bounded rocking earthquake response spectra for the ground motions considered seem to have a very simple linear form. Finally, it is shown that the use of a 2D rocking model may lead to unacceptably unconservative estimates of the 3D rocking and wobbling seismic response. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
17.
The present study explores analytically the concept of rocking isolation in bridges considering for the first time the influence of the abutment-backfill system. The dynamic response of rocking bridges with free-standing piers of same height and same section is examined assuming negligible deformation for the substructure and the superstructure. New relationships for the prediction of the bridge rocking motion are derived, including the equation of motion and the restitution coefficient at each impact at the rocking interfaces. The bridge structure is found to be susceptible to a failure mode related to the failure of the abutment-backfill system, which can occur prior to the well-known overturning of the rocking piers. Thus, a new failure spectrum is proposed called Failure Minimum Acceleration Spectrum (FMAS) which extends the overturning spectrum put forward in previous studies, and it differs in principle from the latter. The comparison with the dynamic response of bridges modelled as rocking frames without abutments reveals not only that seat-type abutments and their backfill have a generally beneficial effect on the seismic performance of rocking pier bridges by suppressing the free rocking motion of the frame system, but also that the simple frame model cannot capture all salient features of the rocking bridge response as it misses potential failure modes, overestimating the rocking bridge's safety when these modes are critical. 相似文献
18.
沿着摇摆桥墩的概念提出一种限制位移桥墩连续刚构桥体系。该体系通过对连续刚构桥墩底和承台之间采取一定措施,使桥梁在地震发生时能够在限制的位移量内活动,减小输入到桥梁结构中的能量,达到减震的目的。通过对一座铁路连续刚构桥的分析,发现这种限制位移桥墩连续刚构桥体系能大幅减小桥墩的延性和强度地震需求,减震效果明显,在选择合适的限制位移量的情况下,可保证桥墩在高烈度罕遇地震作用下几乎保持弹性工作状态,震后经简单处理即可保证使用功能,为震后救援工作带来极大便利,也大大减少了修复成本。 相似文献
19.
On the seismic performances of rigid block‐like structures coupled with an oscillating mass working as a TMD 下载免费PDF全文
下载免费PDF全文 Giorgia Simoneschi Alessandro Geniola Andrea M. de Leo Angelo Di Egidio 《地震工程与结构动力学》2017,46(9):1453-1469
In this paper, the effects of a mass damper on the rocking motion of a non‐symmetric rigid block‐like structure, subject to different seismic excitation, are investigated. The damper is modelled as a single degree of freedom oscillating mass, running at the top of the block and connected to it by a linear visco‐elastic device. The equations of rocking motion, the uplift and the impact conditions are derived. A nondimensionalisation of the governing equations is performed with the aim to obtain an extensive parametric analysis. The results are achieved by numerical integration of these equations. The slenderness and the base of the rigid block, and the eccentricity of the centre of mass are taken as variable parameters in the analyses. The main objective of the study is to check the performance of the damper versus the spectral characteristics of the seismic input. Three earthquake registrations with different frequency contents are used in the analyses. The results show that the presence of the mass damper leads to different levels of improvement of the response of the system, depending on the spectral characteristics of the seismic input. Curves providing the overturning slenderness of blocks of specific sizes versus the characteristics of the TMD are obtained. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
20.
为讨论近断层地震动下摇摆-自复位(Rocking Self-Centering, RSC)桥墩连续梁的地震反应及其抗震优缺点。基于OpenSees有限元分析平台讨论了RSC桥墩三维建模方法,通过对6个试验构件的模拟,比较模拟与试验桥墩滞回曲线、预应力筋最大应力等指标,验证了模型准确性。建立设置RSC桥墩和普通钢筋混凝土(Reinforced Concrete, RC)桥墩的上部结构相同的两座连续梁桥,输入3组含有强速度脉冲的近断层地震波进行非线性动力时程分析,对比其抗震性能。结果表明：在0.4 g近断层地震动下,RSC桥墩与普通RC桥墩相比,RSC桥墩的最大位移角为普通RC桥墩的78.1%～97.6%,墩底曲率延性系数仅为普通RC桥墩的24.0%～34.0%,减小了桥墩的最大变形,也减轻了桥墩地震损伤,不利的一点是使用RSC桥墩会导致支座位移增大。RSC桥墩震后的残余位移较小,且预应力筋处于弹性受力阶段,为实现震后桥梁功能的快速恢复提供了条件。 相似文献