共查询到20条相似文献，搜索用时 140 毫秒
1.
Analysis of a simple reinforced concrete (RC) structure damaged by the Bhuj, India, earthquake was carried out to estimate the level of shaking in the epicentral region. For this, an attempt was made to estimate the level of input motion to cause inelastic behavior to the extent observed during the field visit. To consider the inelastic effects, both yielding of steel bars as well as crushing of the concrete cover has been investigated employing the hysteretic model known as the Fiber model. The only available record at Ahmedabad of the Bhuj earthquake and four additional earthquake records from Japan and California were used in the analysis. Considering simple scaling of input motion, the level of input motion to cause crushing and spall‐off of the concrete cover as observed in the field was estimated to be of the order of 6 times the original instrumental record obtained at 240 km away from the epicenter. The methodology proposed was promising in providing a useful quantitative indication of the level of shaking when instrumental records are not available. It was also noted that the design response spectrum specified in Indian seismic code IS1893: 1984 appears inadequate compared to the extent of shaking estimated. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
2.
3.
本文通过能量法研究了钢筋混凝土简体结构的抗震性能。文中采用振型分解法按等效单自由度体系求解简体结构的滞回输入能;用pushover法分析了滞回耗能在结构层间的分布规律及结构自身的耗能能力;根据楼层滞回耗能与弹塑性层间位移的关系求出了薄弱层的弹塑性位移。对一高层钢筋混凝土框架-简体结构在7度罕遇地震下的抗震性能进行了评估,通过与非线性动力时程分析的对比,证明了方法的可行性。 相似文献
4.
本文通过能量法研究了钢筋混凝土筒体结构的抗震性能。文中采用振型分解法按等效单自由度体系求解筒体结构的滞回输入能;用pushover法分析了滞回耗能在结构层间的分布规律及结构自身的耗能能力;根据楼层滞回耗能与弹塑性层间位移的关系求出了薄弱层的弹塑性位移。对一高层钢筋混凝土框架-筒体结构在7度罕遇地震下的抗震性能进行了评估,通过与非线性动力时程分析的对比,证明了方法的可行性。 相似文献
5.
This paper deals with the identification of the parameters of a smoothed hysteretic model which was proposed by Bouc and Wen with emphasis on restoring force hysteresis. The problem of estimating the parameters of this system on the basis of input-output data, possibly noise corrupted, is considered. Through the application of various simulated time histories from the hysteretic model, a three-stage systematic method of system identification was proposed. Four different methods of identification are arranged and conducted in this three-stage system identification. The first stage, a sequential regressional analysis is used to identify the equivalent linear system from which elastic or inelastic response can be identified. The identified parameters can be used in the stage when the system is in elastic response. In the second stage, both time domain least-squares method and Gauss-Newton method are applied. The convergence of the Gauss-Newton method can be guaranteed if the identified results from least-squares method are adopted as the initial values for Gauss-Newton method. In the third stage, the extended Kalman filtering technique is needed to identify the noise-corrupt data. Application of this algorithm to a SDOF non-deteriorating system is verified. 相似文献
6.
Reinforced concrete bridge columns exhibit complex hysteretic behavior owing to combined action of shear, bending moment, and axial force under multi‐directional seismic shakings. The inelastic displacement of columns can be increased by shear–flexure interaction (SFI). This paper develops a simple yet reliable demand model for estimating the inelastic displacement and ductility based on the nonlinear time history analyses of 24 full‐size columns subject to a suite of near‐fault ground motions. A coupled hysteretic model is used to simulate the shear‐flexure interactive (SFI) behavior of columns and the accumulated material damage during loading reversals, including pinching, strength deterioration, and stiffness softening. Guided by rigorous dimensional analysis, the inelastic displacement responses of bridge columns are presented in dimensionless form showing remarkable order. A dimensionless nonlinearity index is derived taking into account of the column strength, ground motion amplitude, and softening or hardening post‐yield behavior. Strong correlation is revealed between the normalized inelastic displacement and the dimensionless structure‐to‐pulse frequency, the dimensionless nonlinearity index as well as the aspect ratio. Two regressive equations for displacement and ductility demands are proposed and validated against the simulation results. The SFI effects are discussed and included explicitly through the aspect ratio in the proposed model. This study offers a new way to realistically predict the inelastic displacement of columns directly from structural and ground motion characteristics. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
7.
For the performance‐based seismic design of buildings, both the displacement coefficient method used by FEMA‐273 and the capacity spectrum method adopted by ATC‐40 are non‐linear static procedures. The pushover curves of structures need to be established during processing of these two methods. They are applied to evaluation and rehabilitation of existing structures. This paper is concerned with experimental studies on the accuracy of both methods. Through carrying out the pseudo‐dynamic tests, cyclic loading tests and pushover tests on three reinforced concrete (RC) columns, the maximum inelastic deformation demands (target displacements) determined by the coefficient method of FEMA‐273 and the capacity spectrum method of ATC‐40 are compared. In addition, a modified capacity spectrum method which is based on the use of inelastic design response spectra is also included in this study. It is shown from the test specimens that the coefficient method overestimates the peak test displacements with an average error of +28% while the capacity spectrum method underestimates them with an average error of ‐20%. If the Kowalsky hysteretic damping model is used in the capacity spectrum method instead of the original damping model, the average errors become ‐11% by ignoring the effect of stiffness degrading and ‐1.2% by slightly including the effect of stiffness degrading. Furthermore, if the Newmark–Hall inelastic design spectrum is implemented in the capacity spectrum method instead of the elastic design spectrum, the average error decreases to ‐6.6% which undervalues, but is close to, the experimental results. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
8.
为研究地震作用下损伤累积对型钢高强混凝土框架节点抗震性能的影响,基于5榀型钢高强混凝土框架节点低周反复加载试验结果,分析节点构件损伤累积过程及其对刚度和强度的影响。从材料自身损伤入手,通过引入刚度影响系数考虑循环荷载作用下混凝土的单边效应,对Faria-Oliver本构模型进行改进,进而建立适应于型钢混凝土结构的材料损伤累积本构模型。同时基于该模型采用ANSYS分析软件对地震作用下的型钢高强混凝土框架节点进行数值分析,并与试验结果进行对比分析。结果表明:采用本文建立的材料损伤累积本构模型能较好地反映地震作用下型钢高强混凝土框架节点的损伤特性。在此基础上,进一步分析构件轴压比、配箍率、配钢率等设计参数对型钢高强混凝土框架节点抗震性能的影响。研究成果可为该类结构构件的抗震设计提供理论和技术支撑。 相似文献
9.
Seismic retrofitting of reinforced concrete frame structures using GFRP-tube-confined-concrete composite braces 总被引：1，自引：1，他引：0
Nasim S.Moghaddasi B 《地震工程与工程振动(英文版)》2012,11(1):91-105
This paper presents a new type of structural bracing intended for seismic retrofitting use in framed structures. This special composite brace,termed glass-fiber-reinforced-polymer(GFRP)-tube-confined-concrete composite brace,is comprised of concrete confined by a GFRP tube and an inner steel core for energy dissipation.Together with a contribution from the GFRP-tube confined concrete,the composite brace shows a substantially increased stiffness to control story drift, which is often a preferred feature in seismic retrofitting.An analysis model is established and implemented in a general finite element analysis program-OpenSees,for simulating the load-displacement behavior of the composite brace.Using this model,a parametric study of the hysteretic behavior(energy dissipation,stiffness,ductility and strength)of the composite brace was conducted under static cyclic loading and it was found that the area ratio of steel core to concrete has the greatest influence among all the parameters considered.To demonstrate the application of the composite brace in seismic retrofitting, a three-story nonductile reinforced concrete(RC)frame structure was retrofitted with the composite braces.Pushover analysis and nonlinear time-history analyses of the retrofitted RC frame structure was performed by employing a suite of 20 strong ground motion earthquake records.The analysis results show that the composite braces can effectively reduce the peak seismic responses of the RC frame structure without significantly increasing the base shear demand. 相似文献
10.
The inelastic responses of framed structures and seismic isolation systems undergoing biaxial (horizontal) shaking are coupled. In existing models for biaxial coupling of hysteretic behavior, the smoothness (or ‘knee') of the transition from elastic to yielding behavior cannot be modified without affecting the shape of the yield surface. This paper presents a model for coupled biaxial hysteretic behavior in which the knee from pre‐yield to post‐yield can be adjusted while maintaining an isotropic yield surface. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
11.
The investigation reported in this paper studies the effects of soil–structure interaction (SSI) on the seismic response and damage of building–foundation systems. A simple structural model is used for conducting a parametric study using a typical record obtained in the soft soil area of Mexico City during the 1985 earthquake. Peak response parameters chosen for this study were the roof displacement relative to the base and the hysteretic energy dissipated by the simple structural model. A damage parameter is also evaluated for investigating the SSI effects on the seismic damage of buildings. The results indicate that in most cases of inelastic response, SSI effects can be evaluated considering the rigid‐base case and the SSI period. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
12.
为了对混凝土框架结构的地震破坏机制和抗震性能进行控制,在框架柱中配置高强钢筋,并将纤维增强混凝土(FRC)用于框架结构的预期损伤部位。结构柱中的高强钢筋用来减小结构的残余变形,FRC材料用来增加结构的耗能能力和损伤容限。设计了三个框架,采用动力弹塑性时程分析方法进行分析。研究结果表明,采用高强钢筋提高了结构的整体承载能力,在层间侧移角达到3%之前避免了柱铰的出现(包括底层柱底),并且减小了结构的残余变形;预期损伤部位采用FRC材料能够提高结构的塑性耗能。 相似文献
13.
为准确全面地量化分析研究土木工程建筑中混凝土结构抗震稳定性,提出基于滞回曲线以及结构动力方程的混凝土结构抗震稳定性分析方法。首先采用滞回曲线描述混凝土结构在地震作用下的损伤情况,对滞回曲线模型拐点进行有效操作,确保动力方程对混凝土结构抗震稳定性进行有效分析。其次采用基于混凝土结构动力方程的抗震稳定性分析方法,对地震地面运动模型以及结构分析模型来分析混凝土结构的随机地震反应情况,得到混凝土结构随机反应的汇总量,在此基础上通过双参数的结构破坏模型,基于结构稳定性原理,获取运算混凝土结构抗震稳定性的概率表达式,再基于该表达式分析混凝土结构的抗震稳定性情况。实验结果说明,所提方法能够对土木工程建筑中不同类型混凝土构件抗震稳定性进行有效分析,分析结果准确且全面。 相似文献
14.
Non-linear seismic behavior of structures with limited hysteretic energy dissipation capacity 总被引：1，自引：0，他引：1
Pierino Lestuzzi Youssef Belmouden Martin Trueb 《Bulletin of Earthquake Engineering》2007,5(4):549-569
This paper investigates the non-linear seismic behavior of structures such as slender unreinforced masonry shear walls or
precast post-tensioned reinforced concrete elements, which have little hysteretic energy dissipation capacity. Even if this
type of seismic response may be associated with significant deformation capacity, it is usually not considered as an efficient
mechanism to withstand strong earthquakes. The objective of the investigations is to propose values of strength reduction
factors for seismic analysis of such structures. The first part of the study is focused on non-linear single-degree-of-freedom
(SDOF) systems. A parametric study is performed by computing the displacement ductility demand of non-linear SDOF systems
for a set of 164 recorded ground motions selected from the European Strong Motion Database. The parameters investigated are
the natural frequency, the strength reduction factor, the post-yield stiffness ratio, the hysteretic energy dissipation capacity
and the hysteretic behavior model (four different hysteretic models: bilinear self-centring, with limited or without energy
dissipation capacity, modified Takeda and Elastoplastic). Results confirm that the natural frequency has little influence
on the displacement ductility demand if it is below a frequency limit and vice versa. The frequency limit is found to be around
2 Hz for all hysteretic models. Moreover, they show that the other parameters, especially the hysteretic behavior model, have
little influence on the displacement ductility demand. New relationships between the displacement ductility demand and the
strength reduction factor for structures having little hysteretic energy dissipation capacity are proposed. These relationships
are an improvement of the equal displacement rule for the considered hysteretic models. In the second part of the investigation,
the parametric study is extended to multi-degree-of-freedom (MDOF) systems. The investigation shows that the results obtained
for SDOF systems are also valid for MDOF systems. However, the SDOF system overestimates the displacement ductility demand
in comparison to the corresponding MDOF system by approximately 15%. 相似文献
15.
通过一四层无粘结预应力现浇混凝土空心板柱结构的1/4比例模型的模拟地震振动台试验,对其在弹性和弹塑性阶段的抗震性能以及在El Centro地震动不同峰值加速度作用下的地震反应和受力过程进行了研究.对无黏结预应力现浇混凝土空心板柱结构的破坏形态、滞同性能、骨架曲线、恢复力模型、延性、刚度退化、耗能能力进行了比较深入的分析... 相似文献
16.
The paper focusses on seismic damage analysis of reinforced concrete (R/C) members, accounting for shear–flexure interaction
in the inelastic range. A finite element of the beam-column type recently proposed by the writers for the seismic analysis
of R/C structures is first briefly described. The analytical model consists of two distributed flexibility sub-elements which
interact throughout the analysis to simulate inelastic flexural and shear response. The finite element accounts for shear
strength degradation with inelastic curvature demand, as well as coupling between inelastic flexural and shear deformations
after flexural yielding. Based on this model, a seismic damage index is proposed taking into account both inelastic flexural
and shear deformations, as well as their interaction. The finite element and the seismic damage index are used to analyse
the response of R/C columns tested under cyclic loading and failing either in shear or in flexure. It is shown that the analytical
model and damage index can predict and describe well the hysteretic response of R/C columns with different types of failure. 相似文献
17.
The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
18.
Accuracy of nonlinear static procedures for the seismic assessment of shear critical structures 
下载免费PDF全文
下载免费PDF全文 The nonlinear behavior of reinforced concrete (RC) members represents a key issue in the seismic performance assessment of structures. Many structures constructed in the 1980s or earlier were designed based on force limits; thus they often exhibit brittle failure modes, strength and stiffness degradation, and severe pinching effects. Field surveys and experimental evidence have demonstrated that such inelastic responses affect the global behavior of RC structural systems. Efforts have been made to consider the degrading stiffness and strength in the simplified nonlinear static procedures commonly adopted by practitioners. This paper investigates the accuracy of such procedures for the seismic performance assessment of RC structural systems. Refined finite element models of a shear critical bridge bent and a flexure‐critical bridge pier are used as reference models. The numerical models are validated against experimental results and used to evaluate the inelastic dynamic response of the structures subjected to earthquake ground motions with increasing amplitude. The maximum response from the refined numerical models is compared against the results from the simplified static procedures, namely modified capacity spectrum method and coefficient method in FEMA‐440. The accuracy of the static procedures in estimating the displacement demand of a flexure‐critical system and shear‐critical system is discussed in detail. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
19.
20.
工业建筑结构体系取决于生产工艺及使用要求,生产工艺的复杂性往往导致复杂的结构形式。为了满足工艺要求,形成了一类钢筋混凝土管柱-钢桁架竖向混合结构。为了研究其抗震性能,选取一实际结构,取1/4子结构,模拟边界条件,按1/8缩尺比制作模型。对模型进行动力特性测试,选择El Centro波(1940 NS)对模型进行拟动力试验,再进行拟静力试验,试验得到了该结构的动力特性参数及在地震作用下的动力反应。分析了结构自振频率及阻尼比变化,变形性能,滞回性能和破坏模式等;在试验基础上,给出了结构水平承载力的计算公式,为建立该类结构的抗震设计方法提供依据。 相似文献