首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 328 毫秒
1.
Brittle and ductile deformation of alternating layers of Devonian sandstone and mudstone at Cape Liptrap, Victoria, Australia, resulted in upright folds with associated fold accommodation faults and multiple fracture sets. Structures were mapped at the Fold Stack locality at Cape Liptrap using high-resolution aerial photographs acquired by a digital camera mounted on an unmanned aerial vehicle (UAV). Subsequent photogrammetric modelling resulted in georeferenced spatial datasets (point cloud, digital elevation model and orthophotograph) with sub-cm resolution and cm accuracy, which were used to extract brittle and ductile structure orientation data. An extensive dataset of bedding measurements derived from the dense point cloud was used to compute a 3D implicit structural trend model to visualise along-strike changes of Devonian (Tabberabberan) folds at the Fold Stack locality and to estimate bulk shortening strain. This model and newly collected data indicate that first generation shallowly south-southwest plunging upright folds were gently refolded about a steeply plunging/subvertical fold axis during a Devonian low-strain north–south shortening event. This also led to the local tightening of first generation folds and possibly strike-slip movement along regional scale faults. In order to distinguish fractures associated with Devonian compression from those that formed during Cretaceous extension and later inversion, we compared the five fracture sets defined at Cape Liptrap to previously mapped joints and faults within the overlying sedimentary cover rocks of the Cretaceous Strzelecki Group (Gippsland Basin), which crop out nearby. An east-southeast trending fracture set that is not evident in the Strzelecki Group can be linked to the formation of Devonian folds. Additionally, hinge line traces extracted from the Fold Stack dataset are aligned parallel to a dominant fracture set within the overlying cover sediments. This suggests that basement structures (folds and coeval parallel faults) have an important influence on fault and joint orientations within Cretaceous cover rocks.  相似文献   

2.
The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L1 0 intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.  相似文献   

3.
GEOLOGICAL STUDIES OF METAMORPHIC ROCKS IN THE VICINITY OF M.C.T./LESSER HIMALAYAN SHEAR ZONE, PARTS OF SIKKIM HIMALAYAS  相似文献   

4.
Abstract During the Eocene-Oligocene, the Indian plate collided with the Kohistan arc along the Main Mantle Thrust (MMT) zone. The structure of the Lower Swat rock sequence, on the Indian plate directly south of the MMT, is a dome with a basement of granitic gneiss and quartz-rich schist unconformably overlain by amphibolitic and calcareous schist. The earliest superposed small-scale folds (F1 & F2) represent a progressive F1/F2 deformation that is associated with a single set of WSW-vergent large-scale folds (termed F2). These folds are inferred to have developed during oblique, WSW-directed overthrusting of the MMT suture complex onto the Lower Swat rock sequence. Metamorphism began during F1/F2 as indicated by an S1 foliation that developed during biotite-grade metamorphism. S1 is preserved as a relict texture in porphyroblasts that grew during a subsequent interkinematic phase during garnet- and higher grade metamorphism. The dominant, regional foliation (S2) developed following the interkinematic phase. S2 is associated with transposition of S1 and rotation or dismemberment of porphyroblasts. Annealing recrystallization followed S2 and continued during F3 thereby destroying or masking possible pre-existing stretching fabrics. Superposed F3 folds are upright and open with N-S axial trends. They may correlate with early doming of the Lower Swat rock sequence and with strike-slip displacement in the northern part of the MMT zone, north of the Lower Swat area. F3 was followed by retrograde metamorphism and development of E-W-trending, S-vergent F4 folds. F4 may be associated with a final phase of southward directed thrusting and inactivity in the MMT zone. Correlation of published 40Ar/39Ar ages with the metamorphic fabrics suggests that F1/F2 and F3 occurred in the Eocene, and that F4 developed in the Oligocene. F4 is the earliest indication of southward verging structures on this part of the Indian plate.  相似文献   

5.
Lower Palaeozoic sedimentary and volcanic rocks east of Queanbeyan, N.S.W., have undergone multiple deformation resulting in four systems of folds. The first of these consists of large isoclinal, recumbent folds (F1). The second generation folds (F2) are the most pronounced; they consist of flattened flexural‐slip folds with well developed axial‐plane slaty cleavage. Minor variants of this system are associated with meridionally‐trending faults. Third and fourth generation folds are minor kink systems.

The existence of first generation folds was established on the basis of F2 fold‐facing determinations, and their likely form was deduced from the geometrical variations of F2 folds. It is thought that all fold phases developed during the Late Silurian Bowning Orogeny.  相似文献   

6.
In the Precambrian rocks west and southwest of the Mount Isa Fault three significant fold generations are recognized. Within individual successions, units containing an early phase of deformation are juxtaposed by a late fault against a sequence that does not share these earlier events.

Many of the large‐scale structures in the Judenan Beds are first‐generation folds, whereas west of the Judenan Beds the area is dominated by second‐generation folds. These two sets of folds are tentatively correlated and are referred to as the Judenan Folds. An earlier set of pre‐Judenan folding is only found in the units west of the Judenan Beds. One phase of the Sybella Granite is also associated with the Judenan folding. Later small‐scale folds associated with a crenulation cleavage are, however, of little regional importance and are commonly found only in zones of highly deformed rocks.  相似文献   

7.
ANALYSIS OF FOLDS SOUTH OF MALAKAND AND ADJOINING AREAS, NORTH PAKISTAN1　Can啨ｒｏｔＪ,QuG .CuadernosdeGeologiaiberica ,1998,2 4:311～ 331. 2　DebelmasJ,MascleG .EnsSciencesdelaTerre[M ].Masson ,ed .1991.2 99.3　GaetaniM ,GarzantiE .AAPGBull ,1991,75 (9) :142 7～ 144 6 . 4　HendrixMS ,GrahamSA ,CarrollAR ,etal.GeolSocAmBull,1992 ,10 4:5 3～ 79.. 5　Jia ,Coll.PetroleumIndustryPress,Beijing .1997,2 95 . 6　JiaD ,LuHCaiD ,etal.AAPGBull ,8…  相似文献   

8.
The Agnew supracrustal belt consists of a greenstone sequence (interlayered metabasalt, differentiated gabbroic sills, ultramafic bodies, and black volcanogenic sediment) unconformably overlain by granitoid-clast conglomerate and meta-arkose. The base of the preserved sequence is intruded by grey tonalite with a crudely concordant upper contact, and by small discordant bodies of leucogranite.An early deformation (D1) produced isoclinal folds and a regional penetrative foliation. These structures were probably gently dipping when formed. D2 produced large-scale NNW-trending upright folds, a regional foliation, and a vertical N-trending ductile fault on the west side of the belt. D2 structures indicate a combination of ENE-WSW shortening, and right-lateral shear along the ductile fault. Both D1 and D2 were accompanied by metamorphism under upper greenschist to lower amphibolite facies conditions.The interpreted sequence of tectonic events is (1) deposition of the greenstone sequence on an unknown basement; (2) intrusion of large volumes of tonalite, separating the supracrustal rocks from their basement; (3) erosion of mafic rocks and tonalite to produce the clastic sedimentary sequence; (4) the first deformation; (5) intrusion of small volumes of leucogranite; (6) the second deformation.The bulk of the granitoid rocks were emplaced before the first recognisable deformation. Thus the granitoid magma cannot have been produced by partial melting of previously downbuckled ‘greenstone belt’ rocks, nor can the large-scale upright folds (D2) be a result of forceful emplacement of the magma — two common postulates for Archaean terrains. The D2 folds are closely related to the ductile fault bounding the zone: these structures, which give the present N-trending tectonic belt its form, are the youngest features in the terrain.  相似文献   

9.
Multiple deformation in all the Precambrian metamorphic-migmatitic rocks has been reported from Rajasthan during the last three decades. But, whereas the Aravalli Group and the Banded Gneissic Complex show similarity in the style and sequence of structures in all their details, the rocks of the Delhi Group trace a partly independent trend. Isoclinal folds of the first generation (AF1) in the rocks of the Aravalli Group had gentle westerly plunge prior to later deformations. These folds show reclined, inclined, and upright attitude as a result of coaxial upright folding (AFla). Superposition of upright folds (AF2) of varying tightness, with axial plane striking N to NNE, has resulted in interference patterns of diverse types in the scale of maps, and deformation of earlier planar and linear structures in the scale of hand specimens. The structures of the third generation (AF3) are either open recumbent folds or reclined conjugate folds with axial planes dipping gently towards NE or SW. Structures of the last phase are upright conjugate folds (AF4) with axial planes striking NNE-SSW and E-W. The Banded Gneissic Complex (BGC) underlies the Aravalli Group with a conglomerate horizon at the contact, especially in southern Rajasthan. But, for a major part of central and southern Rajasthan, migmatites representing BGC show a structural style and sequence identical with those in the Aravalli Group. Migmatization, broadly synkinematic with the AF1 folding, suggests extensive remobilization of the basement. Very rare relict fabric athwart to and overprinted by structures of AF, generation provide tangible evidence for a basement. Although the structures of later phases in the rocks of the Delhi Group (DF3 and DF4) match with the late-phase structures in the Aravalli Group (AF3 and AF4), there is a contrast in the structural history of the early stages in the rocks of the two groups. The folds of the first generation in the Delhi Group (DF1) were recumbent to reclined with gentle plunge towards N to NNE or S to SSW. These were followed by coaxial upright folds of varying tightness (DF2). Absence of westerly trending AF1 folds in the Delhi Group, and extreme variation in plunge of the AF2 folds in contrast with the fairly constant plunge of the DF2 folds, provide evidence for an angular unconformity between the Aravalli and the Delhi Groups. Depending on the importance of flattening attendant with and following buckling during AF2 deformation, the lineations of AF1 generation show different patterns. Where the AF1 lineations are distributed in circular cones around AF2 axes because of flexural-slip folding in layered rocks with high viscosity contrast, loci of early lineations indicate that the initial orientation of the AF1 axes were subhorizontal, trending towards N280°. The orientation of the axial planes of the earlier folds has controlled the development of the later folds. In sectors where the AF, axial planes had N-S strike and gentle dips, or E-W strike with gentle to steep dips, nearly E-W horizontal compression during AF2 deformation resulted in well-developed AF2 folds. By contrast, where the AF, axial planes were striking nearly N-S with steep dips, E-W horizontal compression resulted in tightening (flattening) of the already isoclinal AF1 folds, and probably boudinage structures in some instances, without the development of any AF2 folds. A similar situation obtains when DF4 deformation is superposed on earlier structures. Where the dominant S-planes were subhorizontal, N-S compression during DF4 deformation resulted in either chevron folds with E-W striking axial plane or conjugate folds with axial plane striking NE and NW. In zones with S-planes striking E-W and dipping steeply, the N-S compression resulted in flattening of the earlier folds without development of DF4 folds.  相似文献   

10.
《International Geology Review》2012,54(10):1353-1364
Slump structures traceable throughout Dagestan (northeastern Caucasus) for 250 to 300 km along the regional strike and 30 to 40 km downdip occur at nine stratigraphic levels in the Lower Tertiary (Paleocene and Eocene) section. Downdip at a given level the structures generally follow the sequence: 1) large included blocks and slabs; 2) smaller included blocks; 3) compound folds; 4) simple folds, and 5) plications and similar slight deformation. The slump structures are displaced normal to the regional strike, to the northeast, in successively younger beds. They probably were caused by earthquakes, and can be used to determine pleistoseismal areas. — D. C. Alverson.  相似文献   

11.
研究地区的地层属太古宙迁西群底部上川组。本文涉及其中一部分约4平方公里的面积。岩石都已高度变质,属麻粒岩相的区域紫苏辉石带。由于缺乏顶、底及面向(facing)标志,无法确定其确切层序。  相似文献   

12.
Blueschist-facies rocks of the central Seward Peninsula cropout over 8000 km2. Protoliths were Lower Paleozoic-Precambrian(?) shallow-water miogeoclinal sediments that were metamorphosed during the Middle Jurassic. Thermobarometric estimates yield ‘peak’ metamorphic conditions of 10–12 kbar at 460 ± 30°C. Crystallization of blueschist-facies minerals was synkinematic with development of a transposition foliation. This foliation is parallel to lithologic contacts and is axial planar to recumbent mesoscopic isoclinal folds. These folds are refolded by larger scale recumbent tight to isoclinal folds. Both fold sets have hinges parallel to a well-developed N—S stretching lineation. Sheath folds are also present. The long axes of the sheath folds also parallel the stretching lineation. This deformation was non-coaxial as indicated by microstructures and quartz c-axis fabrics. Folds nucleated, then rotated into parallelism with the stretching direction. Kinematic indicators show unequivocal top-to-the-north shear sense, compatible with blueschist formation during mid-Jurassic collision between the Brooks Range continental margin and a N-facing island arc (Yukon-Koyukuk). Convergence of these two plates is believed to have been nearly N—S (in present co-ordinates).  相似文献   

13.
Low-grade metamorphic rocks of Paleozoic–Mesozoic age to the north of Konya, consist of two different groups. The Silurian–Lower Permian Sizma Group is composed of reefal complex metacarbonates at the base, and flyschoid metaclastics at the top. Metaigneous rocks of various compositions occur as dykes, sills, and lava flows within this group. The ?Upper Permian–Mesozoic age Ardicli Group unconformably overlies the Sizma Group and is composed of, from bottom to top, coarse metaclastics, a metaclastic–metacarbonate alternation, a thick sequence of metacarbonate, and alternating units of metachert, metacarbonates and metaclastics. Although pre-Alpine overthrusts can be recognized in the Sizma Group, intense Alpine deformation has overprinted and obliterated earlier structures. Both the Sizma and Ardicli Groups were deformed, and metamorphosed during the Alpine orogeny. Within the study area evidence for four phases of deformation and folding is found. The first phase of deformation resulted in the major Ertugrul Syncline, overturned tight to isoclinal and minor folding, and penetrative axial planar cleavage developed during the Alpine crustal shortening at the peak of metamorphism. Depending on rock type, syntectonic crystallization, rotation, and flattening of grains and pressure solution were the main deformation mechanisms. During the F2-phase, continued crustal shortening produced coaxial Type-3 refolded folds, which can generally be observed in outcrop with associated crenulation cleavage (S2). Refolding of earlier folds by the noncoaxial F3-folding event generated Type-2 interference patterns and the major Meydan Synform which is the largest map-scale structure within the study area. Phase 3 structures also include crenulation cleavage (S3) and conjugate kink folds. Further shortening during phase 4 deformation also resulted in crenulation cleavage and conjugate kink folds. According to thin section observations, phases 2–4 crenulation cleavages are mainly the result of microfolding with pressure solution and mineral growth.  相似文献   

14.
First generation structures in greywackes of the Yuso Group from the Cantabrian Mountains of northern Spain show a distinct variation in geometry with depth in a regional synclinal structure (Curavacas and Lechada synclines); they are easily distinguished from other deformation events. In the structurally uppermost level we find ‘flap folds’. Flap folds are recumbent structures with the inverted limb preserved. Below this level ‘cascade folds’ are found. These structures have a vergence opposite to that of parasitic folds. The nomenclature adopted is from Harrison and Falcon. Characteristically, these structures have shallowly dipping axial surfaces, in agreement with the shallow dip of the axial plane (regional) cleavage. In the lowermost structural level, upright parasitic folds with a steep cleavage are present. The variation in fold geometry is accompanied by a general steepening of the regional cleavage with increasing depth. In the absence of overprinting relationships the F1 fold geometries are included in a single deformation event.The steepening of the cleavage with depth reflects the change in orientation of the maximum shortening direction from sub-vertical in the upper part of the syncline to sub-horizontal in the lower part. With increasing depth the deformation regime during F1 changed from bending to buckling. The deformation regime on the regional scale, however, is associated with basement subsidence and passive formation of the regional synclinal structure. Furthermore, the absence of a distinct microfabric for the different F1 folds indicates that on a small scale a similar deformation regime was present. We conclude, therefore, that the scale at which we study a structure only reflects the deformation regime at that particular scale. Consequently, the overall deformation regime cannot be determined from single outcrops or microstructural analysis alone.  相似文献   

15.
The Arpont-Parrachée region in the southern Vanoise massif comprises a stack of minor fold- and thrust-nappes that were emplaced during subduction and closure of the Piémont ocean basin in Late Cretaceous to Eocene time. The stack includes the Arpont nappe, composed mainly of pre-Permian schist metamorphosed to blueschist facies early in the Alpine history, and several sheets of Permian to Eocene metasedimentary rocks. Nappe formation, recumbent folding, and associated ductile deformation postdated the high-pressure metamorphic peak, and probably involved translation to the northwest. The rocks were then refolded by large- and small-scale folds trending roughly E-W. These deformational events were accompanied by a decrease in metamorphic pressure, indicating uplift. They were followed by regional greenschist-facies metamorphism, which caused breakdown of high-pressure parageneses, annealing of microstructures, and widespread growth of albite porphyroblasts. The entire nappe pile was then refolded by large- and small-scale folds overturned towards the southeast. Reorientation of small-scale structures with increasing strain by this event indicates a large component of ESE-directed shear, which culminated in the formation of anastomosing ductile shear-zones.  相似文献   

16.
The Chengde-Pingquan region is located in the central part of the Yanshan Orogenic Belt (YOB). At Daheishan and Pingquan in the central YOB, thrusts and folds of variable trends are displayed in 2 km-scale fold interference patterns. Detailed field mapping was conducted to decipher the geometry of these two superimposed structures. Map-view geometry and stereonet plots for outcrop-scale folds indicate that the superimposed structures form arrowhead interference pattern where NW-SE-trending F1 folds are refolded by later ENE-WSW F2 folding. After remove the effects of later faulting, restored map-views of the superimposed structures show that when the F1 folds have inclined axial surfaces but with no an overturned limb, an arrowhead interference pattern (here called modified type-2 pattern) can form. Our field data and reinterpretation of the findings of previous studies suggest that five major shortening phases have occurred in the Chengde-Pingquan region. The first two phases, which formed the superimposed folds, occurred earlier than the Late Triassic (D1) and during the Late Triassic to Early Jurassic (D2). These two phases were followed by three deformation phases that are mainly characterized by thrusting and strike-slip faulting, which strongly modified the large-scale fold interference patterns.  相似文献   

17.
The geometry of experimentally developed superimposed buckle folds with internal tangential longitudinal strain in a single competent layer embedded in an incompetent host is analysed.It has been found that the first-generation folds are not refolded in the same way as a lineation. On the contrary, they have a great influence on the development and geometry of the second-generation folds.Outcrop patterns quite similar to those occurring in natural rock complexes were formed in the experiments in a way which is not in agreement with the explanation usually given to such patterns.When the layer developed folds only in a zone, and not throughout the layer, and the bulk of material was only able to expand upward, it was found that the layer became bent in such a way that the folds are situated on the top of a broad antiformal structure. Fold-zone intersections are situated on broad domal structures.Within the upper surface of the competent layer, the finite strain variation is complicated within the fold areas while no strain is taken up by the unfolded parts of the layer.The possibility of finding similar structures in nature is considered.  相似文献   

18.
早元古代老岭群经历了三期构造变形，分别形成了三个特征各异的构造形迹组合。Ⅰ世代为层理榴皱组合，由斜卧诏皱、轴面片理和韧性剪切变形带组成；Ⅱ和Ⅲ世代为片理相皱组合，分别由各种位态的片理诏皱和轴面招劈理、膝折面理组合。Ⅰ、Ⅱ世代的原始构造线方位均为近南北向，为近共轴叠加，但固Ⅲ世代构造的改造，现今多变位为北东东向。Ⅰ世代构造形迹组合的特征显示老岭群的早期构造环境具有构造层次较深、以近水平韧性剪切变形作用为主导的特点。  相似文献   

19.
The ENE-plunging macroscopic folds, traced by calc gneiss interbanded with marble and sillimanite schist within the Peninsular Gneiss around Suganapuram in the ‘Palghat gap’ in southern India, represent structures of the second generation (D2). They have folded the axial planes of a set of D1 isoclinal folds on stratification coaxially, so that the mesoscopic D1 folds range from reclined in the hinge zones, through inclined to upright in the limb zones of the D2 folds. Orthogonal relation between stratification and axial planar cleavage, and ‘M’ shaped folds on layering locate the hinge zones of the D1 folds, whereas folds on axial planar cleavage with ‘M’ shaped folds are the sites of the D2 fold hinges. Extreme variation in the shapes of the isoclinal D1 folds from class 1B through class 1C to nearly class 2 of Ramsay is a consequence of buckling followed by flattening on layers of widely varying viscosity contrast. The large ENE-trending structures in this supracrustal belt within the Peninsular Gneiss in the ‘Palghat gap’ could not have evolved by reorientation of NS-trending structures of the Dharwar tectonic province to the north by movement along the Moyar-Bhavani shear zone which marks the boundary between the two provinces. This is because the Moyar and Bhavani faults are steep dipping reverse faults with dominant dip-slip component. Deceased  相似文献   

20.
Progressive ductile shearing in the Phulad Shear Zone of Rajasthan, India has produced a complex history of folding, with development of planar, non-planar and refolded sheath folds. There are three generations of reclined folds, F1, F2 and F3, with a striping lineation (L1) parallel to the hinge lines of F1. The planar sheath folds of F1 have long subparallel hinge lines at the flanks joining up in hairpin curves at relatively small apices. L1 swerves harmoniously with the curving of F1 hinge line. There is a strong down-dip mineral lineation parallel to the striping lineation in most places, but intersecting it at apices of first generation sheath folds. Both the striping and the mineral lineation are deformed in U-patterns over the hinges of reclined F2 and F3. Folding of axial surfaces and hinge lines of earlier reclined folds by later folds was accompanied by very large stretching and led to the development of non-planar sheaths. The reclined folds of all the three generations were deformed by a group of subhorizontal folds. Each generation of fold initially grew with the hinge line at a very low angle with the Y-axis of bulk non-coaxial strain and was subsequently rotated towards the down-dip direction of maximum stretching. The patterns of deformed lineations indicate that the stretching along the X-direction was extremely large, much in excess of 6000 percent.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号