共查询到20条相似文献，搜索用时 31 毫秒
1.
《International Geology Review》2012,54(4):692-696
This book review takes the authors to task for omitting numerous references when they wrote this first comprehensive work on thallium. Among the omissions noted are; 1) the extreme toxicity of thallium; 2) the occurrence of thallium in various minerals:
Table 相似文献
2.
《International Geology Review》2012,54(9):987-999
Many localities of the Gotlandian rocks have been found in the Outer Zone of Southwest Japan since Kobayashi and Iwaya's discovery of Halysites-bearing limestone at Imose, Kochi Prefecture, Shikoku in 1940. However, little has been done in their stratigraphy and paleontology. Here, the writer describes a tentative division of the Gotlandian strata with reference to the Halysitidae. The bed G4, which is composed of thick acidic volcanic and clastic materials, is presumed to be the Gotlandio-Devonian passage bed, and is correlated to the Takainari, Ono and the, lower half of the Nakazato series in the Kitakami mountains, Northeast Honshu, because of the predominance of acidic rocks. The so-called Upper Gotlandian Fukuji formation in Gifu Prefecture, Hida plateau is also brought into comparison. The strong acidic volcanic activities in these Gotlandio-Devonian rocks suggest that the “Oboke sandstone schists” in the lower part of the so-called Sambagawa metamorphic complex of the Sakawa orogenic zone are the G4 equivalent which has been deposited near the axis of the Chichibu geosyncline. The reef-limestone facies was shifted from the Outer to the Inner Zone of West Japan at the beginning of the Devonian period. Simultaneously with the shifting, Minamihiura and other unconformities might have been produced in the lower part of the Sambagawa system. The Kunimiyarna acidic igneous intrusion was probably the forerunner of this movement. These geological events in Japan may be related to the Kwangsi disturbance in South China. The stratigraphy of the Gotlandio-Devonian rocks in the Outer Zone of Southwest Japan is in descending order as follows:
Table 相似文献
3.
This article presents a comparison between two two-dimensional finite volume flood propagation models: SRH-2D and Hydro_AS-2D. The models are compared using an experimental dam-break test case provided by Soares-Frazão (J Hydraul Res, 2007. doi: 10.1080/00221686.2007.9521829). Four progressively refined meshes are used, and both models react adequately to mesh and time step refinement. Hydro_AS-2D shows some unphysical oscillations with the finest mesh and a certain loss of accuracy. For that test case, Hydro_AS-2D is more accurate for all meshes and generally faster than SRH-2D. Hydro_AS-2D reacts well to automatic calibration with PEST, whereas SRH-2D has some difficulties in retrieving the suggested Manning’s roughness coefficient. 相似文献
4.
《International Geology Review》2012,54(16):1906-1917
This article presents the first palaeomagnetic results from 13 independent cooling units in the Chiapanecan Volcanic Arc (ChVA). Six sites were directly dated by Ar–Ar or K–Ar methods: their dates range from 2.14 to 0.23 Ma. We isolated the characteristic palaeodirections for all 13 lavas. Eleven non-transitional directions yield a mean direction with inclination, I?=?30.7°, declination, D?=?4.1°, and precision parameters k?=?63 and α95 = 5.8°. The corresponding mean palaeopole position is Plat = 83.3°, Plong = 203.8°, K?=?227, A 95 = 5.1°. The mean inclination is in good agreement with the expected value for the last 5 million years, as derived from the synthetic North American polar wander path [Besse and Courtillot 2002, Apparent and true polar wander and the geometry of the magnetic field in the last 200 million years: Journal of Geophysical Research, v. 107, no. B11, p. 2300], but a measured rotation of the palaeodeclination of about 8° with respect to the expected direction suggests the possibility of a clockwise rotation of the studied ChVA units. We have estimated the characteristics of palaeosecular variation through study of the scatter of virtual geomagnetic poles, obtaining a palaeosecular variation parameter S b = 14.5° with upper limit S U = 19.6° and lower limit S L = 11.7°, in reasonable agreement with the fit of model G [McFadden et al., 1988, Dipole/quadrupole family modeling of paleosecular variation: Journal of Geophysical Research, v. 93, no. B10, p. 11583–11588; 1991, Reversals of the Earth's magnetic field and temporal variations of the dynamo families: Journal of Geophysical Research, v. 96, no. B3, p. 3923–3933] to the Johnson et al. [2008, Recent investigations of the 0–5 Ma geomagnetic field recorded by lava flows: Geochemistry, Geophysics, Geosystems, v. 9, no. 4, ID Q04032, doi:10.1029/2007GC001696] databases for the last 5 million years. In those cases in which age determinations are available, the polarity obtained for the studied flows is consistent with their stratigraphic positions, except for the Huitepec site, which probably reflects the transitional geomagnetic regime prior to the Matuyama–Brunhes geomagnetic reversal. 相似文献
5.
Rabi Narayan Behera Chittaranjan Patra 《Geotechnical and Geological Engineering》2018,36(5):3029-3080
Extensive laboratory model tests have been carried out on a strip footing resting over dry sand bed subjected to eccentrically inclined load to determine the ultimate bearing capacity (Patra et al. in Int J Geotech Eng 6(3):343–352, 2012a. https://doi.org/10.3328/IJGE.2012.06.03.343-352, Int J Geotech Eng 6(4):507–514, b. https://doi.org/10.3328/IJGE.2012.06.04.507-514). Similarly, lower bound calculations based on finite element method were performed to compute the bearing capacity of a strip footing subjected to an eccentric and inclined load lying over a cohesionless soil with varying embedment depth and relative density (Krabbenhoft et al. in Int J Geomech ASCE, 2014. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000332). The load may be applied in two ways namely, towards the center line and away from the center line of the footing. Based on the results (both experimental and numerical analyses), a neural network model is developed to predict the reduction factor that will be used in computing the ultimate bearing capacity of an eccentrically inclined loaded strip footing. This reduction factor (RF) is the ratio of the ultimate bearing capacity of the footing subjected to an eccentrically inclined load to the ultimate bearing capacity of the footing subjected to a centric vertical load. A thorough sensitivity analysis is carried out to evaluate the parameters affecting the reduction factor. Based on the weights of the developed neural network model, a neural interpretation diagram is developed to find out whether the input parameters have direct or inverse effect on the output. A prediction model equation is framed with the trained weights of the neural network as the model parameters. The predictions from ANN, and those from other approaches, are compared with the results computed from both experimentation and FEM analyses. The ANN model results are found to be more accurate and well matched with other results. 相似文献
6.
《International Geology Review》2012,54(8):980-1002
The Sungun porphyry copper deposit of northwestern Iran is associated with Miocene diorite/granodiorite to quartz-monzonite intrusive into Eocene volcanic–sedimentary and Cretaceous carbonate rocks. Three main mineralization-related alteration episodes (I, potassic; II, transition; and III, phyllic alterations) were studied in terms of mass transfer during hydrothermal evolution of the Sungun deposit. Isocon plots (Grant, J.A. 1986, The isocon diagram – a simple solution to Gresens’ equation for metasomatic alteration: Economic Geology, v. 81, p. 1976–1982) were employed to illustrate these changes quantitatively. These plots illustrate that Al, Ti, and Ga were relatively immobile during alteration, and that the alteration was essentially mass-conservative. At all stages in the evolution of the hydrothermal system, computed volume changes were close to zero. In the potassic alteration zone, an obvious enrichment of K and depletions of Na, Ca, Mn, and Fe took place. These changes were due to replacement of plagioclase and amphibole by K-feldspar and biotite, respectively. Potassic alteration was associated with significant addition of Cu, as might be expected from the occurrence of disseminated chalcopyrite and bornite in this zone. In the transition alteration zone, Ca was added, Na, Fe, and Mg were relatively unchanged, and K, Ba, and Cu were depleted. The loss of K and Ba relative to Na reflects replacement of K-feldspar by albite. Phyllic alteration was accompanied by the depletion of Na, K, Fe, and Ba and enrichment of Si and Cu. The losses of Na, K, and Fe reflect the sericitization of alkali feldspar and destruction of ferromagnesian minerals. The addition of Si is consistent with the widespread silicification, which is a major feature of phyllic alteration and the addition of Cu with mobilization from the transition zone, which is depleted in this element. 相似文献
7.
AbstractBrocx and Semeniuk’s (2019) paper is discussed, particularly in relation to the concept of geodiversity and their proposed sequence of ‘8Gs’. Their ideas on these topics are at odds with the majority of published papers and Internet sources on geodiversity. We argue that geodiversity as a concept has real value and that (a) the planet’s geodiversity occurs at all scales from global downwards, (b) it deserves an absolutely central place in any sequence of ‘Gs’ since it is the backbone of international and national geoheritage and geoconservation strategies, and the basis for geoheritage assessments, and (c) that as well as underpinning biodiversity, geodiversity is the source of many other geosystem services, including geotourism. Finally, a revised proposal for the relationship between geology, geodiversity, geoheritage, geoconservation and other ‘Gs’ is presented. 相似文献
8.
Soumyajit Mukherjee 《Arabian Journal of Geosciences》2017,10(12):268
This work derives algebraic expressions for Airy-type isostatic equilibrium and disequilibrium of lithospheric blocks within asthenosphere, considering a more realistic case of continuously varying densities of the lithosphere along mutually perpendicular directions. Isostatic (dis)equilibrium must be linked to the porosity and density of the rock matrix, and to pore fluid density since these factors govern the bulk density of wet sediments/porous rocks. Two combinations of exponential and linear increase of density with depth are demonstrated. Isostatic disequilibrium would speed up sinking/uplift of the lithospheric blocks. Given any other (empirical) equations for density variation in three perpendicular directions, isostatic (dis)equilibrium such as Eqs. 14, 17, 18, 28, and 29 can be theorized as well. 相似文献
9.
Francisco Gutiérrez Pedro Lucha Jesús Guerrero Mateo Gutiérrez Domingo Carbonel 《International Journal of Earth Sciences》2012,101(2):579-585
This discussion is focused on three aspects of the paper published by Lafuente et al. (Int J Earth Sci, doi: 10.1007/s00531-010-0542-1, 2010) on Concud Fault, constitute the fundamental basis to assess the seismic potential of this capable structure: (1) A slip rate estimated for the Concud Fault based on an erroneous displacement value and a questionable correlation, obviating previously published datings, markedly different to those used by the authors. The wrong displacement value introduces an error of more than 25% in the calculated Quaternary slip rate. (2) A new paleoseismological interpretation of the outcrop of Condud Fault at Los Baños, adding two improperly justified paleoearthquakes to the four events previously inferred. (3) The attribution of faults affecting a young terrace to the most recent recorded earthquake on Concud Fault, ruling out implicitly the likely option of a gravitational origin for them, either landsliding or subsidence due to evaporite dissolution. 相似文献
10.
Micro-mechanical failure analysis of wet granular matter 总被引：1，自引：1，他引：0
We employ a novel fluid–particle model to study the shearing behavior of granular soils under different saturation levels, ranging from the dry material via the capillary bridge regime to higher saturation levels with percolating clusters. The full complexity of possible liquid morphologies Scheel et al. (Nat Mater 7(3):189–193, 2008. doi: 10.1038/nmat2117) is taken into account, implying the formation of isolated arbitrary-sized liquid clusters with individual Laplace pressures that evolve by liquid exchange via films on the grain surface Melnikov et al. (Phys Rev E 92(022):206, 2015. doi: 10.1103/PhysRevE.92.022206). Liquid clusters can grow in size, shrink, merge and split, depending on local conditions, changes of accessible liquid and the pore space morphology determined by the granular phase. This phase is represented by a discrete particle model based on contact dynamics Brendel et al. (Contact dynamics for beginners. Wiley-VCH, Weinheim, 2005. doi: 10.1002/352760362X.ch14), where capillary forces exerted from a liquid phase add to the motion of spherical particles. We study the macroscopic response of the system due to an external compression force at various liquid contents with the help of triaxial shear tests. Additionally, the change in liquid cluster distributions during the compression due to the deformation of the pore space is evaluated close to the critical load. 相似文献
11.
Impacts of climate change have been observed in natural systems and are expected to intensify in future decades (IPCC in Contribution of Working Groups I, II and III to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change IPPC, Geneva, 2014). Governments are seeking to establish adaptive measures for minimizing the effects of climate change on vulnerable citizen groups, economic sectors and critical infrastructure (Adger et al. in Global Environ Change 15(2):77–86, 2005. doi: 10.1016/j.gloenvcha.2004.12.005; Smit and Wandel in Global Environ Change 16(3):282–292, 2006. doi: 10.1016/j.gloenvcha.2006.03.008). Coastal areas are particularly vulnerable to changing conditions due to rising sea levels and storm event intensification that produce new flood exposures (Richards and Daigle in Government of Prince Edward Island, Halifax, Nova Scotia, 2011 http://www.gov.pe.ca/photos/original/ccscenarios.pdf). However, communities oftentimes lack access to locally-relevant climate change information that can support adaptation planning. This research introduces the use of a Geoweb tool for supporting local climate change adaptation efforts in coastal Canadian communities. The Geoweb tool (called “AdaptNS”) is a web-based visualization tool that displays interactive flood exposure maps generated using local climate change projections of sea level rise and storm surge impacts between the years 2000 and 2100. AdaptNS includes participatory features that allow users to identify and share specific locations to protect against present and future coastal flood events. By soliciting feedback from community members, AdaptNS is shown to support local adaptation through the provision of flood exposure visuals, as a platform for identifying adaptation priorities, and as an avenue to communicate local risks to external entities that could facilitate local adaptation initiatives (e.g. upper levels of government). Future Geoweb research directions include improving the visualization of climate change projection uncertainties, the expansion of informational and participation capabilities, and understanding the potential for long-term adoption of Geoweb tools in adaptation decision-making. 相似文献
12.
Atef Abdelhamied Elattaar 《Arabian Journal of Geosciences》2017,10(11):250
The echinoid fauna from the Miocene sedimentary succession cropping out south Wadi Tweirig, and Wadi Hommath, south Gebel Ataqa, NW Gulf of Suez, has been examined with the aim to known their stratigraphic and paleogeographic distribution. The Miocene succession includes two formations: Sadat Formation, unconformably overlying the middle/upper Eocene rocks at the base and Hommath Formation at the top. Twenty-eight echinoid species (8 regular and 20 irregular) belonging to 18 genera, 13 families, and 7 orders have been identified, systematically described, and illustrated in this work. Eleven species are recorded for the first time from Egypt: ten of these came from the Hommath Formation (Schizechinus cf. serresii Desor (1856), Schizechinus pentagonus Kier 1972, Clypeaster cf. martini des Moulins 1837, Scutella checchiae occidentalis Desio 1934, Scutella melitensis Airaghi 1902, Echinodiscus desori Duncan and Sladen 1883, Echinolampas cf. zeitensis Fourtau 1920, Schizaster lovisatoi Cotteau 1895, Agassizia (Agassizia) powersi Kier 1972, and Hemipatagus ocellatus Defrance (1827)), and one from the Sadat Formation (Clypeaster campanulatus Schlotheim (1820)). The identified fauna shows a strong affinity with the Mediterranean bio-province. 相似文献
13.
A. W. Momber 《Rock Mechanics and Rock Engineering》2016,49(2):467-475
A procedure for the estimation of distribution parameters of a Weibull distribution model K1 = f(KIc12/4/σC23/4) for solid particle erosion, as recently suggested in Rock Mech Rock Eng, doi: 10.1007/s00603-014-0658-x, 2014, is derived. The procedure is based on examinations of elastic–plastically responding rocks (rhyolite, granite) and plastically responding rocks (limestone, schist). The types of response are quantified through SEM inspections of eroded surfaces. Quantitative numbers for the distribution parameter K1 are calculated for 30 rock materials, which cover a wide range of mechanical properties. The ranking according to the parameter K1 is related to qualitative rock classification schemes. A modified proposal for the erosion of schist due to solid particle impingement at normal incidence is introduced. 相似文献
14.
The Cape Verde hotspot, like many other Ocean Island Basalt provinces, demonstrates isotopic heterogeneity on a 100–200 km scale. The heterogeneity is represented by the appearance of an EM1-like component at several of the southern islands and with a HIMU-like component present throughout the archipelago. Where the EM1-like component is absent, a local DMM-like component replaces the EM1-like component. Various source lithologies, including peridotite, pyroxenite and eclogite have been suggested to contribute to generation of these heterogeneities; however, attempts to quantify such contributions have been limited. We apply the minor elements in olivine approach (Sobolev et al. in Nature 434:590–597, 2005; Science, doi: 10.1126/science.1138113, 2007), to determine and quantify the contributions of peridotite, pyroxenite and eclogite melts to the mantle heterogeneity observed at Cape Verde. Cores of olivine phenocrysts of the Cape Verde volcanics have low Mn/FeO and low Ni*FeO/MgO that deviate from the negative trend of the global array. The global array is defined by mixing between peridotite and pyroxenite, whereas the Cape Verde volcanics indicate contribution of an additional eclogite source. Eclogite melts escape reaction with peridotite either by efficient extraction in an area of poor mantle flow or by reaction of eclogite melts with peridotite, whereby an abundance of eclogite can seal off the melt from further reaction. Temporal trends of decreasing Mn/FeO indicate that the supply of eclogite melts is increasing. Modelling suggests the local DMM-like end-member is formed from a relatively peridotite-rich melt, while the EM1-like end-member has a closer affinity to a mixed peridotite–pyroxenite–eclogite melt. Notably the HIMU-like component ranges from pyroxenite–peridotite-rich melt to one with up to 77 % eclogite melt as a function of time, implying that sealing of melt pathways is becoming more effective. 相似文献
15.
Wellbore attributes (i.e., deviation, casings and plugging characteristics) for 85 wells in the St. Lawrence Lowlands basin of southern Quebec were compiled from drilling reports and abandonment programs to provide an overview of the abandoned well characteristics and to establish a diagnosis on the long-term reliability of the completion and abandonment practices carried out by the companies since the beginning of oil and gas exploration. Using these data, the conventional and unconventional wells were divided into four categories: (1) conventional wells drilled before 1950, (2) conventional wells drilled between 1950 and 1970, (3) conventional wells drilled after 1970 and shale gas wells (all drilled after 2000). Very little information was available for wells drilled before 1950. More information was available for the wells drilled from 1950 to 1970 which is considered a transition period between old and modern technology. Conventional and unconventional wells drilled after 1970 were generally well documented and their attributes corresponded to API standards. A decision tree, inspired from the methodology proposed by Watson and Bachu (SPE Drill Complet 24(1):115–126, 2009. https://doi.org/10.2118/106817-PA), was then created to assess the potential of leakage of each of the conventional and unconventional wells using the compiled attributes. The factors defining the probability of well leakage were wellbore deviation, height of cement in casing annuli (partially or fully cemented), type of abandonment plugs (cement or mechanical plugs) and drilling date (before or after 1970). Among the 85 wells assessed by this tree, the probability of leakage was higher than 50% for 55 wells (65% of wells). Wellbore deviation and lack of information on the construction and abandonment methods were respectively the primary and secondary causes of high probability of leakage of these wells. 相似文献
16.
The garnet–orthopyroxene pairs are commonly found in the assemblages of basic granulites/charnockite and hence are suitable for estimating equilibrium temperature of these metamorphic rocks. At present, there are many calibrations of garnet–orthopyroxene thermometer that may confuse geologists in choosing a reliable thermometer. To test the accuracy of the garnet–orthopyroxene thermometers, we have applied 14 models formulated by a number of workers since 1980 to date. We have collated 51 samples from the literature all over the world, which has been processed through the “Gt-Opx.EXE” software. Based on the present study, we have identified a set of the best among all the 14 models which were considered under this comparative study. We have concluded that the five garnet–orthopyroxene (Gt-Opx) thermometers are the most valid and reliable of this kind of thermometer: Aranovich and Berman (Am Mineral 82:345–353, 1997), Raith et al. (Earth Sci 73:211–244, 1983), Harley (Contrib Mineral Petrol 86:359–373, 1984), Nimis and Grütter (Contrib Mineral Petrol 159:411–427, 2010), and Sen and Bhattacharya (Contrib Mineral Petrol 88:64–71, 1984). 相似文献
17.
Earth Science community depends on the exploration, analysis and reprocessing of high volumes of data as well as the modeling and simulation of complex coupled systems on multiple scales. The main aim of this article is to introduce a new hydrological modeling service based on the Soil and Water Assessment Tool (SWAT) (Arnold et al. J American Water Resour Assoc 34(1), 73–89, 1998 ; Arnold and Fohrer Hydrol Process 19(3), 563–572, 2005) model using high efficiency, resource sharing and low cost cloud computing resources (Astsatryan et al. International Journal of Scientific & Engineering Research 1(1), 1130–1133, 2014). Such a Desktop as a Service (DaaS) approach allowing users to work from anywhere, and gives centralized desktop management and great performance. Within the Spatial Data Infrastructure (SDI) and cloud platform, the DaaS service gives secure access to the model and a centralized data storage to get a SWAT model input. The article illustrates the analyses of the implementation of the SWAT model for the Sotk watershed of Lake Sevan in Armenia (Sargsyan 2007). 相似文献
18.
The authors (Lloret-Cabot et al. in Acta Geotech 1–23, 2017) applied the glasgow coupled model (GCM), originally proposed by Wheeler et al. (Géotechnique 53(1):41–54, 2003), to the simulation of several experimental tests that involve transition between saturated and unsaturated states. The authors show qualitatively, but not quantitatively, predictions of GCM for shrinkage during air drying of normally consolidated samples (Fig. 13) under low mechanical stress conditions, without presenting the material parameters. The discussers, who have worked with GCM to model multilayer deposition of tailings/soft soils (Qi in Numerical investigation for slope stability of expansive soils and large strain consolidation of soft soils. Doctoral dissertation, University of Ottawa, 2017; Qi et al. in J Geotech Geoenviron Eng 143(7):04017018, 2017, Qi et al. J Geotech Geoenviron Eng 143(7):04017019, 2017), have made quantitative predictions of similar cases. Satisfactory simulations of such cases using GCM are sensitive to the selection of the coupling parameters k1 and k2. By considering an alternative analytical form of GCM, an analytical procedure can be derived for calibrating the coupling parameters for problems involving virgin drying. 相似文献
19.
The 2010 eruption of the Eyjafjallajökull volcano had a devastating effect on the European air traffic network, preventing air travel throughout most of Europe for 6 days (Oroian in ProEnvironment 3:5–8, 2010). The severity of the disruption was surprising as previous research suggests that this type of network should be tolerant to random hazard (Albert et al. in Nature 406(6794):378–382, 2000; Strogatz in Nature 410(6825):268–276, 2001). The source of this hazard tolerance lies in the degree distribution of the network which, for many real-world networks, has been shown to follow a power law (Albert et al. in Nature 401(6749):130–131, 1999; Albert et al. in Nature 406(6794):378–382, 2000). In this paper, we demonstrate that the ash cloud was unexpectedly disruptive because it was spatially coherent rather than uniformly random. We analyse the spatial dependence in air traffic networks and demonstrate how the combination of their geographical distribution and their network architectures jeopardises their inherent hazard tolerance. 相似文献
20.
《Geomechanics and Geoengineering》2013,8(2):149-158
The objective of the paper is to derive the strength and modulus properties of rockmass as a function of intact rock strength and joint factor. The joint factor reflects the combined effect of joint frequency, joint inclination and joint strength. A study for the strength and deformation characteristics of jointed rock is done by conducting standard laboratory tests on cylindrical specimens of plaster of Paris after introducing artificial joints. The specimens having one to four joints at different inclinations which vary from 0° to 90° were tested at different confining conditions. The test results were examined to understand the effect of joint frequency and joint inclination on the strength and deformation behaviour of rock mass. Empirical correlations were developed for prediction of the uniaxial compressive strength and elastic modulus of jointed rocks. Results are compared with the earlier work on jointed specimens covering a wide variety of rocks. So, knowing the intact rock properties and the joint factor, the jointed rock properties can be estimated. These relations can be used for developing an equivalent continuum model for rock mass for handling boundary value problems. A failure criterion as proposed by Ramamurthy (1993) has been validated from these experimental results. 相似文献