首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 39 毫秒
1.
曹汇 《中国地质》2013,40(6):1818-1828
提要：美国东部阿巴拉契亚造山带北端缅因州Rangeley地区志留—泥盆纪中温低压片岩测得的面理弯切轴与褶皱轴面数据有很好的对应关系。西部科迪勒拉造山带落基山脉南端科罗拉多州阿肯色河地区Texas Creek 以东高温低压前寒武纪堇青石片岩中测得的褶皱轴面方向和片理走向数据与该地区堇青石、斜长石变斑晶内测得的5期面理弯切轴也表现出很好的一致性。而在Rangeley北东200 km的佛蒙特州Chester Dome地区奥陶—泥盆纪中温中压片麻岩中测得的类似褶皱轴面数据却只反映了该地区5期面理弯切轴中较晚的北北西-南南东走向和北北东-南南西走向的两期面理弯切轴,未测得与其余3期面理弯切轴对应的褶皱轴面数据。通过对变质峰期温度相近、压力不同的两个造山带内3个典型变质岩区面理弯切轴、褶皱轴面方向和片理走向数据的对比分析认为,造山作用发生的地壳深度差异是早期褶皱经历多期造山运动后能否保存下来的主要影响因素。重力形成的去褶皱作用使得早期形成的规模较小褶皱经历复杂造山过程后难以保存。区域内早期形成的规模较大褶皱和造山过程晚期形成的褶皱由于受到重力塌陷作用影响较小,所以能够较好保存下来。  相似文献   

2.
The structural geometry of a mylonite zone (the Woodroffe thrust) and the country rock in its immediate vicinity is described. Mylonitic schistosity formed axial planar to folds in country rock foliation and contains a mineral elongation lineation which is constant in orientation. However, the fold axes (and associated intersection lineation) spread in orientation within the mylonitic schistosity but with a strong maximum parallel to the mineral elongation lineation. It is demonstrated that the fold axes formed initially at approximately 90° to mineral elongation but rotated with increase in strain towards it. Where this phenomenon was homogeneous on a macroscopic scale, rotation of large blocks of country rock across zones of mylonitization accompanied reorientation of fold axes within the mylonite.The controversy of progressive simple versus progressive pure shear for mylonite zones is discussed in the light of recent fabric and other evidence. It is concluded that the inhomogeneous forms of both progressive pure shear and progressive simple shear played a part and that the former dominated initially but gradually gave way to the latter until brittle rupture with large simple-shear displacements on a zone lubricated by the formation of pseudotachylite, brought granulite over amphibolite facies rocks.  相似文献   

3.
A method of kinematic analysis of structures, microstructuresand mineral preferred orientations, initially devised in the study of peridotites, has been applied to crustal rocks bearing evidence of large strains produced in metamorphic environments. Three tectonic lineaments (Angers-Lanvaux, Montagne Noire and Maydan) were selected. They illustrate a general situation arising in continental crusts when they are deformed by ductile transcurrent fault systems.The Angers-Lanvaux structure is bilaterally symmetric; its dominant feature is the horizontal stretching lineation which is parallel to the fold axes. The foliation and slaty cleavage in the most surficial formations wrap around the axis of the whole structure. The folds in the slates away from the axis also exhibit axes parallel to the general trend, but no stretching lineations. These folds are attributed to crustal shortening in a direction normal to the ductile fault. In the Montagne Noire recumbent folds are thrusted away from the axis of the structure over at least 25 km. The metamorphism is also centered on the structure and symmetrically reduced away from it. The core of the structure is occupied by a strongly lineated orthogneiss, cut by a late intrusive granite. The Maydan axial zone displays clear evidence of partial melting at various scales within the deformed gneisses: (1) in gashes perpendicular to the stretching lineation which in these anatectic formations tends to plunge at more than 45°; (2) in bands of deformed pegmatites; and (3) possibly in granites which on the one hand intrude the surrounding formations and on the other converge with increasing deformation on the fault zone. The quartz preferred orientations and microstructures in quartzite layers from Angers indicate that the plastic flow plane and direction lie, respectively, close to the foliation and lineation, the slight departure is ascribed to a flow with a rotational shear component.All this suggests a general model for the origin of such ductile zones. The horizontal relative displacement of crustal blocks along a ductile band is responsible for its overall steeply dipping foliation and horizontal lineations. Viscous heating progressively tends to concentrate the plastic flow along its axis. It is also responsible for the development of metamorphism and of anatexis at depth; the partially melted rocks tend to rise, building at shallower depth the arched structure in the axis of the ductile zone, with a continuing flowage parallel to this axis probably now in the solid state; they can also intrude the surrounding terrain as undeformed batholiths. The folds parallel to the stretching lineation in the axial zone are explained by the fact that, due to the escape of anatectic melts, the formations at depth flow in a narrowing channel. The upwelling of the axial structure induces a compression with folding in the surrounding sedimentary formations and gravity nappe sliding away from the axis.  相似文献   

4.
Three sheet‐like bodies of felsic gneiss containing abundant K‐feldspar megacrysts (megacrystic felsic gneiss, augen gneiss or granite gneiss) surrounding the Broken Hill Line of Lode in western New South Wales, Australia, are inferred to be pre‐ to syn‐D1 granitoids. We interpret the Feral gneiss to be a pre‐ to early syn‐D1 intrusion, as it contains S1 as its earliest foliation. However, it has no magmatic flow foliation. The Alma Gneiss, and the megacrystic portions of the Rasp Ridge Gneiss, northwest of the Line of Lode, both contain S1 parallel to a magmatic flow foliation, and are interpreted as having been magmatic during D1. Therefore, the Alma and Rasp Ridge Gneisses may have been intruded during D1, probably just after the Feral gneiss, as the Alma Gneiss intrudes the Feral gneiss. S1 in the augen gneisses and the wall rocks is defined by biotite, sillimanite, garnet and ribbon quartz, and indicates that high‐grade metamorphic conditions accompanied D1. Evidence suggesting that these rocks were originally granitoids includes: (i) the Alma Gneiss transecting and intricately intruding the Feral gneiss, the contacts being transected by S1; (ii) euhedral to subhedral K‐feldspar porphyroclasts (former phenocrysts), especially those with concentrically arranged inclusions; (iii) microgranitoid enclaves, particularly where megacrystic and relatively large; (iv) aplite dykes (most common in plutonic rocks and therefore reliable indicators); (v) metasedimentary xenoliths; (vi) magmatic flow foliations overprinted by parallel tectonic foliations; and (vii) chemical affinities with undoubted Australian Proterozoic granitoids. Therefore, felsic gneisses at Broken Hill should not be used for stratigraphic correlation, unless they can be definitely determined to be of volcanic flow or tuffaceous origin. The inferred intrusion of granitoids early in the tectonic history of the Broken Hill Block suggests that they may have contributed to the metamorphic and/or hydrothermal heat, and may have helped concentrate metals to form orebodies.  相似文献   

5.
A succession of 5 FIA trends（foliation intersection or inflection axes in porphyroblasts） preserved in high temperature-low pressure regime PreCambrian rocks in the Texas Creek, Arkansas River region reflected by the fold axial plane traces and schistosity data in this region. Similar fold axial plane trace data measured in Palaeozoic rocks in Chester Dome, Vermont, which is high temperature to medium pressure regime, only preserve the effects of the youngest FIAs of the all 5 FIA sets that obtained in this region. The other three FIA sets have no equivalent fold axial planes. This difference from shallow to deeper orogenic regimes reflects decreasing competency at greater pressure with collapse and unfolding of earlier formed folds. The greater overlying load of rocks has tended to flatten all but the very largest early-formed structures, preserving only those folds that were more recently developed.  相似文献   

6.

Granulite facies rocks on Else Platform in the northern Prince Charles Mountains, east Antarctica, consist of metasedimentary gneiss extensively intruded by granitic rocks. The dominant rock type is a layered garnetbiotite‐bearing gneiss intercalated with minor garnet‐cordierite‐sillimanite gneiss and calc‐silicate. Voluminous megacrystic granite intruded early during a mid‐Proterozoic (ca 1000 Ma) granulite event, M1, widely recognized in east Antarctica. Peak metamorphic conditions for M1 are in the range of 650–750 MPa at ～800°C and were associated with the development of a gneissic foliation, S1 and steep east‐plunging lineation, L1. Strain partitioning during progressive non‐coaxial deformation formed large D2 granulite facies south‐dipping thrusts, with a steep, east‐plunging lineation. In areas of lower D2 strain, large‐scale upright, steep east‐plunging fold structures formed synchronously with the D2 high‐strain zones. Voluminous garnet‐bearing leucogneiss intruded at 940 ±20 Ma and was deformed in the D2 high‐strain zones. Textural relationships in pelitic rocks show that peak‐M2 assemblages formed during increasing temperatures via reactions such as biotite + sillimanite + quartz ± plagioclase = spinel + cordierite + ilmenite + K‐feldspar + melt. In biotite‐absent rocks, re‐equilibration of deformed M1 garnet‐sillimanite‐ilmenite assemblages occurred through decompressive reactions of the form, garnet + sillimanite + ilmenite = cordierite + spinel + quartz. Pressure/temperature estimates indicate that peak‐M2 conditions were 500–600 MPa and 700±50°C. At about 500 Ma, north‐trending granitic dykes intruded and were deformed during D3‐M3 at probable upper amphibolite facies conditions. Cooling from peak D3‐M3 conditions was associated with the formation of narrow greenschist facies shear zones, and the intrusion of pegmatite. Cross‐cutting all features are abundant north‐south trending alkaline mafic dykes that were emplaced over the interval ca 310–145 Ma, reflecting prolonged intrusive activity. Some of the dykes are associated with steeply dipping faults that may be related to basin formation during Permian times and later extension, synchronous with the formation of the Lambert Graben in the Cretaceous.  相似文献   

7.
From a general understanding of the flow mechanisms in alpine-type peridotites, it is possible to describe without ambiguity the general flow regime and its directions in a massif. This result provides the means for an investigation of the origin of the folding in pyroxenitic layers independent of any preconceived theory on folding.The folds are usually isoclinal and of the flexural-flow type as demonstrated by petrofabric studies in hinges. Their axes are always parallel or subparallel to a mineral lineation which in turn is parallel or close to the orientation of the fabric elements defining the flow line. Their axial plane, which usually coincides with the foliation, is parallel to or close to the flow plane. This conclusion, also supported by paragenetic observations, shows that the folds were formed or transposed during the plastic flow responsible for the development of structures (foliation and lineation), textures and preferred mineral orientations. In the case of the Lanzo Massif and a few other Iherzolite massifs, the flow occurred during the intrusion from the mantle. The mapping in Lanzo yields evidence of a large-scale U-shaped fold with a remarkable pattern of mesoscopic folds attached to it: the tight isoclinal folds are restricted to the limbs of the largescale structure, and the open folds locally refolding former isoclinal ones to the hinge area where the angle between the folded pyroxenitic layering and the axial-plane foliation is large. Stereograms of the field structures in this hinge area clearly illustrate the geometric relations mentioned above.This folding, characterized by its axis and axial plane respectively close to the flow line and flow plane, can be explained either by rotation towards the flow line of non-cylindrical-fold axes or by direct formation in a non-plane flow when the flow line is initially contained in the layering or close to it. In this respect, the folding may bring information on the minor flow component, complementary to that given on the major flow component by considering the textures and fabrics. Finally this folding is shown to be ubiquitous in plastically deformed peridotites. It is proposed that these conclusions be extended to other domains submitted to intense non-plane flow.  相似文献   

8.
Shape, size and orientation measurements of quartz grains sampled along two transects that cross zones of increasing metamorphic grade in the Otago Schist, New Zealand, reveal the role of quartz in the progressive development of metamorphic foliation. Sedimentary compaction and diagenesis contributed little to the formation of a shape‐preferred orientation (SPO) within the analysed samples. Metamorphic foliation was initiated at sub‐greenschist facies conditions as part of a composite S1‐bedding structure parallel to the axial planes of tight to isoclinal F1 folds. An important component of this foliation is a pronounced quartz SPO that formed dominantly by the effect of dissolution–precipitation creep on detrital grains in association with F1 strain. With increasing grade, the following trends are evident from the SPO data: (i) a progressive increase in the aspect ratio of grains in sections parallel to lineation, and the development of blade‐shaped grains; (ii) the early development of a strong shape preferred orientation so that blade lengths define the linear aspect of the foliation (lineation) and the intermediate axes of the blades define a partial girdle about the lineation; (iii) a slight thinning and reduction in volume of grains in the one transect; and (iv) an actual increase in thickness and volume in the survivor grains of the second transect. The highest‐grade samples, within the chlorite zone of the greenschist facies, record segregation into quartz‐ and mica‐rich layers. This segregation resulted largely from F2 crenulation and marks a key change in the distribution, deformation and SPO of the quartz grains. The contribution of quartz SPO to defining the foliation lessens as the previously discrete and aligned detrital quartz grains are replaced by aggregates and layers of dynamically recrystallized quartz grains of reduced aspect ratio and reduced alignment. Pressure solution now affects the margins of quartz‐rich layers rather than individual grains. In higher‐grade samples, therefore, the rock structure is characterized increasingly by segregation layering parallel to a foliation defined predominantly by mica SPO.  相似文献   

9.
Abstract Reactivation of early foliations accounts for much of the progressive strain at more advanced stages of deformation. Its role has generally been insufficiently emphasized because evidence is best preserved where porphyroblasts which contain inclusion trails are present. Reactivation occurs when progressive shearing, operating in a synthetic anastomosing fashion parallel to the axial planes of folds, changes to a combination of coarse- and finescale zones of progressive shearing, some of which operate antithetically relative to the bulk shear on a fold limb. Reactivation of earlier foliations occurs in these latter zones. Reactivation decrenulates pre-existing or just-formed crenulations, generating shearing along the decrenulated or rotated pre-existing foliation planes. Partitioning of deformation within these foliation planes, such that phyllosilicates and/or graphite take up progressive shearing strain and other minerals accommodate progressive shortening strain, causes dissolution of these other minerals. This results in concentration of the phyllosilicates in a similar, but more penetrative manner to the formation of a differentiated crenulation cleavage, except that the foliation can form or intensify on a fold limb at a considerable angle to the axial plane of synchronous macroscopic folds. Reactivation can generate bedding-parallel schistosity in multideformed and metamorphosed terrains without associated folds. Heterogeneous reactivation of bedding generates rootless intrafolial folds with sigmoidal axial planes from formerly through-going structures. Reactivation causes rotation or ‘refraction’of axial-plane foliations (forming in the same deformation event causing reactivation) in those beds or zones in which an earlier foliation has been reactivated, and results in destruction of the originally axial-plane foliation at high strains. Reactivation also provides a simple explanation for the apparently ‘wrong sense’, but normally observed ‘rotation’of garnet porphyroblasts, whereby the external foliation has undergone rotation due to antithetic shear on the reactivated foliation. Alternatively, the rotation of the external foliation can be due to its reactivation in a subsequent deformation event. Porphyroblasts with inclusion trails commonly preserve evidence of reactivation of earlier foliations and therefore can be used to identify the presence of a deformation that has not been recognized by normal geometric methods, because of penetrative reactivation. Reactivation often reverses the asymmetry between pre-existing foliations and bedding on one limb of a later fold, leading to problems in the geometric analysis of an area when the location of early fold hinges is essential. The stretching lineation in a reactivated foliation can be radically reoriented, potentially causing major errors in determining movement directions in mylonitic schistosities in folded thrusts. Geometric relationships which result from reactivation of foliations around porphyroblasts can be used to aid determination of the timing of the growth of porphyroblasts relative to deformation events. Other aspects of reactivation, however, can lead to complications in timing of porphyroblast growth if the presence of this phenomenon is not recognized; for example, D2-grown porphyroblasts may be dissolved against reactivated S1 and hence appear to have grown syn-D1.  相似文献   

10.
Recent studies have claimed structural support for a syngenetic model of ore formation at Broken Hill. The structural features of the Line of Lode—foliation, lineation, boudinage, folding and shearing—are re‐evaluated and new data presented from several locations in and around the Line of Lode, including the Kintore Opencut and Readymix Quarries. Although deformation partitioning preserves areas of low strain, especially in the hangingwall, that exhibit primary features, the deformation history described shows a history of high‐strain on the Line of Lode. Gneisses in the wall rocks of the orebody show extreme extension in places, with destruction of primary layering and imposition of transposed tectonic fabrics. Sulfide bodies would have been softer than the wall rocks during deformation and any layering in the lodes is likely to be a result of tectonic processes rather than preserved bedding. The geometry of the orebody is described and its setting is revealed as a low‐strain site, a minor fold pair, that developed early in a major high‐grade shear zone. The orebody probably acquired its linear shape first as a result of mass transport of sulfides to this structural site and then by extension within the shear zone, an epigenetic process. Previous fold models for the Line of Lode are rejected, along with the application of regional stratigraphic units to the orebody footwall. Deformation of the Line of Lode before peak metamorphism is obscured by recrystallisation. Subsequent minor deformation occurred at both high metamorphic grade and under retrograde conditions to produce the range of features previously quoted in support of syngenesis. Sulfides were remobilised during both the post‐peak metamorphic high‐grade, and later low‐grade, deformation events.  相似文献   

11.
The anisotropy of magnetic susceptibility (AMS) of 351 specimens from 51 sites across the Ailao Shan–Red River shear zone (ASRR) was measured to determine its magnetic fabric. Rocks range westward from core schistose gneiss, through low-grade schist, to Triassic sediment. Magnetic ellipticity analysis shows that 41 of 51 sites have an oblate compressional fabric and the other 10 sites have a prolate fabric. PJ value drops by 22.4% in the low-grade schist and by 27.4% in the Triassic sediment on average with respect to the gneiss, suggesting a rapid decrease of deformational intensity. The directions of principal susceptibilities are closely related to the deformation of the Ailao Shan–Red River shear zone. The susceptibility plane always coincides with the schistosity or cleavage plane. Most of the maximum susceptibility axes trend NW–SE. In the shear zone, the maximum susceptibility axes (Kmax) are parallel to the lineation within the foliation plane. With increasing distance from the shear zone, there is a trend that they become parallel to the down-dip of reverse faults or cleavage. This indicates changes in deformation mode, inside and outside the shear zone. Within the shear zone, horizontal movement is dominant. Outside, shortening prevails. The overall minimum magnetic axes align NE–SW with subhorizontal to low dip angles, suggesting that the dominant shortening is NE–SW directed. Caution should be exercised when AMS is used to determine shear sense in strong shear zones because the angle between the minimum susceptibility axis (Kmin) and pole of foliation is small, and also because the attitude of foliation varies from place to place. They result in unreliable or even wrong shear sense. Another important result is the axial ratio of magnetic susceptibility ellipsoid along the study section. With these data, it is possible to establish an axial ratio relationship between the finite strain ellipsoid and magnetic susceptibility ellipsoid for quantitative calculation of offset.  相似文献   

12.
Ductilely deformed veins consisting of quartz+andalusite, in which the andalusite is partially replaced by fibrous sillimanite, locally occur in garnet–sillimanite schist near a margin of the Niğde metamorphic core complex in south-central Turkey. Mineral assemblages, reaction textures and structural features of the veins record low-pressure–high-temperature deformation during exhumation of mid-crustal rocks. The partial replacement of andalusite by sillimanite may indicate a late-stage increase in temperature and/or fluid pressure, possibly related to Miocene magmatism, during extensional unroofing of the core complex. Aluminosilicate-bearing veins are observed at the eastern margin of the massif where metapelitic rocks were deformed during unroofing of the core complex. Veins formed in aluminous rocks where deformation-enhanced permeability allowed fluid flow during extensional shear. The cm-scale veins are typically boudinaged and form asymmetric lenses concordant with the host rock foliation and are parallel to the down-dip lineation defined by sillimanite and stretched biotite. Aluminosilicate-bearing boudins record top-to-the-east shear sense, which is compatible with the extensional shear sense displayed by structures in the host rock.  相似文献   

13.
In the Wabigoon granite-greenstone belt, volcanic strata are folded isoclinally about vertical axes, and the strata and folds wrap around mushrooming intrusions of tonalitic gneiss. The vertical fold plunges of the volcanic strata may result from diapirism deflecting the pre-existing ESE verging and facing recumbent folds, Steep, post-tectonic metamorphic gradients cross-cut the axial surfaces. There is no consistent tectonic trend on the regional scale.In the adjacent Quetico slate and gneiss belt tectonic trends are consistently east-west. Metagreywackes are isoclinally folded with vertical, east-west axial planes. The folds have strongly curving periclinal axes so that the ‘structural facing’ of the strata varies from up-through sideways- to down-facing. Isograds are parallel to the east-west axial traces.These structural contrasts may be valid for much of the length of the Quetico and Wabigoon belts along their interface.  相似文献   

14.
In the history of superposed deformations of the iron formations at the western border of the Kolar Gold Field in S India, an important event was the successive growth of broadly coaxial plane noncylindrical folds in course of a progressive deformation concomitant with development of ductile mesoscopic shear zones. The noncylindrical folds were initiated as active folds by the creation of a buckling instability at successive stages on newly developed foliation surfaces. The nucleation of noncylindrical folds and the subsequent axial-plane folding of the tightened mature folds are explained by the mechanical inhomogeneity of the rocks and the heterogeneous character of strain. The correlation between increasing tightness and increasing noncylindricity of the folds indicates that the initial curvatures of hinge lines were accentuated by an extension parallel to the subhorizontal stretching lineation. From the patterns of deformed lineations over folds of varying tightnesses, it is concluded that the passive accentuation of hinge-line curvatures was mostly achieved when the folds had already become isoclinal or very tight.  相似文献   

15.
Structural, petrological and textural studies are combined with phase equilibria modelling of metapelites from different structural levels of the Roc de Frausa Massif in the Eastern Pyrenees. The pre‐Variscan lithological succession is divided into the Upper, Intermediate and Lower series by two orthogneiss sheets and intruded by Variscan igneous rocks. Structural analysis reveals two phases of Variscan deformation. D1 is marked by tight to isoclinal small‐scale folds and an associated flat‐lying foliation (S1) that affects the whole crustal section. D2 structures are characterized by tight upright folds facing to the NW with steep NE–SW axial planes. D2 heterogeneously reworks the D1 fabrics, leading to an almost complete transposition into a sub‐vertical foliation (S2) in the high‐grade metamorphic domain. All structures are affected by late open to tight, steeply inclined south‐verging NW–SE folds (F3) compatible with steep greenschist facies dextral shear zones of probable Alpine age. In the micaschists of the Upper series, andalusite and sillimanite grew during the formation of the S1 foliation indicating heating from 580 to 640 °C associated with an increase in pressure. Subsequent static growth of cordierite points to post‐D1 decompression. In the Intermediate series, a sillimanite–biotite–muscovite‐bearing assemblage that is parallel to the S1 fabric is statically overgrown by cordierite and K‐feldspar. This sequence points to ~1 kbar of post‐D1 decompression at 630–650 °C. The Intermediate series is intruded by a gabbro–diorite stock that has an aureole marked by widespread migmatization. In the aureole, the migmatitic S1 foliation is defined by the assemblage biotite–sillimanite–K‐feldspar–garnet. The microstructural relationships and garnet zoning are compatible with the D1 pressure peak at ~7.5 kbar and ~750 °C. Late‐ to post‐S2 cordierite growth implies that F2 folds and the associated S2 axial planar leucosomes developed during nearly isothermal decompression to <5 kbar. The Lower series migmatites form a composite S1–S2 fabric; the garnet‐bearing assemblage suggests peak P–T conditions of >5 kbar at suprasolidus conditions. Almost complete consumption of garnet and late cordierite growth points to post‐D2 equilibration at <4 kbar and <750 °C. The early metamorphic history associated with the S1 fabric is interpreted as a result of horizontal middle crustal flow associated with progressive heating and possible burial. The upright F2 folding and S2 foliation are associated with a pressure decrease coeval with the intrusion of mafic magma at mid‐crustal levels. The D2 tectono‐metamorphic evolution may be explained by a crustal‐scale doming associated with emplacement of mafic magmas into the core of the dome.  相似文献   

16.
North Norfolk is a classic area for the study of glacial sediments with a complex glaciotectonic deformational history, but the processes leading to the formation of some structures can be ambiguous. Anisotropy of magnetic susceptibility (AMS) analyses, providing quantitative fabric data, have been combined with the analysis of visible structures and applied to the Bacton Green Till Member, exposed at Bacton, Norfolk. Thermomagnetic curves, low temperature susceptibility and acquisition of isothermal remanent magnetism (IRM) reveal that the magnetic mineralogy is dominated by paramagnetic phases. The magnetic foliation is parallel to fold axial planes and weakly inclined to bedding, whilst the magnetic lineation is orientated parallel to stretching, indicated by the presence of stretching lineations and the trend of sheath folds. Variations in the orientation of the magnetic lineation suggest that the Bacton section has been subject to polyphase deformation. After subaqueous deposition, the sequence was overridden by ice and glaciotectonically deformed which involved stretching initially north–south, then east–west. These results show that AMS can be used to detect strain in three dimensions through a glaciotectonite where paramagnetic mineralogy is dominant. This approach therefore provides further support to the use of AMS as a fast, objective and accurate method of examining strain within deformed glacial sediments.  相似文献   

17.
Transpressional deformation has played an important role in the late Neoproterozoic evolution of the ArabianNubian Shield including the Central Eastern Desert of Egypt. The Ghadir Shear Belt is a 35 km-long, NW-oriented brittleductile shear zone that underwent overall sinistral transpression during the Late Neoproterozoic. Within this shear belt, strain is highly partitioned into shortening, oblique, extensional and strike-slip structures at multiple scales. Moreover, strain partitioning is heterogeneous along-strike giving rise to three distinct structural domains. In the East Ghadir and Ambaut shear belts, the strain is pure-shear dominated whereas the narrow sectors parallel to the shear walls in the West Ghadir Shear Zone are simple-shear dominated. These domains are comparable to splay-dominated and thrust-dominated strike-slip shear zones. The kinematic transition along the Ghadir shear belt is consistent with separate strike-slip and thrustsense shear zones. The earlier fabric(S1), is locally recognized in low strain areas and SW-ward thrusts. S2 is associated with a shallowly plunging stretching lineation(L2), and defines ～NW-SE major upright macroscopic folds in the East Ghadir shear belt. F2 folds are superimposed by ～NNW–SSE tight-minor and major F3 folds that are kinematically compatible with sinistral transpressional deformation along the West Ghadir Shear Zone and may represent strain partitioning during deformation. F2 and F3 folds are superimposed by ENE–WSW gentle F4 folds in the Ambaut shear belt. The sub-parallelism of F3 and F4 fold axes with the shear zones may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation in fold zones. Dextral ENEstriking shear zones were subsequently active at ca. 595 Ma, coeval with sinistral shearing along NW-to NNW-striking shear zones. The occurrence of upright folds and folds with vertical axes suggests that transpression plays a significant role in the tectonic evolution of the Ghadir shear belt. Oblique convergence may have been provoked by the buckling of the Hafafit gneiss-cored domes and relative rotations between its segments. Upright folds, fold with vertical axes and sinistral strike-slip shear zones developed in response to strain partitioning. The West Ghadir Shear Zone contains thrusts and strikeslip shear zones that resulted from lateral escape tectonics associated with lateral imbrication and transpression in response to oblique squeezing of the Arabian-Nubian Shield during agglutination of East and West Gondwana.  相似文献   

18.
唐哲民  陈方远 《岩石学报》2009,25(7):1639-1644
位于苏鲁超高压变质地体南部的中国大陆科学钻探工程（CCSD）主孔岩石经历了超高压变形及多期折返变形。第一期折返变形为伸展折返变形,榴辉岩发生角闪岩相退变质作用,没有新生面理或线理的发育,基本保留了超高压阶段的S-L组构,并有显示熔融体特征的强退变榴辉岩发育。第二期折返变形为SEE-NWW向挤压折返变形,超高压变形期形成的不同岩石类型在本期变形中表现出不同的叠加变形现象,榴辉岩类岩石早期形成的S倾面理主体部分转为SEE倾,但拉伸线理产状与超高压变形期的近SN走向基本一致,反映早期面理沿NNE轴向的重褶作用,局部又被向SEE缓倾的韧性剪切带切割;而片麻岩类岩石在超高压变形期形成的S-L组构的主体部分已被新生成的总体向SEE缓倾的S-L组构置换,反映早期面理不仅重褶,而且大部分再度发生韧性剪切变形,具SEE向NWW的逆冲剪切指向,矿物普遍重新定向。第三期折返变形发育具NWW向SEE正滑剪切指向的韧性剪切带,并伴随大量“Z”型褶皱构造的发育。第四期折返变形以NWW向SEE正滑的张性或张扭性脆性断裂活动为主。探讨了苏鲁超高压变质地体折返变形的力学机制及CCSD主孔岩石面理变化的形成机制。  相似文献   

19.
This integrated study on the pressure–temperature–deformation‐time record of the Goszów light quartzites from the Młynowiec–Stronie Group (Sudety Mts., SW Poland) provides new data that improve our understanding of the structure and geodynamic development of the Orlica–Śnieżnik Dome (OSD) as a Gondwana‐derived unit involved in the formation of the Variscan orogen. The structural and metamorphic record of the Goszów light quartzites, when compared to the under‐ and overlying rock formations, indicates that the whole Młynowiec–Stronie Group in the eastern part of the Saxothuringian terrane functioned as a single, integral lithotectonic unit with no visible structural or metamorphic discontinuities. The sequence of structures and thermodynamic modelling indicate that the light quartzites underwent the same polyphase tectonometamorphic evolution as the adjacent rocks belonging to the Młynowiec–Stronie Group. The development of tight, N–S‐trending folds and axial penetrative metamorphic foliation was related to metamorphic progression from 500 °C to 640 °C at 6–7 kbar. Subsequently, under the retrogressive conditions below 540 °C, the foliation was reactivated as a result of subsequent N–S‐directed ductile shearing and extension. Therefore, the study of the light quartzites exemplifies the penetrative structures in the OSD, and the metamorphic foliation and N–S‐trending lineation are composite structures. The monazite metamorphic ages of ca. 364 Ma and 335 Ma may be related to the approximately E–W‐ and N–S‐oriented tectonic movements, respectively, which occurred during the amalgamation of the Saxothuringian terrane with Brunovistulia. In contrast, the previously unknown early Palaeozoic monazite age of ca. 494 Ma is interpreted as the protolith age of the light quartzites. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

20.
大同－集宁地区太古代变质杂岩由葛胡窑灰色片麻岩系和丰镇群孔兹岩系两部分组成。根据普遍的构造交切关系及构造样式的有规律性变化，将大同－集宁地区太古代变质杂岩划分成４个构造变形序列，Ｄ－１变形仅仅在灰色片麻岩系中有发育，Ｄ＿（２－４）变形在两套岩系中均有发育，其中Ｄ＿（２－３）变形是区域性控制构造。同时对葛胡窑灰色片麻岩系和丰镇群孔兹岩系中褶皱的产状类型，褶皱的几何形态以及线理进行了系统的分析对比。两套岩系之间，在上述各方面的特征存在着系统的差异。反映了两套岩系具有不同的构造物理环境和变形演化历史。进一步证实了两套岩系之间存在着不整合接触关系。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号