首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
《Gondwana Research》2014,25(3-4):1051-1066
The Early Palaeozoic Ross–Delamerian orogenic belt is considered to have formed as an active margin facing the palaeo-Pacific Ocean with some island arc collisions, as in Tasmania (Australia) and Northern Victoria Land (Antarctica), followed by terminal deformation and cessation of active convergence. On the Cambrian eastern margin of Australia adjacent to the Delamerian Fold Belt, island arc and backarc basin crust was formed and is now preserved in the Lachlan Fold Belt and is consistent with a spatial link between the Delamerian and Lachlan orogens. The Delamerian–Lachlan connection is tested with new zircon data. Metamorphic zircons from a basic eclogite sample from the Franklin Metamorphic Complex in the Tyennan region of central Tasmania have rare earth element signatures showing that eclogite metamorphism occurred at ~ 510 Ma, consistent with island arc–passive margin collision during the Delamerian(− Tyennan) Orogeny. U–Pb ages of detrital zircons have been determined from two samples of Ordovician sandstones in the Lachlan Fold Belt at Melville Point (south coast of New South Wales) and the Howqua River (western Tabberabbera Zone of eastern Victoria). These rocks were chosen because they are the first major clastic influx at the base of the Ordovician ‘Bengal-fan’ scale turbidite pile. The samples show the same prominent peaks as previously found elsewhere (600–500 Ma Pacific-Gondwana and the 1300–1000 Ma Grenville–Gondwana signatures) reflecting supercontinent formation. We highlight the presence of ~ 500 Ma non-rounded, simple zircons indicating clastic input most likely from igneous rocks formed during the Delamerian and Ross Orogenies. We consider that the most probable source of the Ordovician turbidites was in East Antarctica adjacent to the Ross Orogen rather than reflecting long distance transport from the Transgondwanan Supermountain (i.e. East African Orogen). Together with other provenance indicators such as detrital mica ages, this is a confirmation of the Delamerian–Lachlan connection.  相似文献   

2.
Lower to upper Middle Ordovician quartz-rich turbidites form the bedrock of the Lachlan Orogen in the southern Tasmanides of eastern Australia and occupy a present-day deformed volume of ～2–3 million km3. We have used U–Pb and Hf-isotope analyses of detrital zircons in biostratigraphically constrained turbiditic sandstones from three separate terranes of the Lachlan Orogen to investigate possible source regions and to compare similarities and differences in zircon populations. Comparison with shallow-water Lower Ordovician sandstones deposited on the subsiding margin of the Gondwana craton suggests different source regions, with Grenvillian zircons in shelf sandstones derived from the Musgrave Province in central Australia, and Panafrican sources in shelf sandstones possibly locally derived. All Ordovician turbiditic sandstone samples in the Lachlan Orogen are dominated by ca 490–620 Ma (late Panafrican) and ca 950–1120 Ma (late Grenvillian) zircons that are sourced mainly from East Antarctica. Subtle differences between samples point to different sources. In particular, the age consistency of late Panafrican zircon data from the most inboard of our terranes (Castlemaine Group, Bendigo Terrane) suggests they may have emanated directly from late Grenvillian East Antarctic belts, such as in Dronning Maud Land and subglacial extensions that were reworked in the late Panafrican. Changes in zircon data in the more outboard Hermidale and Albury-Bega terranes are more consistent with derivation from the youngest of four sedimentary sequences of the Ross Orogen of Antarctica (Cambrian–Ordovician upper Byrd Group, Liv Group and correlatives referred to here as sequence 4) and/or from the same mixture of sources that supplied that sequence. These sources include uncommon ca 650 Ma rift volcanics, late Panafrican Ross arc volcanics, now largely eroded, and some <545 Ma Granite Harbour Intrusives, representing the roots of the Ross Orogen continental-margin arc. Unlike farther north, Granite Harbour Intrusives between the Queen Maud and Pensacola mountains of the southern Ross Orogen contain late Grenvillian zircon xenocrysts (derived from underlying relatively juvenile basement), as well as late Panafrican magmatic zircons, and are thus able to supply sequence 4 and the Lachlan Ordovician turbidites with both these populations. Other zircons and detrital muscovites in the Lachlan Ordovician turbidites were derived from relatively juvenile inland Antarctic sources external to the orogen (e.g. Dronning Maud Land, Sør Rondane and a possible extension of the Pinjarra Orogen) either directly or recycled through older sedimentary sequences 2 (Beardmore and Skelton groups) and 3 (e.g. Hannah Ridge Formation) in the Ross Orogen. Shallow-water, forearc basin sequence 4 sediments (or their sources) fed turbidity currents into outboard, deeper-water parts of the forearc basin and led to deposition of the Ordovician turbidites ～2500–3400 km to the north in backarc-basin settings of the Lachlan Orogen.  相似文献   

3.
40Ar/39Ar age data from the boundary between the Delamerian and Lachlan Fold Belts identify the Moornambool Metamorphic Complex as a Cambrian metamorphic belt in the western Stawell Zone of the Palaeozoic Tasmanide System of southeastern Australia. A reworked orogenic zone exists between the Lachlan and Delamerian Fold Belts that contains the eastern section of the Cambrian Delamerian Fold Belt and the western limit of orogenesis associated with the formation of an Ordovician to Silurian accretionary wedge (Lachlan Fold Belt). Delamerian thrusting is craton-verging and occurred at the same time as the final consolidation of Gondwana. 40Ar/39Ar age data indicate rapid cooling of the Moornambool Metamorphic Complex at about 500 Ma at a rate of 20 – 30°C per million years, temporally associated with calc-alkaline volcanism followed by clastic sedimentation. Extension in the overriding plate of a subduction zone is interpreted to have exhumed the metamorphic rocks within the Moornambool Metamorphic Complex. The Delamerian system varies from a high geothermal gradient with syntectonic plutonism in the west to lower geothermal gradients in the east (no syntectonic plutonism). This metamorphic zonation is consistent with a west-dipping subduction zone. Contrary to some previous models involving a reversal in subduction polarity, the Ross and Delamerian systems of Antarctica and Australia are inferred to reflect deformation processes associated with a Cambrian subduction zone that dipped towards the Gondwana supercontinent. Western Lachlan Fold Belt orogenesis occurred about 40 million years after the Delamerian Orogeny and deformed older, colder, and denser oceanic crust, with metamorphism indicative of a low geothermal gradient. This orogenesis closed a marginal ocean basin by west-directed underthrusting of oceanic crust that produced an accretionary wedge with west-dipping faults that verge away from the major craton. The western Lachlan Fold Belt was not associated with arc-related volcanism and plutonism occurred 40 – 60 million years after initial deformation. The revised orogenic boundaries have implications for the location of world-class 440 Ma orogenic gold deposits. The structural complexity of the 440 Ma Stawell gold deposit reflects its location in a reworked part of the Cambrian Delamerian Fold Belt, while the structurally simpler 440 Ma Bendigo deposit is hosted by younger Ordovician turbidites solely deformed by Lachlan orogenesis.  相似文献   

4.
The Melbourne Zone comprises Early Ordovician to Early Devonian marine turbidites, which pass conformably upward into a mid-Devonian fluviatile succession. There are four pulses of Silurian to mid-Devonian deep-marine sandstone-dominated sedimentation: Early Silurian (late Llandovery), Late Silurian (Ludlow), earliest Devonian (Lochkovian) and late Early Devonian (Emsian). Two dispersal patterns have been defined using more than 1100 palaeocurrent measurements, mainly from sole marks and cross-laminations in graded beds, together with sandstone compositions. The older pattern, of Silurian to earliest Devonian age, contains the lowest three sandstone pulses. Palaeocurrents and provenance define a wedge of southwesterly derived sediment, of largely cratonic provenance, thinning eastward. This older dispersal pattern is part of an Early Ordovician to earliest Devonian east-facing passive continental margin succession. Palaeocurrents and provenance in the Emsian sandstone pulse comprise three patterns: (1) west- to southwesterly directed palaeocurrents associated with fine- to coarse-grained, locally conglomeratic, lithic sandstones containing a high proportion of volcanic detritus; (2) east- to northeasterly directed palaeocurrents associated with fine- to medium-grained quartz-lithic sandstones; (3) north- to northwesterly and south- to southeasterly directed palaeocurrents associated with fine- to medium-grained sandstones of variable lithic composition. The palaeocurrent and provenance pattern defines a NNW-elongate basin with a tectonically active eastern margin, and is similar to the coeval Mathinna basin of northeastern Tasmania. Both basins are part of the same system of wrench basins, which developed along the western side of the Wagga–Omeo Metamorphic Belt during the earliest Devonian to Middle Devonian. The change in tectonic setting in the earliest Devonian appears to have occurred during an interval of significant dextral translation of the eastern Lachlan Fold Belt towards the SSE along the Governor and associated fault zones.  相似文献   

5.
In the Eastern Lachlan Orogen, the mineralised Molong and Junee‐Narromine Volcanic Belts are two structural belts that once formed part of the Ordovician Macquarie Arc, but are now separated by younger Silurian‐Devonian strata as well as by Ordovician quartz‐rich turbidites. Interpretation of deep seismic reflection and refraction data across and along these belts provides answers to some of the key questions in understanding the evolution of the Eastern Lachlan Orogen—the relationship between coeval Ordovician volcanics and quartz‐rich turbidites, and the relationship between separate belts of Ordovician volcanics and the intervening strata. In particular, the data provide evidence for major thrust juxtaposition of the arc rocks and Ordovician quartz‐rich turbidites, with Wagga Belt rocks thrust eastward over the arc rocks of the Junee‐Narromine Volcanic Belt, and the Adaminaby Group thrust north over arc rocks in the southern part of the Molong Volcanic Belt. The seismic data also provide evidence for regional contraction, especially for crustal‐scale deformation in the western part of the Junee‐Narromine Volcanic Belt. The data further suggest that this belt and the Ordovician quartz‐rich turbidites to the east (Kirribilli Formation) were together thrust over ?Cambrian‐Ordovician rocks of the Jindalee Group and associated rocks along west‐dipping inferred faults that belong to a set that characterises the middle crust of the Eastern Lachlan Orogen. The Macquarie Arc was subsequently rifted apart in the Silurian‐Devonian, with Ordovician volcanics preserved under the younger troughs and shelves (e.g. Hill End Trough). The Molong Volcanic Belt, in particular, was reworked by major down‐to‐the‐east normal faults that were thrust‐reactivated with younger‐on‐older geometries in the late Early ‐ Middle Devonian and again in the Carboniferous.  相似文献   

6.
The Hill End Trough of central‐western New South Wales was an elongate deep marine basin that existed in the Lachlan Fold Belt from the early Late Silurian to late Early Devonian. It is represented by a regionally extensive, unfossiliferous sequence of interbedded turbidites and hemipelagites of substantially silicic volcanic derivation, which passes laterally into contemporaneous shallow‐water sedimentary rocks. The Turondale and Merrions Formations of the Lower Devonian Crudine Group are two prominent volcanogenic formations in the predominantly sedimentary trough sequence. They contain a range of primary and resedimented volcanic facies suitable for U–Pb dating. These include widespread subaqueous silicic lavas and/or lava cryptodomes, and thick sequences of crystal‐rich volcaniclastic sandstone emplaced by a succession of mass‐flows that were generated by interaction between contemporaneous subaerial pyroclastic flows and the sea. Ion microprobe dating of the two volcanogenic formations by means of the commonly used SL 13 zircon standard yields ages ranging between 411.3 ± 5.1 and 404.8 ± 4.8 Ma. Normalising the data against a different zircon standard (QGNG) yields preferred slightly older mean ages that range between 413.4 ± 6.6 and 407.1 ± 6.9 Ma. These ages broadly approximate the Early Devonian age that has been historically associated with the Crudine Group. However, the biostratigraphically inferred late Lochkovian ‐ early Emsian (mid‐Early Devonian) age for the Merrions Formation is inconsistent with the current Australian Phanerozoic Timescale, which assigns an age of 410 Ma to the Silurian‐Devonian boundary, and ages of 404.5 Ma and 395.5 Ma to the base and top of the Pragian, respectively. There is, however, good agreement if the new ages are compared with the most recently published revision of the Devonian time‐scale. This suggests that the Early Devonian stage boundaries of the Australian Phanerozoic Timescale need to be revised downward. The new ages for the Merrions Formation could also provide a time point on this time‐scale for the Pragian to early Emsian, for which no data are presently available.  相似文献   

7.
Final Gondwana amalgamation was marked by the closure of the Neoproterozoic Clymene ocean between the Amazonia craton and central Gondwana. The events which occurred in the last stage of this closure were recorded in the upper Alto Paraguai Group in the foreland of the Paraguay orogen. Outcrop-based facies analysis of the siliciclastic rocks of upper Alto Paraguai Group, composed of the Sepotuba and Diamantino Formations, was carried out in the Diamantino region, within the eastern part of the Barra dos Bugres basin, Mato Grosso state, central-western Brazil. The Sepotuba Formation is composed of sandy shales with planar to wave lamination interbedded with fine-grained sandstone with climbing ripple cross-lamination, planar lamination, swaley cross-stratification and tangential to sigmoidal cross-bedding with mud drapes, related to marine offshore deposits. The lower Diamantino Formation is composed of a monotonous, laterally continuous for hundreds of metres, interbedded siltstone and fine-grained sandstone succession with regular parallel lamination, climbing ripple cross-lamination and ripple-bedding interpreted as distal turbidites. The upper part of this formation consists of fine to medium-grained sandstones with sigmoidal cross-bedding, planar lamination, climbing ripple cross-lamination, symmetrical to asymmetrical and linguoid ripple marks arranged in lobate sand bodies. These facies are interbedded with thick siltstone in coarsening upward large-scale cycles related to a delta system. The Sepotuba Formation characterises the last transgressive deposits of the Paraguay basin representing the final stage of a marine incursion of the Clymene ocean. The progression of orogenesis in the hinterland resulted in the confinement of the Sepotuba sea as a foredeep sub-basin against the edge of the Amazon craton. Turbidites were generated during the deepening of the basin. The successive filling of the basin was associated with progradation of deltaic lobes from the southeast, in a wide lake or a restricted sea that formed after 541 ± 7 Ma. Southeastern to east dominant Neoproterozoic source regions were confirmed by zircon grains that yielded ages around 600 to 540 Ma, that are interpreted to be from granites in the Paraguay orogen. This overall regressive succession recorded in the Alto Paraguai Group represents the filling up of a foredeep basin after the final amalgamation of western Gondwana in the earliest Phanerozoic.  相似文献   

8.
One of the most significant, but poorly understood, tectonic events in the east Lachlan Fold Belt is that which caused the shift from mafic, mantle‐derived calc‐alkaline/shoshonitic volcanism in the Late Ordovician to silicic (S‐type) plutonism and volcanism in the late Early Silurian. We suggest that this chemical/isotopic shift required major changes in crustal architecture, but not tectonic setting, and simply involved ongoing subduction‐related magmatism following burial of the pre‐existing, active intraoceanic arc by overthrusting Ordovician sediments during Late Ordovician — Early Silurian (pre‐Benambran) deformation, associated with regional northeast‐southwest shortening. A review of ‘type’ Benambran deformation from the type area (central Lachlan Fold Belt) shows that it is constrained to a north‐northwest‐trending belt at ca 430 Ma (late Early Silurian), associated with high‐grade metamorphism and S‐type granite generation. Similar features were associated with ca 430 Ma deformation in east Lachlan Fold Belt, highlighted by the Cooma Complex, and formed within a separate north‐trending belt that included the S‐type Kosciuszko, Murrumbidgee, Young and Wyangala Batholiths. As Ordovician turbidites were partially melted at ca 430 Ma, they must have been buried already to ～20 km before the ‘type’ Benambran deformation. We suggest that this burial occurred during earlier northeast‐southwest shortening associated with regional oblique folds and thrusts, loosely referred to previously as latitudinal or east‐west structures. This event also caused the earliest Silurian uplift in the central Lachlan Fold Belt (Benambran highlands), which pre‐dated the ‘type’ Benambran deformation and is constrained as latest Ordovician — earliest Silurian (ca 450–440 Ma) in age. The south‐ to southwest‐verging, earliest Silurian folds and thrusts in the Tabberabbera Zone are considered to be associated with these early oblique structures, although similar deformation in that zone probably continued into the Devonian. We term these ‘pre’‐ and ‘type’‐Benambran events as ‘early’ and ‘late’ for historical reasons, although we do not consider that they are necessarily related. Heat‐flow modelling suggests that burial of ‘average’ Ordovician turbidites during early Benambran deformation at 450–440 Ma, to form a 30 km‐thick crustal pile, cannot provide sufficient heat to induce mid‐crustal melting at ca 430 Ma by internal heat generation alone. An external, mantle heat source is required, best illustrated by the mafic ca 430 Ma, Micalong Swamp Igneous Complex in the S‐type Young Batholith. Modern heat‐flow constraints also indicate that the lower crust cannot be felsic and, along with petrological evidence, appears to preclude older continental ‘basement terranes’ as sources for the S‐type granites. Restriction of the S‐type batholiths into two discrete, oblique, linear belts in the central and east Lachlan Fold Belt supports a model of separate magmatic arc/subduction zone complexes, consistent with the existence of adjacent, structurally imbricated turbidite zones with opposite tectonic vergence, inferred by other workers to be independent accretionary prisms. Arc magmas associated with this ‘double convergent’ subduction system in the east Lachlan Fold Belt were heavily contaminated by Ordovician sediment, recently buried during the early Benambran deformation, causing the shift from mafic to silicic (S‐type) magmatism. In contrast, the central Lachlan Fold Belt magmatic arc, represented by the Wagga‐Omeo Zone, only began in the Early Silurian in response to subduction associated with the early Benambran northeast‐southwest shortening. The model requires that the S‐type and subsequent I‐type (Late Silurian — Devonian) granites of the Lachlan Fold Belt were associated with ongoing, subduction‐related tectonic activity.  相似文献   

9.

Detrital zircons from 13 Late Mesoproterozoic to Early Neoproterozoic sandstones and two Palaeozoic sandstones from Tasmania were dated in order to improve constraints on depositional ages, to test correlation between Proterozoic inliers, and to characterise source regions. These include successions considered to be the oldest presently exposed in Tasmania. Typical features of the age distributions of the Proterozoic rocks are prominent data concentrations at 1800–1650 Ma and 1450–1400 Ma, and a minor spread of Archaean ages. Statistical testing of the similarity of the age profiles shows that widespread quartzarenaceous samples from the Detention Subgroup, Needles Quartzite and from the Tyennan region are strongly similar, consistent with broad correlation. Relatively large differences are seen between the Detention Subgroup and the conformable, stratigraphically higher Jacob Quartzite, which contains an additional spread of 1300–1000 Ma zircons suggestive of a Grenvillian source. Age profiles of the quartzarenites and quartzwacke turbidites (Oonah Formation and correlatives) cannot be readily differentiated. The Oonah Formation likewise includes samples with and without Grenvillian ages, and there is no 750 Ma zircon population that would be expected if the turbidites were genetically related to the Wickham Orogeny. The simplest interpretation is that the quartzarenites (Rocky Cape Group and correlatives) and the turbidites (Oonah Formation and correlates) are lateral equivalents, although a younger (post-Wickham Orogeny) age for the Oonah Formation cannot be discounted. A maximum age of ca 1000 Ma is inferred for the Oonah Formation, Rocky Cape Group and correlatives. A minimum age of ca 750 Ma is provided by the basal age of the overlying Togari Group and correlatives. In a metasediment from western King Island, the youngest detrital zircons are ca 1350 Ma, allowing a pre-Grenvillian depositional age as suggested by previous dating of metamorphic monazite. However, the age profile of this sample is not dissimilar to the other Tasmanian successions that are inferred to be 1000–750 Ma. The Wings Sandstone, of southern Tasmania, contains an unusual profile dominated by Grenvillian ages, consistent with an allochthonous origin. Basement ages that broadly match the age spectra of the Tasmanian Proterozoic sediments are found in southwestern Laurentia, consistent with mutual proximity in Rodinia reconstructions. The Palaeozoic sandstones, from the turbiditic Mathinna Supergroup of northeastern Tasmania, have zircon age profiles typical of the Lachlan Fold Belt, with a predominant latest Neoproterozoic-Early Cambrian component and a lesser, broad Proterozoic data concentration at ca 1000 Ma. Western Tasmania was not a significant part of the source area for these rocks.  相似文献   

10.
In the Shoalhaven River Gorge, in the eastern Lachlan Fold Belt, the Ordovician quartz‐turbidite succession (Adaminaby Group) is affected by one major phase of deformation with northerly trending, gently plunging, upright, close to tight folds (F1) characterised by a range in half wavelengths up to 3 km. Several anticlinoria and synclinoria are developed and folds occur in at least four orders; these characteristics are consistent with buckling occurring at several scales and are controlled by the thickness of competent units in the multilayered succession. F1 folding is thick‐skinned in style with the whole crust probably having been affected by deformation. D1 occurred during the Silurian to Middle Devonian interval and was associated with crustal thickening and the shallowing of depositional environments over time. Locally, F1 is overprinted by south‐southeast‐trending, steeply to moderately inclined F2 that reorients F1 to recumbent attitudes. D2 is of Early to Middle Carboniferous age. Both deformations are related to convergence in an intra‐arc to backarc region and occurred inboard of a subduction zone, remnants of which occur in the New England Fold Belt.  相似文献   

11.
Critical assessment of Paleozoic paleomagnetic results from Australia shows that paleopoles from locations on the main craton and in the various terranes of the Tasman Fold Belt of eastern Australia follow the same path since 400 Ma for the Lachlan and Thomson superterranes, but not until 250 Ma or younger for the New England superterrane. Most of the paleopoles from the Tasman Fold Belt are derived from the Lolworth-Ravenswood terrane of the Thomson superterrane and the Molong-Monaro terrane of the Lachlan superterrane. Consideration of the paleomagnetic data and geological constraints suggests that these terranes were amalgamated with cratonic Australia by the late Early Devonian. The Lolworth-Ravenswood terrane is interpreted to have undergone a 90° clockwise rotation between 425 and 380 Ma. Although the Tamworth terrane of the western New England superterrane is thought to have amalgamated with the Lachlan superterrane by the Late Carboniferous, geological syntheses suggest that movements between these regions may have persisted until the Middle Triassic. This view is supported by the available paleomagnetic data. With these constraints, an apparent polar wander path for Gondwana during the Paleozoic has been constructed after review of the Gondwana paleomagnetic data. The drift history of Gondwana with respect to Laurentia and Baltica during the Paleozoic is shown in a series of paleogeographic maps.  相似文献   

12.

In its type area around Narooma, the Narooma Terrane in the Lachlan Orogen comprises the Wagonga Group, which consists of the Narooma Chert overlain by the argillaceous Bogolo Formation. Conodonts indicate that the lower, largely massive (ribbon chert) part of the Narooma Chert ranges in age from mid-Late Cambrian to Darriwilian-Gisbornian (late Middle to early Late Ordovician). The upper Narooma Chert consists of shale, containing Eastonian (Late Ordovician) graptolites, interbedded with chert. Where not deformed by later faulting, the boundary between the Narooma Chert and Bogolo Formation is gradational. At map scale, the Narooma Terrane consists of a stack of imbricate thrust slices caught between two thrust faults that juxtaposed the terrane against the coeval Adaminaby Superterrane in Early Silurian time. These slices are best defined where Narooma Chert is thrust over Bogolo Formation. The soles of such slices contain multiply foliated chert. Late extensional shear bands indicate a strike-slip component to the faulting. The Narooma Terrane, with chert overlain by muddy ooze, is interpreted to be an oceanic terrane that accumulated remote from land for ～50 million years. The upward increase in the terrigenous component at the top of the Wagonga Group (shale, argillite, siltstone and sandstone of the upper Narooma Chert and Bogolo Formation) records approach of the terrane to the Australian sector of the Gondwana margin. Blocks of chert, argillite and sandstone reflect extensional/strike-slip disruption of the terrane as it approached the transform trench along the Gondwana-proto-Pacific plate boundary. Blocks of basalt and basalt breccia represent detritus from a seamount that was also entering the trench. There is no evidence that the Narooma Terrane or the adjacent Adaminaby Group formed in an accretionary prism/ subduction complex.  相似文献   

13.
ABSTRACT The Upper Carboniferous deep‐water rocks of the Shannon Group were deposited in the extensional Shannon Basin of County Clare in western Ireland and are superbly exposed in sea cliffs along the Shannon estuary. Carboniferous limestone floors the basin, and the basin‐fill succession begins with the deep‐water Clare Shales. These shales are overlain by various turbidite facies of the Ross Formation (460 m thick). The type of turbidite system, scale of turbidite sandstone bodies and the overall character of the stratigraphic succession make the Ross Formation well suited as an analogue for sand‐rich turbidite plays in passive margin basins around the world. The lower 170 m of the Ross Formation contains tabular turbidites with no channels, with an overall tendency to become sandier upwards, although there are no small‐scale thickening‐ or thinning‐upward successions. The upper 290 m of the Ross Formation consists of turbidites, commonly arranged in thickening‐upward packages, and amalgamated turbidites that form channel fills that are individually up to 10 m thick. A few of the upper Ross channels have an initial lateral accretion phase with interbedded sandstone and mudstone deposits and a subsequent vertical aggradation phase with thick‐bedded amalgamated turbidites. This paper proposes that, as the channels filled, more and more turbidites spilled further and further overbank. Superb outcrops show that thickening‐upward packages developed when channels initially spilled muds and thin‐bedded turbidites up to 1 km overbank, followed by thick‐bedded amalgamated turbidites that spilled close to the channel margins. The palaeocurrent directions associated with the amalgamated channel fills suggest a low channel sinuosity. Stacks of channels and spillover packages 25–40 m thick may show significant palaeocurrent variability at the same stratigraphic interval but at different locations. This suggests that individual channels and spillover packages were stacked into channel‐spillover belts, and that the belts also followed a sinuous pattern. Reservoir elements of the Ross system include tabular turbidites, channel‐fill deposits, thickening‐upward packages that formed as spillover lobes and, on a larger scale, sinuous channel belts 2·5–5 km wide. The edges of the belts can be roughly defined where well‐packaged spillover deposits pass laterally into muddier, poorly packaged tabular turbidites. The low‐sinuosity channel belts are interpreted to pass downstream into unchannellized tabular turbidites, equivalent to lower Ross Formation facies.  相似文献   

14.
Stacked shallow marine cycles in the Lower Ordovician, Bell Island Group, of Bell Island, Newfoundland, show upward thickening and upward coarsening sequences which were deposited on a storm-affected shelf. In the Beach Formation each cycle has a facies sequence comprised, from base to top, of dark grey mudstones, light grey mudstones, tabular sandstones and mudstones, lenticular sandstones and mudstones, and thick bedded lenticular sandstones, reflecting a progressive increase of wave orbital velocities at the sediment surface. The mudstones and tabular sandstones reflect an environment in which the sea floor lay in the lower part of the wave orbital velocity field and in which tempestites were deposited as widespread sheets from weak combined flow currents. The lenticular sandstones in the succeeding facies are wave reworked sands, commonly lying in erosional hollows and having erosional tops and internal hummocky cross-stratification. Planar lamination is relatively uncommon and sole marks are mainly absent. In this facies oscillatory currents were dominant and accumulated sand in patches generally 10–30 m in diameter. The facies formed on the inner shelf where the oscillatory currents generated by storm waves had powerful erosional effects and also determined the depositional bedforms. Mud partings and second-order set boundaries within sandstone beds are believed to separate the products of individual storms so that many lenticular sandstone beds represent the amalgamation of several event beds. This interpretation has important implications for attempts to estimate event frequency by counting sandstone beds within a sequence and for estimates of sand budgets during storm events. The thick bedded lenticular facies appears to have been formed by erosion of the mud beds between the lenticular sands, leading to nearly complete amalgamation of several lenticular sand bodies except for residual mud partings. In the overlying Redmans Formation the process of amalgamation progressed even further so that nearly all the mud partings were removed, resulting in the formation of thick bedded tabular sandstones. Sequence stratigraphic analysis of the cyclical sequence suggests that the cycles were eustatically controlled. The rising limb of the sea level curve produced only the dark grey mudstone part of the cycle while the remainder of the cycle was deposited on the falling limb. There is a gradational but rapid facies transition from the tabular to the lenticular sandstone facies which is interpreted as occurring at the inflexion point on the falling limb. The thick bedded facies of the Beach Formation and the thick bedded tabular facies of the Redmans Formation represent periods of maximum sea level fall. The stacked cycles in the Beach Formation are interpreted as an aggradational, high frequency sequence or parasequence set bounded at the top by a sequence boundary and succeeded by the three aggradational parasequences of the Redmans Formation. The recognition of storm facies with sandstone beds of very different bed length has important implications for the reservoir modelling of such facies.  相似文献   

15.
晚石炭世末期-三叠纪东澳大利亚的鲍恩-冈尼达-悉尼（Bowen- Gunnedah-Sydney）盆地系是位于拉克伦（Lachlan）褶皱带和新英格兰（New England）褶皱带之间的一个长条形的构造盆地。从北部的冈尼达（Gunnedah）到南部的巴特曼斯（Batemans）湾，悉尼盆地是鲍恩-冈尼达-悉尼盆地系南端的一个次级盆地。悉尼盆地的二叠系包括河流、三角洲、滨浅海沉积岩和火山岩地层。南悉尼盆地的西南部二叠系不整合覆盖于变形变质的拉克伦（Lachlan）褶皱带之上。二叠系由下部的塔拉特郎（Tallaterang）群、中部的肖尔黑文群（Shoalhaven Group）和上部的伊勒瓦拉煤系（Illawarra Coal Measures）组成。从晚石炭世末到中三叠世悉尼盆地经历了弧后扩张到典型的前陆盆地的不同阶段：弧后扩张阶段、被动热沉降阶段和挤压挠曲负载阶段。  相似文献   

16.
Eight dredges from the southern New South Wales continental slope sampled the offshore extension of the Lachlan Orogen. Two rock suites were recovered: (1) lower greenshist facies limestones, felsic volcanics, sandstones, mudstones and Moruya Suite granodiorite correlate with the onshore Silurian to mid-Devonian orogenic phase; and (2) a strongly deformed greenschist to lower amphibolite facies mafic volcanics, cherts, marbles, pelites and serpentinites correlate in part with the Cambro-Ordovician Wagonga Group of the Narooma Terrane. The mafic volcanic rocks have ocean island, tholeiitic and boninitic basalt affinities. The offshore distribution of ocean island basalt that correlates with medial Cambrian basalt breccias at Batemans Bay suggests a large seamount or seamount complex. The boninites, tholeiites and ultramafics could be part of a forearc-generated ophiolite. The Narooma Terrane basement is interpreted as the part of the bonititic arc postulated to have collided with Vandieland in late early Cambrian time. Mid-Cambrian rifting of the oceanward part of this arc remnant, generated the Albury–Bega Terrane oceanic basement exposed in the Howqua Valley in the west and Melville Point in the east. Overlying are upper–mid-Cambrian to lowermost Ordovician black shale and chert, Lower Ordovician to Gisbornian Adaminaby Group quartz turbidites and Gisbornian to lower Bolindian Bendoc Group black shales. Batemans Bay exposures are reinterpreted as a dismembered basin margin succession onlapping the west-facing attenuated flank of the Narooma Terrane. The Narooma Cambro-Ordovician cherts and mudstones were initially deposited outboard on the more elevated seamount flank elevated above the clastic-filled basin to the west. Benambran deformation commenced in latest Ordovician time uplifting the outer Narooma Terrane, shedding debris from the seamount and its flanks, culminating in allochthonous displacement of chert masses to the basin's eastern margin to Narooma, and emplacing them as a succession of thrust sheets. Contemporaneously, silt and mud of the Bogolo Formation, deposited from the west, were mixed with olistostomal basalt and chert debris from the east. Early Silurian westward tectonic transport of the Narooma Terrane ruptured the Albury-Bega basin floor at Batemans Bay, thrusting it and its sedimentary cover over its eastern margin as a series of thrusts each floored by melange (mapped Bogolo Formation), derived from the slope debris and its overpressured sedimentary cover. Offshore, the metamorphosed Benambran phase rocks are unconformably overlain by Tabberabberan cycle sediments and volcanics intruded by granodiorite. Our interpretation of the boundary between the Albury-Bega and Narooma terranes as a thrusted passive margin accumulation is incompatible with models of a Narooma Accretionary Complex formed by the subduction of the Paleopacific Plate.  相似文献   

17.
40Ar/39Ar data for muscovite separates and hydrothermally altered whole‐rock samples from the Ballarat West and the Ballarat East goldfields indicate that mesothermal gold mineralisation at Ballarat occurred during several episodic pulses, ranging in age from the Late Ordovician to the Early Devonian. Initial formation of auriferous structures in the Ballarat goldfields coincided with folding and thrusting associated with the development of the western Lachlan Fold Belt between 460 and 440 Ma. Subsequent fault reactivation and magmatism resulted in remobilisation and additional mineralisation between 410 and 380 Ma, and around 370 Ma. The results presented herein are in agreement with findings for other major gold deposits in central Victoria and further constrain the history of deformation, metamorphism and mineralisation in the western subprovince of the Lachlan Fold Belt.  相似文献   

18.
In the Lachlan Fold Belt of southeastern Australia, major orogenic gold and porphyry gold–copper deposits formed simultaneously within distinct tectonic settings during a very short time interval at ca. 440 Ma. The driving mechanism that controlled the temporal coincidence of these deposits remains largely unexplained. A review of contemporaneous metallogenic, tectonic, magmatic and sedimentological events in central and eastern Australia reveals that a change in subduction dynamics along the Australian sector of the Early Palaeozoic circum–Gondwana mega-subduction system could have influenced lithospheric stress conditions far inboard of the subduction margin. The magnitude of ore formation and the spatial extent of related events are proposed in this paper to have been controlled by the interplay of mantle processes and lithospheric changes that followed slab break-off along a portion of the mega-subduction system surrounding Gondwana at that time. Slab break-off after subduction lock-up caused mantle upwelling that, in turn, provided an instantaneous heat supply for magmatic and hydrothermal events. Coincident reorganisation of lithospheric stress conditions far inboard of the proto-Pacific margin of Australia controlled reactivation of deep-lithospheric fault structures. These fault systems provided a pathway for fluids and heat fuelled by mantle upwelling into the upper lithosphere and caused the deposition of ~440 Ma gold deposits in the Lachlan Fold Belt, as well as a range of metallogenic, tectonic and sedimentary changes elsewhere in central and eastern Australia.  相似文献   

19.
The northwestern corner of New South Wales consists of the paratectonic Late Proterozoic to Early Cambrian Adelaide Fold Belt and older rocks, which represent basement inliers in this fold belt. The rest of the state is built by the composite Late Proterozoic to Triassic Tasman Fold Belt System or Tasmanides.In New South Wales the Tasman Fold Belt System includes three fold belts: (1) the Late Proterozoic to Early Palaeozoic Kanmantoo Fold Belt; (2) the Early to Middle Palaeozoic Lachlan Fold Belt; and (3) the Early Palaeozoic to Triassic New England Fold Belt. The Late Palaeozoic to Triassic Sydney—Bowen Basin represents the foredeep of the New England Fold Belt.The Tasmanides developed in an active plate margin setting through the interaction of East Gondwanaland with the Ur-(Precambrian) and Palaeo-Pacific plates. The Tasmanides are characterized by a polyphase terrane accretion history: during the Late Proterozoic to Triassic the Tasmanides experienced three major episodes of terrane dispersal (Late Proterozoic—Cambrian, Silurian—Devonian, and Late Carboniferous—Permian) and six terrane accretionary events (Cambrian—Ordovician, Late Ordovician—Early Silurian, Middle Devonian, Carboniferous, Middle-Late Permian, and Triassic). The individual fold belts resulted from one or more accretionary events.The Kanmantoo Fold Belt has a very restricted range of mineralization and is characterized by stratabound copper deposits, whereas the Lachlan and New England Fold Belts have a great variety of metallogenic environments associated with both accretionary and dispersive tectonic episodes.The earliest deposits in the Lachlan Fold Belt are stratabound Cu and Mn deposits of Cambro-Ordovician age. In the Ordovician Cu deposits were formed in a volcanic are. In the Silurian porphyry Cu---Au deposits were formed during the late stages of development of the same volcanic are. Post-accretionary porphyry Cu---Au deposits were emplaced in the Early Devonian on the sites of the accreted volcanic arc. In the Middle to Late Silurian and Early Devonian a large number of base metal deposits originated as a result of rifting and felsic volcanism. In the Silurian and Early Devonian numerous Sn---W, Mo and base metal—Au granitoid related deposits were formed. A younger group of Mo---W and Sn deposits resulted from Early—Middle Carboniferous granitic plutonism in the eastern part of the Lachlan Fold Belt. In the Middle Devonian epithermal Au was associated with rifting and bimodal volcanism in the extreme eastern part of the Lachlan Fold Belt.In the New England Fold Belt pre-accretionary deposits comprise stratabound Cu and Mn deposits (pre-Early Devonian): stratabound Cu and Mn and ?exhalite Au deposits (Late Devonian to Early Carboniferous); and stratabound Cu, exhalite Au, and quartz—magnetite (?Late Carboniferous). S-type magmatism in the Late Carboniferous—Early Permian was responsible for vein Sn and possibly Au---As---Ag---Sb deposits. Volcanogenic base metals, when compared with the Lachlan Fold Belt, are only poorly represented, and were formed in the Early Permian. The metallogenesis of the New England Fold Belt is dominated by granitoid-related mineralization of Middle Permian to Triassic age, including Sn---W, Mo---W, and Au---Ag---As Sb deposits. Also in the Middle Permian epithermal Au---Ag mineralization was developed. During the above period of post-orogenic magmatism sizeable metahydrothermal Sb---Au(---W) and Au deposits were emplaced in major fracture and shear zones in central and eastern New England. The occurrence of antimony provides an additional distinguishing factor between the New England and Lachlan Fold Belts. In the New England Fold Belt antimony deposits are abundant whereas they are rare in the Lachlan Fold Belt. This may suggest fundamental crustal differences.  相似文献   

20.
The Itajaí Basin located in the southern border of the Luís Alves Microplate is considered as a peripheral foreland basin related to the Dom Feliciano Belt. It presents an excellent record of the Ediacaran period, and its upper parts display the best Brazilian example of Precambrian turbiditic deposits. The basal succession of Itajaí Group is represented by sandstones and conglomerates (Baú Formation) deposited in alluvial and deltaic-fan systems. The marine upper sequences correspond to the Ribeir?o Carvalho (channelized and non-channelized proximal silty-argillaceous rhythmic turbidites), Ribeir?o Neisse (arkosic sandstones and siltites), and Ribeir?o do Bode (distal silty turbidites) formations. The Apiúna Formation felsic volcanic rocks crosscut the sedimentary succession. The Cambrian Subida leucosyenogranite represents the last felsic magmatic activity to affect the Itajaí Basin. The Brusque Group and the Florianópolis Batholith are proposed as source areas for the sediments of the upper sequence. For the lower continental units the source areas are the Santa Catarina, S?o Miguel and Camboriú complexes. The lack of any oceanic crust in the Itajaí Basin suggests that the marine units were deposited in a restricted, internal sea. The sedimentation started around 600?Ma and ended before 560?Ma as indicated by the emplacement of rhyolitic domes. The Itajaí Basin is temporally and tectonically correlated with the Camaqu? Basin in Rio Grande do Sul and the Arroyo del Soldado/Piriápolis Basin in Uruguay. It also has several tectono-sedimentary characteristics in common with the African-equivalent Nama Basin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号