共查询到20条相似文献，搜索用时 812 毫秒
1.
《Journal of Structural Geology》2003,25(10):1659-1673
Detachment folds represent a major structural element in a number of fold belts. They are common in the Jura Mountains, the Zagros fold belt, the Central Appalachian fold belt, the Wyoming fold-belt, the Brooks Range, the Parry Islands fold belt, and parts of the SubAndean belt. These structures form in stratigraphic packages with high competency contrasts among units. The competent upper units exhibit parallel fold geometries, whereas the weak lower unit displays disharmonic folding and significant penetrative deformation. Two distinct geometric types, disharmonic detachment folds, and lift-off folds have been recognized. However, these structures commonly represent different stages in the progressive evolution of detachment folds. The structures first form by symmetric or asymmetric folding, with the fold wavelength controlled by the thickness of the dominant units. Volumetric constraints require sinking of units in the synclines, and movement of the ductile unit from the synclines to the anticlines. Continuing deformation results in increasing fold amplitudes and tighter geometries resulting from both limb segment rotation and hinge migration. Initially, limb rotation occurs primarily by flexural slip folding, but in the late stages of deformation, the rotation may involve significant internal deformation of units between locked hinges. The folds eventually assume tight isoclinal geometries resembling lift-off folds. Variations in the geometry of detachment fold geometry, such as fold asymmetry, significant faulting, and fold associated with multiple detachments, are related to variations in the mechanical stratigraphy and pre-existing structure. 相似文献
2.
早中生代(晚印支-早燕山期)岳阳-赤壁断褶带位于江南造山带与中扬子前陆盆地交界地带.作者对该构造带进行了地表地质调查,以此为基础探讨了构造剖面结构及构造变形动力机制.岳阳-赤壁断褶带自南而北可分为岳阳-临湘基底滑脱-逆冲带,桃花泉-肖家湾盖层滑脱褶皱带,以及赤壁-嘉鱼前陆盆地断-褶-盆构造带.岳阳-临湘基底滑脱-逆冲带自南而北依次有郭镇向斜、官山背斜、临湘倒转向斜和聂市背斜,组成隔槽式褶皱组合.褶皱轴面多向南倾,褶皱变形面为南华系盖层与冷家溪群褶皱基底间的角度不整合面和顺界面的滑脱断裂面.桃花泉-肖家湾盖层滑脱褶皱带主要发育轴面南倾倒转褶皱,褶皱波长较小,卷入地层为南华系-志留系以及上石炭统-中三叠统沉积盖层.赤壁-嘉鱼前陆盆地断-褶-盆构造带以南倾蒲圻断裂(江南断裂)为南部边界,发育T3-J2前陆盆地沉积,带内褶皱与断裂卷入地层包括沉积盖层以及T3-J2地层:南部断裂与褶皱轴面南倾.北部轴面近直立.自南西至北东,研究区内构造线走向由EW向渐变为NEE-NE向.上述构造分带及变形特征反映出自南向北的运动指向,表明岳阳-赤壁断褶带具前陆冲断带构造性质.从断裂相关褶皱理论出发,以地表构造特征为依据,厘定了岳阳-赤壁地质剖面结构并进行了变形动力机制分析,认识如下:①自南而北、自下而上的多个滑脱层及其间的南倾逆断裂或断坡(主要为江南断裂)组成近似台阶状的逆冲断裂系统,从总体上控制了构造块体的滑移、逆冲以及相应的构造格架或变形分区.②郭镇向斜为基底滑脱褶皱,官山背斜具滑脱褶皱和断裂传播褶皱双重成因,聂市背斜为断裂转折褶皱;临湘向斜为受两侧背斜控制的被动向斜,由于弯滑褶皱作用在其两翼沿不整合界面形成滑脱断裂.③岳阳-临湘基底滑脱-逆冲带隔槽式褶皱的形成主要受控于褶皱基底的滑脱和基底整体的水平压缩,其形成机制类似于肿缩式褶皱.最后讨论认为湘东北-鄂东南地区不存在大规模、长距离的逆冲推覆构造. 相似文献
3.
庐山变质核杂岩具有典型的3层结构。拆离带是核部隆升过程中盖层滑脱、剪切变形而形成的,该拆离面是在北东向褶皱基础上叠加杂岩核部隆升作用而形成的波状起伏面。拆离带在核部以西发育倾向西向、南西向、北西向的面理和矿物生长线理,显示向西滑脱形成剪切拉伸变形的特征。拆离带岩石以糜棱岩和构造片岩为主,辅以碎裂岩和构造角砾岩。岩石变形特征表明其既具有韧性变形,也具有脆-韧性变形及脆性变形的特点。核部隆升引起的拆离变形作用,不仅形成了拆离带,还影响了拆离带以上盖层岩石,形成一个由拆离带向上由强变弱的变形域。这种规律性递变现象使庐山变质核杂岩具有垂向变形分层、水平变形分带的特点。拆离带中角闪石-斜长石矿物对计算得出的变质温度为653 ℃～694 ℃,压力为0.56～0.67 GPa。 相似文献
4.
孟加拉湾若开褶皱带晚新生代构造特征初步研究 总被引：2，自引：0，他引：2
孟加拉湾若开褶皱带位于印度-缅甸山脉西部山前,由NNW—SSE向带状分布的多排背斜构成,其构造特征研究仍然十分薄弱。本文通过钻井资料和二维地震反射剖面精细构造解析,尝试分析若开褶皱带晚新生代构造特征,重点关注若开褶皱带的滑脱层发育特征及背斜几何学及运动学特征,结果表明若开褶皱带发育多个滑脱层:①底部滑脱层,位于约6.5s(双程走时)处;②中部滑脱层,层位存在变化,可能位于第四系底部或上中新统下方约2.5s处。在区域挤压作用下,若开褶皱带发育与底部滑脱层和中部滑脱层相关的滑脱褶皱,构造变形主要受控于底部滑脱层,而中部滑脱层影响了局部构造变形。生长地层记录显示若开褶皱带构造变形自东往西迁移,变形前缘形成于第四纪。基于构造分析结果提出了若开褶皱带褶皱变形的两种运动学端元模型:模型1中不发育中部滑脱层,滑脱褶皱发育于底部滑脱层之上;模型2中发育中部滑脱层,滑脱褶皱发育于中部滑脱层和底部滑脱层之上,形成上、下两套构造层。若开褶皱带背斜几何学和运动学特征受下伏滑脱层控制,背斜在走向上叠置、分叉可能暗示着背斜下伏滑脱层在走向上发生了改变。流体超压可能是影响若开褶皱带构造变形的重要控制因素。 相似文献
5.
Ehsan BARZGAR Iraj ABDOLLAHIE FARD Rasoul HAMIDZADEH MOGHADAM Emadoddin ABDOLLAHIE KHALILI Aboozar GARAVAND 《《地质学报》英文版》2015,89(1):105-120
A structural cross-section constructed across the Zagros Fold-Thrust Belt covering the Abadan Plain, Dezful Embayment, and Izeh Zone applied 2D and 3D seismic data, well data, surface and subsurface geological maps, satellite images and field reconnaissance. Besides validation and modification of the cross-section, restoration allows better understanding of the geology, structural style and stratigraphy of the Zagros basin. In the area of interest, the Hormuz basal decollement and the Gachsaran detachment play the most significant roles in the structural style and deformation of the Zagros belt. More complexity is associated with interval decollements such as Triassic evaporites, Albian shales and Eocene marls. A variety of lithotectonic units and detachment surfaces confound any estimation of shortening, which generally decreases with increasing depth. Deformation completely differs in the Abadan Plain, Dezful Embayment and Izeh Zone because of different sedimentation histories and tectonic evolution; gentle and young structures can be interpreted as pre-collisional structures of the Dezful Embayment before the Late Cretaceous. After the Late Cretaceous, the Mountain Front Fault is the main control of sedimentation and deformation in the Zagros Basin, and this completely characterizes fold style and geometry within the Dezful Embayment and the Izeh Zone. 相似文献
6.
Mohamed Sadok Bensalem Mohamed Hedi Bensalem Amira Ayed Khaled Soulef Amamria Mohamed Ghanmi Fouad Zargouni 《Proceedings of the Geologists' Association. Geologists' Association》2019,130(1):66-75
The development of belt structures in intracratonic chains is guided by the convergence system. In the Southern-Central Tunisian Atlas, several parameters control the evolution of thrust folds during different tectonic phases. One of these phases is tectonic inheritance, which leads to the reactivation of pre-existing normal faults during compressive phases. The angle between the direction of these faults and the shortening axis (NNW-SSE) is the most important parameter for interpreting the mode of the evolution of thrust folds. Jebel Elkebar is an example of a structure developed on NW-SE-oriented faults that is perpendicular to the shortening axis. Based on the geometry of its folds, Jebel Elkebar is interpreted as a 'Fault Related Fold'. The E-W-oriented Orbata structure is oblique to the direction of the shortening axis and is interpreted through the model 'Fault Propagation Fold' with 'Breakthrough'. The Gafsa Fault, which is parallel to the shortening axis, is a transpressional fault interpreted through the 'Strain Partitioning' mode, which is associated with the oblique ramp fold. The development of various thrust folds requires the presence of a basal decollement level during the Triassic succession. In the Southern-Central Tunisian Atlas, the deformation is variable (geometry of fold closure) and is correlated with the depth of the decollement level; indeed, the intensity of deformation is proportional to the depth of the decollement level. Consequently, the most important deformation is in the higher successions and is a vertical migration of the decollement level associated with thin-skinned deformation. 相似文献
7.
C.A. Alfonso P.E. Sacks D.T. Secor J. Rine V. Perez 《Journal of South American Earth Sciences》1994,7(3-4)
Surface geology and heophysical data, supplemented by regional structural interpretations, indicate that the Valle del Cauca basin and adjacent areas in west-central Colombia form a west-vergent, basement-involved fold and thrust belt. This belt is part of a Cenozoic orogen developed along the west side of the Romeral fault system. Structural analysis and geometrical constraints show that the Mesozoic ophiolitic basement and its Cenozoic sedimentary cover are involved in a “thick-skinned” west-vergent foreland style deformation. The rocks are transported and shortened by deeply rooted thrust faults and stacked in imbricate fashion. The faults have a NE---SW regional trend, are listric in shape, developed as splay faults which are interpreted as joining a common detachment at over 10 km depth. The faults carry Paleogene sedimentary strata and Cretaceous basement rocks westward over Miocene strata of the Valle del Cauca Basin. Fold axes trend parallel or sub parallel to the thrust faults. The folds are westwardly asymmetrical with parallel to kink geometry, and are interpreted to be fault-propagation folds stacked in an imbricate thrust system. Stratigraphic evidence suggests that the Valle del Cauca basin was deformed between Oligocene and upper Miocene time. The kinematic history outlined above is consistent with an oblique convergence between the Panama and South American plates during the Cenozoic.A negative residual Bouguer anomaly of 20–70 mgls in the central part of the Valle del Cauca basin indicates that a substantial volume of low density sedimentary rocks is concealed beneath the thrust sheets exposed at the land surface. The hydrocarbon potential of the Valle del Cauca should be reevaluated in light of the structural interpretations presented in this paper. 相似文献
8.
David R. Gray 《Journal of Structural Geology》1995,17(12)
Emplacement of an upper crustal, leading imbricate-fan thrust belt in the Lachlan Fold Belt of eastern Australia was accomplished along a 0.5–1 km thick zone of heterogeneously deformed, low grade phyllonite in pelitic rock. Continuous recrystallization and neocrystallization of mica in a zone of transposition layering has provided a weak zone at the base of a 100 km wide × 150 km exposed length × 10 km thick thrust system. The basal deformation zone is characterized by a low-moderately dipping, strong-intense transposition foliation enclosing elongate fault-bounded slices (up to 20 km long × 5 km wide in map view) of disrupted Cambrian metavolcanics and Upper Ordovician black shales and slates. These are derived from a structurally lower zone of duplexing or from the overturned limbs of anticlinorial structures. The detachment zone is a 10–15 km wide zone of intense deformation showing a transition from open, upright folds with weak cleavage to inclined, tightisoclinal folds with strong axial surface cleavage. The intensity of minor faults also increases into the zone. Leading imbricate fan thrust belts show maximum deformation effects along the basal detachment which forms the frontal or leading fault. The leading imbricate geometry is due to emplacement of the basal detachment zone up the lowest and last formed imbricate thrust. Movement is along a relatively ductile, low viscosity ‘layer’ at the base where strain softening occurs with development of transposition layering. This enables confined ‘flow’ along the basal zone with transport and emplacement of the fold system and duplex zone to higher structural levels. Reaction-enhanced ductility and grain boundary sliding may be important deformation mechanisms responsible for this flow. Localized polydeformation, marked by mesofolds and crenulation cleavage, reflects the interaction between thrust sheets and the movement on faults. 相似文献
9.
10.
The collision of the Iranian microcontinent with the Afro-Arabian continent resulted in the deformation of the Zagros orogenic belt. The foreland of this belt in the Persian Gulf and Arabian platform has been investigated for its petroleum and gas resource potentials, but the Zagros hinterland is poorly investigated and our knowledge about its deformation is much less than other parts of this orogen. Therefore, this work presents a new geological map, stratigraphic column and two detailed geological cross sections. This study indicates the presence of a hinterland fold-and-thrust belt on northeastern side of the Zagros orogenic core that consists of in-sequence thrusting and basement involvement in this important part of the Zagros hinterland. The in-sequence thrusting resulted in first- and second-order duplex systems, Mode I fault-bend folding, fault-propagation folding and asymmetric detachment folding which indicate close relationships between folding and thrusting. Study of fault-bend folds shows that layer-parallel simple shear has the same role in the southeastern and northwestern parts of the study area (αe = 23.4 ± 9.1°). A major lateral ramp in the basement beneath the Talaee plain with about one kilometer of vertical offset formed parallel to the SW movement direction and perpendicular to the major folding and thrusting. 相似文献
11.
This paper describes the experimental deformation of models made with sheets of paraffin wax, simulating a bedded cover resting on a basement wrench fault. During the experiments, “en échelon” folds appear in the cover. As a result of early fault motion, folds first appear at heterogeneities in the bedding and with axes at about 45° to the trace of the wrench fault. Further fault displacement causes a bulk rotation of fold axes towards parallelism with the basement wrench fault, and a resulting curvature of fold axes at larger fault displacement.Folding affects an area which tends to quickly stabilize in width, since folding weakens the sheared cover and subsequent deformation is concentrated in it. Axial surfaces of folds are initially upright, then tend to become inclined with an external vergence, forming a fan centered on the basement wrench fault. Deeper layer-deformation, close to the basement, involves fold reorientations that are greater than in the upper layers. Therefore, down a given vertical line, there is no continuity between surface and deep structures. The geometry and orientation of folds appearing at later stages of wrenching is controlled by the geometry and orientation of already extant folds. 相似文献
12.
龙门山中段山前带浅层冲断系统的结构、形成与演化 总被引：4，自引：0，他引：4
本文依据断层相关褶皱几何学原理,对龙门山中段地震剖面进行了精细解释。研究发现,龙门山中段山前带浅层冲断系统存在多套滑脱层,具有上下分层变形特征。浅层滑脱层为上三叠统须家河组三段(T_3~x3)的碳质页岩夹煤层,其上发育双重构造和叠瓦构造;下三叠统嘉陵江组四、五段(T_1j~(4-5))的膏岩层,发育断层传播褶皱、冲起构造和构造楔;深层为下寒武统的泥页岩层,发育断层转折褶皱和滑脱褶皱。该区滑脱断层所控制的地层变形和缩短量各不相同,其中三叠系上统缩短量最大,大于30 km;三叠系下统至古生界地层缩短量约为14.5 km;侏罗系以上的地层缩短量则较小。研究区内的通济场断裂(F_3)为印支末期形成的一套逆冲断层组,其下部交于下寒武统滑脱层,深度约为10 km;关口断层(F_4)和彭县断裂(F_5)为晚侏罗世一早白垩世形成的逆冲断层,下部交与下三叠统嘉陵江组滑脱层,深度大约为8～10 km。这些断层以前展的方式破裂,并且长期活动。龙门山中段自中生代以来存在多期构造事件,主要发生诺利末期、印支晚幕、燕山期和喜马拉雅期。其中,燕山期和喜马拉雅期是龙门山活动最强烈的两个阶段,在龙门山中段山前带表现为大量断裂的长期活动,地壳缩短和龙门山快速隆升,并形成多种构造样式。 相似文献
13.
A. Farzipour-Saein F. Nilfouroushan H. Koyi 《International Journal of Earth Sciences》2013,102(8):2117-2135
Systematic analog models are run to study the variation in deformation across basement steps in the Zagros fold-thrust belt. Our model results demonstrate that basement configuration/topography influences the sedimentation thickness and, hence, the kinematics and geometric evolution of the fold and thrust belt. The greater the difference in thickness between the adjacent cover units across a basement step, the sharper and clearer will be the offset of the deformation front. Based on model results, we conclude that in a fold-thrust belt, where basement step/topography is covered by a layer of ductile salt acting as a decollement, the effect of the salt decollement on the evolution of the belt is far greater than the effect of thickness variation of the cover units. 相似文献
14.
We use scaled physical analog (centrifuge) modeling to investigate along- and across-strike structural variations in the Salt Range and Potwar Plateau of the Himalayan foreland fold-thrust belt of Pakistan. The models, composed of interlayered plasticine and silicone putty laminae, comprise four mechanical units representing the Neoproterozoic Salt Range Formation (basal detachment), Cambrian–Eocene carapace sequence, and Rawalpindi and Siwalik Groups (Neogene molasse), on a rigid base representing the Indian craton. Pre-cut ramps simulate basement faults with various structural geometries.A pre-existing north-dipping basement normal fault under the model foreland induces a frontal ramp and a prominent fault-bend-fold culmination, simulating the Salt Range. The ramp localizes displacement on a frontal thrust that occurs out-of-sequence with respect to other foreland folds and thrusts. With a frontal basement fault terminating to the east against a right-stepping, east-dipping lateral ramp, deformation propagates further south in the east; strata to the east of the lateral ramp are telescoped in ENE-trending detachment folds, fault-propagation folds and pop-up structures above a thick basal detachment (Salt Range Formation), in contrast to translated but less-deformed strata with E–W-trending Salt-Range structures to the west. The models are consistent with Salt Range–Potwar Plateau structural style contrasts being due to basement fault geometry and variation in detachment thickness. 相似文献
15.
The formation and structural evolution of the Jungfrau syncline is described, based on excellent outcrops occurring in the Lötschental, in the Central Alps of Switzerland. The quality of the outcrops allows us to demonstrate that the External Massifs of the Swiss Alps have developed due to internal folding. The Jungfrau syncline, which separates the autochtonous Gastern dome from the Aar massif basement gneiss folds, is composed of slivers of basement rocks with their Mesozoic sedimentary cover. In the Inner Faflertal, a side valley of the Lötschental, the 200 m thick syncline comprises four units, the Gastern massif with a reduced Mesozoic sedimentary cover in a normal stratigraphic succession, two units of overturned basement rocks with their Mesozoic sedimentary cover, and the overturned lower limb of the Tschingelhorn gneiss fold of the Aar massif with lenses of its sedimentary cover. Stratigraphy shows that the lower units, related to the Gastern massif, are condensed and that the upper units, deposited farther away from a Gastern paleo-high, form a more complete sequence, linked to the Doldenhorn Meso-Cenozoic basin fill. The integration of these local observations with published regional data leads to the following model. On the northern margin of the Doldenhorn basin, at the northern fringe of the Alpine Tethys, the pre-Triassic crystalline basement and its Mesozoic sedimentary cover were folded by ductile deformation at temperatures above 300 °C and in the presence of high fluid pressures, as the Helvetic and Penninic nappes were overthrusted towards the northwest during the main Alpine deformation phase. The viscosity contrast between the basement gneisses and the sediments caused the formation of large basement anticlines and tight sedimentary synclines (mullion-type structures). The edges of basement blocks bounded by pre-cursor SE-dipping normal faults at the northwestern border of the Doldenhorn basin were deformed by simple shear, creating overturned slices of crystalline rocks with their sedimentary cover in what now forms the Jungfrau syncline. The localisation of ductile deformation in the vicinity of pre-existing SE-dipping faults is thought to have been helped by the circulation of fluids along the faults; these fluids would have been released from the Mesozoic sediments by metamorphic dehydration reactions accompanied by creep and dynamic recrystallisation of quartz at temperatures above 300 °C. Quantification of the deformation suggests a strain ellipsoid with a ratio (1+ e1 / 1+ e3) of approximately 1000. The Jungfrau syncline was deformed by more brittle NW-directed shear creating well-developed shear band cleavages at a late stage, after cooling by uplift and erosion. It is suggested that the external massifs of the Alps are basement gneiss folds created at temperatures of 300 °C by detachment through ductile deformation of the upper crust of the European plate as it was underthrusted below the Adriatic plate. 相似文献
16.
Existence of a possible detachment zone at Elampillai region, NW margin of Kanjamalai Hills, located in the northern part of Cauvery Suture Zone (CSZ), Southern India, is reported here for the first time. Detailed structural mapping provides anatomy of the zone, which are rarely preserved in Precambrian high grade terranes. The detachment surface separates two distinct rock units of contrasting lithological and structural characters: the upper and lower units. The detachment zone is characterized by a variety of fold styles with the predominance of tight isoclinal folds with varied plunge directions, limb rotations and the hinge line variations often leading to lift-off fold like geometries and deformed sheath folds. Presence of parasitic folding and associated penetrative strains seem to be controlled by differences in mechanical stratigraphy, relative thicknesses of the competent and incompetent units, and the structural relief of the underlying basement. Our present study in conjunction with other available geological, geochemical and geochronological data from the region indicates that the structures of the detachment zone are genetically related to thrust tectonics forming a part of subduction–accretion–collision tectonic history of the Neoproterozoic Gondwana suture. 相似文献
17.
Mohammad D. Fakhari Gary J. Axen Brian K. Horton Jamshid Hassanzadeh Abdolhossein Amini 《Tectonophysics》2008,451(1-4):170-185
The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).
The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.
The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland. 相似文献
18.
The Darreh Sary metapelitic rocks are located in the northeast of Zagros orogenic belt and Sanandaj-Sirjan structural zone. The lithological composition of these rocks includes slate, phyllite, muscovitebiotite schist, garnet schist, staurolite-garnet schist and staurolite schist. The shale is the protolith of these metamorphic rocks, which was originated from the continental island arc tectonic setting and has been subjected to processes of Zagros orogeny. The deformation mechanisms in these rocks include bulging recrystallization (BLG), subgrain rotation recrystallization (SGR) and grain boundary migration recrystallization (GBM), which are considered as the key to estimate the deformation temperature of the rocks. The estimated ranges of deformation temperature and depth in these rocks show the temperatures of 275–375, 375–500, and >500°C and the depths of 10 to 17 km. The observed structures in these rocks such as faults, fractures and folds, often with the NW-SE direction coordinate with the structural trends of Zagros orogenic belt structures. The S-C mylonite fabrics is observed in these rocks with other microstructures such as mica fish, σ fabric and garnet deformation indicate the dextral shear deformation movements of study area. Based on the obtained results of this research, the stages of tectonic evolution of Darreh Sary area were developed. 相似文献
19.
20.
川东侏罗山式褶皱构造带的物理模拟研究 总被引：4，自引：0，他引：4
川东地区发育一系列NE走向的侏罗山式褶皱构造,按照褶皱的组合形态,自东向西发育隔槽式褶皱和隔档式褶皱,齐岳山断裂是二者的分界线。本文采取物理模拟手段对川东侏罗山式褶皱形成的控制因素进行实验研究,选取硅树脂模拟滑脱层,石英砂和微玻璃珠模拟沉积盖层,改变盖层与基底之间摩擦力、盖层的物性、滑脱层的埋藏深度等因素。模拟实验研究表明,滑脱层的深度和盖层性质是川东侏罗山式褶皱形成的主要控制因素。齐岳山断裂以东地区主要是下寒武统膏页岩充当滑脱层,滑脱层埋深较大,地表构造形态表现为隔槽式褶皱;齐岳山断裂以西地区,下二叠统泥质灰岩充当滑脱层,埋深较浅,盖层表现为隔档式褶皱。微玻璃珠是模拟侏罗山式褶皱较好的实验材料,推测川东薄皮构造带形成时候以塑形变形为主。 相似文献