共查询到20条相似文献，搜索用时 78 毫秒
1.
A comparison of the internal structure of Earth-like planets is unavoidable to understand the formation and evolution of the solar system, and the differences between Earth’s, Mars’, and Venus’ atmospheres, surfaces and tectonic behaviors. Recent studies point at the role of core structure and dynamics in the evolution of the atmosphere, mantle and crust. On Earth, the crust thickness and the radius and physical state of the cores are known for almost one century, since the advent of seismological observations, but the lack of long-term surface-based geodetic, electromagnetic and seismological observations on the other planets, results in very large uncertainties on the crust thickness, on the temperature and composition of their mantle, and on the size and physical state of their cores. According to the currently available geodetic data, Mars’ dimensionless mean-moment-of-inertia ratio is equal to 0.3653±0.0008. When combined with geochemical observations and with the inputs of laboratory experiments on planetary materials at high pressure and high temperature, this result constrains a narrow range of density values for Mars’ mantle and favors a light [6200-6765 kg m−3] sulfur-rich core, but it still allows for a 1600-1750 km range for the core radius, i.e. an uncertainty at least ten times larger than the precision obtained in 1913 by Gutenberg for the Earth’s core. Mars’ mantle density distribution may be explained by a large range of temperatures and mineralogical compositions, either olivine- or pyroxene-rich. The unknown mean thickness of Mars’ crust makes necessary a number of working assumptions for the interpretation of gravimetric and magnetic data. The situation is worse for Venus, and the most conservative model of its deep interior is a transposition of the Earth’s structure scaled to Venus’ radius and mass. The temperature conditions at the surface of this planet hardly make possible long-term ground-based measurements, but this is indeed feasible at the surface of Mars. Precise measurements of Mars’ crust thickness, core radius and structure, and the proof of the existence or absence of an inner core, would put tight constraints on mantle dynamics and thermal evolution, and on possible scenarios leading to the extinction of Mars’ magnetic field about 4.0 Ga ago. Long-lasting surface-based geodetic, seismological and magnetic observations would provide this information, as well as the distributions as a function of depth of the density, elastic and anelastic parameters, and electrical conductivity. Current studies on the structure of Earth’s deep interior demonstrate that the latter data set, when constrained by laboratory experiments, may be inverted in terms of temperature, chemical, and mineralogical compositions. 相似文献
2.
We have reinvestigated the coupled thermal and crustal evolution of Mars taking new laboratory data concerning the flow behavior of iron-rich olivine into account. The low mantle viscosities associated with the relatively higher iron content of the martian mantle as well as the observed high concentrations of heat producing elements in a crust with a reduced thermal conductivity were found to promote phases of crustal recycling in many models. As crustal recycling is incompatible with an early separation of geochemical reservoirs, models were required to show no episodes of crustal recycling. Furthermore, admissible models were required to reproduce the martian crust formation history, to allow for the formation of partial melt under present day mantle conditions and to reproduce the measured concentrations of potassium and thorium on the martian surface. Taking dehydration stiffening of the mantle viscosity by the extraction of water from the mantle into account, we found that admissible models have low initial upper mantle temperatures around 1650 K, preferably a primordial crustal thickness of 30 km, and an initially wet mantle rheology. The crust formation process on Mars would then be driven by the extraction of a primordial crust after core formation, cooling the mantle to temperatures close to the peridotite solidus. According to this scenario, the second stage of global crust formation took place over a more extended period of time, waning at around 3500 Myr b.p., and was driven by heat produced by the decay of radioactive elements. Present-day volcanism would then be driven by mantle plumes originating at the core-mantle boundary under regions of locally thickened, thermally insulating crust. Water extraction from the mantle was found to be relatively efficient and close to 40% of the total inventory was lost from the mantle in most models. Assuming an initial mantle water content of 100 ppm and that 10% of the extracted water is supplied to the surface, this amount is equivalent to a 14 m thick global surface layer, suggesting that volcanic outgassing of H2O could have significantly influenced the early martian climate and increased the planet’s habitability. 相似文献
3.
The rheology of the Martian mantle and the planet's initial temperature is constrained with thermal evolution models that include crust growth and test the conditions for magnetic field generation in the core. As observations we use the present-day average crustal thickness of 50-120 km as estimated from the Mars Global Surveyor gravity and topography data, the evidence for the crust being produced mostly early, with a rate declining from the Noachian to the Hesperian, and the evidence for an early magnetic field that likely existed for less than a billion years. We use the fact that the rate of crust growth is a function of temperature, which must be above the solidus in the sub-lithosphere mantle, and the mantle convection speed because the latter determines the rate at which melt can be replenished. The convection speed is a strong function of viscosity which, in turn, is a strong function of temperature and also of the water content of the mantle. We use a viscosity parameterization with a reference viscosity evaluated at 1600 K the value of which can be characteristic of either a dry or a wet mantle. We further consider the Fe-FeS phase diagram for the core and compare the core liquidus estimated for a sulphur content of 14% as suggested by the SNC meteorite compositions with the core temperatures calculated for our cooling models. Two data sets of the Fe-FeS eutectic temperature have been used that differ by about 200 K [Böhler, R., 1996. Fe-FeS eutectic temperatures at 620 kbar. Phys. Earth Planet. Inter. 96, 181-186; Fei, Y., Bertka, C.M., Finger, L.W., 1997. High-pressure iron-sulphur compound, Fe3S2, and melting relations in the Fe-FeS system. Science 275, 1621-1623] at Martian core-mantle boundary pressure and in the eutectic composition by 5 wt%. The differences in eutectic temperature and composition translate into a difference of about 400 K in liquidus temperature for 14 wt% sulphur.We find it premature to rule out specific mantle rheologies on the basis of the presently available crustal thickness and crust growth evidence. Rather a trade-off exists between the initial mantle temperature and the reference viscosity. Both a wet mantle rheology with a reference viscosity less than 1020 Pas and a dry mantle rheology with a reference viscosity of 1021 Pas or more can be acceptable if initial mantle temperatures between roughly 1700 and 2000 K are allowed. To explain the magnetic field history, the differences in liquidus temperatures matter. For a liquidus temperature of about 1900 K at the Martian core-mantle boundary as calculated from the Böhler et al. eutectic, a dry mantle rheology can best explain the lack of a present-day dynamo. For a liquidus temperature of about 1500 K at the core-mantle boundary as calculated from the Fei et al. eutectic all models are consistent with the observed lack of dynamo action. The reason lies with the fact that at 14 wt% S the Martian core would be close to the eutectic composition if the Fei et al. data are correct. As inner core growth is unlikely for an almost eutectic core, the early field would have been generated by a thermally driven dynamo. Together with the measured strength of the Martian crustal magnetization this would prove the feasibility of a strong thermally driven dynamo. 相似文献
4.
During late-stage planet formation, giant impacts produce localized mantle melt regions within which impactor iron droplets settle to the bottom near a permeability horizon. After accumulation, iron heated by the impact migrates downward to the core through colder, mostly solid mantle. The degree of thermal equilibration and partitioning of viscous heating between impactor iron and silicates depends on the mechanism of iron transport to the core. Simple estimates suggest that, following a giant impact, the temperature difference between iron delivered to the core and the mantle outside the impact heated region can be ∼103 K. Hot impactor iron mergers with the core where it may be efficiently mixed or remain stratified due to thermal buoyancy. In either case, collisional energy carried to the core by impactor iron helps establish conditions favorable for early core cooling and dynamo generation. In this study, we consider the end-member scenario in which impactor iron forms a layer at the top of the core. Energy transfer from the impactor iron layer to the mantle is sufficient to power a dynamo for up to ∼30 Myr even in the limit of a very viscous mantle and heat flux limited by conduction. Using two-dimensional finite element calculations of mantle convection, we show that large-scale mantle flow driven by the buoyancy of the impact thermal anomaly focuses plumes in the impact region and increases both dynamo strength and duration. Melting within the mantle thermal boundary layer likely leads to formation of a single superplume in the location of the impact anomaly driven upwelling. We suggest that formation of magnetized southern highland crust may be related to spreading and differentiation of an impact melt region during the impact-induced dynamo episode. 相似文献
5.
Depth-dependent interior structure models of Mercury are calculated for several plausible chemical compositions of the core and of the mantle. For those models, we compute the associated libration amplitude, obliquity, tidal deformation, and tidal changes in the external potential. In particular we study the relation between the interior structure parameters for five different mantle mineralogies and two different temperature profiles together with two extreme crust density values. We investigate the influence of the core light element concentration, temperature, and melting law on core state and inner and outer core size. We show that a sulfur concentration above 10 wt% is unlikely if the temperature at the core-mantle boundary is above 1850 K and the silicate shell at least 240 km thick. The interior models can only have an inner core if the sulfur weight fraction is below 5 wt% for core-mantle boundary temperature in the 1850-2200 K range. Within our modeling hypotheses, we show that with the expected precision on the moment of inertia the core size can be estimated to a precision of about 50 km and the core sulfur concentration with an error of about 2 wt%. This uncertainty can only be reduced when more information on the mantle mineralogy of Mercury becomes available. However, we show that the uncertainty on the core size estimation can be greatly reduced, to about 25 km, if tidal surface displacements and tidal variations in the external potential are considered. 相似文献
6.
Javier Ruiz Patrick J. McGovern Valle López Jean-Pierre Williams Rosa Tejero 《Icarus》2011,215(2):508-517
Lithospheric strength can be used to estimate the heat flow at the time when a given region was deformed, allowing us to constrain the thermal evolution of a planetary body. In this sense, the high (>300 km) effective elastic thickness of the lithosphere deduced from the very limited deflection caused by the north polar cap of Mars indicates a low surface heat flow for this region at the present time, a finding difficult to reconcile with thermal history models. This has started a debate on the current heat flow of Mars and the implications for the thermal evolution of the planet. Here we perform refined estimates of paleo-heat flow for 22 martian regions of different periods and geological context, derived from the effective elastic thickness of the lithosphere or from faulting depth beneath large thrust faults, by considering regional radioactive element abundances and realistic thermal conductivities for the crust and mantle lithosphere. For the calculations based on the effective elastic thickness of the lithosphere we also consider the respective contributions of crust and mantle lithosphere to the total lithospheric strength. The obtained surface heat flows are in general lower than the equivalent radioactive heat production of Mars at the corresponding times, suggesting a limited contribution from secular cooling to the heat flow during the majority of the history of Mars. This is contrary to the predictions from the majority of thermal history models, but is consistent with evidence suggesting a currently fluid core, limited secular contraction for Mars, and recent extensive volcanism. Moreover, the interior of Mars could even have been heating up during part of the thermal history of the planet. 相似文献
7.
Thermal evolutions of the terrestrial planets 总被引：1，自引：0，他引：1
The thermal evolution of the Moon, Mercury, Mars, Venus and hypothetical minor planets is calculated theoretically, taking into account conduction, solid-state convection, and differentiation. An assortment of geological, geochemical, and geophysical data is used to constrain both the present day temperatures and thermal histories of the planets' interiors. Such data imply that the planets were heated during or shortly after formation and that all the terrestrial planets started their differentiations early in their history. Initial temperatures and core formation play the most important roles in the early differentiation. The size of the planet is the primary factor in determining its present day thermal state. A planetary body with radius less than 1000 km is unlikely to reach melting given heat source concentrations similar to terrestrial values and in the absence of intensive early heating such as short half-life radioactive heating and inductive heating.Studies of individual planets are constrained by varying amounts of data. Most data exist for the Earth and Moon. The Moon is a differentiated body with a crust, a thick solid mantle and an interior region which may be partially molten. It is presently cooling rapidly and is relatively inactive tectonically.Mercury most likely has a large core. Thermal calculations indicate it may have a 500 km thick solid lithosphere, and the core may be partially molten if it contains some heat sources. If this is not the case, the planet's interior temperatures are everywhere below the melting curve for iron. The thermal evolution is dominated by core separation and the high conductivity of iron which makes up the bulk of Mercury.Mars, intermediate in size among the terrestrial planets, is assumed to have differentiated an Fe–FeS core. Differentiation and formation of an early crust is evident from Mariner and Viking observations. Theoretical models suggest that melting and differentiation of the mantle silicates has occurred at least up until 1 billion years ago. Present day temperature profiles indicate a relatively thick (250 km) lithosphere with a possible asthenosphere below. The core is molten.Venus is characterized as a planet similar to the Earth in many respects. Core formation probably occurred during the first billion years after the formation. Present day temperatures indicate a partially molten upper mantle overlain by a 100 km thick lithosphere and a molten Fe–Ni core. If temperature models are good indicators, we can expect that today, Venus has tectonic processes similar to the Earth's.Paper dedicated to Professor Hannes Alfvén on the occasion of his 70th birthday, 30 May 1978. 相似文献
8.
In the frame of a comparison between Earth, Venus, and Mars, a vision on future geodesy missions to Mars is discussed with particular focus on furthering our understanding of the interior, rotation, and orientation of this terrestrial planet. We explain how radioscience instruments can be used to observe the rotation and orientation and therewith to study the deep interior of Mars and its global atmosphere dynamics. Transponders in X-band and Ka-band are proposed with radio links between a lander or a rover and an orbiter around Mars and/or directly to the Earth. The radio budget links are studied in the frame of possible mission constraints and simulations are performed, which show that important information on the interior of Mars can be obtained from the radioscience data. From the observation of Mars’ orientation in space and of tidal effects on a spacecraft orbiting around Mars we show that it is possible for instance to constrain the dimension and composition of the core, the percentage of light element within the core, and to determine the presence of a pressure-induced mineral-phase transition at the bottom of the mantle. 相似文献
9.
Moderately and slightly siderophile element constraints on the depth and extent of melting in early Mars 总被引：1，自引：0，他引：1
The thermal history of Mars during accretion and differentiation is important for understanding some fundamental aspects of its evolution such as crust formation, mantle geochemistry, chronology, volatile loss and interior degassing, and atmospheric development. In light of data from new Martian meteorites and exploration rovers, we have made a new estimate of Martian mantle siderophile element depletions. New high pressure and temperature metal–silicate experimental partitioning data and expressions are also available. Using these new constraints, we consider the conditions under which the Martian mantle may have equilibrated with metallic liquid. The resulting conditions that best satisfy six siderophile elements—Ni, Co, W, Mo, P, and Ga—and are consistent with the solidus and liquidus of the Martian mantle phase diagram are a pressure of 14 ± 3 GPa and temperature of 2100 ± 200 K. The Martian mantle depletions of Cr and V are also consistent with metal–silicate equilibration in this pressure and temperature range if deep mantle silicate phases are also taken into account. The results are not consistent with either metal–silicate equilibrium at the surface or at the current‐day Martian core–mantle boundary. Recent measurements and modeling have concluded that deep (～17 GPa or 1350 km) mantle melting is required to explain isotopic data for Martian meteorites and the nature of differentiation into core, mantle, and crust. This is in general agreement with our estimates of the conditions of Martian core formation based on siderophile elements that result in an intermediate depth magma ocean scenario for metal–silicate equilibrium. 相似文献
10.
The thermal evolution of the Moon as it can be defined by the available data and theoretical calculations is discussed. A wide assortment of geological, geochemical and geophysical data constrain both the present-day temperatures and the thermal history of the lunar interior. On the basis of these data, the Moon is characterized as a differentiated body with a crust, a 1000-km-thick solid mantle (lithosphere) and an interior region (core) which may be partially molten. The presence of a crust indicates extensive melting and differentiation early in the lunar history. The ages of lunar samples define the chronology of igneous activity on the lunar surface. This covers a time span of about 1.5 billion yr, from the origin to about 3.16 billion yr ago. Most theoretical models require extensive melting early in the lunar history, and the outward differentiation of radioactive heat sources.Thermal history calculations, whether based on conductive or convective computation codes define relatively narrow bounds for the present day temperatures in the lunar mantle. In the inner region of the 700 km radius, the temperature limits are wider and are between about 100 and 1600°C at the center of the Moon. This central region could have a partially or totally molten core.The lunar heat flow values (about 30 ergs/cm2s) restrict the present day average uranium abundance to 60 ± 15 ppb (averaged for the whole Moon) with typical ratios of K/U = 2000 and Th/U = 3.5. This is consistent with an achondritic bulk composition for the Moon.The Moon, because of its smaller size, evolved rapidly as compared to the Earth and Mars. The lunar interior is cooling everywhere at the present and the Moon is tectonically inactive while Mars could be and the Earth is definitely active. 相似文献
11.
Large impacts not only create giant basins on terrestrial planets but also heat their interior by shock waves. We investigate the impacts that have created the largest basins existing on the planets: Utopia on Mars, Caloris on Mercury, Aitken on Moon, all formed at ∼4 Ga. We determine the impact-induced temperature increases in the interior of a planet using the “foundering” shock heating model of Watters et al. (Watters, W.A., Zuber, M.T., Hager, B.H. [2009]. J. Geophys. Res. 114, E02001. doi:10.1029/2007JE002964). The post-impact thermal evolution of the planet is investigated using 2D axi-symmetric convection in a spherical shell of temperature-dependent viscosity and thermal conductivity, and pressure-dependent thermal expansion. The impact heating creates a superheated giant plume in the upper mantle which ascends rapidly and develops a strong convection in the mantle of the sub-impact hemisphere. The upwelling of the plume rapidly sweeps up the impact-heated base of the mantle away from the core-mantle boundary and replaces it with the colder surrounding material, thus reducing the effects of the impact-heated base of the mantle on the heat flux out of core. However, direct shock heating of the core stratifies the core, suppresses the pre-existing thermal convection, and cripples a pre-existing thermally-driven core dynamo. It takes about 17, 4, and 5 Myr for the stratified cores of Mars, Mercury, and Moon to exhaust impact heat and resume global convection, possibly regenerating core dynamos. 相似文献
12.
Mikhail Yu. Zolotov 《Icarus》2009,204(1):183-193
The dwarf planet Ceres has a density of 2040-2250 kg m−3, and a dark non-icy surface with signs of hydrated minerals. As opposed to a differentiated internal structure with a nonporous rocky core and a water mantle, there are arguments for undifferentiated porous interior structure. Ceres’ mass and dimensions are uncertain and do not exclude undifferentiated interior even if hydrostatic equilibrium is attained. The rocky surface may be inconsistent with a large-scale water-rock differentiation. A differentiated structure with a thick water mantle below a rocky crust is gravitationally unstable and an overturn would have led to abundant surface salt deposits, which are not observed. A formation of hydrated surface minerals caused by internal heating implies a major density increase through devolatilization of the interior. A later accumulation of hydrated materials is inconsistent with anhydrous surfaces of many asteroids and with a low rate of the cosmic dust deposition in the inner Solar System. Ceres’ internal pressures (<140-200 MPa) are insufficient to significantly reduce porosity of chondritic materials and there is no need for abundant water phases to be present to account for the bulk density. Having the porosity of ordinary chondrites (∼10%), Ceres can consist of rocks with the grain density of pervasively hydrated CI carbonaceous chondrites. However, additional low-density phases (e.g., water ice) require to be present in the body with the grain density of CM chondrites. The likely low-density mineralogy of the interior implies Ceres’ accretion from pervasively aqueously altered carbonaceous planetesimals depleted in short-lived radionuclide 26Al. Abundant water ice may not have accreted. Limited heat sources after accretion may not have caused major mineral dehydration leading to formation of water mantle. These inferences can be tested with the Dawn spacecraft in 2015. 相似文献
13.
Conventional evolutionary models for Mars adopt a dry mantle solidus. Taking into account the condensation conditions in the preplanetary nebula in the accretion zone of Mars, it can be concluded that large amounts of water or hydrated silicates have condensed in those regions. Therefore, water influences significantly the melting behaviour and the viscosity of the silicatic material. A model for the calculation of the thermal history of a planet is constructed. On this basis, and use of water — saturated solidus — it is possible to derive that the core is not liquid, as given in models employing a dry mantle solidus, but solid to a large extent, which prevents the operation of a large-scale dynamo and explains in that way the lack of a magnetic field. With these assumptions one can construct a possible evolutionary scheme that covers early crust differentiation, a hot thermal past and the missing magnetic field at present. 相似文献
14.
Alberto G. Fairén 《Icarus》2010,208(1):165-48
Water on Mars has been explained by invoking controversial and mutually exclusive solutions based on warming the atmosphere with greenhouse gases (the “warm and wet” Mars) or on local thermal energy sources acting in a global freezing climate (the “cold and dry” Mars). Both have critical limitations and none has been definitively accepted as a compelling explanation for the presence of liquid water on Mars. Here is considered the hypothesis that cold, saline and acidic liquid solutions have been stable on the sub-zero surface of Mars for relatively extended periods of time, completing a hydrogeological cycle in a water-enriched but cold planet. Computer simulations have been developed to analyze the evaporation processes of a hypothetical martian fluid with a composition resulting from the acid weathering of basalt. This model is based on orbiter- and lander-observed surface mineralogy of Mars, and is consistent with the sequence and time of deposition of the different mineralogical units. The hydrological cycle would have been active only in periods of dense atmosphere, as having a minimum atmospheric pressure is essential for water to flow, and relatively high temperatures (over ∼245 K) are required to trigger evaporation and snowfall; minor episodes of limited liquid water on the surface could have occurred at lower temperatures (over ∼225 K). During times with a thin atmosphere and even lesser temperatures (under ∼225 K), only transient liquid water can potentially exist on most of the martian surface. Assuming that surface temperatures have always been maintained below 273 K, Mars can be considered a “cold and wet” planet for a substantial part of its geological history. 相似文献
15.
We present the results of extensive numerical modeling of the Martian interior. Yoder et al. in 2003 reported a mean moment of inertia of Mars that was somewhat smaller than the previously used value and the Love number k2 obtained from observations of solar tides on Mars. These values of k2 and the mean moment of inertia impose a strong new constraint on the model of the planet. The models of the Martian interior are elastic, while k2 contains both elastic and inelastic components. We thoroughly examined the problem of partitioning the Love number k2 into elastic and inelastic components. The information necessary to construct models of the planet (observation data, choice of a chemical model, and the cosmogonic aspect of the problem) are discussed in the introduction. The model of the planet comprises four submodels—a model of the outer porous layer, a model of the consolidated crust, a model of the silicate mantle, and a core model. We estimated the possible content of hydrogen in the core of Mars. The following parameters were varied while constructing the models: the ferric number of the mantle (Fe#) and the sulfur and hydrogen content in the core. We used experimental data concerning the pressure and temperature dependence of elastic properties of minerals and the information about the behavior of Fe(γ-Fe ), FeS, FeH, and their mixtures at high P and T. The model density, pressure, temperature, and compressional and shear velocities are given as functions of the planetary radius. The trial model M13 has the following parameters: Fe#=0.20; 14 wt % of sulfur in the core; 50 mol % of hydrogen in the core; the core mass is 20.9 wt %; the core radius is 1699 km; the pressure at the mantle-core boundary is 20.4 GPa; the crust thickness is 50 km; Fe is 25.6 wt %; the Fe/Si weight ratio is 1.58, and there is no perovskite layer. The model gives a radius of the Martian core within 1600–1820 km while ≥30 mol % of hydrogen is incorporated into the core. When the inelasticity of the Martian interior is taken into account, the Love number k2 increases by several thousandths; therefore, the model radius of the planetary core increases as well. The prognostic value of the Chandler period of Mars is 199.5 days, including one day due to inelasticity. Finally, we calculated parameters of the equilibrium figure of Mars for the M13 model: J 2 0 = 1.82 × 10?3, J 4 0 = ?7.79 × 10?6, e c-m D = 1/242.3 (the dynamical flattening of the core-mantle boundary). 相似文献
16.
《天文和天体物理学研究(英文版)》2010,(8)
This review provides explanations of how geodesy, rotation and gravity can be addressed using radioscience data of an orbiter around a planet or of the lander on its surface.The planet Mars is the center of the discussion.The information one can get from orbitography and radioscience in general concerns the global static gravitational field, the time variation of the gravitational field induced by mass exchange between the atmosphere and the ice caps, the time variation of the gravitational field induced by the tides, the secular changes in the spacecraft's orbit induced by the little moons of Mars named Phobos and Deimos, the gravity induced by particular targets, the Martian ephemerides, and Mars' rotation and orientation.The paper addresses as well the determination of the geophysical parameters of Mars and, in particular, the state of Mars' core and its size, which is important for understanding the planet's evolution.Indeed, the state and dimension of the core determined from the moment of inertia and nutation depend in turn on the percentage of light elements in the core as well as on the core temperature, which is related to heat transport in the mantle.For example, the radius of the core has implications for possible mantle convection scenarios and, in particular, for the presence of a perovskite phase transition at the bottom of the mantle.This is also important for our understanding of the large volcanic province Tharsis on the surface of Mars. 相似文献
17.
Mars is the fourth planet out from the sun. It is a terrestrial planet with a density suggesting a composition roughly similar
to that of the Earth. Its orbital period is 687 days, its orbital eccentricity is 0.093 and its rotational period is about
24 hours. Mars has two small moons of asteroidal shapes and sizes (about 11 and 6 km mean radius), the bigger of which, Phobos,
orbits with decreasing semimajor orbit axis. The decrease of the orbit is caused by the dissipation of tidal energy in the
Martian mantle. The other satellite, Deimos, orbits close to the synchronous position where the rotation period of a planet
equals the orbital period of its satellite and has hardly evolved with time. Mars has a tenous atmosphere composed mostly
of CO with strong winds and with large scale aeolian transport of surface material during dust storms and in sublimation-condensation
cycles between the polar caps. The planet has a small magnetic field, probably not generated by dynamo action in the core
but possibly due to remnant magnetization of crustal rock acquired earlier from a stronger magnetic field generated by a now
dead core dynamo. A dynamo powered by thermal power alone would have ceased a few billions of years ago as the core cooled
to an extent that it became stably stratified. Mars' topography and its gravity field are dominated by the Tharsis bulge,
a huge dome of volcanic origin. Tharsis was the major center of volcanic activity, a second center is Elysium about 100° in
longitude away. The Tharsis bulge is a major contributor to the non-hydrostaticity of the planet's figure. The moment of inertia
factor together with the mass and the radius presently is the most useful constraint for geophysical models of the Martian
interior. It has recently been determined by Doppler range measurements to the Mars Pathfinder Lander to be (Folkner et al. 1997). In addition, models of the interior structure use the chemistry of the SNC meteorites which are widely
believed to have originated on Mars. According to the models, Mars is a differentiated planet with a 100 to 200 km thick basaltic
crust, a metallic core with a radius of approximately half the planetary radius, and a silicate mantle. Mantle dynamics is
essential in forming the elements of the surface tectonics. Models of mantle convection find that the pressure-induced phase
transformations of -olivine to -spinel, -spinel to -spinel, and -spinel to perovskite play major roles in the evolution of mantle flow fields and mantle temperature. It is not very likely
that the -spinel to perovskite transition is present in Mars today, but a few 100 km thick layer of perovskite may have been present
in the lower mantle immediately above the core-mantle boundary early in the Martian history when mantle temperatures were
hotter than today. The phase transitions act to reduce the number of upwellings to a few major plumes which is consistent
with the bipolar distribution of volcanic centers of Mars. The phase transitions also cause a partial layering of the lower
mantle which keeps the lower mantle and the core from extensive cooling over the past aeons. A relatively hot, fluid core
is the most widely accepted explanation for the present lack of a self-generated magnetic field. Growth of an inner core which
requires sub-liquidus temperatures in the core would have provided an efficient mechanism to power a dynamo up to the present
day.
Received 10 May 1997 相似文献
18.
Theoretical physical models of the Martia interior are presented in the light of new and revised data and constraints. These models include thermal evolution, densities, and seismic wave velocities. The interior of Mars appears to be Earth-like in many respects. Although thermal models indicate that Mars has passed its peak of evolution it may still have an asthenosphere and may be moderately active tectonically. Mars has an Fe-FeS core with a radius of and may be moderately active tectonically. Mars has an Fe-FeS core with a radius of 1500–2000 km. The mantle is enriched in FeO with an olivine composition of about Fo75. Theoretically determined seismic wave velocities are relatively well constrained in the mantle with upper-mantle Pn velocities ranging from 7.64 to 7.80 km/sec. However, there are wide variations in VP in the core dependent on composition. The shadow zone due to the core is larger than the Earth's. 相似文献
19.
Of the terrestrial planets, Earth and probably Mercury possess substantial intrinsic magnetic fields generated by core dynamos, while Venus and Mars apparently lack such fields. Thermal histories are calculated for these planets and are found to admit several possible present states, including those which suggest simple explanations for the observations; whule the cores of Earth and Mercury are continuing to freeze, the cores of Venus and Mars may still be completely liquid. The models assume whole mantle convection, which is parameterized by a simple Nusselt-Rayleigh number relation and dictates the rate at which heat escapes from the core. It is found that completely fluid cores, devoid of intrinsic heat sources, are not likely to sustain thermal convection for the age of the solar system but cool to a subadiabatic, conductive state that can not maintain a dynamo. Planets which nucleate an inner core continue to sustain a dynamo because of the gravitational energy release and chemically driven convection that accompany inner core growth. The absence of a significant inner core can arise in Venus because of its slightly higher temperature and lower central pressure relative to Earth, while a Martian core avoids the onset of freezing if the abundance of sulfur in the core is ?15% by mass. All of the models presented assume that (I) core dynamos are driven by thermal and/or chemical convection; (ii) radiogenic heat production is confined to the mantle; (iii) mantle and core cool from initially hot states which are at the solidus and superliquidus, respectively; and (iv) any inner core excludes the light alloying material (sulfur or oxygen) which then mixes uniformly upward through the outer core. The models include realistic pressure and composition-dependent freezing curves for the core, and material parameters are chosen so that the correct present-day values of heat outflow, upper mantle temperature and viscosity, and inner core radius are obtained for the earth. It is found that Venus and Mars may have once had dynamos maintained by thermal convection alone. Earth may have had a completely fluid core and a dynamo maintained by thermal convection for the first 2 to 3 by, but an inner core nucleates and the dynamo energetics are subsequently dominated by gravitational energy release. Complete freezing of the Mercurian core is prohibited if it contains even a small amount of sulfur, and a dynamo can be maintained by chemical convection in a thin, fluid shell. 相似文献
20.
Data from the recent gravity measurements by the Galileo mission are used to construct wide ranges of interior structure and composition models for the Galilean satellites of Jupiter. These models show that mantle densities of Io and Europa are consistent with an olivine-dominated mineralogy with the ratios of Mg to Fe components depending on mantle temperature for Io and on ice shell thickness for Europa. The mantle density and composition depend relatively little on core composition. The size of the core is largely determined by the core's composition with core radius increasing with the concentration of a light component such as sulfur. For Io, the range of possible core sizes is between 38 and 53% of the satellite's radius. For Europa, there is also a substantial effect of the thickness of the ice layer which is varied between 120 and 170 km on the core size. Core sizes are between 10 and 45% of Europa's radius. The core size of Ganymede ranges between one-quarter and one-third of the surface radius depending on its sulfur content and the thickness of the ice shell. A subset of the Ganymede models is consistent with an olivine-dominated mantle mineralogy. The thickness of the silicate mantle above the core varies between 900 and 1100 km. The outermost ice shell is about 900 km in thickness and is further subdivided by pressure-induced phase transitions into ice I, ice III, ice V, and ice VI layers. Callisto should be differentiated, albeit incompletely. It is proposed that this satellite was never molten at a large scale but differentiated through the convective gradual unmixing of the ice and the metal/rock component. Bulk iron-to-silicon ratios Fe/Si calculated for the inner pair of satellites, Io and Europa, are less than the CI carbonaceous chondrite value of 1.7±0.1, whereas ratios for the outer pair, Ganymede and Callisto, cover a broad range above the chondritic value. Although the ratios are uncertain, in particular for Ganymede and Callisto, the values are sufficiently distinct to suggest a difference in composition between these two pairs of satellites. This may indicate a difference in iron-silicon fractionation during the formation of both classes of satellites in the protojovian nebula. 相似文献