共查询到20条相似文献，搜索用时 343 毫秒
1.
Based on measurements performed by the Hydrogen Deuterium Absorption Cell (HDAC) aboard the Cassini orbiter, Titan’s atomic hydrogen exosphere is investigated. Data obtained during the T9 encounter are used to infer the distribution of atomic hydrogen throughout Titan’s exosphere, as well as the exospheric temperature.The measurements performed during the flyby are modeled by performing Monte Carlo radiative transfer calculations of solar Lyman-α radiation, which is resonantly scattered on atomic hydrogen in Titan’s exosphere. Two different atomic hydrogen distribution models are applied to determine the best fitting density profile. One model is a static model that uses the Chamberlain formalism to calculate the distribution of atomic hydrogen throughout the exosphere, whereas the second model is a Particle model, which can also be applied to non-Maxwellian velocity distributions.The density distributions provided by both models are able to fit the measurements although both models differ at the exobase: best fitting exobase atomic hydrogen densities of nH = (1.5 ± 0.5) × 104 cm−3 and nH = (7 ± 1) × 104 cm−3 were found using the density distribution provided by both models, respectively. This is based on the fact that during the encounter, HDAC was sensitive to altitudes above about 3000 km, hence well above the exobase at about 1500 km. Above 3000 km, both models produce densities which are comparable, when taking into account the measurement uncertainty.The inferred exobase density using the Chamberlain profile is a factor of about 2.6 lower than the density obtained from Voyager 1 measurements and much lower than the values inferred from current photochemical models. However, when taking into account the higher solar activity during the Voyager flyby, this is consistent with the Voyager measurements. When using the density profile provided by the particle model, the best fitting exobase density is in perfect agreement with the densities inferred by current photochemical models.Furthermore, a best fitting exospheric temperature of atomic hydrogen in the range of TH = (150-175) ± 25 K was obtained when assuming an isothermal exosphere for the calculations. The required exospheric temperature depends on the density distribution chosen. This result is within the temperature range determined by different instruments aboard Cassini. The inferred temperature is close to the critical temperature for atomic hydrogen, above which it can escape hydrodynamically after it diffused through the heavier background gas. 相似文献
2.
Yüksel Karata? 《New Astronomy》2012,17(1):22-33
We study the kinematics of the Galactic thin and thick disk populations using stars from the RAVE survey’s second data release together with distance estimates from Breddels et al. (2010). The velocity distribution exhibits the expected moving groups present in the solar neighborhood. We separate thick and thin disk stars by applying the X (stellar-population) criterion of Schuster et al. (1993), which takes into account both kinematic and metallicity information. For 1906 thin disk and 110 thick disk stars classified in this way, we find a vertical velocity dispersion, mean rotational velocity and mean orbital eccentricity of (σW, 〈VΦ〉, 〈e〉)thin = (18 ± 0.3 km s−1, 223 ± 0.4 km s−1, 0.07 ± 0.07) and (σW, 〈VΦ〉, 〈e〉)thick = (35 ± 2 km s−1, 163 ± 3 km s−1, 0.31 ± 0.16), respectively. From the radial Jeans equation, we derive a thick disk scale length in the range 1.5-2.2 kpc, whose greatest uncertainty lies in the adopted form of the underlying potential. The shape of the orbital eccentricity distribution indicates that the thick disk stars in our sample most likely formed in situ with minor gas-rich mergers and/or radial migration being the most likely cause for their orbits. We further obtain mean metal abundances of 〈[M/H]〉thin = +0.03 ± 0.17, and 〈[M/H]〉thick = −0.51 ± 0.23, in good agreement with previous estimates. We estimate a radial metallicity gradient in the thin disk of −0.07 dex kpc−1, which is larger than predicted by chemical evolution models where the disk grows inside-out from infalling gas. It is, however, consistent with models where significant migration of stars shapes the chemical signature of the disk, implying that radial migration might play at least part of a role in the thick disk’s formation. 相似文献
3.
Nicole J. Rappaport Pierre-Yves Longaretti Richard G. French Colleen A. McGhee 《Icarus》2009,199(1):154-173
Cassini radio science experiments have provided multiple occultation optical depth profiles of Saturn's rings that can be used in combination to analyze density waves. This paper establishes an accurate procedure of inversion of the wave profiles to reconstruct the wave kinematic parameters as a function of semi-major axis, in the nonlinear regime. This procedure is established using simulated data in the presence of realistic noise perturbations, to control the reconstruction error. It is then applied to the Mimas 5:3 density wave. There are two important concepts at the basis of this procedure. The first one is that it uses the nonlinear representation of density waves, and the second one is that it relies on a combination of optical depth profiles instead of just one profile. A related method to analyze density waves was devised by Longaretti and Borderies [Longaretti, P.-Y., Borderies, N., 1986. Icarus 67, 211-223] to study the nonlinear density wave associated with the Mimas 5:3 resonance, but the single photopolarimetric profile provided limited constraints. Other studies of density waves analyzing Cassini data [Colwell, J.E., Esposito, L.W., 2007. Bull. Am. Astron. Soc. 39, 461; Tiscareno, M.S., Burns, J.A., Nicholson, P.D., Hedman, M.M., Porco, C.C., 2007. Icarus 189, 14-34] are based on the linear theory and find inconsistent results from profile to profile. Multiple cuts of the rings are helpful in a fundamental way to ensure the accuracy of the procedure by forcing consistency among the various optical depth profiles. By way of illustration we have applied our procedure to the Mimas 5:3 density wave. We were able to recover precisely the kinematic parameters from the radio experiment occultation data in most of the propagation region; a preliminary analysis of the pressure-corrected dispersion allowed us to determine new but still uncertain values for the opacity (K?0.02 cm2/g) and velocity dispersion of (c0?0.6 cm/s) in the wave region. Our procedure constitutes the first step in our planned analysis of the density waves of Saturn's rings. It is very accurate and efficient in the far-wave region. However, improvements are required within the first wavelength. The ways in which this method can be used to establish diagnostics of ring physics are outlined. 相似文献
4.
New photometry for the eclipsing binary BE Cephei was performed from 2008 to 2011. The light-curve synthesis indicates that it is a marginal-contact binary with a mass ratio of q = 2.340(±0.009) and a degree of contact of f = 6.9%(±2.3%). From the O − C curve, it is discovered that the orbital period changes show a sinusoidal curve superimposed on a downward parabola. The period and semi-amplitude of the cyclic variation are Pmod = 59.26(±0.52) yr and A = 0.d0067(±0.d0010), which may be possibly attributed to light-time effect via the presence of an unseen third body. The long-term period decreases at a rate of dP/dt = −4.84(±0.31) × 10−8 d yr−1, which may result from mass transfer from the more massive component to the less massive one, accompanied by angular momentum loss. With the period decreasing, the degree of contact will increase. Finally, the marginal-contact binary BE Cep may be evolving into a deep-contact configuration. 相似文献
5.
Numerical simulations, based on the core-nucleated accretion model, are presented for the formation of Jupiter at 5.2 AU in three primordial disks with three different assumed values of the surface density of solid particles. The grain opacities in the envelope of the protoplanet are computed using a detailed model that includes settling and coagulation of grains and that incorporates a recalculation of the grain size distribution at each point in time and space. We generally find lower opacities than the 2% of interstellar values used in previous calculations (Hubickyj, O., Bodenheimer, P., Lissauer, J.J. [2005]. Icarus 179, 415-431; Lissauer, J.J., Hubickyj, O., D’Angelo, G., Bodenheimer, P. [2009]. Icarus 199, 338-350). These lower opacities result in more rapid heat loss from and more rapid contraction of the protoplanetary envelope. For a given surface density of solids, the new calculations result in a substantial speedup in formation time as compared with those previous calculations. Formation times are calculated to be 1.0, 1.9, and 4.0 Myr, and solid core masses are found to be 16.8, 8.9, and 4.7 M⊕, for solid surface densities, σ, of 10, 6, and 4 g cm−2, respectively. For σ = 10 and σ = 6 g cm−2, respectively, these formation times are reduced by more than 50% and more than 80% compared with those in a previously published calculation with the old approximation to the opacity. 相似文献
6.
New laboratory spectra of crystalline and amorphous diacetylene ice have been recorded in the range of 7000-500 cm−1 (1.4-20 μm) to aid in the identification of solid diacetylene on Saturn's moon Titan. We have established that amorphous diacetylene ice is stable only at temperatures less than 70±1 K. With respect to observations on Titan, the best approach would be to utilize future space-based telescopes to search for the ν4 (3277/3271 cm−1) in absorption against the reflected light from the sun and the slightly weaker ν8 absorption bands (676/661 cm−1) in absorption against the continuum emission. 相似文献
7.
We analyze density waves in the Cassini Division of Saturn's rings revealed by multiple stellar occultations by Saturn's rings observed with the Cassini Ultraviolet Imaging Spectrograph. The dispersion and damping of density waves provide information on the local ring surface mass density and viscosity. Several waves in the Cassini Division are on gradients in the background optical depth, and we find that the dispersion of the wave reflects a change in the underlying surface mass density. We find that over most of the Cassini Division the ring opacity (the ratio of optical depth to surface mass density) is nearly constant and is ∼5 times higher than the opacity in the A ring where most density waves are found. However, the Cassini Division ramp, a 1100-km-wide, nearly featureless region of low optical depth that connects the Cassini Division to the inner edge of the A ring, has an opacity like that of the A ring and significantly less than that in the rest of the Cassini Division. This is consistent with particles in the ramp originating in the A ring and being transported into the Cassini Division through ballistic transport processes. Damping of the waves in the Cassini Division suggests a vertical thickness of 3–6 m. Using a mean opacity of 0.1 cm2/g we find the mass of the Cassini Division, excluding the ramp, is 3.1×1016 kg while the mass of the Cassini Division ramp, with an opacity of 0.015 cm2/g, is 1.1×1017 kg. Assuming a power-law size distribution for the ring particles, the larger opacity of the main Cassini Division is consistent with the largest ring particles there being ∼5 times smaller than the largest particles in the ramp and A ring. 相似文献
8.
We report the Balmer broad absorption lines (BALs) in the quasar SDSS J2220 + 0109 discovered from the SDSS data, and present a detailed analysis of the peculiar absorption line spectrum, including the He I* multiplet at λλ3189, 3889 arising from the metastable 23s-state helium and the Balmer Hα and Hβ lines from the excited hydrogen H I of n = 2 level, which are rarely seen in quasar spectra, as well as many absorption lines arising from the excited Fe II* of the levels 7 955 cm−1, 13 474 cm−1 and 13 673 cm−1 in the wavelength range 3100∼3300 Å. Ca II H, K absorption line doublets also clearly appear in the SDSS spectrum. All absorption lines show a similar blueshifted velocity structure of Δv ≈ − 1500 ∼ 0 km·s−1 relative to the quasar's systematic redshift determined from the emission lines. Detailed analysis suggests that the Balmer absorption lines should arise from the partially ionized region with a column density of NHI ≈ 1021 cm−2 for an electron density of ne ∼ 106 cm−3; and that the hydrogen n = 2 level may be populated via collisional excitation with Lyα pumping. 相似文献
9.
D. Jacquemart E. Lellouch C. de Bergh N. Lacome M. Tomasko 《Planetary and Space Science》2008,56(5):613-623
Laboratory spectra of methane-nitrogen mixtures have been recorded in the near-infrared range (1.0-1.65 μm) in conditions similar to Titan's near surface, to facilitate the interpretation of the DISR/DLIS (DISR—Descent Imager/Spectral Radiometer) spectra taken during the last phase of the descent of the Huygens Probe, when the surface was illuminated by a surface-science lamp. We used a 0.03 cm−1 spectral resolution, adequate to resolve the lines at high pressure (pN2∼1.5 bar). By comparing the laboratory spectra with synthetic calculations in the well-studied ν2+2ν3 band (7515-7620 cm−1), we determine a methane absorption column density of 178±20 cm atm and a temperature of 118±10 K in our experiment. From this, we derive the methane absorption coefficients over 1.0-1.65 μm with a 0.03 cm−1 sampling, allowing for the extrapolation of the results to any other methane column density under the relevant pressure and temperature conditions. We then revisit the calibration and analysis of the Titan “lamp-on” DLIS spectra. We infer a 5.1±0.8% methane-mixing ratio in the first 25 m of Titan's atmosphere. The CH4 mixing ratio measured 90 s after landing from a distance of 45 cm is found to be 0.92±0.25 times this value, thus showing no post-landing outgassing of methane in excess of ∼20%. Finally, we determine the surface reflectivity as seen between 25 m and 45 cm and find that the 1500 nm absorption band is deeper in the post-landing spectrum as compared to pre-landing. 相似文献
10.
In this study, we present long term photometric variations of the close binary system GO Cyg. Modelling of the system shows that the primary is filling Roche lobe and the secondary of the system is almost filling its Roche lobe. The physical parameters of the system are M1 = 3.0 ± 0.2M⊙, M2 = 1.3 ± 0.1M⊙, R1 = 2.50 ± 0.12R⊙, R2 = 1.75 ± 0.09R⊙, L1 = 64 ± 9L⊙, L2 = 4.9 ± 0.7L⊙, and a = 5.5 ± 0.3R⊙. Our results show that GO Cyg is the most massive system near contact binary (NCB). Analysis of times of the minima shows a sinusoidal variation with a period of 92.3 ± 0.5 yr due to a third body whose mass is less than 2.3M⊙. Finally a period variation rate of −1.4 × 10−9 d/yr has been determined using all available light curves. 相似文献
11.
A V-band nova search was carried out in NGC 3627 with archival Hubble Space Telescope WFPC2 data which was obtained in the period between November 1997 and January 1998. A total of four novae candidates were discovered which corresponds to a global nova rate of R = 83.65 ± 7.58 yr−1. Taking into account the K-band luminosity obtained from 2MASS (Jarrett et al., 2003) yielded a luminosity specific nova rate (LSNR) of νK = 9.60 ± 1.64 novae per year per 1010L⊙,K. Excluding one of the candidates which may be a long-period variable leads to a LSNR of νK = 7.20 ± 1.23 novae per year per 1010L⊙,K. These values are higher than other known nova rates for external galaxies except the Magellanic Clouds. 相似文献
12.
Vladimir A. Krasnopolsky 《Icarus》2010,207(1):17-27
Venus nightglow was observed at NASA IRTF using a high-resolution long-slit spectrograph CSHELL at LT = 21:30 and 4:00 on Venus. Variations of the O2 airglow at 1.27 μm and its rotational temperature are extracted from the observed spectra. The mean O2 nightglow is 0.57 MR at 21:30 at 35°S-35°N, and the temperature increases from 171 K near the equator to ∼200 K at ±35°. We have found a narrow window that covers the OH (1-0) P1(4.5) and (2-1) Q1(1.5) airglow lines. The detected line intensities are converted into the (1-0) and (2-1) band intensities of 7.2 ± 1.8 kR and <1.4 kR at 21:30 and 15.5 ± 2 kR and 4.7 ± 1 kR at 4:00. The f-component of the (1-0) P1(4.5) line has not been detected in either observation, possibly because of resonance quenching in CO2. The observed Earth’s OH (1-0) and (2-1) bands were 400 and 90 kR at 19:30 and 250 and 65 kR at 9:40, respectively. A photochemical model for the nighttime atmosphere at 80-130 km has been made. The model involves 61 reactions of 24 species, including odd hydrogen and chlorine chemistries, with fluxes of O, N, and H at 130 km as input parameters. To fit the OH vibrational distribution observed by VEX, quenching of OH (v > 3) in CO2 only to v ? 2 is assumed. According to the model, the nightside-mean O2 emission of 0.52 MR from the VEX and our observations requires an O flux of 2.9 × 1012 cm−2 s−1 which is 45% of the dayside production above 80 km. This makes questionable the nightside-mean O2 intensities of ∼1 MR from some observations. Bright nightglow patches are not ruled out; however, the mean nightglow is ∼0.5 MR as observed by VEX and supported by the model. The NO nightglow of 425 R needs an N flux of 1.2 × 109 cm−2 s−1, which is close to that from VTGCM at solar minimum. However, the dayside supply of N at solar maximum is half that required to explain the NO nightglow in the PV observations. The limited data on the OH nightglow variations from the VEX and our observations are in reasonable agreement with the model. The calculated intensities and peak altitudes of the O2, NO, and OH nightglow agree with the observations. Relationships for the nightglow intensities as functions of the O, N, and H fluxes are derived. 相似文献
13.
We carried out new observations of the binary asteroid 22 Kalliope (S2/2001) with the Shane 3-m telescope of the Lick observatory in October and November 2001. With a FWHM (full width at half maximum) of 0″.2, Kalliope (apparent size of about 0″.15) was not resolved but it was possible to separate the secondary from its primary whose apparent separation was of the order of 0″.7 with a magnitude difference of 3.22±0.20. As each set of observations spanned a few days of time, they are well distributed along the secondary's orbit, enabling us to accurately estimate its orbit.The satellite orbits 22 Kalliope in a prograde manner with respect to Kalliope's rotational spin (which is in a retrograde sense relative to its orbit around the Sun), on a highly inclined (i=19.8±2.0 with respect to the equator of 22 Kalliope) and moderately eccentric orbit (e=0.07±0.02) with an orbital period of 3.58±0.08 days. The semi-major axis is 1020±40 km. Using Kalliope's diameter as determined from IRAS data, the asteroid's bulk density is about 2.03±0.16 g cm−3, suggestive of a highly porous body with a porosity of 70% considering that the grain density of its meteoritic analog is of ∼7.4 g cm−3. This suggests a rubble pile, rather than solid, body. The measured nodal precession rate of the secondary's orbit seems to be much higher than expected from Kalliope's oblateness, assuming a homogeneous body (constant density). This suggests that Kalliope may be 60% more elongated or 35% larger than presently believed or/and that its internal structure is highly inhomogeneous with a denser outer shell. 相似文献
14.
Dale P. Cruikshank Joshua P. Emery Katherine A. Kornei Emiliano d’Aversa 《Icarus》2010,205(2):516-527
We obtained time-resolved, near-infrared spectra of Io during the 60-90 min following its reappearance from eclipse by Jupiter on five occasions in 2004. The purpose was to search for spectral changes, particularly in the well-known SO2 frost absorption bands, that would indicate surface-atmosphere exchange of gaseous SO2 induced by temperature changes during eclipse. These observations were a follow-on to eclipse spectroscopy observations in which Bellucci et al. [Bellucci et al., 2004. Icarus 172, 141-148] reported significant changes in the strengths of two strong SO2 bands in data acquired with the VIMS instrument aboard the Cassini spacecraft. One of the bands (4.07 μm [ν1 + ν3]) observed by Bellucci et al. is visible from ground-based observatories and is included in our data. We detected no changes in Io’s spectrum at any of the five observed events during the approximately 60-90 min during which spectra were obtained following Io’s emergence from Jupiter’s shadow. The areas of the three strongest SO2 bands in the region 3.5-4.15 μm were measured for each spectrum; the variation of the band areas with time does not exceed that which can be explained by the Io’s few degrees of axial rotation during the intervals of observation, and in no case does the change in band strength approach that seen in the Cassini VIMS data. Our data are of sufficient quality and resolution to show the weak 2.198 μm (4549.6 cm−1) 4ν1 band of SO2 frost on Io for what we believe is the first time. At one of the events (June 22, 2004), we began the acquisition of spectra ∼6 min before Io reappeared from Jupiter’s shadow, during which time it was detected through its own thermal emission. No SO2 bands were superimposed on the purely thermal spectrum on this occasion, suggesting that the upper limit to condensed SO2 in the vertical column above Io’s surface was ∼4 × 10−5 g cm−2. 相似文献
15.
Rate coefficient of the cyanide anion (CN−) with cyanoacetylene (HC3N) reaction, has been studied in gas phase at room temperature using a Flowing Afterglow Langmuir Probe - Mass Spectrometer (FALP-MS) apparatus. The rate constant for the CN− + HC3N reaction is k = 4.8 × 10−9 cm3/s with an uncertainty of 30%. 相似文献
16.
The thermal inertia values of Saturn’s main rings (the A, B, and C rings and the Cassini division) are derived by applying our thermal model to azimuthally scanned spectra taken by the Cassini Composite Infrared Spectrometer (CIRS). Model fits show the thermal inertia of ring particles to be 16, 13, 20, and 11 J m−2 K−1 s−1/2 for the A, B, and C rings, and the Cassini division, respectively. However, there are systematic deviations between modeled and observed temperatures in Saturn’s shadow depending on solar phase angle, and these deviations indicate that the apparent thermal inertia increases with solar phase angle. This dependence is likely to be explained if large slowly spinning particles have lower thermal inertia values than those for small fast spinning particles because the thermal emission of slow rotators is relatively stronger than that of fast rotators at low phase and vise versa. Additional parameter fits, which assume that slow and fast rotators have different thermal inertia values, show the derived thermal inertia values of slow (fast) rotators to be 8 (77), 8 (27), 9 (34), 5 (55) J m−2 K−1 s−1/2 for the A, B, and C rings, and the Cassini division, respectively. The values for fast rotators are still much smaller than those for solid ice with no porosity. Thus, fast rotators are likely to have surface regolith layers, but these may not be as fluffy as those for slow rotators, probably because the capability of holding regolith particles is limited for fast rotators due to the strong centrifugal force on surfaces of fast rotators. Other additional parameter fits, in which radii of fast rotators are varied, indicate that particles less than ∼1 cm should not occupy more than roughly a half of the cross section for the A, B, and C rings. 相似文献
17.
We have completed a series of local N-body simulations of Saturn’s B and A rings in order to identify systematic differences in the degree of particle clumping into self-gravity wakes as a function of orbital distance from Saturn and dynamical optical depth (a function of surface density). These simulations revealed that the normal optical depth of the final configuration can be substantially lower than one would infer from a uniform distribution of particles. Adding more particles to the simulation simply piles more particles onto the self-gravity wakes while leaving relatively clear gaps between the wakes. Estimating the mass from the observed optical depth is therefore a non-linear problem. These simulations may explain why the Cassini UVIS instrument has detected starlight at low incidence angles through regions of the B ring that have average normal optical depths substantially greater than unity at some observation geometries [Colwell, J.E., Esposito, L.W., Srem?evi?, M., Stewart, G.R., McClintock, W.E., 2007. Icarus 190, 127-144]. We provide a plausible internal density of the particles in the A and B rings based upon fitting the results of our simulations with Cassini UVIS stellar occultation data. We simulated Cassini-like occultations through our simulation cells, calculated optical depths, and attempted to extrapolate to the values that Cassini observes. We needed to extrapolate because even initial optical depths of >4 (σ > 240 g cm−2) only yielded final optical depths no greater than 2.8, smaller than the largest measured B ring optical depths. This extrapolation introduces a significant amount of uncertainty, and we chose to be conservative in our overall mass estimates. From our simulations, we infer the surface density of the A ring to be , which corresponds to a mass of . We infer a minimum surface density of for Saturn’s B ring, which corresponds to a minimum mass estimate of . The A ring mass estimate agrees well with previous analyses, while the B ring is at least 40% larger. In sum, our lower limit estimate is that the total mass of Saturn’s ring system is 120-200% the mass of the moon Mimas, but significantly larger values would be plausible given the limitations of our simulations. A significantly larger mass for Saturn’s rings favors a primordial origin for the rings because the disruption of a former satellite of the required mass would be unlikely after the decay of the late heavy bombardment of planetary surfaces. 相似文献
18.
Coagulation models assume a higher sticking threshold for micrometer-sized ice particles than for micrometer-sized silicate particles. However, in contrast to silicates, laboratory investigations of the collision properties of micrometer-sized ice particles (in particular, of the most abundant H2O-ice) have not been conducted yet. Thus, we used two different experimental methods to produce micrometer-sized H2O-ice particles, i.e. by spraying H2O droplets into liquid nitrogen and by spraying H2O droplets into a cold nitrogen atmosphere. The mean particle radii of the ice particles produced with these experimental methods are (1.49 ± 0.79) μm and (1.45 ± 0.65) μm. Ice aggregates composed of the micrometer-sized ice particles are highly porous (volume filling factor: ? = 0.11 ± 0.01) or rather compact (volume filling factor: ? = 0.72 ± 0.04), depending on the method of production. Furthermore, the critical rolling friction force of FRoll,ice = (114.8 ± 23.8) × 10−10 N was measured for micrometer-sized ice particles, which exceeds the critical rolling friction force of micrometer-sized SiO2 particles . This result implies that the adhesive bonding between micrometer-sized ice particles is stronger than the bonding strength between SiO2 particles. An estimation of the specific surface energy of micrometer-sized ice particles, derived from the measured critical rolling friction forces and the surface energy of micrometer-sized SiO2 particles, results in γice = 0.190 J m−2. 相似文献
19.
A chamber was constructed to simulate the boundary between the ice table, regolith and atmosphere of Mars and to examine fractionation between H2O and HDO during sublimation under realistic martian conditions of temperature and pressure. Thirteen experimental runs were conducted with regolith overlying the ice. The thickness and characteristic grain size of the regolith layer as well as the temperature of the underlying ice was varied. From these runs, values for the effective diffusivity, taking into account the effects of adsorption, of the regolith were derived. These effective diffusivities ranged from 1.8 × 10−4 m2 s−1 to 2.2 × 10−3 m2 s−1 for bare ice and from 2.4 × 10−11 m2 s−1 to 2.0 × 10−9 m2 s−1 with an adsorptive layer present. From these, latent heats of adsorption of 8.6 ± 2.6 kJ mol−1 and 9.3 ± 2.8 kJ mol−1 were derived at ice-surface temperatures above 223 ± 8 K and 96 ± 28 kJ mol−1 and 104 ± 31 kJ mol−1 respectively for H2O and HDO were derived at colder temperatures. For temperatures below 223 K, the effective diffusivity of HDO was found to be lower than the diffusivity of H2O by 40% on average, suggesting that the regolith was adsorptively fractionating the sublimating gas with a fractionation factor of 1.96 ± 0.74. Applying these values to Mars predicts that adsorbed water on the regolith is enriched in HDO compared to the atmosphere, particularly where the regolith is colder. Based on current observations, the D/H ratio of the regolith may be as high as 21 ± 8 times VSMOW at 12°S and LS = 357° if the regolith is hydrated primarily by the atmosphere, neglecting any hydration from subsurface ice. 相似文献
20.
In this work we analyze the spatial structure of Jupiter's cloud reflectivity field in order to determine brightness periodicities and power spectra characteristics together with their relationship with Jupiter's dynamics and turbulence. The research is based on images obtained in the near-infrared (∼950 nm), blue (∼430 nm) and near-ultraviolet (∼260 nm) wavelengths with the Hubble Space Telescope in 1995 and the Cassini spacecraft Imaging Science Subsystem in 2000. Zonal reflectivity scans were analyzed by means of spatial periodograms and power spectra. The periodograms have been used to search for waves as a function of latitude. We present the values of the dominant wavenumbers for latitude bands between 32° N and 42° S. The brightness power spectra analysis has been performed in the meridional and zonal directions. The meridional analysis of albedo profiles are close to a k−5 law similarly to the wind profiles at blue and infrared wavelengths, although results differ from that in the ultraviolet. The zonal albedo analysis results in two distributions characterized by different slopes. In the near infrared and blue wavelengths, average spectral slopes are n1=−1.3±0.4 for shorter wavenumbers (k<80), and n2=−2.5±0.7 for greater wavenumbers, whereas for the ultraviolet n1=−1.9±0.4 and n2=−0.7±0.4, possibly showing a different dynamical regime. We find a turning point in the spectra between both regimes at wavenumber k∼80 (corresponding to L∼1000 km) for all wavelengths. 相似文献