Surface complexation modelling of Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) adsorption onto kaolinite     

Xueyuan Gu  Les J. Evans 《Geochimica et cosmochimica acta》2008,72(2):267-276

Proton binding constants for the edge and basal surface sites of kaolinite were determined by batch titration experiments at 25 °C in the presence of 0.1 M, 0.01 M and 0.001 M solutions of NaNO₃ and in the pH range 3-9. By optimizing the results of the titration experiments, the ratio of the edge sites to the basal surface sites was found to be 6:1. The adsorption of Cd(II), Cu(II), Ni(II), Zn(II) and Pb(II) onto kaolinite suspensions was investigated using batch adsorption experiments and results suggested that in the lower pH range the metallic cations were bound through non-specific ion exchange reactions on the permanently charged basal surface sites (X⁻). Adsorption on these sites was greatly affected by ionic strength. With increasing pH, the variable charged edge sites (SOH) became the major adsorption sites and inner-sphere specifically adsorbed monodentate complexes were believed to be formed. The effect of ionic strength on the extent of adsorption of the metals on the variable charged edge sites was much less than those on the permanently charged sites. Two binding constants, log K_(X2Me) and log K_(SOMe), were calculated by optimizing these constants in the computer program FITEQL. A model combining non-specific ion exchange reactions and inner-sphere specific surface complexations was developed to predict the adsorption of heavy metals onto kaolinite in the studied pH range. Linear free energy relationships were found between the edge site binding constants and the first hydrolysis constants of the metals.  相似文献   

Investigation of the different binding edge sites for Zn on montmorillonite using P-EXAFS - The strong/weak site concept in the 2SPNE SC/CE sorption model     

Rainer Dähn  Bart Baeyens  Michael H. Bradbury 《Geochimica et cosmochimica acta》2011,75(18):5154-5168

The 2 site protolysis non electrostatic surface complexation and cation exchange (2SPNE SC/CE) sorption model has been used over the past decade or so to quantitatively describe the uptake of metals with oxidation states from II to VI on 2:1 clay minerals; montmorillonite and illite. One of the main features in this model is that there are two broad categories of amphoteric edge sorption sites; the so called strong (S^SOH) and weak (S^W1OH) sites. Because of their different sorption characteristics, it was expected that the coordination environments of the surface complexes on the two site types would be different. Zn isotherm data on two montmorillonites, Milos and STx-1, were measured and modelled using the 2SPNE SC/CE sorption model. The results were used to define the most favourable experimental conditions under which Zn sorption was either dominated by the strong (S^SOH, ∼2 mmol kg⁻¹) or by the weak sites (S^W1OH, ∼40 mmol kg⁻¹). Highly oriented self-supporting films were prepared for polarised extended X-ray absorption fine structure (P-EXAFS) investigations.Montmorillonites often contain Zn incorporated in the clay matrix. The Zn bound in this form was quantified and the results from the analysis of the P-EXAFS spectra were taken into account in the interpretation of the spectra measured at low Zn loadings (∼2 mmol kg⁻¹) and medium Zn loadings (∼30 mmol kg⁻¹). The Zn spectra on the “strong sites” exhibited a pronounced angular dependency and formed surface complexes in the continuity of the Al-octahedral sheets at the montmorillonite edges. In contrast, the Zn “weak site” spectra showed only a weak angular dependency. The spectroscopic evidence indicates the existence of two distinct groups of edge surface binding sites which is consistent with a multi-site sorption model and in particular with the strong/weak site concept intrinsic to the 2SPNE S/CE sorption model.  相似文献   

Reactive transport of gentisic acid in a hematite-coated sand column: Experimental study and modeling     

K. Hanna  B. Rusch  A. Hofmann 《Geochimica et cosmochimica acta》2010,74(12):3351-4418

The adsorption of gentisic acid (GA) by hematite nano-particles was examined under static and dynamic conditions by conducting batch and column tests. To simulate natural sediments, the iron oxide was deposited on 10 μm quartz particles. The GA adsorption was described by a surface complexation model fitted to pH-adsorption curves with GA concentrations of 0.1-1 mM in a pH range of 3-10. The surface was described with one type of site (FeOH°), while gentisic acid at the surface was described by two surface complexes (FeLH₂°, log K_int = 8.9 and FeLH⁻, log K_int = −8.2). Modeling was conducted with PHREEQC-2 using the MINTEQ database. From a kinetic point of view, the intrinsic chemical reactions were likely to be the rate-limiting step of sorption (∼10⁻³ s⁻¹) while external and internal mass transfer rates (∼10² s⁻¹) were much faster. Under flow through conditions (column), adsorption of GA to hematite-coated sand was about 7-times lower than under turbulent mixing (batch). This difference could not be explained by chemical adsorption kinetics as shown by test calculations run with HYDRUS-1D software. Surface complexation model simulations however successfully described the data when the surface area was adjusted, suggesting that under flow conditions the accessibility to the reactive surface sites was reduced. The exact mechanism responsible for the increased mobility of GA could not be determined but some parameters suggested that decreased external mass transfer between solution and surface may play a significant role under flow through conditions.  相似文献   

Experimental and modelling studies on the pH buffering of MX-80 bentonite porewater     

M.H. Bradbury  B. Baeyens 《Applied Geochemistry》2009

  相似文献   

Copper isotope fractionation during its interaction with soil and aquatic microorganisms and metal oxy(hydr)oxides: Possible structural control   总被引：2，自引：0，他引：2  

O.S. Pokrovsky  J. Viers  E.I. Kompantseva 《Geochimica et cosmochimica acta》2008,72(7):1742-1757

This work is aimed at quantifying the main environmental factors controlling isotope fractionation of Cu during its adsorption from aqueous solutions onto common organic (bacteria, algae) and inorganic (oxy(hydr)oxide) surfaces. Adsorption of Cu on aerobic rhizospheric (Pseudomonas aureofaciens CNMN PsB-03) and phototrophic aquatic (Rhodobacter sp. f-7bl, Gloeocapsa sp. f-6gl) bacteria, uptake of Cu by marine (Skeletonema costatum) and freshwater (Navicula minima, Achnanthidium minutissimum and Melosira varians) diatoms, and Cu adsorption onto goethite (FeOOH) and gibbsite (AlOOH) were studied using a batch reaction as a function of pH, copper concentration in solution and time of exposure. Stable isotopes of copper in selected filtrates were measured using Neptune multicollector ICP-MS. Irreversible incorporation of Cu in cultured diatom cells at pH 7.5-8.0 did not produce any isotopic shift between the cell and solution (Δ^65/63Cu(solid-solution)) within ±0.2‰. Accordingly, no systematic variation was observed during Cu adsorption on anoxygenic phototrophic bacteria (Rhodobacter sp.), cyanobacteria (Gloeocapsa sp.) or soil aerobic exopolysaccharide (EPS)-producing bacteria (P. aureofaciens) in circumneutral pH (4-6.5) and various exposure times (3 min to 48 h): Δ⁶⁵Cu(solid-solution) = 0.0 ± 0.4‰. In contrast, when Cu was adsorbed at pH 1.8-3.5 on the cell surface of soil the bacterium P. aureofacienshaving abundant or poor EPS depending on medium composition, yielded a significant enrichment of the cell surface in the light isotope (Δ⁶⁵Cu (solid-solution) = −1.2 ± 0.5‰). Inorganic reactions of Cu adsorption at pH 4-6 produced the opposite isotopic offset: enrichment of the oxy(hydr)oxide surface in the heavy isotope with Δ⁶⁵Cu(solid-solution) equals 1.0 ± 0.25‰ and 0.78 ± 0.2‰ for gibbsite and goethite, respectively. The last result corroborates the recent works of Mathur et al. [Mathur R., Ruiz J., Titley S., Liermann L., Buss H. and Brantley S. (2005) Cu isotopic fractionation in the supergene environment with and without bacteria. Geochim. Cosmochim. Acta69, 5233-5246] and Balistrieri et al. [Balistrieri L. S., Borrok D. M., Wanty R. B. and Ridley W. I. (2008) Fractionation of Cu and Zn isotopes during adsorption onto amorhous Fe(III) oxyhydroxide: experimental mixing of acid rock drainage and ambient river water. Geochim. Cosmochim. Acta72, 311-328] who reported heavy Cu isotope enrichment onto amorphous ferric oxyhydroxide and on metal hydroxide precipitates on the external membranes of Fe-oxidizing bacteria, respectively.Although measured isotopic fractionation does not correlate with the relative thermodynamic stability of surface complexes, it can be related to their structures as found with available EXAFS data. Indeed, strong, bidentate, inner-sphere complexes presented by tetrahedrally coordinated Cu on metal oxide surfaces are likely to result in enrichment of the heavy isotope on the surface compared to aqueous solution. The outer-sphere, monodentate complex, which is likely to form between Cu²⁺ and surface phosphoryl groups of bacteria in acidic solutions, has a higher number of neighbors and longer bond distances compared to inner-sphere bidentate complexes with carboxyl groups formed on bacterial and diatom surfaces in circumneutral solutions. As a result, in acidic solution, light isotopes become more enriched on bacterial surfaces (as opposed to the surrounding aqueous medium) than they do in neutral solution.Overall, the results of the present study demonstrate important isotopic fractionation of copper in both organic and inorganic systems and provide a firm basis for using Cu isotopes for tracing metal transport in earth-surface aquatic systems. It follows that both adsorption on oxides in a wide range of pH values and adsorption on bacteria in acidic solutions are capable of producing a significant (up to 2.5-3‰ (±0.1-0.15‰)) isotopic offset. At the same time, Cu interaction with common soil and aquatic bacteria, as well as marine and freshwater diatoms, at 4 < pH < 8 yields an isotopic shift of only ±0.2-0.3‰, which is not related to Cu concentration in solution, surface loading, the duration of the experiment, or the type of aquatic microorganisms.  相似文献   

Structure and dynamics of the water films confined between edges of pyrophyllite: A first principle study     

Sergey V. Churakov 《Geochimica et cosmochimica acta》2007,71(5):1130-1144

Edge sites of clay minerals play a key role for pH dependent sorption of ions from solutions of electrolytes. Pyrophyllite, Al₂[Si₄O₁₀](OH)₂, is an important structural prototype for a variety of 2:1 dioctahedral phyllosilicates but in contrast to the other clays has no permanent structural charge. The structure of thin water films confined between most common edges of 1Tc pyrophyllite: (0 1 0), (1 1 0) and (1 0 0), was analyzed by means of ab initio molecular dynamic simulations. The system setup allowed for a full flexibility of the interfaces and a proton exchange between the edges of pyrophyllite and water molecules in solution. The structure of hydrated surfaces is compared with the recent predictions of static geometry optimizations for edge-vacuum interfaces. All surfaces studied reveal a strong hydrophilic character of edge similar to the hydrated silica surface and the facets of simple layered hydroxides. Spontaneous proton transfer between different surface sites were observed in molecular dynamics simulations of the (0 1 0) interface. The proton bound to the SiOH site was found to exchange with the AlOH group by the mechanism . The direction of the proton transfer agrees with the scale of relative proton affinities for surface sites obtained from the static calculations. Alternatively, the proton attached to the AlOH₂ site exchanges with the AlOH group. In both reactions, the protons are transferred through the chains of hydrogen bonds formed between water molecules in the solution and the surface sites. The observed mechanisms might be one of the basic schemes for the surface proton diffusion in compacted clays. Kinetics of the proton transfer at edge sites is limited by the rate of rearrangements of the water molecules near interface.  相似文献   

Influence of pH,soil humic/fulvic acid,ionic strength and foreign ions on sorption of thorium(IV) onto γ-Al₂O₃     

C.L. Chen  X.K. Wang 《Applied Geochemistry》2007

  相似文献   

Sorption modelling on illite Part I: Titration measurements and the sorption of Ni, Co, Eu and Sn     

M.H. Bradbury 《Geochimica et cosmochimica acta》2009,73(4):990-1003

In this study the physico-chemical, titration and sorption characteristics of Na-illite du Puy (Na-illite) have been measured and modelled. Samples of illite, collected in the region of le Puy-en-Velay, France, were purified and conditioned to the Na-form and physico-chemically characterised. Potentiometric titrations on suspensions of the Na-illite were carried out using a batch backtitration technique in 0.01, 0.1 and 0.5 M NaClO₄ background electrolytes from pH∼3 to ∼11.5 in an inert atmosphere glove box. The supernatant solutions from each titration experiment in each series were analysed for K, Mg, Ca, Sr, Si, Al, Fe and Mn. The titration data were modelled in terms of the protolysis of two amphoteric edge sites (S^W1OH and S^W2OH) without an electrostatic term. Sorption edges (solid/liquid distribution ratios versus pH at trace sorbate concentrations and constant ionic strength) were determined for the transitions metals Ni(II) and Co(II), the lanthanide Eu(III), and the heavy metal Sn(IV) on Na-illite with NaClO₄ as the background electrolyte under anoxic conditions (CO₂ ? 2 ppm, O₂ ? 2 ppm). The study thus encompasses a broad range of metals with different thermodynamic characteristics and with valence states ranging from II to IV. The results from the modelling of the titration data, in combination with a non electrostatic surface complexation and cation exchange sorption model were applied to quantitatively describe the uptake characteristics of the metals listed above on Na-illite. Since sorption edges were measured at trace concentrations, metal uptake was modelled as occurring on strong type sites (S^SOH) only. This sorption model, the two site protolysis non electrostatic surface complexation and cation exchange model (2SPNE SC/CE model) had been previously developed and used to describe metal uptake on montmorillonite.  相似文献   

Infrared spectroscopic and X-ray diffraction characterization of the nature of adsorbed arsenate on ferrihydrite   总被引：4，自引：0，他引：4  

Yongfeng Jia  Liying Xu  George P. Demopoulos 《Geochimica et cosmochimica acta》2007,71(7):1643-1654

Fourier transformed infrared (FTIR) spectroscopy was used to characterize arsenate-ferrihydrite sorption solids synthesized at pH 3-8. The speciation of sorbed arsenate was determined based on the As-O stretching vibration bands located at 650-950 cm⁻¹ and O-H stretching vibration bands at 3000-3500 cm⁻¹. The positions of the As-O and O-H stretching vibration bands changed with pH indicating that the nature of surface arsenate species on ferrihydrite was strongly pH dependent. Sorption density and synthesis media (sulfate vs. nitrate) had no appreciable effect. At acidic pH (3, 4), ferric arsenate surface precipitate formed on ferrihydrite and constituted the predominant surface arsenate species. X-ray diffraction (XRD) analyses of he sorption solids synthesized at elevated temperature (75 °C), pH 3 clearly showed the development of crystalline ferric arsenate (i.e. scorodite). In neutral and alkaline media (pH 7, 8), arsenate sorbed as a bidentate surface complex (in both protonated FeO₂As(O)(OH)⁻ and unprotonated forms). For the sorption systems in slightly acidic media (pH 5, 6), both ferric arsenate and surface complex were probably present on ferrihydrite. It was further determined that the incorporated sulfate in ferrihydrite during synthesis was substituted by arsenate and was more easily exchangeable with increasing pH.  相似文献   

Adsorption and surface oxidation of Fe(II) on metal (hydr)oxides     

Tjisse Hiemstra  Willem H. van Riemsdijk 《Geochimica et cosmochimica acta》2007,71(24):5913-5933

The Fe(II) adsorption by non-ferric and ferric (hydr)oxides has been analyzed with surface complexation modeling. The CD model has been used to derive the interfacial distribution of charge. The fitted CD coefficients have been linked to the mechanism of adsorption. The Fe(II) adsorption is discussed for TiO₂, γ-AlOOH (boehmite), γ-FeOOH (lepidocrocite), α-FeOOH (goethite) and HFO (ferrihydrite) in relation to the surface structure and surface sites. One type of surface complex is formed at TiO₂ and γ-AlOOH, i.e. a surface-coordinated Fe²⁺ ion. At the TiO₂ (Degussa) surface, the Fe²⁺ ion is probably bound as a quattro-dentate surface complex. The CD value of Fe²⁺ adsorbed to γ-AlOOH points to the formation of a tridentate complex, which might be a double edge surface complex. The adsorption of Fe(II) to ferric (hydr)oxides differs. The charge distribution points to the transfer of electron charge from the adsorbed Fe(II) to the solid and the subsequent hydrolysis of the ligands that coordinate to the adsorbed ion, formerly present as Fe(II). Analysis shows that the hydrolysis corresponds to the hydrolysis of adsorbed Al(III) for γ-FeOOH and α-FeOOH. In both cases, an adsorbed M(III) is found in agreement with structural considerations. For lepidocrocite, the experimental data point to a process with a complete surface oxidation while for goethite and also HFO, data can be explained assuming a combination of Fe(II) adsorption with and without electron transfer. Surface oxidation (electron transfer), leading to adsorbed Fe(III)(OH)₂, is favored at high pH (pH > ∼7.5) promoting the deprotonation of two Fe_III-OH₂ ligands. For goethite, the interaction of Fe(II) with As(III) and vice versa has been modeled too. To explain Fe(II)-As(III) dual-sorbate systems, formation of a ternary type of surface complex is included, which is supposed to be a monodentate As(III) surface complex that interacts with an Fe(II) ion, resulting in a binuclear bidentate As(III) surface complex.  相似文献   

Hydrated goethite (α-FeOOH) (1 0 0) interface structure: Ordered water and surface functional groups     

Sanjit K. Ghose  Glenn A. Waychunas  Peter J. Eng 《Geochimica et cosmochimica acta》2010,74(7):1943-2587

Goethite(α-FeOOH), an abundant and highly reactive iron oxyhydroxide mineral, has been the subject of numerous studies of environmental interface reactivity. However, such studies have been hampered by the lack of experimental constraints on aqueous interface structure, and especially of the surface water molecular arrangements. Structural information of this type is crucial because reactivity is dictated by the nature of the surface functional groups and the structure or distribution of water and electrolyte at the solid-solution interface. In this study we have investigated the goethite (1 0 0) surface using surface diffraction techniques, and have determined the relaxed surface structure, the surface functional groups, and the three dimensional nature of two distinct sorbed water layers. The crystal truncation rod (CTR) results show that the interface structure consists of a double hydroxyl, double water terminated interface with significant atom relaxations. Further, the double hydroxyl terminated surface dominates with an 89% contribution having a chiral subdomain structure on the (1 0 0) cleavage faces. The proposed interface stoichiometry is ((H₂O)(H₂O)OH₂OHFeOOFeR) with two types of terminal hydroxyls; a bidentate (B-type) hydroxo group and a monodentate (A-type) aquo group. Using the bond-valence approach the protonation states of the terminal hydroxyls are predicted to be OH type (bidentate hydroxyl with oxygen coupled to two Fe³⁺ ions) and OH₂ type (monodentate hydroxyl with oxygen tied to only one Fe³⁺). A double layer three dimensional ordered water structure at the interface was determined from refinement of fits to the experimental data. Application of bond-valence constraints to the terminal hydroxyls with appropriate rotation of the water dipole moments allowed a plausible dipole orientation model as predicted. The structural results are discussed in terms of protonation and H-bonding at the interface, and the results provide an ideal basis for testing theoretical predictions of characteristic surface properties such as pK_a , sorption equilibria, and surface water permittivity.  相似文献   

Solution behavior of reduced COH volatiles in silicate melts at high pressure and temperature     

Bjorn O. Mysen  Marilyn L. Fogel  George D. Cody 《Geochimica et cosmochimica acta》2009,73(6):1696-6003

The solubility and solution mechanisms of reduced COH volatiles in Na₂OSiO₂ melts in equilibrium with a (H₂ + CH₄) fluid at the hydrogen fugacity defined by the iron-wüstite + H₂O buffer [f_H2(IW)] have been determined as a function of pressure (1-2.5 GPa) and silicate melt polymerization (NBO/Si: nonbridging oxygen per silicon) at 1400 °C. The solubility, calculated as CH₄, increases from ∼0.2 wt% to ∼0.5 wt% in the melt NBO/Si-range ∼0.4 to ∼1.0. The solubility is not significantly pressure-dependent, probably because f_H2(IW) in the 1-2.5 GPa range does not vary greatly with pressure. Carbon isotope fractionation between methane-saturated melts and (H₂ + CH₄) fluid varied by ∼14‰ in the NBO/Si-range of these melts.The (C..H) and (O..H) speciation in the quenched melts was determined with Raman and ¹H MAS NMR spectroscopy. The dominant (C..H)-bearing complexes are molecular methane, CH₄, and a complex or functional group that includes entities with CCH bonding. Minor abundance of complexes that include SiOCH₃ bonding is tentatively identified in some melts. There is no spectroscopic evidence for SiC or SiCH₃. Raman spectra indicate silicate melt depolymerization (increasing NBO/Si). The [CH₄/CCH]^melt abundance ratio is positively correlated with NBO/Si, which is interpreted to suggest that the (CCH)-containing structural entity is bonded to the silicate melt network structure via its nonbridging oxygen. The ∼14‰ carbon isotope fractionation change between fluid and melt is because of the speciation changes of carbon in the melt.  相似文献   

Uranyl adsorption and surface speciation at the imogolite-water interface: Self-consistent spectroscopic and surface complexation models   总被引：1，自引：0，他引：1  

Yuji Arai  M. McBeath  J. Joye 《Geochimica et cosmochimica acta》2006,70(10):2492-2509

Macro- and molecular-scale knowledge of uranyl (U(VI)) partitioning reactions with soil/sediment mineral components is important in predicting U(VI) transport processes in the vadose zone and aquifers. In this study, U(VI) reactivity and surface speciation on a poorly crystalline aluminosilicate mineral, synthetic imogolite, were investigated using batch adsorption experiments, X-ray absorption spectroscopy (XAS), and surface complexation modeling. U(VI) uptake on imogolite surfaces was greatest at pH ∼7-8 (I = 0.1 M NaNO₃ solution, suspension density = 0.4 g/L [U(VI)]_i = 0.01-30 μM, equilibration with air). Uranyl uptake decreased with increasing sodium nitrate concentration in the range from 0.02 to 0.5 M. XAS analyses show that two U(VI) inner-sphere (bidentate mononuclear coordination on outer-wall aluminol groups) and one outer-sphere surface species are present on the imogolite surface, and the distribution of the surface species is pH dependent. At pH 8.8, bis-carbonato inner-sphere and tris-carbonato outer-sphere surface species are present. At pH 7, bis- and non-carbonato inner-sphere surface species co-exist, and the fraction of bis-carbonato species increases slightly with increasing I (0.1-0.5 M). At pH 5.3, U(VI) non-carbonato bidentate mononuclear surface species predominate (69%). A triple layer surface complexation model was developed with surface species that are consistent with the XAS analyses and macroscopic adsorption data. The proton stoichiometry of surface reactions was determined from both the pH dependence of U(VI) adsorption data in pH regions of surface species predominance and from bond-valence calculations. The bis-carbonato species required a distribution of surface charge between the surface and β charge planes in order to be consistent with both the spectroscopic and macroscopic adsorption data. This research indicates that U(VI)-carbonato ternary species on poorly crystalline aluminosilicate mineral surfaces may be important in controlling U(VI) mobility in low-temperature geochemical environments over a wide pH range (∼5-9), even at the partial pressure of carbon dioxide of ambient air (p_CO2 = 10^−3.45 atm).  相似文献   

Surface complexation model for multisite adsorption of copper(II) onto kaolinite     

Caroline L. Peacock 《Geochimica et cosmochimica acta》2005,69(15):3733-3745

We measured the adsorption of Cu(II) onto kaolinite from pH 3-7 at constant ionic strength. EXAFS spectra show that Cu(II) adsorbs as (CuO₄H_n)ⁿ⁻⁶ and binuclear (Cu₂O₆H_n)ⁿ⁻⁸ inner-sphere complexes on variable-charge ≡AlOH sites and as Cu²⁺ on ion exchangeable ≡X--H⁺ sites. Sorption isotherms and EXAFS spectra show that surface precipitates have not formed at least up to pH 6.5. Inner-sphere complexes are bound to the kaolinite surface by corner-sharing with two or three edge-sharing Al(O,OH)₆ polyhedra. Our interpretation of the EXAFS data are supported by ab initio (density functional theory) geometries of analog clusters simulating Cu complexes on the {110} and {010} crystal edges and at the ditrigonal cavity sites on the {001}. Having identified the bidentate (≡AlOH)₂Cu(OH)₂⁰, tridentate (≡Al₃O(OH)₂)Cu₂(OH)₃⁰ and ≡X--Cu²⁺ surface complexes, the experimental copper(II) adsorption data can be fit to the reactions