共查询到20条相似文献，搜索用时 301 毫秒
1.
The enthalpy of formation of andradite (Ca3Fe2Si3O12) has been estimated as-5,769.700 (±5) kJ/mol from a consideration of the calorimetric data on entropy (316.4 J/mol K) and of the experimental phaseequilibrium data on the reactions: 1 $$\begin{gathered} 9/2 CaFeSi_2 O_6 + O_2 = 3/2 Ca_3 Fe_2 Si_3 O_{12} + 1/2 Fe_3 O_4 + 9/2 SiO_2 (a) \hfill \\ Hedenbergite andradite magnetite quartz \hfill \\ \end{gathered} $$ 1 $$\begin{gathered} 4 CaFeSi_2 O_6 + 2 CaSiO_3 + O_2 = 2 Ca_3 Fe_2 Si_3 O_{12} + 4 SiO_2 (b) \hfill \\ Hedenbergite wollastonite andradite quartz \hfill \\ \end{gathered} $$ 1 $$\begin{gathered} 18 CaSiO_3 + 4 Fe_3 O_4 + O_2 = 6Ca_3 Fe_2 Si_3 O_{12} (c) \hfill \\ Wollastonite magnetite andradite \hfill \\ \end{gathered} $$ 1 $$\begin{gathered} Ca_3 Fe_2 Si_3 O_{12} = 3 CaSiO_3 + Fe_2 O_3 . (d) \hfill \\ Andradite pseudowollastonite hematite \hfill \\ \end{gathered} $$ and $$log f_{O_2 } = E + A + B/T + D(P - 1)/T + C log f_{O_2 } .$$ Oxygen-barometric scales are presented as follows: $$\begin{gathered} E = 12.51; D = 0.078; \hfill \\ A = 3 log X_{Ad} - 4.5 log X_{Hd} ; C = 0; \hfill \\ B = - 27,576 - 1,007(1 - X_{Ad} )^2 - 1,476(1 - X_{Hd} )^2 . \hfill \\ \end{gathered} $$ For the assemblage andradite (Ad)-hedenbergite (Hd)-magnetite-quartz: $$\begin{gathered} E = 13.98; D = 0.0081; \hfill \\ A = 4 log(X_{Ad} / X_{Hd} ); C = 0; \hfill \\ B = - 29,161 - 1,342.8(1 - X_{Ad} )^2 - 1,312(1 - X_{Hd} )^2 . \hfill \\ \end{gathered} $$ For the assemblage andradite-hedenbergite-wollastonite-quartz: 1 $$\begin{gathered} E = 13.98;{\text{ }}D = 0.0081; \hfill \\ A = 4\log (X_{Ad} /X_{Hd} );{\text{ C = 0;}} \hfill \\ B = - 29,161 - 1,342.8(1 - X_{Ad} )^2 - 1,312(1 - X_{Hd} )^2 . \hfill \\ \end{gathered} $$ For the assemblage andradite-hedenbergite-calcitequartz: 1 $$\begin{gathered} E = - 1.69;{\text{ }}D = - 0.199; \hfill \\ A = 4\log (X_{Ad} /X_{Hd} );{\text{ C = 2;}} \hfill \\ B = - 20,441 - 1,342.8(1 - X_{Ad} )^2 - 1,312(1 - X_{Hd} )^2 . \hfill \\ \end{gathered} $$ For the assemblage andradite-hedenbergite-wollastonite-calcite: 1 $$\begin{gathered} E = - 17.36;{\text{ }}D = - 0.403; \hfill \\ A = 4\log (X_{Ad} /X_{Hd} );{\text{ C = 4;}} \hfill \\ B = - 11,720 - 1,342.8(1 - X_{Ad} )^2 - 1,312(1 - X_{Hd} )^2 \hfill \\ \end{gathered} $$ The oxygen fugacity of formation of those skarns where andradite and hedenbergite assemblage is typical can be calculated by using the above equations. The oxygen fugacity of formation of this kind of skarn ranges between carbon dioxide/graphite and hematite/magnetite buffers. It increases from the inside zones to the outside zones, and appears to decrease with the ore-types in the order Cu, Pb?Zn, Fe, Mo, W(Sn) ore deposits. 相似文献
2.
Ephesite, Na(LiAl2) [Al2Si2O10] (OH)2, has been synthesized for the first time by hydrothermal treatment of a gel of requisite composition at 300≦T(° C)≦700 and \(P_{H_2 O}\) upto 35 kbar. At \(P_{H_2 O}\) between 7 and 35 kbar and above 500° C, only the 2M1 polytype is obtained. At lower temperatures and pressures, the 1M polytype crystallizes first, which then inverts to the 2M1 polytype with increasing run duration. The X-ray diffraction patterns of the 1M and 2M1 poly types can be indexed unambiguously on the basis of the space groups C2 and Cc, respectively. At its upper thermal stability limit, 2M1 ephesite decomposes according to the reaction (1) $$\begin{gathered} {\text{Na(LiAl}}_{\text{2}} {\text{) [Al}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{{\text{10}}} {\text{] (OH)}}_{\text{2}} \hfill \\ {\text{ephesite}} \hfill \\ {\text{ = Na[AlSiO}}_{\text{4}} {\text{] + LiAl[SiO}}_{\text{4}} {\text{] + }}\alpha {\text{ - Al}}_{\text{2}} {\text{O}}_{\text{3}} {\text{ + H}}_{\text{2}} {\text{O}} \hfill \\ {\text{nepheline }}\alpha {\text{ - eucryptite corundum}} \hfill \\ \end{gathered}$$ Five reversal brackets for (1) have been established experimentally in the temperature range 590–750° C, at \(P_{H_2 O}\) between 400 and 2500 bars. The equilibrium constant, K, for this reaction may be expressed as (2) $$log K{\text{ = }}log f_{{\text{H}}_{\text{2}} O}^* = 7.5217 - 4388/T + 0.0234 (P - 1)T$$ where \(f_{H_2 O}^* = f_{H_2 O} (P,T)/f_{H_2 O}^0\) (1,T), with T given in degrees K, and P in bars. Combining these experimental data with known thermodynamic properties of the decomposition products in (1), the following standard state (1 bar, 298.15 K) thermodynamic data for ephesite were calculated: H f,298.15 0 =-6237372 J/mol, S 298.15 0 =300.455 J/K·mol, G 298.15 0 =-5851994 J/mol, and V 298.15 0 =13.1468 J/bar·mol. 相似文献
3.
Oxygen isotope fractionation between rutile and water 总被引：1，自引：0，他引：1
Synthetic rutile-water fractionations (1000 ln α) at 775, 675, and 575° C were found to be ?2.8, ?3.5, and ?4.8, respectively. Partial exchange experiments with natural rutile at 575° C and with synthetic rutile at 475° C failed to yield reliable fractionations. Isotopic fractionation within the range 575–775° C may be expressed as follows: 1 $$1000\ln \alpha ({\rm T}i{\rm O}_{2 } - H_2 O) = - 4.1 \frac{{10^6 }}{{T_{k^2 } }} + 0.96$$ . Combined with previously determined quartz-water fractionations, the above data permit calibration of the quartz-rutile geothermometer: 1 $$1000\ln \alpha ({\text{S}}i{\rm O}_{2 } - Ti{\rm O}_{2 } ) = 6.6 \frac{{10^6 }}{{T_{k^2 } }} - 2.9$$ . When applied to B-type eclogites from Europe, as an example, the latter equation yields a mean equilibration temperature of 565° C. 相似文献
4.
A great wealth of analytical data for fluid inclusions in minerals indicate that the major species of gases in fluid inclusions are H2O, CO2, CO, CH4, H2 and O2. Three basic chemical reactions are supposed to prevail in rock-forming and ore-forming fluids: $$\begin{gathered} H_2 + 1/2{\text{ O}}_{\text{2}} = H_2 O, \hfill \\ CO + 1/2{\text{ O}}_{\text{2}} = CO_2 , \hfill \\ CH_4 + 2{\text{O}}_{\text{2}} = CO_2 + 2H_2 O, \hfill \\ \end{gathered} $$ and equilibria are reached among them. \(\lg f_{O_2 } - T,{\text{ }}\lg f_{CO_2 } - T\) and Eh-T charts for petrogenesis and minerogenesis in the supercritical state have been plotted under different pressures. On the basis of these charts \(f_{O^2 } ,{\text{ }}f_{CO_2 } \) , Eh, equilibrium temperature and equilibrium pressure can be readily calculated. In this paper some examples are presented to show their successful application in the study of the ore-forming environments of ore deposits. 相似文献
5.
Thomas Reinecke 《Contributions to Mineralogy and Petrology》1986,93(1):56-76
Piemontite- and thulite-bearing assemblages from highly oxidized metapelitic and metacalcareous schists associated with braunite quartzites at Vitali, Andros island, Greece, were chemically investigated. The Mn-rich metasediments are intercalated in a series of metapelitic quartzose schists, marbles, and basic metavolcanites which were affected by a regional metamorphism of the highP/T type (T=400–500° C,P>9 kb) and a later Barrovian-type greenschist metamorphism (T=400–500° C,P～-5–6 kb). Texturally and chemically two generations of piemontite (I and II) can be distinguished which may show complex compositional zoning. Piemontite I coexisted at highP/T conditions with braunite, manganian phengite (alurgite), Mn3+-Mn2+-bearing Na-pyroxene (violan), carbonate, quartz, hollandite, and hematite. Zoned grains generally exhibit a decreasing Mn3+ and an increasing Fe3+ and Al content towards the rim. Chemical compositions of piemontite I range from 2.0 to 32.1 mole % Mn3+, 0 to 25.6 mole % Fe3+, and 60.2 to 81.2 mole % Al. Up to 12.5 mole % Ca on the A(2) site can be substituted by Sr. Piemontites formed in contact or close to braunite (±hematite) attained maximum (Mn3++Fe3+)Al?1 substitution corrresponding to about 33 mole % Mn3++Fe3+ in lowiron compositions and up to about 39 mole % Mn3++ Fe3+ at intermediate Fe3+/(Fe3++Mn3+) ratios. Piemontite II which discontinuously overgrows piemontite I or occurs as separate grains may have been formed by greenschist facies decomposition of manganian Na-pyroxenes according to the reaction: (1) $$\begin{gathered} {\text{Mn}}^{{\text{3 + }}} - Mn^{2 + } - bearing omphacite/chloromelanite \hfill \\ + CO_2 + H_2 O + HCl \pm hermatite \hfill \\ = piemontite + tremolite + albite + chlorite \hfill \\ + calcite + quartz + NaCl \pm O_2 . \hfill \\ \end{gathered} $$ Thulites crystallized in coexistence with Al-rich piemontite II. All thulites analysed are low-Fe3+ manganian orthozoisites with Mntot～-Mn3+ substituting for Al on the M(3) site. Their compositions range from 2.9 to 7.2 mole % Mn3+, 0 to 1.2 mole % Fe3+, and 91.8 to 96.7 mole % Al. Piemontites II in thulite-bearing assemblages range from 5.8 to 15.9 mole % Mn3+, 0 to 3.7 mole % Fe3+, and 83.7 to 93.6 mole % Al. By contrast, piemontites II in thulite-free assemblages are similarly enriched in Mn3+ + Fe3+ — and partially in Sr2+ — as core compositions of piemontite I (21.1 to 29.6 mole % Mn3+, 2.0 to 16.5 mole % Fe3+, 60.6 to 68.4 mole % Al, 0 to 29.4 mole % Sr in the A(2) site). The analytical data presented in this paper document for the first time a continuous low-Fe3+ piemontite solid solution series from 5.8 to 32.1 mole % Mn3+. Aluminous piemontite II is enriched by about 3 mole % Mn3++Fe3+ relative to coexisting thulite in Fe3+-poor samples and by about 6 mole % Mn3++Fe3+ in more Fe3+-rich samples. Mineral pairs from different samples form a continuous compositional loop. Compositional shift of mineral pairs is attributed to the effect of a variable fluid composition at constantP fluid andT on the continuous reaction: (2) $$\begin{gathered} piemontite + CO_2 \hfill \\ = thulite + calcite + quartz \hfill \\ + Mn^{2 + } Ca_{ - 1} [calcite] + H{_2} O + O{_2} \hfill \\ \end{gathered} $$ Further evidence for a variable \(x_{H_2 O} \) and/or \(f_{O_2 } \) possibly resulting from fluid infiltration and local buffering during the greenschist metamorphism is derived from the local decomposition of piemontite, braunite, and rutile to form spessartine, calcite, titanite, and hematite by the reactions: (3) $$\begin{gathered} piemontite + braunite + CO_2 \hfill \\ = sperssartine + calcite + quartz \pm hermatite \hfill \\ + H{_2} O + O{_2} \hfill \\ \end{gathered} $$ and more rarely: (4) $$\begin{gathered} piemontite + quartz + rutile + braunite \hfill \\ = spessartine + titanite + hematite + H{_2} O + O{_2} . \hfill \\ \end{gathered} $$ 相似文献
6.
The Gibbs free energy and volume changes attendant upon hydration of cordierites in the system magnesian cordierite-water have been extracted from the published high pressure experimental data at \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) =P total, assuming an ideal one site model for H2O in cordierite. Incorporating the dependence of ΔG and ΔV on temperature, which was found to be linear within the experimental conditions of 500°–1,000°C and 1–10,000 bars, the relation between the water content of cordierite and P, T and \(f_{{\text{H}}_{\text{2}} {\text{O}}} \) has been formulated as $$\begin{gathered} X_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{crd}}} = \hfill \\ \frac{{f_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{P, T}}} }}{{\left[ {{\text{exp}}\frac{1}{{RT}}\left\{ {64,775 - 32.26T + G_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{1, }}T} - P\left( {9 \times 10^{ - 4} T - 0.5142} \right)} \right\}} \right] + f_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{P, T}}} }} \hfill \\ \end{gathered} $$ The equation can be used to compute H2O in cordierites at \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) <1. Our results at different P, T and partial pressure of water, assuming ideal mixing of H2O and CO2 in the vapour phase, are in very good agreement with the experimental data of Johannes and Schreyer (1977, 1981). Applying the formulation to determine \(X_{{\text{H}}_{\text{2}} {\text{O}}}^{{\text{crd}}} \) in the garnet-cordierite-sillimanite-plagioclase-quartz granulites of Finnish Lapland as a test case, good agreement with the gravimetrically determined water contents of cordierite was obtained. Pressure estimates, from a thermodynamic modelling of the Fe-cordierite — almandine — sillimanite — quartz equilibrium at \(P_{{\text{H}}_{\text{2}} {\text{O}}} = 0\) and \(P_{{\text{H}}_{\text{2}} {\text{O}}} \) =Ptotal, for assemblages from South India, Scottish Caledonides, Daly Bay and Hara Lake areas are compatible with those derived from the garnetplagioclase-sillimanite-quartz geobarometer. 相似文献
7.
The equilibrium position of the reaction $$\begin{gathered} 1.5 KAlSi_3 O_8 + HCl = 0.5 KAl_3 Si_3 O_{10} (OH)_2 \hfill \\ + 3SiO_2 + KCl \hfill \\ \end{gathered} $$ has been located at 1 and 2 kb pressure and temperatures between 600° and 670° C using the Ag-AgCl buffer. These data can be combined with information on the dissociation of KC1, HC1 and H2O to determine species abundances in supercritical aqueous fluids in equilibrium with muscovite — K-feldspar — quartz assemblages. Chloride species become increasingly associated with increasingT, increasing total molality, (m tot or \(m_{Cl_{tot} } \) ), and decreasing \(P_{H_2 O} \) . Master variable diagrams indicate that the pH of the solutions may vary from near neutral to quite acid. Published data on the paragonite-albite-quartz reaction and exchange reactions involving feldspars and micas were included to calculate speciation in mica-feldspar-NaCl-KCl-HCl-H2O fluids at 2kb pressure and temperatures between 300° and 600° C. The data are not accurate enough to distinguish different feldspar structural states. Concentration gradients were calculated for individual species between K-feldspar+quartz, muscovite+quartz and andalusite+quartz assemblages at 500° C, 2 kb. Assuming that the proton diffuses most rapidly and that there are no [H+] gradients, the molality of the solution must vary 30-fold, with feldspar+quartz at the more concentrated side. The data on mica-feldspar-chloride equilibria are used to interpret the spacial distribution of micas, feldspar and quartz in microfolds. This distribution can be accounted for by pressure solution, due to the fact that non-hydrostatic pressure affects congruently dissolving minerals, auch as quartz, differently from minerals which dissolve incongruently, such as micas and feldspars. We postulate, that during folding at constant \(P_{H_2 O} \) ,T and \(m_{Cl - } \) , gradients in KC1 and SiO2 are created by stress differences between hinge and limb of a microfold, such that both migrate to the hinge area where quartz precipitates and muscovite is converted to K-felspar, thus accounting for the observed mineral distribution. 相似文献
8.
Jonathan D. Blundy Timothy J. B. Holland 《Contributions to Mineralogy and Petrology》1990,104(2):208-224
There is currently a dearth of reliable thermobarometers for many hornblende and plagioclase-bearing rocks such as granitoids and amphibolites. A semi-empirical thermodynamic evaluation of the available experimental data on amphibole+plagioclase assemblages leads to a new thermometer based on the Aliv content of amphibole coexisting with plagioclase in silica saturated rocks. The principal exchange vector in amphiboles as a function of temperature in both the natural and experimental studies is \(\left( {Na\square _{ - 1} } \right)^A \left( {AlSi_{ - 1} } \right)^{T1}\) . We have analysed the data using 3 different amphibole activity models to calibrate the thermometer reactions 1. $$1. Edenite + 4 Quartz = Tremolite + Albite$$ 2. $$2. Pargasite + 4 Quartz = Hornblende + Albite.$$ The equilibrium relation for both (1) and (2) leads to the proposed new thermometer $$T = \frac{{0.677P - 48.98 + Y}}{{ - 0.0429 - 0.008314 ln K}} and K = \left( {\frac{{Si - 4}}{{8 - Si}}} \right)X_{Ab}^{Plag} ,$$ where Si is the number of atoms per formula unit in amphiboles, with P in kbar and T in K; the term Y represents plagioclase non-ideality, RTlnγab, from Darken's Quadratic formalism (DQF) with Y=0 for X ab>0.5 and Y=-8.06+25.5(1-X ab)2 for X ab<0.5. The best fits to the data were obtained by assuming complete coupling between Al on the T1 site and Na in the A site of amphibole, and the standard deviation of residuals in the fit is ±38°C. The thermometer is robust to ferric iron recalculation procedures from electron probe data and should yield temperatures of equilibration for hornblende-plagioclase assemblages with uncertainties of around ±75° C for rocks equilibrated at temperatures in the range 500°–1100° C. The thermometer should only be used in this temperature range and for assemblages with plagioclase less calcic than An92 and with amphiboles containing less than 7.8 Si atoms pfu. Good results have been attained on natural examples from greenschist to granulite facies metamorphic rocks as well as from a variety of mafic to acid intrusive and extrusive igneous rocks. Our analysis shows that the pressure dependence is poorly constrained and the equilibria are not suitable for barometry. 相似文献
9.
T. L. Grove 《Contributions to Mineralogy and Petrology》1982,78(3):298-304
Theoretical and practical considerations are combined to place limits on the iron content of an FePt alloy that is in equilibrium with silicate melt, olivine and a gas phase of known \(f_{{\text{O}}_{\text{2}} }\) . Equilibrium constants are calculated for the reactions: (1) $$2{\text{Fe}}^{\text{o}} + {\text{SiO}}_{\text{2}} + {\text{O}}_{\text{2}} \rightleftharpoons {\text{Fe}}_{\text{2}} {\text{SiO}}_{\text{4}}$$ (2) $${\text{Fe}}^{\text{o}} + \frac{1}{2}{\text{O}}_{\text{2}} \rightleftharpoons {\text{FeO}}$$ . These equilibria may be used to choose an appropriate iron activity for the FePt alloy of an experiment. The temperature dependence of the equilibrium constants is calculated from experimental data. The Gibbs free energy of reaction (1) obtained using thermochemical data is in close agreement with ΔGrxn calculated from the experimental data. Reaction (1) has the advantage that it is independent of the Fe2+/Fe3+ ratio of the melt, but is limited to applications where olivine is a crystallizing phase and requires a formulation for \(a_{{\text{SiO}}_{\text{2}} }^{{\text{liq}}}\) . Reaction (2) uses an empirical approximation for the FeO/Fe2O3 ratio of the liquid, and is independent of olivine saturation. However, it requires a formulation for a FeO liq . Either equilibrium constant may be used to calculate the appropriate FePt alloy in equilibrium with a silicate melt. If experiments are conducted at an \(f_{{\text{O}}_{\text{2}} }\) parallel that of a buffer assemblage, a small range of FePt alloys may be used over a large temperature interval. For example, an alloy containing from 6 % to 9 % Fe by weight is in equilibrium with olivine-saturated tholeiites and komatiites at the quartzfayalite-magnetite buffer over the temperature interval 1,400° C to 1,100° C. Lunar basalt liquids in equilibrium with olivine at 1/2 log unit below the iron-wüstite buffer require an FePt alloy that contains 30–50 wt. % iron over a similar temperature interval. 相似文献
10.
Boron is known to interact with a wide variety of protonated ligands(HL) creating complexes of the form B(OH)2L-.Investigation of the interaction of boric acid and bicarbonate in aqueoussolution can be interpreted in terms of the equilibrium $B(OH)_3^0 + HCO_3^ - \rightleftharpoons B(OH)_2 CO_3^ - + H_2 O$ The formation constant for this reaction at 25 °C and 0.7 molkg-1 ionic strength is $K_{BC} = \left[ {B(OH)_2 CO_3^ - } \right]\left[ {B(OH)_3^0 } \right]^{ - 1} \left[ {HCO_3^ - } \right]^{ - 1} = 2.6 \pm 1.7$ where brackets represent the total concentration of each indicatedspecies. This formation constant indicates that theB(OH)2 $CO_3^ - $ concentration inseawater at 25 °C is on the order of 2 μmol kg-1. Dueto the presence of B(OH)2 $CO_3^ - $ , theboric acid dissociation constant ( $K\prime _B $ ) in natural seawaterdiffers from $K\prime _B $ determined in the absence of bicarbonate byapproximately 0.5%. Similarly, the dissociation constants of carbonicacid and bicarbonate in natural seawater differ from dissociation constantsdetermined in the absence of boric acid by about 0.1%. Thesedifferences, although small, are systematic and exert observable influenceson equilibrium predictions relating CO2 fugacity, pH, totalcarbon and alkalinity in seawater. 相似文献
11.
The system Fe-Si-O: Oxygen buffer calibrations to 1,500K 总被引：1，自引：0，他引：1
The five solid-phase oxygen buffers of the system Fe-Si-O, iron-wuestite (IW), wuestite-magnetite (WM), magnetite-hematite (MH), quartz-iron-fayalite (QIF) and fayalite-magnetite-quartz (FMQ) have been recalibrated at 1 atm pressure and temperatures from 800°–1,300° C, using a thermogravimetric gas mixing furnace. The oxygen fugacity, \(f_{{\text{O}}_{\text{2}} }\) was measured with a CaO-doped ZrO2 electrode. Measurements were made also for wuestite solid solutions in order to determine the redox behavior of wuestites with O/Fe ratios varying from 1.05 to 1.17. For FMQ, additional determinations were carried out at 1 kb over a temperature range of 600° to 800° C, using a modified Shaw membrane. Results agree reasonably well with published data and extrapolations. The reaction parameters K, ΔG r o , ΔH r o , and ΔS r o were calculated from the following log \(f_{{\text{O}}_{\text{2}} }\) /T relations (T in K): $$\begin{gathered} {\text{IW }}\log f_{{\text{O}}_{\text{2}} } = - 26,834.7/T + 6.471\left( { \pm 0.058} \right) \hfill \\ {\text{ }}\left( {{\text{800}} - 1,260{\text{ C}}} \right), \hfill \\ {\text{WM }}\log f_{{\text{O}}_{\text{2}} } = - 36,951.3/T + 16.092\left( { \pm 0.045} \right) \hfill \\ {\text{ }}\left( {{\text{1,000}} - 1,300{\text{ C}}} \right), \hfill \\ {\text{MH }}\log f_{{\text{O}}_{\text{2}} } = - 23,847.6/T + 13.480\left( { \pm 0.055} \right) \hfill \\ {\text{ }}\left( {{\text{1,040}} - 1,270{\text{ C}}} \right), \hfill \\ {\text{QIF }}\log f_{{\text{O}}_{\text{2}} } = - 27,517.5/T + 6.396\left( { \pm 0.049} \right) \hfill \\ {\text{ }}\left( {{\text{960}} - 1,140{\text{ C}}} \right), \hfill \\ {\text{FMQ }}\log f_{{\text{O}}_{\text{2}} } = - 24,441.9/T + 8.290\left( { \pm 0.167} \right) \hfill \\ {\text{ }}\left( {{\text{600}} - 1,140{\text{ C}}} \right). \hfill \\ \end{gathered}$$ These experimentally determined reaction parameters were combined with published 298 K data to determine the parameters Gf, Hf, and Sf for the phases wuestite, magnetite, hematite, and fayalite from 298 K to the temperatures of the experiments. The T? \(f_{{\text{O}}_{\text{2}} }\) data for wuestite solid solutions were used to obtain activities, excess free energies and Margules mixing parameters. The new data provide a more reliable, consistent and complete reference set for the interpretation of redox reactions at elevated temperatures in experiments and field settings encompassing the crust, mantle and core as well as extraterrestrial environments. 相似文献
12.
Tibor Gasparik 《Contributions to Mineralogy and Petrology》1985,89(4):346-357
In the system Na2O-CaO-Al2O3-SiO2 (NCAS), the equilibrium compositions of pyroxene coexisting with grossular and corundum were experimentally determined at 40 different P-T conditions (1,100–1,400° C and 20.5–38 kbar). Mixing properties of the Ca-Tschermak — Jadeite pyroxene inferred from the data are (J, K): $$\begin{gathered} G_{Px}^{xs} = X_{{\text{CaTs}}} X_{{\text{Jd}}} [14,810 - 7.15T - 5,070(X_{{\text{CaTs}}} - X_{{\text{Jd}}} ) \hfill \\ {\text{ }} - 3,350(X_{{\text{CaTs}}} - X_{{\text{Jd}}} )^2 ] \hfill \\ \end{gathered} $$ The excess entropy is consistent with a complete disorder of cations in the M2 and the T site. Compositions of coexisting pyroxene and plagioclase were obtained in 11 experiments at 1,190–1,300° C/25 kbar. The data were used to infer an entropy difference between low and high anorthite at 1,200° C, corresponding to the enthalpy difference of 9.6 kJ/mol associated with the C \(\bar 1\) =I \(\bar 1\) transition in anorthite as given by Carpenter and McConnell (1984). The resulting entropy difference of 5.0 J/ mol · K places the transition at 1,647° C. Plagioclase is modeled as ideal solutions, C \(\bar 1\) and I \(\bar 1\) , with a non-first order transition between them approximated by an empirical expression (J, bar, K): $$\Delta G_T = \Delta G_{1,473} \left[ {1 - 3X_{Ab} \tfrac{{T^4 - 1,473^4 }}{{\left( {1,920 - 0.004P} \right)^4 - 1,473^4 }}} \right],$$ where $$\Delta G_{1,473} = 9,600 - 5.0T - 0.02P$$ The derived mixing properties of the pyroxene and plagioclase solutions, combined with the thermodynamic properties of other phases, were used to calculate phase relations in the NCAS system. Equilibria involving pyroxene+plagioclase +grossular+corundum and pyroxene+plagioclase +grossular+kyani te are suitable for thermobarometry. Albite is the most stable plagioclase. 相似文献
13.
The biotite zone assemblage: calcite-quartz-plagioclase (An25)-phengite-paragonite-chlorite-graphite, is developed at the contact between a carbonate and a pelite from British Columbia. Thermochemical data for the equilibrium paragonite+calcite+2 quartz=albite+ anorthite+CO2+H2O yields: $$\log f{\text{H}}_{\text{2}} {\text{O}} + \log f{\text{CO}}_{\text{2}} = 5.76 + 0.117 \times 10^{ - 3} (P - 1)$$ for a temperature of 700°K and a plagioclase composition of An25. By combining this equation with equations describing equilibria between graphite and gas species in the system C-H-O, the following partial pressures: \(P{\text{H}}_2 {\text{O}} = 2572{\text{b, }}P{\text{CO}}_2 = 3162{\text{b, }}P{\text{H}}_2 = 2.5{\text{b, }}P{\text{CH}}_4 = 52.5{\text{b, }}P{\text{CO}} = 11.0{\text{b}}\) are obtained for \(f{\text{O}}_2 = 10^{ - 26}\) . If total pressure equals fluid pressure, then the total pressure during metamorphism was approximately 6 kb. The total fluid pressure calculated is extremely sensitive to the value of \(f{\text{O}}_2\) chosen. 相似文献
14.
The high-grade assemblage Cd-Ga-Si-Qz can be thermodynamically modelled from available calorimetric data on the metastable reaction: (I) $$3 MgCd \rightleftarrows 2 Py + 4 Si + 5 Qz$$ naturalK D Fe-Mg between garnet and cordierite and experimental results on cordierite hydration. In the system SiO2-Al2O3-MgO-H2O, reaction (I) becomes (II) $$3 MgCd \cdot nH_2 O \rightleftarrows 2 Py + 4 Si + 5 Qz + 3 nH_2 O$$ . However, hydrous cordierite is neither a hydrate nor a solid solution between water and anhydrous cordierite and when nH2O (number of moles of H2O in Cd) is plotted against \(P_{H_2 O} \) , the resulting isotherms are similar to adsorption isotherms characteristic of zeolitic minerals. Reaction (II) can thus be considered as a combination of reaction (I) with a physical equilibrium of the type nH2O (in Cd)?nH2O (in vapor phase). Starting from a point on equilibrium (I), introduction of H2O into anhydrous Mg-cordierite lowers the chemical potential of MgCd and hence stabilizes this mineral to higher pressure relative to the right-hand assemblage in reaction (I). The pressure increment of stabilization,ΔP, above the pressure limit of anhydrous cordierite stability at constantT, has been calculated using the standard thermodynamics of adsorption isotherms. Cordierite is regarded as a mixture of Mg2Al4Si5O18 and H2O. The activity of H2O in the cordierite is evaluated relative to an hypothetical standard state extrapolated from infinite H2O dilution, by using measured hydration data. The activity of Mg2Al4Si5O18 in the cordierite is then obtained by integration of the Gibbs-Duhem equation, and the pressure stabilization increment,ΔP, computed by means of the relation: $$\Delta V_s \Delta P \cong - RT\ln a_{MgCd}^{MgCd \cdot nH2O} \left( {\Delta V indepentdent of P and T} \right)$$ . Thus, one may contour theP-T plane in isopleths of nH2O=constant within the area of Mg-cordierite stability allowed by the hydration data for \(P_{H_2 O} = P_{total} \) . The present model indicates greater stabilization of cordierite by H2O than the model of Newton and Wood (1979) and the calculated curve for metastable breakdown of hydrous MgCd is consistent with experimental data on cordierite breakdown at \(P_{H_2 O} = P_{total} \) . Mg/(Mg+Fe) isopleths have been derived for cordierites of varying nH2O in the SiO2-Al2O3-MgO-FeO-H2O system using the additional assumptions that (Fe, Mg) cordierite and (Fe, Mg) garnet behave as ideal solutions, and that typical values of the distribution coefficient of Fe and Mg between coexisting garnet and cordierite observed in natural parageneses can be applied to the calculations. The calculated stable breakdown curve of Fe-cordierite under conditions of \(P_{H_2 O} = P_{total} \) to almandine, sillimanite, quartz and vapor has a positive slope (dP/dT) apparently in contrast to the experimental negative slope. This may be explained by hydration kinetics, which could have allowed systematic breakdown of cordierites of metastable hydration states in the experiments. The bivariant Cd-Ga fields calibrated from the present model are, potentially, good petrogenetic indicators, as, given the iron-magnesium ratio of garnet and cordierite and the hydration number of cordierite, the temperature, pressure and water fugacity are uniquely determined. As this geothermobarometer is in part based on the water content of cordierite, it can be used only if there is some assurance that the actual hydration is inherited from high-grade metamorphic conditions. Such conditions could be realised if the slope of unloading-cooling retrograde metamorphism is more or less parallel to a cordierite isohydron. 相似文献
15.
Gert Hoschek 《Contributions to Mineralogy and Petrology》1974,47(4):245-254
P, T, \(X_{{\text{CO}}_{\text{2}} }\) relations of gehlenite, anorthite, grossularite, wollastonite, corundum and calcite have been determined experimentally at P f =1 and 4 kb. Using synthetic starting minerals the following reactions have been demonstrated reversibly
- 2 anorthite+3 calcite=gehlenite+grossularite+3 CO2.
- anorthite+corundum+3 calcite=2 gehlenite+3 CO2.
- 3anorthite+3 calcite=2 grossularite+corundum+3CO2.
- grossularite+2 corundum+3 calcite=3 gehlenite+3 CO2.
- anorthite+2 calcite=gehlenite+wollastonite+2CO2.
- anorthite+wollastonite+calcite=grossularite+CO2.
- grossularite+calcite=gehlenite+2 wollastonite+CO2.
16.
Amy E. Hofmann Michael B. Baker John M. Eiler 《Contributions to Mineralogy and Petrology》2013,166(1):235-253
In order to evaluate the effect of trace and minor elements (e.g., P, Y, and the REEs) on the high-temperature solubility of Ti in zircon (zrc), we conducted 31 experiments on a series of synthetic and natural granitic compositions [enriched in TiO2 and ZrO2; Al/(Na + K) molar ~1.2] at a pressure of 10 kbar and temperatures of ~1,400 to 1,200 °C. Thirty of the experiments produced zircon-saturated glasses, of which 22 are also saturated in rutile (rt). In seven experiments, quenched glasses coexist with quartz (qtz). SiO2 contents of the quenched liquids range from 68.5 to 82.3 wt% (volatile free), and water concentrations are 0.4–7.0 wt%. TiO2 contents of the rutile-saturated quenched melts are positively correlated with run temperature. Glass ZrO2 concentrations (0.2–1.2 wt%; volatile free) also show a broad positive correlation with run temperature and, at a given T, are strongly correlated with the parameter (Na + K + 2Ca)/(Si·Al) (all in cation fractions). Mole fraction of ZrO2 in rutile $ \left( {\mathop X\nolimits_{{{\text{ZrO}}_{ 2} }}^{\text{rt}} } \right) $ in the quartz-saturated runs coupled with other 10-kbar qtz-saturated experimental data from the literature (total temperature range of ~1,400 to 675 °C) yields the following temperature-dependent expression: $ {\text{ln}}\left( {\mathop X\nolimits_{{{\text{ZrO}}_{ 2} }}^{\text{rt}} } \right) + {\text{ln}}\left( {a_{{{\text{SiO}}_{2} }} } \right) = 2.638(149) - 9969(190)/T({\text{K}}) $ , where silica activity $ a_{{{\text{SiO}}_{2} }} $ in either the coexisting silica polymorph or a silica-undersaturated melt is referenced to α-quartz at the P and T of each experiment and the best-fit coefficients and their uncertainties (values in parentheses) reflect uncertainties in T and $ \mathop X\nolimits_{{{\text{ZrO}}_{2} }}^{\text{rt}} $ . NanoSIMS measurements of Ti in zircon overgrowths in the experiments yield values of ~100 to 800 ppm; Ti concentrations in zircon are positively correlated with temperature. Coupled with values for $ a_{{{\text{SiO}}_{2} }} $ and $ a_{{{\text{TiO}}_{2} }} $ for each experiment, zircon Ti concentrations (ppm) can be related to temperature over the range of ~1,400 to 1,200 °C by the expression: $ \ln \left( {\text{Ti ppm}} \right)^{\text{zrc}} + \ln \left( {a_{{{\text{SiO}}_{2} }} } \right) - \ln \left( {a_{{{\text{TiO}}_{2} }} } \right) = 13.84\left( {71} \right) - 12590\left( {1124} \right)/T\left( {\text{K}} \right) $ . After accounting for differences in $ a_{{{\text{SiO}}_{2} }} $ and $ a_{{{\text{TiO}}_{2} }} $ , Ti contents of zircon from experiments run with bulk compositions based on the natural granite overlap with the concentrations measured on zircon from experiments using the synthetic bulk compositions. Coupled with data from the literature, this suggests that at T ≥ 1,100 °C, natural levels of minor and trace elements in “granitic” melts do not appear to influence the solubility of Ti in zircon. Whether this is true at magmatic temperatures of crustal hydrous silica-rich liquids (e.g., 800–700 °C) remains to be demonstrated. Finally, measured $ D_{\text{Ti}}^{{{\text{zrc}}/{\text{melt}}}} $ values (calculated on a weight basis) from the experiments presented here are 0.007–0.01, relatively independent of temperature, and broadly consistent with values determined from natural zircon and silica-rich glass pairs. 相似文献
17.
J. M. Ferry 《Contributions to Mineralogy and Petrology》1976,57(2):119-143
In a regional metamorphic terrain where six isograds have been mapped based on mineral reactions that are observed in metacarbonate rocks, the P-T conditions and fugacities of CO2 and H2O during metamorphism were quantified by calculations involving actual mineral compositions and experimental data. Pressure during metamorphism was near 3,500 bars. Metamorphic temperatures ranged from 380° C (biotite-chlorite isograd) to 520° C (diopside isograd). \(f_{{\text{CO}}_{\text{2}} }\) and \(f_{{\text{CO}}_{\text{2}} }\) / \(f_{{\text{H}}_{\text{2}} {\text{O}}}\) in general is higher in metacarbonate rocks below the zoisite isograd than in those above the zoisite isograd. Calculated \(f_{{\text{CO}}_{\text{2}} }\) and \(f_{{\text{H}}_{\text{2}} {\text{O}}}\) are consistent with carbonate rocks above the zoisite isograd having equilibrated during metamorphism with a bulk supercritical fluid in which \(P_{{\text{CO}}_{\text{2}} }\) + \(P_{{\text{H}}_{\text{2}} {\text{O}}}\) = P total. Calculations indicate that below the zoisite isograd, however, \(P_{{\text{CO}}_{\text{2}} }\) + \(P_{{\text{H}}_{\text{2}} {\text{O}}}\) was less than Ptotal, and that this condition is not due to the presence of significant amounts of species other than CO2 and H2O in the system C-O-H-S. Calculated \(P_{{\text{CO}}_{\text{2}} }\) /( \(P_{{\text{CO}}_{\text{2}} }\) + \(P_{{\text{H}}_{\text{2}} {\text{O}}}\) ) is low (0.06–0.32) above the zoisite isograd. The differences in conditions above and below the zoisite isograd may indicate that the formation of zoisite records the introduction of a bulk supercritical H2O-rich fluid into the metacarbonates. The results of the study indicate that \(f_{{\text{CO}}_{\text{2}} }\) and \(f_{{\text{H}}_{\text{2}} {\text{O}}}\) are constant on a thin section scale, but that gradients in \(f_{{\text{CO}}_{\text{2}} }\) and \(f_{{\text{H}}_{\text{2}} {\text{O}}}\) existed during metamorphism on both outcrop and regional scales. 相似文献
18.
The experimental distribution coefficient for Ni/ Fe exchange between olivine and monosulfide (KD3) is 35.6±1.1 at 1385° C, \(f_{{\text{O}}_{\text{2}} } = 10^{ - 8.87} ,f_{{\text{S}}_{\text{2}} } = 10^{ - 1.02} \) , and olivine of composition Fo96 to Fo92. These are the physicochemical conditions appropriate to hypothesized sulfur-saturated komatiite magma. The present experiments equilibrated natural olivine grains with sulfide-oxide liquid in the presence of a (Mg, Fe)-alumino-silicate melt. By a variety of different experimental procedures, K D3 is shown to be essentially constant at about 30 to 35 in the temperature range 900 to 1400° C, for olivine of composition Fo97 to FoO, monosulfide composition with up to 70 mol. % NiS, and a wide range of \(f_{{\text{O}}_{\text{2}} } \) and \(f_{{\text{S}}_{\text{2}} } \) . 相似文献
19.
Experiments reproducing the development of bimetasomatic zoning in the CaO-MgO-SiO2-H2O-CO2 system were conducted at elevated P-T parameters with the use of samples of naturally occurring quartzdolomite and calcite-serpentinite rocks. In order to maintain mass transfer exclusively via the diffusion-controlled mechanism, we used the method of the ensured compaction of the cylindrical sample surface with a thin-walled gold tube. In the course of the experiments, a single diopside zone ～2.5 × 10?5 m thick was obtained at the quartz-dolomite interface at T = 600°C, $P_{H_2 O + CO_2 } $ = 200 MPa, and $X_{CO_2 } $ = 0.5 for 25–40 days and a succession of metasomatic zones at T = 750°C, $P_{H_2 O + CO_2 } $ = 300 MPa, and $X_{CO_2 } $ = 0.4 for 48 days. The metasomatic zones were as follows (listed in order from quartz to dolomite): wollastonite ‖ diopside ‖ tremolite ‖ calcite + forsterite; with the average width of the diopside zone equal to ～1.3 × 10?5 m and the analogous part of the wollastonite zone equal to ～2.6 × 10?5 m. Two zones (listed in order from calcite to serpentine) diopside and diopside-forsterite (the average widths of these zones were ～6 × 10?4 and ～8 × 10?4 m, respectively) were determined to develop at contact between serpentine and calcite during experiments that lasted 124 days at T = 500°C, $P_{H_2 O + CO_2 } $ = 200 MPa, and $X_{CO_2 } $ = 0.2–0.4. In the former and latter situations, the growth rate of the zoning ranged between 3.1 × 10?12 and 1.2 × 10?11 m/s and between 5.6 × 10?11 and 7.5 × 10?11 m/s, respectively. The higher growth rate in the latter case can be explained by the higher water mole fraction in the fluid, with this water released during serpentinite decomposition in the experiments. The development of the only diopside zone in the experiments modeling the interaction of quartz and dolomite at T = 600–650°C and $P_{H_2 O + CO_2 } $ = 200 MPa is in conflict with theoretical considerations underlain by the Korzhinskii-Fisher-Joesten model. The interaction of quartz and dolomite in the CaO-MgO-SiO2-CO2-H2O system at the P-T- $X_{CO_2 } $ parameters specified above should be attended by the origin of a number of reaction zones consisting of various proportions of talc, forsterite, tremolite, diopside, and calcite. The saturation of the fluid with respect to these minerals was likely not reached, and this resulted in the degeneration of the respective stability fields in the succession of zones. Conceivably, this was related to the insufficient rates of quartz and dolomite dissolution and the relatively low diffusion rates of the dissolved species in the low-permeable medium. In the experiments with interacting calcite and serpentine, the zoning calcite ‖ diopside ‖ diopside + forsterite ‖ serpentine developed in its complete form, in agreement with the theory. Equilibrium was likely achieved in these experiments due to the higher diffusion coefficients. 相似文献
20.
M. A. Carpenter 《Physics and Chemistry of Minerals》1992,19(1):1-24
Variations in the equilibrium degree of Al/Si order in anorthite have been investigated experimentally over the temperature range 800-1535° C. Spontaneous strain measurements give the temperature dependence of the macroscopic order parameter, Q, defined with respect to the \(C\bar 1 \rightleftharpoons I\bar 1\) phase transition, while high temperature solution calorimetric data allow the relationship between Q and excess enthalpy, H, to be determined. The thermodynamic behaviour can be described by a Landau expansion in one order parameter if the transition is first order in character, with an equilibrium transition temperature, T tr, of ～2595 K and a jump in Q from 0 to ～0.65 at Ttr. The coefficients in this Landau expansion have been allowed to vary with composition, using Q=1 at 0 K for pure anorthite as a reference point for the order parameter. Published data for H and Q at different compositions allow the calibration of the additional parameters such that the free energy due to the \(C\bar 1 \rightleftharpoons I\bar 1\) transition in anorthite-rich plagioclase feldspars may be expressed (in cal. mole-1) as: \(\begin{gathered}G = \tfrac{1}{2} \cdot 9(T - 2283 + 2525X_{Ab} )Q^2 \\ {\text{ + }}\tfrac{1}{4}( - 26642 + 121100X_{Ab} )Q^4 \\ {\text{ + }}\tfrac{1}{6}(47395 - 98663X_{Ab} )Q^6 \\ \end{gathered}\) where X Ab is the mole fraction of albite component. The nature of the transition changes from first order in pure anorthite through tricritical at ～An78 to second order, with increasing albite content. The magnitude of the free energy of \()\) ordering reduces markedly as X Ab increases. At ～700° C incommensurate ordering in crystals with compositions ～An50–An70 needs to have an associated free energy reduction of only a few hundred calories to provide a more stable structure. These results, together with a simple mixing model for the disordered ( \()\) ) solid solution, an assumed tricritical model for the incommensurate ordering and published data for ordering in albite have been used to calculate a set of possible free energy relations for the plagioclase system. The incommensurate structure should appear on the equilibrium phase diagram, but its apparent stability with respect to the assemblage albite plus anorthite at low temperatures depends on the values assigned to the mixing parameters of the $$$$ solid solution. 相似文献