共查询到20条相似文献,搜索用时 843 毫秒
1.
一、引言
等高线是其它地形表示方法的几何基础,一组有一定间隔的等高线的组合可以用来较好地反映地面的起伏形态和切割程度。利用等高线数据来构建DEM是DEM数据生产的重要方式之一,不仅可以完整地表现地形的整体特征,还能保留某些复杂区域的地形特征。 相似文献
2.
不同空间尺度DEM地形信息容量综合对比研究 总被引:1,自引:0,他引:1
DEM包含了大量地形信息,是进行地形分析的基本数据。由于DEM数据的多尺度因素,加之地形、地貌特征具有宏观性与区域分异性的特点,不同尺度下的DEM地形信息容量具有较大的差异。本研究选取黄土高原地区的绥德、佳县、富县和宜君县四个实验样区,以Arc view/GIS软件为技术平台,提取了基于DEM数据的地形因子,并运用比较分析与数理统计的方法,对地形因子的提取结果进行了分析,获取了单一值因子的量化表达模型,确定了DEM地形信息容量与分辨率、地域及比例尺之间的量化相关关系,并在此基础上分析了DEM地形信息容量在不同空间尺度上的分异规律。 相似文献
3.
数字高程模型(DEM)在描述地形时会存在一定程度的失真现象,对失真DEM进行修复可以有效地提高其精度及保真度。本文针对DEM在描述规则地形时存在的失真现象,提出了用地形特征约束失真DEM形态结构的失真修复方法,以规则地形中的平地结构地形为例,进行了失真修复试验。首先根据地形特征确定平地地形的DEM应为平面结构,再采用最小二乘法(LS)及随机抽样一致性算法(RANSAC)对其平面方程进行参数估计,进而得到修复的DEM数据。试验结果表明,本文所提的修复方法有效可行,修复后的DEM数据不仅提高了精度,还能充分地反映原地形的地形特征。两种修复算法的修复能力相接近,当存在大量格网点时,都能达到很好的修复效果,但RANSAC更能适应高程异常的情况,鲁棒性更好。 相似文献
4.
提出了一种基于地形区域分割的分类方法,在影像中利用地形特征数据预先划分出每种地物的分布区域,然后以区域为基本单位对影像进行分类,同时利用DEM数据对影像进行地形校正,减小了同种地物内部由于地形起伏造成的光谱离散的现象。利用湖北西部山区的TM影像和DEM数据的试验证明,利用地形特征数据进行分割的分类方法与仅考虑光谱特征的分类方法相比较,分类精度有了明显的提高。 相似文献
5.
利用地形信息强度进行DEM地形简化研究 总被引:1,自引:0,他引:1
在对现有的DEM地形简化方法进行总结分析的基础上,提出了一种利用地形信息强度指数的DEM简化方案.首先提取DEM点位地形信息强度指数值,然后通过阈值法确定候选地形特征点重构DEM,以国家基本比例尺1∶5万DEM作为参照目标,并将重要点法和三维道格拉斯法作为对比方法,对应用该方法进行地形简化的效果进行了综合评价.实验结果表明,该方法应用于大范围DEM简化中可以有效地保留地形骨架的结构特征,同时具有较高的数值精度,可以满足不同层次的多尺度DEM建模的要求. 相似文献
6.
基于DEM进行地形分析时,DEM尺度的转换会引起地形属性的变化。基于小波变换派生多尺度DEM数据,利用选取的地形参数对其数字地形分析适用性进行研究。通过分析DEM尺度转换中的地形分析效应变化趋势,探讨小波变换派生DEM多尺度数据的适宜性范围。 相似文献
7.
《测绘科学技术学报》2013,(5)
对于绝大多数DEM插值算法而言,很大程度上依赖于局部范围内采样点数据集的地形特征。因此,本文选用地表粗糙度和空间分布指标建立了局部地形特征描述模型,用以描述局部范围内采样点数据集的特征;然后运用K均值聚类分析和残差比较分析等方法,研究了地表粗糙度指标和空间分布指标对DEM插值算法的相关关系,相应结论有助于DEM插值算法的局部地形特征适应性选择。 相似文献
8.
针对1″SRTM数据和基于1∶50000地形图生成的DEM在黄土侵蚀区对地表形态表达能力的差异性问题,提出了一套完整的评价分析指标体系。选取陕西黄土高原6大典型黄土地貌样区,从地形属性(高程、坡度、坡向、坡长)和地形特征(山顶点、流水线、流域边界)两大方面评估了两种数据对表达黄土侵蚀区的地形表达能力。结果表明:1″SRTM对地表形态的表达能力接近1∶50000地形图所生成的DEM,但总体上还是1∶50000地形图所生成的DEM对地表形态的表达比较好,尤其是在地形比较破碎的地区。本文为1″SRTM数据在部分区域替代地形图生成的Hc-DEM,并用于与地学相关领域的研究提供了重要依据。 相似文献
9.
10.
11.
12.
机载激光雷达技术(LiDAR)作为一项先进的遥感技术,是植被覆盖区DEM获取的重要手段之一,而不同地形坡度条件及点云密度对DEM产品质量有重要影响。本文以辽宁省某市的机载LiDAR数据为基础,选取5种不同地形坡度的点云数据,通过随机、等间距及基于曲率3种不同的点云抽稀方法,按照点云保留率为80%、60%、40%、20%和10%共5个不同梯度的抽稀倍数对原始点云进行抽稀简化处理,生成与之对应的DEM并对其进行精度评价,以此研究地形坡度、点云抽稀方法、抽稀倍数对DEM精度的影响。结果表明,DEM精度与地形坡度呈负相关关系,即RMSE随地形坡度升高不断增加;基于曲率的抽稀方法在地形坡度>30°时,相较于其他两种方法RMSE较小,具有明显优势;40%的点云保留率是平衡DEM精度与数据存储效率的一个节点,当点云保留率<40%时,DEM的高程RMSE会迅速增大。该研究对于利用机载LiDAR进行大范围DEM生产具有一定的指导和借鉴意义。 相似文献
13.
Automatic digital elevation model (DEM) generation has become an established technique within mapping agencies. This paper assesses the effectiveness of automatic DEM generation using area-based matching for glaciated terrain in Antarctica. DEM accuracy is assessed by comparison with check data acquired using analytical photogrammetry and independent field measurements.An optimum DEM collection strategy is identified. DEM success is linked to ground terrain type and it is found that areas of a DEM which can be collected successfully are relatively insensitive to changes in the collection strategy. A method of isolating unsuccessful areas of a DEM for manual editing is tested for Antarctic terrain. In this example, over 90% success is achieved in identifying erroneous DEM results measured against check data. 相似文献
14.
针对边坡的台阶状地形特征是露天矿地形表达的关键和难点问题,该文基于边坡台阶要素的空间关系建立边坡层次关系模型,采用一种逐层加入扩展点和约束线的方法生成扩展约束TIN模型,将某露天煤矿作为实验区,实现了露天矿DEM的动态建模。结果表明:提高了边坡坡面的层级可视化效果,保持了地形结构的完整性,实现了边坡实体单元的分层次表达,能够获得不同水平层次的DEM数据。基于边坡特征分析的分层约束方法为露天矿DEM的构建提供了一种思路,可为边坡监测、灾变分析和灾情预测等领域提供精确的地形数据。 相似文献
15.
16.
As an important method of terrain representation, a DEM usually needs to be generalized at multiple resolutions in order to adapt to different applications. The preservation of main landscape features is an important constraint in DEM generalization. The traditional generalization method based on signal processing by resampling or low-pass filtering is just a data compression operation rather than the abstraction of real information. This study develops a structured analysis method to generalize DEM data through the identification of minor valleys and filling the corresponding depression positions. The generalization process has two steps: geographic decision and geometric operation. According to their hydrological significance, the unimportant valley branches are detected and their corresponding coverage is filled by raising the terrain to make the terrain surface smoother. In contrast to the conventional algorithms based on image processing, this method is able to retain the main geographical characteristics more effectively in terrain representation. 相似文献
17.
基于规则格网DEM自动提取地性线的一种简便方法 总被引:1,自引:0,他引:1
给出了一种基于规则格网DEM自动提取地性线的简便方法,阐述了其具体实现过程,实验表明其不仅易于实现,而且还是一种基本上对大部分常规地形的DEM均适用的方法。 相似文献
18.
19.
20.
This paper reports an investigation into the generalization of a grid-based digital elevation model (DEM) for the purpose of terrain analysis. The focus is on the method of restructuring the grid-based surface elevation data to form a triangulated irregular network (TIN) that is optimized to keep the important terrain features and slope morphology with the minimum number of sample points. The critical points of the terrain surface are extracted from the DEM based on their significance, measured not only by their local relief, but also by their importance in identifying inherent geomorphological and drainage features in the DEM. A compound method is proposed by integrating the traditional point-additive and feature-point methods to construct a drainage-constrained TIN. The outcome is then compared with those derived from other selected methods including filtering, point-additive or feature-point algorithms. The results show that the compound approach is capable of taking advantage of both point-additive and feature-point algorithms to maximally keep the terrain features and to maintain RMSE at an acceptable level, while reducing the elevation data points by over 99%. The analytical result also shows that the proposed method outperforms the compared methods with better control in retaining drainage features at the same level of RMSE. 相似文献