共查询到20条相似文献，搜索用时 31 毫秒
1.
新疆地貌数字区划 总被引：2，自引：1，他引：1
This paper presents a method of geomorphologic regionalization for Xinjiang, with the use of Srtm-DEM (resolution 90 m) and
TM images for 1990 (resolution 30 m). After interpretation and classification of geomorphologic types, the present research
focuses on the qualitative and quantitative distribution of different geomorphologic types based on geographical grid analysis.
Then, by using system clustering analysis method, geomorphologic types are grouped into divisions. The resulting geomorphologic
regionalization hierarchy of Xinjiang includes three levels, i.e., macro-landform divisions, medium-landform divisions, and
micro-landform divisions, containing 6, 23 and 200 types, respectively. This method makes it possible to digitally delimit
geomorphologic regions. Comparison and verification show that the spatial precision of the boundaries of geomorphologic subareas
in Xinjiang is very high. 相似文献
2.
基于地理格网的新疆地貌区划方法与实现 总被引：3，自引：1，他引：2
利用遥感影像和Srtm-DEM等多源信息解译的新疆数字地貌图为基础数据源,运用地理格网方法对新疆地貌类型分布进行定性与定量分析,在此基础上,通过自下而上的合并与自上而下的划分相结合的系统聚类分析法,确定各级地貌区划单元及其区划界线,实现新疆地貌的智能化分区。将新疆地貌分为一级、二级和三级地貌区划。其中,一级为6个地貌区 ,二级为23个地貌区,三级为200个地貌区。研究结果表明,在所依据的地貌数据基础上,采用地理格网地貌区划方法,能够实现地貌区划的智能化分区。本研究中的地貌分区和区划等级合理,区划界线准确可靠,利用地理格网方法实现了区划的定量化和数字化。 相似文献
3.
新疆地貌空间分布格局分析 总被引：4，自引：1，他引：3
以高分辨率遥感影像为本底数据的最新新疆地貌数据,能提高定量化地貌格局分析结果的准确性、客观性和科学性。本文利用地学统计和GIS空间分析方法,基于最新新疆地貌数据,定量化分析了地貌的分布特征、空间格局。结果表明:(1)大地貌单元中,平原地貌约占新疆总面积的1/3;(2)地势分级,中海拔地貌占绝对优势,约占全疆总面积1/2;(3)形态类型中,丘陵地貌在地势起伏中占主导地位,面积最大,主要分布在两大沙漠中,以沙丘形式分布;(4)基本地貌类型,中海拔丘陵最多,占总面积的21.417%;(5)成因类型中,流水、风成和干燥作用占主导地位;(6)受不同形成条件和控制范围的影响,新疆成因类型的分布特征随着海拔和起伏的变化而变化;(7)总体上,新疆地貌的空间格局呈现出两大特征:水平环形特征和垂直地带性特征。 相似文献
4.
地貌类型混合法研究 总被引：1，自引：0，他引：1
高玄彧 《地理与地理信息科学》2006,22(2):83-87
针对现有地貌分类法的不足提出地貌类型混合法。该方法将地貌类型划分为主体地貌和客体地貌,主体地貌是载体,客体地貌是被载体,把客体地貌混合表示在主体地貌之上,解决了现有地貌分类的缺陷。与形态成因分类法相比,该方法探索了地貌分类的新途径,为促进地貌制图的实用性、简洁性奠定了基础。 相似文献
5.
6.
DEM提取黄土高原地面坡度的不确定性 总被引：72，自引：0，他引：72
选择陕北黄土高原6个典型地貌类型区为试验样区,采用野外实测及高精度的1:1万比例尺DEM为基准数据,研究栅格分辨率及地形粗糙度对DEM所提取地面平均坡度精度的影响。结果显示,对于1:1万比例尺DEM,5 m是保证该地区地形描述精度的理想分辨率尺度;多要素逐步回归模拟的方法进一步揭示了DEM所提取的地面平均坡度误差E与栅格分辨率X以及地形起伏的代表性因子-沟壑密度S之间存在的量化关系为E = (0.0015S2+0.031S-0.0325)X-0.0045S2-0.155S+0.1625,该结果也为确定适用的DEM分辨率提供了理论依据。 相似文献
7.
不同分辨率DEM提取地面坡度的不确定性模拟:以在黄土高原的试验为例 总被引：1，自引：0，他引：1
Slope is one of the crucial terrain variables in spatial analysis and land use planning,especially in the Loess Plateau area of China which is suffering from serious soil erosion. DEM based slope extracting method has been widely accepted and applied in practice. However slope accuracy derived from this method usually does not match with its popularity. A quantitative simulation to slope data uncertainty is important not only theoretically but also necessarily to applications. This paper focuses on how resolution and terrain complexity impact on the accuracy of mean slope extracted from DEMs of different resolutions in the Loess Plateau of China. Six typical geomorphologic areas are selected as test areas, representing different terrain types from smooth to rough. Their DEMs are produced from digitizing contours of 1:10,000 scale topographic maps. Field survey results show that 5 m should be the most suitable grid size for representing slope in the Loess Plateau area. Comparative and math-simulation methodology was employed for data processing and analysis. A linear correlativity between mean slope and DEM resolution was found at all test areas,but their regression coefficients related closely with the terrain complexity of the test areas. If taking stream channel density to represent terrain complexity, mean slope error could be regressed against DEM resolution (X) and stream channel density (S) at 8 resolution levels and expressed as (0.0015S2+0.031S-0.0325)X-0.0045S2-0.155S+0.1625, with a R2 value of over 0.98. Practical tests also show an effective result of this model in applications. The new development methodology applied in this study should be helpful to similar researches in spatial data uncertainty investigation. 相似文献
8.
TANGGuoan ZHAOMudan LITianwen LIUYongmei ZHANGTing 《地理学报(英文版)》2003,13(4):387-394
Slope is one of the crucial terrain variables in spatial analysis and land use planning, especially in the Loess Plateau area of China which is suffering from serious soil erosion. DEM based slope extracting method has been widely accepted and applied in practice. However slope accuracy derived from this method usually does not match with its popularity. A quantitative simulation to slope data uncertainty is important not only theoretically but also necessarily to applications. This paper focuses on how resolution and terrain complexity impact on the accuracy of mean slope extracted from DEMs of different resolutions in the Loess Plateau of China. Six typical geomorphologic areas are selected as test areas, representing different terrain types from smooth to rough. Their DEMs are produced from digitizing contours of 1:10,000 scale topographic maps. Field survey results show that 5 m should be the most suitable grid size for representing slope in the Loess Plateau area. Comparative and math-simulation methodology was employed for data processing and analysis. A linear correlativity between mean slope and DEM resolution was found at all test areas, but their regression coefficients related closely with the terrain complexity of the test areas. If taking stream channel density to represent terrain complexity, mean slope error could be regressed against DEM resolution (X) and stream channel density (S) at 8 resolution levels and expressed as(0.0015S2 0.031S-0.0325)X-0.0045S2-0.155S 0.1625, with a R2 value of over 0.98. Practical tests also show an effective result of this model in applications. The new development methodology applied in this study should be helpful to similar researches in spatial data uncertainty investigation. 相似文献
9.
Slope is one of the crucial terrain variables in spatial analysis and land use planning, especially in the Loess Plateau area of China which is suffering from serious soil erosion. DEM based slope extracting method has been widely accepted and applied in practice. However slope accuracy derived from this method usually does not match with its popularity. A quantitative simulation to slope data uncertainty is important not only theoretically but also necessarily to applications. This paper focuses on how resolution and terrain complexity impact on the accuracy of mean slope extracted from DEMs of different resolutions in the Loess Plateau of China. Six typical geomorphologic areas are selected as test areas, representing different terrain types from smooth to rough. Their DEMs are produced from digitizing contours of 1:10,000 scale topographic maps. Field survey results show that 5 m should be the most suitable grid size for representing slope in the Loess Plateau area. Comparative and math-simulation methodology was employed for data processing and analysis. A linear correlativity between mean slope and DEM resolution was found at all test areas, but their regression coefficients related closely with the terrain complexity of the test areas. If taking stream channel density to represent terrain complexity, mean slope error could be regressed against DEM resolution (X) and stream channel density (S) at 8 resolution levels and expressed as (0.0015S2+0.031S-0.0325)X-0.0045S2-0.155S+0.1625, with a R2 value of over 0.98. Practical tests also show an effective result of this model in applications. The new development methodology applied in this study should be helpful to similar researches in spatial data uncertainty investigation. 相似文献
10.
哈密地区旅游资源开发研究 总被引：4，自引：3，他引：1
在对哈财区旅游资源实地调查的基础上,论述了哈密地区旅游资源的类特征和分布特征,并进行了旅游资源的区划,对各种旅游区旅游资源的开发思路,开发项目等分近、中、远三期做了明确的规划,景后提出了地区旅游网络的建设设想。 相似文献
11.
新疆荒漠具有分布广泛、成因复杂、类型多样等特点。利用新疆数字地貌图结合Landsat卫星TM数据与GIS制图技术,通过长期野外调查结合有关资料编制荒漠类型图,获得荒漠类型面积数据,据此探讨荒漠分布规律、结构特征、形成演变,并提出利用和保护荒漠的建议。主要结果和结论如下：（1）新疆荒漠具有水平地带性分布与垂直地带性分布的规律及非地带性分布特点,荒漠多分布于干旱程度较高的南疆和东部吐鲁番及哈密地区,东部荒漠占新疆面积的45.86 %,占东部区域面积的91.77 %。（2）荒漠分布广,面积大,总面积达1 31.3 ?104 km2,占新疆面积的80.55 %。荒漠类型面积最大的是沙漠为42.7?104 km2,占荒漠面积32.49 %,泥漠面积仅10 638.5?104 km2,占0.81 %。（3）荒漠类型复杂多样,成因各异,有沙漠、砾漠、盐漠等11种类型,分别主要由气候、地貌、地表物质组成、人为作用等因素单独或共同作用所形成。（4）受自然环境变化与人为作用,荒漠类型之间、荒漠类型与其它地物之间可发生演变。（5）各种荒漠类型的要素特征不同,宜合理利用荒漠资源,划分荒漠环境退化敏感区,保护荒漠环境,针对不同荒漠类型采取适应保护措施,以保障区域可持续发展。 相似文献
12.
基于ASTER GDEM数据喀斯特区域地貌类型划分与分析 总被引：5，自引：1，他引：4
以30 m分辨率ASTER GDEM数据为基础,通过GIS空间分析和非监督分类的方法进行地貌基本类型的自动划分。研究结果表明:①ASTERGDEM数据能够满足1∶10万比例尺下喀斯特区域的地表形态表达;②以流域为单位提取地形因子符合地貌发育的基本规律,提取的地形因子能客观的反应地表真实形态;③采用非监督分类法能够有效的实现1∶10万比例尺下地貌基本形态的定量化、自动化分类。 相似文献
13.
14.
Geomorphology is one of the main subdisciplines of geography. The research achievements and prospects in geomorphology have received considerable attention for a long time. In this paper, a general retrospect of geomorphologic research in China over the past 60 years was firstly addressed, especially the research progress during the last 40 years. Based on a summary of experience and a tendency of development, perspectives of geomorphologic research direction in the future were provided. It is concluded that the discipline of geomorphology has made great progress in the aspects of geomorphologic types, regionalization, as well as their subdisciplines such as dynamic geomorphology, tectonic geomorphology, climatic geomorphology, lithological geomorphology, palaeogeomorphology. We believe that persisting in the unity principle between morphological and genetic types would be conductive for the development of traditional landforms and integrated landforms. In addition, five perspectives aim to enhance China’s geomorphologicl research capacity were proposed. They are: (1) strengthening the research of basic geomorphologic theory and the research of integrated geomorphology to expand the research space; (2) focusing more on the research of geomorphologic structure and geomorphologic function to improve the application ability of geomorphology; (3) constructing a comprehensive resource, environmental, and geomorphologic information system and building a sharing platform to upgrade the intelligent information industry of geomorphology; (4) putting more efforts on the research of coastal geomorphology and marine geomorphology to assist the transformation of China from a maritime country to an ocean power; and (5) cultivating talents and constructing research teams to maintain a sustainable development of China’s geomorphologic research. 相似文献
15.
新疆农业地貌分类：以编制新疆1：100万农业地貌图为例 总被引：1，自引：0，他引：1
针对新疆地域辽阔，地形起伏巨大，山地层状地貌显著，盆地封闭、干旱，风成和流水地貌发育等特点，着眼于地貌与农业的关系，采用形态与成因相结合的分类原则，以地貌与农业关系密切的海拔高程、物质组成、相对高差、坡度等要素为指标，制定新疆农业地貌分类系统，划分农业地貌类型。 相似文献
16.
主成分分析法在新疆兵团经济可持续发展能力评价中的应用 总被引：1，自引：0，他引：1
采用多元统计主成分分析方法对新疆兵团13个师1991～2006年的各师农场职工家庭人均纯收入、人均农业增加值、人均工业增加值、人均第二产业增加值、人均GDP等11个经济指标进行分析计算并且对各师的综合经济可持续能力进行比较。结果表明：从原始数据中提出占总方差86．6％的4个因子来反映各师的经济可持续发展程度,经分析发现影响各师的4个主成分因子：（1）人均GDP、人均工业增加值（包括第二产业、第三产业的增加值）的因子控制;（2）人均新增固定资产、人均固定资产投资等反映人均资产投入的综合指标;（3）反映人均耕地面积、人均利润、人均社会消费品零售总额的综合指标。（4）反映人均农业增加值、人均固定资产投入及人均社会消费品零售总额的综合指标。然后将各主成分得分结合主成分权重进行计算得出各师经济可持续能力值,其中农一师排在第一。从总体上看1992～2006年各师经济可持续发展的综合指标趋势是逐渐上升的,发展具有可持续性。, 相似文献
17.
地形复杂度（TCI）是区域地表外在形态结构的数字化表达,既可表征坡面单元的多样性及其组合形式的复杂性,也可映射地球内外营力在地表留下“烙印”的过程,其客观描述和定量表达可为地表形态定义、刻画及分异等地形地貌理论研究提供重要依据。新疆独特的山盆地貌结构为地貌学研究提供了理想的场所。本文基于“倒金字塔滤网系统”逐步筛选微观和宏观坡面因子并确定权重进而构建地形复杂度模型;运用均值变点法确定新疆地形复杂度的最佳窗口,分析不同地貌单元地形复杂度的空间异质性,进一步探究不同营力作用对地表复杂程度的贡献。结果显示：① 地形复杂度模型综合相关性分析、聚类分析、变异系数法与主成分分析等方法对地形因子进行客观筛选与科学组合,使其具有全面客观性及独立有效性。② 地形复杂度以ASTER GDEM数据（30 m）为基础,得到最佳窗口（14×14）下全疆TCI介于0.13~46.36。山地与盆地相同地貌类型TCI面积占比峰值相近,不同地貌类型可比较其斜率、偏度及峰度得以区分。在经纬向上能更好的刻画出独立山峰及深切峡谷等局部地形分异,TCI≈1可作为平原与山地地貌单元之间的分界值。在高程分区下TCI>2时为各山系（山群）震荡高程区起始处,山麓处TCI曲线差异显著。③ 地形复杂度能较好的体现不同外营力在地表留下的痕迹,一定程度上也可表征外营力对不同成因地貌类型的贡献度。本研究对新疆地形地貌的形态特征和形成原因等方面提供理论依据和科学方法,可为地形地貌研究、生态环境影响以及区域发展评价提供实践指导。 相似文献
18.
清代中期江苏省土地利用格局网格化重建 总被引：5，自引：2，他引：3
针对当前历史土地利用空间重建研究多基于单一地类且空间分辨率较低的特征,提出较高分辨率全地类土地利用空间重建方法。以1820年为时间断面,以现代江苏省域为研究区,以历史文献记载、历史地理学研究成果、现代统计数据、自然环境数据等为支撑,将土地利用类型划分为耕地、聚落用地（含城镇用地、农村居民点用地）、水域和其他用地（含林草地及未利用地）,考虑区域自然资源和社会经济特征,提出理论假设,对府级耕地、城镇用地、农村居民点用地数量进行修正;沿用以现代土地利用格局为基础反演历史土地利用格局的基本思路,从人地关系角度出发,采用治所邻近度分析、综合评价等方法重建了1820年100 m×100 m空间格网下的江苏省土地利用格局,同时,通过不同地理分区统计及降尺度对比间接验证等分析了重建结果。结果表明：① 1820年江苏省耕地、城镇用地、农村居民点用地、水域用地及其他用地面积分别占区域总面积的48.49%、4.46%、0.16%、15.03%和31.86%;② 1820年研究区内土地垦殖率较高,但建设用地比率较低,受人口分布、地形及河网密度等影响,不同地理分区土地利用差异较为显著;③ 农村居民点用地及耕地的降尺度分析结果均呈显著线性正相关,在一定程度上表明研究结果具有合理性。 相似文献
19.
Automated classifications of topography from DEMs by an unsupervised nested-means algorithm and a three-part geometric signature 总被引：7，自引：3，他引：7
An iterative procedure that implements the classification of continuous topography as a problem in digital image-processing automatically divides an area into categories of surface form; three taxonomic criteria–slope gradient, local convexity, and surface texture–are calculated from a square-grid digital elevation model (DEM). The sequence of programmed operations combines twofold-partitioned maps of the three variables converted to greyscale images, using the mean of each variable as the dividing threshold. To subdivide increasingly subtle topography, grid cells sloping at less than mean gradient of the input DEM are classified by designating mean values of successively lower-sloping subsets of the study area (nested means) as taxonomic thresholds, thereby increasing the number of output categories from the minimum 8 to 12 or 16. Program output is exemplified by 16 topographic types for the world at 1-km spatial resolution (SRTM30 data), the Japanese Islands at 270 m, and part of Hokkaido at 55 m. Because the procedure is unsupervised and reflects frequency distributions of the input variables rather than pre-set criteria, the resulting classes are undefined and must be calibrated empirically by subsequent analysis. Maps of the example classifications reflect physiographic regions, geological structure, and landform as well as slope materials and processes; fine-textured terrain categories tend to correlate with erosional topography or older surfaces, coarse-textured classes with areas of little dissection. In Japan the resulting classes approximate landform types mapped from airphoto analysis, while in the Americas they create map patterns resembling Hammond's terrain types or surface-form classes; SRTM30 output for the United States compares favorably with Fenneman's physical divisions. Experiments are suggested for further developing the method; the Arc/Info AML and the map of terrain classes for the world are available as online downloads. 相似文献