首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 671 毫秒
1.
Eleven seismic reflection profiles across Shirshov Ridge and the adjacent deep-water sedimentary basins (Komandorsky and Aleutian Basins) are presented to illustrate the sediment distribution in the western Bering Sea. A prominent seismic reflecting horizon, Reflector P (Middle—Late Miocene in age), is observed throughout both the Aleutian and Komandorsky Basins at an approximate subbottom depth of 1 km. This reflector is also present, in places, on the flanks and along the crest of Shirshov Ridge. The thickness of sediments beneath Reflector P is significantly different within the two abyssal basins. In the Aleutian Basin, the total subbottom depth to acoustic basement (basalt?) is about 4 km, while in the Komandorsky Basin the depth is about 2 km.Shirshov Ridge, a Cenozoic volcanic feature that separates the Aleutian and Komandorsky Basins, is an asymmetric bathymetric ridge characterized by thick sediments along its eastern flank and steep scarps on its western side. The southern portion of the ridge has more structural relief that includes several deep, sediment-filled basins along its summit.Velocity data from sonobuoy measurements indicate that acoustic basement in the Komandorsky Basin has an average compressional wave velocity of 5.90 km/sec. This value is considerably larger than the velocities measured for acoustic basement in the northwestern Aleutian Basin (about 5.00 km/sec) and in the central Aleutian Basin (5.40–5.57 km/sec). In the northwestern Aleutian Basin, the low-velocity acoustic basement may be volcaniclastic sediments or other indurated sediments that are overlying true basaltic basement. A refracting horizon with similar velocities (4.6–5.0 km/sec) as acoustic basement dips steeply beneath the Siberian continental margin, reaching a maximum subbottom depth of about 8 km. The thick welt of sediment at the base of the Siberian margin may be the result of sediment loading or tectonic depression prior to Late Cenozoic time.  相似文献   

2.
Faults on the outer wall of the northern Peru—Chile trench, seaward of the Lima Basin, Arica Bight, and Iquique Basin, parallel the trend of Nazca plate magnetic anomalies. Where the Nazca Ridge enters the subduction zone, faulting parallels the trench, probably reflecting a lack of spreading fabric on the ridge. Seaward of the Yaquina Basin, faulting does not parallel the trench or the spreading fabric, possibly reflecting stress changes caused by N—S extension across the nearby Mendaña fracture zone. These results generally agree with a previous review of subduction-related faulting, which concluded that faults parallel the spreading fabric where it differs from the strike of the dipping slab by less than 30°.  相似文献   

3.
Geophysical data on the northern part of the Pacific Ocean were systematized to compile a map of geomagnetic and geothermal studies of the Bering Sea. The absence of reliable data about the formation time of the Bering Sea structures of oceanic and continental origins is noted; this hampered the assessment of the geodynamical processes in the North Pacific. Based on the geophysical data, we estimated the age of the structures of the Bering Sea floor such as the Commander Basin (21 My), the Shirshov Ridge (95 and 33 My in the northern and southern parts, respectively), the Aleutian Basin (70 My), the Vitus Arch (44 My), the Bowers Ridge (30 My), and the Bowers Basin (40 My). These values are confirmed by the geological, geophysical, and kinematic data. A numerical modeling of the formation of extensive regional structures (Emperor Fracture Zone, Chinook Trough, and others) in the Northern Pacific is carried out. A conclusion was made on the basis of the geological and geothermal analysis that the northern and southern parts of the Shirshov Ridge have different geological ages and different tectonic structures. The northern part of the ridge is characterized by an upthrust-nappe terrain origin, while the southern part has originated from a torn-away island arc similar to the origin of the Bowers Ridge. The sea floor of the Aleutian Basin represents a detached part of the Upper Cretaceous Kula plate, on which spreading processes took place in the Vitus Arch area in the Eocene. The final activity phase in the Bering Sea began 21 My B.P. by spreading of the ancient oceanic floor of the Commander Basin. Based on the age estimations of the structures of the Bering Sea floor, the results of the modeling of the process of formation of regional fracture zones and of the geomagnetic, geothermal, tectonic, geological, and structural data, we calculated and compiled a kinematic model (with respect to a hot spot reference system) of the northern part of the Pacific Ocean for 21 My B.P.  相似文献   

4.
Holocene sand layers cored from the central Aleutian Trench are dominated by volcaniclastic debris, and the only likely source is the central Aleutian volcanic arc. This creates something of an enigma because bathymetric obstructions seemingly prevent direct delivery of sediment via transverse canyons or channels. Turbidity currents are funneled through submarine canyons on the upper trench slope, but the flows become unconfined as they cross the midslope Aleutian Terrace. Evidently, the turbid flows maintain high enough velocities to climb over the trench-slope break; acceleration down the lower trench slope then allows forearc bypassing to occur without the aid of through-going channels.  相似文献   

5.
A 1987 survey of the offshore Peru forearc using the SeaMARC II seafloor mapping system reveals that subduction of the Nazca Ridge has resulted in uplift of the lowermost forearc by as much as 1500 m. This uplift is seen in the varied depths of two forearc terraces opposite the subducting ridge. Uplift of the forearc has caused fracturing, minor surficial slumping, and increased erosion through small canyons and gullies. Oblique trending linear features on the forearc may be faults with a strike-slip component of motion caused by the oblique subduction of the Nazca Ridge. The trench in the zone of ridge subduction is nearly linear, with no re-entrant in the forearc due to subduction of the Nazca Ridge. Compressional deformation of the forearc due to subduction of the ridge is relatively minor, suggesting that the gently sloping Nazca Ridge is able to slide beneath the forearc without significantly deforming it. The structure of the forearc is similar to that revealed by other SeaMARC II surveys to the north, consisting of: 1) a narrow zone (10 to 15 km across) of accreted material making up the lower forearc; 2) a chaotic middle forearc; 3) outcropping consolidated material and draping sediment on the upper forearc; and 4) the smooth, sedimented forearc shelf.The subducting Nazca plate and the Nazca Ridge are fractured by subduction-induced faults with offsets of up to 500 m. Normal faulting is dominant and begins about 50 km from the trench axis, increasing in frequency and offset toward the trench. These faults are predominantly trench-parallel. Reverse faults become more common in the deepest portion of the trench and often form at slight angles to the trench axis.Intrusive and extrusive volcanic areas on the Nazca plate appear to have formed well after the seafloor was created at the ridge crest. Many of the areas show evidence of current scour and are cut by faulting, however, indicating that they formed before the seafloor entered the zone of subduction-induced faulting.  相似文献   

6.
Fault patterns at outer trench walls   总被引：1，自引：0，他引：1  
Profiles across subduction-related trenches commonly show normal faulting of the outer trench wall. Such faulting is generally parallel or sub-parallel to the trench and is ascribed to tension in the upper part of the oceanic plate as it is bent into the subduction zone. A number of authors have noted that outer trench wall faulting may involve re-activation of the oceanic spreading fabric of the subducting plate, even when the trend of this fabric is noticeably oblique to the extensional stress direction. However, one previous review of outer trench wall fault patterns questioned the occurrence of a consistent link between fault orientation and such controlling factors. This latter study predated the widespread availability of swath bathymetry and longrange sidescan sonar data over trenches. Based only on profile data, it was unable to analyse fault patterns with the accuracy now possible. This paper therefore re-examines the relationship between outer trench wall faulting and the structure of the subduction zone and subducting plate using GLORIA and Seabeam swath mapping data from several locations around the Pacific and Indian Oceans. The principal conclusions is that the trend of outer trench wall faults is almost always controlled by either the subducting slab strike or by the inherited oceanic spreading fabric in the subducting plate. The latter control operates when the spreading fabric is oblique to the subducting slab strike by less than 25–30°; in all other cases the faults are parallel to slab strike (and parallel or sub-parallel to the trench). Where the angle between spreading fabric and slab strike is close to 30°, two fault trends may coexist; evidence from the Aleutian Trench indicates a gradual change from spreading fabric to slab strike control of fault trend as the angle between the two increases from 25 to 30°. The only observed exception to the above rule of fault control comes from the western Aleutian Trench, where outer trench wall faults are oblique to the slab strike, almost perpendicular to the spreading fabric, and parallel to the convergence direction. Re-orientation of the extensional stress direction due to right-lateral shear at this highly oblique plate boundary is the best explanation of this apparently anomalous observation.  相似文献   

7.
In the 300 km wide Adak-Amlia sector of the central Aleutian Trench ≈ 36 000 km3 of offscraped trench fill makes up the wedge-shaped mass of the Aleutian accretionary body. Within this wedge, seismic reflection profiles reveal an abundance of potential hydrocarbon-trapping structures. These structures include antiforms, thrust and normal faults, and stratigraphic pinchouts. Maximum closure on these features is 2 km. In addition, the silt and possibly sand size sediment within the offscraped turbidite deposits, and the porous diatomaceous pelagic deposits interbedded with and at the base of the wedge, may define suitable reservoirs for the entrapment of hydrocarbons. Potential seals for these reservoirs include diagenetically-altered and -produced siliceous and carbonate sediment. The organic carbon input into the central Aleutian Trench, based on carbon analyses of DSDP Legs 18 and 19 core samples, suggests that the average organic carbon content within the accretionary body is approximately 0.3–0.6%. Heat flow across the Aleutian Terrace indicates that at present the oil generation window lies at a depth of 3–6.5 km. At depths of 8 km (which corresponds to the maximum depth the offscraped sediment has been seismically resolved beneath the lower trench slope), the probable high (170–180°C) temperatures prohibit all but gas generation. The dewatering of trench sediment and subducted oceanic crust should produce an abundance of fluids circulating within the accretionary body. These fluids and gases can conduct hydrocarbons to any of the abundant trapping geometries or be lost from the system through sea floor seepage. In the Aleutian accretionary body all the conditions necessary for the formation of oil and gas deposits exist. The size and ultimate preservation of these deposits, however, are dependent on the deformational history of the prism both during accretion and after the accretion process has been superceded by subsequent tectonic regimes.  相似文献   

8.
Analysis of the multi-channel seismic reflection, magnetic and bathymetric data collected along a transect, 1110 km long parallel to 13° N latitude across the Bay of Bengal was made. The transect is from the continental shelf off Madras to the continental slope off Andaman Island in water depths of 525 m to 3350 m and across the Western Basin (bounded by foot of the continental slope of Madras and 85° E Ridge), the 85° E Ridge, the Central Basin (between the 85° E Ridge and the Ninetyeast Ridge), the Ninetyeast Ridge and the Sunda Arc. The study revealed eight seismic sequences, H1 to H8 of parallel continuous to discontinuous reflectors. Considering especially depth to the horizons, nature of reflection and on comparison with the published seismic reflection results of Currayet al. (1982), the early Eocene (P) and Miocene (M) unconformities and the base of the Quaternary sediments (Q) are identified on the seismic section. Marked changes in velocities also occur at their boundaries.In the Western Basin the acoustic basement deepening landward is inferred as a crystalline basement overlain by about 6.7 km of sediment. In the Central Basin possibly thicker sediments than in the Western Basin are estimated. The sediments in the Sunda Arc area are relatively thick and appears to have no distinct horizons. But the entire sedimentary section appears to be consisting of folded and possibly faulted layers.The comparatively broader wavelength magnetic anomalies of the Central Basin also indicate deeper depth of their origin. Very prominent double humped feature of the 85° E Ridge and broad basement swell of the Ninetyeast Ridge are buried under about 2.8 km thick sediments except over the prominent basement high near 92° E longitude. The positive structural relief of the buried 85° E Ridge in the area is reflected in magnetic signature of about 450 nT amplitude. Flexural bulge of the 85° E Ridge and subsidence of the Ninetyeast Ridge about 24 cm my–1 rate since early Eocene period have been inferred from the seismic sequence analysis.  相似文献   

9.
X-ray diffraction analyses show that the clay mineralogies of near-surface muds in the Gulf of Alaska (mostly illite and chlorite) are consistent with detrital sources in southern Alaska. Expandable clay minerals are derived from the Aleutian volcanic arc, and their percentages increase progressively toward the west. Smectite values are lower than expected, however, particularly in the central forearc, and there is less smectite on the insular trench slope than farther seaward. The regional clay-mineral distribution is controlled by two opposed contour currents and by the influx of suspended sediment via both transverse and trench-axis turbidity currents.  相似文献   

10.
The Three Kings Ridge has been described as a remnant arc or an east-facing arc on the western side of the South Fiji Basin under which symmetric South Fiji Basin magnetic anomaly lineations have been lost. We find evidence of neither arc-trench morphology on the eastern flank of the ridge nor collision tectonism within the adjacent South Fiji Basin that might have obliterated it. We believe there is room for the missing magnetic lineations within the South Fiji Basin and we recognize the distinctive island-arc morphology characteristic of a west-facing arc on the western flank of the Three Kings Ridge. Our interpretation requires that arc volcanism postdated formation of much of the South Fiji Basin and that oceanic lithosphere from the adjacent Norfolk Basin must have been subducted beneath the west-facing Three Kings Arc.  相似文献   

11.
The Three Kings Ridge has been reinterpreted as a west-facing island arc under which a significant amount of Norfolk Basin lithosphere may have been subducted. Examination of additional seismic reflection profiles adds credence to this interpretation and suggests the presence of a north-south transition from subduction under the northern half of the ridge, evidenced by well-preserved island-arc morphology, to obduction along the southern half of the ridge. This obduction probably obliterated the trench, resulting in overthrusting and severe deformation of the forearc basin as well as intense faulting of the volcanic arc.  相似文献   

12.
The Eastern Mediterranean Sea is a remnant of a deep Mesozoic oceanic basin, now almost totally consumed as a result of long-term plate convergence between Eurasia and Africa. The present-day surface morphology of the Eastern Mediterranean relates both to the early history of formation of the deep basins and the recent geodynamic interactions between interfering microplates. Among the most conspicuous morphologic features of the basin is an arc-shape, elongated and wide, bathymetric swell bisecting the entire basin from the Ionian to Levantine areas, known as the Mediterranean Ridge. During the last decade this tectono-sedimentary accretionary prism, which results from the Hellenic subduction, has been intensively surveyed by swath mapping, multichannel seismic profiling and deep dives. We present here, and briefly discuss, the main morphological characteristics of this feature as derived from swath bathymetric data that considerably help to better assess the lateral and north–south morphostructural variability of the Mediterranean Ridge. This study reveals that the characteristics and morphostructural variability of the Mediterranean Ridge are related to: (1) a specific incipient collision geodynamic setting south of Crete, where the African and Aegean continental margins are nearly in contact, (2) a unique regional kinematics, controlled by frontal convergence south of Crete (central Mediterranean Ridge) and oblique subduction with opposite sense of shear for the western (Ionian) and eastern (Levantine) domains of the Mediterranean Ridge, that explain the lateral variations of deformation and (3) particularities of its sedimentary cover, which includes massive salt layers within the outer Mediterranean Ridge and local salt deposits within the inner domains, that control the north–south morphostructural variability of the sedimentary wedge.  相似文献   

13.
Morphology and tectonics of the Yap Trench   总被引：5，自引：0，他引：5  
We conducted swath bathymetry and gravity surveys the whole-length of the Yap Trench, lying on the southeastern boundary of the Philippine Sea Plate. These surveys provided a detailed morphology and substantial insight into the tectonics of this area subsequent the Caroline Ridge colliding with this trench. Horst and graben structures and other indications of normal faulting were observed in the sea-ward trench seafloor, suggesting bending of the subducting oceanic plate. Major two slope breaks were commonly observed in the arc-ward trench slope. The origin of these slope breaks is thought to be thrust faults and lithological boundaries. No flat lying layered sediments were found in the trench axis. These morphological characteristics suggest that the trench is tectonically active and that subduction is presently occurring. Negative peaks of Bouguer anomalies were observed over the arc-ward trench slope. This indicates that the crust is thickest beneath the arc-ward trench slope because the crustal layers on the convergent two plates overlap. Bouguer gravity anomalies over the northern portion of the Yap Arc are positive. These gravity signals show that the Yap Arc is uplifted by dynamic force, even though dense crustal layers underlie the arc. This overlying high density arc possibly forces the trench to have great water depths of nearly 9000 m. We propose a tectonic evolution of the trench. Subduction along the Yap Trench has continued with very slow rates of convergence, although the cessation of volcanism at the Yap Arc was contemporaneous with collision of the Caroline Ridge. The Yap Trench migrated westward with respect to the Philippine Sea Plate after collision, then consumption of the volcanic arc crust occurred, caused by tectonic erosion, and the distance between the arc and the trench consequently narrowed. Lower crustal sections of the Philippine Sea Plate were exposed on the arc-ward trench slope by overthrusting. Intense shearing caused deformation of the accumulated rocks, resulting in their metamorphism in the Yap Arc.  相似文献   

14.
Seismic reflection profiles from the northern end of Juan de Fuca Ridge reveal three axial valleys having a basement relief of as much as 2 sec (two-way travel time). A thick sequence, presumably of turbidites, mainly less than 0.7 m.y. old, covers much of the area. The oldest turbidites form the upper part of the fill of a possible Tertiary trench between the ridge and North America. The second turbidite unit extends beyond the trench and once formed an abyssal plain over most of northern Juan de Fuca Ridge and the area west to Explorer Ridge. Following formation of the plain, vertical movements began that broadly uplifted the crest of Juan de Fuca Ridge, block-faulted its northern end, produced faulting along Sovanco Fracture Zone, and upwarped the basement north of the ridge. Younger turbidites have filled the lowlands created by the vertical movements. The present sea floor topography and seismic activity show evidence of continued movements.  相似文献   

15.
Bathymetry of the Tonga Trench and Forearc: a map series   总被引：1，自引：0，他引：1  
Four new bathymetric maps of the Tonga Trench and forearc between 14 °S and 27 °S display the important morphologic and structural features of this dynamic convergent margin. The maps document a number of important geologic features of the margin. Major normal faults and fault lineaments on the Tonga platform can be traced along and across the upper trench slope. Numerous submarine canyons incised in the landward slope of the trench mark the pathways of sediment transport from the platform to mid- and lower-slope basins. Discontinuities in the trench axis and changes in the morphology of the landward slope can be clearly documented and may be associated with the passage and subduction of the Louisville Ridge and other structures on the subducting Pacific Plate. Changes in the morphology of the forearc as convergence changes from normal in the south to highly-oblique in the north are clearly documented. The bathymetric compilations, gridded at 500- and 200-m resolutions and extending along 500 km of the landward trench slope and axis, provide complete coverage of the outer forearc from the latitude of the Louisville Ridge-Tonga Trench collision to the northern terminus of the Tonga Ridge. These maps should serve as a valuable reference for other sea-going programs in the region, particularly the Ocean Drilling Program (ODP) and the National Science Foundation MARGINS initiative.  相似文献   

16.
The Kyushu-Palau Ridge(KPR), a remnant arc on the Philippine Sea Plate(PSP), is subducting beneath the Kyushu, southwest Japan. Influenced by the subducting KPR, the Kyushu subduction zone corresponding to the KPR is significantly different from Shikoku subduction zone in terms of gravity anomalies, seismicity, the stress state, and the subducting slab morphology. Significant negative free-air and Bouguer gravity anomalies are observed in a prolonged area of KPR, southeast of the Miyazaki Plain, indicating that this is where KPR overlaps the overriding plate. The gravity anomaly in this area is much lower than that in other areas where the inferred KPR extends, suggesting that the subduction of the buoyant KPR may cause the lower mantle density to decrease.More earthquakes have occurred in Hyuga-nada region where the KPR subducts than in Shikoku forearc and other areas in the Kyushu forearc, indicating that the subduction of the KPR enhances the local coupling between the subducting and overriding plates. The centroid moment tensor(CMT) mechanism of earthquakes shows that stress is concentrated in the accumulated crust beneath the Kyushu forearc corresponding to the KPR, and the shallow thrusting events in the obducting plate are caused by the KPR subduction. The buoyant KPR, with a large volume of low-density sediments, was responsible for the differences of the subduction depth and dip angle of the subducting Philippine Sea(PS) slab between northern Kyushu and Shikoku. The seismic gaps and the sudden change of the dipping angle of the subducting PS slab indicate that slab tear may have occurred along the west side of the KPR beneath southwest Kyushu. A two-tear model was proposed, and the subduction of the buoyant KPR was believed to play an important role in the slab tear.  相似文献   

17.
Since the beginning of formation of Proto-Taiwan, the subducting Philippine (PH) Sea plate has moved continuously through time in the N307° direction with respect to Eurasia (EU), tearing the EU plate. The subducting EU plate includes a continental part in the north and an oceanic part in the south. The boundary B between these two domains corresponds to the eastern prolongation of the northeastern South China Sea ocean-continent transition zone. In the Huatung Basin (east of Taiwan), the Taitung Canyon is N065° oriented and is close and parallel to B. Seismic profiles show that the southern flank of the canyon corresponds to a fault with a normal component of a few tens of meters in the sediments and possible dextral shearing. Several crustal earthquakes of magnitude >%6 are located beneath the trend of the Taitung Canyon and focal mechanisms suggest that the motion is right-lateral. Thus, faulting within the sedimentary sequence beneath the Taitung Canyon is a consequence of underlying dextral strike-slip crustal motions. As the continental part of the EU slab located north of B has been recently detached, some subsequent dextral strike-slip motion might be expected within the EU slab, along the ocean-continent transition zone, which is a potential zone of weakness. We suggest that the dextral strike-slip motion along the ocean-continent boundary of the EU slab might trigger the observed dextral strike-slip motion within the overlying PH Sea crust and the associated faulting within the sediments of the Huatung Basin, beneath the Taitung Canyon. An erratum to this article is available at .  相似文献   

18.
Crustal seismic structures beneath the West Philippine Sea are determined by using explosive sources (0.5–108.6 kg) and ocean bottom seismometers to measure refracted compressional waves. Total crustal thicknesses are shown to be thinner in the eastern part of the ocean basin, approaching only 3.5 km. Crustal thinning toward the east is consistent with the Palau Kyushu Ridge being a remnant transform fault connecting the Central Basin Ridge and the Kula Pacific Ridge in the past. A velocity-depth inversion from the westernmost refraction profile indicates the upper transitional crust layer to have strong velocity gradients which gradually decrease with depth; the lower crust is characterized by a nearly constant velocity gradient. The western part of the ocean basin is also shown to have more typical oceanic thicknesses, as is found in deep ocean basins of the Pacific. Spectral energy models using WKBJ synthetic seismograms suggest that there is a sharp seismic discontinuity between the crust and moho in the western part of the basin. Predicted water depths for the West Philippine Basin using an age-depth relation and corrected for an isostatic response to the measured crustal thicknesses, are still 300 meters shallower than observed depths. The depth anomaly can not be fully reconciled by thinner crust in the eastern part of the basin. This observation implies that a deeper seated anomaly is present beneath the West Philippine Basin.  相似文献   

19.
The northern Mascarene Basin, lying between Madagascar and the Seychelles Plateau in the north-west Indian Ocean, is marked at its north-western end by the Amirante Arc, an enigmatic ridge-trench complex superficially resembling an island arc. Structural trends in the area have been mapped using GLORIA sidescan sonar data, seismic reflection profiles and bathymetric maps. It is concluded that the north-west Mascarene Basin was created during the Late Cretaceous by sea-floor spreading about a north-west trending spreading axis cut by northeast trending transform faults. A major transform fault between the northern tip of Madagascar and the western margin of the Seychelles Plateau is proposed as a boundary between the Late Cretaceous Mascarene basin and the older Somali Basin to the north-west. The northern segment of the Amirante Ridge may mark part of the transform. The southern segment of the Ridge and its associated trench are, however, wholly contained within the Late Cretaceous ocean floor of the Mascarene Basin, and are best explained as compressional features related to a change in sea-floor spreading geometry in the Late Cretaceous or earliest Tertiary. Two models for the evolution of the Mascarene Basin are proposed, the major differences between them being the amount of subduction at the southern Amirante Arc and the timing of the initial separation between India and the Seychelles.  相似文献   

20.
Abyssal hills were delineated in a 185 × 185-km area by an 18.5 × 18.5-km grid of narrow-beam bathymetric and geophysical profiles in oceanic crust of Cretaceous age near 23°N latitude, 31°W longitude. The abyssal hills are similar to features located along flow lines of sea-floor spreading near the crest of the Mid-Atlantic Ridge. This similarity indicates a primary origin for these abyssal hills related to axial processes at a mid-oceanic ridge involving construction (igneous) and tectonics (faulting), and secondary modification by volcanic activity.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号