共查询到20条相似文献,搜索用时 15 毫秒
1.
2.
3.
4.
数码相机的标定参数包括相机的内方位元素和各项镜头畸变差。从摄影测量的理论出发,通过空间前方交会试验,分析并统计了相机标定的各参数对摄影测量精度的影响。 相似文献
5.
6.
D. Schneider E. Schwalbe H.-G. Maas 《ISPRS Journal of Photogrammetry and Remote Sensing》2009,64(3):259-266
The paper focuses on the photogrammetric investigation of geometric models for different types of optical fisheye constructions (equidistant, equisolid-angle, sterographic and orthographic projection). These models were implemented and thoroughly tested in a spatial resection and a self-calibrating bundle adjustment. For this purpose, fisheye images were taken with a Nikkor 8 mm fisheye lens on a Kodak DSC 14n Pro digital camera in a hemispherical calibration room. Both, the spatial resection and the bundle adjustment resulted in a standard deviation of unit weight of 1/10 pixel with a suitable set of simultaneous calibration parameters introduced into the camera model. The camera-lens combination was treated with all of the four basic models mentioned above. Using the same set of additional lens distortion parameters, the differences between the models can largely be compensated, delivering almost the same precision parameters. The relative object space precision obtained from the bundle adjustment was ca. 1:10 000 of the object dimensions. This value can be considered as a very satisfying result, as fisheye images generally have a lower geometric resolution as a consequence of their large field of view and also have a inferior imaging quality in comparison to most central perspective lenses. 相似文献
7.
非量测数码相机由于价格低廉、使用方便等原因成为近景摄影测量获取影像的主要设备之一。但非量测相机的内方位元素和畸变系数未知,不能直接利用共线方程进行解析计算,因而必须对相机进行检校。而相机参数检校成果质量的高低直接关系着能否满足测量精度的要求。本文提出了基于二维直接线性变换(DLT)的相机标定算法,利用平面控制点解算出像点坐标和相应物点物方空间坐标之间的线性关系,再结合内方位元素及畸变参数的解算进行迭代,以得到满足一定精度要求的相机参数(x0,y0,f,k1,k2,p1,p2),并用MATLAB加以实现。 相似文献
8.
9.
Underwater photogrammetry is being used in the particularly hostile environment of the North Sea where it has been put into commercially viable operation. The authors discuss underwater photogrammetry related to other means of inspection of oil platforms. They also deal with operational experience of 35 mm and 70 mm cameras, camera calibration, the provision of control and photogrammetric observations and data analysis. The demand for underwater photogrammetry continues to grow. 相似文献
10.
数码相机检验中出现的问题及解决方法 总被引:1,自引:0,他引:1
数码相机的检验是近景摄影测量中经常碰到的问题。最常用的主要还是基于共线方程的后方交会法。但由于普通数码相机存在较大的镜头畸变,内方位元素也未知,所以仅用单片进行后方交会求取有关参数时,法方程可能会出现病态现象,从而影响最后的检验结果。文中对此现象进行了讨论,并给出了一些实用的解决方法。 相似文献
11.
12.
D. Rieke-Zapp W. Tecklenburg J. Peipe H. Hastedt Claudia Haig 《ISPRS Journal of Photogrammetry and Remote Sensing》2009,64(3):248-258
Recent tests on the geometric stability of several digital cameras that were not designed for photogrammetric applications have shown that the accomplished accuracies in object space are either limited or that the accuracy potential is not exploited to the fullest extent. A total of 72 calibrations were calculated with four different software products for eleven digital camera models with different hardware setups, some with mechanical fixation of one or more parts. The calibration procedure was chosen in accord to a German guideline for evaluation of optical 3D measuring systems [VDI/VDE, VDI/VDE 2634 Part 1, 2002. Optical 3D Measuring Systems–Imaging Systems with Point-by-point Probing. Beuth Verlag, Berlin]. All images were taken with ringflashes which was considered a standard method for close-range photogrammetry. In cases where the flash was mounted to the lens, the force exerted on the lens tube and the camera mount greatly reduced the accomplished accuracy. Mounting the ringflash to the camera instead resulted in a large improvement of accuracy in object space. For standard calibration best accuracies in object space were accomplished with a Canon EOS 5D and a 35 mm Canon lens where the focusing tube was fixed with epoxy (47 μm maximum absolute length measurement error in object space). The fixation of the Canon lens was fairly easy and inexpensive resulting in a sevenfold increase in accuracy compared with the same lens type without modification. A similar accuracy was accomplished with a Nikon D3 when mounting the ringflash to the camera instead of the lens (52 μm maximum absolute length measurement error in object space). Parameterisation of geometric instabilities by introduction of an image variant interior orientation in the calibration process improved results for most cameras. In this case, a modified Alpa 12 WA yielded the best results (29 μm maximum absolute length measurement error in object space). Extending the parameter model with FiBun software to model not only an image variant interior orientation, but also deformations in the sensor domain of the cameras, showed significant improvements only for a small group of cameras. The Nikon D3 camera yielded the best overall accuracy (25 μm maximum absolute length measurement error in object space) with this calibration procedure indicating at the same time the presence of image invariant error in the sensor domain. Overall, calibration results showed that digital cameras can be applied for an accurate photogrammetric survey and that only a little effort was sufficient to greatly improve the accuracy potential of digital cameras. 相似文献
13.
为了提升面阵相机成像定位精度,以吉林省松原市北部区域的机载面阵图像为实验对象,对成像过程进行误差分析与标定. 机载面阵相机成像存在由三个姿态角引起的定位误差以及由相机镜头畸变等因素产生的畸变误差. 针对以上问题,首先采用严密几何模型,得到面阵图像初步成像结果;然后,采用后方交会和多项式附加参数模型等方法解决内、外方位元素引起的误差问题,得到较为精确的定位结果;最后进行实验验证,测试结果表明,经过内、外方位元素的误差定标,能够控制在5 m以内的范围,精度提升94.37%,处理效果显著. 通过研究标定面阵成像过程中内、外方位元素产生的误差,提高了面阵相机定位精度,对面阵相机成像的应用和推广具有一定价值和科学参考依据. 相似文献
14.
基于偏置矩阵和探元指向角构建了线阵推扫式相机的在轨几何标定模型,并给出了相应的参数求解方法。分析了线阵推扫式相机物理内参数模型与指向角内参数模型的区别与联系,对物理模型到指向角模型的演化过程进行了推导,分析了偏视场相机与正视场相机在使用指向角模型时的不同,并分别给出了两者的具体计算公式。利用嵩山检校场高精度控制数据和天绘一号高分影像验证了本文的模型和解法。实验结果表明,本文的标定模型和求解方法可解算出稳健可靠的内参数;两次标定结果相比,95%的样本探元沿轨方向的指向差异小于0.1像元,93%的样本探元垂轨方向的指向差异小于0.2像元。经在轨几何标定,影像定位精度显著提升。 相似文献
15.
严格的相机检校是进行高精度测量和三维模型重建的基础。本文通过模拟理想影像并对之加入各种畸变,针对相机平面畸变检校模型中的径向、偏心和平面内3种畸变进行了探讨,结果发现同时考虑径向、偏心和线性3种畸变的物理检校模型要优于只考虑其中某一种或两种畸变的物理检校模型;试验结果同时表明现有物理检校模型并不能完全消除影像畸变;针对物理检校模型不能完全消除影像畸变的问题,本文引入数学检校模型(切比雪夫多项式),并提出物理检校模型和数学检校模型混合迭代检校的思想,通过模拟影像试验验证这一方法比单一使用物理模型或数学模型更能有效地降低影像畸变;最后本文对运动相机GoPro影像检校试验进一步验证了提出的混合模型迭代检校法能够更好地检校影像畸变。 相似文献
16.
随着航空摄影测量及倾斜摄影技术的不断推广,其相机传感器受内在及外在因素的影响,使得相机畸变参数的准确性并不是稳定如一,因而极大限制了数据处理的效率.针对这一问题,本文以解决相机畸变参数的准确性作为出发点,从相机成像原理出发,分析相机成像中的误差,介绍相机标定的方法,对相机标定进行实验分析,以达到准确标定相机参数的目的,... 相似文献
17.
提出了基于曲率变化的畸变差检校方法。首先对影像上提取的直线进行二分,根据重新匹配出的直线可确定实际物方直线在影像上的投影因镜头畸变而产生弯曲的程度,以此可对镜头的畸变进行检校。但对于镜头畸变较大的情况二分直线无法检测出实际曲线的弯曲程度,因此,需要对所有共线的直线进行分组,由每组直线来确定实际曲线的弯曲程度,检校镜头畸变,从而消除其对影像的影响。实验证明,通过这种方法对镜头畸变进行检校,能够得到较好的结果。 相似文献
18.
提出了基于大比例尺航空影像共面约束的相机自检校方法,该方法使用所有立体像对同名点基于共面约束对相机的内方位元素及畸变系数进行解算。首先进行航空影像同名点匹配,构建立体像对;然后基于共面约束使用直接解法和迭代优化进行相对定向,解算相机位置与姿态;最后使用最小二乘优化方法解算相机内方位元素和畸变系数。对于高分辨率大尺寸航空影像,图像中心及边缘的畸变差异较大,为了进一步提高解算精度,对图像进行网格区域划分解算畸变。使用大比例尺航空影像进行解算能真实精确反映航空摄影测量时所获取图像的相机参数和畸变系数,避免检校环境与使用环境不同解算得到的相机畸变参数不能真实反映所获取影像的畸变问题;使用所有同名点解算,避免由于选择不同特征点或控制点对检校精度的影响;通过区域网格划分,进一步提高了解算精度。对检校结果进行了分析,该方法精度较高,与基于室外检校场的精度相当,能真实精确反映航空摄影测量时所获取图像的相机参数和畸变系数,提高了三维重建的精度。 相似文献
19.
20.
非量测数码相机已广泛应用于计算机视觉、摄影测量等领域,但必须对其进行内定向和构像畸变的校正。常用的检校方法主要有室外检校法和室内检校法两类,其中利用室外三维控制场进行数码相机检校是目前较为成熟的做法,而室内三维控制场检校精度能否达到常规比例尺航空摄影要求尚未进行有效验证。通过论述一整套室内三维控制场相机检校方法,并对比分析两种检校结果表明,室内三维控制场检校精度还无法满足通用航摄精度要求。 相似文献