共查询到20条相似文献，搜索用时 31 毫秒
1.
有别于传统基于梯度信息的反演方法在正则化约束中用总梯度逼近海塞逆矩阵的技术,本文将正则化约束问题的数据拟合项和模型光滑项分开考虑,只利用数据拟合函数的梯度信息对数据拟合项的海塞矩阵进行逼近,通过求解类高斯牛顿下降方向方程得到不依赖前几次迭代正则化因子的更精确下降方向,在求解当前迭代下降方向的过程中,通过保证右端项中两个向量的二范数在同一数量级的原则,实现了正则化因子的自动更新.对理论模型的试算表明这种自适应正则化反演方案可以在拟牛顿反演框架下基本达到OCCAM的算法稳定性,反演结果对初始模型依赖性较小,同时又无需在一次迭代中多次搜索最佳正则化因子.本文还基于此算法讨论了大地电磁各参数对于反演结果的影响,由于本文的反演结果能得到充分的正则化约束,因而在此框架下讨论阻抗和倾子在反演中的作用相对更为客观. 相似文献
2.
3.
三维反演解释是电磁法勘探发展的重要趋势,而如何提高三维反演的可靠性、稳定性和计算效率是算法开发者们目前的研究重点.本文实现了一种频率域可控源电磁(CSEM)三维反演算法.其中正演基于拟态有限体积法离散化,利用直接矩阵分解技术来求解大型线性系统方程,不仅准确、稳定,而且特别有利于含有大量发射场源位置的CSEM勘探情况;对目标函数的最优化采用高斯牛顿法(GN),具有近似二次的收敛性;使用预条件共轭梯度法(PCG)求解每次GN迭代所得到的法方程,避免了显式求解和存储灵敏度矩阵,减小了计算量.以上这些方法的结合应用,使得本文的三维反演算法准确、稳定且高效.通过陆地和海洋CSEM勘探场景中的典型理论模型的反演测试,验证了本文算法的有效性. 相似文献
4.
Linearized inversion methods such as Gauss‐Newton and multiple re‐weighted least‐squares are iterative processes in which an update in the current model is computed as a function of data misfit and the gradient of data with respect to model parameters. The main advantage of those methods is their ability to refine the model parameters although they have a high computational cost for seismic inversion. In the Gauss‐Newton method a system of equations, corresponding to the sensitivity matrix, is solved in the least‐squares sense at each iteration, while in the multiple re‐weighted least‐squares method many systems are solved using the same sensitivity matrix. The sensitivity matrix arising from these methods is usually not sparse, thus limiting the use of standard preconditioners in the solution of the linearized systems. For reduction of the computational cost of the linearized inversion methods, we propose the use of preconditioners based on a partial orthogonalization of the columns of the sensitivity matrix. The new approach collapses a band of co‐diagonals of the normal equations matrix into the main diagonal, being equivalent to computing the least‐squares solution starting from a partial solution of the linear system. The preconditioning is driven by a bandwidth L which can be interpreted as the distance for which the correlation between model parameters is relevant. To illustrate the benefit of the proposed approach to the reduction of the computational cost of the inversion we apply the multiple re‐weighted least‐squares method to the 2D acoustic seismic waveform inversion problem. We verify the reduction in the number of iterations in the conjugate'gradient algorithm as the bandwidth of the preconditioners increases. This effect reduces the total computational cost of inversion as well. 相似文献
5.
Highly non-linear seismic trace inversion problems can be solved efficiently by an implementation of Tabu Search, a meta-heuristic method related to artificial intelligence. The implementation under consideration is a deterministic, global search that combines the advantages ofa local search, giving a quick descent to local misfit minima, with an ability to cross misfit barriers in the model space. Once Tabu Search has found an area of low misfit, it performs an extensive exploration of its deepest points. This property makes it possible to use Tabu Search for a semiquantitative resolution and uncertainty analysis of the inverse problem. 相似文献
6.
重力梯度数据相对于传统重力数据,能够更细致、准确地描述地球浅部构造和研究矿产资源分布等信息.本文采用共轭梯度算法,在加权密度域求解重力梯度数据三维聚焦反演最优化问题,以恢复地下三维密度分布,目标函数包括数据不拟合函数和最小支撑稳定函数.首先,在推导目标函数对加权密度的一阶导数时,为了得到更合理的计算公式,我们考虑变加权函数中含有密度变量;此外,本文通过密度上下限约束,改善了传统聚焦反演中聚焦因子选取困难的问题.新算法获得的反演结果,对聚焦因子的选择约束较少,相比传统聚焦算法,能够更容易的获得理想结果.将方法应用于理论模型验证其有效性和正确性,并应用本文方法处理文顿盐丘地区的航空全张量重力梯度数据,得到了与已知地质信息匹配的密度分布,表明本文方法具有处理实际数据的能力. 相似文献
7.
在用稀疏矩阵的LU分解技术对频率域粘弹性声波方程进行直接求解的基础上,根据失配函数二范数最小准则, 用预条件梯度类方法对粘弹性声波介质的速度结构进行了逐频反演. 局部非均匀介质模型和层状介质模型速度结构反演的实验结果表明,不同频率能够反映地下介质的多尺度物性结构（低频数据对应与介质物性的大尺度结构）,用低频反演结果作为高频反演的初值逼近这一顺序模式,能大大改善反演过程中解的非唯一性. 而且,在反演过程中用Hess矩阵的对角线元素来做梯度类方法的预条件算子,能够吸收了高斯牛顿法的二次收敛优势, 使得本文算法具有较快的收敛速度. 相似文献
8.
According to the least square criterion of minimizing the misfit between modeled and observed data,this paper provides a preconditioned gradient method to invert the visco-acoustic velocity structure on the basis of using sparse matrix LU factorization technique to directly solve the visco-acoustic wave forward problem in space-frequency domain.Numerical results obtained in an inclusion model inversion and a layered homogeneous model inversion demonstrate that different scale media have their own frequency ... 相似文献
9.
本文针对层状介质并结合梯度法波形反演,提出逐层波形反演的方法. 首先给出介质扰动响应的概念,并在此基础上分析了梯度法波形反演方法. 波形反演实质上是将实测地震记录和预测地震记录的波形残差信息转化为实际地质模型和预测地质模型的模型残差信息. 波形反演的优点是利用大量振幅相位信息得到高分辨率的反演结果, 其缺点是运行耗时大;当初始模型和实际模型相差较大时,迭代算法容易陷入局部极小点,这是因为目标函数和初始模型同实际模型间的差异是非线性的关系. 逐层波形反演方法是使自上而下每一层的目标函数最小,这样总的目标函数也是最小的. 利用二分法速度扫描确定每一层速度不仅提高了运算速度也避免了迭代算法陷入局部极小点的问题. 结合介质扰动响应和目标函数值变化可以更为准确迅速地确定每一层速度和该层界面位置. 相似文献
10.
京津唐张地区速度结构和震源位置联合反演的遗传算法 总被引：12，自引：0，他引：12
震源参数和速度结构的联合反演是一个典型的非线性名参数最优化问题，常规的局部线性化反演方法往往易于陷入局部极值，且严重依赖于初始模型的选取。模拟生物界进化的遗传算法则是一种简单而高效的全局性搜索方法。 相似文献
11.
Seismic impedance inversion is a well-known method used to obtain the image of subsurface geological structures. Utilizing the spatial coherence among seismic traces, the laterally constrained multitrace impedance inversion (LCI) is superior to trace-by-trace inversion and can produce a more realistic image of the subsurface structures. However, when the traces are numerous, it will take great computational cost and a lot of memory to solve the large-scale matrix in the multitrace inversion, which restricts the efficiency and applicability of the existing multitrace inversion algorithm. In addition, the multitrace inversion methods are not only needed to consider the lateral correlation but also should take the constraints in temporal dimension into account. As usual, these vertical constraints represent the stratigraphic characteristics of the reservoir. For instance, total-variation regularization is adopted to obtain the blocky structure. However, it still limits the magnitude of model parameter variation and therefore somewhat distorts the real image. In this paper, we propose two schemes to solve these issues. Firstly, we introduce a fast algorithm called blocky coordinate descent (BCD) to derive a new framework of laterally constrained multitrace impedance inversion. This new BCD-based inversion approach is fast and spends fewer memories. Next, we introduce a minimum gradient support regularization into the BCD-based laterally constrained inversion. This new approach can adapt to sharp layer boundaries and keep the spatial coherence. The feasibility of the proposed method is illustrated by numerical tests for both synthetic data and field seismic data. 相似文献
12.
The seismic inversion problem is a highly non‐linear problem that can be reduced to the minimization of the least‐squares criterion between the observed and the modelled data. It has been solved using different classical optimization strategies that require a monotone descent of the objective function. We propose solving the full‐waveform inversion problem using the non‐monotone spectral projected gradient method: a low‐cost and low‐storage optimization technique that maintains the velocity values in a feasible convex region by frequently projecting them on this convex set. The new methodology uses the gradient direction with a particular spectral step length that allows the objective function to increase at some iterations, guarantees convergence to a stationary point starting from any initial iterate, and greatly speeds up the convergence of gradient methods. We combine the new optimization scheme as a solver of the full‐waveform inversion with a multiscale approach and apply it to a modified version of the Marmousi data set. The results of this application show that the proposed method performs better than the classical gradient method by reducing the number of function evaluations and the residual values. 相似文献
13.
地震全波形反演(FWI)从理论走向实际面临着诸多难题,其中之一就是需要一个较高精度的初始模型,另一个难题就是需要一个较为精确的震源子波,初始模型和震源子波的准确程度严重影响着全波形反演的最终结果.为此,本文提出了不依赖子波、基于包络的FWI初始模型建立的方法,建立了相应的目标函数,推导出了反演的梯度,给出了伴随震源的表达式,理论上分析了不依赖子波FWI的可行性.在数值试验中,讨论了参考道的选取方式,通过分析归一化目标函数收敛速率,认为近偏移距参考道优于远偏移距参考道,在地震数据含干扰噪音时,平均道作为参考道要优于最小偏移距参考道.通过包络、包络对数、包络平方三种目标函数反演结果的比较,发现包络对数目标函数对深层的反演效果最好.通过不同子波的试验进一步验证了本方法的正确性. 相似文献
14.
本文采用有理函数Krylov子空间模型降阶算法实现了同时求解多频可控源电磁法三维正演响应的快速计算.首先采用基于Yee氏交错网格的拟态有限体积法实现控制方程的空间离散,将任意频率的电场响应表示为关于频率参数的传递函数.采用有理函数Krylov子空间算法求解该传递函数.针对构建m维有理函数Krylov子空间需要求解m次（几十到上百）关于有理函数极点和离散控制方程系数矩阵的线性方程组的问题,本文提出采用单个重复极点的有理函数Krylov子空间模型降阶算法,结合直接法求解器PARDISO,采用Gram-Schmidt方法,只需要1次系数矩阵分解和m次矩阵回代即可实现有理函数Krylov子空间的构建,极大地减少了计算量.针对最优化有理函数极点选取问题,本文根据传递函数的有理函数Krylov子空间投影算法的误差分析理论,引入关于单个重复极点的收敛率函数,通过求解有理函数的最大收敛率直接给出最优化的单个重复极点公式.最终实现了不同发射频率的可控源电磁法三维正演响应的快速计算.分别计算了典型层状模型多发射频率的CSAMT和海洋CSEM的正演响应,通过与解析解的对比验证了本文算法在多发射频率正演的计算精度和计算效率;并通过一个三维海洋CSEM勘探设计最优化发射频率和接收区域选取的例子进一步说明本文算法的优点. 相似文献
15.
In full waveform inversion (FWI), Hessian information of the misfit function is of vital importance for accelerating the convergence of the inversion; however, it usually is not feasible to directly calculate the Hessian matrix and its inverse. Although the limited memory Broyden-Fletcher-Goldfarb-Shanno (L-BFGS) or Hessian-free inexact Newton (HFN) methods are able to use approximate Hessian information, the information they collect is limited. The two methods can be interlaced because they are able to provide Hessian information for each other; however, the performance of the hybrid iterative method is dependent on the effective switch between the two methods. We have designed a new scheme to realize the dynamic switch between the two methods based on the decrease ratio (DR) of the misfit function (objective function), and we propose a modified hybrid iterative optimization method. In the new scheme, we compare the DR of the two methods for a given computational cost, and choose the method with a faster DR. Using these steps, the modified method always implements the most efficient method. The results of Marmousi and over thrust model testings indicate that the convergence with our modified method is significantly faster than that in the L-BFGS method with no loss of inversion quality. Moreover, our modified outperforms the enriched method by a little speedup of the convergence. It also exhibits better efficiency than the HFN method. 相似文献
16.
在实际的AVO反演问题中,叠前数据体中的噪声或其他因素严重影响了AVO反演问题的适定性,而采用先验地质信息作为AVO反演问题的约束条件是解决AVO反演问题不适定的一种可行方法. 文中的似然函数采用了[WTBX]ι[WTBX]p范数的解,并用Cauchy分布表示先验模型参数的分布. 以此为基础,在反演中建立了测井数据的参数协方差矩阵对反演过程进行约束,并采用了共轭梯度算法实现多参数非线性的反演过程. 同时,为了提高反演精度,避免动校正拉伸及依赖于炮检距的调谐效应对参数估计的影响,反演采用动校前地震数据进行参数估计. 从应用效果分析来看,即使叠前道集的信噪比不高,反演的结果也能较好地与实际情况相匹配,为识别储层流体性质提供了新的手段. 相似文献
17.
18.
19.
随着重力和重力梯度测量技术的日趋成熟,基于重力和重力梯度数据的反演技术得到了广泛关注.针对反演多解性严重、计算效率低和内存消耗大等难点问题,本文开展了三维重力和重力梯度数据的联合反演研究,该方法结合重力和重力梯度两种数据,将L0范数正则化项加入到目标函数中,并在数据空间下采用改进的共轭梯度算法求解反演最优化问题.同时,本文摒弃了依赖先验信息的深度加权函数,引入了自适应模型积分灵敏度矩阵,用来克服因重力和重力梯度数据核函数随深度增加而衰减引起的趋肤效应问题.为了提高反演计算效率,本文又推导出基于规则网格化的重力和重力梯度快速正演计算方法.模拟试算表明,改进的共轭梯度法可以降低反演的迭代次数,提高反演的收敛速度;自适应模型积分灵敏度矩阵,可以有效解决趋肤效应,提高反演纵向分辨能力;数据空间和改进的共轭梯度算法结合,可以更好地降低反演求解方程的维度,避免存储灵敏度矩阵,有效地降低反演计算时间和内存消耗量.野外实例表明,该算法可以在普通计算机下快速地获得地下密度分布模型,表现出较强的稳定性和适用性. 相似文献
20.
—?A recently developed direct search method for inversion, known as a neighbourhood algorithm (NA), is applied to the hypocentre location problem. Like some previous methods the algorithm uses randomised, or stochastic, sampling of a four-dimensional hypocentral parameter space, to search for solutions with acceptable data fit. Considerable flexibility is allowed in the choice of misfit measure.¶At each stage the hypocentral parameter space is partitioned into a series of convex polygons called Voronoi cells. Each cell surrounds a previously generated hypocentre for which the fit to the data has been determined. As the algorithm proceeds new hypocentres are randomly generated in the neighbourhood of those hypocentres with smaller data misfit. In this way all previous hypocentres guide the search, and the more promising regions of parameter space are preferentially sampled.¶The NA procedure makes use of just two tuning parameters. It is possible to choose their values so that the behaviour of the algorithm is similar to that of a contracting irregular grid in 4-D. This is the feature of the algorithm that we exploit for hypocentre location. In experiments with different events and data sources, the NA approach is able to achieve comparable or better levels of data fit than a range of alternative methods; linearised least-squares, genetic algorithms, simulated annealing and a contracting grid scheme. Moreover, convergence was achieved with a substantially reduced number of travel-time/slowness calculations compared with other nonlinear inversion techniques. Even when initial parameter bounds are very loose, the NA procedure produced robust convergence with acceptable levels of data fit. 相似文献