首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Cooling lava commonly develop polygonal joints that form equant hexagonal columns. Such fractures are formed by thermal contraction resulting in an isotropic tensional stress regime. However, certain linear cooling fracture patterns observed at some lava–ice contacts do not appear to fit the model for formation of cooling fractures and columns because of their preferred orientations. These fracture types include sheet-like (ladder-like rectangular fracture pattern), intermediate (pseudo-aligned individual column-bounding fractures), and pseudopillow (straight to arcuate fractures with perpendicular secondary fractures caused by water infiltration) fractures that form the edges of multiple columns along a single linear fracture. Despite the relatively common occurrence of these types of fractures at lava–ice contacts, their significance and mode of formation have not been fully explored. This study investigates the stress regimes responsible for producing these unique fractures and their significance for interpreting cooling histories at lava–ice contacts.Data was collected at Kokostick Butte dacite flow at South Sister, OR, and Mazama Ridge andesite flow at Mount Rainier, WA. Both of these lava flows have been interpreted as being emplaced into contact with ice and linear fracture types have been observed on their ice-contacted margins. Two different mechanisms are proposed for the formation of linear fracture networks. One possible mechanism for the formation of linear fracture patterns is marginal bulging. Melting of confining ice walls will create voids into which flowing lava can deform resulting in margin-parallel tension causing margin-perpendicular fractures. If viewed from the ice-wall, these fractures would be steeply dipping, linear fractures. Another possible mechanism for the formation of linear fracture types is gravitational settling. Pure shear during compression and settling can result in a tensional environment with similar consequences as marginal inflation. In addition to this, horizontally propagating cooling fractures will be directly influenced by viscous strain caused by the settling of the flow. This would cause preferential opening of fractures horizontally, resulting in vertically oriented fractures.It is important to note that the proposed model for the formation of linear fractures is dependent on contact with and confinement by glacial ice. The influence of flow or movement on cooling fracture patterns has not been extensively discussed in previous modeling of cooling fractures. Rapid cooling of lava by the interaction with water and ice will increase the ability to the capture and preserve perturbations in the stress regime.  相似文献   

2.
Thermal contraction joints form in the upper and lower solidifying crusts of basaltic lava flows and grow toward the interior as the crusts thicken. Lava flows are thus divided by vertical joints that, by changes in joint spacing and form, define horizontal intraflow layers known as tiers. Entablatures are tiers with joint spacings less than about 40 cm, whereas colonnades have larger joint spacings. We use structural and petrographic methods to infer heat-transfer processes and to constrain environmental conditions that produce these contrasting tiers. Joint-surface morphology indicates overall joint-growth direction and thus identifies the level in a flow where the upper and lower crusts met. Rock texture provides information on relative cooling rates in the tiers of a flow. Lava flows without entablature have textures that develop by relatively slow cooling, and two joint sets that usually meet near their middles, which indicate mostly conductive cooling. Entablature-bearing flows have two main joint sets that meet well below their middles, and textures that indicate fast cooling of entablatures and slow cooling of colonnades. Entablatures always occur in the upper joint sets and sometimes alternate several times with colonnades. Solidification times of entablature-bearing flows, constrained by lower joint-set thicknesses, are much less than those predicted by a purely conductive cooling model. These results are best explained by a cooling model based on conductive heat transfer near a flow base and water-steam convection in the upper part of an entablature-bearing flow. Calculated solidification rates in the upper parts of such flows exceed that of the upper crust of Kilauea Iki lava lake, where water-steam convection is documented. Use of the solidification rates in an available model of water-steam convection yields permeability values that agree with measured values for fractured crystalline rock. We conclude, therefore, that an entablature forms when part of a flow cools very rapidly by water-steam convection. Flooding of the flow top by surface drainage most likely induces the convection. Colonnades form under conditions of slower cooling by conductive heat transfer in the absence of water.  相似文献   

3.
Desiccation of starch-water slurries is a useful analog for the production of polygonal fractures/columnar joints in cooling lava flows. When left to dry completely, a simple mixture of 1:1 starch and water will produce columns that appear remarkably similar to natural columnar joints formed in cooled lava flows. Columns form when the accumulation of isotropic stress exceeds the tensile strength of a material, at which point a fracture forms and advances through the material perpendicular to the desiccating surface. Individual fractures will initially form orthogonal to the desiccation surface but will quickly evolve into a hexagonal fracture network that advances incrementally through the material. However, some fracture patterns found within natural lava flows are not hexagonal (Lodge and Lescinsky, 2009-this issue), but rather have fracture lengths that are much longer than the distance to adjacent fractures. These fractures are commonly found at lava flows that have interacted with glacial ice during emplacement. The purpose of this study is to utilize starch analog experiments to better understand the formation of these fractures and the stress regimes responsible for their non-hexagonal patterns.To simulate anisotropic conditions during cooling, the starch slurry was poured into a container with a movable wall that was attached to a screw-type jack. The jack was then set to slowly extend or retract while the slurry desiccated. This resulted in either a decrease or increase in the chamber cross-sectional area thus creating compressional or extensional regimes. Decreasing chamber area (DCA) experiments resulted in fractures with larger lengths parallel to the direction of wall movement (also direction of compression). It also caused localized thrust faulting and curved column development. Increasing chamber area (ICA) experiments produced a zone of horizontal column development along the expanding margin (produced when the wall detached from the sample). Within this zone vertical fracture traces were observed that extended beyond individual columns.The viscoelastic rheology of both starch-water slurries and cooling lava flows aid in the production of these long and continuous fractures. During desiccation/cooling, the total strain in the material is divided into elastic strain (stress accumulating) and viscous strain (stress relaxing). During isotropic conditions, the viscous component is also isotropic therefore stress is relaxed equally in all directions. However, if there is an existing viscous strain, such as in the DCA and ICA experiments, stress can be preferentially relaxed in a single direction resulting in fracture development with preferred orientations.  相似文献   

4.
天池火山东北侧造盾玄武岩可划分出8个流动单元,熔岩流的流动距离主要集中在30~50km,熔岩流宽度以5km左右为主。通过由野外调查获得的天池火山东北侧不同熔岩流单元的地表坡度、熔岩流厚度等,结合温度、密度与黏度等物理参数,按照熔岩流速度公式恢复的头道组和早白山组0.5m厚晶体含量5%的玄武岩熔岩流流速集中在0~1m/s之间。晶体含量为30%、厚度为0.5m的晚白山组和老房子小山组玄武岩熔岩流的流动速度集中在0~0.12m/s之间。厚度增大至2m左右,晶体含量不变的头道组和早白山组的玄武岩熔岩流流动速度可加快至11m/s。天池火山2m厚的碱性熔岩流在12h内达到或接近了它的最远距离,而各组内2m厚拉斑玄武岩熔岩流在20h内接近了最远距离。0.5m厚的熔岩流在10d内接近最大距离。50km是预计的熔岩流长度,在未来制定减灾措施时,可将此长度作为重要依据之一。天池火山熔岩流灾害主要表现为熔岩流动时对房屋建筑、农田、道路、林地、电站的毁坏,火灾及大量的人口伤亡  相似文献   

5.
Deep (> 5 m) sheeting fractures in the Navajo sandstone are evident at numerous sites in southern Utah and derive from tectonic stresses. Strong diurnal thermal cycles are, however, the likely triggers for shallow (< 0.3 m) sheeting fractures. Data from subsurface thermal sensors reveal that large temperature differences between sensors at 2 and 15 cm depth on clear summer afternoons are as great as those that trigger sheeting fractures in exposed California granite. Extensive polygonal patterns in the Navajo sandstone are composed of surface-perpendicular fractures and were produced by contractile stresses. Numerous studies have shown that porewater diminishes the tensile strength of sandstone. Based on our thermal records, we propose that cooling during monsoonal rainstorms triggers polygonal fracturing of temporarily weakened rock. On steep outcrops, polygonal patterns are rectilinear and orthogonal, with T-vertices. Lower-angle slopes host hexagonal patterns (defined by the dominance of Y-vertices). Intermediate patterns with rectangles and hexagons of similar scale are common. We posit that outcropping fractures are advancing downward by iterative steps, and that hexagons on sandstone surfaces (like prismatic columns of basalt) have evolved from ancestral orthogonal polygons of similar scale. In lava flows, fractures elongate intermittently as they follow a steep thermal gradient (the source of stress) as it rapidly moves through the rock mass. In our model, a steep, surficial thermal gradient descends through unfractured sandstone, but at the slow pace of granular disintegration. Through time, as the friable rock on stable slopes erodes, iterative cracking advances into new space. Hexagonal patterns form as new fractures, imperfectly guided by the older ones, propagate in new directions, and vertices drift into a configuration that minimizes the ratio of fracture length to polygon area. © 2020 John Wiley & Sons, Ltd.  相似文献   

6.
The pahoehoe–aa transition for a flow exposed near Bodshil village from the western part of the Deccan Volcanic Province (DVP) is reported for the first time. The 1-km-long Bodshil flow issued as a small sheet from a pre-existing lobe. Near the source, the crust is characterised by numerous squeeze-ups. A number of gaping fractures, parallel to sub-parallel to the flow direction, are exposed on the surface in the medial portion of the flow. About 800 m away, the flow completely transforms to slabby pahoehoe. The terminal portion of the flow is characterised by concentrations of slabs, blocks and lava balls. The size and concentrations of the slabs and lava balls appear to increase along the length of the flow. Petrographic studies reveal a dominant hypohyaline texture. The flow core is coarse and is characterised by plagioclase set in a glassy matrix. The presence of clinopyroxene in addition to plagioclase and glass distinguishes the crust and interslab crust from the core. On the basis of mineralogy, a temperature range of 1146±15°C to 1169±15°C is inferred for the Bodshil flow. Increased vesicle deformation across the transition is discernible and an average D-value of <0.4 indicates moderate strain rates during emplacement. In light of the morphology and petrography, the cooling history and the mode of emplacement of the Bodshil flow is discussed. The flow originated as a small toe at the leading edge of a pahoehoe flow, and grew into a sheet by the mechanism of inflation. Continuous inflation caused the brittle crust to uplift and produce a network of inflation clefts that were subsequently occupied by squeeze-ups. Temporary stagnation of the flow due to cessation of lava supply or storage allowed the crust to grow and thicken. Renewed movement of the stored and cooled lava to the flow front at a fairly high volumetric rate was responsible for the initial disruption of the crust. High rates of crustal disruption induced higher rates of degassing and cooling, which resulted in rapid crystallisation of the fluid core. Increase in crystallinity lead to the onset of yield strength, and it is envisaged that at least the terminal parts of the flow behaved as a Bingham fluid. The Bodshil flow is unique to the DVP because it is the first to record slabby pahoehoe and provide evidence for the incipient transformation of basaltic lava from pahoehoe to aa.  相似文献   

7.
 High-resolution bathymetric mapping has shown that submarine flat-topped volcanic cones, morphologically similar to ones on the deep sea floor and near mid-ocean ridges, are common on or near submarine rift zones of Kilauea, Kohala (or Mauna Kea), Mahukona, and Haleakala volcanoes. Four flat-topped cones on Kohala were explored and sampled with the Pisces V submersible in October 1998. Samples show that flat-topped cones on rift zones are constructed of tholeiitic basalt erupted during the shield stage. Similarly shaped flat-topped cones on the northwest submarine flank of Ni'ihau are apparently formed of alkalic basalt erupted during the rejuvenated stage. Submarine postshield-stage eruptions on Hilo Ridge, Mahukona, Hana Ridge, and offshore Ni'ihau form pointed cones of alkalic basalt and hawaiite. The shield stage flat-topped cones have steep (∼25°) sides, remarkably flat horizontal tops, basal diameters of 1–3 km, and heights <300 m. The flat tops commonly have either a low mound or a deep crater in the center. The rejuvenated-stage flat-topped cones have the same shape with steep sides and flat horizontal tops, but are much larger with basal diameters up to 5.5 km and heights commonly greater than 200 m. The flat tops have a central low mound, shallow crater, or levees that surrounded lava ponds as large as 1 km across. Most of the rejuvenated-stage flat-topped cones formed on slopes <10° and formed adjacent semicircular steps down the flank of Ni'ihau, rather than circular structures. All the flat-topped cones appear to be monogenetic and formed during steady effusive eruptions lasting years to decades. These, and other submarine volcanic cones of similar size and shape, apparently form as continuously overflowing submarine lava ponds. A lava pond surrounded by a levee forms above a sea-floor vent. As lava continues to flow into the pond, the lava flow surface rises and overflows the lowest point on the levee, forming elongate pillow lava flows that simultaneously build the rim outward and upward, but also dam and fill in the low point on the rim. The process repeats at the new lowest point, forming a circular structure with a flat horizontal top and steep pillowed margins. There is a delicate balance between lava (heat) supply to the pond and cooling and thickening of the floating crust. Factors that facilitate construction of such landforms include effusive eruption of lava with low volatile contents, moderate to high confining pressure at moderate to great ocean depth, long-lived steady eruption (years to decades), moderate effusion rates (probably ca. 0.1 km3/year), and low, but not necessarily flat, slopes. With higher effusion rates, sheet flows flood the slope. With lower effusion rates, pillow mounds form. Hawaiian shield-stage eruptions begin as fissure eruptions. If the eruption is too brief, it will not consolidate activity at a point, and fissure-fed flows will form a pond with irregular levees. The pond will solidify between eruptive pulses if the eruption is not steady. Lava that is too volatile rich or that is erupted in too shallow water will produce fragmental and highly vesicular lava that will accumulate to form steep pointed cones, as occurs during the post-shield stage. The steady effusion of lava on land constructs lava shields, which are probably the subaerial analogs to submarine flat-topped cones but formed under different cooling conditions. Received: 30 September 1999 / Accepted: 9 March 2000  相似文献   

8.
The initial cooling of pahoehoe flow lobes   总被引：1，自引：0，他引：1  
 In this paper we describe a new thermal model for the initial cooling of pahoehoe lava flows. The accurate modeling of this initial cooling is important for understanding the formation of the distinctive surface textures on pahoehoe lava flows as well as being the first step in modeling such key pahoehoe emplacement processes as lava flow inflation and lava tube formation. This model is constructed from the physical phenomena observed to control the initial cooling of pahoehoe flows and is not an empirical fit to field data. We find that the only significant processes are (a) heat loss by thermal radiation, (b) heat loss by atmospheric convection, (c) heat transport within the flow by conduction with temperature and porosity-dependent thermal properties, and (d) the release of latent heat during crystallization. The numerical model is better able to reproduce field measurements made in Hawai'i between 1989 and 1993 than other published thermal models. By adjusting one parameter at a time, the effect of each of the input parameters on the cooling rate was determined. We show that: (a) the surfaces of porous flows cool more quickly than the surfaces of dense flows, (b) the surface cooling is very sensitive to the efficiency of atmospheric convective cooling, and (c) changes in the glass forming tendency of the lava may have observable petrographic and thermal signatures. These model results provide a quantitative explanation for the recently observed relationship between the surface cooling rate of pahoehoe lobes and the porosity of those lobes (Jones 1992, 1993). The predicted sensitivity of cooling to atmospheric convection suggests a simple field experiment for verification, and the model provides a tool to begin studies of the dynamic crystallization of real lavas. Future versions of the model can also be made applicable to extraterrestrial, submarine, silicic, and pyroclastic flows. Received: 26 November 1994 / Accepted: 1 December 1995  相似文献   

9.
Palaeofluid-transporting systems, observed as networks of mineral-filled veins in deeply eroded parts of extinct geothermal fields, indicate that hydrofractures commonly supply fluids to geothermal fields. Here we examine well-exposed vein networks that occur at crustal depths of around 1.5 km below the initial surface of the Tertiary lava pile in North Iceland. The veins are located in the damage zone of a major fault zone that dissects basaltic lava flows, the most common host rocks of geothermal fields in Iceland. The lava flows contain numerous weaknesses, particularly columnar (cooling) joints and contacts. For hydrofractures to supply fluids to geothermal fields, the fractures must be able to propagate, and transport fluids, to the surface. We explore hydrofracture pathway formation using boundary-element models of hydrofractures with fluid overpressure varying linearly from 10 MPa at the fracture centre to 0 MPa at the fracture tip (or the fluid front). The hydrofractures propagate through a vertically jointed and horizontally layered pile of lava flows with a general rock-matrix Young’s modulus of 1×1010 Pa and a Poisson’s ratio of 0.25. The joints and contacts between layers are modelled as internal springs, each with a stiffness (‘strength’) of 6 MPa/m. The location and sizes of discontinuities, as well as the location of the hydrofracture tip, vary between the models. The results indicate that tensile stresses generated at the tip of an overpressured hydrofracture can open up horizontal and vertical discontinuities out to a considerable distance from the tip, and that these discontinuities eventually link up to form the hydrofracture pathway. Analytical models indicate that for a hot spring of a given yield associated with a fault, the dimensions of the fluid-transporting part of the fault are likely to be similar for a typical normal fault and a strike-slip fault. Also, a hot spring of yield 180 l/s (the maximum in the low-temperature fields of Iceland) can be supplied through a hydrofracture of aperture 3 mm and trace length 1.2 m. These dimensions are very similar to those of typical veins in the studied networks. Buoyancy, rather than excess pressure in the fluid source, appears to be the primary driving force of hydrofractures in the geothermal fields of Iceland.  相似文献   

10.
A seafloor lava field was mapped within the summit caldera of Axial Volcano, Juan de Fuca Ridge, using SeaMARC I sidescan sonor and submersible observations. By analogy with similar subaerial features, we infer that several volcanic seafloor features here formed by the process of lava flow inflation. Flow inflation occurs within tube-fed lava flows when lava continues to be supplied to the interior of a flow that has ceased advancing, thus uplifting the flow's rigid surface and creating a suite of characteristic surface structures. Inflated lavas require a feeder lava tube or tube system connected to a remote lava source, and therefore we infer that inflated submarine lava flows contain lava tubes. Inflated flow features identified from sidescan sonar images elsewhere on Axial Volcano and within the axial valley of the southern Juan de Fuca ridge suggest that flow inflation is a widespread submarine volcanic process.  相似文献   

11.
Segregation structures in vapor-differentiated basaltic flows   总被引：1，自引：0，他引：1  
 Vesicle cylinders represent a spectacular kind of segregation structure involving residual liquids formed in situ during the cooling of lava flows. These vertical pipes, commonly found within basalt flows typically 2–10 m thick, are interpreted as the product of a vapor-driven differentiation process. The olivine phenocrysts and the earliest generation of groundmass olivines found in cylinder-bearing basalts appear to have been generally affected by magmatic oxidation, resulting in high-temperature iddingsite (HTI) alteration. This feature is also observed within cylinder-free basalt flows which exhibit other kinds of vesicular segregation structures, such as vesicle-rich pegmatoid segregation sheets and/or segregation vesicles. Detailed textural, petrological, and geochemical characteristics of two types of cylinders, three types of vesicle sheets, and five types of segregation vesicles are described, based on the study of 12 occurrences of HTI-bearing basalt flows from oceanic shield volcanoes or continental basalt plateaus. We propose a general classification of these segregation structures likely to derive from vapor differentiation. Flow thickness is probably the main factor influencing their morphology. Finally, we suggest that the concomitant occurrence of olivine oxidation and vapor-differentiation effects results from the late persistence of water oversaturation after eruption, perhaps due to a high rate of magma ascent. Received: 27 March 1999 / Accepted: 15 February 2000  相似文献   

12.
The use of a hand-held thermal camera during the 2002–2003 Stromboli effusive eruption proved essential in tracking the development of flow field structures and in measuring related eruption parameters, such as the number of active vents and flow lengths. The steep underlying slope on which the flow field was emplaced resulted in a characteristic flow field morphology. This comprised a proximal shield, where flow stacking and inflation caused piling up of lava on the relatively flat ground of the vent zone, that fed a medial–distal lava flow field. This zone was characterized by the formation of lava tubes and tumuli forming a complex network of tumuli and flows linked by tubes. Most of the flow field was emplaced on extremely steep slopes and this had two effects. It caused flows to slide, as well as flow, and flow fronts to fail frequently, persistent flow front crumbling resulted in the production of an extensive debris field. Channel-fed flows were also characterized by development of excavated debris levees in this zone (Calvari et al. 2005). Collapse of lava flow fronts and inflation of the upper proximal lava shield made volume calculation very difficult. Comparison of the final field volume with that expecta by integrating the lava effusion rates through time suggests a loss of ~70% erupted lava by flow front crumbling and accumulation as debris flows below sea level. Derived relationships between effusion rate, flow length, and number of active vents showed systematic and correlated variations with time where spreading of volume between numerous flows caused an otherwise good correlation between effusion rate, flow length to break down. Observations collected during this eruption are useful in helping to understand lava flow processes on steep slopes, as well as in interpreting old lava–debris sequences found in other steep-sided volcanoes subject to effusive activity.  相似文献   

13.
 The Badlands rhyolite, on the Owyhee Plateau of southwestern Idaho, can be demonstrated to be a large lava flow on the basis of its geometry of large and small flow lobes, its well-exposed near-vent features, and its response to pre-existing topography. However, samples of the dense upper vitrophyre of the unit reveal a range of annealed fragmental textures, including material which closely resembles the compressed, welded glass shards which are characteristic of ignimbrites. Formation of these tuff-like textures involved processes probably common to emplacement of most silicic lava flow units. Decompression upon extrusion causes inflation of pumice at the surface of the lava flow; some of this pumice is subsequently comminuted, producing loose bubble-wall shards, bits of pumice, chips of dense glass, and fragments of phenocrysts. This debris sifts down around loose blocks and into open fractures deeper in the flow, where it can be reheated, compressed, and annealed to varying degrees. The end result is a dense vitrophyre layer (beneath the true upper, non-welded carapace breccia) which can be extremely texturally heterogeneous, with areas of flow-foliated lava occurring very near lava which in many aspects looks like welded ignimbrite, complete with flattened pumices. Identical textures in other silicic units have been cited by previous workers as evidence that those units erupted as pyroclastic flows which then underwent sufficient rheomorphism to create a flow-foliated rock which otherwise appears to be lava. The textures described herein indicate that lava flows can come to mimic rheomorphic ignimbrites, at least at scales ranging from thin sections to outcrops. Voluminous silicic units with scattered fragmental textures, but with otherwise lava-like features, are probably true effusive lava flows. Received: January 30, 1995 / Accepted: January 22, 1996  相似文献   

14.
Komatiites of the 3.5-Ga Komati Formation are ultramafic lavas (>23% MgO) erupted in a submarine, lava plain environment. Newly discovered vesicular komatiites have vesicular upper crusts disrupted by synvolcanic structures that are similar to inflation-related structures of modern lava flows. Detailed outcrop maps reveal flows with upper vesicular zones, 2-15 m thick, which were (1) rotated by differential inflation, (2) intruded by dikes from the interior of the flow, (3) extended, forming a flooded graben, and/or (4) entirely engulfed. The largest inflated structure is a tumulus with 20 m of surface relief, which was covered by a compound flow unit of spinifex flow lobes. The lava that inflated and rotated the upper vesicular crust did not vesiculate, but crystallized as a thick spinifex zone with fist-size skeletal olivine. Instead of representing rapidly cooled lava, the spinifex zone cooled slowly beneath an insulating upper crust during inflation. Overpressure of the inflating lava may have inhibited vesiculation. This work describes the oldest vesicular komatiites known, illustrates the first field evidence for inflated structures in komatiite flows, proposes a new factor in the development of spinifex zones, and concludes that the inflation model is useful for understanding the evolution of komatiite submarine flow fields.  相似文献   

15.
In laboratory experiments designed to model lava flow processes, liquid polyethylene glycol wax is forced through either a small hole or a long narrow slit onto the base of a tank of cold water, where it spreads laterally while cooling and solidifying at its surface. We observe the surface structure of the flow, and its dependence on the flow rate, thermal conditions and basal roughness. In each case, solidification of a crust during spreading gives rise to a number of different surface morphologies, each of which forms under a restricted range of conditions. The dominant morphologies, referred to as “pillows”, “rifts”, transverse folds, and marginal levees, correspond to features observed on natural lava flows. Results for radial spreading over a rough base and for spreading in two directions from the line source over both smooth and rough bases complement those reported earlier for radial spreading of solidifying wax from a point source on a smooth base. Together they indicate a robust dependence of morphology on the distance from the vent at which solid crust begins to form. This distance is, in turn, determined by the extrusion rate, the rheology of the liquid wax (or magma), the reduced gravity, the magnitude of the surface heat flux, and the amount of cooling required to solidify the flow surface. The results also indicate factors influencing the distribution of crust and its deformation, and may provide a means by which observations of surface morphology can be used to place constraints on the emplacement conditions of lava flows.  相似文献   

16.
The anisotropy of magnetic susceptibility (AMS) of lava flows is an innovative method which has been proved to be directly related to the shear history of lava. One of the advantages of this method is that it can be used in the absence of other morphological features commonly employed to study the mechanism of emplacement of lava flows. This feature of the AMS method makes it very attractive to gain insight into the mechanism of emplacement of massive, relatively featureless, long lava flows such as those forming flood basalt provinces. In this work, we report the results of the measurement of AMS as a function of vertical position within the Birkett lava flow, one of the Columbia River Basalt Group flows. The observed variation of AMS allows us to identify at least 16 discrete events of lava injection and to estimate the thickness of individual injection events. The AMS-estimated thickness of each injection event (in the range of 0.5-4.0 m) coincides with the range inferred for injected lava pulses in modern Hawaiian lava flows. Thus, the evidence provided by the AMS method supports the notion that at least some flood basalt lava flows were emplaced by the same mechanism as many present-day inflated pahoehoe flows. Regarding the orientation of the principal susceptibilities, in the central part of the flow they define a preferred orientation along an E-W trend, whereas in the outer parts of the flow they have a NNE-SSW trend. This difference in the orientation of the principal susceptibilities is interpreted as the result of a change of flow direction of the lava as emplacement progressed. Electronic supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00445-002-0203-8.  相似文献   

17.
The 1986 eruption of B fissure at Izu-Oshima Volcano, Japan, produced, among other products, one andesite and two basaltic andesite lava flows. Locally the three flows resemble vent-effused holocrystalline blocky or aa lava; however, remnant clast outlines can be identified at most localities, indicating that the flows were spatter fed or clastogenic. The basaltic andesite flows are interpreted to have formed by two main processes: (a) reconstitution of fountain-generated spatter around vent areas by syn-depositional agglutination and coalescence, followed by extensional non-particulate flow, and (b) syn-eruptive collapse of a rapidly built spatter and scoria cone by rotational slip and extensional sliding. These processes produced two morphologically distinct lobes in both flows by: (a) earlier non-particulate flow of agglutinate and coalesced spatter, which formed a thin lobe of rubbly aa lava (ca. 5 m thick) with characteristic open extension cracks revealing a homogeneous, holocrystalline interior, and (b) later scoria-cone collapse, which created a larger lobe of irregular thickness (<20 m) made of large detached blocks of scoria cone interpreted to have been rafted along on a flow of coalesced spatter. The source regions of these lava flows are characterized by horseshoe-shaped scarps (<30 m high), with meso-blocks (ca. 30 m in diameter) of bedded scoria at the base. One lava flow has a secondary lateral collapse zone with lower (ca. 7 m) scarps. Backward-tilted meso-blocks are interpreted to be the product of rotational slip, and forward-tilted blocks the result of simple toppling. Squeeze-ups of coalesced spatter along the leading edge of the meso-blocks indicate that coalescence occurred in the basal part of the scoria cone. This low-viscosity, coalesced spatter acted as a lubricating layer along which basal failure of the scoria cone occurred. Rotational sliding gave way to extensional translational sliding as the slide mass spread out onto the present caldera floor. Squeeze-ups concentrated at the distal margin indicate that the extensional regime changed to one of compression, probably as a result of cooling of the flow front. Sliding material piled up behind the slowing flow front, and coalesced spatter was squeezed up from the interior of the flow through fractures and between rafted blocks. The andesite flow, although morphologically similar to the other two flows, has a slightly different chemical composition which corresponds to the earliest stage of the eruption. It is a much smaller lava flow emitted from the base of the scoria cone 2 days after the eruption had ceased. This lava is interpreted to have been formed by post-depositional coalescence of spatter under the influence of the in-situ cooling rate and load pressure of the deposit. Extrusion occurred through the lower part of the scoria cone, and subsequent non-particulate flow of coalesced material produced a blocky and aa lava flow. The mechanisms of formation of the lava flows described may be more common during explosive eruptions of mafic magma than previously envisaged. Received: 30 May 1997 / Accepted: 19 May 1998  相似文献   

18.
The lobate distal margins of lava flows provide a useful source of morphological information on the rheology of the lava if the lobes are assumed to represent the arrest of free-flowing isothermal Bingham fluids on a slope. The widths of lobes are a more useful practical index than lobe thicknesses because they are about an order of magnitude larger and can be more accurately measured from aerial photographs and other remote images. Lobes do not suffer from the changes in morphology that channels undergo during the course of eruptions. A terrestrial data set of flow lobe and ancillary measurements from lavas throughout the range alkali olivine basalt to rhyolite shows some features that are predicted by the isothermal Bingham fluid model. These are correlation of width and thickness over more than two orders of magnitude and essentially no correlation of aspect ratio with slope. There is a positive correlation of lobe width with silica content of the lava. From a data set of measurements on lava flow lobes from the Martian volcano Olympus Mons the mean value of aspect ratio (0.07) was found to be significantly less than that for the terrestrial data set (0.19). Higher general levels of effusion rate on Olympus Mons are probably the factor responsible. After normalisation, lobe widths on Olympus Mons are found to be largely equivalent to those expected for terrestrial flows with andesitic/basaltic silica contents.  相似文献   

19.
Inclined pipe vesicles and stretched vesicles near the base of basalt flows have long been regarded as reliable flow-direction indicators. However, attempts to use such structures in the Santa Rosa Basalt of Southern California to determine regional flow patterns, paleoslope, and source of eruption yielded inconclusive and contradictory results. Orientations of 1070 vesicles at 37 localities were obtained directions of inclination from vertical were plotted on circular histograms. At any specific locality vesicle orientations typically are normally distributed through a 40–60 degree sector. Commonly a pronounced maximum lies within a 20–40 degree sector. Even at localities having bimodal or trimodal distribution patterns, most vesicles plot within a 90 degree sector. The frequency distribution of oriented vesicles at individual localities strongly suggests a limited direction of flow and implies a source in the opposite direction. Comparison of such «flow directions» from locality to locality within the same flow, however, yielded highly divergent results over short distances. Likewise, comparison of directions from different flows yielded results ranging from parallel to diametrically opposed. Composite circular histograms from three small mesas censisting of thin, flat-lying flows showed little apparent preferred direction of vesicle inclination. Possible reasons for the highly divergent readings include sub-flow surface irregularities, turbulent rather than laminar flow, and/or convection in the lava during cooling. Although inclined vesicles may well indicate motion in a flow, their use for determination of flow directions and for regional paleogeographic interpretations is questionable.  相似文献   

20.
The most voluminous eruption of natrocarbonatite lava hitherto recorded on Earth occurred at Oldoinyo Lengai in March–April 2006. The lava flows produced in this eruption range from blocky 'a'a type to smooth-surfaced inflated pahoehoe. We measured lava inflation features (i.e. one tumulus and three pressure ridges) that formed in the various pahoehoe flows emplaced in this event. The inflation features within the main crater of Oldoinyo Lengai are relatively small-scale, measuring 1-5 m in width, 2.5–24.4 m in length and with inflation clefts less than 0.4 m deep. Their small sizes are in contrast to a tumulus that formed on the northwestern slope of the volcano (situated ~1140 m below the crater floor). The tumulus is roughly circular, measures 17.5 × 16.0 m, and is cut by a 4.4 m deep axial inflation cleft exposing two separate flow units. We measured the elastic properties (i.e. shear- and bulk moduli) of natrocarbonatitic crust and find that these are similar to those reported for basaltic crust, and that there is no direct correlation between magmastatic head and pressure required to form tumuli. All inflated flows in the 2006 event were confined by lateral barriers (main crater, erosional channel or erosional gully) suggesting that the two most important factors for endogenous growth in natrocarbonatitic lava flows are (1) lateral barriers that prevent widening of the flow, and (2) influx of new material beneath the viscoelastic and brittle crust.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号