共查询到20条相似文献，搜索用时 187 毫秒
1.
Simon C George Christopher J Boreham Sandra A Minifie Stan C Teerman 《Organic Geochemistry》2002,33(12)
A suite of 18 oils from the Barrow Island oilfield, Australia, and a non-biodegraded reference oil have been analysed compositionally in order to detail the effect of minor to moderate biodegradation on C5 to C9 hydrocarbons. Carbon isotopic data for individual low molecular weight hydrocarbons were also obtained for six of the oils. The Barrow Island oils came from different production wells, reservoir horizons, and compartments, but have a common source (the Upper Jurassic Dingo Claystone Formation), with some organo-facies differences. Hydrocarbon ratios based on hopanes, steranes, alkylnaphthalenes and alkylphenanthrenes indicate thermal maturities of about 0.8% Rc for most of the oils. The co-occurrence in all the oils of relatively high amounts of 25-norhopanes with C5 to C9 hydrocarbons, aromatic hydrocarbons and cyclic alkanes implies that the oils are the result of multiple charging, with a heavily biodegraded charge being overprinted by fresher and more pristine oil. The later oil charge was itself variably biodegraded, leading to significant compositional variations across the oilfield, which help delineate compartmentalisation. Biodegradation resulted in strong depletion of n-alkanes (>95%) from most of the oils. Benzene and toluene were partially or completely removed from the Barrow Island oils by water washing. However, hydrocarbons with lower water solubility were either not affected by water washing, or water washing had only a minor effect. There are three main controls on the susceptibility to biodegradation of cyclic, branched and aromatic low molecular weight hydrocarbons: carbon skeleton, degree of alkylation, and position of alkylation. Firstly, ring preference ratios at C6 and C7 show that isoalkanes are retained preferentially relative to alkylcyclohexanes, and to some extent alkylcyclopentanes. Dimethylpentanes are substantially more resistant to biodegradation than most dimethylcyclopentanes, but methylhexanes are depleted faster than methylpentanes and dimethylcyclopentanes. For C8 and C9 hydrocarbons, alkylcyclohexanes are more resistant to biodegradation than linear alkanes. Secondly, there is a trend of lower susceptibility to biodegradation with greater alkyl substitution for isoalkanes, alkylcyclohexanes, alkylcyclopentanes and alkylbenzenes. Thirdly, the position of alkylation has a strong control, with adjacent methyl groups reducing the susceptibility of an isomer to biodegradation. 1,2,3-Trimethylbenzene is the most resistant of the C3 alkylbenzene isomers during moderate biodegradation. 2-Methylalkanes are the most susceptible branched alkanes to biodegradation, 3-methylalkanes are the most resistant and 4-methylalkanes have intermediate resistance. Therefore, terminal methyl groups are more prone to bacterial attack compared to mid-chain isomers, and C3 carbon chains are more readily utilised than C2 carbon chains. 1,1-Dimethylcyclopentane and 1,1-dimethylcyclohexane are the most resistant of the alkylcyclohexanes and alkylcyclopentanes to biodegradation. The straight-chained and branched C5–C9 alkanes are isotopically light (depleted in 13C) relative to cycloalkanes and aromatic hydrocarbons. The effects of biodegradation consistently lead to enrichment in 13C for each remaining hydrocarbon, due to preferential removal of 12C. Differences in the rates of biodegradation of low molecular weight hydrocarbons shown by compositional data are also reflected in the level of enrichment in 13C. The carbon isotopic effects of biodegradation show a decreasing level of isotopic enrichments in 13C with increasing molecular weight. This suggests that the kinetic isotope effect associated with biodegradation is site-specific and often related to a terminal carbon, where its impact on the isotopic composition becomes progressively ‘diluted’ with increasing carbon number. 相似文献
2.
In a previous study, oils in the Potwar Basin (Upper Indus) of Pakistan were correlated based on the dissimilarity of source and depositional environment of organic matter (OM) using biomarkers and bulk stable isotopes. This study is aimed at supporting the classification of Potwar Basin oils into three groups (A, B and C) using the distribution of alkylnaphthalenes, alkylphenanthrenes, alkyldibenzothiophenes, alkyldibenzofurans, alkylfluorenes, alkylbiphenyls, triaromatic steroids, methyl triaromatic steroids, retene, methyl retenes and cadalene. The higher relative abundance of specific methyl isomers of naphthalene and phenanthrene and the presence of diagnostic aromatic biomarkers clearly indicate the terrigenous and oxic depositional environment of OM for group A oil. Group B and C oils are of marine origin and the aforementioned heterocyclic and polycyclic aromatic hydrocarbons (HCs) differentiate them clearly into two different groups. The relative percentages of heterocyclic aromatic HCs reveal that the distribution of these compounds is controlled by the depositional environment of the OM. Sulfur-containing heterocyclic aromatic HCs are higher in crude oils generated from source rocks deposited in suboxic depositional environments, while oxygen-containing heterocyclic aromatic HCs in combination with alkylfluorenes are higher in marine oxic and deltaic oils. Biomarker and aromatic HC parameters do not indicate significant differences in the thermal maturity of Potwar Basin oils. Triaromatic and methyl triaromatic steroids support the division of Potwar Basin oils into the three groups and their relative abundances are related to source OM rather than thermal maturity. Significantly higher amounts of C20 and C21 triaromtic steroids and the presence or absence of long chain triaromatic steroids (C25, C26, C27, and C28) indicates that these compounds are probably formed from different biological precursors in each group. Different isomers of methyl substituted triaromatic steroids are present only for short chain compounds (C20–C22) and the origin of these compounds may be short chain methyl steranes from unknown biological precursors. 相似文献
3.
Based on quantitative GC-MS analysis of 40 crude oil samples collected from the south area of western Qaidam Basin,one of the largest saline lacustrine basins in China,the geochemical characteristics of aromatic hydrocarbons in oils were studied systematically in this paper.Among those constitutes,naphthalene(43% 59%),phenanthrene(12% 21%) and taromatic-sterane series(6% 28%) were the main ones of aromatic hydrocarbons.The ratio of aromatic hydrocarbon maturity parameter vs.saturated hydrocarbon maturity parameter C 29 20S/(20S+20R) shows that some aromatic hydrocarbon maturity parameters are not suitable for low-mature oils,including MPI,MNR,DNR,etc.Meanwhile,maturity parameters for dibenzothiophene and taromatic-sterane series are more appropriate for low maturity saline lacustrine crude oils.Based on the ratio of 4,6-DMDBT/1,4-DMDBT,the R c values are within the range of 0.59% 0.72%.However,the abundance of dibenzothiophene(DBT) is low,and the dibenzofuran(DBF) content is even lower,suggesting that the crude oils were formed in a saline lacustrine anaerobic environment.The high abundance of C 26 triaromatic steroid also indicates that the source material is brackish water-saline water with strong reducibility. 相似文献
4.
A suite of 27 oils from the Qinjiatun–Qikeshu oilfields in the Lishu Fault Depression of the Songliao Basin was analyzed using whole oil gas chromatography. In combination with the relative distribution of C27, C28, and C29 regular steranes, detailed geochemical analyses of light hydrocarbons in oil samples revealed crude oils characterized by the dual input of lower aquatic organisms and higher terrestrial plants. Several light hydrocarbon indicators suggest that the liquid hydrocarbons have maturities equivalent to vitrinite reflectances of around 0.78%–0.93%. This is consistent with the maturity determination of steranes C29 20S/(20S + 20R) and C29 ααβ/(ααα + αββ). Crude oils derived from the two distinct oilfields likely both have source rocks deposited in a lacustrine environment based on light hydrocarbon parameters and on higher molecular weight hydrocarbon parameters. The results show that light hydrocarbon data in crude oils can provide important information for understanding the geochemical characteristics of the Qinjiatun–Qikeshu oils during geologic evolution. 相似文献
5.
Aromatic hydrocarbons from benzene extracts of New Albany Shale were characterized. A biomarker that has a molecular weight of 546 and a structural configuration consistent with that of an alkyl-aromatic hydrocarbon (C40H66) was tentatively identified. It was found that the relative concentrations of the biomarker are indicative of differing levels of thermal maturity of the shale organic matter. A 40-carbon bicyclic carotenoid (C40H48) is proposed as the geochemical precursor of this biomarker. Thermal maturity of the shale organic matter can also be differentiated by observing differences in “fingerprints” as obtained by field-ionization mass spectrometry on the aromatic hydrocarbon fraction. Using this technique, we found that the more mature shale samples from southeastern Illinois contain more low molecular weight extractable aromatic hydrocarbons and the less mature shale samples from northwestern Illinois contain more high molecular weight extractable aromatic hydrocarbons. It was demonstrated that field-ionization and tandem mass spectrometric techniques through fingerprint and individual compound identification, are useful for shale aromatic hydrocarbon fraction characterization and for thermal maturation interpretation. 相似文献
6.
《Applied Geochemistry》1998,13(7):851-859
Emerging acceptance of the limitations of separate phase product recovery has spawned interest in the intrinsic alteration of residual separate phase petroleum products. In this study the geochemical changes in a continuous core through soil containing a separate phase diesel fuel #2 (SPD) in contact with groundwater are investigated. Chemical heterogeneities are shown to exist which can be attributed to weathering, particularly intrinsic biodegradation. The results show that the aliphatic hydrocarbon content is reduced and the δ13C ratio of the aliphatic hydrocarbons increased from top to bottom in the core. Both changes are thought to be due to preferential biodegradation of (isotopically lighter) n-alkanes. A slight increase in the relative abundance of shorter chain n-alkanes (<n-C17) was also observed. The distribution of the dominant aromatic hydrocarbons (C0–C3 alkyl-naphthalenes) is remarkably consistent throughout the core, although naphthalene is depleted below the oil–water interface. In spite of low oil saturation (S0), little or no evidence of biodegradation is noted at the uppermost boundary of the SPD. However, intrinsic biodegradation is evident approximately 0.3 m above the oil–water interface in spite of higher S0. The extent of the chemical changes attributable to biodegradation (described above) gradually increases below the oil–water interface, eventually reaching a maximum at the bottom of the SPD profile (∼1.2 m below the interface) where S0 is again reduced. The relatively higher level of biodegradation observed at and below the oil–water interface may be attributed to the reduced S0 in this zone. An estimate of the mass reduction in diesel fuel between the uppermost and bottommost parts of the core is calculated to be 23% (by weight), due predominantly to the biodegradation of n-alkanes. 相似文献
7.
High-temperature gas chromatography (HTGC) has enhanced our ability to characterize hydrocarbons extending to C120 in crude oils. As a result, hydrocarbons in waxes (> C20) have been observed to vary significantly between crude oils, even those presumed to originate from the same source. Prior to this development, microcrystalline waxes containing hydrocarbons above C40 were not characterized on a molecular level due to the analytical limitations of conventional gas chromatography. Routine screenings of high pour-point crude oils by high-temperature gas chromatography has revealed that high molecular weight hydrocarbons (> C40) are very common in most oils and may represent 2% of the crude oil. Precise structures, origins, and significance of these high molecular weight compounds remain elusive. As a preliminary step to expand our knowledge of these compounds their general molecular structures and formulas have been investigated in this study. Initial results suggest that the major high molecular weight compounds include a homologous series of n-alkanes, methylbranched alkanes, alkylcyclopentanes, alkylcyclohexanes, alkylbenzenes and alkylcycloalkanes. 相似文献
8.
Gel permeation chromatography (GPC) using a high performance liquid chromatography (HPLC) system was studied for the separation and enrichment of steroid and hopanoid hydrocarbons from crude oil for stable carbon isotope analysis. A crude oil sample was pretreated using silica gel chromatography and 5A molecular sieve to remove polycyclic aromatic hydrocarbons and n-alkanes. The GPC behavior of both the pretreated saturated hydrocarbon fraction of the oil and standard steroid [5α(H), 14α(H), 17α(H) C27–C29 steranes], hopanoid [17α(H) C27 trisnorhopane, 17α(H), 21β(H) C29–C32 hopanes] and triterpenoid [18α(H)-oleanane, gammacerane] mixtures were examined. The results indicate that 17α(H), 21β(H) hopanes as well as steranes could be enriched efficiently using GPC and that they could be obtained without removing n-alkanes from the oil saturated hydrocarbon fraction. The GPC behavior of steroid and triterpenoid hydrocarbons was controlled by molecular size and shape. 相似文献
9.
The effect of biodegradation on polycyclic aromatic hydrocarbons in reservoired oils from the Liaohe basin, NE China 总被引：3，自引：0，他引：3
Haiping Huang Bernard F.J. Bowler Thomas B.P. Oldenburg Steve R. Larter 《Organic Geochemistry》2004,35(11-12):1619
The occurrence and distribution of polycyclic aromatic hydrocarbons (PAHs) has been studied in oil columns from the Liaohe basin, NE China, characterized by varied degrees of biodegradation. The Es3 oil column has undergone light to moderate biodegradation – ranging from levels 2 to 5 on the [Peters, K.E., Moldowan, J.M., 1993. The Biomarker Guide: Interpreting Molecular Fossils in Petroleum and Ancient Sediments. Prentice Hall, Englewood Cliffs, NJ, p. 363] scale (abbreviated as ‘PM level’) – while the shallower Es1 column has undergone more severe biodegradation, ranging from PM level 5 to 8. Both columns show excellent vertical biodegradation gradients, with degree of biodegradation increasing with increasing depth toward the oil–water contact (OWC). The compositional gradients in the oil columns imply mass transport control on degradation rates, with degradation occurring primarily at the OWC. The diffusion of hydrocarbons to the OWC zone will be the ultimate control on the maximum degradation rate. The chemical composition and physical properties of the reservoired oils, and the ‘degradation sequence’ of chemical components are determined by mixing of fresh oil with biodegraded oil.The PAH concentrations and molecular distributions in the reservoired oils from these biodegraded columns show systematic changes with increasing degree of biodegradation. The C3+-alkylbenzenes are the first compounds to be depleted in the aromatic fraction. Concentrations of the C0–5-alkylnaphthalenes and the C0–3-alkylphenanthrenes decrease markedly during PM levels 3–5, while significant isomer variations occur at more advanced stages of biodegradation (>PM level 4).The degree of alkylation is a critical factor controlling the rate of biodegradation; in most cases the rate decreases with increasing number of alkyl substituents. However, we have observed that C3-naphthalenes concentrations decrease faster than those of C2-naphthalenes, and methylphenanthrenes concentrations decrease faster than that of phenanthrene. Demethylation of a substituted compound is inferred as a possible reaction in the biodegradation process.Differential degradation of specific alkylated isomers was observed in our sample set. The relative susceptibility of the individual dimethylnaphthalene, trimethylnaphthalene, tetramethylnaphthalene, pentamethylnaphthalene, methylphenanthrene, dimethylphenanthrene and trimethylphenanthrene isomers to biodegradation was determined. The C20 and C21 short side-chained triaromatic steroid hydrocarbons are degraded more readily than their C26–28 long side-chained counterparts. The C21–22-monoaromatic steroid hydrocarbons (MAS) appear to be more resistant to biodegradation than the C27–29-MAS.Interestingly, the most thermally stable PAH isomers are more susceptible to biodegradation than less thermally stable isomers, suggesting that selectivity during biodegradation is not solely controlled by thermodynamic stability and that susceptibility to biodegradation may be related to stereochemical structure. Many commonly used aromatic hydrocarbon maturity parameters are no longer valid after biodegradation to PM level 4 although some ratios change later than others. The distribution of PAHs coupled with knowledge of their biodegradation characteristics constitutes a useful probe for the study of biodegradation processes and can provide insight into the mechanisms of biodegradation of reservoired oil. 相似文献
10.
Crude oils from different basins in China ,Australia and New Zealand were analyzed to character-ize aromatic hydrocarbons produced in different environments by means of GC/MS .The distributions of some common compounds such as naphthalene, phenanthrene, chrysene,pyrene, fluoranthene, fluorine,dibenzothiophene and dibenzofuran were found to be related to sedimentary environments.Especially the relative contents of fluorenes ,dibenzofurans and dibenzothiophenes can be used to di-vide the oils into three types(1) saline or marine carbonate environment;(2) fresh-brackish water lake;(3) swamp and coal-bearing sequence.A romatic biomarkers (e.g.retene, nor-abietene,derivatives of lupeol and β-amyrin)represent higher plant inpults with respect to the precursors of crude oils. High contents of sulphur-containing compounds like benzothiophene and dibenzothiophene series indicate a reducing sulphur-abundant diagenetic condition .The benzohopane series (C32-C35) was identified both in hypersaline and coal-bearing basins, and it is postulated to be the result of strong bacteria activity.In all the sam-ples, a complete series of alkyl benzenes was analyzed .The similarity of its carbon-number distrbu-tion with that of n-alkanes probably suggests their genetic relationship. The distribution of the methylphenanthrene series reflects the evolution degree of crude oils,MPI holding a positive correlation with C29-sterane 20S/(20S 20R). 相似文献
11.
Xu Weimin 《中国地球化学学报》1987,6(1):76-86
Characteristics have been studied of light hydrocarbons (C1–C7) from crude oils and source rocks ranging from Devonian to Triassic in age in the Jurong Basin where carbonate rocks are dominating. The results show that light hydrocarbon compositions (C1–C7) can be used to classify organic matter types and maturities as well as to make oil-source rock correlations. It is also an effective method in organic geochemical studies of oils, gases and source rocks in terrains of old carbonate rocks. 相似文献
12.
The stable hydrogen isotopic compositions (δD) of selected aliphatic hydrocarbons (n-alkanes and isoprenoids) in eight crude oils of similar source and thermal maturity from the Upper Indus Basin (Pakistan) were measured. The oils are derived from a source rock deposited in a shallow marine environment. The low level of biodegradation under natural reservoir conditions was established on the basis of biomarker and aromatic hydrocarbon distributions. A plot of pristane/n-C17 alkane (Pr/n-C17) and/or phytane/n-C18 alkane (Ph/n-C18) ratios against American Petroleum Institute (API) gravity shows an inverse correlation. High Pr/n-C17 and Ph/n-C18 values and low API gravity values in some of the oils are consistent with relatively low levels of biodegradation. For the same oils, δD values for the n-alkanes relative to the isoprenoids are enriched in deuterium (D). The data are consistent with the removal of D-depleted low molecular weight (LMW) n-alkanes (C14–C22) from the oils. The δD values of isoprenoids do not change with progressive biodegradation and are similar for all the samples. The average D enrichment for n-alkanes with respect to the isoprenoids is found to be as much as 35‰ for the most biodegraded sample. For example, the moderately biodegraded oils show an unresolved complex mixture (UCM), loss of LMW n-alkanes (<C15) and moderate changes in the alkyl naphthalene distributions. The relative susceptibility of alkyl naphthalenes at low levels of biodegradation is discussed. The alkyl naphthalene biodegradation ratios were determined to assess the effect of biodegradation. The dimethyl, trimethyl and tetramethyl naphthalene biodegradation ratios show significant differences with increasing extent of biodegradation. 相似文献
13.
Geochemical characterisation of 18 crude oils from the Potwar Basin (Upper Indus), Pakistan is carried out in this study. Their relative thermal maturities, environment of deposition, source of organic matter (OM) and the extent of biodegradation based on the hydrocarbon (HC) distributions are investigated. A detailed oil-oil correlation of the area is established. Gas chromatography-mass spectrometry (GC-MS) analyses and bulk stable carbon and hydrogen isotopic compositions of saturated and aromatic HC fractions reveals three compositional groups of oils. Most of the oils from the basin are typically generated from shallow marine source rocks. However, group A contains terrigenous OM deposited under highly oxic/fluvio-deltaic conditions reflected by high pristane/phytane (Pr/Ph), C30 diahopane/C29Ts, diahopane/hopane and diasterane/sterane ratios and low dibenzothiophene (DBT)/phenanthrene (P) ratios. The abundance of C19-tricyclic and C24-tetracyclic terpanes are consistent with a predominant terrigenous OM source for group A. Saturated HC biomarker parameters from the rest of the oils show a predominant marine origin, however groups B and C are clearly separated by bulk δ13C and δD and the distributions of the saturated HC fractions supporting variations in source and environment of deposition of their respective source rocks. Moreover, various saturated HC biomarker ratios such as steranes/hopanes, diasteranes/steranes, C23-tricyclic/C30 hopane, C28-tricyclic/C30 hopane, total tricyclic terpanes/hopanes and C31(R + S)/C30 hopane show that two different groups are present. These biomarker ratios show that group B oils are generated from clastic-rich source rocks deposited under more suboxic depositional environments compared to group C oils. Group C oils show a relatively higher input of algal mixed with terrigenous OM, supported by the abundance of extended tricyclic terpanes (up to C41+) and steranes.Biomarker thermal maturity parameters mostly reached to their equilibrium values indicating that the source rocks for Potwar Basin oils must have reached the early to peak oil generation window, while aromatic HC parameters suggest up to late oil window thermal maturity. The extent of biodegradation of the Potwar Basin oils is determined using various saturated HC parameters and variations in bulk properties such as API gravity. Groups A and C oils are not biodegraded and show mature HC profiles, while some of the oils from group B show minor levels of biodegradation consistent with high Pr/n-C17, Ph/n-C18 and low API gravities. 相似文献
14.
This paper deals with natural temperature records in the heavy (asphaltenes) and the light fractions (C7—light hydrocarbons) of petroleum. Two sets of marine oils formed from different source rocks and petroleum systems were studied using asphaltene kinetics and light hydrocarbon analysis. Both fractions have been reported to contain information about the temperature the respective oils have been exposed to in the subsurface. These indicated temperatures generally correspond to the conditions in the source rock when expulsion occurred. Bulk kinetic analysis of reservoir oil asphaltenes as well as light hydrocarbon (LH) analysis (of dimethylpentanes) were used here in order to evaluate the expulsion temperatures. Surprisingly, when considering information coming from both fractions, an inverse trend between LHs expulsion temperatures (Ctemp) and asphaltenes (Tasph.) can be observed—high Tasph (asphaltene temperatures) occur with low LH Ctemp (light hydrocarbon expulsion temperatures) and low Tasph can be observed when Ctemp is high. These differences are of fundamental importance for the use of such geochemical data in calibrating numerical basin models. The reason for this inverse behaviour is possibly due to the different expulsion behaviour of light hydrocarbons and the heavy fraction of oils, especially when the source rocks contain only moderate amounts of organic matter. In addition it has to be considered that the temperature predictions obtained using asphaltene kinetic analysis are related to the onset temperature of petroleum expulsion, while light hydrocarbons provide, at best, average expulsion temperatures. 相似文献
15.
Based on experimental and observational evidence, a mode of origin involving evaporative fractionation is proposed for a class of petroleums enriched in light aromatic and naphthenic hydrocarbons (benzene, toluene, meta-xylene, para-xylene, methylcyclopentane, cyclohexane, and methylcyclohexane). Progressive gas loss from gas-saturated oil is suggested as the causal mechanism, with simultaneous loss of light ends in gaseous solution, and accompanying fractionation. These processes were simulated experimentally.Residual oils exhibit the following changes in their remaining light hydrocarbons, <C9: (1) increase in aromaticity (in aromatic hydrocarbons relative to normal alkanes of molecular weight); (2) increase in “normality” (in unbranched alkanes and naphthenes relative to branched isomers), and (3) decrease in paraffinicity (in paraffins relative to naphthenes). Retrogressive changes in maturity indicators take place leading to spurious evidence of immaturity in residual oils and the derived evaporative condensates.The phenomena occur in many basins, and are a key to understanding major aspects of petroleum variability. On the basis of aromaticity and paraffinicity relationships, evaporative gas-condensates are distinguishable from those generated by thermal cracking. Unfractionated thermal gas-condensates are rare. Evaporative condensates are the daughter products of oils which have suffered evaporative fractionation. 相似文献
16.
Jochen J. Brocks 《Geochimica et cosmochimica acta》2011,75(11):3196-3213
Archean shales from the Pilbara in Western Australia contain biomarkers that have been interpreted as evidence for the existence of cyanobacteria and eukaryotes 2.7 billion years (Ga) ago, with far reaching implications for the evolution of Earth’s early biosphere. To re-evaluate the provenance of the biomarkers, this study determined the spatial distribution of hydrocarbons in the original drill core material. Rock samples were cut into millimeter-thick slices, and the molecular content of each slice was analyzed. In core from the Hamersley Group (∼2.5 Ga), C<13 alkanes had gradually increasing concentrations from the surfaces to the center of the rock while the abundance of steranes, hopanes and C15+ alkanes decreased with distance from the outer surfaces. In samples from the Fortescue Group (∼2.7 Ga), hydrocarbons were overwhelmingly concentrated on rock surfaces.Two mechanisms are proposed that may have caused the inhomogeneous distribution: diffusion of petroleum products into the rock (contamination model), and leaching of indigenous hydrocarbons out of host shales driven by pressure release after drilling (‘live-oil’ effect). To test these models, the hydrocarbon distributions in the Archean shales are compared with artificially contaminated rocks as well as younger mudstones where leaching of live-oil had been observed.The results show that chromatographic phenomena associated with live-oil escape and contaminant diffusion have strong effects on molecular ratios and maturity parameters, potentially with broad implications for oil-source rock correlation studies and paleoenvironmental interpretations.For the Archean shales, the live-oil effect is consistent with some of the observed patterns, but only the contamination model fully explains the complex chromatographic fingerprints. Therefore, the biomarkers in the Pilbara samples have an anthropogenic origin, and previous conclusions about the origin of eukaryotes and oxygenic photosynthesis based on these samples are not valid.However, the study also identified indigenous molecules. The spatial distribution of particular aromatic hydrocarbons suggests they are syngenetic. Although devoid of biological information, these aromatics now represent the oldest known clearly-indigenous terrestrial liquid hydrocarbons. 相似文献
17.
Hydrous pyrolysis (closed vessel autoclaving in the presence of excess water) of organic-rich rocks is said to generate oils which closely resemble natural crude oils in their broad characteristics and composition. However there are only a few accounts of the proportions and compositions of hydrocarbons in hydrous pyrolysates and none of these discuss the aromatic hydrocarbon composition in detail. The present paper presents some data on the latter.Hydrous pyrolysis (3 days) of a dolomitic siltstone (Permian, Marl Slate) at 280, 300,320, 340 and 360°C produced significant amounts of oils in which the aromatic hydrocarbons were one and a half to two times as abundant as the saturated hydrocarbons.The overall composition of the aromatic hydrocarbons was similar to most crude oils; the major components isolated by our methods from natural oils and from pyrolysates were C1–4 alkylnaphthalenes. At the lowest pyrolysis temperature (280°C) the distributions of the more minor components of the pyrolysates (e.g. alkylphenanthrenes, aromatic steroids) were also generally similar to those found in natural crudes. However, a number of components (e.g. methylanthracenes, Diels' hydrocarbon) which are not usually reported in crudes, were also detected and the relative proportions of these increased at the higher temperatures. Hydrous pyrolysis (340°C) of an organic-rich oil shale (Jurassic, Kimmeridge) and an asphaltic-material containing no minerals produced pyrolysates in which many of these unusual compounds were also present. In addition the pyrolysate of the oil-shale contained higher proportions of organic sulphur compounds. It appears that the formation of the unusual compounds is not simply a function of the type of organic matter or mineralogy but rather of the high temperatures or fast heating rates employed. 相似文献
18.
G.T. Philippi 《Geochimica et cosmochimica acta》1974,38(6):947-966
This paper consists of two interrelated parts. In the first part, the influence of the composition of sediment organic matter on crude oil composition is discussed. The second part deals with the origin of normal paraffins in petroleum.Source beds with abundant terrestrial plant matter generate heavy hydrocarbons rich in five-ring naphthenes. Unless such source beds are exposed to a high temperature for a prolonged time, the oils released are also rich in five-ring naphthenes. Such oils are rare; thus far the only examples found are some Eocene Wilcox oils from the Texas Gulf Coast and some Eocene Green River oils from the Uinta Basin, Utah. Normally, oil source beds are not rich in terrestrial plant matter and the five-ring naphthene content of the source bed hydrocarbons, as well as that of the produced oils, is low.The n-paraffins generated by oil source beds rich in terrestrial plant matter are characterized by abnormally low (C21 + C22)/(C28 + C29) ratios of 0.6–1.2. In oils of dominantly marine origin, this ratio is in the range 1.5–5.0. The ratio of marine to terrestrial organic matter in source beds appears to influence both the naphthene composition and the n-paraffin composition of the generated oils.Evidence is presented that petroleum n-parainns originate from slow thermal cracking of fatty acids contained in fats and waxes. Reaction equations are discussed which explain the major geochemical observations, including the difference in carbon-number distribution of the assumed parental fatty acids and of their descendant n-paraffins. In normal oils, which originate mostly from fat rich marine organic matter, the n-paraffin concentration tapers off above C20. The molecular weight range of the fatty acids of plant waxes is considerably higher than that of fats. If plant waxes contribute strongly to the oil source material, the molecular weight distribution of the petroleum n-paraffins formed is abnormal and high carbon numbers in the C24-C32 range dominate. 相似文献
19.
R. Paul Philp Trevor D. Gilbert Jane Friedrich 《Geochimica et cosmochimica acta》1981,45(7):1173-1180
Bicyclanes previously reported only in heavily biodegraded Texas Gulf Coast crudes have been found to be ubiquitous in Australian crude oils of non-marine origin from four different basins. The compounds are present in oils, thought to be derived from the same or similar sources, that have undergone varying degrees of biodegradation. They are also found to be present in oils of different geological age. In addition a series of tricyclic diterpenoid hydrocarbons was common to four oils from the Gippsland Basin. Four of these compounds had the molecular formula C20H34 and mass spectral fragmentation patterns suggested they were mono-unsaturated diterpenoids. The presence of unsaturated diterpenoids in crude oils appears to be a unique observation. It is proposed that the diterpenoids may be the source of the bicyclanes also observed in these oils. 相似文献
20.
Small diameter core samples were taken from outcrops of the Permian Phosphoria Formation and the Cretaceous Pierre Shale of the Western United States to determine the effects of weathering on organic matter in shale outcrops. While the Pierre Shale core showed no evidence of weathering, the Phosphoria Formation showed significant reduction of overall organic content and pronounced changes in organic composition over the near-surface interval of the core. Total organic carbon is lower by as much as 60% over the upper 2 ft of the core. Chloroform-soluble organic matter and total hydrocarbon (C15+) concentrations are 50% lower over this same interval. The ratio of saturated to aromatic hydrocarbons decreases steadily with core depth over the upper 2.6 ft of the core. Aromatic hydrocarbons are enriched in the stable carbon-13 isotope by an average of 1.7%. over this same interval. Shallow core samples also show a loss of n-paraffins relative to branched/cyclic compounds in the saturated C15+ fraction.Although the extent of weathering is variable, certain characteristic effects are recognizable and can be applied to the interpretation of outcrop data in organic geochemical studies. 相似文献